Files
meshtastic_firmware/variants/esp32s3/rak_wismesh_tap_v2/variant.h
T
9358b2c549 fix(esp32): skip RTC timer wake on user shutdown; TAP V2 OCV and partition (#10739)
* fix(esp32): skip RTC timer wake on user shutdown

Do not arm esp_sleep_enable_timer_wakeup when msecToWake is portMAX_DELAY (UI shutdown), matching nRF52 system_off semantics.

fix(rak_wismesh_tap_v2): Tag OCV curve and 16MB partition

Add OCV_ARRAY matching WisMesh Tag for accurate SOC. Use 16MB flash partition scheme for TAP V2 hardware.

Co-authored-by: Cursor <cursoragent@cursor.com>

* Trunkt

---------

Co-authored-by: Cursor <cursoragent@cursor.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2026-06-18 16:29:54 -05:00

69 lines
1.3 KiB
C

#ifndef _VARIANT_RAK_WISMESHTAP_V2_H
#define _VARIANT_RAK_WISMESHTAP_V2_H
#define I2C_SDA 9
#define I2C_SCL 40
#define USE_SX1262
#define LORA_SCK 5
#define LORA_MISO 3
#define LORA_MOSI 6
#define LORA_CS 7
#define LORA_RESET 8
#ifdef USE_SX1262
#define SX126X_CS LORA_CS
#define SX126X_DIO1 47
#define SX126X_BUSY 48
#define SX126X_RESET LORA_RESET
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
#endif
#define SX126X_POWER_EN (4)
#define PIN_POWER_EN PIN_3V3_EN
#define PIN_3V3_EN (14)
#define LED_GREEN 46
#define LED_BLUE 45
#define PIN_LED1 LED_GREEN
#define LED_NOTIFICATION LED_BLUE
#define LED_POWER LED_GREEN
#define ledOff(pin) pinMode(pin, INPUT)
#define LED_STATE_ON 1 // State when LED is litted
#define HAS_GPS 1
#define GPS_TX_PIN 43
#define GPS_RX_PIN 44
#define SPI_MOSI (11)
#define SPI_SCK (13)
#define SPI_MISO (10)
#define SPI_CS (12)
#define BUTTON_PIN 0
#define USE_VIRTUAL_KEYBOARD 1
#define BATTERY_PIN 1
#define ADC_CHANNEL ADC_CHANNEL_0
#define ADC_MULTIPLIER 1.667
#define OCV_ARRAY 4160, 4020, 3940, 3870, 3810, 3760, 3740, 3720, 3680, 3620, 2990
#define PIN_BUZZER 38
#define HAS_SDCARD 1
#define SDCARD_USE_SPI1 1
#define SDCARD_CS 2
#define SPI_FREQUENCY 40000000
#define SPI_READ_FREQUENCY 16000000
#define SD_SPI_FREQUENCY 50000000
#endif