同时安装keil和cubeide后cubeide编译出来的玩意一直无法运行。被迫用keil开发

Signed-off-by: kevin <kevin@lmve.net>
2022-04-15 14:22:39 +08:00
parent 3347044f7f
commit 61a0c870de
232 changed files with 104290 additions and 1921 deletions
@@ -57,6 +57,10 @@ void Error_Handler(void);
 /* USER CODE END EFP */

 /* Private defines -----------------------------------------------------------*/
+#define run_led2_Pin GPIO_PIN_12
+#define run_led2_GPIO_Port GPIOB
+#define run_led_Pin GPIO_PIN_15
+#define run_led_GPIO_Port GPIOB
 /* USER CODE BEGIN Private defines */

 /* USER CODE END Private defines */
@@ -46,7 +46,7 @@
 /*#define HAL_ETH_MODULE_ENABLED   */
 /*#define HAL_FLASH_MODULE_ENABLED   */
 #define HAL_GPIO_MODULE_ENABLED
-/*#define HAL_I2C_MODULE_ENABLED   */
+#define HAL_I2C_MODULE_ENABLED
 /*#define HAL_I2S_MODULE_ENABLED   */
 /*#define HAL_IRDA_MODULE_ENABLED   */
 /*#define HAL_IWDG_MODULE_ENABLED   */
@@ -21,7 +21,7 @@

 /* Private includes ----------------------------------------------------------*/
 /* USER CODE BEGIN Includes */
-
+#include "mymain.h"
 /* USER CODE END Includes */

 /* Private typedef -----------------------------------------------------------*/
@@ -39,6 +39,7 @@
 /* USER CODE END PM */

 /* Private variables ---------------------------------------------------------*/
+ I2C_HandleTypeDef hi2c1;

 /* USER CODE BEGIN PV */

@@ -47,6 +48,7 @@
 /* Private function prototypes -----------------------------------------------*/
 void SystemClock_Config(void);
 static void MX_GPIO_Init(void);
+static void MX_I2C1_Init(void);
 /* USER CODE BEGIN PFP */

 /* USER CODE END PFP */
@@ -84,8 +86,9 @@ int main(void)

  /* Initialize all configured peripherals */
  MX_GPIO_Init();
+  MX_I2C1_Init();
  /* USER CODE BEGIN 2 */
-
+  //mymain();
  /* USER CODE END 2 */

  /* Infinite loop */
@@ -93,7 +96,12 @@ int main(void)
  while (1)
  {
    /* USER CODE END WHILE */
-
+		HAL_GPIO_WritePin(run_led_GPIO_Port, run_led_Pin, 1);
+		HAL_GPIO_WritePin(run_led2_GPIO_Port, run_led2_Pin, 1);
+		HAL_Delay(100);
+		HAL_GPIO_WritePin(run_led_GPIO_Port, run_led_Pin, 0);
+		HAL_GPIO_WritePin(run_led2_GPIO_Port, run_led2_Pin, 0);
+		HAL_Delay(100);
    /* USER CODE BEGIN 3 */
  }
  /* USER CODE END 3 */
@@ -111,13 +119,10 @@ void SystemClock_Config(void)
  /** Initializes the RCC Oscillators according to the specified parameters
  * in the RCC_OscInitTypeDef structure.
  */
-  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
-  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
-  RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1;
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
  RCC_OscInitStruct.HSIState = RCC_HSI_ON;
-  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
-  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
-  RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9;
+  RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
  {
    Error_Handler();
@@ -127,17 +132,51 @@ void SystemClock_Config(void)
  */
  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
-  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI;
  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;

-  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
+  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK)
  {
    Error_Handler();
  }
 }

+/**
+  * @brief I2C1 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_I2C1_Init(void)
+{
+
+  /* USER CODE BEGIN I2C1_Init 0 */
+
+  /* USER CODE END I2C1_Init 0 */
+
+  /* USER CODE BEGIN I2C1_Init 1 */
+
+  /* USER CODE END I2C1_Init 1 */
+  hi2c1.Instance = I2C1;
+  hi2c1.Init.ClockSpeed = 100000;
+  hi2c1.Init.DutyCycle = I2C_DUTYCYCLE_2;
+  hi2c1.Init.OwnAddress1 = 0;
+  hi2c1.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
+  hi2c1.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE;
+  hi2c1.Init.OwnAddress2 = 0;
+  hi2c1.Init.GeneralCallMode = I2C_GENERALCALL_DISABLE;
+  hi2c1.Init.NoStretchMode = I2C_NOSTRETCH_DISABLE;
+  if (HAL_I2C_Init(&hi2c1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN I2C1_Init 2 */
+
+  /* USER CODE END I2C1_Init 2 */
+
+}
+
 /**
  * @brief GPIO Initialization Function
  * @param None
@@ -145,11 +184,32 @@ void SystemClock_Config(void)
  */
 static void MX_GPIO_Init(void)
 {
+  GPIO_InitTypeDef GPIO_InitStruct = {0};

  /* GPIO Ports Clock Enable */
-  __HAL_RCC_GPIOD_CLK_ENABLE();
+  __HAL_RCC_GPIOB_CLK_ENABLE();
  __HAL_RCC_GPIOA_CLK_ENABLE();

+  /*Configure GPIO pin Output Level */
+  HAL_GPIO_WritePin(GPIOB, GPIO_PIN_12, GPIO_PIN_RESET);
+
+  /*Configure GPIO pin Output Level */
+  HAL_GPIO_WritePin(GPIOB, GPIO_PIN_15, GPIO_PIN_SET);
+
+  /*Configure GPIO pin : PB12 */
+  GPIO_InitStruct.Pin = GPIO_PIN_12;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+  HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+  /*Configure GPIO pin : PB15 */
+  GPIO_InitStruct.Pin = GPIO_PIN_15;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_PULLUP;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
+  HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
 }

 /* USER CODE BEGIN 4 */
@@ -80,6 +80,71 @@ void HAL_MspInit(void)
  /* USER CODE END MspInit 1 */
 }

+/**
+* @brief I2C MSP Initialization
+* This function configures the hardware resources used in this example
+* @param hi2c: I2C handle pointer
+* @retval None
+*/
+void HAL_I2C_MspInit(I2C_HandleTypeDef* hi2c)
+{
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+  if(hi2c->Instance==I2C1)
+  {
+  /* USER CODE BEGIN I2C1_MspInit 0 */
+
+  /* USER CODE END I2C1_MspInit 0 */
+
+    __HAL_RCC_GPIOB_CLK_ENABLE();
+    /**I2C1 GPIO Configuration
+    PB6     ------> I2C1_SCL
+    PB7     ------> I2C1_SDA
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
+    HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+    /* Peripheral clock enable */
+    __HAL_RCC_I2C1_CLK_ENABLE();
+  /* USER CODE BEGIN I2C1_MspInit 1 */
+
+  /* USER CODE END I2C1_MspInit 1 */
+  }
+
+}
+
+/**
+* @brief I2C MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param hi2c: I2C handle pointer
+* @retval None
+*/
+void HAL_I2C_MspDeInit(I2C_HandleTypeDef* hi2c)
+{
+  if(hi2c->Instance==I2C1)
+  {
+  /* USER CODE BEGIN I2C1_MspDeInit 0 */
+
+  /* USER CODE END I2C1_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_I2C1_CLK_DISABLE();
+
+    /**I2C1 GPIO Configuration
+    PB6     ------> I2C1_SCL
+    PB7     ------> I2C1_SDA
+    */
+    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_6);
+
+    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_7);
+
+  /* USER CODE BEGIN I2C1_MspDeInit 1 */
+
+  /* USER CODE END I2C1_MspDeInit 1 */
+  }
+
+}
+
 /* USER CODE BEGIN 1 */

 /* USER CODE END 1 */