* ThinkNode G3, ETH support WIP
* ThinkNode G3, ETH support WIP
* ThinkNode G3, ETH support WIP
* ThinkNode G3, ETH support WIP
* ThinkNode G3, ETH support WIP
* ThinkNode G3, ETH support WIP
* ThinkNode G3, ETH support WIP
* rename variant and add guard macros
* older G3 operational. M7 next.
* Split out G3 and M7 to different variants. Completely new PCB design. The G3 stays on 'PRIVATE_HW'
* Define button behaviour and use all of the device flash
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
Co-authored-by: caveman99 <25002+caveman99@users.noreply.github.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* ThinkNode G3, ETH support WIP
* ThinkNode G3, ETH support WIP
* ThinkNode G3, ETH support WIP
* ThinkNode G3, ETH support WIP
* ThinkNode G3, ETH support WIP
* ThinkNode G3, ETH support WIP
* ThinkNode G3, ETH support WIP
* rename variant and add guard macros
* older G3 operational. M7 next.
* Split out G3 and M7 to different variants. Completely new PCB design. The G3 stays on 'PRIVATE_HW'
* Define button behaviour and use all of the device flash
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
Co-authored-by: caveman99 <25002+caveman99@users.noreply.github.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* Cardputer Kit
BMI270 WIP
* BMI270 support
* verify that the number of bytes read matches the requested length
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* trunk'd
* remove excessive logging
* Kick the screen when unsleeping
* Update the st7789 library, and enable displayon and displayoff
* Battery detection
* Default to arrow keys and enter, while in menus.
* Enable Backlight control
* Update src/detect/ScanI2CTwoWire.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* updateState method now accepts shouldRequestFocus parameter for better maintainability
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* BSEC2 Replacement
- add approximation for IAQ to non-BSEC2 platforms.
- Re-add this sensor to ESP32 targets, and refactor env_extra includes.
- Fix C++ 11 compatibility
* Check for gas resistance 0
* simplify the observer pattern, since all the called functions are const getters.
* use arduino macro over std: for numerical values and refactor local variables in drawScrollbar()
* oh, so Cppcheck actually complained about const pointers not being const.
* slowly getting out of ifdef hell
* fix inkHUD warnings as well
* last 2 check warnings
* git checks should fail on low defects from now on
* Preliminary Thinknode M4 Support
* oops
* Fix RF switch TX configuration
* trunk'd
* GPS fix for M4
* Battery handling and LED for M4
* Trunk
* Drop debug warnings
* Make Red LED notification
* Merge cleanup
* Make white LEDs flash during charge
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* Add LINK32 (Lilygo) Board with Light+Environment sensors
TODO: replace PRIVATE_HW with actual HWID
* Add LINK32 (Lilygo) Board with Light+Environment sensors
TODO: replace PRIVATE_HW with actual HWID
* Update to real HWID and trunk fmt
* Lib Update
Draft because PIN display doesn't work yet.
* pin entry still no worky
* Fix for missing PIN code issue (#6574)
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Alexander Begoon <alex@begoonlab.tech>
* [WIP] Base firmware pending support for 2nd button
* Update button behaviour. Still WIP
* [WIP] Base firmware pending support for 2nd button
* Update button behaviour. Still WIP
* change env to lowercase
Co-authored-by: rcarteraz <robert.l.carter2@gmail.com>
* yea - well - what else is new?
* fix secondary button behavior and update trunk
---------
Co-authored-by: rcarteraz <robert.l.carter2@gmail.com>
* * Update RAK9154 sensor to tx remote power telemetry
* remove uf2 script, pio run does that inline
* move sensor module to correct position
* disable LED and Accelerometer code on rak2560
* trunk fmt
* mention epaper variant
* attention, revert, revert
* Enable Environment Telemetry of these values
* fix float values
* fix detection of lark weather station
* fix unit tests and add support for Dfrobot rain gauge
* fix name display on bootup
* fix gauge init logic
* trunk fmt
- Support TLORA_V3.0. Update of the legendary 2.1_1.6.1 with solar charger, TCXO and IPEX connector.
- 'extra' some short-lived EOL intermediate boards in that range. If possible use T3S3 instead of all of these!
- update trunk to latest version
* update radiolib to 7.1.0
* stay at 7.0.2 for STM32, also remove unused board from ESP32 arch
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* T1000-E Peripherals
- enable intelligent charge controller signals
- enable Accelerometer
- enable internal I2C bus
- provide Power to Accelerometer
* POC Accelerometer Code (wakeScreen is moot for that device, just test if the driver works)
* fix building without the sensor
Thomas GöttgensandGitHub
