Merge branch 'develop' into Freetext

Suppress Navigation bar for Freetext frames
Emote Picker Refactoring
2026-02-23 20:55:58 -05:00 · 2026-02-19 21:49:43 -05:00 · 2026-02-19 18:26:52 -05:00 · 2026-02-19 17:35:58 -05:00 · 2026-02-19 17:09:28 -05:00 · 2026-02-19 14:44:41 -05:00
481 changed files with 5302 additions and 18992 deletions
@@ -100,7 +100,7 @@ runs:
      id: version

    - name: Store binaries as an artifact
-      uses: actions/upload-artifact@v7
+      uses: actions/upload-artifact@v6
      with:
        name: firmware-${{ inputs.arch }}-${{ inputs.board }}-${{ steps.version.outputs.long }}
        overwrite: true
@@ -8,6 +8,8 @@ runs:
      uses: actions/checkout@v6
      with:
        submodules: recursive
+        ref: ${{github.event.pull_request.head.ref}}
+        repository: ${{github.event.pull_request.head.repo.full_name}}

    - name: Install dependencies
      shell: bash
@@ -4,11 +4,11 @@ This document provides context and guidelines for AI assistants working with the

 ## Project Overview

-Meshtastic is an open-source LoRa mesh networking project for long-range, low-power communication without relying on internet or cellular infrastructure. The firmware enables text messaging, location sharing, and telemetry over a decentralized mesh network. The project uses **C++17** as its language standard across all platforms.
+Meshtastic is an open-source LoRa mesh networking project for long-range, low-power communication without relying on internet or cellular infrastructure. The firmware enables text messaging, location sharing, and telemetry over a decentralized mesh network.

 ### Supported Hardware Platforms

- **ESP32** (ESP32, ESP32-S3, ESP32-C3, ESP32-C6) - Most common platform
+- **ESP32** (ESP32, ESP32-S3, ESP32-C3) - Most common platform
 - **nRF52** (nRF52840, nRF52833) - Low power Nordic chips
 - **RP2040/RP2350** - Raspberry Pi Pico variants
 - **STM32WL** - STM32 with integrated LoRa
@@ -80,46 +80,21 @@ firmware/
 │   │   ├── NodeDB.*       # Node database management
 │   │   ├── Router.*       # Packet routing
 │   │   ├── Channels.*     # Channel management
-│   │   ├── CryptoEngine.* # AES-CCM encryption
 │   │   ├── *Interface.*   # Radio interface implementations
-│   │   ├── api/           # WiFi/Ethernet server APIs (ServerAPI, PacketAPI)
-│   │   ├── http/          # HTTP server (WebServer, ContentHandler)
-│   │   ├── wifi/          # WiFi support (WiFiAPClient)
-│   │   ├── eth/           # Ethernet support (ethClient)
-│   │   ├── udp/           # UDP multicast
-│   │   ├── compression/   # Message compression (unishox2)
 │   │   └── generated/     # Protobuf generated code
 │   ├── modules/           # Feature modules (Position, Telemetry, etc.)
-│   │   └── Telemetry/     # Telemetry subsystem
-│   │       └── Sensor/    # 50+ I2C sensor drivers
 │   ├── gps/               # GPS handling
 │   ├── graphics/          # Display drivers and UI
-│   │   └── niche/         # Specialized UIs (InkHUD e-ink framework)
-│   ├── platform/          # Platform-specific code (esp32, nrf52, rp2xx0, stm32wl, portduino)
-│   ├── input/             # Input device handling (InputBroker, keyboards, buttons)
-│   ├── detect/            # I2C hardware auto-detection (80+ device types)
-│   ├── motion/            # Accelerometer drivers (BMA423, BMI270, MPU6050, etc.)
-│   ├── mqtt/              # MQTT bridge client
-│   ├── power/             # Power HAL
-│   ├── nimble/            # BLE via NimBLE
-│   ├── buzz/              # Audio/notification (buzzer, RTTTL)
-│   ├── serialization/     # JSON serialization, COBS encoding
-│   ├── watchdog/          # Hardware watchdog thread
-│   ├── concurrency/       # Threading utilities (OSThread, Lock)
-│   ├── PowerFSM.*         # Power finite state machine
-│   └── Observer.h         # Observer/Observable event pattern
+│   ├── platform/          # Platform-specific code
+│   ├── input/             # Input device handling
+│   └── concurrency/       # Threading utilities
 ├── variants/              # Hardware variant definitions
 │   ├── esp32/            # ESP32 variants
 │   ├── esp32s3/          # ESP32-S3 variants
-│   ├── esp32c3/          # ESP32-C3 variants
-│   ├── esp32c6/          # ESP32-C6 variants
-│   ├── nrf52840/         # nRF52 variants
-│   ├── rp2040/           # RP2040/RP2350 variants
-│   ├── stm32/            # STM32WL variants
-│   └── native/           # Linux/Portduino variants
+│   ├── nrf52/            # nRF52 variants
+│   └── rp2xxx/           # RP2040/RP2350 variants
 ├── protobufs/            # Protocol buffer definitions
 ├── boards/               # Custom PlatformIO board definitions
-├── test/                 # Unit tests (12 test suites)
 └── bin/                  # Build and utility scripts
 ```

@@ -130,7 +105,6 @@ firmware/
 - Follow existing code style - run `trunk fmt` before commits
 - Prefer `LOG_DEBUG`, `LOG_INFO`, `LOG_WARN`, `LOG_ERROR` for logging
 - Use `assert()` for invariants that should never fail
- C++17 features are available (`std::optional`, structured bindings, `if constexpr`, etc.)

 ### Naming Conventions

@@ -144,151 +118,70 @@ firmware/

 #### Module System

-Modules use a three-tier class hierarchy:
+Modules inherit from `MeshModule` or `ProtobufModule<T>` and implement:

-1. **`MeshModule`** - Base class. Implement `wantPacket()` and `handleReceived()`. Returns `ProcessMessage::STOP` or `ProcessMessage::CONTINUE`.
-2. **`SinglePortModule`** - Handles a single portnum. Simplified `wantPacket()` that checks `decoded.portnum`.
-3. **`ProtobufModule<T>`** - Template for protobuf-based modules. Handles encoding/decoding automatically.
-
-Most modules also inherit from **`OSThread`** for periodic tasks (the "mixin" pattern):
+- `handleReceivedProtobuf()` - Process incoming packets
+- `allocReply()` - Generate response packets
+- `runOnce()` - Periodic task execution (returns next run interval in ms)

 ```cpp
-class MyModule : public ProtobufModule<meshtastic_MyMessage>, private concurrency::OSThread
+class MyModule : public ProtobufModule<meshtastic_MyMessage>
 {
-  public:
-    MyModule();
-
  protected:
    virtual bool handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshtastic_MyMessage *msg) override;
-    virtual meshtastic_MeshPacket *allocReply() override;       // Generate response packets
-    virtual int32_t runOnce() override;                         // Periodic task (returns next interval in ms)
-    virtual bool alterReceivedProtobuf(meshtastic_MeshPacket &mp, meshtastic_MyMessage *msg); // Modify in-flight
-    virtual bool wantUIFrame();                                 // Request a UI display frame
+    virtual int32_t runOnce() override;
 };
 ```

-Modules are registered in `src/modules/Modules.cpp` guarded by `MESHTASTIC_EXCLUDE_*` flags.
-
-#### Observer/Observable Pattern
-
-Event-driven communication between subsystems uses `src/Observer.h`:
-
-```cpp
-// Observable emits events
-Observable<const meshtastic::Status *> newStatus;
-newStatus.notifyObservers(&status);
-
-// Observer receives events via callback
-CallbackObserver<MyClass, const meshtastic::Status *> statusObserver =
-    CallbackObserver<MyClass, const meshtastic::Status *>(this, &MyClass::handleStatusUpdate);
-```
-
 #### Configuration Access

 - `config.*` - Device configuration (LoRa, position, power, etc.)
 - `moduleConfig.*` - Module-specific configuration
 - `channels.*` - Channel configuration and management
- `owner` - Device owner info
- `myNodeInfo` - Local node info

 #### Default Values

 Use the `Default` class helpers in `src/mesh/Default.h`:

 - `Default::getConfiguredOrDefaultMs(configured, default)` - Returns ms, using default if configured is 0
- `Default::getConfiguredOrDefault(configured, default)` - Generic configured/default getter
 - `Default::getConfiguredOrMinimumValue(configured, min)` - Enforces minimum values
 - `Default::getConfiguredOrDefaultMsScaled(configured, default, numNodes)` - Scales based on network size

 #### Thread Safety

- Use `concurrency::Lock` and `concurrency::LockGuard` for mutex protection
+- Use `concurrency::Lock` for mutex protection
 - Radio SPI access uses `SPILock`
 - Prefer `OSThread` for background tasks

-### Hardware Detection
-
-`src/detect/ScanI2C` automatically enumerates 80+ I2C device types at boot including displays, sensors, RTCs, keyboards, PMUs, and touch controllers. This drives automatic initialization of the correct drivers.
-
-### Graphics/UI System
-
-Multiple display driver families in `src/graphics/`:
-
- **OLED**: SSD1306, SH1106, ST7567
- **TFT**: TFTDisplay (LovyanGFX-based)
- **E-Ink**: EInkDisplay2, EInkDynamicDisplay, EInkParallelDisplay
-
-**InkHUD** (`src/graphics/niche/InkHUD/`) is an event-driven e-ink UI framework:
-
- Applet-based architecture — modular display tiles
- Read-only, static display optimized for minimal refreshes and low power
- Configured per-variant via `nicheGraphics.h`
- Separate PlatformIO config: `src/graphics/niche/InkHUD/PlatformioConfig.ini`
-
-### Input System
-
-`src/input/InputBroker` is the centralized input event dispatcher. Supports multiple input sources: buttons, keyboards (BBQ10, Cardputer, TCA8418), touch screens, rotary encoders, and matrix keyboards.
-
-### Power Management
-
-`src/PowerFSM.*` implements a finite state machine with states: `stateON`, `statePOWER`, `stateSERIAL`, `stateDARK`. Key events: `EVENT_PRESS`, `EVENT_WAKE_TIMER`, `EVENT_LOW_BATTERY`, `EVENT_RECEIVED_MSG`, `EVENT_SHUTDOWN`. Conditionally excluded with `MESHTASTIC_EXCLUDE_POWER_FSM` (falls back to `FakeFsm`).
-
-### Motion Sensors
-
-`src/motion/AccelerometerThread` provides background motion monitoring with automatic screen wake and double-tap button press detection. Supports 10+ accelerometer/gyroscope chips (BMA423, BMI270, MPU6050, LIS3DH, LSM6DS3, STK8XXX, QMA6100P, ICM20948, BMX160).
-
-### Telemetry Sensor Library
-
-`src/modules/Telemetry/Sensor/` contains 50+ I2C sensor drivers organized by category:
-
- **Power monitoring**: INA219/226/260/3221, MAX17048
- **Environmental**: BME280/680, SCD4X (CO₂), SEN5X (particulate)
- **Humidity/Temperature**: SHT3X/4X, AHT10, MCP9808, MLX90614
- **Light**: BH1750, TSL2561/2591, VEML7700, LTR390UV, OPT3001
- **Air quality**: PMSA003I, SFA30
- **Specialized**: CGRadSens (radiation), NAU7802 (weight scale)
-
-### API/Networking
-
-`src/mesh/api/` provides a template-based `ServerAPI` for client communication over WiFi (`WiFiServerAPI`) and Ethernet (`ethServerAPI`). Default port: **4403**. HTTP server in `src/mesh/http/`. JSON serialization in `src/serialization/MeshPacketSerializer`.
-
 ### Hardware Variants

 Each hardware variant has:

 - `variant.h` - Pin definitions and hardware capabilities
 - `platformio.ini` - Build configuration
- Optional: `pins_arduino.h`, `rfswitch.h`, `nicheGraphics.h` (for InkHUD variants)
+- Optional: `pins_arduino.h`, `rfswitch.h`

 Key defines in variant.h:

 ```cpp
 #define USE_SX1262          // Radio chip selection
 #define HAS_GPS 1           // Hardware capabilities
-#define HAS_SCREEN 1        // Display present
 #define LORA_CS 36          // Pin assignments
 #define SX126X_DIO1 14      // Radio-specific pins
 ```

 ### Protobuf Messages

- Defined in `protobufs/meshtastic/*.proto` (~32 proto files)
- Generated code in `src/mesh/generated/meshtastic/`
+- Defined in `protobufs/meshtastic/*.proto`
+- Generated code in `src/mesh/generated/`
 - Regenerate with `bin/regen-protos.sh`
 - Message types prefixed with `meshtastic_`
- Nanopb `.options` files control field sizes and encoding

 ### Conditional Compilation

 ```cpp
 #if !MESHTASTIC_EXCLUDE_GPS        // Feature exclusion
-#if !MESHTASTIC_EXCLUDE_WIFI       // Network feature exclusion
-#if !MESHTASTIC_EXCLUDE_BLUETOOTH  // BLE exclusion
-#if !MESHTASTIC_EXCLUDE_POWER_FSM  // Power FSM exclusion
 #ifdef ARCH_ESP32                   // Architecture-specific
-#ifdef ARCH_NRF52                   // Nordic platform
-#ifdef ARCH_RP2040                  // Raspberry Pi Pico
-#ifdef ARCH_PORTDUINO               // Linux native
 #if defined(USE_SX1262)            // Radio-specific
 #ifdef HAS_SCREEN                   // Hardware capability
 #if USERPREFS_EVENT_MODE           // User preferences
@@ -299,7 +192,7 @@ Key defines in variant.h:
 Uses **PlatformIO** with custom scripts:

 - `bin/platformio-pre.py` - Pre-build script
- `bin/platformio-custom.py` - Custom build logic, manifest generation
+- `bin/platformio-custom.py` - Custom build logic

 Build commands:

@@ -309,38 +202,21 @@ pio run -e tbeam -t upload    # Build and upload
 pio run -e native             # Build native/Linux version
 ```

-### Build Manifest
-
-`bin/platformio-custom.py` emits a build manifest with metadata:
-
- `hasMui`, `hasInkHud` - UI capability flags (overridable via `custom_meshtastic_has_mui`, `custom_meshtastic_has_ink_hud`)
- Architecture normalization (e.g., `esp32s3` → `esp32-s3` for API compatibility)
-
 ## Common Tasks

 ### Adding a New Module

 1. Create `src/modules/MyModule.cpp` and `.h`
-2. Inherit from appropriate base class (`MeshModule`, `SinglePortModule`, or `ProtobufModule<T>`)
-3. Mix in `concurrency::OSThread` if periodic work is needed
-4. Register in `src/modules/Modules.cpp` guarded by `#if !MESHTASTIC_EXCLUDE_MYMODULE`
-5. Add protobuf messages if needed in `protobufs/meshtastic/`
-6. Add test suite in `test/test_mymodule/` if applicable
+2. Inherit from appropriate base class
+3. Register in `src/modules/Modules.cpp`
+4. Add protobuf messages if needed in `protobufs/`

 ### Adding a New Hardware Variant

 1. Create directory under `variants/<arch>/<name>/`
-2. Add `variant.h` with pin definitions and hardware capability defines
-3. Add `platformio.ini` with build config — use `extends` to reference common base (e.g., `esp32s3_base`)
-4. Set `custom_meshtastic_support_level = 1` (PR builds) or `2` (merge builds)
-5. For e-ink displays, add `nicheGraphics.h` for InkHUD configuration
-
-### Adding a New Telemetry Sensor
-
-1. Create driver in `src/modules/Telemetry/Sensor/` following existing sensor pattern
-2. Register I2C address in `src/detect/ScanI2C` for auto-detection
-3. Integrate with the appropriate telemetry module (Environment, Health, Power, AirQuality)
-4. Add proto fields in `protobufs/meshtastic/telemetry.proto` if new data types are needed
+2. Add `variant.h` with pin definitions
+3. Add `platformio.ini` with build config
+4. Reference common configs with `extends`

 ### Modifying Configuration Defaults

@@ -429,22 +305,9 @@ Most workflows can be triggered manually via `workflow_dispatch` for testing.

 ## Testing

-Unit tests in `test/` directory with 12 test suites:
-
- `test_crypto/` - Cryptography
- `test_mqtt/` - MQTT integration
- `test_radio/` - Radio interface
- `test_mesh_module/` - Module framework
- `test_meshpacket_serializer/` - Packet serialization
- `test_transmit_history/` - Retransmission tracking
- `test_atak/` - ATAK integration
- `test_default/` - Default configuration
- `test_http_content_handler/` - HTTP handling
- `test_serial/` - Serial communication
-
-Run with: `pio test -e native`
-
-Simulation testing: `bin/test-simulator.sh`
+- Unit tests in `test/` directory
+- Run with `pio test -e native`
+- Use `bin/test-simulator.sh` for simulation testing

 ## Resources

@@ -1,138 +0,0 @@
-# New Meshtastic Module
-
-Guide for developing a new Meshtastic firmware module.
-
-## Module Hierarchy
-
-Choose the appropriate base class:
-
-1. **`MeshModule`** — Raw base class. Override `wantPacket()` and `handleReceived()`. Returns `ProcessMessage::STOP` or `ProcessMessage::CONTINUE`.
-2. **`SinglePortModule`** — Handles a single `meshtastic_PortNum`. Constructor takes `(name, portNum)`. Simplified `wantPacket()` checking `decoded.portnum`. Use `allocDataPacket()` to create outgoing packets.
-3. **`ProtobufModule<T>`** — Template for protobuf-encoded modules. Constructor takes `(name, portNum, fields)`. Override `handleReceivedProtobuf()`. Use `allocDataProtobuf(payload)` to create outgoing packets.
-
-Most modules also mix in `concurrency::OSThread` for periodic background tasks.
-
-## Implementation Pattern
-
-```cpp
-// src/modules/MyModule.h
-#pragma once
-#include "ProtobufModule.h"
-#include "concurrency/OSThread.h"
-
-class MyModule : public ProtobufModule<meshtastic_MyMessage>, private concurrency::OSThread
-{
-  public:
-    MyModule();
-
-  protected:
-    // Process incoming protobuf packet. Return true to stop further processing.
-    virtual bool handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshtastic_MyMessage *msg) override;
-
-    // Generate response packet (optional)
-    virtual meshtastic_MeshPacket *allocReply() override;
-
-    // Periodic task — return next run interval in ms, or disable()
-    virtual int32_t runOnce() override;
-
-    // Modify packet in-flight before delivery (optional)
-    virtual bool alterReceivedProtobuf(meshtastic_MeshPacket &mp, meshtastic_MyMessage *msg);
-
-    // Request a UI display frame (optional)
-    virtual bool wantUIFrame();
-};
-```
-
-## Registration
-
-Register in `src/modules/Modules.cpp` inside `setupModules()`:
-
-```cpp
-#if !MESHTASTIC_EXCLUDE_MYMODULE
-    new MyModule();
-#endif
-```
-
-If other code needs to reference the module instance:
-
-```cpp
-#if !MESHTASTIC_EXCLUDE_MYMODULE
-    myModule = new MyModule();
-#endif
-```
-
-And declare the global in the header:
-
-```cpp
-extern MyModule *myModule;
-```
-
-Some modules also conditionally instantiate based on `moduleConfig`:
-
-```cpp
-#if !MESHTASTIC_EXCLUDE_MYMODULE
-    if (moduleConfig.has_my_module && moduleConfig.my_module.enabled) {
-        new MyModule();
-    }
-#endif
-```
-
-## Conditional Compilation
-
-Add a `MESHTASTIC_EXCLUDE_MYMODULE` guard. This allows the module to be excluded from constrained builds. The flag name must follow the pattern: `MESHTASTIC_EXCLUDE_` + uppercase module name.
-
-## Protobuf Messages (if needed)
-
-1. Define messages in `protobufs/meshtastic/` (e.g., `mymodule.proto`)
-2. Add a `.options` file for nanopb field size constraints
-3. Regenerate with `bin/regen-protos.sh`
-4. Generated code appears in `src/mesh/generated/meshtastic/`
-5. Assign a `meshtastic_PortNum` if the module uses a new port number
-
-## Timing and Defaults
-
-Use `Default` class helpers for configurable intervals:
-
-```cpp
-int32_t MyModule::runOnce()
-{
-    uint32_t interval = Default::getConfiguredOrDefaultMs(moduleConfig.my_module.update_interval,
-                                                          default_my_module_interval);
-    // ... do work ...
-    return interval;
-}
-```
-
-On public/default channels, enforce minimums with `Default::getConfiguredOrMinimumValue()`.
-
-## Observer Pattern
-
-Subscribe to system events:
-
-```cpp
-CallbackObserver<MyModule, const meshtastic::Status *> statusObserver =
-    CallbackObserver<MyModule, const meshtastic::Status *>(this, &MyModule::handleStatusUpdate);
-```
-
-## Testing
-
-Add test suite in `test/test_mymodule/`:
-
-```
-test/
-└── test_mymodule/
-    └── test_main.cpp
-```
-
-Run with: `pio test -e native`
-
-## Checklist
-
- [ ] Header and implementation files in `src/modules/`
- [ ] Inherit from appropriate base class (MeshModule / SinglePortModule / ProtobufModule)
- [ ] Mix in OSThread if periodic work is needed
- [ ] Register in `src/modules/Modules.cpp` with `MESHTASTIC_EXCLUDE_` guard
- [ ] Add protobuf definitions if needed (`protobufs/meshtastic/`)
- [ ] Use `Default::getConfiguredOrDefaultMs()` for timing
- [ ] Respect bandwidth limits on public channels
- [ ] Add test suite in `test/`
@@ -1,149 +0,0 @@
-# New Telemetry Sensor
-
-Guide for adding a new I2C telemetry sensor driver to Meshtastic firmware.
-
-## Overview
-
-Telemetry sensors live in `src/modules/Telemetry/Sensor/`. There are 50+ existing drivers organized by measurement type. Each sensor integrates with one of the telemetry modules:
-
- **EnvironmentTelemetryModule** — Temperature, humidity, pressure, gas, light
- **AirQualityTelemetryModule** — Particulate matter, VOCs
- **PowerTelemetryModule** — Voltage, current, power monitoring
- **HealthTelemetryModule** — Heart rate, SpO2, body temperature
-
-## Sensor Driver Pattern
-
-Each sensor has a `.h` and `.cpp` file pair following this pattern:
-
-```cpp
-// src/modules/Telemetry/Sensor/MySensor.h
-#pragma once
-#include "TelemetrySensor.h"
-#include <MySensorLibrary.h>  // Arduino/PlatformIO library
-
-class MySensor : virtual public TelemetrySensor
-{
-  private:
-    MySensorLibrary sensor;
-
-  public:
-    MySensor() : TelemetrySensor(meshtastic_TelemetrySensorType_MY_SENSOR, "MySensor") {}
-
-    // Initialize sensor hardware. Return true on success.
-    virtual void setup() override;
-
-    // Read sensor data into the telemetry protobuf. Return true on success.
-    virtual bool getMetrics(meshtastic_Telemetry *measurement) override;
-};
-```
-
-```cpp
-// src/modules/Telemetry/Sensor/MySensor.cpp
-#include "MySensor.h"
-#include "TelemetrySensor.h"
-
-void MySensor::setup()
-{
-    sensor.begin();
-    // Configure sensor parameters...
-}
-
-bool MySensor::getMetrics(meshtastic_Telemetry *measurement)
-{
-    // Read from hardware
-    float value = sensor.readValue();
-
-    // Populate the appropriate protobuf variant
-    measurement->variant.environment_metrics.temperature = value;
-    // ... other fields ...
-
-    return true;
-}
-```
-
-## I2C Address Registration
-
-Register the sensor's I2C address(es) in `src/detect/ScanI2C` so it's auto-detected at boot:
-
-1. Add a `DeviceType` enum entry in `src/detect/ScanI2C.h`
-2. Add the I2C address mapping in `src/detect/ScanI2CTwoWire.cpp`
-
-The scan runs at boot and populates a device map that telemetry modules use to decide which sensors to initialize.
-
-## Protobuf Fields
-
-If the sensor provides data not covered by existing telemetry fields:
-
-1. Add fields to the appropriate message in `protobufs/meshtastic/telemetry.proto`:
-   - `EnvironmentMetrics` — Environmental measurements
-   - `AirQualityMetrics` — Air quality data
-   - `PowerMetrics` — Power/energy data
-   - `HealthMetrics` — Health/biometric data
-2. Add a `.options` constraint if needed (field sizes for nanopb)
-3. Regenerate: `bin/regen-protos.sh`
-
-## Sensor Type Enum
-
-Add the sensor to `meshtastic_TelemetrySensorType` enum in `protobufs/meshtastic/telemetry.proto`:
-
-```protobuf
-enum TelemetrySensorType {
-    // ... existing entries ...
-    MY_SENSOR = XX;
-}
-```
-
-## Integration with Telemetry Module
-
-Wire the sensor into the appropriate telemetry module. For environment sensors, this is typically in `src/modules/Telemetry/EnvironmentTelemetry.cpp`:
-
-1. Include the sensor header
-2. Add initialization in `setupSensor()` guarded by detection results
-3. Call `getMetrics()` in the measurement collection path
-
-Example pattern from existing sensors:
-
-```cpp
-#include "Sensor/MySensor.h"
-
-MySensor mySensor;
-
-// In setup:
-if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_MY_SENSOR].first > 0) {
-    mySensor.setup();
-}
-
-// In measurement collection:
-if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_MY_SENSOR].first > 0) {
-    mySensor.getMetrics(&measurement);
-}
-```
-
-## Library Dependencies
-
-If the sensor needs an external library, add it to the `lib_deps` in the relevant base platformio.ini configs:
-
-```ini
-lib_deps =
-    ${env.lib_deps}
-    mysensorlibrary@^1.0.0
-```
-
-Or use a conditional dependency if it's platform-specific.
-
-## Unit Conversions
-
-If the sensor reports values in non-standard units, use `src/modules/Telemetry/UnitConversions.h` for conversion helpers (e.g., Celsius ↔ Fahrenheit, hPa ↔ inHg).
-
-## Checklist
-
- [ ] Create `src/modules/Telemetry/Sensor/MySensor.h` and `.cpp`
- [ ] Inherit from `TelemetrySensor` base class
- [ ] Implement `setup()` and `getMetrics()` methods
- [ ] Add `meshtastic_TelemetrySensorType` enum entry in `telemetry.proto`
- [ ] Add I2C address to `src/detect/ScanI2C` for auto-detection
- [ ] Add protobuf fields in `telemetry.proto` if new data types needed
- [ ] Regenerate protos: `bin/regen-protos.sh`
- [ ] Wire into the appropriate telemetry module (Environment/AirQuality/Power/Health)
- [ ] Add library dependency if external library required
- [ ] Test on hardware or native build
@@ -1,178 +0,0 @@
-# New Hardware Variant
-
-Guide for adding a new Meshtastic hardware variant to the firmware.
-
-## Directory Structure
-
-Create under `variants/<arch>/<name>/`:
-
-```
-variants/
-├── esp32/          # ESP32
-├── esp32s3/        # ESP32-S3
-├── esp32c3/        # ESP32-C3
-├── esp32c6/        # ESP32-C6
-├── nrf52840/       # nRF52840
-├── rp2040/         # RP2040/RP2350
-├── stm32/          # STM32WL
-└── native/         # Linux/Portduino
-```
-
-Each variant needs at minimum:
-
- `variant.h` — Pin definitions and hardware capabilities
- `platformio.ini` — Build configuration
-
-Optional files:
-
- `pins_arduino.h` — Arduino pin mapping overrides
- `rfswitch.h` — RF switch control for multi-band radios
- `nicheGraphics.h` — InkHUD e-ink configuration
-
-## variant.h Template
-
-```cpp
-// Pin definitions
-#define I2C_SDA 21
-#define I2C_SCL 22
-
-// LoRa radio
-#define USE_SX1262              // Radio chip: USE_SX1262, USE_SX1268, USE_SX1280, USE_RF95, USE_LLCC68, USE_LR1110, USE_LR1120, USE_LR1121
-#define LORA_CS   18
-#define LORA_SCK  5
-#define LORA_MOSI 27
-#define LORA_MISO 19
-#define LORA_DIO1 33            // SX126x: DIO1, SX128x: DIO1, RF95: IRQ
-#define LORA_RESET 23
-#define LORA_BUSY 32            // SX126x/SX128x only
-#define SX126X_DIO2_AS_RF_SWITCH // Common for SX1262 boards
-
-// GPS
-#define HAS_GPS 1
-#define GPS_RX_PIN 34
-#define GPS_TX_PIN 12
-// #define PIN_GPS_EN 47         // Optional GPS enable pin
-// #define GPS_BAUDRATE 9600     // Override default 9600
-
-// Display
-#define HAS_SCREEN 1
-// #define USE_SSD1306            // OLED type
-// #define USE_SH1106             // Alternative OLED
-// #define USE_ST7789             // TFT type
-// #define SCREEN_WIDTH 128
-// #define SCREEN_HEIGHT 64
-
-// LEDs
-#define LED_PIN 2               // Status LED (optional)
-// #define HAS_NEOPIXEL 1        // WS2812 support
-
-// Buttons
-#define BUTTON_PIN 38
-// #define BUTTON_PIN_ALT 0      // Secondary button
-
-// Power management
-// #define HAS_AXP192 1          // AXP192 PMU (T-Beam v1.0)
-// #define HAS_AXP2101 1         // AXP2101 PMU (T-Beam v1.2+)
-// #define BATTERY_PIN 35        // ADC battery voltage pin
-// #define ADC_MULTIPLIER 2.0    // Voltage divider ratio
-
-// Optional I2C devices
-// #define HAS_RTC 1             // Real-time clock
-// #define HAS_TELEMETRY 1       // Enable telemetry sensor support
-// #define HAS_SENSOR 1          // I2C sensors present
-```
-
-## platformio.ini Template
-
-```ini
-[env:my_variant]
-extends = esp32s3_base            ; Use architecture-specific base
-board = esp32-s3-devkitc-1        ; PlatformIO board definition (or custom in boards/)
-board_level = extra               ; Build level: extra, or omit for default
-custom_meshtastic_support_level = 1  ; 1 = PR builds, 2 = merge builds only
-
-build_flags =
-    ${esp32s3_base.build_flags}
-    -D MY_VARIANT_SPECIFIC_FLAG=1
-    -I variants/esp32s3/my_variant  ; Include path for variant.h
-
-upload_speed = 921600
-```
-
-### Common Base Configs
-
- `esp32_base` / `esp32-common.ini` — ESP32
- `esp32s3_base` — ESP32-S3
- `esp32c3_base` — ESP32-C3
- `esp32c6_base` — ESP32-C6
- `nrf52840_base` / `nrf52.ini` — nRF52840
- `rp2040_base` — RP2040/RP2350
-
-### Support Levels
-
- `custom_meshtastic_support_level = 1` — Built on every PR (actively supported)
- `custom_meshtastic_support_level = 2` — Built only on merge to main branches
- `board_level = extra` — Only built on full releases
-
-## Build Manifest Metadata
-
-`bin/platformio-custom.py` emits UI capability flags in the build manifest:
-
- `custom_meshtastic_has_mui = true/false` — Override MUI detection
- `custom_meshtastic_has_ink_hud = true/false` — Override InkHUD detection
- Architecture names are normalized (e.g., `esp32s3` → `esp32-s3`)
-
-## InkHUD E-Ink Variants
-
-For e-ink display variants using the InkHUD framework, add `nicheGraphics.h`:
-
-```cpp
-// nicheGraphics.h — InkHUD configuration for this variant
-#define INKHUD                     // Enable InkHUD
-// Configure display, applets, and refresh behavior per device
-```
-
-InkHUD has its own PlatformIO config: `src/graphics/niche/InkHUD/PlatformioConfig.ini`
-
-## I2C Device Detection
-
-If the variant has I2C devices, ensure `src/detect/ScanI2C` will detect them. The auto-detection system handles 80+ device types including displays, sensors, RTCs, keyboards, PMUs, and touch controllers at boot.
-
-## Custom Board Definitions
-
-If the PlatformIO board doesn't exist, create a custom board JSON in `boards/`:
-
-```json
-{
-  "build": {
-    "arduino": { "ldscript": "esp32s3_out.ld" },
-    "core": "esp32",
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "mcu": "esp32s3",
-    "variant": "esp32s3"
-  },
-  "connectivity": ["wifi", "bluetooth"],
-  "frameworks": ["arduino", "espidf"],
-  "name": "My Custom Board",
-  "upload": {
-    "flash_size": "8MB",
-    "maximum_ram_size": 327680,
-    "maximum_size": 8388608
-  },
-  "url": "https://example.com",
-  "vendor": "MyVendor"
-}
-```
-
-## Checklist
-
- [ ] Create `variants/<arch>/<name>/variant.h` with pin definitions
- [ ] Create `variants/<arch>/<name>/platformio.ini` extending correct base
- [ ] Set `custom_meshtastic_support_level` (1 or 2)
- [ ] Verify radio chip define matches hardware (`USE_SX1262`, etc.)
- [ ] Set hardware capability flags (`HAS_GPS`, `HAS_SCREEN`, etc.)
- [ ] Add custom board JSON in `boards/` if needed
- [ ] Test build: `pio run -e my_variant`
- [ ] For e-ink: add `nicheGraphics.h` with InkHUD config
@@ -4,16 +4,16 @@

 - Before starting on some new big chunk of code, it it is optional but highly recommended to open an issue first
  to say "Hey, I think this idea X should be implemented and I'm starting work on it. My general plan is Y, any feedback
-  is appreciated." This will allow other devs to potentially save you time by not accidentally duplicating work etc...
+  is appreciated." This will allow other devs to potentially save you time by not accidentially duplicating work etc...
 - Please do not check in files that don't have real changes
 - Please do not reformat lines that you didn't have to change the code on
- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor along with the ['Trunk Check' extension](https://marketplace.visualstudio.com/items?itemName=trunk.io) (In beta for windows, WSL2 for the Linux version),
+- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor along with the ['Trunk Check' extension](https://marketplace.visualstudio.com/items?itemName=trunk.io) (In beta for windows, WSL2 for the linux version),
  because it automatically follows our indentation rules and its auto reformatting will not cause spurious changes to lines.
 - If your PR fixes a bug, mention "fixes #bugnum" somewhere in your pull request description.
 - If your other co-developers have comments on your PR please tweak as needed.
 - Please also enable "Allow edits by maintainers".
 - Please do not submit untested code.
- If you do not have the affected hardware to test your code changes adequately against regressions, please indicate this, so that contributors and community members can help test your changes.
+- If you do not have the affected hardware to test your code changes adequately against regressions, please indicate this, so that contributors and commnunity members can help test your changes.
 - If your PR gets accepted you can request a "Contributor" role in the Meshtastic Discord

 ## 🤝 Attestations
@@ -16,7 +16,8 @@ on:
        type: string

 permissions:
-  contents: read
+  contents: write
+  packages: write

 jobs:
  build-debian-src:
@@ -27,6 +28,8 @@ jobs:
        with:
          submodules: recursive
          path: meshtasticd
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}

      - name: Install deps
        shell: bash
@@ -39,8 +42,7 @@ jobs:
          sudo mk-build-deps --install --remove --tool='apt-get -o Debug::pkgProblemResolver=yes --no-install-recommends --yes' debian/control

      - name: Import GPG key
-        if: github.event_name != 'pull_request' && github.event_name != 'pull_request_target'
-        uses: crazy-max/ghaction-import-gpg@v7
+        uses: crazy-max/ghaction-import-gpg@v6
        with:
          gpg_private_key: ${{ secrets.PPA_GPG_PRIVATE_KEY }}
        id: gpg
@@ -58,11 +60,11 @@ jobs:
        run: debian/ci_pack_sdeb.sh
        env:
          SERIES: ${{ inputs.series }}
-          GPG_KEY_ID: ${{ steps.gpg.outputs.keyid || '' }}
+          GPG_KEY_ID: ${{ steps.gpg.outputs.keyid }}
          PKG_VERSION: ${{ steps.version.outputs.deb }}

      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        with:
          name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
          overwrite: true
@@ -26,6 +26,8 @@ jobs:
      - uses: actions/checkout@v6
        with:
          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}

      - name: Build ${{ inputs.platform }}
        id: build
@@ -109,7 +111,7 @@ jobs:
          echo "</details>" >> $GITHUB_STEP_SUMMARY

      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        id: upload-firmware
        with:
          name: firmware-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}
@@ -125,7 +127,7 @@ jobs:
            release/device-*.bat

      - name: Store manifests as an artifact
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        id: upload-manifest
        with:
          name: manifest-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}
@@ -4,14 +4,9 @@ on:
  workflow_dispatch:
    inputs:
      # trunk-ignore(checkov/CKV_GHA_7)
-      target:
-        type: string
-        required: false
-        description: Choose the target board, e.g. nrf52_promicro_diy_tcxo. If blank, will find available targets.
      arch:
        type: choice
        options:
-          - all
          - esp32
          - esp32s3
          - esp32c3
@@ -20,18 +15,32 @@ on:
          - rp2040
          - rp2350
          - stm32
-        description: Choose an arch to limit the search, or 'all' to search all architectures.
-        default: all
+      target:
+        type: string
+        required: false
+        description: Choose the target board, e.g. nrf52_promicro_diy_tcxo. If blank, will find available targets.
+      # find-target:
+      #   type: boolean
+      #   default: true
+      #   description: 'Find the available targets'

 permissions: read-all

 jobs:
  find-targets:
+    if: ${{ inputs.target == '' }}
    strategy:
      fail-fast: false
      matrix:
        arch:
-          - all
+          - esp32
+          - esp32s3
+          - esp32c3
+          - esp32c6
+          - nrf52840
+          - rp2040
+          - rp2350
+          - stm32
    runs-on: ubuntu-24.04
    steps:
      - uses: actions/checkout@v6
@@ -42,37 +51,14 @@ jobs:
      - run: pip install -U platformio
      - name: Generate matrix
        id: jsonStep
-        env:
-          BUILDTARGET: ${{ inputs.target }}
-          MATRIXARCH: ${{ inputs.arch }}
        run: |
          TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} --level extra)
-          if [ "$BUILDTARGET" = "" ]; then
-            echo "Name: $GITHUB_REF_NAME" >> $GITHUB_STEP_SUMMARY
-            echo "Base: $GITHUB_BASE_REF" >> $GITHUB_STEP_SUMMARY
-            echo "Arch: $MATRIXARCH" >> $GITHUB_STEP_SUMMARY
-            echo "Ref: $GITHUB_REF" >> $GITHUB_STEP_SUMMARY
-            echo "## 🎯 The following target boards are available to build:" >> $GITHUB_STEP_SUMMARY
-            echo "| Platform | Board |" >> $GITHUB_STEP_SUMMARY
-            echo "| -------- | ----- |" >> $GITHUB_STEP_SUMMARY
-            echo $TARGETS | jq -r 'sort_by(.board) | sort_by(.platform) |.[] | "| " + .platform + " | " + .board + " |" ' >> $GITHUB_STEP_SUMMARY
-          else
-            echo "We build this one:" >> $GITHUB_STEP_SUMMARY
-            ARCH=$(echo "$TARGETS" | jq --arg BUILDTARGET "$BUILDTARGET" -r '.[] | select(.board==$BUILDTARGET) | .platform')
-            echo "| Platform | Board |" >> $GITHUB_STEP_SUMMARY
-            echo "| -------- | ----- |" >> $GITHUB_STEP_SUMMARY
-            echo "| $ARCH | "$BUILDTARGET" |" >> $GITHUB_STEP_SUMMARY
-            echo "" >> $GITHUB_STEP_SUMMARY
-            if [[ "$ARCH" == "" ]]; then
-              echo "## ❌ Error: Target "$BUILDTARGET" not found!" >> $GITHUB_STEP_SUMMARY
-            else
-              echo "## ✅ Target "$BUILDTARGET" found, proceeding to build." >> $GITHUB_STEP_SUMMARY
-            fi
-            echo "You may need to refresh this page to make the built firmware appear below." >> $GITHUB_STEP_SUMMARY
-            echo "arch=$ARCH" >> $GITHUB_OUTPUT
-          fi
-    outputs:
-      arch: ${{ steps.jsonStep.outputs.arch }}
+          echo "Name: $GITHUB_REF_NAME" >> $GITHUB_STEP_SUMMARY
+          echo "Base: $GITHUB_BASE_REF" >> $GITHUB_STEP_SUMMARY
+          echo "Arch: ${{matrix.arch}}" >> $GITHUB_STEP_SUMMARY
+          echo "Ref: $GITHUB_REF" >> $GITHUB_STEP_SUMMARY
+          echo "Targets:" >> $GITHUB_STEP_SUMMARY
+          echo $TARGETS | jq -r 'sort_by(.board) |.[] | "- " + .board' >> $GITHUB_STEP_SUMMARY

  version:
    if: ${{ inputs.target != '' }}
@@ -92,16 +78,16 @@ jobs:

  build:
    if: ${{ inputs.target != '' && inputs.arch != 'native' }}
-    needs: [version, find-targets]
+    needs: [version]
    uses: ./.github/workflows/build_firmware.yml
    with:
      version: ${{ needs.version.outputs.long }}
      pio_env: ${{ inputs.target }}
-      platform: ${{ needs.find-targets.outputs.arch }}
+      platform: ${{ inputs.arch }}

  gather-artifacts:
    permissions:
-      contents: read
+      contents: write
      pull-requests: write
    runs-on: ubuntu-latest
    needs: [version, build]
@@ -112,7 +98,7 @@ jobs:
          ref: ${{github.event.pull_request.head.ref}}
          repository: ${{github.event.pull_request.head.repo.full_name}}

-      - uses: actions/download-artifact@v8
+      - uses: actions/download-artifact@v7
        with:
          path: ./
          pattern: firmware-*-*
@@ -125,7 +111,7 @@ jobs:
        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat

      - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        with:
          name: firmware-${{inputs.target}}-${{ needs.version.outputs.long }}
          overwrite: true
@@ -141,7 +127,7 @@ jobs:
            ./Meshtastic_nRF52_factory_erase*.uf2
          retention-days: 30

-      - uses: actions/download-artifact@v8
+      - uses: actions/download-artifact@v7
        with:
          pattern: firmware-*-${{ needs.version.outputs.long }}
          merge-multiple: true
@@ -160,7 +146,7 @@ jobs:
        run: zip -j -9 -r ./firmware-${{inputs.target}}-${{ needs.version.outputs.long }}.zip ./output

      - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        with:
          name: debug-elfs-${{inputs.target}}-${{ needs.version.outputs.long }}.zip
          overwrite: true
@@ -5,7 +5,7 @@ on:
  workflow_dispatch:
  push:
    branches:
-      - develop # Default branch, same as 'cron' above
+      - master
    paths:
      - debian/**
      - "*.rpkg"
@@ -16,7 +16,7 @@ on:
      - .github/workflows/hook_copr.yml

 permissions:
-  contents: read
+  contents: write
  packages: write

 jobs:
@@ -35,8 +35,8 @@ jobs:
        series:
          - jammy # 22.04 LTS
          - noble # 24.04 LTS
+          - plucky # 25.04
          - questing # 25.10
-          - resolute # 26.04 LTS
    uses: ./.github/workflows/package_ppa.yml
    with:
      ppa_repo: ppa:meshtastic/daily
@@ -37,7 +37,7 @@ on:
        value: ${{ jobs.docker-build.outputs.digest }}

 permissions:
-  contents: read
+  contents: write
  packages: write

 jobs:
@@ -50,41 +50,35 @@ jobs:
        uses: actions/checkout@v6
        with:
          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}

      - name: Get release version string
        run: |
          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
        id: version

-      - name: Set up QEMU
-        uses: docker/setup-qemu-action@v4
+      - name: Docker login
+        if: ${{ inputs.push }}
+        uses: docker/login-action@v3
        with:
-          cache-image: true
+          username: meshtastic
+          password: ${{ secrets.DOCKER_FIRMWARE_TOKEN }}
+
+      - name: Set up QEMU
+        uses: docker/setup-qemu-action@v3

      - name: Docker setup
-        uses: docker/setup-buildx-action@v4
-        with:
-          # Add Google/Amazon DockerHub mirrors to buildkit config
-          # https://docs.docker.com/build/ci/github-actions/configure-builder/#registry-mirror
-          buildkitd-config-inline: |
-            [registry."docker.io"]
-              mirrors = ["mirror.gcr.io", "public.ecr.aws"]
+        uses: docker/setup-buildx-action@v3

      - name: Sanitize platform string
        id: sanitize_platform
        # Replace slashes with underscores
        run: echo "cleaned_platform=${{ inputs.platform }}" | sed 's/\//_/g' >> $GITHUB_OUTPUT

-      - name: Docker login
-        if: ${{ inputs.push }}
-        uses: docker/login-action@v4
-        with:
-          username: meshtastic
-          password: ${{ secrets.DOCKER_FIRMWARE_TOKEN }}
-
      - name: Docker tag
        id: meta
-        uses: docker/metadata-action@v6
+        uses: docker/metadata-action@v5
        with:
          images: meshtastic/meshtasticd
          tags: |
@@ -92,7 +86,7 @@ jobs:
          flavor: latest=false

      - name: Docker build and push
-        uses: docker/build-push-action@v7
+        uses: docker/build-push-action@v6
        id: docker_variant
        with:
          context: .
@@ -103,6 +97,3 @@ jobs:
          platforms: ${{ inputs.platform }}
          build-args: |
            PIO_ENV=${{ inputs.pio_env }}
-          # Cache image layers in GitHub Actions cache to speed up subsequent builds.
-          cache-from: type=gha
-          cache-to: type=gha,mode=max
@@ -12,7 +12,7 @@ on:
        type: string

 permissions:
-  contents: read
+  contents: write
  packages: write

 jobs:
@@ -86,6 +86,8 @@ jobs:
        uses: actions/checkout@v6
        with:
          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}

      - name: Get release version string
        run: |
@@ -137,14 +139,14 @@ jobs:
        id: tags

      - name: Docker login
-        uses: docker/login-action@v4
+        uses: docker/login-action@v3
        with:
          username: meshtastic
          password: ${{ secrets.DOCKER_FIRMWARE_TOKEN }}

      - name: Docker meta (Debian)
        id: meta_debian
-        uses: docker/metadata-action@v6
+        uses: docker/metadata-action@v5
        with:
          images: meshtastic/meshtasticd
          tags: |
@@ -165,7 +167,7 @@ jobs:

      - name: Docker meta (Alpine)
        id: meta_alpine
-        uses: docker/metadata-action@v6
+        uses: docker/metadata-action@v5
        with:
          images: meshtastic/meshtasticd
          tags: |
@@ -11,7 +11,8 @@ on:
        type: string

 permissions:
-  contents: read
+  contents: write
+  packages: write

 jobs:
  build-copr-hook:
@@ -21,6 +22,8 @@ jobs:
        uses: actions/checkout@v6
        with:
          submodules: recursive
+          ref: ${{ github.ref }}
+          repository: ${{ github.repository }}

      - name: Trigger COPR build
        uses: vidplace7/copr-build@main
@@ -15,7 +15,8 @@ on:
      - "**.md"
      - version.properties

-  pull_request:
+  # Note: This is different from "pull_request". Need to specify ref when doing checkouts.
+  pull_request_target:
    branches:
      - master
      - develop
@@ -28,8 +29,6 @@ on:

  workflow_dispatch:

-permissions: read-all
-
 jobs:
  setup:
    strategy:
@@ -89,12 +88,15 @@ jobs:
      - uses: actions/checkout@v6
        with:
          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
      - name: Check ${{ matrix.check.board }}
        uses: meshtastic/gh-action-firmware@main
        with:
          pio_platform: ${{ matrix.check.platform }}
          pio_env: ${{ matrix.check.board }}
          pio_target: check
+          pio_opts: --fail-on-defect=low

  build:
    needs: [setup, version]
@@ -125,16 +127,9 @@ jobs:

  test-native:
    if: ${{ !contains(github.ref_name, 'event/') && github.repository == 'meshtastic/firmware' }}
-    permissions: # Needed for dorny/test-reporter.
-      contents: read
-      actions: read
-      checks: write
    uses: ./.github/workflows/test_native.yml

  docker:
-    permissions: # Needed for pushing to GHCR.
-      contents: read
-      packages: write
    strategy:
      fail-fast: false
      matrix:
@@ -159,6 +154,9 @@ jobs:
  gather-artifacts:
    # trunk-ignore(checkov/CKV2_GHA_1)
    if: github.repository == 'meshtastic/firmware'
+    permissions:
+      contents: write
+      pull-requests: write
    strategy:
      fail-fast: false
      matrix:
@@ -176,8 +174,11 @@ jobs:
    steps:
      - name: Checkout code
        uses: actions/checkout@v6
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}

-      - uses: actions/download-artifact@v8
+      - uses: actions/download-artifact@v7
        with:
          path: ./
          pattern: firmware-${{matrix.arch}}-*
@@ -187,7 +188,7 @@ jobs:
        run: ls -R

      - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        with:
          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
          overwrite: true
@@ -205,7 +206,7 @@ jobs:
            ./Meshtastic_nRF52_factory_erase*.uf2
          retention-days: 30

-      - uses: actions/download-artifact@v8
+      - uses: actions/download-artifact@v7
        with:
          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
          merge-multiple: true
@@ -224,13 +225,20 @@ jobs:
        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output

      - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        with:
          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
          overwrite: true
          path: ./*.elf
          retention-days: 30

+      - uses: scruplelesswizard/comment-artifact@main
+        if: ${{ github.event_name == 'pull_request' }}
+        with:
+          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          description: "Download firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
+          github-token: ${{ secrets.GITHUB_TOKEN }}
+
  shame:
    if: github.repository == 'meshtastic/firmware'
    continue-on-error: true
@@ -238,44 +246,42 @@ jobs:
    needs: [build]
    steps:
      - uses: actions/checkout@v6
-        if: github.event_name == 'pull_request'
+        if: github.event_name == 'pull_request_target'
        with:
          filter: blob:none # means we download all the git history but none of the commit (except ones with checkout like the head)
          fetch-depth: 0
      - name: Download the current manifests
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
        with:
          path: ./manifests-new/
          pattern: manifest-*
          merge-multiple: true
      - name: Upload combined manifests for later commit and global stats crunching.
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        id: upload-manifest
        with:
          name: manifests-${{ github.sha }}
          overwrite: true
          path: manifests-new/*.mt.json
      - name: Find the merge base
-        if: github.event_name == 'pull_request'
+        if: github.event_name == 'pull_request_target'
        run: echo "MERGE_BASE=$(git merge-base "origin/$base" "$head")" >> $GITHUB_ENV
        env:
          base: ${{ github.base_ref }}
          head: ${{ github.sha }}
      # Currently broken (for-loop through EVERY artifact -- rate limiting)
      # - name: Download the old manifests
-      #   if: github.event_name == 'pull_request'
+      #   if: github.event_name == 'pull_request_target'
      #   run: gh run download -R "$repo" --name "manifests-$merge_base" --dir manifest-old/
      #   env:
      #     GH_TOKEN: ${{ github.token }}
      #     merge_base: ${{ env.MERGE_BASE }}
      #     repo: ${{ github.repository }}
      # - name: Do scan and post comment
-      #   if: github.event_name == 'pull_request'
+      #   if: github.event_name == 'pull_request_target'
      #   run: python3 bin/shame.py ${{ github.event.pull_request.number }} manifests-old/ manifests-new/

  release-artifacts:
-    permissions: # Needed for 'gh release upload'.
-      contents: write
    runs-on: ubuntu-latest
    if: ${{ github.event_name == 'workflow_dispatch' && github.repository == 'meshtastic/firmware' }}
    outputs:
@@ -301,17 +307,15 @@ jobs:
        id: release_notes
        run: |
          chmod +x ./bin/generate_release_notes.py
-          NOTES=$(./bin/generate_release_notes.py ${{ needs.version.outputs.long }} --compare-ref HEAD 2>release_notes.log)
+          NOTES=$(./bin/generate_release_notes.py ${{ needs.version.outputs.long }})
          echo "notes<<EOF" >> $GITHUB_OUTPUT
          echo "$NOTES" >> $GITHUB_OUTPUT
          echo "EOF" >> $GITHUB_OUTPUT
-          echo "### Release note range" >> $GITHUB_STEP_SUMMARY
-          cat release_notes.log >> $GITHUB_STEP_SUMMARY
        env:
          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}

      - name: Create release
-        uses: softprops/action-gh-release@v3
+        uses: softprops/action-gh-release@v2
        id: create_release
        with:
          draft: true
@@ -321,14 +325,14 @@ jobs:
          body: ${{ steps.release_notes.outputs.notes }}

      - name: Download source deb
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
        with:
          pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
          merge-multiple: true
          path: ./output/debian-src

      - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
        with:
          pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
          merge-multiple: true
@@ -352,7 +356,7 @@ jobs:
          }' > firmware-${{ needs.version.outputs.long }}.json

      - name: Save Release manifest artifact
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        with:
          name: manifest-${{ needs.version.outputs.long }}
          overwrite: true
@@ -369,8 +373,6 @@ jobs:
          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}

  release-firmware:
-    permissions: # Needed for 'gh release upload'.
-      contents: write
    strategy:
      fail-fast: false
      matrix:
@@ -395,7 +397,7 @@ jobs:
        with:
          python-version: 3.x

-      - uses: actions/download-artifact@v8
+      - uses: actions/download-artifact@v7
        with:
          pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
          merge-multiple: true
@@ -412,7 +414,7 @@ jobs:
      - name: Zip firmware
        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output

-      - uses: actions/download-artifact@v8
+      - uses: actions/download-artifact@v7
        with:
          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
          merge-multiple: true
@@ -453,14 +455,14 @@ jobs:
          python-version: 3.x

      - name: Get firmware artifacts
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
        with:
          pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
          merge-multiple: true
          path: ./publish

      - name: Get manifest artifact
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
        with:
          pattern: manifest-${{ needs.version.outputs.long }}
          path: ./publish
@@ -468,7 +470,7 @@ jobs:
      - name: Generate release notes
        run: |
          chmod +x ./bin/generate_release_notes.py
-          ./bin/generate_release_notes.py ${{ needs.version.outputs.long }} --compare-ref HEAD > ./publish/release_notes.md
+          ./bin/generate_release_notes.py ${{ needs.version.outputs.long }} > ./publish/release_notes.md
        env:
          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}

@@ -0,0 +1,371 @@
+name: Merge Queue
+# Not sure how concurrency works in merge_queue, removing for now.
+# concurrency:
+#   group: merge-queue-${{ github.head_ref || github.run_id }}
+#   cancel-in-progress: true
+on:
+  # Merge group is a special trigger that is used to trigger the workflow when a merge group is created.
+  merge_group:
+
+jobs:
+  setup:
+    strategy:
+      fail-fast: true
+      matrix:
+        arch:
+          - all
+          - check
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v6
+      - uses: actions/setup-python@v6
+        with:
+          python-version: 3.x
+          cache: pip
+      - run: pip install -U platformio
+      - name: Generate matrix
+        id: jsonStep
+        run: |
+          if [[ "$GITHUB_HEAD_REF" == "" ]]; then
+            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
+          else  
+            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} --level pr)
+          fi
+          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF"
+          echo "${{matrix.arch}}=$TARGETS" >> $GITHUB_OUTPUT
+    outputs:
+      all: ${{ steps.jsonStep.outputs.all }}
+      check: ${{ steps.jsonStep.outputs.check }}
+
+  version:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v6
+      - name: Get release version string
+        run: |
+          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
+        id: version
+        env:
+          BUILD_LOCATION: local
+    outputs:
+      long: ${{ steps.version.outputs.long }}
+      deb: ${{ steps.version.outputs.deb }}
+
+  check:
+    needs: setup
+    strategy:
+      fail-fast: true
+      matrix:
+        check: ${{ fromJson(needs.setup.outputs.check) }}
+
+    runs-on: ubuntu-latest
+    if: ${{ github.event_name != 'workflow_dispatch' }}
+    steps:
+      - uses: actions/checkout@v6
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
+      - name: Check ${{ matrix.check.board }}
+        run: bin/check-all.sh ${{ matrix.check.board }}
+
+  build:
+    needs: [setup, version]
+    strategy:
+      matrix:
+        build: ${{ fromJson(needs.setup.outputs.all) }}
+    uses: ./.github/workflows/build_firmware.yml
+    with:
+      version: ${{ needs.version.outputs.long }}
+      pio_env: ${{ matrix.build.board }}
+      platform: ${{ matrix.build.platform }}
+
+  build-debian-src:
+    if: github.repository == 'meshtastic/firmware'
+    uses: ./.github/workflows/build_debian_src.yml
+    with:
+      series: UNRELEASED
+      build_location: local
+    secrets: inherit
+
+  package-pio-deps-native-tft:
+    if: ${{ github.event_name == 'workflow_dispatch' }}
+    uses: ./.github/workflows/package_pio_deps.yml
+    with:
+      pio_env: native-tft
+    secrets: inherit
+
+  test-native:
+    if: ${{ !contains(github.ref_name, 'event/') }}
+    uses: ./.github/workflows/test_native.yml
+
+  docker:
+    strategy:
+      fail-fast: false
+      matrix:
+        distro: [debian, alpine]
+        platform: [linux/amd64, linux/arm64, linux/arm/v7]
+        pio_env: [native, native-tft]
+        exclude:
+          - distro: alpine
+            platform: linux/arm/v7
+          - pio_env: native-tft
+            platform: linux/arm64
+          - pio_env: native-tft
+            platform: linux/arm/v7
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: ${{ matrix.distro }}
+      platform: ${{ matrix.platform }}
+      runs-on: ${{ contains(matrix.platform, 'arm') && 'ubuntu-24.04-arm' || 'ubuntu-24.04' }}
+      pio_env: ${{ matrix.pio_env }}
+      push: false
+
+  gather-artifacts:
+    # trunk-ignore(checkov/CKV2_GHA_1)
+    permissions:
+      contents: write
+      pull-requests: write
+    strategy:
+      fail-fast: false
+      matrix:
+        arch:
+          - esp32
+          - esp32s3
+          - esp32c3
+          - esp32c6
+          - nrf52840
+          - rp2040
+          - rp2350
+          - stm32
+    runs-on: ubuntu-latest
+    needs: [version, build]
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v6
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - uses: actions/download-artifact@v7
+        with:
+          path: ./
+          pattern: firmware-${{matrix.arch}}-*
+          merge-multiple: true
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
+      - name: Move files up
+        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
+
+      - name: Repackage in single firmware zip
+        uses: actions/upload-artifact@v6
+        with:
+          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          overwrite: true
+          path: |
+            ./firmware-*.bin
+            ./firmware-*.uf2
+            ./firmware-*.hex
+            ./firmware-*.zip
+            ./device-*.sh
+            ./device-*.bat
+            ./littlefs-*.bin
+            ./bleota*bin
+            ./Meshtastic_nRF52_factory_erase*.uf2
+          retention-days: 30
+
+      - uses: actions/download-artifact@v7
+        with:
+          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          merge-multiple: true
+          path: ./output
+
+      # For diagnostics
+      - name: Show artifacts
+        run: ls -lR
+
+      - name: Device scripts permissions
+        run: |
+          chmod +x ./output/device-install.sh || true
+          chmod +x ./output/device-update.sh || true
+
+      - name: Zip firmware
+        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
+
+      - name: Repackage in single elfs zip
+        uses: actions/upload-artifact@v6
+        with:
+          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          overwrite: true
+          path: ./*.elf
+          retention-days: 30
+
+      - uses: scruplelesswizard/comment-artifact@main
+        if: ${{ github.event_name == 'pull_request' }}
+        with:
+          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          description: "Download firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
+          github-token: ${{ secrets.GITHUB_TOKEN }}
+
+  release-artifacts:
+    runs-on: ubuntu-latest
+    if: ${{ github.event_name == 'workflow_dispatch' }}
+    outputs:
+      upload_url: ${{ steps.create_release.outputs.upload_url }}
+    needs:
+      - version
+      - gather-artifacts
+      - build-debian-src
+      - package-pio-deps-native-tft
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v6
+
+      - name: Create release
+        uses: softprops/action-gh-release@v2
+        id: create_release
+        with:
+          draft: true
+          prerelease: true
+          name: Meshtastic Firmware ${{ needs.version.outputs.long }} Alpha
+          tag_name: v${{ needs.version.outputs.long }}
+          body: |
+            Autogenerated by github action, developer should edit as required before publishing...
+
+      - name: Download source deb
+        uses: actions/download-artifact@v7
+        with:
+          pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
+          merge-multiple: true
+          path: ./output/debian-src
+
+      - name: Download `native-tft` pio deps
+        uses: actions/download-artifact@v7
+        with:
+          pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
+          merge-multiple: true
+          path: ./output/pio-deps-native-tft
+
+      - name: Zip Linux sources
+        working-directory: output
+        run: |
+          zip -j -9 -r ./meshtasticd-${{ needs.version.outputs.deb }}-src.zip ./debian-src
+          zip -9 -r ./platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip ./pio-deps-native-tft
+
+      # For diagnostics
+      - name: Display structure of downloaded files
+        run: ls -lR
+
+      - name: Add Linux sources to GtiHub Release
+        # Only run when targeting master branch with workflow_dispatch
+        if: ${{ github.ref_name == 'master' }}
+        run: |
+          gh release upload v${{ needs.version.outputs.long }} ./output/meshtasticd-${{ needs.version.outputs.deb }}-src.zip
+          gh release upload v${{ needs.version.outputs.long }} ./output/platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+
+  release-firmware:
+    strategy:
+      fail-fast: false
+      matrix:
+        arch:
+          - esp32
+          - esp32s3
+          - esp32c3
+          - esp32c6
+          - nrf52840
+          - rp2040
+          - rp2350
+          - stm32
+    runs-on: ubuntu-latest
+    if: ${{ github.event_name == 'workflow_dispatch' }}
+    needs: [release-artifacts, version]
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v6
+
+      - name: Setup Python
+        uses: actions/setup-python@v6
+        with:
+          python-version: 3.x
+
+      - uses: actions/download-artifact@v7
+        with:
+          pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          merge-multiple: true
+          path: ./output
+
+      - name: Display structure of downloaded files
+        run: ls -lR
+
+      - name: Device scripts permissions
+        run: |
+          chmod +x ./output/device-install.sh || true
+          chmod +x ./output/device-update.sh || true
+
+      - name: Zip firmware
+        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
+
+      - uses: actions/download-artifact@v7
+        with:
+          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          merge-multiple: true
+          path: ./elfs
+
+      - name: Zip debug elfs
+        run: zip -j -9 -r ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./elfs
+
+      # For diagnostics
+      - name: Display structure of downloaded files
+        run: ls -lR
+
+      - name: Add bins and debug elfs to GitHub Release
+        # Only run when targeting master branch with workflow_dispatch
+        if: ${{ github.ref_name == 'master' }}
+        run: |
+          gh release upload v${{ needs.version.outputs.long }} ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
+          gh release upload v${{ needs.version.outputs.long }} ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+
+  publish-firmware:
+    runs-on: ubuntu-24.04
+    if: ${{ github.event_name == 'workflow_dispatch' }}
+    needs: [release-firmware, version]
+    env:
+      targets: |-
+        esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v6
+
+      - name: Setup Python
+        uses: actions/setup-python@v6
+        with:
+          python-version: 3.x
+
+      - uses: actions/download-artifact@v7
+        with:
+          pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
+          merge-multiple: true
+          path: ./publish
+
+      - name: Publish firmware to meshtastic.github.io
+        uses: peaceiris/actions-gh-pages@v4
+        env:
+          # On event/* branches, use the event name as the destination prefix
+          DEST_PREFIX: ${{ contains(github.ref_name, 'event/') && format('{0}/', github.ref_name) || '' }}
+        with:
+          deploy_key: ${{ secrets.DIST_PAGES_DEPLOY_KEY }}
+          external_repository: meshtastic/meshtastic.github.io
+          publish_branch: master
+          publish_dir: ./publish
+          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ needs.version.outputs.long }}
+          keep_files: true
+          user_name: github-actions[bot]
+          user_email: github-actions[bot]@users.noreply.github.com
+          commit_message: ${{ needs.version.outputs.long }}
+          enable_jekyll: true
@@ -38,7 +38,7 @@ jobs:

      - name: Apply quality label if needed
        if: steps.quality.outputs.response != '' && steps.quality.outputs.response != 'ok'
-        uses: actions/github-script@v9
+        uses: actions/github-script@v8
        env:
          QUALITY_LABEL: ${{ steps.quality.outputs.response }}
        with:
@@ -80,7 +80,7 @@ jobs:
      # ─────────────────────────────────────────────────────────────────────────
      - name: Determine if completeness check should be skipped
        if: steps.quality.outputs.response == 'ok' || steps.quality.outputs.response == ''
-        uses: actions/github-script@v9
+        uses: actions/github-script@v8
        id: check-skip
        with:
          script: |
@@ -134,7 +134,7 @@ jobs:

      - name: Process analysis result
        if: (steps.quality.outputs.response == 'ok' || steps.quality.outputs.response == '') && steps.check-skip.outputs.should_skip != 'true' && steps.analysis.outputs.response != ''
-        uses: actions/github-script@v9
+        uses: actions/github-script@v8
        id: process
        env:
          AI_RESPONSE: ${{ steps.analysis.outputs.response }}
@@ -174,7 +174,7 @@ jobs:

      - name: Apply triage label
        if: steps.process.outputs.label != '' && steps.process.outputs.label != 'none'
-        uses: actions/github-script@v9
+        uses: actions/github-script@v8
        env:
          LABEL_NAME: ${{ steps.process.outputs.label }}
        with:
@@ -200,7 +200,7 @@ jobs:

      - name: Comment on issue
        if: steps.process.outputs.should_comment == 'true'
-        uses: actions/github-script@v9
+        uses: actions/github-script@v8
        env:
          COMMENT_BODY: ${{ steps.process.outputs.comment_body }}
        with:
@@ -22,7 +22,7 @@ jobs:
      # Step 1: Check if PR already has automation/type labels (skip if so)
      # ─────────────────────────────────────────────────────────────────────────
      - name: Check existing labels
-        uses: actions/github-script@v9
+        uses: actions/github-script@v8
        id: check-labels
        with:
          script: |
@@ -58,7 +58,7 @@ jobs:

      - name: Apply quality label if needed
        if: steps.check-labels.outputs.skip_all != 'true' && steps.quality.outputs.response != '' && steps.quality.outputs.response != 'ok'
-        uses: actions/github-script@v9
+        uses: actions/github-script@v8
        id: quality-label
        env:
          QUALITY_LABEL: ${{ steps.quality.outputs.response }}
@@ -113,7 +113,7 @@ jobs:

      - name: Apply type label
        if: steps.check-labels.outputs.skip_all != 'true' && steps.check-labels.outputs.has_type_label != 'true' && steps.classify.outputs.response != ''
-        uses: actions/github-script@v9
+        uses: actions/github-script@v8
        env:
          TYPE_LABEL: ${{ steps.classify.outputs.response }}
        with:
@@ -18,7 +18,8 @@ on:
        type: string

 permissions:
-  contents: read
+  contents: write
+  packages: write

 jobs:
  build-debian-src:
@@ -57,7 +58,7 @@ jobs:
        id: version

      - name: Download artifacts
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
        with:
          name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
          merge-multiple: true
@@ -16,7 +16,8 @@ on:
        type: string

 permissions:
-  contents: read
+  contents: write
+  packages: write

 jobs:
  pkg-pio-libdeps:
@@ -26,6 +27,8 @@ jobs:
        uses: actions/checkout@v6
        with:
          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}

      - name: Setup Python
        uses: actions/setup-python@v6
@@ -51,19 +54,9 @@ jobs:
          PLATFORMIO_LIBDEPS_DIR: pio/libdeps
          PLATFORMIO_PACKAGES_DIR: pio/packages
          PLATFORMIO_CORE_DIR: pio/core
-          PLATFORMIO_SETTING_ENABLE_TELEMETRY: 0
-          PLATFORMIO_SETTING_CHECK_PLATFORMIO_INTERVAL: 3650
-          PLATFORMIO_SETTING_CHECK_PRUNE_SYSTEM_THRESHOLD: 10240
-
-      - name: Mangle platformio cache
-        # Add "1" to epoch-timestamps of all downloads in the cache.
-        # This is a hack to prevent internet access at build-time.
-        run: |
-          cp pio/core/.cache/downloads/usage.db pio/core/.cache/downloads/usage.db.bak
-          jq -c 'with_entries(.value |= (. | tostring + "1" | tonumber))' pio/core/.cache/downloads/usage.db.bak > pio/core/.cache/downloads/usage.db

      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        with:
          name: platformio-deps-${{ inputs.pio_env }}-${{ steps.version.outputs.long }}
          overwrite: true
@@ -5,8 +5,6 @@ on:
    secrets:
      PPA_GPG_PRIVATE_KEY:
        required: true
-      PPA_SFTP_PRIVATE_KEY:
-        required: true
    inputs:
      ppa_repo:
        description: Meshtastic PPA to target
@@ -18,7 +16,8 @@ on:
        type: string

 permissions:
-  contents: read
+  contents: write
+  packages: write

 jobs:
  build-debian-src:
@@ -29,7 +28,6 @@ jobs:
      build_location: ppa

  package-ppa:
-    if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
    runs-on: ubuntu-24.04
    needs: build-debian-src
    steps:
@@ -38,15 +36,17 @@ jobs:
        with:
          submodules: recursive
          path: meshtasticd
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}

      - name: Install deps
        shell: bash
        run: |
          sudo apt-get update -y --fix-missing
-          sudo apt-get install -y dput openssh-client
+          sudo apt-get install -y dput

      - name: Import GPG key
-        uses: crazy-max/ghaction-import-gpg@v7
+        uses: crazy-max/ghaction-import-gpg@v6
        with:
          gpg_private_key: ${{ secrets.PPA_GPG_PRIVATE_KEY }}
        id: gpg
@@ -60,7 +60,7 @@ jobs:
        id: version

      - name: Download artifacts
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
        with:
          name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
          merge-multiple: true
@@ -68,42 +68,7 @@ jobs:
      - name: Display structure of downloaded files
        run: ls -lah

-      - name: Trust Launchpad's SSH key
+      - name: Publish with dput
+        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
        run: |
-          mkdir -p ~/.ssh
-          ssh-keyscan -H ppa.launchpad.net >> ~/.ssh/known_hosts
-
-      - name: Setup dput config
-        env:
-          ppa_login: meshtasticorg
-        run: |
-          sudo tee /etc/meshtastic-dput.cf >/dev/null <<EOF
-          [ppa]
-          fqdn                    = ppa.launchpad.net
-          method                  = ftp
-          incoming                = ~%(ppa)s
-          login                   = anonymous
-
-          [ssh-ppa]
-          fqdn                    = ppa.launchpad.net
-          method                  = sftp
-          incoming                = ~%(ssh-ppa)s
-          login                   = ${ppa_login}
-          EOF
-
-      - name: Import SSH key
-        uses: webfactory/ssh-agent@v0.10.0
-        with:
-          ssh-private-key: ${{ secrets.PPA_SFTP_PRIVATE_KEY }}
-        id: ssh
-
-      - name: Publish with dput (sftp)
-        timeout-minutes: 30 # dput is terrible, sometimes runs 'forever'
-        env:
-          up_ppa_repo: ${{ inputs.ppa_repo }}
-          up_series: ${{ inputs.series }}
-          up_version: ${{ steps.version.outputs.deb }}
-        run: >
-          dput -c /etc/meshtastic-dput.cf
-          ssh-${up_ppa_repo}
-          meshtasticd_${up_version}~${up_series}_source.changes
+          dput ${{ inputs.ppa_repo }} meshtasticd_${{ steps.version.outputs.deb }}~${{ inputs.series }}_source.changes
@@ -13,7 +13,7 @@ jobs:
    runs-on: ubuntu-latest
    steps:
      - name: Check for PR labels
-        uses: actions/github-script@v9
+        uses: actions/github-script@v8
        with:
          script: |
            const labels = context.payload.pull_request.labels.map(label => label.name);
@@ -50,7 +50,7 @@ jobs:

      - name: Download test artifacts
        if: needs.native-tests.result != 'skipped'
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
        with:
          name: platformio-test-report-${{ steps.version.outputs.long }}
          merge-multiple: true
@@ -177,7 +177,7 @@ jobs:

      - name: Comment test results on PR
        if: github.event_name == 'pull_request' && needs.native-tests.result != 'skipped'
-        uses: actions/github-script@v9
+        uses: actions/github-script@v8
        with:
          script: |
            const fs = require('fs');
@@ -23,8 +23,8 @@ jobs:
        series:
          - jammy # 22.04 LTS
          - noble # 24.04 LTS
+          - plucky # 25.04
          - questing # 25.10
-          - resolute # 26.04 LTS
    uses: ./.github/workflows/package_ppa.yml
    with:
      ppa_repo: |-
@@ -33,7 +33,7 @@ jobs:

      # step 3
      - name: save report as pipeline artifact
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        with:
          name: report.sarif
          overwrite: true
@@ -17,7 +17,7 @@ jobs:

    steps:
      - name: Stale PR+Issues
-        uses: actions/stale@v10.2.0
+        uses: actions/stale@v10.1.1
        with:
          days-before-stale: 45
          stale-issue-message: This issue has not had any comment or update in the last month. If it is still relevant, please post update comments. If no comments are made, this issue will be closed automagically in 7 days.
@@ -16,6 +16,8 @@ jobs:
    steps:
      - uses: actions/checkout@v6
        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
          submodules: recursive

      - name: Setup native build
@@ -57,7 +59,7 @@ jobs:
        id: version

      - name: Save coverage information
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        if: always() # run this step even if previous step failed
        with:
          name: lcov-coverage-info-native-simulator-test-${{ steps.version.outputs.long }}
@@ -70,6 +72,8 @@ jobs:
    steps:
      - uses: actions/checkout@v6
        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
          submodules: recursive

      - name: Setup native build
@@ -90,7 +94,7 @@ jobs:

      - name: Save test results
        if: always() # run this step even if previous step failed
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        with:
          name: platformio-test-report-${{ steps.version.outputs.long }}
          overwrite: true
@@ -104,7 +108,7 @@ jobs:
          sed -i -e "s#${PWD}#.#" coverage_tests.info # Make paths relative.

      - name: Save coverage information
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        if: always() # run this step even if previous step failed
        with:
          name: lcov-coverage-info-native-platformio-tests-${{ steps.version.outputs.long }}
@@ -124,26 +128,29 @@ jobs:
    if: always()
    steps:
      - uses: actions/checkout@v6
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}

      - name: Get release version string
        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
        id: version

      - name: Download test artifacts
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
        with:
          name: platformio-test-report-${{ steps.version.outputs.long }}
          merge-multiple: true

      - name: Test Report
-        uses: dorny/test-reporter@v3.0.0
+        uses: dorny/test-reporter@v2.5.0
        with:
          name: PlatformIO Tests
          path: testreport.xml
          reporter: java-junit

      - name: Download coverage artifacts
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
        with:
          pattern: lcov-coverage-info-native-*-${{ steps.version.outputs.long }}
          path: code-coverage-report
@@ -156,7 +163,7 @@ jobs:
          genhtml --quiet --legend --prefix "${PWD}" code-coverage-report/coverage_src.info --output-directory code-coverage-report

      - name: Save Code Coverage Report
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        with:
          name: code-coverage-report-${{ steps.version.outputs.long }}
          path: code-coverage-report
@@ -52,7 +52,7 @@ jobs:
          node-version: 24

      - name: Setup pnpm
-        uses: pnpm/action-setup@v6
+        uses: pnpm/action-setup@v4
        with:
          version: latest

@@ -6,7 +6,7 @@ permissions: read-all
 jobs:
  update-protobufs:
    runs-on: ubuntu-latest
-    permissions: # Needed for peter-evans/create-pull-request.
+    permissions:
      contents: write
      pull-requests: write
    steps:
@@ -4,31 +4,31 @@ cli:
 plugins:
  sources:
    - id: trunk
-      ref: v1.7.6
+      ref: v1.7.4
      uri: https://github.com/trunk-io/plugins
 lint:
  enabled:
-    - checkov@3.2.517
-    - renovate@43.110.9
+    - checkov@3.2.501
+    - renovate@43.10.3
    - prettier@3.8.1
-    - trufflehog@3.94.3
+    - trufflehog@3.93.3
    - yamllint@1.38.0
-    - bandit@1.9.4
-    - trivy@0.69.3
+    - bandit@1.9.3
+    - trivy@0.69.1
    - taplo@0.10.0
-    - ruff@0.15.9
-    - isort@8.0.1
-    - markdownlint@0.48.0
+    - ruff@0.15.1
+    - isort@7.0.0
+    - markdownlint@0.47.0
    - oxipng@10.1.0
-    - svgo@4.0.1
-    - actionlint@1.7.12
+    - svgo@4.0.0
+    - actionlint@1.7.10
    - flake8@7.3.0
    - hadolint@2.14.0
    - shfmt@3.6.0
    - shellcheck@0.11.0
-    - black@26.3.1
+    - black@26.1.0
    - git-diff-check
-    - gitleaks@8.30.1
+    - gitleaks@8.30.0
    - clang-format@16.0.3
  ignore:
    - linters: [ALL]
@@ -1,26 +0,0 @@
-# Lightweight container for running native PlatformIO tests on non-Linux hosts
-FROM python:3.14-slim-trixie
-
-ENV DEBIAN_FRONTEND=noninteractive
-ENV PIP_ROOT_USER_ACTION=ignore
-
-# hadolint ignore=DL3008
-RUN apt-get update && apt-get install --no-install-recommends -y \
-        g++ git ca-certificates pkg-config \
-        libgpiod-dev libyaml-cpp-dev libbluetooth-dev libi2c-dev libuv1-dev \
-        libusb-1.0-0-dev libulfius-dev liborcania-dev libssl-dev \
-        libx11-dev libinput-dev libxkbcommon-x11-dev libsqlite3-dev libsdl2-dev \
-    && apt-get clean && rm -rf /var/lib/apt/lists/* \
-    && pip install --no-cache-dir platformio==6.1.19 \
-        && useradd --create-home --shell /usr/sbin/nologin meshtastic
-
-WORKDIR /firmware
-RUN chown -R meshtastic:meshtastic /firmware
-
-HEALTHCHECK --interval=30s --timeout=5s --start-period=10s --retries=3 \
-    CMD platformio --version || exit 1
-
-USER meshtastic
-
-# Run tests by default; override with docker run args for specific filters
-CMD ["platformio", "test", "-e", "coverage", "-v"]
@@ -23,4 +23,4 @@ for BOARD in $BOARDS; do
 	CHECK="${CHECK} -e ${BOARD}"
 done

-pio check --flags "-DAPP_VERSION=${APP_VERSION} --suppressions-list=suppressions.txt --inline-suppr" $CHECK --skip-packages --pattern="src/" --fail-on-defect=low --fail-on-defect=medium --fail-on-defect=high
+pio check --flags "-DAPP_VERSION=${APP_VERSION} --suppressions-list=suppressions.txt --inline-suppr" $CHECK --skip-packages --pattern="src/" --fail-on-defect=medium --fail-on-defect=high
@@ -187,7 +187,6 @@ Logging:
  LogLevel: info # debug, info, warn, error
 #  TraceFile: /var/log/meshtasticd.json
 #  JSONFile: /packets.json # File location for JSON output of decoded packets
-#  JSONFileRotate: 60 # Rotate JSON file every N minutes, or 0 for no rotation
 #  JSONFilter: position # filter for packets to save to JSON file
 #  AsciiLogs: true     # default if not specified is !isatty() on stdout

@@ -215,4 +214,3 @@ General:
  AvailableDirectory: /etc/meshtasticd/available.d/
 #  MACAddress: AA:BB:CC:DD:EE:FF
 #  MACAddressSource: eth0
-#  APIPort: 4403
@@ -1,9 +1,3 @@
-Meta:
-  name: BananaPi-BPI-R4-sx1262
-  support: community
-  compatible:
-    - bananapi_bpi-r4 # OpenWrt target
-
 Lora:
  Module: sx1262  # BananaPi-BPI-R4 SPI via 26p GPIO Header
 ##  CS: 28
@@ -1,10 +1,4 @@
 ##  https://www.mikroe.com/lr-iot-click
-Meta:
-  name: OpenWRT One mikroBUS LR-IOT-CLICK
-  support: community
-  compatible:
-    - openwrt_one # OpenWrt target
-
 Lora:
  Module: lr1110  # OpenWRT ONE mikroBUS with LR-IOT-CLICK
 #  CS: 25
@@ -1,9 +1,3 @@
-Meta:
-  name: OpenWRT One mikroBUS sx1262
-  support: community
-  compatible:
-    - openwrt_one # OpenWrt target
-
 Lora:
  Module: sx1262
  IRQ: 10
@@ -1,28 +0,0 @@
-# meshtasticd configuration files
-
-This directory contains YAML configuration files for meshtasticd. Each file describes a specific hardware configuration, including the LoRa module and pin assignments. These configurations are used by meshtasticd to correctly interface with the hardware.
-
-## Metadata structure
-
-Each configuration file includes a `Meta` section that provides information about the configuration.
-This configuration is consumed by configuration-selection tools.
-
-```yaml
-Meta:
-  name: MeshAdv-Pi E22-900M30S # A unique identifier for this configuration.
-  support: community # community, official, or deprecated; determined by Meshtastic Leads.
-  compatible: # A list of compatible products or platforms.
-    - raspberry-pi
-```
-`name`: A unique identifier for the configuration, typically reflecting the hardware it supports.
-
-`support`: Indicates the level of support for this configuration. It can be one of the following:
-
- `community`: Supported by the Meshtastic community. Meshtastic Members may not possess, or have not tested this configuration.
- `official`: Fully supported by Meshtastic. Meshtastic Members have tested and verified this configuration.
- `deprecated`: No longer recommended for deployment by Meshtastic.
-
-`compatible`: A list of compatible products or platforms that can use this configuration.
-This will vary depending on the intended use case / platform.
-Multiple compatible entries can be included. E.g. Armbian `BOARD` value or OpenWrt `TARGET` value.
-These tags can be consumed by different configuration-selection tools, filtering based upon their platform/etc.
@@ -1,9 +1,3 @@
-Meta:
-  name: Waveshare 1.44inch LCD HAT
-  support: community
-  compatible:
-    - raspberry-pi
-
 ### Waveshare 1.44inch LCD HAT
 Display:
  Panel: ST7735S
@@ -1,9 +1,3 @@
-Meta:
-  name: Waveshare 2.8inch LCD HAT
-  support: community
-  compatible:
-    - raspberry-pi
-
 Display:

 ### Waveshare 2.8inch RPi LCD
@@ -1,30 +0,0 @@
---
-Lora:
-## Ebyte E80-900M22S
-## This is a bit experimental
-## 
-##
-  Module: lr1121
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO3_TCXO_VOLTAGE: 1.8
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1
-
-
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
-  
-rfswitch_table:
-  pins: [DIO5, DIO6, DIO7]
-  MODE_STBY: [LOW, LOW, LOW]
-  MODE_RX: [LOW, HIGH, LOW]
-  MODE_TX: [HIGH, HIGH, LOW]
-  MODE_TX_HP: [HIGH, LOW, LOW]
-  MODE_TX_HF: [LOW, LOW, LOW]
-  MODE_GNSS: [LOW, LOW, HIGH]
-  MODE_WIFI: [LOW, LOW, LOW]
-
-General:
-  MACAddressSource: eth0
@@ -1,46 +0,0 @@
---
-Lora:
-## Ebyte E80-900M22S
-## This is a bit experimental
-## 
-##
-  Module: lr1121
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO3_TCXO_VOLTAGE: 1.8
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1
-
-
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
-  
-rfswitch_table:
-  pins:
-    - DIO5
-    - DIO6
-  MODE_STBY:
-    - LOW
-    - LOW
-  MODE_RX:
-    - HIGH
-    - LOW
-  MODE_TX:
-    - HIGH
-    - HIGH
-  MODE_TX_HP:
-    - LOW
-    - HIGH
-  MODE_TX_HF:
-    - LOW
-    - LOW
-  MODE_GNSS:
-    - LOW
-    - LOW
-  MODE_WIFI:
-    - LOW
-    - LOW
-
-General:
-  MACAddressSource: eth0
@@ -1,22 +1,20 @@
---
-Meta:
-  name: Femtofox Ebyte E80-900M22S with TCXO
-  support: community
-  compatible:
-    - luckfox-pico-mini # Armbian
-
-Lora:
-## Ebyte E80-900M22S
-## This is a bit experimental
-## 
-##
-  Module: lr1121
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO3_TCXO_VOLTAGE: 1.8
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1
-
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
+---
+Lora:
+## Ebyte E80-900M22S
+## This is a bit experimental
+## 
+##
+  Module: lr1121
+  gpiochip: 1 # subtract 32 from the gpio numbers
+  DIO3_TCXO_VOLTAGE: 1.8
+  CS: 16 #pin6 / GPIO48 1C0
+  IRQ: 23  #pin17 / GPIO55 1C7
+  Busy: 22 #pin16 / GPIO54 1C6
+  Reset: 25 #pin13 / GPIO57 1D1
+
+
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
+  spiSpeed: 2000000
+  
+General:
+  MACAddressSource: eth0
@@ -1,24 +1,21 @@
---
-Meta:
-  name: Femtofox SX1262 TCXO
-  support: community
-  compatible:
-    - luckfox-pico-mini # Armbian
-
-Lora:
-## Ebyte E22-900M30S, E22-900M22S with or without external RF switching setup
-## HT-RA62 (Has internal switching, but whatever)
-## Seeed WIO SX1262 (already has TXEN-DIO2 link, but needs RXEN)
-## Will work with any module with or without RF switching, and with TCXO
-  Module: sx1262
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1
-  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
-#  TXen: bridge to DIO2 on E22 module
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
+---
+Lora:
+## Ebyte E22-900M30S, E22-900M22S with or without external RF switching setup
+## HT-RA62 (Has internal switching, but whatever)
+## Seeed WIO SX1262 (already has TXEN-DIO2 link, but needs RXEN)
+## Will work with any module with or without RF switching, and with TCXO
+  Module: sx1262
+  gpiochip: 1 # subtract 32 from the gpio numbers
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true
+  CS: 16 #pin6 / GPIO48 1C0
+  IRQ: 23  #pin17 / GPIO55 1C7
+  Busy: 22 #pin16 / GPIO54 1C6
+  Reset: 25 #pin13 / GPIO57 1D1
+  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
+#  TXen: bridge to DIO2 on E22 module
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
+  spiSpeed: 2000000
+  
+General:
+  MACAddressSource: eth0
@@ -1,24 +1,21 @@
---
-Meta:
-  name: Femtofox SX1262 XTAL
-  support: community
-  compatible:
-    - luckfox-pico-mini # Armbian
-
-Lora:
-## Ebyte E22-900MM22S with no external RF switching setup
-## Waveshare SX126X XXXM, AI Thinker RA-01SH
-## Will work with any module with or without RF switching and no TCXO
-
-  Module: sx1262  
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: false
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1 
-  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
-#  TXen: bridge to DIO2 on E22 module
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
+---
+Lora:
+## Ebyte E22-900MM22S with no external RF switching setup
+## Waveshare SX126X XXXM, AI Thinker RA-01SH
+## Will work with any module with or without RF switching and no TCXO
+
+  Module: sx1262  
+  gpiochip: 1 # subtract 32 from the gpio numbers
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: false
+  CS: 16 #pin6 / GPIO48 1C0
+  IRQ: 23  #pin17 / GPIO55 1C7
+  Busy: 22 #pin16 / GPIO54 1C6
+  Reset: 25 #pin13 / GPIO57 1D1 
+  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
+#  TXen: bridge to DIO2 on E22 module
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
+  spiSpeed: 2000000
+
+General:
+  MACAddressSource: eth0
@@ -1,30 +0,0 @@
---
-Lora:
-## Ebyte E80-900M22S
-## This is a bit experimental
-## 
-##
-  Module: lr1121
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO3_TCXO_VOLTAGE: 1.8
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1
-
-
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
-  
-rfswitch_table:
-  pins: [DIO5, DIO6, DIO7]
-  MODE_STBY: [LOW, LOW, LOW]
-  MODE_RX: [LOW, LOW, LOW]
-  MODE_TX: [LOW, HIGH, LOW]
-  MODE_TX_HP: [HIGH, LOW, LOW]
-  # MODE_TX_HF: []
-  # MODE_GNSS: []
-  MODE_WIFI: [LOW, LOW, LOW]
-
-General:
-  MACAddressSource: eth0
@@ -1,9 +1,3 @@
-Meta:
-  name: Adafruit RFM9x
-  support: deprecated
-  compatible:
-    - raspberry-pi
-
 Lora:
  Module: RF95  # Adafruit RFM9x
  Reset: 25
@@ -1,11 +1,5 @@
 # MeshAdv-Pi E22-900M30S
 # https://github.com/chrismyers2000/MeshAdv-Pi-Hat
-Meta:
-  name: MeshAdv-Pi E22-900M30S
-  support: community
-  compatible:
-    - raspberry-pi
-
 Lora:
  Module: sx1262
  CS: 21
@@ -1,11 +1,5 @@
 # MeshAdv Mini E22-900M22S
 # https://github.com/chrismyers2000/MeshAdv-Mini
-Meta:
-  name: MeshAdv Mini E22-900M22S
-  support: community
-  compatible:
-    - raspberry-pi
-
 Lora:
  Module: sx1262  # Ebyte E22-900M22S 
  CS: 8
@@ -1,20 +1,11 @@
-Meta:
-  name: RAK6421 + RAK13300 Slot 1
-  support: official
-  compatible:
-    - raspberry-pi
-
 Lora:

-  ### RAK13300 in Slot 1
+  ### RAK13300in Slot 1
  Module: sx1262
  IRQ: 22 #IO6
  Reset: 16 # IO4
  Busy: 24 # IO5
  # Ant_sw: 13 # IO3 
-  Enable_Pins:
-    - 12
-    - 13
  DIO3_TCXO_VOLTAGE: true
  DIO2_AS_RF_SWITCH: true
  spidev: spidev0.0
@@ -1,17 +1,8 @@
-Meta:
-  name: RAK6421 + RAK13300 Slot 2
-  support: official
-  compatible:
-    - raspberry-pi
-
 Lora:
-  ### RAK13300 in Slot 2 pins
+  ### RAK13300in Slot 2 pins
  IRQ: 18 #IO6
  Reset: 24 # IO4
  Busy: 19 # IO5
  # Ant_sw: 23 # IO3 
-  Enable_Pins:
-    - 26
-    - 23
  spidev: spidev0.1
  # CS: 7
@@ -1,22 +0,0 @@
-Meta:
-  name: RAK6421 + RAK13302 Slot 1
-  support: official
-  compatible:
-    - raspberry-pi
-
-Lora:
-
-  ### RAK13302 in Slot 1
-  Module: sx1262
-  IRQ: 22 #IO6
-  Reset: 16 # IO4
-  Busy: 24 # IO5
-  # Ant_sw: 13 # IO3 
-  Enable_Pins:
-    - 12
-    - 13
-  DIO3_TCXO_VOLTAGE: true
-  DIO2_AS_RF_SWITCH: true
-  spidev: spidev0.0
-  # CS: 8
-  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]
@@ -1,18 +0,0 @@
-Meta:
-  name: RAK6421 + RAK13302 Slot 2
-  support: official
-  compatible:
-    - raspberry-pi
-
-Lora:
-  ### RAK13302 in Slot 2 pins
-  IRQ: 18 #IO6
-  Reset: 24 # IO4
-  Busy: 19 # IO5
-  # Ant_sw: 23 # IO3 
-  Enable_Pins:
-    - 26
-    - 23
-  spidev: spidev0.1
-  # CS: 7
-  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]
@@ -1,39 +0,0 @@
-# MeshAdv-Pi E22-900M30S
-# https://github.com/chrismyers2000/MeshAdv-Pi-Hat
-Meta:
-  name: MeshAdv-Pi E22-900M30S
-  support: community
-  compatible:
-    - ebyte-ecb41-pge # Armbian
-
-Lora:
-  Module: sx1262
-  CS: # GPIO0_A1 (physical 40)
-    pin: 1
-    gpiochip: 0
-    line: 1
-  IRQ: # GPIO0_A3 (physical 36)
-    pin: 3
-    gpiochip: 0
-    line: 3
-  Busy: # GPIO0_A0 (physical 38)
-    pin: 0
-    gpiochip: 0
-    line: 0
-  Reset: # GPIO0_B4 (physical 12)
-    pin: 12
-    gpiochip: 0
-    line: 12
-  TXen: # GPIO1_D1 (physical 33)
-    pin: 57
-    gpiochip: 1
-    line: 25
-  RXen: # GPIO1_B3 (physical 32)
-    pin: 43
-    gpiochip: 1
-    line: 11
-  DIO3_TCXO_VOLTAGE: true
-  # Only for E22-900M33S:
-  # Limit the output power to 8 dBm
-  # SX126X_MAX_POWER: 8
-  spidev: spidev0.0
@@ -1,33 +0,0 @@
-# MeshAdv Mini E22-900M22S
-# https://github.com/chrismyers2000/MeshAdv-Mini
-Meta:
-  name: MeshAdv Mini E22-900M22S
-  support: community
-  compatible:
-    - ebyte-ecb41-pge # Armbian
-
-Lora:
-  Module: sx1262 # Ebyte E22-900M22S
-  CS: # GPIO0_B6 (physical 24, SPI1_CSN0)
-    pin: 14
-    gpiochip: 0
-    line: 14
-  IRQ: # GPIO0_A3 (physical 36)
-    pin: 3
-    gpiochip: 0
-    line: 3
-  Busy: # GPIO0_A0 (physical 38)
-    pin: 0
-    gpiochip: 0
-    line: 0
-  Reset: # GPIO1_C3 (physical 18)
-    pin: 51
-    gpiochip: 1
-    line: 19
-  RXen: # GPIO1_B3 (physical 32)
-    pin: 43
-    gpiochip: 1
-    line: 11
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  spidev: spidev0.0
@@ -1,38 +0,0 @@
-Meta:
-  name: RAK6421 + RAK13300 Slot 1
-  support: community # Promote when tested
-  compatible:
-    - ebyte-ecb41-pge # Armbian
-
-Lora:
-  Module: sx1262
-  IRQ: # GPIO0_A5 (IO6, physical 15)
-    pin: 5
-    gpiochip: 0
-    line: 5
-  Reset: # GPIO0_A3 (IO4, physical 36)
-    pin: 3
-    gpiochip: 0
-    line: 3
-  Busy: # GPIO1_C3 (IO5, physical 18)
-    pin: 51
-    gpiochip: 1
-    line: 19
-  # Ant_sw: # GPIO1_C2 (IO3, physical 16)
-  #   pin: 50
-  #   gpiochip: 1
-  #   line: 18
-  Enable_Pins:
-    - pin: 43 # GPIO1_B3 (physical 32)
-      gpiochip: 1
-      line: 11
-    - pin: 57 # GPIO1_D1 (physical 33)
-      gpiochip: 1
-      line: 25
-  DIO3_TCXO_VOLTAGE: true
-  DIO2_AS_RF_SWITCH: true
-  spidev: spidev0.0
-  # CS: # GPIO0_B6 (SPI1_CSN0, physical 24)
-  #   pin: 14
-  #   gpiochip: 0
-  #   line: 14
@@ -1,36 +0,0 @@
-Meta:
-  name: RAK6421 + RAK13300 Slot 2
-  support: community # Promote when tested
-  compatible:
-    - ebyte-ecb41-pge # Armbian
-
-Lora:
-  Module: sx1262
-  IRQ: # GPIO0_B4 (IO6, physical 12)
-    pin: 12
-    gpiochip: 0
-    line: 12
-  Reset: # GPIO1_C3 (IO4, physical 18)
-    pin: 51
-    gpiochip: 1
-    line: 19
-  Busy: # GPIO0_B3 (IO5, physical 35)
-    pin: 11
-    gpiochip: 0
-    line: 11
-  # Ant_sw: # GPIO1_C2 (IO3, physical 16)
-  #   pin: 50
-  #   gpiochip: 1
-  #   line: 18
-  Enable_Pins:
-    - pin: 2 # GPIO0_A2 (physical 37)
-      gpiochip: 0
-      line: 2
-    - pin: 50 # GPIO1_C2 (physical 16)
-      gpiochip: 1
-      line: 18
-  spidev: spidev0.1
-  # CS: # GPIO0_A7 (SPI1_CSN1, physical 26)
-  #   pin: 7
-  #   gpiochip: 0
-  #   line: 7
@@ -1,39 +0,0 @@
-Meta:
-  name: RAK6421 + RAK13302 Slot 1
-  support: community # Promote when tested
-  compatible:
-    - ebyte-ecb41-pge # Armbian
-
-Lora:
-  Module: sx1262
-  IRQ: # GPIO0_A5 (IO6, physical 15)
-    pin: 5
-    gpiochip: 0
-    line: 5
-  Reset: # GPIO0_A3 (IO4, physical 36)
-    pin: 3
-    gpiochip: 0
-    line: 3
-  Busy: # GPIO1_C3 (IO5, physical 18)
-    pin: 51
-    gpiochip: 1
-    line: 19
-  # Ant_sw: # GPIO1_C2 (IO3, physical 16)
-  #   pin: 50
-  #   gpiochip: 1
-  #   line: 18
-  Enable_Pins:
-    - pin: 43 # GPIO1_B3 (physical 32)
-      gpiochip: 1
-      line: 11
-    - pin: 57 # GPIO1_D1 (physical 33)
-      gpiochip: 1
-      line: 25
-  DIO3_TCXO_VOLTAGE: true
-  DIO2_AS_RF_SWITCH: true
-  spidev: spidev0.0
-  # CS: # GPIO0_B6 (SPI1_CSN0, physical 24)
-  #   pin: 14
-  #   gpiochip: 0
-  #   line: 14
-  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]
@@ -1,37 +0,0 @@
-Meta:
-  name: RAK6421 + RAK13302 Slot 2
-  support: community # Promote when tested
-  compatible:
-    - ebyte-ecb41-pge # Armbian
-
-Lora:
-  Module: sx1262
-  IRQ: # GPIO0_B4 (IO6, physical 12)
-    pin: 12
-    gpiochip: 0
-    line: 12
-  Reset: # GPIO1_C3 (IO4, physical 18)
-    pin: 51
-    gpiochip: 1
-    line: 19
-  Busy: # GPIO0_B3 (IO5, physical 35)
-    pin: 11
-    gpiochip: 0
-    line: 11
-  # Ant_sw: # GPIO1_C2 (IO3, physical 16)
-  #   pin: 50
-  #   gpiochip: 1
-  #   line: 18
-  Enable_Pins:
-    - pin: 2 # GPIO0_A2 (physical 37)
-      gpiochip: 0
-      line: 2
-    - pin: 50 # GPIO1_C2 (physical 16)
-      gpiochip: 1
-      line: 18
-  spidev: spidev0.1
-  # CS: # GPIO0_A7 (SPI1_CSN1, physical 26)
-  #   pin: 7
-  #   gpiochip: 0
-  #   line: 7
-  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]
@@ -1,30 +0,0 @@
-Meta:
-  name: Waveshare SX1262
-  support: deprecated
-  compatible:
-    - ebyte-ecb41-pge # Armbian
-
-Lora:
-  Module: sx1262  # Waveshare SX126X XXXM
-  DIO2_AS_RF_SWITCH: true
-  CS: # GPIO0_A1 (physical 40)
-    pin: 1
-    gpiochip: 0
-    line: 1
-  IRQ: # GPIO0_A3 (physical 36)
-    pin: 3
-    gpiochip: 0
-    line: 3
-  Busy: # GPIO0_A0 (physical 38)
-    pin: 0
-    gpiochip: 0
-    line: 0
-  Reset: # GPIO0_B4 (physical 12)
-    pin: 12
-    gpiochip: 0
-    line: 12
-  SX126X_ANT_SW: # GPIO1_B2 (physical 31)
-    pin: 42
-    gpiochip: 1
-    line: 10
-  spidev: spidev0.0
@@ -1,21 +1,11 @@
-Meta:
-  name: RAK6421 + RAK13300 Slot 1 (Autoconf default)
-  support: official
-  compatible:
-    - raspberry-pi
-
 Lora:

-  ### RAK13300 in Slot 1
+  ### RAK13300in Slot 1
  Module: sx1262
  IRQ: 22 #IO6
  Reset: 16 # IO4
  Busy: 24 # IO5
-  Enable_Pins:
-    - 12
-    - 13
+  # Ant_sw: 13 # IO3 
  DIO3_TCXO_VOLTAGE: true
  DIO2_AS_RF_SWITCH: true
  spidev: spidev0.0
-  # GPIO_DETECT_PA: 13
-  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]
@@ -1,31 +0,0 @@
-# For use with Armbian luckfox-pico-max
-# Waveshare LoRa HAT for Raspberry Pi Pico
-# https://www.waveshare.com/wiki/Pico-LoRa-SX1262
-
-Meta:
-  name: luckfox-pico-max-ws-raspberry-pi-pico-hat
-  support: community
-  compatible:
-    - luckfox-pico-max # Armbian
-
-Lora:
-  Module: sx1262
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  spidev: spidev0.0
-  Busy: # GPIO1_C7 / GP2
-    pin: 55
-    gpiochip: 1
-    line: 23
-  CS: # GPIO1_C6 / GP3
-    pin: 54
-    gpiochip: 1
-    line: 22
-  Reset: # GPIO1_D1 / GP15
-    pin: 57
-    gpiochip: 1
-    line: 25
-  IRQ: # GPIO2_A2 / GP20
-    pin: 66
-    gpiochip: 2
-    line: 2
@@ -1,9 +1,3 @@
-Meta:
-  name: Luckfox Lyra PicoCalc Wio LoRa SX1262
-  support: official
-  compatible:
-    - luckfox-lyra-plus # Armbian
-
 Lora:
  Module: sx1262
  DIO2_AS_RF_SWITCH: true
@@ -1,23 +0,0 @@
-# For use with Armbian luckfox-lyra-ultra-w
-# Enable overlay 'luckfox-lyra-ultra-w-spi0-cs0-spidev' with armbian-config
-# https://github.com/wehooper4/Meshtastic-Hardware/tree/main/Luckfox%20Ultra%20Hat
-# 1 Watt Lyra Ultra hat
-Meta:
-  name: wehooper4 Luckfox Ultra 1W
-  support: community
-  compatible:
-    - luckfox-pico-ultra # Armbian
-    - luckfox-lyra-ultra # Armbian
-
-Lora:
-  Module: sx1262
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  CS: 10
-  IRQ: 5
-  Busy: 11
-  Reset: 9
-  RXen: 14
-
-  spidev: spidev0.0 #pins are (CS=10, CLK=8, MOSI=6, MISO=7)
-  spiSpeed: 2000000
@@ -1,24 +0,0 @@
-# For use with Armbian luckfox-lyra-ultra-w
-# Enable overlay 'luckfox-lyra-ultra-w-spi0-cs0-spidev' with armbian-config
-# https://github.com/wehooper4/Meshtastic-Hardware/tree/main/Luckfox%20Ultra%20Hat
-# 2 Watt Lyra Ultra hat
-Meta:
-  name: wehooper4 Luckfox Ultra 2W
-  support: community
-  compatible:
-    - luckfox-pico-ultra # Armbian
-    - luckfox-lyra-ultra # Armbian
-
-Lora:
-  Module: sx1262
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  SX126X_MAX_POWER: 8
-  CS: 10
-  IRQ: 5
-  Busy: 11
-  Reset: 9
-  RXen: 14
-
-  spidev: spidev0.0 #pins are (CS=10, CLK=8, MOSI=6, MISO=7)
-  spiSpeed: 2000000
@@ -1,31 +0,0 @@
-# For use with Armbian luckfox-lyra // luckfox-lyra-plus
-# Enable overlay 'luckfox-lyra-plus-spi0-cs0_rmio13-spidev' with armbian-config
-# Waveshare LoRa HAT for Raspberry Pi Pico
-# https://www.waveshare.com/wiki/Pico-LoRa-SX1262
-Meta:
-  name: Waveshare LoRa HAT for Raspberry Pi Pico
-  support: community
-  compatible:
-    - luckfox-lyra-plus # Armbian
-
-Lora:
-  Module: sx1262
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  spidev: spidev0.0
-  CS: # GPIO0_B5
-    pin: 13
-    gpiochip: 0
-    line: 13
-  IRQ: # GPIO1_C2
-    pin: 50
-    gpiochip: 1
-    line: 18
-  Busy: # GPIO0_B4
-    pin: 12
-    gpiochip: 0
-    line: 12
-  Reset: # GPIO0_A2
-    pin: 2
-    gpiochip: 0
-    line: 2
@@ -1,39 +0,0 @@
-# MeshAdv-Pi E22-900M30S
-# https://github.com/chrismyers2000/MeshAdv-Pi-Hat
-Meta:
-  name: MeshAdv-Pi E22-900M30S
-  support: community
-  compatible:
-    - luckfox-lyra-zero-w # Armbian
-
-Lora:
-  Module: sx1262
-  CS: # GPIO0_C2 (physical 40)
-    pin: 18
-    gpiochip: 0
-    line: 18
-  IRQ: # GPIO1_D1 (physical 36)
-    pin: 57
-    gpiochip: 1
-    line: 25
-  Busy: # GPIO0_C1 (physical 38)
-    pin: 17
-    gpiochip: 0
-    line: 17
-  Reset: # GPIO0_B6 (physical 12)
-    pin: 14
-    gpiochip: 0
-    line: 14
-  TXen: # GPIO1_C2 (physical 33)
-    pin: 50
-    gpiochip: 1
-    line: 18
-  RXen: # GPIO1_D2 (physical 32)
-    pin: 58
-    gpiochip: 1
-    line: 26
-  DIO3_TCXO_VOLTAGE: true
-  # Only for E22-900M33S:
-  # Limit the output power to 8 dBm
-  # SX126X_MAX_POWER: 8
-  spidev: spidev0.0
@@ -1,33 +0,0 @@
-# MeshAdv Mini E22-900M22S
-# https://github.com/chrismyers2000/MeshAdv-Mini
-Meta:
-  name: MeshAdv Mini E22-900M22S
-  support: community
-  compatible:
-    - luckfox-lyra-zero-w # Armbian
-
-Lora:
-  Module: sx1262 # Ebyte E22-900M22S
-  CS: # GPIO0_B2_d (phys 24, RPi CE0)
-    pin: 10
-    gpiochip: 0
-    line: 10
-  IRQ: # GPIO1_D1_d (phys 36, RPi GPIO16)
-    pin: 57
-    gpiochip: 1
-    line: 25
-  Busy: # GPIO0_C1_d (phys 38, RPi GPIO20)
-    pin: 17
-    gpiochip: 0
-    line: 17
-  Reset: # GPIO0_B4_d (phys 18, RPi GPIO24)
-    pin: 12
-    gpiochip: 0
-    line: 12
-  RXen: # GPIO1_D2_d (phys 32, RPi GPIO12)
-    pin: 58
-    gpiochip: 1
-    line: 26
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  spidev: spidev0.0
@@ -1,38 +0,0 @@
-Meta:
-  name: RAK6421 + RAK13300 Slot 1
-  support: community # Promote when tested
-  compatible:
-    - luckfox-lyra-zero-w # Armbian
-
-Lora:
-  Module: sx1262
-  IRQ: # GPIO0_A5 (IO6)
-    pin: 5
-    gpiochip: 0
-    line: 5
-  Reset: # GPIO1_D1 (IO4)
-    pin: 57
-    gpiochip: 1
-    line: 25
-  Busy: # GPIO0_B4 (IO5)
-    pin: 12
-    gpiochip: 0
-    line: 12
-  # Ant_sw: # GPIO1_C2 (IO3)
-  #   pin: 50
-  #   gpiochip: 1
-  #   line: 18
-  Enable_Pins:
-    - pin: 58 # GPIO1_D2
-      gpiochip: 1
-      line: 26
-    - pin: 50 # GPIO1_C2
-      gpiochip: 1
-      line: 18
-  DIO3_TCXO_VOLTAGE: true
-  DIO2_AS_RF_SWITCH: true
-  spidev: spidev0.0
-  # CS: # GPIO0_B2
-  #   pin: 10
-  #   gpiochip: 0
-  #   line: 10
@@ -1,36 +0,0 @@
-Meta:
-  name: RAK6421 + RAK13300 Slot 2
-  support: community # Promote when tested
-  compatible:
-    - luckfox-lyra-zero-w # Armbian
-
-Lora:
-  Module: sx1262
-  IRQ: # GPIO0_B6 (IO6)
-    pin: 14
-    gpiochip: 0
-    line: 14
-  Reset: # GPIO0_B4 (IO4)
-    pin: 12
-    gpiochip: 0
-    line: 12
-  Busy: # GPIO1_C0 (IO5)
-    pin: 48
-    gpiochip: 1
-    line: 16
-  # Ant_sw: # GPIO0_B5 (IO3)
-  #   pin: 13
-  #   gpiochip: 0
-  #   line: 13
-  Enable_Pins:
-    - pin: 51 # GPIO1_C3
-      gpiochip: 1
-      line: 19
-    - pin: 13 # GPIO0_B5
-      gpiochip: 0
-      line: 13
-  spidev: spidev0.1
-  # CS: # GPIO0_B1
-  #   pin: 9
-  #   gpiochip: 0
-  #   line: 9
@@ -1,39 +0,0 @@
-Meta:
-  name: RAK6421 + RAK13300 Slot 1
-  support: community # Promote when tested
-  compatible:
-    - luckfox-lyra-zero-w # Armbian
-
-Lora:
-  Module: sx1262
-  IRQ: # GPIO0_A5 (IO6)
-    pin: 5
-    gpiochip: 0
-    line: 5
-  Reset: # GPIO1_D1 (IO4)
-    pin: 57
-    gpiochip: 1
-    line: 25
-  Busy: # GPIO0_B4 (IO5)
-    pin: 12
-    gpiochip: 0
-    line: 12
-  # Ant_sw: # GPIO1_C2 (IO3)
-  #   pin: 50
-  #   gpiochip: 1
-  #   line: 18
-  Enable_Pins:
-    - pin: 58 # GPIO1_D2
-      gpiochip: 1
-      line: 26
-    - pin: 50 # GPIO1_C2
-      gpiochip: 1
-      line: 18
-  DIO3_TCXO_VOLTAGE: true
-  DIO2_AS_RF_SWITCH: true
-  spidev: spidev0.0
-  # CS: # GPIO0_B2
-  #   pin: 10
-  #   gpiochip: 0
-  #   line: 10
-  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]
@@ -1,37 +0,0 @@
-Meta:
-  name: RAK6421 + RAK13300 Slot 2
-  support: community # Promote when tested
-  compatible:
-    - luckfox-lyra-zero-w # Armbian
-
-Lora:
-  Module: sx1262
-  IRQ: # GPIO0_B6 (IO6)
-    pin: 14
-    gpiochip: 0
-    line: 14
-  Reset: # GPIO0_B4 (IO4)
-    pin: 12
-    gpiochip: 0
-    line: 12
-  Busy: # GPIO1_C0 (IO5)
-    pin: 48
-    gpiochip: 1
-    line: 16
-  # Ant_sw: # GPIO0_B5 (IO3)
-  #   pin: 13
-  #   gpiochip: 0
-  #   line: 13
-  Enable_Pins:
-    - pin: 51 # GPIO1_C3
-      gpiochip: 1
-      line: 19
-    - pin: 13 # GPIO0_B5
-      gpiochip: 0
-      line: 13
-  spidev: spidev0.1
-  # CS: # GPIO0_B1
-  #   pin: 9
-  #   gpiochip: 0
-  #   line: 9
-  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]
@@ -1,30 +0,0 @@
-Meta:
-  name: Waveshare SX1262
-  support: deprecated
-  compatible:
-    - luckfox-lyra-zero-w # Armbian
-
-Lora:
-  Module: sx1262  # Waveshare SX126X XXXM
-  DIO2_AS_RF_SWITCH: true
-  CS: # GPIO0_C2 (physical 40)
-    pin: 18
-    gpiochip: 0
-    line: 18
-  IRQ: # GPIO1_D1 (physical 36)
-    pin: 57
-    gpiochip: 1
-    line: 25
-  Busy: # GPIO0_C1 (physical 38)
-    pin: 17
-    gpiochip: 0
-    line: 17
-  Reset: # GPIO0_B6 (physical 12)
-    pin: 14
-    gpiochip: 0
-    line: 14
-  SX126X_ANT_SW: # GPIO1_B3 (physical 31)
-    pin: 43
-    gpiochip: 1
-    line: 11
-  spidev: spidev0.0
@@ -1,9 +1,3 @@
-Meta:
-  name: Lora Meshstick SX1262
-  support: official
-  compatible:
-    - usb
-
 Lora:
  Module: sx1262
  CS: 0
@@ -1,41 +0,0 @@
-# !! WARNING: Hats on the OK3506 board are installed "backwards" (facing outwards)
-
-# MeshAdv-Pi E22-900M30S
-# https://github.com/chrismyers2000/MeshAdv-Pi-Hat
-Meta:
-  name: MeshAdv-Pi E22-900M30S
-  support: community
-  compatible:
-    - forlinx-ok3506-s12 # Armbian
-
-Lora:
-  Module: sx1262
-  CS: # GPIO0_B0 (physical 40)
-    pin: 8
-    gpiochip: 0
-    line: 8
-  IRQ: # GPIO3_B0 (physical 36)
-    pin: 104
-    gpiochip: 3
-    line: 8
-  Busy: # GPIO0_B1 (physical 38)
-    pin: 9
-    gpiochip: 0
-    line: 9
-  Reset: # GPIO0_B6 (physical 12)
-    pin: 14
-    gpiochip: 0
-    line: 14
-  TXen: # GPIO0_A3 (physical 33)
-    pin: 3
-    gpiochip: 0
-    line: 3
-  RXen: # GPIO0_A2 (physical 32)
-    pin: 2
-    gpiochip: 0
-    line: 2
-  DIO3_TCXO_VOLTAGE: true
-  # Only for E22-900M33S:
-  # Limit the output power to 8 dBm
-  # SX126X_MAX_POWER: 8
-  spidev: spidev0.0
@@ -1,35 +0,0 @@
-# !! WARNING: Hats on the OK3506 board are installed "backwards" (facing outwards)
-
-# MeshAdv Mini E22-900M22S
-# https://github.com/chrismyers2000/MeshAdv-Mini
-Meta:
-  name: MeshAdv Mini E22-900M22S
-  support: community
-  compatible:
-    - forlinx-ok3506-s12 # Armbian
-
-Lora:
-  Module: sx1262 # Ebyte E22-900M22S
-  CS: # GPIO0_C3 (physical 24, SPI0_CSN0)
-    pin: 19
-    gpiochip: 0
-    line: 19
-  IRQ: # GPIO3_B0 (physical 36)
-    pin: 104
-    gpiochip: 3
-    line: 8
-  Busy: # GPIO0_B1 (physical 38)
-    pin: 9
-    gpiochip: 0
-    line: 9
-  Reset: # GPIO3_A6 (physical 18)
-    pin: 102
-    gpiochip: 3
-    line: 6
-  RXen: # GPIO0_A2 (physical 32)
-    pin: 2
-    gpiochip: 0
-    line: 2
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  spidev: spidev0.0
@@ -1,40 +0,0 @@
-# !! WARNING: Hats on the OK3506 board are installed "backwards" (facing outwards)
-
-Meta:
-  name: RAK6421 + RAK13300 Slot 1
-  support: community # Promote when tested
-  compatible:
-    - forlinx-ok3506-s12 # Armbian
-
-Lora:
-  Module: sx1262
-  IRQ: # GPIO3_B5 (IO6, physical 15)
-    pin: 109
-    gpiochip: 3
-    line: 13
-  Reset: # GPIO3_B0 (IO4, physical 36)
-    pin: 104
-    gpiochip: 3
-    line: 8
-  Busy: # GPIO3_A6 (IO5, physical 18)
-    pin: 102
-    gpiochip: 3
-    line: 6
-  # Ant_sw: # GPIO0_A3 (IO3, physical 33)
-  #   pin: 3
-  #   gpiochip: 0
-  #   line: 3
-  Enable_Pins:
-    - pin: 2 # GPIO0_A2 (physical 32)
-      gpiochip: 0
-      line: 2
-    - pin: 3 # GPIO0_A3 (physical 33)
-      gpiochip: 0
-      line: 3
-  DIO3_TCXO_VOLTAGE: true
-  DIO2_AS_RF_SWITCH: true
-  spidev: spidev0.0
-  # CS: # GPIO0_C3 (SPI0_CSN0, physical 24)
-  #   pin: 19
-  #   gpiochip: 0
-  #   line: 19
@@ -1,38 +0,0 @@
-# !! WARNING: Hats on the OK3506 board are installed "backwards" (facing outwards)
-
-Meta:
-  name: RAK6421 + RAK13300 Slot 2
-  support: community # Promote when tested
-  compatible:
-    - forlinx-ok3506-s12 # Armbian
-
-Lora:
-  Module: sx1262
-  IRQ: # GPIO0_B6 (IO6, physical 12)
-    pin: 14
-    gpiochip: 0
-    line: 14
-  Reset: # GPIO3_A6 (IO4, physical 18)
-    pin: 102
-    gpiochip: 3
-    line: 6
-  Busy: # GPIO0_B2 (IO5, physical 35)
-    pin: 10
-    gpiochip: 0
-    line: 10
-  # Ant_sw: # GPIO3_A7 (IO3, physical 16)
-  #   pin: 103
-  #   gpiochip: 3
-  #   line: 7
-  Enable_Pins:
-    - pin: 106 # GPIO3_B2 (physical 37)
-      gpiochip: 3
-      line: 10
-    - pin: 103 # GPIO3_A7 (physical 16)
-      gpiochip: 3
-      line: 7
-  spidev: spidev0.1
-  # CS: # GPIO0_B7 (SPI0_CSN1, physical 26)
-  #   pin: 15
-  #   gpiochip: 0
-  #   line: 15
@@ -1,41 +0,0 @@
-# !! WARNING: Hats on the OK3506 board are installed "backwards" (facing outwards)
-
-Meta:
-  name: RAK6421 + RAK13302 Slot 1
-  support: community # Promote when tested
-  compatible:
-    - forlinx-ok3506-s12 # Armbian
-
-Lora:
-  Module: sx1262
-  IRQ: # GPIO3_B5 (IO6, physical 15)
-    pin: 109
-    gpiochip: 3
-    line: 13
-  Reset: # GPIO3_B0 (IO4, physical 36)
-    pin: 104
-    gpiochip: 3
-    line: 8
-  Busy: # GPIO3_A6 (IO5, physical 18)
-    pin: 102
-    gpiochip: 3
-    line: 6
-  # Ant_sw: # GPIO0_A3 (IO3, physical 33)
-  #   pin: 3
-  #   gpiochip: 0
-  #   line: 3
-  Enable_Pins:
-    - pin: 2 # GPIO0_A2 (physical 32)
-      gpiochip: 0
-      line: 2
-    - pin: 3 # GPIO0_A3 (physical 33)
-      gpiochip: 0
-      line: 3
-  DIO3_TCXO_VOLTAGE: true
-  DIO2_AS_RF_SWITCH: true
-  spidev: spidev0.0
-  # CS: # GPIO0_C3 (SPI0_CSN0, physical 24)
-  #   pin: 19
-  #   gpiochip: 0
-  #   line: 19
-  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]
@@ -1,39 +0,0 @@
-# !! WARNING: Hats on the OK3506 board are installed "backwards" (facing outwards)
-
-Meta:
-  name: RAK6421 + RAK13302 Slot 2
-  support: community # Promote when tested
-  compatible:
-    - forlinx-ok3506-s12 # Armbian
-
-Lora:
-  Module: sx1262
-  IRQ: # GPIO0_B6 (IO6, physical 12)
-    pin: 14
-    gpiochip: 0
-    line: 14
-  Reset: # GPIO3_A6 (IO4, physical 18)
-    pin: 102
-    gpiochip: 3
-    line: 6
-  Busy: # GPIO0_B2 (IO5, physical 35)
-    pin: 10
-    gpiochip: 0
-    line: 10
-  # Ant_sw: # GPIO3_A7 (IO3, physical 16)
-  #   pin: 103
-  #   gpiochip: 3
-  #   line: 7
-  Enable_Pins:
-    - pin: 106 # GPIO3_B2 (physical 37)
-      gpiochip: 3
-      line: 10
-    - pin: 103 # GPIO3_A7 (physical 16)
-      gpiochip: 3
-      line: 7
-  spidev: spidev0.1
-  # CS: # GPIO0_B7 (SPI0_CSN1, physical 26)
-  #   pin: 15
-  #   gpiochip: 0
-  #   line: 15
-  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]
@@ -1,32 +0,0 @@
-# !! WARNING: Hats on the OK3506 board are installed "backwards" (facing outwards)
-
-Meta:
-  name: Waveshare SX1262
-  support: deprecated
-  compatible:
-    - forlinx-ok3506-s12 # Armbian
-
-Lora:
-  Module: sx1262  # Waveshare SX126X XXXM
-  DIO2_AS_RF_SWITCH: true
-  CS: # GPIO0_B0 (physical 40)
-    pin: 8
-    gpiochip: 0
-    line: 8
-  IRQ: # GPIO3_B0 (physical 36)
-    pin: 104
-    gpiochip: 3
-    line: 8
-  Busy: # GPIO0_B1 (physical 38)
-    pin: 9
-    gpiochip: 0
-    line: 9
-  Reset: # GPIO0_B6 (physical 12)
-    pin: 14
-    gpiochip: 0
-    line: 14
-  SX126X_ANT_SW: # GPIO3_B3 (physical 31)
-    pin: 107
-    gpiochip: 3
-    line: 11
-  spidev: spidev0.0
@@ -1,9 +1,3 @@
-Meta:
-  name: Lora Meshstick SX1262
-  support: community
-  compatible:
-    - usb
-
 Lora:
  Module: lr1121
  CS: 0
@@ -1,11 +1,5 @@
-Meta:
-  name: Pinedio USB SX1262
-  support: deprecated
-  compatible:
-    - usb
-
 Lora:
  Module: sx1262
  CS: 0 
  IRQ: 10
-  spidev: ch341
+  spidev: ch341
@@ -1,9 +1,3 @@
-Meta:
-  name: raxda-rock2f-starter-edition-hat
-  support: community
-  compatible:
-    - rock-2f # Armbian
-
 Lora:

 ### Raxda Rock 2F running Armbian Linux 6.1.99-vendor-rk35xx
@@ -1,11 +1,5 @@
 # https://www.waveshare.com/core1262-868m.htm
 # https://github.com/markbirss/lora-starter-edition-sx1262-i2c
-Meta:
-  name: lora-starter-edition-sx1262-i2c
-  support: community
-  compatible:
-    - raspberry-pi
-
 Lora:
  Module: sx1262  # Starter Edition SX1262 I2C Raspberry Pi HAT
  DIO2_AS_RF_SWITCH: true
@@ -1,9 +1,3 @@
-Meta:
-  name: meshstick-1262
-  support: official
-  compatible:
-    - usb
-
 Lora:
  Module: sx1262
  CS: 0
@@ -1,9 +1,3 @@
-Meta:
-  name: meshtoad-e22
-  support: official
-  compatible:
-    - usb
-
 Lora:
  Module: sx1262
  CS: 0
@@ -1,9 +1,3 @@
-Meta:
-  name: umesh-1262-30dbm
-  support: community
-  compatible:
-    - clockwork-uconsole
-
 Lora:
  Module: sx1262
  CS: 0
@@ -19,7 +13,8 @@ Lora:
 #  USB_Serialnum: 12345678
  SX126X_MAX_POWER: 22
 # Reduce output power to improve EMI
-  TX_GAIN_LORA: [12, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 8, 8, 7]
+  NUM_PA_POINTS: 22
+  TX_GAIN_LORA: 12, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 8, 8, 7
 # Note: This module integrates an additional PA to achieve higher output power.
 # The 'power' parameter here does not represent the actual RF output.
 # TX_GAIN_LORA defines the gain offset applied at each SX1262 input power step (1–22 dBm).
@@ -1,9 +1,3 @@
-Meta:
-  name: umesh-1268-30dbm
-  support: community
-  compatible:
-    - clockwork-uconsole
-
 Lora:
  Module: sx1268
  CS: 0
@@ -19,7 +13,8 @@ Lora:
 #  USB_Serialnum: 12345678
  SX126X_MAX_POWER: 22
 # Reduce output power to improve EMI
-  TX_GAIN_LORA: [12, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 8, 8, 7]
+  NUM_PA_POINTS: 22
+  TX_GAIN_LORA: 12, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 8, 8, 7
 # Note: This module integrates an additional PA to achieve higher output power.
 # The 'power' parameter here does not represent the actual RF output.
 # TX_GAIN_LORA defines the gain offset applied at each SX1262 input power step (1–22 dBm).
@@ -1,9 +1,3 @@
-Meta:
-  name: Waveshare SX1262
-  support: deprecated
-  compatible:
-    - raspberry-pi
-
 Lora:
  Module: sx1262  # Waveshare SX126X XXXM
  DIO2_AS_RF_SWITCH: true
@@ -1,12 +1,5 @@
 # https://www.waveshare.com/pico-lora-sx1262-868m.htm
 # https://github.com/markbirss/lora-ws-raspberry-pi-pico-to-rpi-adapter
-
-Meta:
-  name: ws-raspberry-pico-to-rpi-adapter
-  support: community
-  compatible:
-    - raspberry-pi
-
 Lora:
  Module: sx1262  # Waveshare Raspberry Pi Pico to Raspberry Pi HAT Adapter
  DIO2_AS_RF_SWITCH: true
@@ -15,12 +15,6 @@
 #   5     CS          24
 #   26    DIO1/IRQ    26

-Meta:
-  name: ws-raspberry-pico-to-orangepi-03
-  support: community
-  compatible:
-    - orange-pi-zero-3 # Armbian
-
 Lora:
  Module: sx1262  # Waveshare Raspberry Pico Lora module
  DIO2_AS_RF_SWITCH: true
@@ -43,7 +43,7 @@ for pio_env in pio_envs:
  env = {
    "ci": {"board": pio_env, "platform": env_platform},
    "board_level": cfg.get(f"env:{pio_env}", "board_level", default=None),
-    "board_check": cfg.get(f"env:{pio_env}", "board_check", default="false").strip().lower() == "true",
+    "board_check": bool(cfg.get(f"env:{pio_env}", "board_check", default=False)),
  }
  all_envs.append(env)

@@ -1,31 +1,25 @@
 #!/usr/bin/env python3
-"""Generate release notes from the actual release commit range."""
+"""
+Generate release notes from merged PRs on develop and master branches.
+Categorizes PRs into Enhancements and Bug Fixes/Maintenance sections.
+"""

-import argparse
-import json
-import re
 import subprocess
+import re
+import json
 import sys
+from datetime import datetime


-def get_last_release_tag(compare_ref, exclude_tag=None):
-    """Get the most recent version tag merged into compare_ref."""
+def get_last_release_tag():
+    """Get the most recent release tag."""
    result = subprocess.run(
-        ["git", "tag", "--merged", compare_ref, "--sort=-version:refname", "v*"],
+        ["git", "describe", "--tags", "--abbrev=0"],
        capture_output=True,
        text=True,
        check=True,
    )
-
-    for line in result.stdout.splitlines():
-        candidate = line.strip()
-        if not candidate:
-            continue
-        if exclude_tag and candidate == exclude_tag:
-            continue
-        return candidate
-
-    raise subprocess.CalledProcessError(result.returncode, result.args, output=result.stdout, stderr=result.stderr)
+    return result.stdout.strip()


 def get_tag_date(tag):
@@ -39,18 +33,18 @@ def get_tag_date(tag):
    return result.stdout.strip()


-def get_merged_prs_in_range(tag, compare_ref):
-    """Get all merged PRs in the git range between tag and compare_ref."""
+def get_merged_prs_since_tag(tag, branch):
+    """Get all merged PRs since the given tag on the specified branch."""
+    # Get commits since tag on the branch - look for PR numbers in parentheses
    result = subprocess.run(
        [
            "git",
            "log",
-            f"{tag}..{compare_ref}",
+            f"{tag}..origin/{branch}",
            "--oneline",
        ],
        capture_output=True,
        text=True,
-        check=True,
    )

    prs = []
@@ -71,25 +65,6 @@ def get_merged_prs_in_range(tag, compare_ref):
    return prs


-def parse_args():
-    """Parse CLI arguments."""
-    parser = argparse.ArgumentParser(
-        description="Generate release notes from the actual release commit range."
-    )
-    parser.add_argument("new_version", help="Version that will be tagged for this release")
-    parser.add_argument(
-        "--base-tag",
-        dest="base_tag",
-        help="Existing version tag to diff from. Defaults to the latest version tag merged into the compare ref.",
-    )
-    parser.add_argument(
-        "--compare-ref",
-        default="HEAD",
-        help="Git ref to diff to. Defaults to HEAD.",
-    )
-    return parser.parse_args()
-
-
 def get_pr_details(pr_number):
    """Get PR details from GitHub API via gh CLI."""
    try:
@@ -293,28 +268,28 @@ def get_new_contributors(pr_details_list, tag, repo="meshtastic/firmware"):


 def main():
-    args = parse_args()
-    new_version = args.new_version
-    compare_ref = args.compare_ref
-    current_tag = f"v{new_version}"
+    if len(sys.argv) < 2:
+        print("Usage: generate_release_notes.py <new_version>", file=sys.stderr)
+        sys.exit(1)
+
+    new_version = sys.argv[1]

    # Get last release tag
    try:
-        last_tag = args.base_tag or get_last_release_tag(compare_ref, exclude_tag=current_tag)
+        last_tag = get_last_release_tag()
    except subprocess.CalledProcessError:
        print("Error: Could not find last release tag", file=sys.stderr)
        sys.exit(1)

-    print(
-        f"Resolved release note range: {last_tag}..{compare_ref}",
-        file=sys.stderr,
-    )
+    # Collect PRs from both branches
+    all_pr_numbers = set()

-    try:
-        all_pr_numbers = set(get_merged_prs_in_range(last_tag, compare_ref))
-    except subprocess.CalledProcessError as e:
-        print(f"Error: Could not get PRs for range {last_tag}..{compare_ref}: {e}", file=sys.stderr)
-        sys.exit(1)
+    for branch in ["develop", "master"]:
+        try:
+            prs = get_merged_prs_since_tag(last_tag, branch)
+            all_pr_numbers.update(prs)
+        except Exception as e:
+            print(f"Warning: Could not get PRs from {branch}: {e}", file=sys.stderr)

    # Get details for all PRs
    enhancements = []
@@ -87,15 +87,6 @@
  </screenshots>

  <releases>
-    <release version="2.7.23" date="2026-04-14">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.23</url>
-    </release>
-    <release version="2.7.22" date="2026-04-06">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.22</url>
-    </release>
-    <release version="2.7.21" date="2026-03-11">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.21</url>
-    </release>
    <release version="2.7.20" date="2026-02-11">
      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.20</url>
    </release>
@@ -1,44 +0,0 @@
-#!/usr/bin/env bash
-# Run native PlatformIO tests inside Docker (for macOS / non-Linux hosts).
-#
-# Usage:
-#   ./bin/test-native-docker.sh                          # run all native tests
-#   ./bin/test-native-docker.sh -f test_transmit_history  # run specific test filter
-#   ./bin/test-native-docker.sh --rebuild                 # force rebuild the image
-#
-set -euo pipefail
-
-SCRIPT_DIR="$(cd "$(dirname "$0")" && pwd)"
-ROOT_DIR="$(cd "$SCRIPT_DIR/.." && pwd)"
-IMAGE_NAME="meshtastic-native-test"
-
-REBUILD=false
-EXTRA_ARGS=()
-
-for arg in "$@"; do
-    if [[ "$arg" == "--rebuild" ]]; then
-        REBUILD=true
-    else
-        EXTRA_ARGS+=("$arg")
-    fi
-done
-
-if $REBUILD || ! docker image inspect "$IMAGE_NAME" >/dev/null 2>&1; then
-    echo "Building test image (first run may take a few minutes)..."
-    docker build -t "$IMAGE_NAME" -f "$ROOT_DIR/Dockerfile.test" "$ROOT_DIR"
-fi
-
-# Disable BUILD_EPOCH to avoid full rebuilds between test runs (matches CI)
-sed_cmd='s/-DBUILD_EPOCH=$UNIX_TIME/#-DBUILD_EPOCH=$UNIX_TIME/'
-
-# Default: run all tests. Pass extra args (e.g. -f test_transmit_history) through.
-if [[ ${#EXTRA_ARGS[@]} -eq 0 ]]; then
-    CMD=("platformio" "test" "-e" "coverage" "-v")
-else
-    CMD=("platformio" "test" "-e" "coverage" "-v" "${EXTRA_ARGS[@]}")
-fi
-
-exec docker run --rm \
-    -v "$ROOT_DIR:/src:ro" \
-    "$IMAGE_NAME" \
-    bash -c "rm -rf /tmp/fw-test && cp -a /src /tmp/fw-test && cd /tmp/fw-test && sed -i '${sed_cmd}' platformio.ini && ${CMD[*]}"
@@ -1,54 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x239A", "0x4405"],
-      ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"],
-      ["0x2886", "0x1667"]
-    ],
-    "usb_product": "HT-n5262G",
-    "mcu": "nrf52840",
-    "variant": "heltec_mesh_node_t096",
-    "variants_dir": "variants",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "Heltec nrf (Adafruit BSP)",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "https://heltec.org/",
-  "vendor": "Heltec"
-}
@@ -1,40 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "partitions": "default.csv"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DARDUINO_ESP32S3_DEV",
-      "-DARDUINO_USB_MODE=1",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "hwids": [["0x303A", "0x1001"]],
-    "mcu": "esp32s3",
-    "variant": "esp32s3"
-  },
-  "connectivity": ["wifi"],
-  "debug": {
-    "default_tool": "esp-builtin",
-    "onboard_tools": ["esp-builtin"],
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "LilyGo Mini-Epaper-S3 (4 MB Flash, 2MB PSRAM)",
-  "upload": {
-    "flash_size": "4MB",
-    "maximum_ram_size": 327680,
-    "maximum_size": 4194304,
-    "require_upload_port": true,
-    "speed": 460800
-  },
-  "url": "https://www.lilygo.cc",
-  "vendor": "LilyGo"
-}
@@ -1,38 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "memory_type": "qio_opi",
-      "partitions": "default_16MB.csv"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=0",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=1"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "hwids": [["0x303A", "0x1001"]],
-    "mcu": "esp32s3",
-    "variant": "esp32s3"
-  },
-  "connectivity": ["wifi", "bluetooth", "lora"],
-  "debug": {
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "LilyGo T5-ePaper-S3",
-  "upload": {
-    "flash_size": "16MB",
-    "maximum_ram_size": 327680,
-    "maximum_size": 16777216,
-    "require_upload_port": true,
-    "speed": 921600
-  },
-  "url": "https://lilygo.cc/products/t5-e-paper-s3-pro",
-  "vendor": "LILYGO"
-}
@@ -1,29 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32_out.ld"
-    },
-    "core": "esp32",
-    "extra_flags": "-DARDUINO_T_Beam",
-    "f_cpu": "240000000L",
-    "f_flash": "40000000L",
-    "flash_mode": "dio",
-    "mcu": "esp32",
-    "variant": "tbeam"
-  },
-  "connectivity": ["wifi", "bluetooth", "can", "ethernet"],
-  "debug": {
-    "openocd_board": "esp-wroom-32.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "TTGO T-Beam (PSRAM Disabled)",
-  "upload": {
-    "flash_size": "4MB",
-    "maximum_ram_size": 1310720,
-    "maximum_size": 4194304,
-    "require_upload_port": true,
-    "speed": 460800
-  },
-  "url": "https://github.com/LilyGO/TTGO-T-Beam",
-  "vendor": "TTGO"
-}
@@ -12,6 +12,6 @@ Ex:
 - `logo_320x480.png`
 - `logo_320x240.png`

-This file is copied to `data/boot/logo.png` before filesystem image compilation.
+This file is copied to `data/boot/logo.png` before filesytem image compilation.

 For additional examples see the [`event/defcon33` branch](https://github.com/meshtastic/firmware/tree/event/defcon33).
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
HarukiToreda	6457a7ab9e	Merge branch 'develop' into Freetext	2026-02-23 20:55:58 -05:00
HarukiToreda	c27ad2349b	Suppress Navigation bar for Freetext frames	2026-02-19 21:49:43 -05:00
HarukiToreda	e206f14f37	Emote Picker Refactoring	2026-02-19 18:26:52 -05:00
HarukiToreda	1e7228f667	Grid View Emotes	2026-02-19 17:35:58 -05:00
HarukiToreda	f6bf33d61d	Optimization	2026-02-19 17:09:28 -05:00
HarukiToreda	951b812693	Emote support on "e" press	2026-02-19 14:44:41 -05:00
HarukiToreda	2632122495	Rounded selections and hidden navigation bar	2026-02-19 13:48:51 -05:00
HarukiToreda	96e9041943	CannedMessageModule.cpp refactoring	2026-02-19 13:06:33 -05:00
HarukiToreda	2b03d012f2	Text Prediction	2026-02-19 02:51:52 -05:00