fix: 修复连接状态下切换配置后断开重连导致异常的问题

问题现象：连接中切换配置 -> 断开 -> 连接，会出现连接后瞬间断开、长时间无法重连。而先断开再切换配置则正常。根因分析（三个层面的资源泄漏叠加）： 1. pumpPackets 死锁 (session.go) Disconnect() 只关闭 WebSocket transport，不关闭 TUN 设备。 TUN->WS goroutine 阻塞在 dev.Read()，pumpPackets 的 wg.Wait() 永远不返回，cleanup()（关闭 TUN/删路由）无法执行，导致 TUN 设备和路由泄漏。 2. 僵尸 eventLoop + 僵尸 IPC 连接 (view.go) onDisconnect 不清空 ipcClient、不关闭 IPC 连接，旧 eventLoop 持续运行接收广播事件。eventLoop 正常事件处理无身份校验，旧 session 的 disconnected 广播会覆盖新 session 的 connected 状态。 3. stopSession 不等待 goroutine 退出 (daemon.go) d.session = nil 在 goroutine 仍在运行时即设置，新旧 session 并发执行导致 TUN/路由冲突。无 mutex 保护并发访问。修复内容（10 项，3 个文件）： session.go: - Disconnect() 新增 dev.Close() 解除 pumpPackets 死锁 - 新增 done channel，Disconnect() 阻塞等待 run goroutine 完全退出 - run() deferred setState 跳过用户主动断开时的冗余广播 - run() 顶部 ctx.Err() 检查后补 cleanup() daemon.go: - 新增 sync.Mutex 保护 session/cancel 并发访问 - 拆分 stopSession/stopSessionLocked 避免死锁 view.go: - onDisconnect 置 ipcClient=nil + client.Close() 终止僵尸 eventLoop - eventLoop 三个事件分支均加 if current == client 身份校验 - onConnect 覆盖前清理旧 IPC client - setConnButtons 连接时禁用配置下拉框
feat: 添加服务端证书合法性验证（自定义CA/跳过验证/证书固定）
2026-07-08 20:57:50 +08:00 · 2026-07-08 11:33:36 +08:00 · 2026-07-07 20:40:48 +08:00 · 2026-07-07 20:30:16 +08:00 · 2026-07-07 20:22:22 +08:00 · 2026-07-07 20:13:50 +08:00
55 changed files with 3086 additions and 284 deletions
@@ -0,0 +1,114 @@
+name: Release
+
+on:
+  push:
+    tags:
+      - 'v*'
+  workflow_dispatch:
+    inputs:
+      version:
+        description: 'Version (e.g. 0.3.9, 不带 v 前缀)'
+        required: true
+
+permissions:
+  contents: write
+
+jobs:
+  build-macos:
+    runs-on: macos-latest
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+
+      - name: Set up Go
+        uses: actions/setup-go@v5
+        with:
+          go-version-file: go.mod
+
+      - name: Resolve version
+        id: ver
+        run: |
+          if [ "${{ github.event_name }}" = "workflow_dispatch" ]; then
+            echo "version=${{ inputs.version }}" >> "$GITHUB_OUTPUT"
+          else
+            echo "version=${GITHUB_REF_NAME#v}" >> "$GITHUB_OUTPUT"
+          fi
+
+      - name: Vet
+        run: make vet
+
+      - name: Build .app
+        run: make app SEMVER=${{ steps.ver.outputs.version }}
+
+      - name: Package .app as zip
+        run: |
+          VERSION="${{ steps.ver.outputs.version }}-$(git rev-parse --short HEAD)"
+          ditto -c -k --sequesterRsrc --keepParent LMVPN.app "LMVPN-${VERSION}-macos.zip"
+
+      - name: Upload artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: macos-build
+          path: LMVPN-*-macos.zip
+
+  build-windows:
+    runs-on: windows-latest
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+
+      - name: Set up Go
+        uses: actions/setup-go@v5
+        with:
+          go-version-file: go.mod
+
+      - name: Install make and Inno Setup
+        shell: pwsh
+        run: choco install make innosetup -y --no-progress
+
+      - name: Add MinGW to PATH
+        shell: bash
+        run: echo "C:/msys64/mingw64/bin" >> "$GITHUB_PATH"
+
+      - name: Resolve version
+        id: ver
+        shell: bash
+        run: |
+          if [ "${{ github.event_name }}" = "workflow_dispatch" ]; then
+            echo "version=${{ inputs.version }}" >> "$GITHUB_OUTPUT"
+          else
+            echo "version=${GITHUB_REF_NAME#v}" >> "$GITHUB_OUTPUT"
+          fi
+
+      - name: Vet
+        shell: bash
+        run: make vet
+
+      - name: Build installer
+        shell: bash
+        env:
+          MSYS_NO_PATHCONV: '1'
+        run: make installer-windows SEMVER=${{ steps.ver.outputs.version }} MINGW_CC=gcc SHELL=bash
+
+      - name: Upload artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: windows-build
+          path: build/LMVPN-Setup-*.exe
+
+  release:
+    needs: [build-macos, build-windows]
+    runs-on: ubuntu-latest
+    if: startsWith(github.ref, 'refs/tags/')
+    steps:
+      - name: Download artifacts
+        uses: actions/download-artifact@v4
+        with:
+          path: artifacts
+          merge-multiple: true
+
+      - name: Create release
+        uses: softprops/action-gh-release@v2
+        with:
+          files: artifacts/*
+          generate_release_notes: true
@@ -9,11 +9,14 @@ APP_BUNDLE  = $(APP_NAME).app

 GO          = go
 CGO_ENABLED = 1
+WINDRES     ?= x86_64-w64-mingw32-windres
+MINGW_CC    ?= x86_64-w64-mingw32-gcc
+SEMVER      ?= 0.4.2
 GIT_HASH    = $(shell git rev-parse --short HEAD 2>/dev/null || echo unknown)
-VERSION     = 0.2.5-$(GIT_HASH)
-LDFLAGS     = -s -w -X lmvpn/internal/ui.Version=$(VERSION)
+VERSION     = $(SEMVER)-$(GIT_HASH)
+LDFLAGS     = -s -w -X lmvpn/internal/version.Version=$(VERSION)

-.PHONY: all build app run daemon clean vet tidy fmt icon
+.PHONY: all build app run daemon clean vet tidy fmt icon icon-windows build-windows installer-windows

 ## all: build the .app bundle (default)
 all: app
@@ -32,6 +35,9 @@ app: build
 	cp $(BUILD_DIR)/$(GUI_BIN) $(APP_BUNDLE)/Contents/MacOS/$(GUI_BIN)
 	cp $(BUILD_DIR)/$(DAEMON_BIN) $(APP_BUNDLE)/Contents/MacOS/$(DAEMON_BIN)
 	cp resources/Info.plist $(APP_BUNDLE)/Contents/Info.plist
+	/usr/libexec/PlistBuddy -c "Set :CFBundleShortVersionString $(SEMVER)" \
+		-c "Set :CFBundleVersion $(GIT_HASH)" \
+		$(APP_BUNDLE)/Contents/Info.plist
 	@if [ -f resources/icon.icns ]; then \
 		cp resources/icon.icns $(APP_BUNDLE)/Contents/Resources/icon.icns; \
 	else echo "  (no icon.icns found, skipping icon)"; fi
@@ -80,3 +86,36 @@ fmt:
 ## clean: remove build artifacts
 clean:
 	rm -rf $(BUILD_DIR) $(APP_BUNDLE)
+
+## icon-windows: generate icon.ico and compile Windows resource (.syso)
+icon-windows:
+	go run resources/genico/main.go
+	$(WINDRES) -i resources/lmvpn.rc -O coff -o cmd/lmvpn/resource_windows_amd64.syso
+	$(WINDRES) -i resources/lmvpn.rc -O coff -o cmd/lmvpnd/resource_windows_amd64.syso
+	@echo "Generated Windows icon resources"
+
+## build-windows: cross-compile Windows x86_64 exes (requires mingw-w64)
+## The .syso icon resources are committed in cmd/*/; run `make icon-windows` to regenerate.
+build-windows:
+	mkdir -p $(BUILD_DIR)
+	CGO_ENABLED=1 GOOS=windows GOARCH=amd64 CC=$(MINGW_CC) \
+		$(GO) build -ldflags "$(LDFLAGS) -H windowsgui" -o $(BUILD_DIR)/$(GUI_BIN).exe ./cmd/lmvpn
+	CGO_ENABLED=1 GOOS=windows GOARCH=amd64 CC=$(MINGW_CC) \
+		$(GO) build -ldflags "$(LDFLAGS)" -o $(BUILD_DIR)/$(DAEMON_BIN).exe ./cmd/lmvpnd
+	@echo "Built $(BUILD_DIR)/$(GUI_BIN).exe and $(BUILD_DIR)/$(DAEMON_BIN).exe"
+
+## installer-windows: build exes and compile Inno Setup installer (.exe)
+## Requires ISCC on PATH (Windows) or Wine + Inno Setup 6 (macOS/Linux).
+installer-windows: build-windows
+	@echo "Compiling installer with version $(VERSION)..."
+	@if command -v ISCC >/dev/null 2>&1; then \
+		ISCC /DAppVersion=$(VERSION) installer/lmvpn.iss; \
+	elif command -v wine >/dev/null 2>&1; then \
+		wine "C:\Program Files (x86)\Inno Setup 6\ISCC.exe" /DAppVersion=$(VERSION) installer/lmvpn.iss; \
+	else \
+		echo "ERROR: ISCC not found. Install Inno Setup 6 on Windows,"; \
+		echo "       or install Wine + Inno Setup 6 on macOS/Linux."; \
+		echo "       Download: https://jrsoftware.org/isdl.php"; \
+		exit 1; \
+	fi
+	@echo "Installer: $(BUILD_DIR)/LMVPN-Setup-$(VERSION).exe"
@@ -0,0 +1,349 @@
+# LMVPN Client
+
+LMVPN 是一个基于 WebSocket 隧道与 TUN 虚拟网卡的**三层（网络层）VPN 客户端**。客户端通过 WebSocket（`ws://`/`wss://`）连接服务端，完成认证后在本地 TUN 虚拟网卡与 WebSocket 连接之间双向转发原始 IP 数据包，实现透明隧道。
+
+客户端使用 [Go](https://go.dev/) + [Fyne](https://fyne.io/) 开发，支持 macOS、Windows、Linux 三大桌面平台。
+
+> **服务端项目**：<https://github.com/wuwenfengmi1998/lmvpn_server>
+
+---
+
+## 目录
+
+- [功能特性](#功能特性)
+- [系统要求](#系统要求)
+- [各平台编译](#各平台编译)
+  - [通用前置依赖](#通用前置依赖)
+  - [macOS](#macos)
+  - [Windows（交叉编译）](#windows交叉编译)
+  - [Linux](#linux)
+  - [Make 目标速查表](#make-目标速查表)
+- [运行使用](#运行使用)
+- [配置与数据目录](#配置与数据目录)
+- [架构概览](#架构概览)
+- [开发指南](#开发指南)
+- [注意事项](#注意事项)
+
+---
+
+## 功能特性
+
+- **双进程架构**：GUI（`lmvpn`，普通用户）+ 守护进程（`lmvpnd`，root/管理员），自动拉起与生命周期管理
+- **多种认证**：JWT 令牌 / 用户名密码
+- **隧道模式**：全量隧道、分流隧道（按目标绕过）、自定义隧道
+- **多服务器管理**：配置文件 + SQLite 存储多个服务器配置（Profile）
+- **国际化**：中文（简体）、英文，跟随系统语言
+- **安全存储**：macOS Keychain / Windows Credential Manager 加密保存凭据
+- **系统集成**：系统托盘图标、Dock 显隐、开机自启
+- **日志轮转**：基于 lumberjack 的文件日志自动轮转
+
+---
+
+## 系统要求
+
+| 平台 | 最低版本 | 架构 | 备注 |
+|------|---------|------|------|
+| macOS | 11.0（Big Sur） | amd64 / arm64 | 需 Xcode Command Line Tools |
+| Windows | 10 | x86_64 | 仅支持 64 位，需 WinTun 驱动（已内置） |
+| Linux | 现代发行版 | amd64 / arm64 | 需 OpenGL/GLFW/libdbus 开发库 |
+
+**所有平台均要求 `CGO_ENABLED=1`**（Fyne 依赖 OpenGL/GLFW 的 CGO 绑定，不可关闭）。
+
+---
+
+## 各平台编译
+
+### 通用前置依赖
+
+- **Go 1.26** 或更高版本（见 `go.mod`）
+- **Git**：用于在编译时注入版本号，格式为 `0.3.7-<git短哈希>`（如 `0.3.7-019df7b`）
+- **C 编译器**：GCC（Linux/Windows 交叉编译）或 clang（macOS），由 CGO 调用
+- **网络访问**：首次构建需拉取 Go 模块依赖
+
+版本号通过 `-ldflags "-X lmvpn/internal/version.Version=$(VERSION)"` 在链接期注入到 `internal/version` 包，GUI 与守护进程共享同一版本字符串。
+
+### macOS
+
+#### 依赖
+
+- **Xcode Command Line Tools**：提供 clang（CGO）、Cocoa 框架、`sips`、`iconutil`（图标生成）
+
+  ```bash
+  xcode-select --install
+  ```
+
+- 最低部署目标 macOS 11.0（见 `resources/Info.plist` 的 `LSMinimumSystemVersion`）
+
+#### 编译命令
+
+```bash
+# 默认目标：编译二进制并组装 LMVPN.app bundle
+make            # 等价于 make app
+
+# 仅编译裸二进制（build/lmvpn、build/lmvpnd），不打包 .app
+make build
+
+# 重新生成 macOS 图标 resources/icon.icns（需要 icon.png 或 logo.svg）
+make icon
+
+# 编译并直接运行 GUI
+make run
+```
+
+`make app` 会将 `build/lmvpn`、`build/lmvpnd` 连同 `resources/Info.plist`、`resources/icon.icns` 组装成 `LMVPN.app/`。
+
+#### 运行
+
+守护进程创建 TUN 网卡与修改路由需要 root 权限，GUI 通过 `osascript ... with administrator privileges` 弹出系统授权对话框提权拉起守护进程。日常使用直接双击 `LMVPN.app` 即可。
+
+---
+
+### Windows（交叉编译）
+
+Windows 版本从 macOS 或 Linux **交叉编译**生成（Fyne 无法用 `CGO_ENABLED=0` 构建，因此必须借助 mingw-w64 提供 C 交叉编译器）。仅支持 **x86_64** 架构。
+
+#### 依赖
+
+- **mingw-w64 工具链**：提供 `x86_64-w64-mingw32-gcc`（C 编译器）与 `x86_64-w64-mingw32-windres`（资源编译器）
+
+  ```bash
+  # macOS
+  brew install mingw-w64
+  ```
+
+- **Inno Setup 6**（仅打包安装程序时需要）：用于生成 `.exe` 安装包
+  - 原生 Windows：将 `ISCC` 加入 `PATH`
+  - macOS/Linux：通过 Wine 调用，需安装 Wine 并将 Inno Setup 6 装到 Wine 的 `C:\Program Files (x86)\Inno Setup 6\`
+
+#### 编译命令
+
+```bash
+# 1. 生成 Windows 图标与资源（.ico + .syso），并交叉编译 exe
+make build-windows
+
+# 2. 单独生成图标资源（生成 resource_windows_amd64.syso，会被 go build 自动链接）
+make icon-windows
+
+# 3. 编译并打包 Inno Setup 安装程序
+make installer-windows
+```
+
+`make build-windows` 实际执行：
+
+```bash
+# GUI（带 -H windowsgui，无控制台窗口）
+CGO_ENABLED=1 GOOS=windows GOARCH=amd64 CC=x86_64-w64-mingw32-gcc \
+    go build -ldflags "-s -w -X ... -H windowsgui" -o build/lmvpn.exe ./cmd/lmvpn
+
+# 守护进程（控制台程序）
+CGO_ENABLED=1 GOOS=windows GOARCH=amd64 CC=x86_64-w64-mingw32-gcc \
+    go build -ldflags "-s -w -X ..." -o build/lmvpnd.exe ./cmd/lmvpnd
+```
+
+产物：`build/lmvpn.exe`、`build/lmvpnd.exe`，安装包 `build/LMVPN-Setup-<version>.exe`。
+
+#### 关于 WinTun
+
+Windows 版使用 [WinTun](https://www.wintun.net/) 驱动创建虚拟网卡。`wintun.dll` 在编译期通过 `//go:embed` 嵌入二进制，运行时释放到 exe 同级目录；安装包也会单独安装一份 `wintun.dll`。
+
+#### 运行
+
+守护进程需要管理员权限，GUI 通过 UAC（`ShellExecuteW` + `runas`）提权拉起。
+
+---
+
+### Linux
+
+Linux 没有独立的 Make 目标，使用平台无关的 `make build` 原生编译。
+
+#### 依赖
+
+- **GCC**（CGO 编译器）
+- **OpenGL 与 GLFW 开发库**（Fyne 依赖）：`libgl`、`libglfw`、`libx11`、xorg 开发头
+- **libdbus-1 开发库**（系统托盘，经 `godbus/dbus`）：`libdbus-1-dev` 或对应开发包
+
+> 请根据所用发行版（apt / dnf / pacman 等）自行安装上述开发库。
+
+#### 编译命令
+
+```bash
+# 原生编译（平台无关，直接产出 build/lmvpn、build/lmvpnd）
+make build
+
+# 编译并运行 GUI
+make run
+
+# 以 root 运行守护进程（调试用）
+make daemon
+```
+
+#### 运行
+
+- TUN 网卡创建与路由配置需要 **root 或 `CAP_NET_ADMIN`** 能力
+- 提权方式：`pkexec`（`internal/ui/elevation_other.go`）
+- 系统命令依赖：`ip`、`ip route`（`internal/route/route_linux.go`、`internal/tun/tun_linux.go`）
+- **密钥链**：Linux 暂使用内存存储（不持久化），重启后凭据丢失，后续需接入 Secret Service 等后端
+
+---
+
+### Make 目标速查表
+
+| 目标 | 说明 |
+|------|------|
+| `make` / `make all` / `make app` | 编译并组装 macOS `LMVPN.app` bundle（默认） |
+| `make build` | 仅编译 `lmvpn` + `lmvpnd` 裸二进制（macOS/Linux 原生） |
+| `make run` | 编译并运行 GUI |
+| `make daemon` | 编译并以 `sudo` 运行守护进程 |
+| `make build-windows` | 交叉编译 Windows x64 exe（含图标资源生成） |
+| `make icon-windows` | 生成 Windows `.ico` 与 `.syso` 资源文件 |
+| `make installer-windows` | 编译 exe 并打包 Inno Setup 安装程序 |
+| `make icon` | 由 `icon.png`/`logo.svg` 重新生成 macOS `icon.icns` |
+| `make vet` | 运行 `go vet ./...` |
+| `make fmt` | 运行 `go fmt ./...` |
+| `make tidy` | 运行 `go mod tidy` |
+| `make clean` | 清理 `build/` 与 `LMVPN.app/` |
+
+---
+
+## 运行使用
+
+GUI 会自动管理守护进程的生命周期（拉起、停止），无需手动启动 `lmvpnd`。
+
+- **macOS**：双击 `LMVPN.app`，首次连接时系统弹出授权对话框输入密码以提权守护进程
+- **Windows**：运行安装包或直接运行 `lmvpn.exe`，首次连接时 UAC 弹窗确认提权
+- **Linux**：`make run` 或运行编译好的 `lmvpn`，首次连接时 `pkexec` 弹窗输入密码提权
+
+GUI 与守护进程通过本地 IPC 通信：macOS/Linux 使用 Unix socket `/tmp/lmvpn.sock`；Windows 使用 TCP `127.0.0.1:18923`（因 Windows 上 AF_UNIX 有完整性级别校验，会阻止非提权 GUI 访问提权守护进程的 socket）。
+
+---
+
+## 配置与数据目录
+
+各平台的数据目录布局（Bundle ID 为 `com.lmvpn.client`）：
+
+| 平台 | 配置/数据 | 缓存 | 日志 |
+|------|----------|------|------|
+| macOS | `~/Library/Application Support/com.lmvpn.client/` | `~/Library/Caches/com.lmvpn.client/` | `~/Library/Logs/com.lmvpn.client/` |
+| Windows | `%APPDATA%\com.lmvpn.client\` | `%LOCALAPPDATA%\com.lmvpn.client\` | 同数据目录下 `log/` |
+| Linux | `~/.local/share/com.lmvpn.client/` | `~/.cache/com.lmvpn.client/` | `~/.local/state/com.lmvpn.client/log/` |
+
+- 配置文件支持 TOML 与 YAML 两种格式（`internal/config`）
+- 服务器配置（Profile）存储于 SQLite 数据库（`internal/db`，使用纯 Go 的 `modernc.org/sqlite`，无需 CGO）
+- 凭据保存于系统密钥链（macOS Keychain / Windows Credential Manager / Linux 内存）
+
+---
+
+## 架构概览
+
+### 双进程设计
+
+```
+┌──────────────┐   IPC (Unix socket / TCP)   ┌──────────────┐
+│   lmvpn      │ ◄─────────────────────────► │   lmvpnd     │
+│   (GUI)      │      控制命令 / 状态         │  (守护进程)   │
+│  Fyne UI     │                             │  WebSocket   │
+│  普通用户     │                             │  TUN 网卡    │
+│              │                             │  root/管理员  │
+└──────────────┘                             └──────┬───────┘
+                                                    │
+                                              WebSocket (ws/wss)
+                                                    ▼
+                                              ┌──────────────┐
+                                              │  LMVPN 服务端 │
+                                              └──────────────┘
+```
+
+拆分 GUI 与守护进程的原因：避免 Fyne（及其 locale/字体初始化）加载进 root 进程，同时让提权范围最小化——仅守护进程需要 root 权限操作网卡与路由。
+
+### 目录结构
+
+```
+lmvpn_client/
+├── cmd/
+│   ├── lmvpn/          # GUI 入口
+│   └── lmvpnd/         # 守护进程入口
+├── internal/
+│   ├── auth/           # 认证（JWT / 用户名密码）
+│   ├── config/         # 配置文件解析（TOML / YAML）
+│   ├── daemon/         # 守护进程生命周期、IPC、提权拉起
+│   ├── db/             # SQLite 存储、Profile、日志记录
+│   ├── i18n/           # 国际化（en / zh-Hans）
+│   ├── ipc/            # GUI ↔ 守护进程 IPC 协议
+│   ├── keychain/       # 密钥链（darwin/windows/other）
+│   ├── log/            # 日志（lumberjack 轮转）
+│   ├── model/          # 数据模型
+│   ├── paths/          # 平台路径解析（darwin/windows/other）
+│   ├── protocol/       # 与服务端的 WebSocket 协议
+│   ├── route/          # 路由管理（全量/分流/自定义）
+│   ├── stats/          # 流量统计
+│   ├── transport/      # WebSocket 传输层
+│   ├── tun/            # TUN 虚拟网卡（darwin/linux/windows）
+│   ├── ui/             # Fyne 界面、托盘、提权、Dock
+│   ├── version/        # 版本号（链接期注入）
+│   └── vpn/            # VPN 会话管理
+├── resources/          # 图标、Info.plist、wintun.dll、资源生成器
+├── installer/          # Inno Setup 安装脚本（lmvpn.iss）
+├── docs/               # 开发文档（协议规范）
+└── Makefile
+```
+
+### 平台适配约定
+
+项目使用 Go 文件后缀构建约束实现平台适配，主要分布：
+
+| 模块 | macOS | Windows | Linux |
+|------|-------|---------|-------|
+| `tun` | `tun_darwin.go`（water/utun） | `tun_windows.go`（wintun + embed dll） | `tun_linux.go`（water/tun） |
+| `route` | `route_darwin.go`（`route`） | `route_windows.go`（`route`） | `route_linux.go`（`ip route`） |
+| `keychain` | `keychain_darwin.go`（Keychain） | `keychain_windows.go`（Credential Manager） | `keychain_other.go`（内存） |
+| `paths` | `paths_darwin.go` | `paths_windows.go` | `paths_other.go`（XDG） |
+| `daemon` 提权 | `launch_unix.go` + osascript | `launch_windows.go` + UAC runas | `launch_unix.go` + pkexec |
+| `ui` Dock | `dock_darwin.go`（Cocoa CGO） | `dock_other.go`（no-op） | `dock_other.go`（no-op） |
+
+---
+
+## 开发指南
+
+```bash
+# 静态检查
+make vet
+
+# 格式化
+make fmt
+
+# 整理依赖
+make tidy
+
+# 清理构建产物
+make clean
+```
+
+### 添加新平台适配
+
+如需适配新的平台能力，参考现有约定新增带构建约束的文件，例如：
+
+- TUN 实现 → `internal/tun/tun_<os>.go`
+- 路由命令 → `internal/route/route_<os>.go`
+- 密钥存储 → `internal/keychain/keychain_<os>.go`
+- 路径解析 → `internal/paths/paths_<os>.go`
+
+### 协议规范
+
+客户端与服务端的完整通信协议见 [`docs/client-development.md`](docs/client-development.md)（含认证、握手、数据面、心跳、错误码等）。
+
+---
+
+## 注意事项
+
+- **不支持移动端**：虽 Fyne 支持 Android/iOS，本项目未配置移动端构建目标与适配代码
+- **Windows 仅 x64**：交叉编译仅目标 `GOARCH=amd64`，内置的 `wintun.dll` 为 x64 版本
+- **Linux 密钥链待完善**：当前为内存存储，凭据不持久化，生产环境建议接入 Secret Service
+- **CI/CD**：通过 GitHub Actions 自动构建 macOS / Windows 产物并发布 Release（见 [`.github/workflows/release.yml`](.github/workflows/release.yml)），打 `v*` tag 即触发
+- **CGO 必开**：任何平台都不可关闭 CGO，否则 Fyne 无法编译
+- **版本一致性**：GUI 与守护进程共享同一版本字符串，若版本不一致通常意味着旧守护进程仍在运行
+
+---
+
+## 许可证
+
+详见仓库 LICENSE 文件。
@@ -4,10 +4,12 @@ go 1.26

 require (
 	github.com/BurntSushi/toml v1.5.0
+	github.com/danieljoos/wincred v1.2.3
 	github.com/gorilla/websocket v1.5.3
 	github.com/jeandeaual/go-locale v0.0.0-20250612000132-0ef82f21eade
 	github.com/nicksnyder/go-i18n/v2 v2.5.1
 	github.com/songgao/water v0.0.0-20200317203138-2b4b6d7c09d8
+	golang.zx2c4.com/wintun v0.0.0-20230126152724-0fa3db229ce2
 	gopkg.in/natefinch/lumberjack.v2 v2.2.1
 	gopkg.in/yaml.v3 v3.0.1
 	modernc.org/sqlite v1.34.1
@@ -54,7 +56,7 @@ require (
 	github.com/mattn/go-isatty v0.0.20 // indirect
 	github.com/ncruces/go-strftime v0.1.9 // indirect
 	github.com/remyoudompheng/bigfft v0.0.0-20230129092748-24d4a6f8daec // indirect
-	golang.org/x/sys v0.46.0 // indirect
+	golang.org/x/sys v0.46.0
 	modernc.org/gc/v3 v3.0.0-20240107210532-573471604cb6 // indirect
 	modernc.org/libc v1.55.3 // indirect
 	modernc.org/mathutil v1.6.0 // indirect
@@ -4,6 +4,8 @@ fyne.io/systray v1.12.1 h1:ygBD6aZXwiOmZoY5N+ukbH9pih0Kq6fYgVeMYbr5skQ=
 fyne.io/systray v1.12.1/go.mod h1:RVwqP9nYMo7h5zViCBHri2FgjXF7H2cub7MAq4NSoLs=
 github.com/BurntSushi/toml v1.5.0 h1:W5quZX/G/csjUnuI8SUYlsHs9M38FC7znL0lIO+DvMg=
 github.com/BurntSushi/toml v1.5.0/go.mod h1:ukJfTF/6rtPPRCnwkur4qwRxa8vTRFBF0uk2lLoLwho=
+github.com/danieljoos/wincred v1.2.3 h1:v7dZC2x32Ut3nEfRH+vhoZGvN72+dQ/snVXo/vMFLdQ=
+github.com/danieljoos/wincred v1.2.3/go.mod h1:6qqX0WNrS4RzPZ1tnroDzq9kY3fu1KwE7MRLQK4X0bs=
 github.com/davecgh/go-spew v1.1.1 h1:vj9j/u1bqnvCEfJOwUhtlOARqs3+rkHYY13jYWTU97c=
 github.com/davecgh/go-spew v1.1.1/go.mod h1:J7Y8YcW2NihsgmVo/mv3lAwl/skON4iLHjSsI+c5H38=
 github.com/dustin/go-humanize v1.0.1 h1:GzkhY7T5VNhEkwH0PVJgjz+fX1rhBrR7pRT3mDkpeCY=
@@ -83,6 +85,8 @@ github.com/srwiley/oksvg v0.0.0-20221011165216-be6e8873101c h1:km8GpoQut05eY3GiY
 github.com/srwiley/oksvg v0.0.0-20221011165216-be6e8873101c/go.mod h1:cNQ3dwVJtS5Hmnjxy6AgTPd0Inb3pW05ftPSX7NZO7Q=
 github.com/srwiley/rasterx v0.0.0-20220730225603-2ab79fcdd4ef h1:Ch6Q+AZUxDBCVqdkI8FSpFyZDtCVBc2VmejdNrm5rRQ=
 github.com/srwiley/rasterx v0.0.0-20220730225603-2ab79fcdd4ef/go.mod h1:nXTWP6+gD5+LUJ8krVhhoeHjvHTutPxMYl5SvkcnJNE=
+github.com/stretchr/objx v0.5.2 h1:xuMeJ0Sdp5ZMRXx/aWO6RZxdr3beISkG5/G/aIRr3pY=
+github.com/stretchr/objx v0.5.2/go.mod h1:FRsXN1f5AsAjCGJKqEizvkpNtU+EGNCLh3NxZ/8L+MA=
 github.com/stretchr/testify v1.11.1 h1:7s2iGBzp5EwR7/aIZr8ao5+dra3wiQyKjjFuvgVKu7U=
 github.com/stretchr/testify v1.11.1/go.mod h1:wZwfW3scLgRK+23gO65QZefKpKQRnfz6sD981Nm4B6U=
 github.com/yuin/goldmark v1.7.8 h1:iERMLn0/QJeHFhxSt3p6PeN9mGnvIKSpG9YYorDMnic=
@@ -102,6 +106,8 @@ golang.org/x/text v0.22.0 h1:bofq7m3/HAFvbF51jz3Q9wLg3jkvSPuiZu/pD1XwgtM=
 golang.org/x/text v0.22.0/go.mod h1:YRoo4H8PVmsu+E3Ou7cqLVH8oXWIHVoX0jqUWALQhfY=
 golang.org/x/tools v0.24.1 h1:vxuHLTNS3Np5zrYoPRpcheASHX/7KiGo+8Y4ZM1J2O8=
 golang.org/x/tools v0.24.1/go.mod h1:YhNqVBIfWHdzvTLs0d8LCuMhkKUgSUKldakyV7W/WDQ=
+golang.zx2c4.com/wintun v0.0.0-20230126152724-0fa3db229ce2 h1:B82qJJgjvYKsXS9jeunTOisW56dUokqW/FOteYJJ/yg=
+golang.zx2c4.com/wintun v0.0.0-20230126152724-0fa3db229ce2/go.mod h1:deeaetjYA+DHMHg+sMSMI58GrEteJUUzzw7en6TJQcI=
 gopkg.in/check.v1 v0.0.0-20161208181325-20d25e280405/go.mod h1:Co6ibVJAznAaIkqp8huTwlJQCZ016jof/cbN4VW5Yz0=
 gopkg.in/check.v1 v1.0.0-20200227125254-8fa46927fb4f h1:BLraFXnmrev5lT+xlilqcH8XK9/i0At2xKjWk4p6zsU=
 gopkg.in/check.v1 v1.0.0-20200227125254-8fa46927fb4f/go.mod h1:Co6ibVJAznAaIkqp8huTwlJQCZ016jof/cbN4VW5Yz0=
@@ -0,0 +1,417 @@
+; *** Inno Setup version 6.5.0+ Chinese Simplified messages ***
+;
+; To download user-contributed translations of this file, go to:
+;   https://jrsoftware.org/files/istrans/
+;
+; Note: When translating this text, do not add periods (.) to the end of
+; messages that didn't have them already, because on those messages Inno
+; Setup adds the periods automatically (appending a period would result in
+; two periods being displayed).
+;
+; Maintainer: Zhenghan Yang (Kira)
+; Email: 847320916@QQ.com
+; Github: https://github.com/kira-96/Inno-Setup-Chinese-Simplified-Translation
+; Encoding: UTF-8
+; Translation based on network resource
+;
+
+[LangOptions]
+; The following three entries are very important. Be sure to read and
+; understand the '[LangOptions] section' topic in the help file.
+LanguageName=简体中文
+; About LanguageID, to reference link:
+; https://docs.microsoft.com/en-us/openspecs/windows_protocols/ms-lcid/a9eac961-e77d-41a6-90a5-ce1a8b0cdb9c
+LanguageID=$0804
+; LanguageCodePage should always be set if possible, even if this file is Unicode
+; For English it's set to zero anyway because English only uses ASCII characters
+LanguageCodePage=936
+; If the language you are translating to requires special font faces or
+; sizes, uncomment any of the following entries and change them accordingly.
+;DialogFontName=
+;DialogFontSize=9
+;DialogFontBaseScaleWidth=7
+;DialogFontBaseScaleHeight=15
+;WelcomeFontName=Segoe UI
+;WelcomeFontSize=14
+
+[Messages]
+
+; *** Application titles
+SetupAppTitle=安装
+SetupWindowTitle=安装 - %1
+UninstallAppTitle=卸载
+UninstallAppFullTitle=%1 卸载
+
+; *** Misc. common
+InformationTitle=信息
+ConfirmTitle=确认
+ErrorTitle=错误
+
+; *** SetupLdr messages
+SetupLdrStartupMessage=现在将安装 %1。您想要继续吗？
+LdrCannotCreateTemp=无法创建临时文件。安装程序已中止
+LdrCannotExecTemp=无法执行临时目录中的文件。安装程序已中止
+HelpTextNote=
+
+; *** Startup error messages
+LastErrorMessage=%1。%n%n错误 %2: %3
+SetupFileMissing=安装目录中缺少文件 %1。请修正这个问题或者获取程序的新副本。
+SetupFileCorrupt=安装文件已损坏。请获取程序的新副本。
+SetupFileCorruptOrWrongVer=安装文件已损坏，或是与这个安装程序的版本不兼容。请修正这个问题或获取新的程序副本。
+InvalidParameter=无效的命令行参数：%n%n%1
+SetupAlreadyRunning=安装程序已在运行。
+WindowsVersionNotSupported=此程序不支持当前计算机运行的 Windows 版本。
+WindowsServicePackRequired=此程序需要 %1 服务包 %2 或更高版本。
+NotOnThisPlatform=此程序不能在 %1 上运行。
+OnlyOnThisPlatform=此程序只能在 %1 上运行。
+OnlyOnTheseArchitectures=此程序只能安装到为下列处理器架构设计的 Windows 版本中：%n%n%1
+WinVersionTooLowError=此程序需要 %1 版本 %2 或更高。
+WinVersionTooHighError=此程序不能安装于 %1 版本 %2 或更高。
+AdminPrivilegesRequired=在安装此程序时您必须以管理员身份登录。
+PowerUserPrivilegesRequired=在安装此程序时您必须以管理员身份或高级用户组身份登录。
+SetupAppRunningError=安装程序检测到 %1 当前正在运行。%n%n请先关闭正在运行的程序，然后点击“确定”继续，或点击“取消”退出。
+UninstallAppRunningError=卸载程序检测到 %1 当前正在运行。%n%n请先关闭正在运行的程序，然后点击“确定”继续，或点击“取消”退出。
+
+; *** Startup questions
+PrivilegesRequiredOverrideTitle=选择安装程序安装模式
+PrivilegesRequiredOverrideInstruction=选择安装模式
+PrivilegesRequiredOverrideText1=%1 可以为所有用户安装（需要管理员权限），或仅为您安装。
+PrivilegesRequiredOverrideText2=%1 可以仅为您安装，或为所有用户安装（需要管理员权限）。
+PrivilegesRequiredOverrideAllUsers=为所有用户安装(&A)
+PrivilegesRequiredOverrideAllUsersRecommended=为所有用户安装(&A)（推荐）
+PrivilegesRequiredOverrideCurrentUser=仅为我安装(&M)
+PrivilegesRequiredOverrideCurrentUserRecommended=仅为我安装(&M)（推荐）
+
+; *** Misc. errors
+ErrorCreatingDir=安装程序无法创建目录“%1”
+ErrorTooManyFilesInDir=无法在目录“%1”中创建文件，因为里面包含太多文件
+
+; *** Setup common messages
+ExitSetupTitle=退出安装程序
+ExitSetupMessage=安装程序尚未完成。如果现在退出，将不会安装该程序。%n%n您之后可以再次运行安装程序完成安装。%n%n现在退出安装程序吗？
+AboutSetupMenuItem=关于安装程序(&A)...
+AboutSetupTitle=关于安装程序
+AboutSetupMessage=%1 版本 %2%n%3%n%n%1 主页：%n%4
+AboutSetupNote=
+TranslatorNote=简体中文翻译由 Kira（847320916@qq.com）维护。项目地址：https://github.com/kira-96/Inno-Setup-Chinese-Simplified-Translation
+
+; *** Buttons
+ButtonBack=< 上一步(&B)
+ButtonNext=下一步(&N) >
+ButtonInstall=安装(&I)
+ButtonOK=确定
+ButtonCancel=取消
+ButtonYes=是(&Y)
+ButtonYesToAll=全是(&A)
+ButtonNo=否(&N)
+ButtonNoToAll=全否(&O)
+ButtonFinish=完成(&F)
+ButtonBrowse=浏览(&B)...
+ButtonWizardBrowse=浏览(&R)...
+ButtonNewFolder=新建文件夹(&M)
+
+; *** "Select Language" dialog messages
+SelectLanguageTitle=选择安装语言
+SelectLanguageLabel=选择安装时使用的语言。
+
+; *** Common wizard text
+ClickNext=点击“下一步”继续，或点击“取消”退出安装程序。
+BeveledLabel=
+BrowseDialogTitle=浏览文件夹
+BrowseDialogLabel=在下面的列表中选择一个文件夹，然后点击“确定”。
+NewFolderName=新建文件夹
+
+; *** "Welcome" wizard page
+WelcomeLabel1=欢迎使用 [name] 安装向导
+WelcomeLabel2=即将在您的计算机上安装 [name/ver]。%n%n建议您在继续安装前关闭所有其他应用程序。
+
+; *** "Password" wizard page
+WizardPassword=密码
+PasswordLabel1=此安装程序需要密码验证。
+PasswordLabel3=请输入密码，然后点击“下一步”继续。密码区分大小写。
+PasswordEditLabel=密码(&P)：
+IncorrectPassword=您输入的密码不正确，请重新输入。
+
+; *** "License Agreement" wizard page
+WizardLicense=许可协议
+LicenseLabel=请在继续安装前阅读以下重要信息。
+LicenseLabel3=请阅读下列许可协议。在继续安装前您必须同意这些协议条款。
+LicenseAccepted=我同意此协议(&A)
+LicenseNotAccepted=我不同意此协议(&D)
+
+; *** "Information" wizard pages
+WizardInfoBefore=信息
+InfoBeforeLabel=请在继续安装前阅读以下重要信息。
+InfoBeforeClickLabel=准备好继续安装后，点击“下一步”。
+WizardInfoAfter=信息
+InfoAfterLabel=请在继续安装前阅读以下重要信息。
+InfoAfterClickLabel=准备好继续安装后，点击“下一步”。
+
+; *** "User Information" wizard page
+WizardUserInfo=用户信息
+UserInfoDesc=请输入您的信息。
+UserInfoName=用户名(&U)：
+UserInfoOrg=组织(&O)：
+UserInfoSerial=序列号(&S)：
+UserInfoNameRequired=请输入用户名。
+
+; *** "Select Destination Location" wizard page
+WizardSelectDir=选择目标位置
+SelectDirDesc=您想将 [name] 安装在哪里？
+SelectDirLabel3=安装程序将安装 [name] 到下面的文件夹中。
+SelectDirBrowseLabel=点击“下一步”继续。如果您想选择其他文件夹，点击“浏览”。
+DiskSpaceGBLabel=至少需要有 [gb] GB 的可用磁盘空间。
+DiskSpaceMBLabel=至少需要有 [mb] MB 的可用磁盘空间。
+CannotInstallToNetworkDrive=安装程序无法安装到一个网络驱动器。
+CannotInstallToUNCPath=安装程序无法安装到一个 UNC 路径。
+InvalidPath=您必须输入一个带驱动器盘符的完整路径，例如：%n%nC:\App%n%n或UNC路径：%n%n\\server\share
+InvalidDrive=您选定的驱动器或 UNC 共享不存在或不能访问。请选择其他位置。
+DiskSpaceWarningTitle=磁盘空间不足
+DiskSpaceWarning=安装程序至少需要 %1 KB 的可用空间才能安装，但选定驱动器只有 %2 KB 的可用空间。%n%n您确定要继续吗？
+DirNameTooLong=文件夹名称或路径太长。
+InvalidDirName=文件夹名称无效。
+BadDirName32=文件夹名称不能包含下列任何字符：%n%n%1
+DirExistsTitle=文件夹已存在
+DirExists=文件夹：%n%n%1%n%n已经存在。您确定安装到这个文件夹中吗？
+DirDoesntExistTitle=文件夹不存在
+DirDoesntExist=文件夹：%n%n%1%n%n不存在。您想要创建此文件夹吗？
+
+; *** "Select Components" wizard page
+WizardSelectComponents=选择组件
+SelectComponentsDesc=您想安装哪些程序组件？
+SelectComponentsLabel2=选中您想安装的组件；取消您不想安装的组件。然后点击“下一步”继续。
+FullInstallation=完全安装
+; if possible don't translate 'Compact' as 'Minimal' (I mean 'Minimal' in your language)
+CompactInstallation=简洁安装
+CustomInstallation=自定义安装
+NoUninstallWarningTitle=组件已存在
+NoUninstallWarning=安装程序检测到下列组件已安装在您的计算机中：%n%n%1%n%n取消选中这些组件不会卸载它们。%n%n您确定要继续吗？
+ComponentSize1=%1 KB
+ComponentSize2=%1 MB
+ComponentsDiskSpaceGBLabel=当前选择的组件需要至少 [gb] GB 的磁盘空间。
+ComponentsDiskSpaceMBLabel=当前选择的组件需要至少 [mb] MB 的磁盘空间。
+
+; *** "Select Additional Tasks" wizard page
+WizardSelectTasks=选择附加任务
+SelectTasksDesc=您想要安装程序执行哪些附加任务？
+SelectTasksLabel2=选择您想要安装程序在安装 [name] 时执行的附加任务，然后点击“下一步”。
+
+; *** "Select Start Menu Folder" wizard page
+WizardSelectProgramGroup=选择开始菜单文件夹
+SelectStartMenuFolderDesc=安装程序应该在哪里放置程序的快捷方式？
+SelectStartMenuFolderLabel3=安装程序将在下列“开始”菜单文件夹中创建程序的快捷方式。
+SelectStartMenuFolderBrowseLabel=点击“下一步”继续。如果您想选择其他文件夹，点击“浏览”。
+MustEnterGroupName=您必须输入一个文件夹名称。
+GroupNameTooLong=文件夹名称或路径太长。
+InvalidGroupName=文件夹名称无效。
+BadGroupName=文件夹名称不能包含下列任何字符：%n%n%1
+NoProgramGroupCheck2=不创建开始菜单文件夹(&D)
+
+; *** "Ready to Install" wizard page
+WizardReady=准备安装
+ReadyLabel1=安装程序准备就绪，现在可以开始安装 [name] 到您的计算机。
+ReadyLabel2a=点击“安装”继续此安装程序。如果您想重新查看或修改任何设置，点击“上一步”。
+ReadyLabel2b=点击“安装”继续此安装程序。
+ReadyMemoUserInfo=用户信息：
+ReadyMemoDir=目标位置：
+ReadyMemoType=安装类型：
+ReadyMemoComponents=已选择组件：
+ReadyMemoGroup=开始菜单文件夹：
+ReadyMemoTasks=附加任务：
+
+; *** TDownloadWizardPage wizard page and DownloadTemporaryFile
+DownloadingLabel2=正在下载文件...
+ButtonStopDownload=停止下载(&S)
+StopDownload=您确定要停止下载吗？
+ErrorDownloadAborted=下载已中止
+ErrorDownloadFailed=下载失败：%1 %2
+ErrorDownloadSizeFailed=获取大小失败：%1 %2
+ErrorProgress=无效的进度：%1 / %2
+ErrorFileSize=文件大小错误：预期 %1，实际 %2
+
+; *** TExtractionWizardPage wizard page and ExtractArchive
+ExtractingLabel=正在提取文件...
+ButtonStopExtraction=停止提取(&S)
+StopExtraction=您确定要停止提取吗？
+ErrorExtractionAborted=提取已中止
+ErrorExtractionFailed=提取失败：%1
+
+; *** Archive extraction failure details
+ArchiveIncorrectPassword=密码不正确
+ArchiveIsCorrupted=压缩包已损坏
+ArchiveUnsupportedFormat=不支持的压缩包格式
+
+; *** "Preparing to Install" wizard page
+WizardPreparing=正在准备安装
+PreparingDesc=安装程序正在准备安装 [name] 到您的计算机。
+PreviousInstallNotCompleted=先前的程序安装或卸载未完成，需要您重启计算机以完成该安装。%n%n在重启计算机后，再次运行安装程序以完成 [name] 的安装。
+CannotContinue=安装程序不能继续。请点击“取消”退出。
+ApplicationsFound=以下应用程序正在使用将由安装程序更新的文件。建议您允许安装程序自动关闭这些应用程序。
+ApplicationsFound2=以下应用程序正在使用将由安装程序更新的文件。建议您允许安装程序自动关闭这些应用程序。安装完成后，安装程序将尝试重新启动这些应用程序。
+CloseApplications=自动关闭应用程序(&A)
+DontCloseApplications=不要关闭应用程序(&D)
+ErrorCloseApplications=安装程序无法自动关闭所有应用程序。建议您在继续之前，关闭所有在使用需要由安装程序更新的文件的应用程序。
+PrepareToInstallNeedsRestart=安装程序必须重启您的计算机。计算机重启后，请再次运行安装程序以完成 [name] 的安装。%n%n要立即重启吗？
+
+; *** "Installing" wizard page
+WizardInstalling=正在安装
+InstallingLabel=安装程序正在安装 [name] 到您的计算机，请稍候。
+
+; *** "Setup Completed" wizard page
+FinishedHeadingLabel=完成 [name] 安装向导
+FinishedLabelNoIcons=安装程序已在您的计算机中安装了 [name]。
+FinishedLabel=安装程序已在您的计算机中安装了 [name]。您可以通过已安装的快捷方式运行此应用程序。
+ClickFinish=点击“完成”退出安装程序。
+FinishedRestartLabel=为完成 [name] 的安装，安装程序必须重新启动您的计算机。要立即重启吗？
+FinishedRestartMessage=为完成 [name] 的安装，安装程序必须重新启动您的计算机。%n%n要立即重启吗？
+ShowReadmeCheck=是，我想查阅自述文件
+YesRadio=是，立即重启计算机(&Y)
+NoRadio=否，稍后重启计算机(&N)
+; used for example as 'Run MyProg.exe'
+RunEntryExec=运行 %1
+; used for example as 'View Readme.txt'
+RunEntryShellExec=查阅 %1
+
+; *** "Setup Needs the Next Disk" stuff
+ChangeDiskTitle=安装程序需要下一张磁盘
+SelectDiskLabel2=请插入磁盘 %1 并点击“确定”。%n%n如果这个磁盘中的文件可以在下列文件夹之外的文件夹中找到，请输入正确的路径或点击“浏览”。
+PathLabel=路径(&P)：
+FileNotInDir2=“%2”中找不到文件“%1”。请插入正确的磁盘或选择其他文件夹。
+SelectDirectoryLabel=请指定下一张磁盘的位置。
+
+; *** Installation phase messages
+SetupAborted=安装程序未完成安装。%n%n请修正这个问题并重新运行安装程序。
+AbortRetryIgnoreSelectAction=选择操作
+AbortRetryIgnoreRetry=重试(&T)
+AbortRetryIgnoreIgnore=忽略错误并继续(&I)
+AbortRetryIgnoreCancel=取消安装
+RetryCancelSelectAction=选择操作
+RetryCancelRetry=重试(&T)
+RetryCancelCancel=取消
+
+; *** Installation status messages
+StatusClosingApplications=正在关闭应用程序...
+StatusCreateDirs=正在创建目录...
+StatusExtractFiles=正在提取文件...
+StatusDownloadFiles=正在下载文件...
+StatusCreateIcons=正在创建快捷方式...
+StatusCreateIniEntries=正在创建 INI 条目...
+StatusCreateRegistryEntries=正在创建注册表条目...
+StatusRegisterFiles=正在注册文件...
+StatusSavingUninstall=正在保存卸载信息...
+StatusRunProgram=正在完成安装...
+StatusRestartingApplications=正在重启应用程序...
+StatusRollback=正在撤销更改...
+
+; *** Misc. errors
+ErrorInternal2=内部错误：%1
+ErrorFunctionFailedNoCode=%1 失败
+ErrorFunctionFailed=%1 失败；错误代码 %2
+ErrorFunctionFailedWithMessage=%1 失败；错误代码 %2.%n%3
+ErrorExecutingProgram=无法执行文件：%n%1
+
+; *** Registry errors
+ErrorRegOpenKey=打开注册表项时出错：%n%1\%2
+ErrorRegCreateKey=创建注册表项时出错：%n%1\%2
+ErrorRegWriteKey=写入注册表项时出错：%n%1\%2
+
+; *** INI errors
+ErrorIniEntry=在文件“%1”中创建 INI 条目时出错。
+
+; *** File copying errors
+FileAbortRetryIgnoreSkipNotRecommended=跳过此文件(&S)（不推荐）
+FileAbortRetryIgnoreIgnoreNotRecommended=忽略错误并继续(&I)（不推荐）
+SourceIsCorrupted=源文件已损坏
+SourceDoesntExist=源文件“%1”不存在
+SourceVerificationFailed=源文件验证失败：%1
+VerificationSignatureDoesntExist=签名文件“%1”不存在
+VerificationSignatureInvalid=签名文件“%1”无效
+VerificationKeyNotFound=签名文件“%1”使用了未知的密钥
+VerificationFileNameIncorrect=文件名不正确
+VerificationFileTagIncorrect=文件标签不正确
+VerificationFileSizeIncorrect=文件大小不正确
+VerificationFileHashIncorrect=文件哈希值不正确
+ExistingFileReadOnly2=无法替换已存在的文件，它是只读的。
+ExistingFileReadOnlyRetry=移除只读属性并重试(&R)
+ExistingFileReadOnlyKeepExisting=保留已存在的文件(&K)
+ErrorReadingExistingDest=尝试读取已存在的文件时出错：
+FileExistsSelectAction=选择操作
+FileExists2=文件已经存在。
+FileExistsOverwriteExisting=覆盖已存在的文件(&O)
+FileExistsKeepExisting=保留已存在的文件(&K)
+FileExistsOverwriteOrKeepAll=为接下来的冲突文件执行此操作(&D)
+ExistingFileNewerSelectAction=选择操作
+ExistingFileNewer2=已存在的文件比安装程序将要安装的文件还要新。
+ExistingFileNewerOverwriteExisting=覆盖已存在的文件(&O)
+ExistingFileNewerKeepExisting=保留已存在的文件(&K)（推荐）
+ExistingFileNewerOverwriteOrKeepAll=为接下来的冲突文件执行此操作(&D)
+ErrorChangingAttr=尝试更改下列已存在的文件属性时出错：
+ErrorCreatingTemp=尝试在目标目录创建文件时出错：
+ErrorReadingSource=尝试读取下列源文件时出错：
+ErrorCopying=尝试复制下列文件时出错：
+ErrorDownloading=尝试下载文件时出错：
+ErrorExtracting=尝试提取压缩包时出错：
+ErrorReplacingExistingFile=尝试替换已存在的文件时出错：
+ErrorRestartReplace=重启并替换失败：
+ErrorRenamingTemp=尝试重命名下列目标目录中的一个文件时出错：
+ErrorRegisterServer=无法注册 DLL/OCX：%1
+ErrorRegSvr32Failed=RegSvr32 失败；退出代码 %1
+ErrorRegisterTypeLib=无法注册类型库：%1
+
+; *** Uninstall display name markings
+; used for example as 'My Program (32-bit)'
+UninstallDisplayNameMark=%1 (%2)
+; used for example as 'My Program (32-bit, All users)'
+UninstallDisplayNameMarks=%1 (%2, %3)
+UninstallDisplayNameMark32Bit=32 位
+UninstallDisplayNameMark64Bit=64 位
+UninstallDisplayNameMarkAllUsers=所有用户
+UninstallDisplayNameMarkCurrentUser=当前用户
+
+; *** Post-installation errors
+ErrorOpeningReadme=尝试打开自述文件时出错。
+ErrorRestartingComputer=安装程序无法重启计算机，请手动重启。
+
+; *** Uninstaller messages
+UninstallNotFound=文件“%1”不存在。无法卸载。
+UninstallOpenError=文件“%1”不能被打开。无法卸载
+UninstallUnsupportedVer=此版本的卸载程序无法识别卸载日志文件“%1”的格式。无法卸载
+UninstallUnknownEntry=卸载日志中遇到一个未知条目（%1）
+ConfirmUninstall=您确认要完全移除 %1 及其所有组件吗？
+UninstallOnlyOnWin64=仅允许在 64 位 Windows 中卸载此程序。
+OnlyAdminCanUninstall=仅使用管理员权限的用户能完成此卸载。
+UninstallStatusLabel=正在从您的计算机中移除 %1，请稍候。
+UninstalledAll=已顺利从您的计算机中移除 %1。
+UninstalledMost=%1 卸载完成。%n%n有部分内容未能被删除，但您可以手动删除它们。
+UninstalledAndNeedsRestart=为完成 %1 的卸载，需要重启您的计算机。%n%n要立即重启吗？
+UninstallDataCorrupted=文件“%1”已损坏。无法卸载
+
+; *** Uninstallation phase messages
+ConfirmDeleteSharedFileTitle=删除共享文件？
+ConfirmDeleteSharedFile2=系统表示下列共享文件已不再有任何程序使用。您希望卸载程序删除此共享文件吗？%n%n如果仍有程序正在使用此文件，删除后这些程序可能无法正常运行。如果您不能确定，请选择“否”，保留此文件在系统中不会造成任何损害。
+SharedFileNameLabel=文件名：
+SharedFileLocationLabel=位置：
+WizardUninstalling=卸载状态
+StatusUninstalling=正在卸载 %1...
+
+; *** Shutdown block reasons
+ShutdownBlockReasonInstallingApp=正在安装 %1。
+ShutdownBlockReasonUninstallingApp=正在卸载 %1。
+
+; The custom messages below aren't used by Setup itself, but if you make
+; use of them in your scripts, you'll want to translate them.
+
+[CustomMessages]
+
+NameAndVersion=%1 版本 %2
+AdditionalIcons=附加快捷方式：
+CreateDesktopIcon=创建桌面快捷方式(&D)
+CreateQuickLaunchIcon=创建快速启动栏快捷方式(&Q)
+ProgramOnTheWeb=%1 网站
+UninstallProgram=卸载 %1
+LaunchProgram=运行 %1
+AssocFileExtension=将 %2 文件扩展名与 %1 建立关联(&A)
+AssocingFileExtension=正在将 %2 文件扩展名与 %1 建立关联...
+AutoStartProgramGroupDescription=启动：
+AutoStartProgram=自动启动 %1
+AddonHostProgramNotFound=您选择的文件夹中无法找到 %1。%n%n您确定要继续吗？
@@ -0,0 +1,145 @@
+; LMVPN Windows Installer — Inno Setup script
+;
+; Build:
+;   ISCC /DAppVersion=0.3.6-abc123 installer/lmvpn.iss
+;   wine "C:\Program Files (x86)\Inno Setup 6\ISCC.exe" /DAppVersion=0.3.6-abc123 installer/lmvpn.iss
+;
+; The exes (lmvpn.exe, lmvpnd.exe) must exist in ../build/ before compiling.
+; Run `make build-windows` first (or `make installer-windows` which does both).
+
+#ifndef AppVersion
+  #define AppVersion "dev"
+#endif
+
+#define AppName       "LMVPN"
+#define AppPublisher  "LMVPN"
+#define AppExeName    "lmvpn.exe"
+#define DaemonExeName "lmvpnd.exe"
+#define AppURL        "https://github.com/lmvpn/lmvpn_client"
+
+[Setup]
+AppId={{8F7B3A2E-1D4C-4B5E-9F6A-2E3C7D8E1F0A}
+AppName={#AppName}
+AppVersion={#AppVersion}
+AppVerName={#AppName} {#AppVersion}
+AppPublisher={#AppPublisher}
+AppPublisherURL={#AppURL}
+AppSupportURL={#AppURL}
+AppUpdatesURL={#AppURL}
+DefaultDirName={autopf}\{#AppName}
+DefaultGroupName={#AppName}
+DisableProgramGroupPage=yes
+PrivilegesRequired=admin
+ArchitecturesAllowed=x64compatible
+ArchitecturesInstallIn64BitMode=x64compatible
+Compression=lzma2
+SolidCompression=yes
+WizardStyle=modern
+OutputDir=..\build
+OutputBaseFilename=LMVPN-Setup-{#AppVersion}
+SetupIconFile=..\resources\icon.ico
+UninstallDisplayIcon={app}\{#AppExeName}
+UninstallDisplayName={#AppName}
+
+[Languages]
+Name: "chinesesimp"; MessagesFile: "ChineseSimplified.isl"
+Name: "english";    MessagesFile: "compiler:Default.isl"
+
+[Tasks]
+Name: "desktopicon"; Description: "创建桌面快捷方式(&D)"; GroupDescription: "附加选项:"; Flags: unchecked
+
+[Files]
+Source: "..\build\{#AppExeName}";     DestDir: "{app}"; Flags: ignoreversion
+Source: "..\build\{#DaemonExeName}";  DestDir: "{app}"; Flags: ignoreversion
+Source: "..\resources\wintun.dll";    DestDir: "{app}"; Flags: ignoreversion
+
+[Icons]
+Name: "{group}\{#AppName}";           Filename: "{app}\{#AppExeName}"
+Name: "{group}\卸载 {#AppName}";       Filename: "{uninstallexe}"
+Name: "{commondesktop}\{#AppName}";   Filename: "{app}\{#AppExeName}"; Tasks: desktopicon
+
+[Run]
+Filename: "{app}\{#AppExeName}"; Description: "立即启动 {#AppName}"; Flags: nowait postinstall skipifsilent
+
+[UninstallDelete]
+Type: files; Name: "{app}\wintun.dll"
+
+[Code]
+
+// Kill running LMVPN processes (GUI + daemon) by image name.
+// Returns True if at least one process was found and killed.
+function KillProcess(const ExeName: String): Boolean;
+var
+  ResultCode: Integer;
+begin
+  Result := False;
+  // taskkill /IM <name> /F /T — force-kill process tree
+  if Exec(ExpandConstant('{cmd}'), '/C taskkill /IM ' + ExeName + ' /F /T',
+          '', SW_HIDE, ewWaitUntilTerminated, ResultCode) then
+  begin
+    // exit code 0 = killed, 128 = not found — both are fine
+    Result := (ResultCode = 0);
+  end;
+end;
+
+// PrepareToInstall runs before file extraction. We kill any running
+// LMVPN processes here so that the exes can be overwritten cleanly.
+function PrepareToInstall(var NeedsRestart: Boolean): String;
+begin
+  KillProcess('{#DaemonExeName}');
+  KillProcess('{#AppExeName}');
+  // Give the OS a moment to release file handles
+  Sleep(800);
+  Result := '';
+end;
+
+// Kill processes before uninstall as well.
+procedure CurUninstallStepChanged(CurUninstallStep: TUninstallStep);
+begin
+  if CurUninstallStep = usUninstall then
+  begin
+    KillProcess('{#DaemonExeName}');
+    KillProcess('{#AppExeName}');
+    Sleep(500);
+  end;
+end;
+
+// Check if a process with the given image name is currently running.
+function IsProcessRunning(const ExeName: String): Boolean;
+var
+  ResultCode: Integer;
+begin
+  Result := False;
+  // tasklist exits 0 if the process is found, 1 if not found
+  if Exec(ExpandConstant('{cmd}'), '/C tasklist /FI "IMAGENAME eq ' + ExeName + '" /NH /FO CSV | findstr /I "' + ExeName + '"',
+          '', SW_HIDE, ewWaitUntilTerminated, ResultCode) then
+    Result := (ResultCode = 0);
+end;
+
+// Warn the user if LMVPN is still running and offer to kill it
+// before proceeding from the directory selection page.
+function NextButtonClick(CurPageID: Integer): Boolean;
+begin
+  Result := True;
+  if CurPageID = wpSelectDir then
+  begin
+    if IsProcessRunning('{#AppExeName}') or IsProcessRunning('{#DaemonExeName}') then
+    begin
+      if MsgBox('{#AppName} 正在运行中，需要先关闭才能继续安装。' + #13#10 + #13#10 + '是否立即关闭？',
+                mbConfirmation, MB_YESNO) = IDYES then
+      begin
+        KillProcess('{#DaemonExeName}');
+        KillProcess('{#AppExeName}');
+        Sleep(800);
+        // Verify they're actually dead
+        if IsProcessRunning('{#AppExeName}') or IsProcessRunning('{#DaemonExeName}') then
+        begin
+          MsgBox('无法关闭 {#AppName} 进程，请手动结束任务后重试。', mbError, MB_OK);
+          Result := False;
+        end;
+      end
+      else
+        Result := False;
+    end;
+  end;
+end;
@@ -6,6 +6,7 @@ package auth

 import (
 	"bytes"
+	"crypto/tls"
 	"encoding/json"
 	"fmt"
 	"io"
@@ -41,7 +42,12 @@ type errorResponse struct {
 // baseURL should be the HTTP(S) origin derived from the WebSocket URL
 // (e.g. "http://localhost:8080" for ws://, "https://vpn.example.com"
 // for wss://). See WSURLToHTTP.
-func Login(baseURL, username, password string) (*LoginResult, error) {
+//
+// tlsCfg, if non-nil, is used as the TLS configuration for the HTTP
+// client. This is essential when connecting via CDN edge IPs: the URL
+// host will be an IP address, but the certificate must be verified
+// against the real hostname (set tlsCfg.ServerName).
+func Login(baseURL, username, password string, tlsCfg *tls.Config) (*LoginResult, error) {
 	body, err := json.Marshal(loginRequest{Username: username, Password: password})
 	if err != nil {
 		return nil, err
@@ -49,6 +55,9 @@ func Login(baseURL, username, password string) (*LoginResult, error) {

 	url := strings.TrimRight(baseURL, "/") + "/api/login"
 	client := &http.Client{Timeout: 15 * time.Second}
+	if tlsCfg != nil {
+		client.Transport = &http.Transport{TLSClientConfig: tlsCfg}
+	}
 	resp, err := client.Post(url, "application/json", bytes.NewReader(body))
 	if err != nil {
 		return nil, fmt.Errorf("login request: %w", err)
@@ -19,6 +19,7 @@ import (
 	"net"
 	"os"
 	"os/signal"
+	"sync"
 	"syscall"

 	"lmvpn/internal/ipc"
@@ -26,6 +27,7 @@ import (
 	"lmvpn/internal/model"
 	"lmvpn/internal/paths"
 	"lmvpn/internal/stats"
+	"lmvpn/internal/version"
 	"lmvpn/internal/vpn"
 )

@@ -59,8 +61,8 @@ func Run(userHome string, uid, gid int) error {
 	// Chown the IPC socket so the non-root GUI process can connect.
 	// This is the critical fix: without it, the socket is owned by
 	// root:wheel with mode 0660, and the user cannot dial it.
-	chownToUser(paths.IPCSocketPath(), uid, gid)
-	log.L().Info("daemon listening", "socket", paths.IPCSocketPath())
+	chownToUser(paths.IPCAddress(), uid, gid)
+	log.L().Info("daemon listening", "socket", paths.IPCAddress())

 	d := &daemon{server: server}

@@ -91,6 +93,7 @@ func chownToUser(path string, uid, gid int) {

 type daemon struct {
 	server  *ipc.Server
+	mu      sync.Mutex
 	session *vpn.SessionManager
 	cancel  context.CancelFunc
 }
@@ -108,36 +111,47 @@ func (d *daemon) handle(conn net.Conn, req ipc.Request) {
 		d.server.Close()
 		os.Exit(0)
 	case ipc.CmdStats:
-		if d.session != nil {
-			snap := d.session.Stats().Snapshot()
+		d.mu.Lock()
+		sess := d.session
+		d.mu.Unlock()
+		if sess != nil {
+			snap := sess.Stats().Snapshot()
 			d.server.Broadcast(ipc.Event{Event: ipc.EvStats, Stats: &snap})
 		}
 		_ = ipc.WriteOK(conn)
+	case ipc.CmdVersion:
+		_ = ipc.WriteVersion(conn, version.Version)
 	default:
 		_ = ipc.WriteErr(conn, "unknown command: "+req.Cmd)
 	}
 }

 func (d *daemon) startSession(conn net.Conn, req ipc.Request) {
+	d.mu.Lock()
+	defer d.mu.Unlock()
 	if req.Config == nil {
 		_ = ipc.WriteErr(conn, "missing config")
 		return
 	}
 	if d.session != nil {
-		d.stopSession()
+		d.stopSessionLocked()
 	}

 	cfg := vpn.SessionConfig{
-		ServerURL:   req.Config.ServerURL,
-		SNIHost:     req.Config.SNIHost,
-		ServerIPs:   req.Config.ServerIPs,
-		Username:    req.Config.Username,
-		Password:    req.Config.Password,
-		Token:       req.Config.Token,
-		AuthMode:    model.AuthMode(req.Config.AuthMode),
-		RoutingMode: ipc.RoutingModeFromIPC(req.Config.RoutingMode),
-		CustomCIDRs: req.Config.CustomCIDRs,
-		MTUOverride: req.Config.MTUOverride,
+		ServerURL:     req.Config.ServerURL,
+		SNIHost:       req.Config.SNIHost,
+		ServerIPs:     req.Config.ServerIPs,
+		Username:      req.Config.Username,
+		Password:      req.Config.Password,
+		Token:         req.Config.Token,
+		AuthMode:      model.AuthMode(req.Config.AuthMode),
+		RoutingMode:   ipc.RoutingModeFromIPC(req.Config.RoutingMode),
+		CustomCIDRs:   req.Config.CustomCIDRs,
+		MTUOverride:   req.Config.MTUOverride,
+		TLSCACert:     req.Config.TLSCACert,
+		TLSCAPath:     req.Config.TLSCAPath,
+		TLSInsecure:   req.Config.TLSInsecure,
+		TLSPinnedHash: req.Config.TLSPinnedHash,
 	}

 	ctx, cancel := context.WithCancel(context.Background())
@@ -150,6 +164,9 @@ func (d *daemon) startSession(conn net.Conn, req ipc.Request) {
 			s := snap
 			d.server.Broadcast(ipc.Event{Event: ipc.EvStats, Stats: &s})
 		},
+		func(code string, msg string) {
+			d.server.Broadcast(ipc.Event{Event: ipc.EvError, Code: code, Message: msg})
+		},
 	)

 	if err := d.session.Connect(ctx, cfg); err != nil {
@@ -160,6 +177,12 @@ func (d *daemon) startSession(conn net.Conn, req ipc.Request) {
 }

 func (d *daemon) stopSession() {
+	d.mu.Lock()
+	defer d.mu.Unlock()
+	d.stopSessionLocked()
+}
+
+func (d *daemon) stopSessionLocked() {
 	if d.cancel != nil {
 		d.cancel()
 		d.cancel = nil
@@ -0,0 +1,5 @@
+//go:build !windows
+
+package daemon
+
+const daemonBinaryName = "lmvpnd"
@@ -0,0 +1,5 @@
+//go:build windows
+
+package daemon
+
+const daemonBinaryName = "lmvpnd.exe"
@@ -0,0 +1,32 @@
+package daemon
+
+import (
+	"fmt"
+	"os"
+	"path/filepath"
+)
+
+// resolveDaemonBinary locates the lmvpnd binary relative to the
+// launcher's executable path. In a .app bundle, lmvpnd lives in the
+// same Contents/MacOS/ directory as lmvpn. In development, it lives
+// in the same build directory.
+func resolveDaemonBinary() (string, error) {
+	exe, err := os.Executable()
+	if err != nil {
+		return "", fmt.Errorf("resolve launcher executable: %w", err)
+	}
+
+	// Resolve any symlinks.
+	exe, err = filepath.EvalSymlinks(exe)
+	if err != nil {
+		return "", fmt.Errorf("resolve symlink: %w", err)
+	}
+
+	dir := filepath.Dir(exe)
+	candidate := filepath.Join(dir, daemonBinaryName)
+	if _, err := os.Stat(candidate); err == nil {
+		return candidate, nil
+	}
+
+	return "", fmt.Errorf("could not find %s near %s", daemonBinaryName, exe)
+}
@@ -1,3 +1,5 @@
+//go:build !windows
+
 package daemon

 import (
@@ -120,33 +122,4 @@ func Launch(userHome string, uid, gid int, daemonBin string) error {
 	return nil
 }

-// resolveDaemonBinary locates the lmvpnd binary relative to the
-// launcher's executable path. In a .app bundle, lmvpnd lives in the
-// same Contents/MacOS/ directory as lmvpn. In development, it lives
-// in the same build directory.
-func resolveDaemonBinary() (string, error) {
-	exe, err := os.Executable()
-	if err != nil {
-		return "", fmt.Errorf("resolve launcher executable: %w", err)
-	}
-
-	// Resolve any symlinks.
-	exe, err = filepath.EvalSymlinks(exe)
-	if err != nil {
-		return "", fmt.Errorf("resolve symlink: %w", err)
-	}
-
-	dir := filepath.Dir(exe)
-	candidates := []string{
-		filepath.Join(dir, "lmvpnd"),
-		filepath.Join(dir, "lmvpn-daemon"),
-	}
-
-	for _, c := range candidates {
-		if _, err := os.Stat(c); err == nil {
-			return c, nil
-		}
-	}
-
-	return "", fmt.Errorf("could not find lmvpnd binary near %s (tried %v)", exe, candidates)
-}
+// resolveDaemonBinary is in launch_common.go.
@@ -0,0 +1,93 @@
+//go:build windows
+
+package daemon
+
+import (
+	"fmt"
+	"os"
+	"path/filepath"
+	"syscall"
+
+	"lmvpn/internal/paths"
+)
+
+// Launch starts the daemon binary (lmvpnd.exe) as a detached process
+// and returns immediately. On Windows, detachment is achieved via
+// CREATE_NEW_PROCESS_GROUP | DETACHED_PROCESS creation flags instead
+// of the Unix Setsid call.
+//
+// The launcher itself is invoked by the GUI via ShellExecute "runas"
+// (UAC elevation). It:
+//  1. Computes the daemon log path using the user's home directory
+//  2. Opens the log file (append) and NUL
+//  3. Starts the lmvpnd.exe binary, redirecting stdio
+//  4. Returns immediately — the child continues running independently
+func Launch(userHome string, uid, gid int, daemonBin string) error {
+	paths.SetUserHome(userHome)
+	if err := paths.EnsureDirs(); err != nil {
+		fmt.Fprintf(os.Stderr, "ensure dirs: %v\n", err)
+	}
+
+	if daemonBin == "" {
+		var err error
+		daemonBin, err = resolveDaemonBinary()
+		if err != nil {
+			return err
+		}
+	}
+
+	absBin, err := filepath.Abs(daemonBin)
+	if err != nil {
+		return fmt.Errorf("resolve absolute path for %s: %w", daemonBin, err)
+	}
+	daemonBin = absBin
+
+	if _, err := os.Stat(daemonBin); err != nil {
+		return fmt.Errorf("daemon binary not found at %s: %w", daemonBin, err)
+	}
+
+	logPath := paths.DaemonLogFile()
+	logFile, err := os.OpenFile(logPath, os.O_CREATE|os.O_WRONLY|os.O_APPEND, 0o644)
+	if err != nil {
+		return fmt.Errorf("open daemon log %s: %w", logPath, err)
+	}
+
+	devNull, err := os.Open(os.DevNull)
+	if err != nil {
+		logFile.Close()
+		return fmt.Errorf("open NUL: %w", err)
+	}
+
+	args := []string{
+		"--user-home", userHome,
+		"--uid", fmt.Sprintf("%d", uid),
+		"--gid", fmt.Sprintf("%d", gid),
+	}
+
+	fmt.Fprintf(logFile, "=== launcher: starting daemon %s %v ===\n", daemonBin, args)
+
+	// CREATE_NEW_PROCESS_GROUP (0x200) | DETACHED_PROCESS (0x8)
+	procAttr := &os.ProcAttr{
+		Dir: os.TempDir(),
+		Env: append(os.Environ(),
+			"LMVPN_DAEMON=1",
+		),
+		Files: []*os.File{devNull, logFile, logFile},
+		Sys: &syscall.SysProcAttr{
+			CreationFlags: 0x00000200 | 0x00000008,
+		},
+	}
+
+	pid, err := os.StartProcess(daemonBin, append([]string{daemonBin}, args...), procAttr)
+	logFile.Close()
+	devNull.Close()
+
+	if err != nil {
+		return fmt.Errorf("start daemon process: %w", err)
+	}
+
+	_ = pid.Release()
+
+	fmt.Fprintf(os.Stderr, "daemon launched (pid %d, bin %s)\n", pid.Pid, daemonBin)
+	return nil
+}
@@ -48,7 +48,10 @@ func (s *Store) migrate() error {
 	if err := s.migrateV2(); err != nil {
 		return err
 	}
-	return s.migrateV3()
+	if err := s.migrateV3(); err != nil {
+		return err
+	}
+	return s.migrateV4()
 }

 func (s *Store) migrateV2() error {
@@ -181,6 +184,29 @@ func (s *Store) migrateV3() error {
 	return nil
 }

+// migrateV4 adds TLS certificate verification columns to
+// server_profiles for custom CA, insecure mode, and cert pinning.
+// Idempotent: skips columns that already exist.
+func (s *Store) migrateV4() error {
+	cols := []struct {
+		name string
+		sql  string
+	}{
+		{"tls_ca_cert", "ALTER TABLE server_profiles ADD COLUMN tls_ca_cert TEXT NOT NULL DEFAULT ''"},
+		{"tls_ca_path", "ALTER TABLE server_profiles ADD COLUMN tls_ca_path TEXT NOT NULL DEFAULT ''"},
+		{"tls_insecure", "ALTER TABLE server_profiles ADD COLUMN tls_insecure INTEGER NOT NULL DEFAULT 0"},
+		{"tls_pinned_hash", "ALTER TABLE server_profiles ADD COLUMN tls_pinned_hash TEXT NOT NULL DEFAULT ''"},
+	}
+	for _, c := range cols {
+		if !columnExists(s.db, "server_profiles", c.name) {
+			if _, err := s.db.Exec(c.sql); err != nil {
+				return fmt.Errorf("migrate v4 add %s: %w", c.name, err)
+			}
+		}
+	}
+	return nil
+}
+
 // columnExists reports whether a column exists on a table.
 func columnExists(db *sql.DB, table, column string) bool {
 	rows, err := db.Query(fmt.Sprintf("PRAGMA table_info(%s)", table))
@@ -14,11 +14,13 @@ func (s *Store) CreateProfile(p *model.ServerProfile) (int64, error) {
 		`INSERT INTO server_profiles
 		   (name, protocol, host, server_ips, port, path,
 		    username, auth_mode, routing_mode,
-		    custom_cidrs, mtu_override, auto_connect)
-		 VALUES (?,?,?,?,?,?,?,?,?,?,?,?)`,
+		    custom_cidrs, mtu_override, auto_connect,
+		    tls_ca_cert, tls_ca_path, tls_insecure, tls_pinned_hash)
+		 VALUES (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)`,
 		p.Name, p.Protocol, p.Host, p.ServerIPs, p.Port, p.Path,
 		p.Username, p.AuthMode, p.RoutingMode,
 		p.CustomCIDRs, p.MTUOverride, p.AutoConnect,
+		p.TLSCACert, p.TLSCAPath, p.TLSInsecure, p.TLSPinnedHash,
 	)
 	if err != nil {
 		return 0, fmt.Errorf("insert profile: %w", err)
@@ -36,11 +38,14 @@ func (s *Store) GetProfile(id int64) (*model.ServerProfile, error) {
 	err := s.db.QueryRow(
 		`SELECT id, name, protocol, host, server_ips, port, path,
 		        username, auth_mode, routing_mode,
-		        custom_cidrs, mtu_override, auto_connect, created_at, last_connected_at
+		        custom_cidrs, mtu_override, auto_connect,
+		        tls_ca_cert, tls_ca_path, tls_insecure, tls_pinned_hash,
+		        created_at, last_connected_at
 		 FROM server_profiles WHERE id = ?`, id,
 	).Scan(&p.ID, &p.Name, &p.Protocol, &p.Host, &p.ServerIPs, &p.Port, &p.Path,
 		&p.Username, &p.AuthMode, &p.RoutingMode, &p.CustomCIDRs, &p.MTUOverride,
-		&p.AutoConnect, &p.CreatedAt, &last)
+		&p.AutoConnect, &p.TLSCACert, &p.TLSCAPath, &p.TLSInsecure, &p.TLSPinnedHash,
+		&p.CreatedAt, &last)
 	if err != nil {
 		return nil, fmt.Errorf("get profile %d: %w", id, err)
 	}
@@ -55,7 +60,9 @@ func (s *Store) ListProfiles() ([]model.ServerProfile, error) {
 	rows, err := s.db.Query(
 		`SELECT id, name, protocol, host, server_ips, port, path,
 		        username, auth_mode, routing_mode,
-		        custom_cidrs, mtu_override, auto_connect, created_at, last_connected_at
+		        custom_cidrs, mtu_override, auto_connect,
+		        tls_ca_cert, tls_ca_path, tls_insecure, tls_pinned_hash,
+		        created_at, last_connected_at
 		 FROM server_profiles ORDER BY name`)
 	if err != nil {
 		return nil, fmt.Errorf("list profiles: %w", err)
@@ -68,7 +75,9 @@ func (s *Store) ListProfiles() ([]model.ServerProfile, error) {
 		var last sql.NullTime
 		if err := rows.Scan(&p.ID, &p.Name, &p.Protocol, &p.Host, &p.ServerIPs,
 			&p.Port, &p.Path, &p.Username, &p.AuthMode, &p.RoutingMode,
-			&p.CustomCIDRs, &p.MTUOverride, &p.AutoConnect, &p.CreatedAt, &last); err != nil {
+			&p.CustomCIDRs, &p.MTUOverride, &p.AutoConnect,
+			&p.TLSCACert, &p.TLSCAPath, &p.TLSInsecure, &p.TLSPinnedHash,
+			&p.CreatedAt, &last); err != nil {
 			return nil, err
 		}
 		if last.Valid {
@@ -85,11 +94,13 @@ func (s *Store) UpdateProfile(p *model.ServerProfile) error {
 		`UPDATE server_profiles SET
 		    name = ?, protocol = ?, host = ?, server_ips = ?, port = ?, path = ?,
 		    username = ?, auth_mode = ?, routing_mode = ?,
-		    custom_cidrs = ?, mtu_override = ?, auto_connect = ?
+		    custom_cidrs = ?, mtu_override = ?, auto_connect = ?,
+		    tls_ca_cert = ?, tls_ca_path = ?, tls_insecure = ?, tls_pinned_hash = ?
 		 WHERE id = ?`,
 		p.Name, p.Protocol, p.Host, p.ServerIPs, p.Port, p.Path,
 		p.Username, p.AuthMode, p.RoutingMode,
-		p.CustomCIDRs, p.MTUOverride, p.AutoConnect, p.ID)
+		p.CustomCIDRs, p.MTUOverride, p.AutoConnect,
+		p.TLSCACert, p.TLSCAPath, p.TLSInsecure, p.TLSPinnedHash, p.ID)
 	if err != nil {
 		return fmt.Errorf("update profile %d: %w", p.ID, err)
 	}
@@ -24,10 +24,18 @@ Ip6None = "IPv6: —"
 IpNone = "IP: —"
 UptimeLabel = "Uptime: {{.uptime}}"
 UptimeNone = "Uptime: —"
-RxLabel = "↓ {{.bytes}}"
-TxLabel = "↑ {{.bytes}}"
-RxZero = "↓ 0 B"
-TxZero = "↑ 0 B"
+RxV4Label = "IPv4 ↓ {{.bytes}} {{.speed}}"
+TxV4Label = "↑ {{.bytes}} {{.speed}}"
+RxV6Label = "IPv6 ↓ {{.bytes}} {{.speed}}"
+TxV6Label = "↑ {{.bytes}} {{.speed}}"
+RxTotalLabel = "Total ↓ {{.bytes}} {{.speed}}"
+TxTotalLabel = "↑ {{.bytes}} {{.speed}}"
+RxV4Zero = "IPv4 ↓ 0 B  0 bps"
+TxV4Zero = "↑ 0 B  0 bps"
+RxV6Zero = "IPv6 ↓ 0 B  0 bps"
+TxV6Zero = "↑ 0 B  0 bps"
+RxTotalZero = "Total ↓ 0 B  0 bps"
+TxTotalZero = "↑ 0 B  0 bps"

 DlgNoProfileTitle = "No Profile"
 DlgNoProfileEditMsg = "Select a profile to edit."
@@ -45,11 +53,23 @@ DlgVPNError = "VPN Error"
 DlgSaveError = "Save Error"
 DlgKeychainError = "Keychain Error"
 DlgError = "Error"
+DlgAuthError = "Authentication Failed"
+AuthErrWrongCredentials = "Wrong username or password. Please check your credentials."
+AuthErrUserDisabled = "This user account does not exist or has been disabled."
+AuthErrTokenInvalid = "The authentication token is invalid or expired."
+AuthErrRateLimited = "Too many authentication attempts. Please try again later."
+AuthErrMalformed = "Authentication message format error."

 BtnResetDB = "Reset Database"
 DlgResetDBTitle = "Reset Database"
 DlgResetDBMsg = "Delete all profiles and connection logs? This cannot be undone."

+BtnProfileList = "Profile List"
+ProfileListTitle = "Profile List"
+DlgNoListSelectTitle = "No Selection"
+DlgNoListSelectEditMsg = "Select a profile in the list to edit."
+DlgNoListSelectDeleteMsg = "Select a profile in the list to delete."
+
 TrayShowWindow = "Show Window"
 TrayConnect = "Connect"
 TrayDisconnect = "Disconnect"
@@ -82,3 +102,16 @@ AuthModePassword = "Password"
 RoutingModeFull = "Full Tunnel"
 RoutingModeSplit = "Split Tunnel"
 RoutingModeCustom = "Custom"
+
+FieldTLS = "TLS Certificate"
+FieldTLSCACert = "CA Certificate (PEM)"
+FieldTLSCAPath = "CA Certificate Path"
+HintTLSCAReplacesSystem = "Setting a custom CA replaces system root certificates. Public CA servers (e.g. Let's Encrypt) will fail verification."
+FieldTLSInsecure = "Skip Verification (Insecure)"
+FieldTLSPinnedHash = "Certificate Pin (SHA-256)"
+PlaceholderTLSCACert = "-----BEGIN CERTIFICATE-----..."
+PlaceholderTLSCAPath = "/path/to/ca.crt"
+PlaceholderTLSPinnedHash = "sha256:a1b2c3..."
+BtnBrowse = "Browse..."
+DlgTLSError = "TLS Certificate Error"
+TLSErrorVerification = "Server certificate verification failed."
@@ -24,10 +24,18 @@ Ip6None = "IPv6: —"
 IpNone = "IP: —"
 UptimeLabel = "运行时长: {{.uptime}}"
 UptimeNone = "运行时长: —"
-RxLabel = "↓ {{.bytes}}"
-TxLabel = "↑ {{.bytes}}"
-RxZero = "↓ 0 B"
-TxZero = "↑ 0 B"
+RxV4Label = "IPv4 ↓ {{.bytes}} {{.speed}}"
+TxV4Label = "↑ {{.bytes}} {{.speed}}"
+RxV6Label = "IPv6 ↓ {{.bytes}} {{.speed}}"
+TxV6Label = "↑ {{.bytes}} {{.speed}}"
+RxTotalLabel = "合计 ↓ {{.bytes}} {{.speed}}"
+TxTotalLabel = "↑ {{.bytes}} {{.speed}}"
+RxV4Zero = "IPv4 ↓ 0 B  0 bps"
+TxV4Zero = "↑ 0 B  0 bps"
+RxV6Zero = "IPv6 ↓ 0 B  0 bps"
+TxV6Zero = "↑ 0 B  0 bps"
+RxTotalZero = "合计 ↓ 0 B  0 bps"
+TxTotalZero = "↑ 0 B  0 bps"

 DlgNoProfileTitle = "无配置"
 DlgNoProfileEditMsg = "请选择要编辑的配置。"
@@ -45,11 +53,23 @@ DlgVPNError = "VPN 错误"
 DlgSaveError = "保存错误"
 DlgKeychainError = "钥匙串错误"
 DlgError = "错误"
+DlgAuthError = "认证失败"
+AuthErrWrongCredentials = "用户名或密码错误，请检查凭据。"
+AuthErrUserDisabled = "用户不存在或已被禁用。"
+AuthErrTokenInvalid = "认证令牌无效或已过期。"
+AuthErrRateLimited = "认证尝试过于频繁，请稍后再试。"
+AuthErrMalformed = "认证消息格式错误。"

 BtnResetDB = "重置数据库"
 DlgResetDBTitle = "重置数据库"
 DlgResetDBMsg = "删除所有配置和连接记录？此操作无法撤销。"

+BtnProfileList = "配置列表"
+ProfileListTitle = "配置列表"
+DlgNoListSelectTitle = "无选择"
+DlgNoListSelectEditMsg = "请在列表中选择一个配置。"
+DlgNoListSelectDeleteMsg = "请在列表中选择一个配置。"
+
 TrayShowWindow = "显示窗口"
 TrayConnect = "连接"
 TrayDisconnect = "断开连接"
@@ -82,3 +102,16 @@ AuthModePassword = "密码"
 RoutingModeFull = "全隧道"
 RoutingModeSplit = "分离隧道"
 RoutingModeCustom = "自定义"
+
+FieldTLS = "TLS 证书"
+FieldTLSCACert = "CA 证书 (PEM)"
+FieldTLSCAPath = "CA 证书路径"
+HintTLSCAReplacesSystem = "设置自定义 CA 将替换系统根证书，使用公共 CA（如 Let's Encrypt）的服务器将验证失败。"
+FieldTLSInsecure = "跳过验证 (不安全)"
+FieldTLSPinnedHash = "证书固定 (SHA-256)"
+PlaceholderTLSCACert = "-----BEGIN CERTIFICATE-----..."
+PlaceholderTLSCAPath = "/path/to/ca.crt"
+PlaceholderTLSPinnedHash = "sha256:a1b2c3..."
+BtnBrowse = "浏览..."
+DlgTLSError = "TLS 证书错误"
+TLSErrorVerification = "服务器证书验证失败。"
@@ -29,6 +29,7 @@ const (
 	CmdStop     = "stop"
 	CmdShutdown = "shutdown"
 	CmdStats    = "stats"
+	CmdVersion  = "version" // query daemon build version
 )

 // Event types sent from daemon to GUI.
@@ -48,16 +49,20 @@ type Request struct {
 // vpn.SessionConfig but is kept separate to avoid importing the vpn
 // package (which needs root-only TUN) into the GUI.
 type ClientConfig struct {
-	ServerURL   string   `json:"server_url"`
-	SNIHost     string   `json:"sni_host"`    // TLS SNI hostname for CDN
-	ServerIPs   []string `json:"server_ips"`  // CDN edge IP list for failover
-	Username    string   `json:"username"`
-	Password    string   `json:"password"`
-	Token       string   `json:"token"`
-	AuthMode    string   `json:"auth_mode"`
-	RoutingMode string   `json:"routing_mode"`
-	CustomCIDRs []string `json:"custom_cidrs"`
-	MTUOverride int      `json:"mtu_override"`
+	ServerURL     string   `json:"server_url"`
+	SNIHost       string   `json:"sni_host"`        // TLS SNI hostname for CDN
+	ServerIPs     []string `json:"server_ips"`      // CDN edge IP list for failover
+	Username      string   `json:"username"`
+	Password      string   `json:"password"`
+	Token         string   `json:"token"`
+	AuthMode      string   `json:"auth_mode"`
+	RoutingMode   string   `json:"routing_mode"`
+	CustomCIDRs   []string `json:"custom_cidrs"`
+	MTUOverride   int      `json:"mtu_override"`
+	TLSCACert     string   `json:"tls_ca_cert"`     // inline CA cert PEM (wss only)
+	TLSCAPath     string   `json:"tls_ca_path"`     // CA cert file path (wss only)
+	TLSInsecure   bool     `json:"tls_insecure"`    // skip cert verification (wss only)
+	TLSPinnedHash string   `json:"tls_pinned_hash"` // SHA-256 cert pin (wss only)
 }

 // Event is a notification from the daemon to the GUI.
@@ -65,6 +70,7 @@ type Event struct {
 	Event   string          `json:"event"`
 	State   string          `json:"state,omitempty"`
 	Stats   *stats.Snapshot `json:"stats,omitempty"`
+	Code    string          `json:"code,omitempty"` // stable auth-error code for EvError
 	Message string          `json:"message,omitempty"`
 }

@@ -98,15 +104,26 @@ type Server struct {
 }

 // NewServer creates (but does not start) the IPC server. It removes
-// any stale socket file first.
+// any stale socket file first (unix only).
 func NewServer() (*Server, error) {
-	_ = os.Remove(paths.IPCSocketPath())
-	l, err := net.Listen("unix", paths.IPCSocketPath())
+	netType := paths.IPCNetwork()
+	addr := paths.IPCAddress()
+
+	// Clean up stale unix socket file (not needed for TCP).
+	if netType == "unix" {
+		_ = os.Remove(addr)
+	}
+
+	l, err := net.Listen(netType, addr)
 	if err != nil {
 		return nil, fmt.Errorf("listen ipc: %w", err)
 	}
-	// Mode 0660 so group members (admin) can connect.
-	_ = os.Chmod(paths.IPCSocketPath(), 0o660)
+
+	// Set socket permissions so group members can connect (unix only).
+	if netType == "unix" {
+		_ = os.Chmod(addr, 0o660)
+	}
+
 	return &Server{listener: l, clients: make(map[net.Conn]bool)}, nil
 }

@@ -176,7 +193,7 @@ type Client struct {

 // Dial connects to the daemon.
 func Dial() (*Client, error) {
-	conn, err := net.Dial("unix", paths.IPCSocketPath())
+	conn, err := net.Dial(paths.IPCNetwork(), paths.IPCAddress())
 	if err != nil {
 		return nil, fmt.Errorf("dial daemon: %w", err)
 	}
@@ -203,8 +220,9 @@ func (c *Client) Close() error { return c.conn.Close() }

 // Response is a simple ack/error reply to a command.
 type Response struct {
-	OK    bool   `json:"ok"`
-	Error string `json:"error,omitempty"`
+	OK      bool   `json:"ok"`
+	Error   string `json:"error,omitempty"`
+	Version string `json:"version,omitempty"` // set for CmdVersion replies
 }

 // WriteOK sends a success response to a connection.
@@ -232,6 +250,28 @@ func SendShutdown(c *Client) error {
 	return c.Send(Request{Cmd: CmdShutdown})
 }

+// WriteVersion sends a version response to a connection.
+func WriteVersion(conn net.Conn, ver string) error {
+	return writeMsg(conn, Response{OK: true, Version: ver})
+}
+
+// QueryVersion sends a CmdVersion request and reads the daemon's
+// build version. It must be called before any VPN session starts (so
+// no Event messages are in flight on the connection).
+func (c *Client) QueryVersion() (string, error) {
+	if err := c.Send(Request{Cmd: CmdVersion}); err != nil {
+		return "", err
+	}
+	var resp Response
+	if err := readMsg(c.r, &resp); err != nil {
+		return "", err
+	}
+	if !resp.OK {
+		return "", fmt.Errorf("version query failed: %s", resp.Error)
+	}
+	return resp.Version, nil
+}
+
 // RoutingModeFromIPC converts an IPC routing mode string to route.Mode.
 func RoutingModeFromIPC(s string) route.Mode {
 	switch s {
@@ -1,8 +1,11 @@
-//go:build !darwin
+//go:build !darwin && !windows

 package keychain

-// MemStore is an in-memory fallback used on non-darwin platforms.
+// MemStore is an in-memory fallback used on non-darwin, non-windows
+// platforms (currently Linux). Passwords do not persist across
+// restarts; a platform-appropriate backend (e.g. Secret Service)
+// should be added for production use.
 type MemStore struct {
 	data map[string]string
 }
@@ -0,0 +1,94 @@
+//go:build windows
+
+package keychain
+
+import (
+	"errors"
+	"fmt"
+
+	"github.com/danieljoos/wincred"
+)
+
+// keyPrefixes distinguish password vs token entries in the credential
+// store, mirroring the macOS implementation.
+const (
+	passwordAccountPrefix = "password:"
+	tokenAccountPrefix    = "token:"
+)
+
+// WinStore implements Store using the Windows Credential Manager.
+type WinStore struct{}
+
+// New returns a Windows Credential Manager-backed Store.
+func New() Store {
+	return WinStore{}
+}
+
+// targetName builds the credential TargetName from the account prefix
+// and profile name: "<BundleID>/<prefix><profile>".
+func targetName(account string) string {
+	return ServiceName + "/" + account
+}
+
+func (WinStore) setItem(account, secret string) error {
+	cred := wincred.NewGenericCredential(targetName(account))
+	cred.CredentialBlob = []byte(secret)
+	if err := cred.Write(); err != nil {
+		return fmt.Errorf("wincred write %s: %w", account, err)
+	}
+	return nil
+}
+
+func (WinStore) getItem(account string) (string, error) {
+	cred, err := wincred.GetGenericCredential(targetName(account))
+	if err != nil {
+		if errors.Is(err, wincred.ErrElementNotFound) {
+			return "", ErrNotFound
+		}
+		return "", fmt.Errorf("wincred read %s: %w", account, err)
+	}
+	return string(cred.CredentialBlob), nil
+}
+
+func (WinStore) deleteItem(account string) error {
+	cred, err := wincred.GetGenericCredential(targetName(account))
+	if err != nil {
+		if errors.Is(err, wincred.ErrElementNotFound) {
+			return nil // already gone — treat as success
+		}
+		return fmt.Errorf("wincred read %s: %w", account, err)
+	}
+	if err := cred.Delete(); err != nil {
+		return fmt.Errorf("wincred delete %s: %w", account, err)
+	}
+	return nil
+}
+
+func (s WinStore) SetPassword(profileName, password string) error {
+	return s.setItem(passwordAccountPrefix+profileName, password)
+}
+
+func (s WinStore) GetPassword(profileName string) (string, error) {
+	return s.getItem(passwordAccountPrefix + profileName)
+}
+
+func (s WinStore) DeletePassword(profileName string) error {
+	return s.deleteItem(passwordAccountPrefix + profileName)
+}
+
+func (s WinStore) SetToken(profileName, token string) error {
+	return s.setItem(tokenAccountPrefix+profileName, token)
+}
+
+func (s WinStore) GetToken(profileName string) (string, error) {
+	return s.getItem(tokenAccountPrefix + profileName)
+}
+
+func (s WinStore) DeleteToken(profileName string) error {
+	return s.deleteItem(tokenAccountPrefix + profileName)
+}
+
+func (s WinStore) DeleteAll(profileName string) error {
+	_ = s.DeletePassword(profileName)
+	return s.DeleteToken(profileName)
+}
@@ -41,6 +41,10 @@ type ServerProfile struct {
 	CustomCIDRs     string      `json:"custom_cidrs"` // comma-separated, for RoutingCustom
 	MTUOverride     int         `json:"mtu_override"` // 0 = use server MTU
 	AutoConnect     bool        `json:"auto_connect"`
+	TLSCACert       string      `json:"tls_ca_cert"`      // inline CA certificate PEM (wss only)
+	TLSCAPath       string      `json:"tls_ca_path"`      // path to CA certificate file (wss only)
+	TLSInsecure     bool        `json:"tls_insecure"`     // skip certificate verification (wss only)
+	TLSPinnedHash   string      `json:"tls_pinned_hash"`  // SHA-256 fingerprint of server leaf cert (wss only)
 	CreatedAt       time.Time   `json:"created_at"`
 	LastConnectedAt *time.Time  `json:"last_connected_at"`
 }
@@ -57,6 +57,4 @@ func LogFile() string { return Paths.Log + "/lmvpn.log" }
 // DaemonLogFile returns the path to the daemon log file.
 func DaemonLogFile() string { return Paths.Log + "/lmvpn-daemon.log" }

-// IPCSocketPath returns the path to the unix domain socket used for
-// GUI <-> daemon communication.
-func IPCSocketPath() string { return "/tmp/lmvpn.sock" }
+
@@ -7,6 +7,12 @@ import (
 	"path/filepath"
 )

+// IPCNetwork returns the transport network for GUI <-> daemon IPC.
+func IPCNetwork() string { return "unix" }
+
+// IPCAddress returns the listen/dial address for GUI <-> daemon IPC.
+func IPCAddress() string { return "/tmp/lmvpn.sock" }
+
 func init() {
 	home, _ := os.UserHomeDir()
 	recomputePaths(home)
@@ -1,4 +1,4 @@
-//go:build !darwin
+//go:build !darwin && !windows

 package paths

@@ -7,6 +7,12 @@ import (
 	"path/filepath"
 )

+// IPCNetwork returns the transport network for GUI <-> daemon IPC.
+func IPCNetwork() string { return "unix" }
+
+// IPCAddress returns the listen/dial address for GUI <-> daemon IPC.
+func IPCAddress() string { return "/tmp/lmvpn.sock" }
+
 func init() {
 	home, _ := os.UserHomeDir()
 	recomputePaths(home)
@@ -0,0 +1,48 @@
+//go:build windows
+
+package paths
+
+import (
+	"os"
+	"path/filepath"
+)
+
+// IPCNetwork returns the transport network for GUI <-> daemon IPC.
+// Windows uses TCP because AF_UNIX sockets enforce mandatory
+// integrity-level checks: a socket created by the elevated daemon
+// (High Integrity) cannot be connected to by the non-elevated GUI
+// (Medium Integrity). TCP on 127.0.0.1 has no such restriction.
+func IPCNetwork() string { return "tcp" }
+
+// IPCAddress returns the listen/dial address for GUI <-> daemon IPC.
+// On Windows this is a TCP address on localhost.
+const ipcPort = "18923"
+
+func IPCAddress() string { return "127.0.0.1:" + ipcPort }
+
+func init() {
+	home, _ := os.UserHomeDir()
+	recomputePaths(home)
+}
+
+// recomputePaths sets Paths based on the given home directory.
+// On Windows the layout follows platform conventions:
+//
+//	%APPDATA%\<BundleID>\      data (db, config)
+//	%LOCALAPPDATA%\<BundleID>\ cache
+//	%LOCALAPPDATA%\<BundleID>\Logs\  logs
+func recomputePaths(home string) {
+	appData := os.Getenv("APPDATA")
+	if appData == "" {
+		appData = filepath.Join(home, "AppData", "Roaming")
+	}
+	localAppData := os.Getenv("LOCALAPPDATA")
+	if localAppData == "" {
+		localAppData = filepath.Join(home, "AppData", "Local")
+	}
+	Paths = Dirs{
+		Data:  filepath.Join(appData, BundleID),
+		Cache: filepath.Join(localAppData, BundleID),
+		Log:   filepath.Join(localAppData, BundleID, "Logs"),
+	}
+}
@@ -69,3 +69,39 @@ type AuthResponse struct {
 func IsError(msgType string) bool {
 	return msgType == TypeAuthErr || msgType == TypeError
 }
+
+// AuthErrorCode is a stable, locale-independent identifier for a fatal
+// authentication failure. It is derived from the server's auth_err
+// message (or HTTP status for the JWT login path) and carried over IPC
+// to the GUI, which maps it to a localized user-facing string.
+type AuthErrorCode string
+
+const (
+	AuthCodeWrongCredentials AuthErrorCode = "wrong_credentials" // 用户名或密码错误 / HTTP 401,403
+	AuthCodeUserDisabled     AuthErrorCode = "user_disabled"     // 用户不存在或已禁用
+	AuthCodeTokenInvalid     AuthErrorCode = "token_invalid"     // 令牌无效或已过期
+	AuthCodeRateLimited      AuthErrorCode = "rate_limited"      // 认证尝试过于频繁 / HTTP 429
+	AuthCodeMalformed        AuthErrorCode = "malformed"         // 消息格式错误
+)
+
+// AuthErrorCodeFromMessage maps a server auth_err message string to a
+// stable AuthErrorCode. It returns the empty string for an unrecognized
+// message, in which case the caller should treat the failure as
+// non-categorical (and typically still fatal, since the server closes
+// the connection after auth_err).
+func AuthErrorCodeFromMessage(msg string) AuthErrorCode {
+	switch msg {
+	case "用户名或密码错误":
+		return AuthCodeWrongCredentials
+	case "用户不存在或已禁用":
+		return AuthCodeUserDisabled
+	case "令牌无效或已过期":
+		return AuthCodeTokenInvalid
+	case "认证尝试过于频繁，请稍后再试":
+		return AuthCodeRateLimited
+	case "消息格式错误":
+		return AuthCodeMalformed
+	default:
+		return ""
+	}
+}
@@ -138,12 +138,14 @@ func (m *Manager) applyFull() error {
 	}

 	// Bypass: server's public IPv6 via the original v6 gateway.
+	// Non-fatal: if this fails, full-tunnel routes are still added.
 	if v6 != "" && gw6 != "" {
 		bypassSpec := v6 + "/128"
 		if err := addRouteVia6(bypassSpec, gw6); err != nil {
-			return fmt.Errorf("add server bypass6 route: %w", err)
+			m.serverBypass6 = false
+		} else {
+			m.serverBypass6 = true
 		}
-		m.serverBypass6 = true
 	}

 	// Two /1 routes cover the entire IPv4 space and are more specific
@@ -1,4 +1,4 @@
-//go:build !darwin
+//go:build !darwin && !windows

 package route

@@ -0,0 +1,173 @@
+//go:build windows
+
+package route
+
+import (
+	"fmt"
+	"net"
+	"os/exec"
+	"strings"
+)
+
+// cidrToNetworkMask splits a CIDR string into network address and
+// dotted-decimal mask, as required by the Windows `route` command.
+func cidrToNetworkMask(cidr string) (network, mask string, err error) {
+	_, ipNet, err := net.ParseCIDR(cidr)
+	if err != nil {
+		return "", "", err
+	}
+	return ipNet.IP.String(), net.IP(ipNet.Mask).String(), nil
+}
+
+// ifaceIndex resolves a Windows interface name to its index.
+func ifaceIndex(name string) (int, error) {
+	ifc, err := net.InterfaceByName(name)
+	if err != nil {
+		return 0, fmt.Errorf("resolve interface %s: %w", name, err)
+	}
+	return ifc.Index, nil
+}
+
+// --- IPv4 ---
+
+func addRoute(cidr, iface string) error {
+	network, mask, err := cidrToNetworkMask(cidr)
+	if err != nil {
+		return err
+	}
+	idx, err := ifaceIndex(iface)
+	if err != nil {
+		return err
+	}
+	return runCmd("route", "add", network, "mask", mask, "0.0.0.0",
+		"if", fmt.Sprintf("%d", idx), "metric", "1")
+}
+
+func deleteRoute(cidr, iface string) error {
+	network, mask, err := cidrToNetworkMask(cidr)
+	if err != nil {
+		return err
+	}
+	return runCmd("route", "delete", network, "mask", mask)
+}
+
+func addRouteVia(cidr, gateway string) error {
+	network, mask, err := cidrToNetworkMask(cidr)
+	if err != nil {
+		return err
+	}
+	return runCmd("route", "add", network, "mask", mask, gateway, "metric", "1")
+}
+
+func deleteRouteVia(cidr, gateway string) error {
+	network, mask, err := cidrToNetworkMask(cidr)
+	if err != nil {
+		return err
+	}
+	return runCmd("route", "delete", network, "mask", mask, gateway)
+}
+
+// --- IPv6 ---
+
+// cidrToV6Prefix splits an IPv6 CIDR into network and prefix length.
+func cidrToV6Prefix(cidr string) (network, prefix string, err error) {
+	_, ipNet, err := net.ParseCIDR(cidr)
+	if err != nil {
+		return "", "", err
+	}
+	ones, _ := ipNet.Mask.Size()
+	return ipNet.IP.String(), fmt.Sprintf("%d", ones), nil
+}
+
+func addRoute6(cidr, iface string) error {
+	network, prefix, err := cidrToV6Prefix(cidr)
+	if err != nil {
+		return err
+	}
+	idx, err := ifaceIndex(iface)
+	if err != nil {
+		return err
+	}
+	return runCmd("route", "-6", "add", network+"/"+prefix, "::",
+		"if", fmt.Sprintf("%d", idx), "metric", "1")
+}
+
+func deleteRoute6(cidr, iface string) error {
+	network, prefix, err := cidrToV6Prefix(cidr)
+	if err != nil {
+		return err
+	}
+	return runCmd("route", "-6", "delete", network+"/"+prefix, "::")
+}
+
+func addRouteVia6(cidr, gateway string) error {
+	network, prefix, err := cidrToV6Prefix(cidr)
+	if err != nil {
+		return err
+	}
+	return runCmd("route", "-6", "add", network+"/"+prefix, gateway, "metric", "1")
+}
+
+func deleteRouteVia6(cidr, gateway string) error {
+	network, prefix, err := cidrToV6Prefix(cidr)
+	if err != nil {
+		return err
+	}
+	return runCmd("route", "-6", "delete", network+"/"+prefix, gateway)
+}
+
+// --- Default gateway ---
+
+func defaultGateway() (string, error) {
+	out, err := exec.Command("route", "print", "0.0.0.0").Output()
+	if err != nil {
+		return "", err
+	}
+	return parseRouteGateway(string(out))
+}
+
+func defaultGateway6() (string, error) {
+	out, err := exec.Command("route", "-6", "print").Output()
+	if err != nil {
+		return "", err
+	}
+	return parseRoute6Gateway(string(out))
+}
+
+// parseRouteGateway extracts the IPv4 default gateway from `route print`
+// output. Looks for the line with Network Destination 0.0.0.0 and
+// Netmask 0.0.0.0, and returns the Gateway column.
+func parseRouteGateway(out string) (string, error) {
+	lines := strings.Split(out, "\n")
+	for _, line := range lines {
+		fields := strings.Fields(line)
+		if len(fields) >= 3 && fields[0] == "0.0.0.0" && fields[1] == "0.0.0.0" {
+			return fields[2], nil
+		}
+	}
+	return "", fmt.Errorf("no default gateway found")
+}
+
+// parseRoute6Gateway extracts the IPv6 default gateway from
+// `route -6 print` output. Looks for ::/0 route and returns the
+// Gateway column.
+func parseRoute6Gateway(out string) (string, error) {
+	lines := strings.Split(out, "\n")
+	for _, line := range lines {
+		fields := strings.Fields(line)
+		for i, f := range fields {
+			if f == "::/0" && i+1 < len(fields) {
+				return fields[i+1], nil
+			}
+		}
+	}
+	return "", fmt.Errorf("no IPv6 default gateway found")
+}
+
+func runCmd(name string, args ...string) error {
+	cmd := exec.Command(name, args...)
+	if out, err := cmd.CombinedOutput(); err != nil {
+		return fmt.Errorf("%s %s: %w (%s)", name, strings.Join(args, " "), err, strings.TrimSpace(string(out)))
+	}
+	return nil
+}
@@ -19,15 +19,57 @@ const (

 // Stats holds live session statistics. Counters are atomic for
 // lock-free reads from the UI/IPC layer.
+//
+// Counters are split by IP address family (v4/v6) at the recording
+// site via AddRx/AddTx, which inspect the IP version nibble. The
+// combined RxBytes/TxBytes are derived as the sum of the per-family
+// counters in Snapshot, so callers that only need the total still
+// work.
 type Stats struct {
-	RxBytes     atomic.Int64
-	TxBytes     atomic.Int64
+	RxBytesV4   atomic.Int64
+	RxBytesV6   atomic.Int64
+	TxBytesV4   atomic.Int64
+	TxBytesV6   atomic.Int64
 	ConnectedAt atomic.Int64 // unix timestamp, 0 = not connected
 	state       atomic.Value // State
 	assignedIP  atomic.Value // string (IPv4)
 	assignedIP6 atomic.Value // string (IPv6, may be empty)
 }

+// AddRx records a downloaded packet (WebSocket → TUN) of length n,
+// routing the bytes to the v4 or v6 counter based on the IP version
+// nibble of the packet. Packets too short to contain a version byte
+// or with an unknown version are ignored.
+func (s *Stats) AddRx(p []byte) {
+	if len(p) == 0 {
+		return
+	}
+	n := int64(len(p))
+	switch p[0] >> 4 {
+	case 4:
+		s.RxBytesV4.Add(n)
+	case 6:
+		s.RxBytesV6.Add(n)
+	}
+}
+
+// AddTx records an uploaded packet (TUN → WebSocket) of length n,
+// routing the bytes to the v4 or v6 counter based on the IP version
+// nibble of the packet. Packets too short to contain a version byte
+// or with an unknown version are ignored.
+func (s *Stats) AddTx(p []byte) {
+	if len(p) == 0 {
+		return
+	}
+	n := int64(len(p))
+	switch p[0] >> 4 {
+	case 4:
+		s.TxBytesV4.Add(n)
+	case 6:
+		s.TxBytesV6.Add(n)
+	}
+}
+
 // New creates a Stats instance initialised to the disconnected state.
 func New() *Stats {
 	s := &Stats{}
@@ -67,9 +109,27 @@ func (s *Stats) AssignedIP() string { return s.assignedIP.Load().(string) }
 func (s *Stats) AssignedIP6() string { return s.assignedIP6.Load().(string) }

 // Snapshot returns a point-in-time copy of all counters.
+//
+// Per-family byte counters are read directly. The combined RxBytes/
+// TxBytes are derived as v4+v6. Speed fields (RxSpeedV4 etc.) are
+// left zero here; the SessionManager fills them in by computing
+// per-tick deltas with EWMA smoothing.
 type Snapshot struct {
-	RxBytes     int64
-	TxBytes     int64
+	RxBytesV4 int64
+	RxBytesV6 int64
+	TxBytesV4 int64
+	TxBytesV6 int64
+	RxBytes   int64 // combined (v4+v6)
+	TxBytes   int64 // combined (v4+v6)
+
+	// Speeds in bytes/sec (EWMA-smoothed). The UI converts to bits/sec.
+	RxSpeedV4 int64
+	TxSpeedV4 int64
+	RxSpeedV6 int64
+	TxSpeedV6 int64
+	RxSpeed   int64 // combined
+	TxSpeed   int64 // combined
+
 	ConnectedAt time.Time
 	AssignedIP  string
 	AssignedIP6 string
@@ -79,9 +139,17 @@ type Snapshot struct {

 // Snapshot returns a point-in-time copy of the statistics.
 func (s *Stats) Snapshot() Snapshot {
+	rxv4 := s.RxBytesV4.Load()
+	rxv6 := s.RxBytesV6.Load()
+	txv4 := s.TxBytesV4.Load()
+	txv6 := s.TxBytesV6.Load()
 	snap := Snapshot{
-		RxBytes:     s.RxBytes.Load(),
-		TxBytes:     s.TxBytes.Load(),
+		RxBytesV4:   rxv4,
+		RxBytesV6:   rxv6,
+		TxBytesV4:   txv4,
+		TxBytesV6:   txv6,
+		RxBytes:     rxv4 + rxv6,
+		TxBytes:     txv4 + txv6,
 		AssignedIP:  s.AssignedIP(),
 		AssignedIP6: s.AssignedIP6(),
 		State:       s.State(),
@@ -0,0 +1,157 @@
+// Package tlsconfig builds *tls.Config instances from user-supplied
+// verification settings (custom CA, insecure mode, certificate
+// pinning). It is shared by the WebSocket transport and the HTTP
+// login client so both paths enforce identical TLS policy.
+package tlsconfig
+
+import (
+	"bytes"
+	"crypto/sha256"
+	"crypto/tls"
+	"crypto/x509"
+	"encoding/hex"
+	"errors"
+	"fmt"
+	"os"
+	"strings"
+)
+
+// Config holds TLS verification settings for a server connection.
+type Config struct {
+	ServerName         string // TLS SNI hostname (for CDN edge IP connections)
+	CACertPEM          string // inline CA certificate PEM content
+	CACertPath         string // path to a CA certificate file
+	InsecureSkipVerify bool   // skip chain verification entirely
+	PinnedCertHash     string // SHA-256 fingerprint of the leaf cert (hex, optional "sha256:" prefix)
+}
+
+// Build creates a *tls.Config from the given settings.
+//
+// Verification behaviour matrix:
+//
+//	Pin set | Insecure | Behaviour
+//	--------+----------+-------------------------------------------
+//	  no    |   no     | Normal chain + hostname verification (Go default)
+//	  no    |   yes    | All verification skipped
+//	  yes   |   no     | Normal chain verification, then pin check
+//	  yes   |   yes    | Chain skipped, pin check only
+func Build(cfg Config) (*tls.Config, error) {
+	tlsCfg := &tls.Config{
+		ServerName: cfg.ServerName,
+	}
+
+	if cfg.CACertPEM != "" || cfg.CACertPath != "" {
+		pool, err := buildCertPool(cfg.CACertPEM, cfg.CACertPath)
+		if err != nil {
+			return nil, fmt.Errorf("load CA cert: %w", err)
+		}
+		tlsCfg.RootCAs = pool
+	}
+
+	var pin []byte
+	if cfg.PinnedCertHash != "" {
+		var err error
+		pin, err = decodePin(cfg.PinnedCertHash)
+		if err != nil {
+			return nil, fmt.Errorf("invalid pinned cert hash: %w", err)
+		}
+	}
+
+	if pin != nil {
+		if cfg.InsecureSkipVerify {
+			tlsCfg.InsecureSkipVerify = true
+		}
+		tlsCfg.VerifyPeerCertificate = func(rawCerts [][]byte, _ [][]*x509.Certificate) error {
+			return verifyPin(rawCerts, pin)
+		}
+	} else if cfg.InsecureSkipVerify {
+		tlsCfg.InsecureSkipVerify = true
+	}
+
+	return tlsCfg, nil
+}
+
+// PinMismatchError indicates the server leaf certificate does not
+// match the pinned SHA-256 fingerprint.
+type PinMismatchError struct {
+	Expected []byte
+	Got      []byte
+}
+
+func (e *PinMismatchError) Error() string {
+	return fmt.Sprintf("certificate pin mismatch: expected %x, got %x", e.Expected, e.Got)
+}
+
+// IsTLSError reports whether err represents a TLS certificate
+// verification failure that will not resolve on retry.
+func IsTLSError(err error) bool {
+	var certInvalid *x509.CertificateInvalidError
+	if errors.As(err, &certInvalid) {
+		return true
+	}
+	var hostErr *x509.HostnameError
+	if errors.As(err, &hostErr) {
+		return true
+	}
+	var unknownAuth *x509.UnknownAuthorityError
+	if errors.As(err, &unknownAuth) {
+		return true
+	}
+	var verifyErr *tls.CertificateVerificationError
+	if errors.As(err, &verifyErr) {
+		return true
+	}
+	var pinErr *PinMismatchError
+	if errors.As(err, &pinErr) {
+		return true
+	}
+	return false
+}
+
+func buildCertPool(pemData, path string) (*x509.CertPool, error) {
+	pool := x509.NewCertPool()
+
+	if pemData != "" {
+		if !pool.AppendCertsFromPEM([]byte(pemData)) {
+			return nil, errors.New("failed to parse inline CA certificate PEM")
+		}
+	}
+
+	if path != "" {
+		data, err := os.ReadFile(path)
+		if err != nil {
+			return nil, fmt.Errorf("read CA cert file %s: %w", path, err)
+		}
+		if !pool.AppendCertsFromPEM(data) {
+			return nil, errors.New("failed to parse CA certificate file")
+		}
+	}
+
+	return pool, nil
+}
+
+func decodePin(s string) ([]byte, error) {
+	s = strings.TrimSpace(s)
+	if strings.HasPrefix(s, "sha256:") {
+		s = s[len("sha256:"):]
+	}
+	pin, err := hex.DecodeString(s)
+	if err != nil {
+		return nil, fmt.Errorf("invalid hex: %w", err)
+	}
+	if len(pin) != sha256.Size {
+		return nil, fmt.Errorf("expected %d bytes, got %d", sha256.Size, len(pin))
+	}
+	return pin, nil
+}
+
+func verifyPin(rawCerts [][]byte, pin []byte) error {
+	if len(rawCerts) == 0 {
+		return errors.New("no server certificate provided")
+	}
+	h := sha256.Sum256(rawCerts[0])
+	if !bytes.Equal(h[:], pin) {
+		return &PinMismatchError{Expected: pin, Got: h[:]}
+	}
+	return nil
+}
@@ -36,6 +36,7 @@ type HandshakeConfig struct {
 	Username  string                           // for password auth (method B), or fallback
 	Password  string                           // for password auth (method B), or fallback
 	OnInit    func(protocol.InitMessage) error // configure TUN; nil = auto-ready
+	TLSConfig *tls.Config                      // pre-built TLS config (nil = derive from SNIHost)
 }

 // Conn is an established VPN tunnel connection.
@@ -57,7 +58,9 @@ func Connect(ctx context.Context, cfg HandshakeConfig) (*Conn, error) {
 		WriteBufferSize:  4096, // match server (handler.go:18)
 	}

-	if cfg.SNIHost != "" {
+	if cfg.TLSConfig != nil {
+		dialer.TLSClientConfig = cfg.TLSConfig
+	} else if cfg.SNIHost != "" {
 		dialer.TLSClientConfig = &tls.Config{
 			ServerName: cfg.SNIHost,
 		}
@@ -158,7 +161,7 @@ func (c *Conn) passwordAuth(username, password string) error {
 		return fmt.Errorf("parse auth response: %w", err)
 	}
 	if resp.Type == protocol.TypeAuthErr {
-		return &AuthError{Message: resp.Message}
+		return &AuthError{Message: resp.Message, Code: protocol.AuthErrorCodeFromMessage(resp.Message)}
 	}
 	if resp.Type != protocol.TypeAuthOK {
 		return fmt.Errorf("unexpected auth response type: %s", resp.Type)
@@ -186,7 +189,11 @@ func (c *Conn) readInit() (protocol.InitMessage, error) {
 		return protocol.InitMessage{}, fmt.Errorf("parse init/error: %w (raw: %s)", err, data)
 	}
 	if ctrl.Type == protocol.TypeError || ctrl.Type == protocol.TypeAuthErr {
-		return protocol.InitMessage{}, &ServerError{Type: ctrl.Type, Message: ctrl.Message}
+		return protocol.InitMessage{}, &ServerError{
+			Type:    ctrl.Type,
+			Message: ctrl.Message,
+			Code:    protocol.AuthErrorCodeFromMessage(ctrl.Message),
+		}
 	}
 	return protocol.InitMessage{}, fmt.Errorf("unexpected message type: %s", ctrl.Type)
 }
@@ -254,7 +261,10 @@ func (c *Conn) Close() error {
 }

 // AuthError indicates authentication failure (auth_err from server).
-type AuthError struct{ Message string }
+type AuthError struct {
+	Message string
+	Code    protocol.AuthErrorCode
+}

 func (e *AuthError) Error() string { return "auth failed: " + e.Message }

@@ -262,6 +272,7 @@ func (e *AuthError) Error() string { return "auth failed: " + e.Message }
 type ServerError struct {
 	Type    string
 	Message string
+	Code    protocol.AuthErrorCode
 }

 func (e *ServerError) Error() string {
@@ -1,4 +1,4 @@
-//go:build !darwin
+//go:build !darwin && !windows

 package tun

@@ -0,0 +1,157 @@
+//go:build windows
+
+// Package tun — Windows implementation using WinTun.
+//
+// WinTun is a userspace TUN driver for Windows developed by the
+// WireGuard project. It requires only a single wintun.dll (MIT
+// licensed) placed next to the executable — no driver installation
+// is needed.
+//
+// The DLL is embedded at compile time via //go:embed and extracted
+// to the executable's directory on first use.
+package tun
+
+import (
+	_ "embed"
+	"fmt"
+	"net"
+	"os"
+	"os/exec"
+	"path/filepath"
+	"strings"
+
+	"golang.org/x/sys/windows"
+	"golang.zx2c4.com/wintun"
+)
+
+//go:embed wintun.dll
+var wintunDLL []byte
+
+type wintunDevice struct {
+	adapter  *wintun.Adapter
+	session  wintun.Session
+	readWait windows.Handle
+	name     string
+}
+
+func createTUN(name string) (Device, error) {
+	if err := ensureWintunDLL(); err != nil {
+		return nil, fmt.Errorf("extract wintun.dll: %w", err)
+	}
+	if name == "" {
+		name = "LMVPN"
+	}
+	adapter, err := wintun.CreateAdapter(name, "Wintun", nil)
+	if err != nil {
+		return nil, fmt.Errorf("create wintun adapter: %w", err)
+	}
+	session, err := adapter.StartSession(0x800000) // 8 MiB ring
+	if err != nil {
+		adapter.Close()
+		return nil, fmt.Errorf("start wintun session: %w", err)
+	}
+	return &wintunDevice{
+		adapter:  adapter,
+		session:  session,
+		readWait: session.ReadWaitEvent(),
+		name:     name,
+	}, nil
+}
+
+func (d *wintunDevice) Name() string                { return d.name }
+func (d *wintunDevice) Close() error                { d.session.End(); return d.adapter.Close() }
+
+func (d *wintunDevice) Read(p []byte) (int, error) {
+	for {
+		packet, err := d.session.ReceivePacket()
+		if err == nil {
+			n := copy(p, packet)
+			d.session.ReleaseReceivePacket(packet)
+			return n, nil
+		}
+		if err == windows.ERROR_NO_MORE_ITEMS {
+			windows.WaitForSingleObject(d.readWait, windows.INFINITE)
+			continue
+		}
+		if err == windows.ERROR_HANDLE_EOF {
+			return 0, fmt.Errorf("wintun closed")
+		}
+		return 0, fmt.Errorf("wintun read: %w", err)
+	}
+}
+
+func (d *wintunDevice) Write(p []byte) (int, error) {
+	buf, err := d.session.AllocateSendPacket(len(p))
+	if err != nil {
+		if err == windows.ERROR_HANDLE_EOF {
+			return 0, fmt.Errorf("wintun closed")
+		}
+		return 0, fmt.Errorf("wintun allocate: %w", err)
+	}
+	copy(buf, p)
+	d.session.SendPacket(buf)
+	return len(p), nil
+}
+
+func (d *wintunDevice) Configure(localIP net.IP, prefix int, peerIP net.IP) error {
+	if localIP == nil {
+		return execCmd("netsh", "interface", "ip", "set", "address", "name="+d.name, "source=dhcp")
+	}
+	if localIP.To4() == nil {
+		return d.configureIPv6Addr(localIP, prefix)
+	}
+	mask := net.IP(net.CIDRMask(prefix, 32))
+	return execCmd("netsh", "interface", "ip", "set", "address",
+		"name="+d.name, "source=static",
+		"addr="+localIP.String(), "mask="+mask.String())
+}
+
+func (d *wintunDevice) ConfigureIPv6(localIP6 net.IP, prefix6 int) error {
+	if localIP6 == nil {
+		return nil
+	}
+	return d.configureIPv6Addr(localIP6, prefix6)
+}
+
+func (d *wintunDevice) configureIPv6Addr(ip net.IP, prefix int) error {
+	addr := fmt.Sprintf("%s/%d", ip.String(), prefix)
+	return execCmd("netsh", "interface", "ipv6", "add", "address",
+		"interface="+d.name, "address="+addr)
+}
+
+func (d *wintunDevice) SetMTU(mtu int) error {
+	if err := execCmd("netsh", "interface", "ipv4", "set", "subinterface",
+		"name="+d.name, fmt.Sprintf("mtu=%d", mtu)); err != nil {
+		return err
+	}
+	return execCmd("netsh", "interface", "ipv6", "set", "subinterface",
+		"interface="+d.name, fmt.Sprintf("mtu=%d", mtu))
+}
+
+// ensureWintunDLL extracts the embedded wintun.dll to the executable's
+// directory if it does not already exist. The wintun Go package loads
+// the DLL via LoadLibrary which searches the exe's directory first.
+func ensureWintunDLL() error {
+	exe, err := os.Executable()
+	if err != nil {
+		return err
+	}
+	path := filepath.Join(filepath.Dir(exe), "wintun.dll")
+	if _, err := os.Stat(path); err == nil {
+		return nil
+	}
+	return os.WriteFile(path, wintunDLL, 0o644)
+}
+
+// execCmd runs a command, forwarding stdout/stderr.
+func execCmd(name string, arg ...string) error {
+	cmd := exec.Command(name, arg...)
+	cmd.Stdout = os.Stdout
+	cmd.Stderr = os.Stderr
+	if err := cmd.Run(); err != nil {
+		return fmt.Errorf("%s %s: %w", name, strings.Join(arg, " "), err)
+	}
+	return nil
+}
+
+
@@ -27,14 +27,23 @@ type App struct {
 	window        fyne.Window
 	profileWindow fyne.Window

+	// Profile list window.
+	profileListWindow fyne.Window
+	profileList       *widget.List
+	listSelectedIndex int
+
 	// UI widgets
 	profileSelect *widget.Select
 	stateLabel    *widget.Label
 	ipLabel       *widget.Label
 	ip6Label      *widget.Label
 	uptimeLabel   *widget.Label
-	rxLabel       *widget.Label
-	txLabel       *widget.Label
+	rxV4Label     *widget.Label
+	txV4Label     *widget.Label
+	rxV6Label     *widget.Label
+	txV6Label     *widget.Label
+	rxTotalLabel  *widget.Label
+	txTotalLabel  *widget.Label
 	connectBtn    *widget.Button
 	disconnectBtn *widget.Button

@@ -71,10 +80,11 @@ func Run() {
 	}

 	a := &App{
-		fyneApp:     app.NewWithID(paths.BundleID),
-		db:          store,
-		kc:          keychain.New(),
-		langSetting: cfg.Language,
+		fyneApp:           app.NewWithID(paths.BundleID),
+		db:                store,
+		kc:                keychain.New(),
+		langSetting:       cfg.Language,
+		listSelectedIndex: -1,
 	}

 	a.window = a.fyneApp.NewWindow(i18n.T("WindowTitle"))
@@ -102,13 +112,26 @@ func Run() {
 			hideDockIcon()
 			a.window.Hide()
 		} else {
-			a.fyneApp.Quit()
+			a.quit()
 		}
 	})

 	a.window.ShowAndRun()
 }

+// quit disconnects any active VPN session (via the daemon) and then
+// quits the application. The daemon process itself remains running.
+func (a *App) quit() {
+	a.mu.Lock()
+	client := a.ipcClient
+	a.ipcClient = nil
+	a.mu.Unlock()
+	if client != nil {
+		_ = ipc.SendStop(client)
+	}
+	a.fyneApp.Quit()
+}
+
 // loadProfiles loads all profiles from the database and populates the
 // selector.
 func (a *App) loadProfiles() {
@@ -128,6 +151,16 @@ func (a *App) loadProfiles() {
 		a.profileSelect.SetSelected("")
 		a.profileSelect.Refresh()
 	}
+	a.listSelectedIndex = -1
+	a.refreshProfileList()
+}
+
+// refreshProfileList refreshes the profile list widget if the profile
+// list window is currently open.
+func (a *App) refreshProfileList() {
+	if a.profileList != nil {
+		a.profileList.Refresh()
+	}
 }

 // profileNames returns the names of all loaded profiles.
@@ -154,39 +187,6 @@ func (a *App) onAddProfile() {
 	a.showProfileDialog(nil)
 }

-// onEditProfile shows a dialog to edit the current profile.
-func (a *App) onEditProfile() {
-	if a.currentProfile == nil {
-		dialog.NewCustom(i18n.T("DlgNoProfileTitle"), i18n.T("BtnOK"),
-			widget.NewLabel(i18n.T("DlgNoProfileEditMsg")), a.window).Show()
-		return
-	}
-	p := *a.currentProfile
-	a.showProfileDialog(&p)
-}
-
-// onDeleteProfile deletes the current profile after confirmation.
-func (a *App) onDeleteProfile() {
-	if a.currentProfile == nil {
-		return
-	}
-	name := a.currentProfile.Name
-	dialog.NewCustomConfirm(i18n.T("DlgDeleteProfileTitle"),
-		i18n.T("BtnDelete"), i18n.T("BtnCancel"),
-		widget.NewLabel(i18n.T("DlgDeleteProfileMsg", map[string]interface{}{"name": name})),
-		func(ok bool) {
-			if !ok {
-				return
-			}
-			if err := a.db.DeleteProfile(a.currentProfile.ID); err != nil {
-				showError(i18n.T("DlgError"), err.Error(), a.window)
-				return
-			}
-			_ = a.kc.DeleteAll(name)
-			a.loadProfiles()
-		}, a.window).Show()
-}
-
 // onResetDB deletes the SQLite database file after confirmation,
 // then re-creates it. All profiles, credentials, and logs are lost.
 func (a *App) onResetDB() {
@@ -231,14 +231,17 @@ func (a *App) onResetDB() {
 			// Reset UI state.
 			a.currentProfile = nil
 			a.loadProfiles()
-			a.stateLabel.SetText(i18n.T("StateDisconnected"))
-			a.ipLabel.SetText(i18n.T("IpNone"))
-			a.ip6Label.SetText(i18n.T("Ip6None"))
-			a.uptimeLabel.SetText(i18n.T("UptimeNone"))
-			a.rxLabel.SetText(i18n.T("RxZero"))
-			a.txLabel.SetText(i18n.T("TxZero"))
-			a.connectBtn.Enable()
-			a.disconnectBtn.Disable()
+		a.stateLabel.SetText(i18n.T("StateDisconnected"))
+		a.ipLabel.SetText(i18n.T("IpNone"))
+		a.ip6Label.SetText(i18n.T("Ip6None"))
+		a.uptimeLabel.SetText(i18n.T("UptimeNone"))
+		a.rxV4Label.SetText(i18n.T("RxV4Zero"))
+		a.txV4Label.SetText(i18n.T("TxV4Zero"))
+		a.rxV6Label.SetText(i18n.T("RxV6Zero"))
+		a.txV6Label.SetText(i18n.T("TxV6Zero"))
+		a.rxTotalLabel.SetText(i18n.T("RxTotalZero"))
+		a.txTotalLabel.SetText(i18n.T("TxTotalZero"))
+		a.setConnButtons(true, false)
 		}, a.window).Show()
 }

@@ -279,6 +282,12 @@ func (a *App) rebuildUI() {
 		selectedName = a.currentProfile.Name
 	}

+	// Close the profile list window if open; it holds cached strings
+	// and will be recreated with the new language on next open.
+	if a.profileListWindow != nil {
+		a.profileListWindow.Close()
+	}
+
 	// Rebuild window content (creates fresh widgets with new strings).
 	a.window.SetTitle(i18n.T("WindowTitle"))
 	a.window.SetContent(a.buildMainWindow())
@@ -299,12 +308,10 @@ func (a *App) rebuildUI() {

 	// Restore connection state.
 	if wasConnected {
-		a.connectBtn.Disable()
-		a.disconnectBtn.Enable()
+		a.setConnButtons(false, true)
 		a.stateLabel.SetText(i18n.T("StateConnected"))
 	} else {
-		a.connectBtn.Enable()
-		a.disconnectBtn.Disable()
+		a.setConnButtons(true, false)
 		a.stateLabel.SetText(i18n.T("StateDisconnected"))
 	}

@@ -3,13 +3,13 @@ package ui
 import (
 	"fmt"
 	"os"
-	"os/exec"
 	"path/filepath"
 	"time"

 	"lmvpn/internal/ipc"
 	"lmvpn/internal/log"
 	"lmvpn/internal/paths"
+	"lmvpn/internal/version"
 )

 // ensureDaemon checks if the daemon is running and launches it (as
@@ -25,9 +25,27 @@ import (
 // The --daemon-bin flag tells daemon-launch where to find lmvpnd. If
 // not given, daemon-launch auto-detects it relative to its own path.
 func ensureDaemon() (*ipc.Client, error) {
-	// Fast path: daemon already running.
+	// Fast path: a daemon is already running. Verify its build version
+	// matches ours; if not, it's a stale process from a previous build
+	// and must be restarted so the new code takes effect.
 	if c, err := ipc.Dial(); err == nil {
-		return c, nil
+		if ver, qerr := c.QueryVersion(); qerr == nil && ver == version.Version {
+			return c, nil
+		} else {
+			log.L().Info("stale daemon detected, restarting",
+				"got", ver, "expected", version.Version, "query_err", qerr)
+			_ = ipc.SendShutdown(c)
+			c.Close()
+			// Wait for the old daemon to exit and release the socket.
+			for i := 0; i < 30; i++ {
+				time.Sleep(100 * time.Millisecond)
+				if cc, err := ipc.Dial(); err == nil {
+					cc.Close()
+				} else {
+					break // socket gone
+				}
+			}
+		}
 	}

 	exe, err := os.Executable()
@@ -41,7 +59,7 @@ func ensureDaemon() (*ipc.Client, error) {
 	}

 	// Compute the daemon binary path: same directory as the GUI binary.
-	daemonBin := filepath.Join(filepath.Dir(exe), "lmvpnd")
+	daemonBin := filepath.Join(filepath.Dir(exe), daemonBinaryName)
 	if _, err := os.Stat(daemonBin); err != nil {
 		return nil, fmt.Errorf("daemon binary not found at %s: %w", daemonBin, err)
 	}
@@ -50,44 +68,23 @@ func ensureDaemon() (*ipc.Client, error) {
 	uid := os.Getuid()
 	gid := os.Getgid()

-	// Launch the daemon via osascript (prompts for admin password).
-	// The `daemon-launch` subcommand forks lmvpnd with Setsid and exits
-	// immediately, so osascript returns right away.
-	script := fmt.Sprintf(
-		`do shell script %q with administrator privileges`,
-		fmt.Sprintf("%s daemon-launch --user-home %s --uid %d --gid %d --daemon-bin %s",
-			shellQuote(exe), shellQuote(home), uid, gid, shellQuote(daemonBin)),
-	)
-	cmd := exec.Command("osascript", "-e", script)
-	if out, err := cmd.CombinedOutput(); err != nil {
-		return nil, fmt.Errorf("launch daemon: %w (output: %s)", err, string(out))
+	if err := launchElevated(exe, daemonBin, home, uid, gid); err != nil {
+		return nil, err
 	}
-	log.L().Info("daemon launched via osascript",
-		"uid", uid, "gid", gid, "home", home, "daemon_bin", daemonBin)

 	// Wait for the daemon to become reachable.
 	logFile := paths.DaemonLogFile()
-	for i := 0; i < 40; i++ {
+	for i := 0; i < 60; i++ {
 		time.Sleep(250 * time.Millisecond)
 		if c, err := ipc.Dial(); err == nil {
-			log.L().Info("daemon connected", "socket", paths.IPCSocketPath())
+			log.L().Info("daemon connected", "socket", paths.IPCAddress())
 			return c, nil
+		} else if i == 0 || i == 10 || i == 30 || i == 59 {
+			log.L().Warn("daemon not reachable yet, retrying",
+				"attempt", i+1, "socket", paths.IPCAddress(), "error", err)
 		}
 	}
 	return nil, fmt.Errorf("daemon did not become reachable (check %s)", logFile)
 }

-// shellQuote wraps a string in single quotes for shell safety.
-// Embedded single quotes are escaped using the '\'' pattern.
-func shellQuote(s string) string {
-	result := "'"
-	for _, r := range s {
-		if r == '\'' {
-			result += "'\\''"
-		} else {
-			result += string(r)
-		}
-	}
-	result += "'"
-	return result
-}
+
@@ -0,0 +1,44 @@
+//go:build darwin
+
+package ui
+
+import (
+	"fmt"
+	"os/exec"
+
+	"lmvpn/internal/log"
+)
+
+const daemonBinaryName = "lmvpnd"
+
+// launchElevated launches the daemon-launch subcommand with admin
+// privileges via osascript on macOS.
+func launchElevated(exe, daemonBin, home string, uid, gid int) error {
+	script := fmt.Sprintf(
+		`do shell script %q with administrator privileges`,
+		fmt.Sprintf("%s daemon-launch --user-home %s --uid %d --gid %d --daemon-bin %s",
+			shellQuote(exe), shellQuote(home), uid, gid, shellQuote(daemonBin)),
+	)
+	cmd := exec.Command("osascript", "-e", script)
+	if out, err := cmd.CombinedOutput(); err != nil {
+		return fmt.Errorf("launch daemon: %w (output: %s)", err, string(out))
+	}
+	log.L().Info("daemon launched via osascript",
+		"uid", uid, "gid", gid, "home", home, "daemon_bin", daemonBin)
+	return nil
+}
+
+// shellQuote wraps a string in single quotes for shell safety.
+// Embedded single quotes are escaped using the '\'' pattern.
+func shellQuote(s string) string {
+	result := "'"
+	for _, r := range s {
+		if r == '\'' {
+			result += "'\\''"
+		} else {
+			result += string(r)
+		}
+	}
+	result += "'"
+	return result
+}
@@ -0,0 +1,28 @@
+//go:build !darwin && !windows
+
+package ui
+
+import (
+	"fmt"
+	"os/exec"
+
+	"lmvpn/internal/log"
+)
+
+const daemonBinaryName = "lmvpnd"
+
+// launchElevated launches the daemon-launch subcommand with admin
+// privileges. On Linux, pkexec is used (common on desktop Linux).
+func launchElevated(exe, daemonBin, home string, uid, gid int) error {
+	cmd := exec.Command("pkexec", exe, "daemon-launch",
+		"--user-home", home,
+		"--uid", fmt.Sprintf("%d", uid),
+		"--gid", fmt.Sprintf("%d", gid),
+		"--daemon-bin", daemonBin)
+	if out, err := cmd.CombinedOutput(); err != nil {
+		return fmt.Errorf("launch daemon: %w (output: %s)", err, string(out))
+	}
+	log.L().Info("daemon launched via pkexec",
+		"uid", uid, "gid", gid, "home", home, "daemon_bin", daemonBin)
+	return nil
+}
@@ -0,0 +1,44 @@
+//go:build windows
+
+package ui
+
+import (
+	"fmt"
+	"syscall"
+	"unsafe"
+
+	"lmvpn/internal/log"
+)
+
+const daemonBinaryName = "lmvpnd.exe"
+
+// launchElevated launches the daemon-launch subcommand with UAC
+// elevation via ShellExecute "runas" on Windows.
+func launchElevated(exe, daemonBin, home string, uid, gid int) error {
+	args := fmt.Sprintf("daemon-launch --user-home \"%s\" --uid %d --gid %d --daemon-bin \"%s\"",
+		home, uid, gid, daemonBin)
+
+	shell32 := syscall.NewLazyDLL("shell32.dll")
+	proc := shell32.NewProc("ShellExecuteW")
+
+	verb, _ := syscall.UTF16PtrFromString("runas")
+	file, _ := syscall.UTF16PtrFromString(exe)
+	params, _ := syscall.UTF16PtrFromString(args)
+	dir, _ := syscall.UTF16PtrFromString("")
+
+	ret, _, err := proc.Call(
+		0,
+		uintptr(unsafe.Pointer(verb)),
+		uintptr(unsafe.Pointer(file)),
+		uintptr(unsafe.Pointer(params)),
+		uintptr(unsafe.Pointer(dir)),
+		1, // SW_SHOWNORMAL
+	)
+
+	if ret <= 32 {
+		return fmt.Errorf("UAC elevation failed (code %d): %w", ret, err)
+	}
+	log.L().Info("daemon launched via UAC",
+		"uid", uid, "gid", gid, "home", home, "daemon_bin", daemonBin)
+	return nil
+}
@@ -0,0 +1,3 @@
+<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 16 16" width="24" height="24">
+  <path fill="#24292f" d="M8 0C3.58 0 0 3.58 0 8c0 3.54 2.29 6.53 5.47 7.59.4.07.55-.17.55-.38 0-.19-.01-.82-.01-1.49-2.01.37-2.53-.49-2.69-.94-.09-.23-.48-.94-.82-1.13-.28-.15-.68-.52-.01-.53.63-.01 1.08.58 1.23.82.72 1.21 1.87.87 2.33.66.07-.52.28-.87.51-1.07-1.78-.2-3.64-.89-3.64-3.95 0-.87.31-1.59.82-2.15-.08-.2-.36-1.02.08-2.12 0 0 .67-.21 2.2.82.64-.18 1.32-.27 2-.27.68 0 1.36.09 2 .27 1.53-1.04 2.2-.82 2.2-.82.44 1.1.16 1.92.08 2.12.51.56.82 1.27.82 2.15 0 3.07-1.87 3.75-3.65 3.95.29.25.54.73.54 1.48 0 1.07-.01 1.93-.01 2.2 0 .21.15.46.55.38A8.012 8.012 0 0 0 16 8c0-4.42-3.58-8-8-8z"/>
+</svg>
@@ -1,6 +1,7 @@
 package ui

 import (
+	"fmt"
 	"strconv"

 	"lmvpn/internal/i18n"
@@ -8,6 +9,7 @@ import (

 	"fyne.io/fyne/v2"
 	"fyne.io/fyne/v2/container"
+	"fyne.io/fyne/v2/dialog"
 	"fyne.io/fyne/v2/widget"
 )

@@ -18,7 +20,7 @@ var (
 	authCodes  = []string{string(model.AuthModeBoth), string(model.AuthModeJWT), string(model.AuthModePassword)}
 	routeCodes = []string{string(model.RoutingFull), string(model.RoutingSplit), string(model.RoutingCustom)}

-	protoCodes  = []string{"wss", "ws"}
+	protoCodes = []string{"wss", "ws"}
 )

 func authModeLabels() []string {
@@ -106,6 +108,52 @@ func (a *App) showProfileDialog(editing *model.ServerProfile) {
 	mtuEntry.Scroll = container.ScrollNone
 	mtuEntry.SetPlaceHolder(i18n.T("PlaceholderMTU"))

+	tlsCaPEMEntry := widget.NewMultiLineEntry()
+	tlsCaPEMEntry.Wrapping = fyne.TextWrapOff
+	tlsCaPEMEntry.Scroll = container.ScrollNone
+	tlsCaPEMEntry.SetMinRowsVisible(4)
+	tlsCaPEMEntry.SetPlaceHolder(i18n.T("PlaceholderTLSCACert"))
+
+	tlsCaPathEntry := widget.NewEntry()
+	tlsCaPathEntry.Wrapping = fyne.TextWrapOff
+	tlsCaPathEntry.Scroll = container.ScrollNone
+	tlsCaPathEntry.SetPlaceHolder(i18n.T("PlaceholderTLSCAPath"))
+
+	tlsInsecureCheck := widget.NewCheck(i18n.T("FieldTLSInsecure"), nil)
+
+	tlsPinnedHashEntry := widget.NewEntry()
+	tlsPinnedHashEntry.Wrapping = fyne.TextWrapOff
+	tlsPinnedHashEntry.Scroll = container.ScrollNone
+	tlsPinnedHashEntry.SetPlaceHolder(i18n.T("PlaceholderTLSPinnedHash"))
+
+	var profileWin fyne.Window
+
+	browseBtn := widget.NewButton(i18n.T("BtnBrowse"), func() {
+		dialog.NewFileOpen(func(reader fyne.URIReadCloser, err error) {
+			if err != nil || reader == nil {
+				return
+			}
+			defer reader.Close()
+			tlsCaPathEntry.SetText(reader.URI().Path())
+		}, profileWin).Show()
+	})
+
+	setTLSEnabled := func(enabled bool) {
+		if enabled {
+			tlsCaPEMEntry.Enable()
+			tlsCaPathEntry.Enable()
+			browseBtn.Enable()
+			tlsInsecureCheck.Enable()
+			tlsPinnedHashEntry.Enable()
+		} else {
+			tlsCaPEMEntry.Disable()
+			tlsCaPathEntry.Disable()
+			browseBtn.Disable()
+			tlsInsecureCheck.Disable()
+			tlsPinnedHashEntry.Disable()
+		}
+	}
+
 	if !isNew {
 		nameEntry.SetText(editing.Name)
 		protoSelect.SetSelectedIndex(codeIndex(protoCodes, editing.Protocol))
@@ -120,6 +168,10 @@ func (a *App) showProfileDialog(editing *model.ServerProfile) {
 		routeSelect.SetSelectedIndex(codeIndex(routeCodes, string(editing.RoutingMode)))
 		cidrEntry.SetText(editing.CustomCIDRs)
 		mtuEntry.SetText(fmtInt(editing.MTUOverride))
+		tlsCaPEMEntry.SetText(editing.TLSCACert)
+		tlsCaPathEntry.SetText(editing.TLSCAPath)
+		tlsInsecureCheck.SetChecked(editing.TLSInsecure)
+		tlsPinnedHashEntry.SetText(editing.TLSPinnedHash)
 		passEntry.SetPlaceHolder(i18n.T("PlaceholderPasswordUnchanged"))
 	} else {
 		protoSelect.SetSelectedIndex(0) // wss
@@ -130,6 +182,11 @@ func (a *App) showProfileDialog(editing *model.ServerProfile) {
 		mtuEntry.SetText("0")
 	}

+	protoSelect.OnChanged = func(value string) {
+		setTLSEnabled(value == "wss")
+	}
+	setTLSEnabled(selectedCode(protoCodes, protoSelect.SelectedIndex()) == "wss")
+
 	form := container.NewVBox(
 		widget.NewLabel(i18n.T("FieldName")),
 		nameEntry,
@@ -157,9 +214,19 @@ func (a *App) showProfileDialog(editing *model.ServerProfile) {

 		widget.NewLabel(i18n.T("FieldCustomCIDRs")), cidrEntry,
 		widget.NewLabel(i18n.T("FieldMTUOverride")), mtuEntry,
+
+		widget.NewLabel(i18n.T("FieldTLS")),
+		widget.NewLabel(i18n.T("FieldTLSCAPath")),
+		container.NewBorder(nil, nil, nil, browseBtn, tlsCaPathEntry),
+		widget.NewLabel(i18n.T("FieldTLSCACert")),
+		tlsCaPEMEntry,
+		widget.NewLabel(i18n.T("HintTLSCAReplacesSystem")),
+		tlsInsecureCheck,
+		widget.NewLabel(i18n.T("FieldTLSPinnedHash")),
+		tlsPinnedHashEntry,
 	)

-	profileWin := a.fyneApp.NewWindow(i18n.T("DlgProfileTitle"))
+	profileWin = a.fyneApp.NewWindow(i18n.T("DlgProfileTitle"))
 	a.profileWindow = profileWin

 	profileWin.SetOnClosed(func() {
@@ -175,7 +242,10 @@ func (a *App) showProfileDialog(editing *model.ServerProfile) {
 			userEntry.Text, passEntry.Text,
 			selectedCode(authCodes, authSelect.SelectedIndex()),
 			selectedCode(routeCodes, routeSelect.SelectedIndex()),
-			cidrEntry.Text, mtuEntry.Text, isNew) {
+			cidrEntry.Text, mtuEntry.Text,
+			tlsCaPEMEntry.Text, tlsCaPathEntry.Text,
+			tlsPinnedHashEntry.Text, tlsInsecureCheck.Checked,
+			isNew) {
 			profileWin.Close()
 		}
 	})
@@ -186,14 +256,15 @@ func (a *App) showProfileDialog(editing *model.ServerProfile) {
 	})

 	profileWin.SetContent(container.NewBorder(nil, container.NewHBox(saveBtn, cancelBtn), nil, nil, container.NewVScroll(form)))
-	profileWin.Resize(fyne.NewSize(460, 560))
+	profileWin.Resize(fyne.NewSize(460, 760))
 	profileWin.Show()
 }

 // saveProfile creates or updates a profile and stores credentials.
 // Returns true on success, false if validation or DB operation failed.
 func (a *App) saveProfile(editing *model.ServerProfile,
-	name, protocol, host, ips, portStr, pathStr, user, password, authMode, routeMode, cidrs, mtuStr string, isNew bool) bool {
+	name, protocol, host, ips, portStr, pathStr, user, password, authMode, routeMode, cidrs, mtuStr,
+	tlsCaPEM, tlsCaPath, tlsPinnedHash string, tlsInsecure, isNew bool) bool {
 	if name == "" || host == "" || user == "" {
 		showError(i18n.T("DlgValidationTitle"), i18n.T("DlgValidationMsg"), a.window)
 		return false
@@ -204,17 +275,21 @@ func (a *App) saveProfile(editing *model.ServerProfile,

 	if isNew {
 		p := &model.ServerProfile{
-			Name:        name,
-			Protocol:    protocol,
-			Host:        host,
-			ServerIPs:   ips,
-			Port:        port,
-			Path:        pathStr,
-			Username:    user,
-			AuthMode:    model.AuthMode(authMode),
-			RoutingMode: model.RoutingMode(routeMode),
-			CustomCIDRs: cidrs,
-			MTUOverride: mtu,
+			Name:          name,
+			Protocol:      protocol,
+			Host:          host,
+			ServerIPs:     ips,
+			Port:          port,
+			Path:          pathStr,
+			Username:      user,
+			AuthMode:      model.AuthMode(authMode),
+			RoutingMode:   model.RoutingMode(routeMode),
+			CustomCIDRs:   cidrs,
+			MTUOverride:   mtu,
+			TLSCACert:     tlsCaPEM,
+			TLSCAPath:     tlsCaPath,
+			TLSInsecure:   tlsInsecure,
+			TLSPinnedHash: tlsPinnedHash,
 		}
 		id, err := a.db.CreateProfile(p)
 		if err != nil {
@@ -240,6 +315,10 @@ func (a *App) saveProfile(editing *model.ServerProfile,
 		editing.RoutingMode = model.RoutingMode(routeMode)
 		editing.CustomCIDRs = cidrs
 		editing.MTUOverride = mtu
+		editing.TLSCACert = tlsCaPEM
+		editing.TLSCAPath = tlsCaPath
+		editing.TLSInsecure = tlsInsecure
+		editing.TLSPinnedHash = tlsPinnedHash
 		if err := a.db.UpdateProfile(editing); err != nil {
 			showError(i18n.T("DlgSaveError"), err.Error(), a.window)
 			return false
@@ -267,3 +346,97 @@ func parseIntDefault(s string, def int) int {
 	}
 	return n
 }
+
+// showProfileListWindow opens a window listing all saved profiles with
+// buttons to add, edit, delete, and reset the database. Only one
+// instance is allowed; if already open it is brought to the front.
+func (a *App) showProfileListWindow() {
+	if a.profileListWindow != nil {
+		a.profileListWindow.RequestFocus()
+		return
+	}
+
+	a.profileList = widget.NewList(
+		func() int { return len(a.profiles) },
+		func() fyne.CanvasObject {
+			name := widget.NewLabel("")
+			name.TextStyle = fyne.TextStyle{Bold: true}
+			host := widget.NewLabel("")
+			return container.NewVBox(name, host)
+		},
+		func(id widget.ListItemID, obj fyne.CanvasObject) {
+			box := obj.(*fyne.Container)
+			nameLbl := box.Objects[0].(*widget.Label)
+			hostLbl := box.Objects[1].(*widget.Label)
+			if id >= 0 && id < len(a.profiles) {
+				p := a.profiles[id]
+				nameLbl.SetText(p.Name)
+				hostLbl.SetText(fmt.Sprintf("%s:%d", p.Host, p.Port))
+			}
+		},
+	)
+	a.profileList.OnSelected = func(id widget.ListItemID) {
+		a.listSelectedIndex = id
+	}
+	a.profileList.OnUnselected = func(_ widget.ListItemID) {
+		a.listSelectedIndex = -1
+	}
+
+	addBtn := widget.NewButton(i18n.T("BtnAddProfile"), a.onAddProfile)
+	editBtn := widget.NewButton(i18n.T("BtnEdit"), a.onEditProfileFromList)
+	deleteBtn := widget.NewButton(i18n.T("BtnDelete"), a.onDeleteProfileFromList)
+	resetDBBtn := widget.NewButton(i18n.T("BtnResetDB"), a.onResetDB)
+
+	buttons := container.NewGridWithColumns(4, addBtn, editBtn, deleteBtn, resetDBBtn)
+
+	win := a.fyneApp.NewWindow(i18n.T("ProfileListTitle"))
+	a.profileListWindow = win
+	win.SetOnClosed(func() {
+		a.profileListWindow = nil
+		a.profileList = nil
+		a.listSelectedIndex = -1
+	})
+
+	win.SetContent(container.NewBorder(nil, buttons, nil, nil, a.profileList))
+	win.Resize(fyne.NewSize(460, 400))
+	win.Show()
+}
+
+// onEditProfileFromList opens the profile editor for the profile
+// selected in the list window.
+func (a *App) onEditProfileFromList() {
+	idx := a.listSelectedIndex
+	if idx < 0 || idx >= len(a.profiles) {
+		dialog.NewCustom(i18n.T("DlgNoListSelectTitle"), i18n.T("BtnOK"),
+			widget.NewLabel(i18n.T("DlgNoListSelectEditMsg")), a.profileListWindow).Show()
+		return
+	}
+	p := a.profiles[idx]
+	a.showProfileDialog(&p)
+}
+
+// onDeleteProfileFromList deletes the profile selected in the list
+// window after confirmation.
+func (a *App) onDeleteProfileFromList() {
+	idx := a.listSelectedIndex
+	if idx < 0 || idx >= len(a.profiles) {
+		dialog.NewCustom(i18n.T("DlgNoListSelectTitle"), i18n.T("BtnOK"),
+			widget.NewLabel(i18n.T("DlgNoListSelectDeleteMsg")), a.profileListWindow).Show()
+		return
+	}
+	p := a.profiles[idx]
+	dialog.NewCustomConfirm(i18n.T("DlgDeleteProfileTitle"),
+		i18n.T("BtnDelete"), i18n.T("BtnCancel"),
+		widget.NewLabel(i18n.T("DlgDeleteProfileMsg", map[string]interface{}{"name": p.Name})),
+		func(ok bool) {
+			if !ok {
+				return
+			}
+			if err := a.db.DeleteProfile(p.ID); err != nil {
+				showError(i18n.T("DlgError"), err.Error(), a.profileListWindow)
+				return
+			}
+			_ = a.kc.DeleteAll(p.Name)
+			a.loadProfiles()
+		}, a.profileListWindow).Show()
+}
@@ -46,24 +46,33 @@ func (a *App) setupTray() {
 		autoItem, enItem, zhItem,
 	)

-	menu := fyne.NewMenu(i18n.T("WindowTitle"),
-		fyne.NewMenuItem(i18n.T("TrayShowWindow"), func() {
-			showDockIcon()
-			a.window.Show()
-			a.window.RequestFocus()
-		}),
-		fyne.NewMenuItemSeparator(),
-		fyne.NewMenuItem(i18n.T("TrayConnect"), func() {
+		connectItem := fyne.NewMenuItem(i18n.T("TrayConnect"), func() {
 			a.onConnect()
-		}),
-		fyne.NewMenuItem(i18n.T("TrayDisconnect"), func() {
+		})
+		disconnectItem := fyne.NewMenuItem(i18n.T("TrayDisconnect"), func() {
 			a.onDisconnect()
-		}),
+		})
+		if a.connectBtn != nil {
+			connectItem.Disabled = a.connectBtn.Disabled()
+		}
+		if a.disconnectBtn != nil {
+			disconnectItem.Disabled = a.disconnectBtn.Disabled()
+		}
+
+		menu := fyne.NewMenu(i18n.T("WindowTitle"),
+			fyne.NewMenuItem(i18n.T("TrayShowWindow"), func() {
+				showDockIcon()
+				a.window.Show()
+				a.window.RequestFocus()
+			}),
+			fyne.NewMenuItemSeparator(),
+			connectItem,
+			disconnectItem,
 		fyne.NewMenuItemSeparator(),
 		langItem,
 		fyne.NewMenuItemSeparator(),
 		fyne.NewMenuItem(i18n.T("TrayQuit"), func() {
-			a.fyneApp.Quit()
+			a.quit()
 		}),
 	)
 	deskApp.SetSystemTrayMenu(menu)
@@ -1,3 +1,7 @@
 package ui

-var Version = "dev"
+import "lmvpn/internal/version"
+
+// Version is the application version, sourced from the shared version
+// package so the GUI and daemon report the same string.
+var Version = version.Version
@@ -1,7 +1,9 @@
 package ui

 import (
+	_ "embed"
 	"fmt"
+	"net/url"
 	"time"

 	"lmvpn/internal/i18n"
@@ -11,14 +13,42 @@ import (
 	"fyne.io/fyne/v2"
 	"fyne.io/fyne/v2/container"
 	"fyne.io/fyne/v2/dialog"
+	"fyne.io/fyne/v2/layout"
+	"fyne.io/fyne/v2/theme"
 	"fyne.io/fyne/v2/widget"
 )

+//go:embed github.svg
+var githubIconBytes []byte
+
 // showError displays a titled error dialog.
 func showError(title, message string, parent fyne.Window) {
 	dialog.NewCustom(title, i18n.T("BtnOK"), widget.NewLabel(message), parent).Show()
 }

+// setConnButtons enables/disables the connect and disconnect buttons
+// and refreshes the tray menu to match.
+func (a *App) setConnButtons(connectEnabled, disconnectEnabled bool) {
+	if connectEnabled {
+		a.connectBtn.Enable()
+	} else {
+		a.connectBtn.Disable()
+	}
+	if disconnectEnabled {
+		a.disconnectBtn.Enable()
+	} else {
+		a.disconnectBtn.Disable()
+	}
+	if a.profileSelect != nil {
+		if connectEnabled {
+			a.profileSelect.Enable()
+		} else {
+			a.profileSelect.Disable()
+		}
+	}
+	a.setupTray()
+}
+
 // buildMainWindow creates the main application window layout.
 func (a *App) buildMainWindow() fyne.CanvasObject {
 	// Profile selector.
@@ -32,15 +62,21 @@ func (a *App) buildMainWindow() fyne.CanvasObject {
 	a.ipLabel = widget.NewLabel(i18n.T("IpNone"))
 	a.ip6Label = widget.NewLabel(i18n.T("Ip6None"))
 	a.uptimeLabel = widget.NewLabel(i18n.T("UptimeNone"))
-	a.rxLabel = widget.NewLabel(i18n.T("RxZero"))
-	a.txLabel = widget.NewLabel(i18n.T("TxZero"))
+	a.rxV4Label = widget.NewLabel(i18n.T("RxV4Zero"))
+	a.txV4Label = widget.NewLabel(i18n.T("TxV4Zero"))
+	a.rxV6Label = widget.NewLabel(i18n.T("RxV6Zero"))
+	a.txV6Label = widget.NewLabel(i18n.T("TxV6Zero"))
+	a.rxTotalLabel = widget.NewLabel(i18n.T("RxTotalZero"))
+	a.txTotalLabel = widget.NewLabel(i18n.T("TxTotalZero"))

 	statusCard := widget.NewCard(i18n.T("StatusLabel"), "", container.NewVBox(
 		a.stateLabel,
 		a.ipLabel,
 		a.ip6Label,
 		a.uptimeLabel,
-		container.NewHBox(a.rxLabel, a.txLabel),
+		container.NewHBox(a.rxV4Label, a.txV4Label),
+		container.NewHBox(a.rxV6Label, a.txV6Label),
+		container.NewHBox(a.rxTotalLabel, a.txTotalLabel),
 	))

 	// Buttons.
@@ -49,28 +85,35 @@ func (a *App) buildMainWindow() fyne.CanvasObject {
 	a.disconnectBtn = widget.NewButton(i18n.T("BtnDisconnect"), a.onDisconnect)
 	a.disconnectBtn.Disable()

-	addBtn := widget.NewButton(i18n.T("BtnAddProfile"), a.onAddProfile)
-	editBtn := widget.NewButton(i18n.T("BtnEdit"), a.onEditProfile)
-	deleteBtn := widget.NewButton(i18n.T("BtnDelete"), a.onDeleteProfile)
-
-	resetDBBtn := widget.NewButton(i18n.T("BtnResetDB"), a.onResetDB)
+	profileListBtn := widget.NewButton(i18n.T("BtnProfileList"), a.showProfileListWindow)

 	buttons := container.NewGridWithColumns(2,
 		a.connectBtn, a.disconnectBtn,
 	)
-	profileButtons := container.NewGridWithColumns(3,
-		addBtn, editBtn, deleteBtn,
-	)

-	return container.NewVBox(
+	githubBtn := widget.NewButtonWithIcon("", theme.NewThemedResource(fyne.NewStaticResource("github.svg", githubIconBytes)), func() {
+		u, err := url.Parse("https://github.com/wuwenfengmi1998/lmvpn_client")
+		if err != nil {
+			return
+		}
+		_ = a.fyneApp.OpenURL(u)
+	})
+
+	content := container.NewVBox(
 		widget.NewLabel(i18n.T("ProfileLabel")),
 		a.profileSelect,
 		buttons,
-		profileButtons,
-		resetDBBtn,
+		profileListBtn,
 		statusCard,
-		widget.NewLabel(fmt.Sprintf("v%s", Version)),
 	)
+
+	bottomBar := container.NewHBox(
+		widget.NewLabel(fmt.Sprintf("v%s", Version)),
+		layout.NewSpacer(),
+		githubBtn,
+	)
+
+	return container.NewBorder(nil, bottomBar, nil, nil, content)
 }

 // onConnect handles the Connect button click.
@@ -80,8 +123,7 @@ func (a *App) onConnect() {
 		return
 	}

-	a.connectBtn.Disable()
-	a.disconnectBtn.Enable()
+	a.setConnButtons(false, true)
 	a.stateLabel.SetText(i18n.T("StateConnecting"))

 	go func() {
@@ -91,15 +133,19 @@ func (a *App) onConnect() {
 			fyne.Do(func() {
 				showError(i18n.T("DlgDaemonError"), err.Error(), a.window)
 				a.stateLabel.SetText(i18n.T("StateDisconnected"))
-				a.connectBtn.Enable()
-				a.disconnectBtn.Disable()
+				a.setConnButtons(true, false)
 			})
 			return
 		}

 		a.mu.Lock()
+		oldClient := a.ipcClient
 		a.ipcClient = client
 		a.mu.Unlock()
+		if oldClient != nil {
+			_ = ipc.SendStop(oldClient)
+			oldClient.Close()
+		}

 		// Get password from keychain.
 		password, err := a.kc.GetPassword(a.currentProfile.Name)
@@ -109,8 +155,7 @@ func (a *App) onConnect() {
 					i18n.T("DlgCredentialErrorMsg"),
 					a.window)
 				a.stateLabel.SetText(i18n.T("StateDisconnected"))
-				a.connectBtn.Enable()
-				a.disconnectBtn.Disable()
+				a.setConnButtons(true, false)
 			})
 			return
 		}
@@ -125,22 +170,25 @@ func (a *App) onConnect() {

 		// Build and send the start command.
 		cfg := ipc.ClientConfig{
-			ServerURL:   serverURL,
-			SNIHost:     sniHost,
-			ServerIPs:   serverIPs,
-			Username:    p.Username,
-			Password:    password,
-			AuthMode:    string(p.AuthMode),
-			RoutingMode: string(p.RoutingMode),
-			CustomCIDRs: splitCIDRs(p.CustomCIDRs),
-			MTUOverride: p.MTUOverride,
+			ServerURL:     serverURL,
+			SNIHost:       sniHost,
+			ServerIPs:     serverIPs,
+			Username:      p.Username,
+			Password:      password,
+			AuthMode:      string(p.AuthMode),
+			RoutingMode:   string(p.RoutingMode),
+			CustomCIDRs:   splitCIDRs(p.CustomCIDRs),
+			MTUOverride:   p.MTUOverride,
+			TLSCACert:     p.TLSCACert,
+			TLSCAPath:     p.TLSCAPath,
+			TLSInsecure:   p.TLSInsecure,
+			TLSPinnedHash: p.TLSPinnedHash,
 		}
 		if err := ipc.SendStart(client, cfg); err != nil {
 			fyne.Do(func() {
 				showError(i18n.T("DlgIPCError"), err.Error(), a.window)
 				a.stateLabel.SetText(i18n.T("StateDisconnected"))
-				a.connectBtn.Enable()
-				a.disconnectBtn.Disable()
+				a.setConnButtons(true, false)
 			})
 			return
 		}
@@ -154,14 +202,24 @@ func (a *App) onConnect() {
 func (a *App) onDisconnect() {
 	a.mu.Lock()
 	client := a.ipcClient
+	a.ipcClient = nil
 	a.mu.Unlock()
 	if client == nil {
 		return
 	}
 	_ = ipc.SendStop(client)
-	a.disconnectBtn.Disable()
-	a.connectBtn.Enable()
+	client.Close()
+	a.setConnButtons(true, false)
 	a.stateLabel.SetText(i18n.T("StateDisconnected"))
+	a.ipLabel.SetText(i18n.T("IpNone"))
+	a.ip6Label.SetText(i18n.T("Ip6None"))
+	a.uptimeLabel.SetText(i18n.T("UptimeNone"))
+	a.rxV4Label.SetText(i18n.T("RxV4Zero"))
+	a.txV4Label.SetText(i18n.T("TxV4Zero"))
+	a.rxV6Label.SetText(i18n.T("RxV6Zero"))
+	a.txV6Label.SetText(i18n.T("TxV6Zero"))
+	a.rxTotalLabel.SetText(i18n.T("RxTotalZero"))
+	a.txTotalLabel.SetText(i18n.T("TxTotalZero"))
 }

 // eventLoop reads IPC events from the daemon and updates the UI.
@@ -185,10 +243,13 @@ func (a *App) eventLoop() {
 					a.ipLabel.SetText(i18n.T("IpNone"))
 					a.ip6Label.SetText(i18n.T("Ip6None"))
 					a.uptimeLabel.SetText(i18n.T("UptimeNone"))
-					a.rxLabel.SetText(i18n.T("RxZero"))
-					a.txLabel.SetText(i18n.T("TxZero"))
-					a.connectBtn.Enable()
-					a.disconnectBtn.Disable()
+					a.rxV4Label.SetText(i18n.T("RxV4Zero"))
+					a.txV4Label.SetText(i18n.T("TxV4Zero"))
+					a.rxV6Label.SetText(i18n.T("RxV6Zero"))
+					a.txV6Label.SetText(i18n.T("TxV6Zero"))
+					a.rxTotalLabel.SetText(i18n.T("RxTotalZero"))
+					a.txTotalLabel.SetText(i18n.T("TxTotalZero"))
+					a.setConnButtons(true, false)
 				}
 			})
 			return
@@ -196,50 +257,87 @@ func (a *App) eventLoop() {
 		switch ev.Event {
 		case ipc.EvState:
 			fyne.Do(func() {
-				a.applyState(ev.State)
+				a.mu.Lock()
+				current := a.ipcClient
+				a.mu.Unlock()
+				if current == client {
+					a.applyState(ev.State)
+				}
 			})
 		case ipc.EvStats:
 			if ev.Stats != nil {
 				s := *ev.Stats
 				fyne.Do(func() {
-					a.applyStats(s)
+					a.mu.Lock()
+					current := a.ipcClient
+					a.mu.Unlock()
+					if current == client {
+						a.applyStats(s)
+					}
 				})
 			}
 		case ipc.EvError:
 			fyne.Do(func() {
-				if ev.Message != "" {
-					showError(i18n.T("DlgVPNError"), ev.Message, a.window)
+				a.mu.Lock()
+				current := a.ipcClient
+				a.mu.Unlock()
+				if current != client {
+					return
+				}
+				if ev.Code == "tls_error" {
+					showError(i18n.T("DlgTLSError"),
+						i18n.T("TLSErrorVerification")+"\n\n"+ev.Message, a.window)
+				} else {
+					msg := authErrorMessage(ev.Code, ev.Message)
+					if msg != "" {
+						showError(i18n.T("DlgAuthError"), msg, a.window)
+					}
 				}
 			})
 		}
 	}
 }

+// authErrorMessage maps a stable auth-error code (carried by the EvError
+// IPC event from the daemon) to a localized user-facing string. For an
+// unknown or empty code it falls back to the raw server message.
+func authErrorMessage(code, fallback string) string {
+	switch code {
+	case "wrong_credentials":
+		return i18n.T("AuthErrWrongCredentials")
+	case "user_disabled":
+		return i18n.T("AuthErrUserDisabled")
+	case "token_invalid":
+		return i18n.T("AuthErrTokenInvalid")
+	case "rate_limited":
+		return i18n.T("AuthErrRateLimited")
+	case "malformed":
+		return i18n.T("AuthErrMalformed")
+	default:
+		return fallback
+	}
+}
+
 // applyState updates UI elements for a state change.
 func (a *App) applyState(state string) {
 	switch stats.State(state) {
 	case stats.StateConnected:
 		a.stateLabel.SetText(i18n.T("StateConnected"))
-		a.connectBtn.Disable()
-		a.disconnectBtn.Enable()
+		a.setConnButtons(false, true)
 	case stats.StateConnecting:
 		a.stateLabel.SetText(i18n.T("StateConnecting"))
-		a.connectBtn.Disable()
-		a.disconnectBtn.Enable()
+		a.setConnButtons(false, true)
 	case stats.StateReconnecting:
 		a.stateLabel.SetText(i18n.T("StateReconnecting"))
-		a.connectBtn.Disable()
-		a.disconnectBtn.Enable()
+		a.setConnButtons(false, true)
 	case stats.StateDisconnected:
 		a.stateLabel.SetText(i18n.T("StateDisconnected"))
 		a.ipLabel.SetText(i18n.T("IpNone"))
 		a.ip6Label.SetText(i18n.T("Ip6None"))
-		a.connectBtn.Enable()
-		a.disconnectBtn.Disable()
+		a.setConnButtons(true, false)
 	case stats.StateError:
 		a.stateLabel.SetText(i18n.T("StateError"))
-		a.connectBtn.Enable()
-		a.disconnectBtn.Disable()
+		a.setConnButtons(true, false)
 	}
 }

@@ -256,8 +354,24 @@ func (a *App) applyStats(s stats.Snapshot) {
 	if s.State == stats.StateConnected {
 		a.stateLabel.SetText(i18n.T("StateConnected"))
 	}
-	a.rxLabel.SetText(i18n.T("RxLabel", map[string]interface{}{"bytes": formatBytes(s.RxBytes)}))
-	a.txLabel.SetText(i18n.T("TxLabel", map[string]interface{}{"bytes": formatBytes(s.TxBytes)}))
+	a.rxV4Label.SetText(i18n.T("RxV4Label", map[string]interface{}{
+		"bytes": formatBytes(s.RxBytesV4), "speed": formatSpeed(s.RxSpeedV4),
+	}))
+	a.txV4Label.SetText(i18n.T("TxV4Label", map[string]interface{}{
+		"bytes": formatBytes(s.TxBytesV4), "speed": formatSpeed(s.TxSpeedV4),
+	}))
+	a.rxV6Label.SetText(i18n.T("RxV6Label", map[string]interface{}{
+		"bytes": formatBytes(s.RxBytesV6), "speed": formatSpeed(s.RxSpeedV6),
+	}))
+	a.txV6Label.SetText(i18n.T("TxV6Label", map[string]interface{}{
+		"bytes": formatBytes(s.TxBytesV6), "speed": formatSpeed(s.TxSpeedV6),
+	}))
+	a.rxTotalLabel.SetText(i18n.T("RxTotalLabel", map[string]interface{}{
+		"bytes": formatBytes(s.RxBytes), "speed": formatSpeed(s.RxSpeed),
+	}))
+	a.txTotalLabel.SetText(i18n.T("TxTotalLabel", map[string]interface{}{
+		"bytes": formatBytes(s.TxBytes), "speed": formatSpeed(s.TxSpeed),
+	}))
 	if s.Uptime > 0 {
 		a.uptimeLabel.SetText(i18n.T("UptimeLabel", map[string]interface{}{"uptime": formatDuration(s.Uptime)}))
 	}
@@ -277,6 +391,23 @@ func formatBytes(b int64) string {
 	return fmt.Sprintf("%.1f %ciB", float64(b)/float64(div), "KMGTPE"[exp])
 }

+// formatSpeed formats a bytes/sec rate as a decimal bits/sec rate
+// (kbps / Mbps / Gbps). bps is the byte rate; it is converted to bits
+// by multiplying by 8 and scaled by 1000 (decimal, network convention).
+func formatSpeed(bps int64) string {
+	const unit = 1000
+	bits := bps * 8
+	if bits < unit {
+		return fmt.Sprintf("%d bps", bits)
+	}
+	div, exp := int64(unit), 0
+	for n := bits / unit; n >= unit; n /= unit {
+		div *= unit
+		exp++
+	}
+	return fmt.Sprintf("%.1f %cbps", float64(bits)/float64(div), "kMGTPE"[exp])
+}
+
 // formatDuration formats an uptime duration.
 func formatDuration(d time.Duration) string {
 	d = d.Round(time.Second)
@@ -0,0 +1,15 @@
+// Package version holds the build version string shared by the GUI
+// (lmvpn) and daemon (lmvpnd) binaries. The value is injected at link
+// time via ldflags:
+//
+//	-X lmvpn/internal/version.Version=$(VERSION)
+//
+// Both binaries are built with the same LDFLAGS, so a version mismatch
+// between the running daemon and the GUI indicates a stale daemon
+// process that predates the current build.
+package version
+
+// Version is the application version. Overridden at link time; "dev"
+// when running an untagged build (e.g. go run / go build without
+// ldflags).
+var Version = "dev"
@@ -9,9 +9,12 @@ package vpn

 import (
 	"context"
+	"crypto/tls"
 	"errors"
 	"fmt"
 	"net"
+	"net/http"
+	"strings"
 	"sync"
 	"time"

@@ -21,6 +24,7 @@ import (
 	"lmvpn/internal/protocol"
 	"lmvpn/internal/route"
 	"lmvpn/internal/stats"
+	"lmvpn/internal/tlsconfig"
 	"lmvpn/internal/transport"
 	"lmvpn/internal/tun"
 )
@@ -37,6 +41,10 @@ type SessionConfig struct {
 	RoutingMode route.Mode
 	CustomCIDRs []string
 	MTUOverride int // 0 = use server MTU
+	TLSCACert     string // inline CA cert PEM (wss only)
+	TLSCAPath     string // CA cert file path (wss only)
+	TLSInsecure   bool   // skip cert verification (wss only)
+	TLSPinnedHash string // SHA-256 cert pin (wss only)
 }

 // SessionManager manages a single VPN session with auto-reconnect.
@@ -44,6 +52,7 @@ type SessionManager struct {
 	stats   *stats.Stats
 	onState func(stats.State)
 	onStats func(stats.Snapshot)
+	onError func(code string, msg string)

 	mu       sync.Mutex
 	running  bool
@@ -51,16 +60,32 @@ type SessionManager struct {
 	dev      tun.Device
 	routeMgr *route.Manager
 	conn     *transport.Conn
+	done     chan struct{}
+
+	// EWMA speed smoothing state. Only touched by reportStats (single
+	// goroutine), so no lock needed. ewma* fields hold the smoothed
+	// bytes/sec; prev* hold the last snapshot's cumulative counters and
+	// tick time for delta computation.
+	ewmaRxV4   float64
+	ewmaTxV4   float64
+	ewmaRxV6   float64
+	ewmaTxV6   float64
+	prevSnap   stats.Snapshot
+	prevTick   time.Time
+	speedReady bool
 }

 // New creates a SessionManager. The onState callback (if non-nil) is
 // invoked on every state transition. The onStats callback (if non-nil)
-// is invoked periodically while connected.
-func New(onState func(stats.State), onStats func(stats.Snapshot)) *SessionManager {
+// is invoked periodically while connected. The onError callback (if
+// non-nil) is invoked once when a fatal, non-retryable error (such as
+// an authentication failure) terminates the session.
+func New(onState func(stats.State), onStats func(stats.Snapshot), onError func(string, string)) *SessionManager {
 	return &SessionManager{
 		stats:   stats.New(),
 		onState: onState,
 		onStats: onStats,
+		onError: onError,
 	}
 }

@@ -82,6 +107,7 @@ func (sm *SessionManager) Connect(ctx context.Context, cfg SessionConfig) error
 	ctx, cancel := context.WithCancel(ctx)
 	sm.cancel = cancel
 	sm.running = true
+	sm.done = make(chan struct{})
 	sm.mu.Unlock()

 	go sm.run(ctx, cfg)
@@ -102,19 +128,35 @@ func (sm *SessionManager) Disconnect() {
 	if cancel != nil {
 		cancel()
 	}
-	// Close the transport to unblock the packet pump.
+	// Close the transport to unblock the WS->TUN goroutine.
 	sm.mu.Lock()
 	conn := sm.conn
+	dev := sm.dev
 	sm.mu.Unlock()
 	if conn != nil {
 		conn.Close()
 	}
+	// Close the TUN device to unblock the TUN->WS goroutine's dev.Read().
+	if dev != nil {
+		dev.Close()
+	}
+	// Wait for the run goroutine to fully exit so that cleanup
+	// (route removal, TUN teardown) is complete before returning.
+	if sm.done != nil {
+		<-sm.done
+	}
 }

 // run is the main session loop with exponential-backoff reconnection
 // and CDN IP failover.
 func (sm *SessionManager) run(ctx context.Context, cfg SessionConfig) {
-	defer sm.setState(stats.StateDisconnected)
+	fatal := false
+	defer close(sm.done)
+	defer func() {
+		if !fatal && ctx.Err() == nil {
+			sm.setState(stats.StateDisconnected)
+		}
+	}()

 	backoff := time.Second
 	maxBackoff := 60 * time.Second
@@ -125,6 +167,7 @@ func (sm *SessionManager) run(ctx context.Context, cfg SessionConfig) {

 	for {
 		if ctx.Err() != nil {
+			sm.cleanup()
 			return
 		}

@@ -141,6 +184,36 @@ func (sm *SessionManager) run(ctx context.Context, cfg SessionConfig) {

 		if err != nil {
 			log.L().Error("VPN connection failed", "error", err)
+
+			// A TLS certificate verification failure is not retryable:
+			// the cert won't change between attempts, so stop the
+			// loop and surface the reason to the user.
+			if tlsconfig.IsTLSError(err) {
+				log.L().Warn("fatal TLS error, stopping reconnect", "error", err)
+				sm.setState(stats.StateError)
+				if sm.onError != nil {
+					sm.onError("tls_error", err.Error())
+				}
+				fatal = true
+				sm.cleanup()
+				return
+			}
+
+			// A fatal authentication failure (wrong password, disabled
+			// account, expired token, rate limit) is not retryable:
+			// stop the loop and surface the reason to the user instead
+			// of hammering the server forever.
+			if code, msg, isFatal := fatalAuthError(err); isFatal {
+				log.L().Warn("fatal auth error, stopping reconnect", "code", code, "message", msg)
+				sm.setState(stats.StateError)
+				if sm.onError != nil {
+					sm.onError(string(code), msg)
+				}
+				fatal = true
+				sm.cleanup()
+				return
+			}
+
 			sm.setState(stats.StateReconnecting)

 			// Try next CDN IP immediately.
@@ -169,6 +242,41 @@ func (sm *SessionManager) run(ctx context.Context, cfg SessionConfig) {
 	}
 }

+// fatalAuthError inspects err and, if it represents a permanent
+// authentication failure that should not be retried, returns the
+// stable error code, the raw server message, and true. It recognises
+// all three auth-failure shapes produced by the transport/auth layers:
+//   - *transport.AuthError        (WebSocket auth_err at the auth stage)
+//   - *transport.ServerError      (auth_err at the init stage, JWT path)
+//   - *auth.LoginError            (HTTP /api/login failure, JWT path)
+//
+// errors.As transparently unwraps fmt.Errorf("...: %w", err) chains,
+// so the wrapped LoginError returned by connectOnce is matched too.
+// A non-empty code is required: an auth_err with an unrecognized
+// message is treated as non-fatal so the loop falls back to retrying
+// (the server still closed the connection, but we lack a categorical
+// reason to give up).
+func fatalAuthError(err error) (protocol.AuthErrorCode, string, bool) {
+	var authErr *transport.AuthError
+	if errors.As(err, &authErr) {
+		return authErr.Code, authErr.Message, authErr.Code != ""
+	}
+	var serverErr *transport.ServerError
+	if errors.As(err, &serverErr) && serverErr.Type == protocol.TypeAuthErr {
+		return serverErr.Code, serverErr.Message, serverErr.Code != ""
+	}
+	var loginErr *auth.LoginError
+	if errors.As(err, &loginErr) {
+		switch loginErr.Code {
+		case http.StatusTooManyRequests:
+			return protocol.AuthCodeRateLimited, loginErr.Message, true
+		case http.StatusUnauthorized, http.StatusForbidden:
+			return protocol.AuthCodeWrongCredentials, loginErr.Message, true
+		}
+	}
+	return "", "", false
+}
+
 // connectOnce performs a single connection lifecycle: authenticate,
 // handshake, configure TUN, apply routes, pump packets until failure.
 func (sm *SessionManager) connectOnce(ctx context.Context, cfg SessionConfig, targetIP string) error {
@@ -181,6 +289,28 @@ func (sm *SessionManager) connectOnce(ctx context.Context, cfg SessionConfig, ta
 		serverURL = replaceHost(cfg.ServerURL, targetIP)
 	}

+	// Build TLS config for wss:// connections. For ws:// there is no
+	// TLS layer, so tlsCfg remains nil and both the HTTP client and
+	// the WebSocket dialer use their default (plaintext) behaviour.
+	var tlsCfg *tls.Config
+	if strings.HasPrefix(serverURL, "wss://") {
+		serverName := cfg.SNIHost
+		if serverName == "" {
+			serverName = serverHostFromURL(cfg.ServerURL)
+		}
+		var err error
+		tlsCfg, err = tlsconfig.Build(tlsconfig.Config{
+			ServerName:         serverName,
+			CACertPEM:          cfg.TLSCACert,
+			CACertPath:         cfg.TLSCAPath,
+			InsecureSkipVerify: cfg.TLSInsecure,
+			PinnedCertHash:     cfg.TLSPinnedHash,
+		})
+		if err != nil {
+			return fmt.Errorf("tls config: %w", err)
+		}
+	}
+
 	// Determine auth strategy and obtain JWT if needed.
 	token := cfg.Token
 	if token == "" && (cfg.AuthMode == model.AuthModeJWT || cfg.AuthMode == model.AuthModeBoth) {
@@ -188,7 +318,7 @@ func (sm *SessionManager) connectOnce(ctx context.Context, cfg SessionConfig, ta
 		if err != nil {
 			return fmt.Errorf("parse server URL: %w", err)
 		}
-		result, err := auth.Login(httpBase, cfg.Username, cfg.Password)
+		result, err := auth.Login(httpBase, cfg.Username, cfg.Password, tlsCfg)
 		if err != nil {
 			if cfg.AuthMode == model.AuthModeBoth {
 				// Fall back to password auth.
@@ -212,6 +342,7 @@ func (sm *SessionManager) connectOnce(ctx context.Context, cfg SessionConfig, ta
 		OnInit: func(init protocol.InitMessage) error {
 			return sm.setupTUN(init, cfg)
 		},
+		TLSConfig: tlsCfg,
 	}

 	// Attempt JWT connection first; fall back to password on auth error.
@@ -359,7 +490,7 @@ func (sm *SessionManager) pumpPackets(ctx context.Context, conn *transport.Conn)
 				}
 				return
 			}
-			sm.stats.TxBytes.Add(int64(n))
+			sm.stats.AddTx(buf[:n])
 		}
 	}()

@@ -386,7 +517,7 @@ func (sm *SessionManager) pumpPackets(ctx context.Context, conn *transport.Conn)
 				conn.Close()
 				return
 			}
-			sm.stats.RxBytes.Add(int64(len(data)))
+			sm.stats.AddRx(data)
 		}
 	}()

@@ -446,9 +577,15 @@ func (sm *SessionManager) setState(s stats.State) {
 }

 // reportStats periodically calls the onStats callback while connected.
+// On each tick it derives per-family speeds (bytes/sec) from the
+// delta between the current and previous cumulative counters, then
+// applies EWMA smoothing (0.7 old + 0.3 new) so the displayed rates
+// don't jitter. The combined speeds are the sum of the per-family
+// smoothed values.
 func (sm *SessionManager) reportStats(done <-chan struct{}, ctx context.Context) {
 	ticker := time.NewTicker(time.Second)
 	defer ticker.Stop()
+	const ewmaAlpha = 0.3
 	for {
 		select {
 		case <-done:
@@ -456,9 +593,49 @@ func (sm *SessionManager) reportStats(done <-chan struct{}, ctx context.Context)
 		case <-ctx.Done():
 			return
 		case <-ticker.C:
-			if sm.onStats != nil {
-				sm.onStats(sm.stats.Snapshot())
+			if sm.onStats == nil {
+				continue
 			}
+			snap := sm.stats.Snapshot()
+			now := time.Now()
+			if sm.speedReady {
+				elapsed := now.Sub(sm.prevTick).Seconds()
+				if elapsed <= 0 {
+					elapsed = 1
+				}
+				// Per-second deltas (bytes/sec), clamped to >= 0 in case
+				// of counter resets between reconnects within the same
+				// SessionManager lifetime.
+				rxV4 := max(0.0, float64(snap.RxBytesV4-sm.prevSnap.RxBytesV4)/elapsed)
+				txV4 := max(0.0, float64(snap.TxBytesV4-sm.prevSnap.TxBytesV4)/elapsed)
+				rxV6 := max(0.0, float64(snap.RxBytesV6-sm.prevSnap.RxBytesV6)/elapsed)
+				txV6 := max(0.0, float64(snap.TxBytesV6-sm.prevSnap.TxBytesV6)/elapsed)
+				if sm.ewmaRxV4 == 0 && sm.ewmaTxV4 == 0 && sm.ewmaRxV6 == 0 && sm.ewmaTxV6 == 0 {
+					// First real sample: seed instead of ramping from 0.
+					sm.ewmaRxV4, sm.ewmaTxV4, sm.ewmaRxV6, sm.ewmaTxV6 = rxV4, txV4, rxV6, txV6
+				} else {
+					sm.ewmaRxV4 = sm.ewmaRxV4*(1-ewmaAlpha) + rxV4*ewmaAlpha
+					sm.ewmaTxV4 = sm.ewmaTxV4*(1-ewmaAlpha) + txV4*ewmaAlpha
+					sm.ewmaRxV6 = sm.ewmaRxV6*(1-ewmaAlpha) + rxV6*ewmaAlpha
+					sm.ewmaTxV6 = sm.ewmaTxV6*(1-ewmaAlpha) + txV6*ewmaAlpha
+				}
+				snap.RxSpeedV4 = int64(sm.ewmaRxV4)
+				snap.TxSpeedV4 = int64(sm.ewmaTxV4)
+				snap.RxSpeedV6 = int64(sm.ewmaRxV6)
+				snap.TxSpeedV6 = int64(sm.ewmaTxV6)
+				snap.RxSpeed = snap.RxSpeedV4 + snap.RxSpeedV6
+				snap.TxSpeed = snap.TxSpeedV4 + snap.TxSpeedV6
+			}
+			sm.prevSnap = snap
+			// Clear speed fields on the stored prev copy so we don't
+			// accidentally carry stale speed into the next delta base
+			// (only cumulative bytes matter for deltas).
+			sm.prevSnap.RxSpeedV4, sm.prevSnap.TxSpeedV4 = 0, 0
+			sm.prevSnap.RxSpeedV6, sm.prevSnap.TxSpeedV6 = 0, 0
+			sm.prevSnap.RxSpeed, sm.prevSnap.TxSpeed = 0, 0
+			sm.prevTick = now
+			sm.speedReady = true
+			sm.onStats(snap)
 		}
 	}
 }
@@ -24,9 +24,9 @@
 	<key>CFBundlePackageType</key>
 	<string>APPL</string>
 	<key>CFBundleShortVersionString</key>
-	<string>1.0.0</string>
+	<string>0.3.7</string>
 	<key>CFBundleVersion</key>
-	<string>1</string>
+	<string>0</string>
 	<key>LSMinimumSystemVersion</key>
 	<string>11.0</string>
 	<key>NSHighResolutionCapable</key>
@@ -0,0 +1,51 @@
+// genico converts resources/icon.png into a Windows .ico file using the
+// PNG-in-ICO format (the PNG bytes are wrapped in a minimal ICO container
+// without decoding/re-encoding). Works on Windows Vista and later.
+//
+// Run: go run resources/genico/main.go
+package main
+
+import (
+	"encoding/binary"
+	"fmt"
+	"os"
+)
+
+func main() {
+	pngData, err := os.ReadFile("resources/icon.png")
+	if err != nil {
+		fmt.Fprintf(os.Stderr, "genico: %v\n", err)
+		os.Exit(1)
+	}
+
+	// ICO header (6 bytes) + one directory entry (16 bytes) = 22 bytes overhead.
+	const headerSize = 6
+	const entrySize = 16
+	dataOffset := uint32(headerSize + entrySize)
+
+	ico := make([]byte, 0, headerSize+entrySize+len(pngData))
+
+	// ICONDIR
+	ico = binary.LittleEndian.AppendUint16(ico, 0) // reserved
+	ico = binary.LittleEndian.AppendUint16(ico, 1) // type = icon
+	ico = binary.LittleEndian.AppendUint16(ico, 1) // count = 1 image
+
+	// ICONDIRENTRY
+	ico = append(ico, 0)                            // width (0 = 256+, actual size in PNG header)
+	ico = append(ico, 0)                            // height (0 = 256+, actual size in PNG header)
+	ico = append(ico, 0)                            // color count (0 = ≥256 colors)
+	ico = append(ico, 0)                            // reserved
+	ico = binary.LittleEndian.AppendUint16(ico, 1)  // planes
+	ico = binary.LittleEndian.AppendUint16(ico, 32) // bit count
+	ico = binary.LittleEndian.AppendUint32(ico, uint32(len(pngData)))
+	ico = binary.LittleEndian.AppendUint32(ico, dataOffset)
+
+	// PNG image data
+	ico = append(ico, pngData...)
+
+	if err := os.WriteFile("resources/icon.ico", ico, 0644); err != nil {
+		fmt.Fprintf(os.Stderr, "genico: %v\n", err)
+		os.Exit(1)
+	}
+	fmt.Println("Generated resources/icon.ico")
+}
@@ -0,0 +1 @@
+LMVPN ICON "resources/icon.ico"
Author	SHA1	Message	Date
kevin	3e7df0f4d8	fix: 修复连接状态下切换配置后断开重连导致异常的问题 Release / build-macos (push) Canceled after 0s Details Release / build-windows (push) Canceled after 0s Details Release / release (push) Canceled after 0s Details 问题现象：连接中切换配置 -> 断开 -> 连接，会出现连接后瞬间断开、长时间无法重连。而先断开再切换配置则正常。根因分析（三个层面的资源泄漏叠加）： 1. pumpPackets 死锁 (session.go) Disconnect() 只关闭 WebSocket transport，不关闭 TUN 设备。 TUN->WS goroutine 阻塞在 dev.Read()，pumpPackets 的 wg.Wait() 永远不返回，cleanup()（关闭 TUN/删路由）无法执行，导致 TUN 设备和路由泄漏。 2. 僵尸 eventLoop + 僵尸 IPC 连接 (view.go) onDisconnect 不清空 ipcClient、不关闭 IPC 连接，旧 eventLoop 持续运行接收广播事件。eventLoop 正常事件处理无身份校验，旧 session 的 disconnected 广播会覆盖新 session 的 connected 状态。 3. stopSession 不等待 goroutine 退出 (daemon.go) d.session = nil 在 goroutine 仍在运行时即设置，新旧 session 并发执行导致 TUN/路由冲突。无 mutex 保护并发访问。修复内容（10 项，3 个文件）： session.go: - Disconnect() 新增 dev.Close() 解除 pumpPackets 死锁 - 新增 done channel，Disconnect() 阻塞等待 run goroutine 完全退出 - run() deferred setState 跳过用户主动断开时的冗余广播 - run() 顶部 ctx.Err() 检查后补 cleanup() daemon.go: - 新增 sync.Mutex 保护 session/cancel 并发访问 - 拆分 stopSession/stopSessionLocked 避免死锁 view.go: - onDisconnect 置 ipcClient=nil + client.Close() 终止僵尸 eventLoop - eventLoop 三个事件分支均加 if current == client 身份校验 - onConnect 覆盖前清理旧 IPC client - setConnButtons 连接时禁用配置下拉框	2026-07-08 20:57:50 +08:00
kevin	bf4744bb1d	feat: 添加服务端证书合法性验证（自定义CA/跳过验证/证书固定） Release / build-macos (push) Canceled after 0s Details Release / build-windows (push) Canceled after 0s Details Release / release (push) Canceled after 0s Details - 新增 internal/tlsconfig 包，集中构建 TLS 配置 - 修复 CDN 边缘 IP 故障转移时 HTTP 登录 TLS 验证失败的问题 - 支持自定义 CA 证书（内联 PEM + 文件路径，合并生效） - 支持 InsecureSkipVerify 跳过证书验证 - 支持证书固定（SHA-256 指纹校验） - TLS 验证错误设为不可恢复，避免无限重试 - Profile 编辑界面新增 TLS 设置区域，协议联动启用/禁用 - DB schema v4 迁移，新增 4 个 TLS 字段	2026-07-08 11:33:36 +08:00
kevin	97cd9d4553	fix: 提交 Windows 图标资源(icon.ico/.syso)修复 CI Release / build-macos (push) Canceled after 0s Details Release / build-windows (push) Canceled after 0s Details Release / release (push) Canceled after 0s Details	2026-07-07 20:40:48 +08:00
kevin	56c802c385	fix: 禁用 MSYS 路径转换修复 ISCC /D 参数	2026-07-07 20:30:16 +08:00
kevin	6026beb107	fix: 修正 macOS ditto 打包选项为 --keepParent	2026-07-07 20:22:22 +08:00
kevin	8c903860c2	docs: README 添加服务端项目地址与 CI 说明	2026-07-07 20:13:50 +08:00
kevin	7abbf9e6cc	feat: 添加 GitHub Actions 多平台自动发布工作流	2026-07-07 20:12:09 +08:00
kevin	45b9fa24a1	up	2026-07-07 19:57:54 +08:00
kevin	4108adf1f7	up	2026-07-07 19:57:33 +08:00
kevin	6074dd5a73	up readme	2026-07-07 19:43:48 +08:00
kevin	3c076785f6	feat: Windows 安装器 + 修复 daemon 无法连接问题 - 新增 Inno Setup 安装器脚本 (installer/lmvpn.iss)，支持自定义安装路径、桌面快捷方式、安装前杀死旧进程，打包 wintun.dll - Makefile 新增 installer-windows 目标，支持 ISCC 和 Wine 两种编译方式 - Windows IPC 从 AF_UNIX 改为 TCP (127.0.0.1:18923)，解决提权 daemon 与非提权 GUI 之间的完整性级别限制导致 daemon did not become reachable - 修复 elevation_windows.go 中 ShellExecute 参数路径含空格时被截断的问题 (C:\Program Files\LMVPN\lmvpnd.exe → 只取到 C:\Program) - ensureDaemon 重试次数 40→60，添加连接失败日志便于诊断 - 新增 IPCNetwork()/IPCAddress() 跨平台函数，统一 IPC 传输层抽象	2026-07-07 19:29:41 +08:00
kevin	019df7bc23	修复图标显示	2026-07-07 17:58:04 +08:00
kevin	9a1aca5d1b	up	2026-07-07 17:48:48 +08:00
kevin	027d837cb2	fix: 修复 Windows 端密码无法持久化的问题 Windows 端使用内存版 MemStore(keychain_other.go, 构建标签 !darwin), 进程退出后密码丢失,导致每次启动都需重新输入密码才能连接。新增 keychain_windows.go,基于 Windows 凭据管理器(Credential Manager) 实现 Store 接口,密码经 Windows 登录凭据加密并持久化,跨重启保留。 keychain_other.go 构建标签收窄为 !darwin && !windows,作为 Linux 回退。 macOS 版本不受影响(仍由 keychain_darwin.go 独占编译)。	2026-07-07 17:47:41 +08:00
kevin	0c5e996bfd	fix: 修复 Windows 端 IPv6 无法下行的问题根因: netsh interface ipv6 命令参数名用错 - configureIPv6Addr: name= → interface=,IPv6 地址未实际分配到适配器 - SetMTU IPv6: name= → interface= 路由修复: - cidrToV6Prefix: 用 Mask.Size() 取前缀长度,修复 fmt.Sprintf(%d, mask) 输出字节切片的 bug - addRoute6/deleteRoute6: netsh → route -6,用 :: 作 on-link gateway - addRouteVia6/deleteRouteVia6: 加 -6 flag - defaultGateway6: route -6 print :: → route -6 print(避免过滤掉 ::/0) - applyFull: IPv6 bypass 路由失败不再阻断全隧道路由	2026-07-07 17:37:09 +08:00
kevin	65a5932eba	feat: 支持 Windows x86_64 平台编译 - 新增 WinTun TUN 设备实现(tun_windows.go),无需安装驱动, wintun.dll 嵌入 exe 运行时自动释放 - 新增 Windows 路由管理(route_windows.go),使用 route/netsh 命令 - 新增 Windows 路径(paths_windows.go),使用 %APPDATA%/%LOCALAPPDATA% - 拆分 daemon 启动逻辑:launch_unix.go(Setsid) / launch_windows.go (CREATE_NEW_PROCESS_GROUP),公共代码提取到 launch_common.go - 拆分提权逻辑:elevation_darwin.go(osascript) / elevation_windows.go (ShellExecute UAC) / elevation_other.go(pkexec) - IPCSocketPath 按平台分散,Windows 用 %TEMP%\lmvpn.sock - daemon 二进制名用编译时常量(daemonBinaryName),按平台选定 .exe 后缀 - Makefile 新增 build-windows 目标 - 重新标记 !darwin 文件为 !darwin && !windows	2026-07-07 16:50:42 +08:00
kevin	6b9960076d	up	2026-07-07 14:40:07 +08:00
kevin	56102589f6	feat: 认证失败时停止重连并提示用户密码错误、账户禁用、令牌过期或限流等永久性认证错误不再无限重连，改为置 StateError 并通过 EvError 弹窗告知用户具体原因（中英文本地化）。网络错误仍正常指数退避重试。 - protocol: 新增 AuthErrorCode 类型与消息映射 - transport: AuthError/ServerError 携带 Code 字段 - vpn: run() 循环识别致命认证错误并停止，新增 onError 回调 - ipc/daemon/ui: 打通错误码到 UI 的本地化展示	2026-07-07 14:37:26 +08:00
kevin	6daa73fdb0	增加图标	2026-07-07 14:16:09 +08:00
kevin	abcbb6ae68	更新项目连接	2026-07-07 13:44:37 +08:00
kevin	9c16d804d9	修复按钮逻辑bug	2026-07-07 13:34:48 +08:00
kevin	e08480f609	整合配置列表	2026-07-07 13:16:07 +08:00
kevin	4420532a66	fix: ensureDaemon 自动检测并重启过期守护进程问题: 重新构建后 IPv6 等新功能不生效,客户端仍运行旧代码。根因: ensureDaemon() 通过 IPC socket 拨号时,若旧 daemon 进程仍在运行(重建后未退出),GUI 会直接复用旧进程,永不启动新二进制。日志证实旧 daemon 处理连接(init 日志无 ip6 字段),新代码从未执行。解决方案: 新增版本握手协议,GUI 启动时查询 daemon 构建版本, 版本不匹配则自动关闭旧进程并启动新的。 - 新建 internal/version 包,GUI 与 daemon 共享同一 Version 变量, 均通过 Makefile ldflags 注入 - IPC 新增 CmdVersion 命令,daemon 返回 version.Version; Response 增加 Version 字段,Client 新增 QueryVersion() 方法 - ensureDaemon() 拨号后查询版本,不匹配则发 CmdShutdown、等待 socket 释放、重新启动 daemon;旧 daemon 不识别 CmdVersion 时返回错误,同样触发重启 - Makefile LDFLAGS 改为注入 lmvpn/internal/version.Version	2026-07-07 12:42:23 +08:00