Add build flag to exclude web server in MUI build for Wismesh Tap V2

Set T-LoRA pager audio board volume to 75%
Upgrade trunk (#10047 )
2026-04-05 07:48:24 -05:00 · 2026-04-04 20:05:22 -05:00 · 2026-04-03 06:39:53 -05:00 · 2026-04-03 08:27:36 +11:00 · 2026-04-02 06:34:31 -05:00 · 2026-04-01 21:13:16 -05:00
134 changed files with 2526 additions and 774 deletions
@@ -8,8 +8,6 @@ runs:
      uses: actions/checkout@v6
      with:
        submodules: recursive
-        ref: ${{github.event.pull_request.head.ref}}
-        repository: ${{github.event.pull_request.head.repo.full_name}}

    - name: Install dependencies
      shell: bash
@@ -16,8 +16,7 @@ on:
        type: string

 permissions:
-  contents: write
-  packages: write
+  contents: read

 jobs:
  build-debian-src:
@@ -28,8 +27,6 @@ jobs:
        with:
          submodules: recursive
          path: meshtasticd
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}

      - name: Install deps
        shell: bash
@@ -42,6 +39,7 @@ jobs:
          sudo mk-build-deps --install --remove --tool='apt-get -o Debug::pkgProblemResolver=yes --no-install-recommends --yes' debian/control

      - name: Import GPG key
+        if: github.event_name != 'pull_request' && github.event_name != 'pull_request_target'
        uses: crazy-max/ghaction-import-gpg@v7
        with:
          gpg_private_key: ${{ secrets.PPA_GPG_PRIVATE_KEY }}
@@ -60,7 +58,7 @@ jobs:
        run: debian/ci_pack_sdeb.sh
        env:
          SERIES: ${{ inputs.series }}
-          GPG_KEY_ID: ${{ steps.gpg.outputs.keyid }}
+          GPG_KEY_ID: ${{ steps.gpg.outputs.keyid || '' }}
          PKG_VERSION: ${{ steps.version.outputs.deb }}

      - name: Store binaries as an artifact
@@ -26,8 +26,6 @@ jobs:
      - uses: actions/checkout@v6
        with:
          submodules: recursive
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}

      - name: Build ${{ inputs.platform }}
        id: build
@@ -87,7 +87,7 @@ jobs:

  gather-artifacts:
    permissions:
-      contents: write
+      contents: read
      pull-requests: write
    runs-on: ubuntu-latest
    needs: [version, build]
@@ -5,7 +5,7 @@ on:
  workflow_dispatch:
  push:
    branches:
-      - master
+      - develop # Default branch, same as 'cron' above
    paths:
      - debian/**
      - "*.rpkg"
@@ -16,7 +16,7 @@ on:
      - .github/workflows/hook_copr.yml

 permissions:
-  contents: write
+  contents: read
  packages: write

 jobs:
@@ -37,7 +37,7 @@ on:
        value: ${{ jobs.docker-build.outputs.digest }}

 permissions:
-  contents: write
+  contents: read
  packages: write

 jobs:
@@ -50,8 +50,6 @@ jobs:
        uses: actions/checkout@v6
        with:
          submodules: recursive
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}

      - name: Get release version string
        run: |
@@ -12,7 +12,7 @@ on:
        type: string

 permissions:
-  contents: write
+  contents: read
  packages: write

 jobs:
@@ -86,8 +86,6 @@ jobs:
        uses: actions/checkout@v6
        with:
          submodules: recursive
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}

      - name: Get release version string
        run: |
@@ -11,8 +11,7 @@ on:
        type: string

 permissions:
-  contents: write
-  packages: write
+  contents: read

 jobs:
  build-copr-hook:
@@ -22,8 +21,6 @@ jobs:
        uses: actions/checkout@v6
        with:
          submodules: recursive
-          ref: ${{ github.ref }}
-          repository: ${{ github.repository }}

      - name: Trigger COPR build
        uses: vidplace7/copr-build@main
@@ -15,8 +15,7 @@ on:
      - "**.md"
      - version.properties

-  # Note: This is different from "pull_request". Need to specify ref when doing checkouts.
-  pull_request_target:
+  pull_request:
    branches:
      - master
      - develop
@@ -29,6 +28,8 @@ on:

  workflow_dispatch:

+permissions: read-all
+
 jobs:
  setup:
    strategy:
@@ -88,8 +89,6 @@ jobs:
      - uses: actions/checkout@v6
        with:
          submodules: recursive
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
      - name: Check ${{ matrix.check.board }}
        uses: meshtastic/gh-action-firmware@main
        with:
@@ -126,9 +125,16 @@ jobs:

  test-native:
    if: ${{ !contains(github.ref_name, 'event/') && github.repository == 'meshtastic/firmware' }}
+    permissions: # Needed for dorny/test-reporter.
+      contents: read
+      actions: read
+      checks: write
    uses: ./.github/workflows/test_native.yml

  docker:
+    permissions: # Needed for pushing to GHCR.
+      contents: read
+      packages: write
    strategy:
      fail-fast: false
      matrix:
@@ -153,9 +159,6 @@ jobs:
  gather-artifacts:
    # trunk-ignore(checkov/CKV2_GHA_1)
    if: github.repository == 'meshtastic/firmware'
-    permissions:
-      contents: write
-      pull-requests: write
    strategy:
      fail-fast: false
      matrix:
@@ -173,9 +176,6 @@ jobs:
    steps:
      - name: Checkout code
        uses: actions/checkout@v6
-        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}

      - uses: actions/download-artifact@v8
        with:
@@ -231,13 +231,6 @@ jobs:
          path: ./*.elf
          retention-days: 30

-      - uses: scruplelesswizard/comment-artifact@main
-        if: ${{ github.event_name == 'pull_request' }}
-        with:
-          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          description: "Download firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
-          github-token: ${{ secrets.GITHUB_TOKEN }}
-
  shame:
    if: github.repository == 'meshtastic/firmware'
    continue-on-error: true
@@ -245,7 +238,7 @@ jobs:
    needs: [build]
    steps:
      - uses: actions/checkout@v6
-        if: github.event_name == 'pull_request_target'
+        if: github.event_name == 'pull_request'
        with:
          filter: blob:none # means we download all the git history but none of the commit (except ones with checkout like the head)
          fetch-depth: 0
@@ -263,24 +256,26 @@ jobs:
          overwrite: true
          path: manifests-new/*.mt.json
      - name: Find the merge base
-        if: github.event_name == 'pull_request_target'
+        if: github.event_name == 'pull_request'
        run: echo "MERGE_BASE=$(git merge-base "origin/$base" "$head")" >> $GITHUB_ENV
        env:
          base: ${{ github.base_ref }}
          head: ${{ github.sha }}
      # Currently broken (for-loop through EVERY artifact -- rate limiting)
      # - name: Download the old manifests
-      #   if: github.event_name == 'pull_request_target'
+      #   if: github.event_name == 'pull_request'
      #   run: gh run download -R "$repo" --name "manifests-$merge_base" --dir manifest-old/
      #   env:
      #     GH_TOKEN: ${{ github.token }}
      #     merge_base: ${{ env.MERGE_BASE }}
      #     repo: ${{ github.repository }}
      # - name: Do scan and post comment
-      #   if: github.event_name == 'pull_request_target'
+      #   if: github.event_name == 'pull_request'
      #   run: python3 bin/shame.py ${{ github.event.pull_request.number }} manifests-old/ manifests-new/

  release-artifacts:
+    permissions: # Needed for 'gh release upload'.
+      contents: write
    runs-on: ubuntu-latest
    if: ${{ github.event_name == 'workflow_dispatch' && github.repository == 'meshtastic/firmware' }}
    outputs:
@@ -372,6 +367,8 @@ jobs:
          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}

  release-firmware:
+    permissions: # Needed for 'gh release upload'.
+      contents: write
    strategy:
      fail-fast: false
      matrix:
@@ -1,371 +0,0 @@
-name: Merge Queue
-# Not sure how concurrency works in merge_queue, removing for now.
-# concurrency:
-#   group: merge-queue-${{ github.head_ref || github.run_id }}
-#   cancel-in-progress: true
-on:
-  # Merge group is a special trigger that is used to trigger the workflow when a merge group is created.
-  merge_group:
-
-jobs:
-  setup:
-    strategy:
-      fail-fast: true
-      matrix:
-        arch:
-          - all
-          - check
-    runs-on: ubuntu-24.04
-    steps:
-      - uses: actions/checkout@v6
-      - uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-          cache: pip
-      - run: pip install -U platformio
-      - name: Generate matrix
-        id: jsonStep
-        run: |
-          if [[ "$GITHUB_HEAD_REF" == "" ]]; then
-            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
-          else  
-            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} --level pr)
-          fi
-          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF"
-          echo "${{matrix.arch}}=$TARGETS" >> $GITHUB_OUTPUT
-    outputs:
-      all: ${{ steps.jsonStep.outputs.all }}
-      check: ${{ steps.jsonStep.outputs.check }}
-
-  version:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v6
-      - name: Get release version string
-        run: |
-          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
-        id: version
-        env:
-          BUILD_LOCATION: local
-    outputs:
-      long: ${{ steps.version.outputs.long }}
-      deb: ${{ steps.version.outputs.deb }}
-
-  check:
-    needs: setup
-    strategy:
-      fail-fast: true
-      matrix:
-        check: ${{ fromJson(needs.setup.outputs.check) }}
-
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name != 'workflow_dispatch' }}
-    steps:
-      - uses: actions/checkout@v6
-      - name: Build base
-        id: base
-        uses: ./.github/actions/setup-base
-      - name: Check ${{ matrix.check.board }}
-        run: bin/check-all.sh ${{ matrix.check.board }}
-
-  build:
-    needs: [setup, version]
-    strategy:
-      matrix:
-        build: ${{ fromJson(needs.setup.outputs.all) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.build.board }}
-      platform: ${{ matrix.build.platform }}
-
-  build-debian-src:
-    if: github.repository == 'meshtastic/firmware'
-    uses: ./.github/workflows/build_debian_src.yml
-    with:
-      series: UNRELEASED
-      build_location: local
-    secrets: inherit
-
-  package-pio-deps-native-tft:
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    uses: ./.github/workflows/package_pio_deps.yml
-    with:
-      pio_env: native-tft
-    secrets: inherit
-
-  test-native:
-    if: ${{ !contains(github.ref_name, 'event/') }}
-    uses: ./.github/workflows/test_native.yml
-
-  docker:
-    strategy:
-      fail-fast: false
-      matrix:
-        distro: [debian, alpine]
-        platform: [linux/amd64, linux/arm64, linux/arm/v7]
-        pio_env: [native, native-tft]
-        exclude:
-          - distro: alpine
-            platform: linux/arm/v7
-          - pio_env: native-tft
-            platform: linux/arm64
-          - pio_env: native-tft
-            platform: linux/arm/v7
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: ${{ matrix.distro }}
-      platform: ${{ matrix.platform }}
-      runs-on: ${{ contains(matrix.platform, 'arm') && 'ubuntu-24.04-arm' || 'ubuntu-24.04' }}
-      pio_env: ${{ matrix.pio_env }}
-      push: false
-
-  gather-artifacts:
-    # trunk-ignore(checkov/CKV2_GHA_1)
-    permissions:
-      contents: write
-      pull-requests: write
-    strategy:
-      fail-fast: false
-      matrix:
-        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-    runs-on: ubuntu-latest
-    needs: [version, build]
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v6
-        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - uses: actions/download-artifact@v8
-        with:
-          path: ./
-          pattern: firmware-${{matrix.arch}}-*
-          merge-multiple: true
-
-      - name: Display structure of downloaded files
-        run: ls -R
-
-      - name: Move files up
-        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
-
-      - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v7
-        with:
-          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          overwrite: true
-          path: |
-            ./firmware-*.bin
-            ./firmware-*.uf2
-            ./firmware-*.hex
-            ./firmware-*.zip
-            ./device-*.sh
-            ./device-*.bat
-            ./littlefs-*.bin
-            ./bleota*bin
-            ./Meshtastic_nRF52_factory_erase*.uf2
-          retention-days: 30
-
-      - uses: actions/download-artifact@v8
-        with:
-          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output
-
-      # For diagnostics
-      - name: Show artifacts
-        run: ls -lR
-
-      - name: Device scripts permissions
-        run: |
-          chmod +x ./output/device-install.sh || true
-          chmod +x ./output/device-update.sh || true
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
-
-      - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v7
-        with:
-          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          overwrite: true
-          path: ./*.elf
-          retention-days: 30
-
-      - uses: scruplelesswizard/comment-artifact@main
-        if: ${{ github.event_name == 'pull_request' }}
-        with:
-          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          description: "Download firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
-          github-token: ${{ secrets.GITHUB_TOKEN }}
-
-  release-artifacts:
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    outputs:
-      upload_url: ${{ steps.create_release.outputs.upload_url }}
-    needs:
-      - version
-      - gather-artifacts
-      - build-debian-src
-      - package-pio-deps-native-tft
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v6
-
-      - name: Create release
-        uses: softprops/action-gh-release@v2
-        id: create_release
-        with:
-          draft: true
-          prerelease: true
-          name: Meshtastic Firmware ${{ needs.version.outputs.long }} Alpha
-          tag_name: v${{ needs.version.outputs.long }}
-          body: |
-            Autogenerated by github action, developer should edit as required before publishing...
-
-      - name: Download source deb
-        uses: actions/download-artifact@v8
-        with:
-          pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
-          merge-multiple: true
-          path: ./output/debian-src
-
-      - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v8
-        with:
-          pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output/pio-deps-native-tft
-
-      - name: Zip Linux sources
-        working-directory: output
-        run: |
-          zip -j -9 -r ./meshtasticd-${{ needs.version.outputs.deb }}-src.zip ./debian-src
-          zip -9 -r ./platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip ./pio-deps-native-tft
-
-      # For diagnostics
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Add Linux sources to GtiHub Release
-        # Only run when targeting master branch with workflow_dispatch
-        if: ${{ github.ref_name == 'master' }}
-        run: |
-          gh release upload v${{ needs.version.outputs.long }} ./output/meshtasticd-${{ needs.version.outputs.deb }}-src.zip
-          gh release upload v${{ needs.version.outputs.long }} ./output/platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-  release-firmware:
-    strategy:
-      fail-fast: false
-      matrix:
-        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [release-artifacts, version]
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v6
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - uses: actions/download-artifact@v8
-        with:
-          pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output
-
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Device scripts permissions
-        run: |
-          chmod +x ./output/device-install.sh || true
-          chmod +x ./output/device-update.sh || true
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
-
-      - uses: actions/download-artifact@v8
-        with:
-          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./elfs
-
-      - name: Zip debug elfs
-        run: zip -j -9 -r ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./elfs
-
-      # For diagnostics
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Add bins and debug elfs to GitHub Release
-        # Only run when targeting master branch with workflow_dispatch
-        if: ${{ github.ref_name == 'master' }}
-        run: |
-          gh release upload v${{ needs.version.outputs.long }} ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
-          gh release upload v${{ needs.version.outputs.long }} ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-  publish-firmware:
-    runs-on: ubuntu-24.04
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [release-firmware, version]
-    env:
-      targets: |-
-        esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v6
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - uses: actions/download-artifact@v8
-        with:
-          pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./publish
-
-      - name: Publish firmware to meshtastic.github.io
-        uses: peaceiris/actions-gh-pages@v4
-        env:
-          # On event/* branches, use the event name as the destination prefix
-          DEST_PREFIX: ${{ contains(github.ref_name, 'event/') && format('{0}/', github.ref_name) || '' }}
-        with:
-          deploy_key: ${{ secrets.DIST_PAGES_DEPLOY_KEY }}
-          external_repository: meshtastic/meshtastic.github.io
-          publish_branch: master
-          publish_dir: ./publish
-          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ needs.version.outputs.long }}
-          keep_files: true
-          user_name: github-actions[bot]
-          user_email: github-actions[bot]@users.noreply.github.com
-          commit_message: ${{ needs.version.outputs.long }}
-          enable_jekyll: true
@@ -18,8 +18,7 @@ on:
        type: string

 permissions:
-  contents: write
-  packages: write
+  contents: read

 jobs:
  build-debian-src:
@@ -16,8 +16,7 @@ on:
        type: string

 permissions:
-  contents: write
-  packages: write
+  contents: read

 jobs:
  pkg-pio-libdeps:
@@ -27,8 +26,6 @@ jobs:
        uses: actions/checkout@v6
        with:
          submodules: recursive
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}

      - name: Setup Python
        uses: actions/setup-python@v6
@@ -16,8 +16,7 @@ on:
        type: string

 permissions:
-  contents: write
-  packages: write
+  contents: read

 jobs:
  build-debian-src:
@@ -36,8 +35,6 @@ jobs:
        with:
          submodules: recursive
          path: meshtasticd
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}

      - name: Install deps
        shell: bash
@@ -70,5 +67,6 @@ jobs:

      - name: Publish with dput
        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
+        timeout-minutes: 15 # dput is terrible, sometimes runs 'forever'
        run: |
          dput ${{ inputs.ppa_repo }} meshtasticd_${{ steps.version.outputs.deb }}~${{ inputs.series }}_source.changes
@@ -16,8 +16,6 @@ jobs:
    steps:
      - uses: actions/checkout@v6
        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
          submodules: recursive

      - name: Setup native build
@@ -72,8 +70,6 @@ jobs:
    steps:
      - uses: actions/checkout@v6
        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
          submodules: recursive

      - name: Setup native build
@@ -128,9 +124,6 @@ jobs:
    if: always()
    steps:
      - uses: actions/checkout@v6
-        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}

      - name: Get release version string
        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
@@ -143,7 +136,7 @@ jobs:
          merge-multiple: true

      - name: Test Report
-        uses: dorny/test-reporter@v2.6.0
+        uses: dorny/test-reporter@v3.0.0
        with:
          name: PlatformIO Tests
          path: testreport.xml
@@ -6,7 +6,7 @@ permissions: read-all
 jobs:
  update-protobufs:
    runs-on: ubuntu-latest
-    permissions:
+    permissions: # Needed for peter-evans/create-pull-request.
      contents: write
      pull-requests: write
    steps:
@@ -8,27 +8,27 @@ plugins:
      uri: https://github.com/trunk-io/plugins
 lint:
  enabled:
-    - checkov@3.2.510
-    - renovate@43.84.0
+    - checkov@3.2.513
+    - renovate@43.104.1
    - prettier@3.8.1
-    - trufflehog@3.93.8
+    - trufflehog@3.94.2
    - yamllint@1.38.0
    - bandit@1.9.4
    - trivy@0.69.3
    - taplo@0.10.0
-    - ruff@0.15.7
+    - ruff@0.15.9
    - isort@8.0.1
    - markdownlint@0.48.0
    - oxipng@10.1.0
    - svgo@4.0.1
-    - actionlint@1.7.11
+    - actionlint@1.7.12
    - flake8@7.3.0
    - hadolint@2.14.0
    - shfmt@3.6.0
    - shellcheck@0.11.0
    - black@26.3.1
    - git-diff-check
-    - gitleaks@8.30.0
+    - gitleaks@8.30.1
    - clang-format@16.0.3
  ignore:
    - linters: [ALL]
@@ -1,3 +1,9 @@
+Meta:
+  name: BananaPi-BPI-R4-sx1262
+  support: community
+  compatible:
+    - bananapi_bpi-r4 # OpenWrt target
+
 Lora:
  Module: sx1262  # BananaPi-BPI-R4 SPI via 26p GPIO Header
 ##  CS: 28
@@ -1,4 +1,10 @@
 ##  https://www.mikroe.com/lr-iot-click
+Meta:
+  name: OpenWRT One mikroBUS LR-IOT-CLICK
+  support: community
+  compatible:
+    - openwrt_one # OpenWrt target
+
 Lora:
  Module: lr1110  # OpenWRT ONE mikroBUS with LR-IOT-CLICK
 #  CS: 25
@@ -1,3 +1,9 @@
+Meta:
+  name: OpenWRT One mikroBUS sx1262
+  support: community
+  compatible:
+    - openwrt_one # OpenWrt target
+
 Lora:
  Module: sx1262
  IRQ: 10
@@ -0,0 +1,28 @@
+# meshtasticd configuration files
+
+This directory contains YAML configuration files for meshtasticd. Each file describes a specific hardware configuration, including the LoRa module and pin assignments. These configurations are used by meshtasticd to correctly interface with the hardware.
+
+## Metadata structure
+
+Each configuration file includes a `Meta` section that provides information about the configuration.
+This configuration is consumed by configuration-selection tools.
+
+```yaml
+Meta:
+  name: MeshAdv-Pi E22-900M30S # A unique identifier for this configuration.
+  support: community # community, official, or deprecated; determined by Meshtastic Leads.
+  compatible: # A list of compatible products or platforms.
+    - raspberry-pi
+```
+`name`: A unique identifier for the configuration, typically reflecting the hardware it supports.
+
+`support`: Indicates the level of support for this configuration. It can be one of the following:
+
+- `community`: Supported by the Meshtastic community. Meshtastic Members may not possess, or have not tested this configuration.
+- `official`: Fully supported by Meshtastic. Meshtastic Members have tested and verified this configuration.
+- `deprecated`: No longer recommended for deployment by Meshtastic.
+
+`compatible`: A list of compatible products or platforms that can use this configuration.
+This will vary depending on the intended use case / platform.
+Multiple compatible entries can be included. E.g. Armbian `BOARD` value or OpenWrt `TARGET` value.
+These tags can be consumed by different configuration-selection tools, filtering based upon their platform/etc.
@@ -1,3 +1,9 @@
+Meta:
+  name: Waveshare 1.44inch LCD HAT
+  support: community
+  compatible:
+    - raspberry-pi
+
 ### Waveshare 1.44inch LCD HAT
 Display:
  Panel: ST7735S
@@ -1,3 +1,9 @@
+Meta:
+  name: Waveshare 2.8inch LCD HAT
+  support: community
+  compatible:
+    - raspberry-pi
+
 Display:

 ### Waveshare 2.8inch RPi LCD
@@ -1,3 +1,9 @@
+Meta:
+  name: Adafruit RFM9x
+  support: deprecated
+  compatible:
+    - raspberry-pi
+
 Lora:
  Module: RF95  # Adafruit RFM9x
  Reset: 25
@@ -1,5 +1,11 @@
 # MeshAdv-Pi E22-900M30S
 # https://github.com/chrismyers2000/MeshAdv-Pi-Hat
+Meta:
+  name: MeshAdv-Pi E22-900M30S
+  support: community
+  compatible:
+    - raspberry-pi
+
 Lora:
  Module: sx1262
  CS: 21
@@ -1,5 +1,11 @@
 # MeshAdv Mini E22-900M22S
 # https://github.com/chrismyers2000/MeshAdv-Mini
+Meta:
+  name: MeshAdv Mini E22-900M22S
+  support: community
+  compatible:
+    - raspberry-pi
+
 Lora:
  Module: sx1262  # Ebyte E22-900M22S 
  CS: 8
@@ -1,6 +1,12 @@
+Meta:
+  name: RAK6421 + RAK13300 Slot 1
+  support: official
+  compatible:
+    - raspberry-pi
+
 Lora:

-  ### RAK13300in Slot 1
+  ### RAK13300 in Slot 1
  Module: sx1262
  IRQ: 22 #IO6
  Reset: 16 # IO4
@@ -1,5 +1,11 @@
+Meta:
+  name: RAK6421 + RAK13300 Slot 2
+  support: official
+  compatible:
+    - raspberry-pi
+
 Lora:
-  ### RAK13300in Slot 2 pins
+  ### RAK13300 in Slot 2 pins
  IRQ: 18 #IO6
  Reset: 24 # IO4
  Busy: 19 # IO5
@@ -1,6 +1,12 @@
+Meta:
+  name: RAK6421 + RAK13302 Slot 1
+  support: official
+  compatible:
+    - raspberry-pi
+
 Lora:

-  ### RAK13300in Slot 1
+  ### RAK13302 in Slot 1
  Module: sx1262
  IRQ: 22 #IO6
  Reset: 16 # IO4
@@ -1,5 +1,11 @@
+Meta:
+  name: RAK6421 + RAK13302 Slot 2
+  support: official
+  compatible:
+    - raspberry-pi
+
 Lora:
-  ### RAK13300in Slot 2 pins
+  ### RAK13302 in Slot 2 pins
  IRQ: 18 #IO6
  Reset: 24 # IO4
  Busy: 19 # IO5
@@ -1,20 +1,22 @@
---
-Lora:
-## Ebyte E80-900M22S
-## This is a bit experimental
-## 
-##
-  Module: lr1121
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO3_TCXO_VOLTAGE: 1.8
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1
-
-
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
-  
-General:
-  MACAddressSource: eth0
+---
+Meta:
+  name: Femtofox Ebyte E80-900M22S with TCXO
+  support: community
+  compatible:
+    - luckfox-pico-mini # Armbian
+
+Lora:
+## Ebyte E80-900M22S
+## This is a bit experimental
+## 
+##
+  Module: lr1121
+  gpiochip: 1 # subtract 32 from the gpio numbers
+  DIO3_TCXO_VOLTAGE: 1.8
+  CS: 16 #pin6 / GPIO48 1C0
+  IRQ: 23  #pin17 / GPIO55 1C7
+  Busy: 22 #pin16 / GPIO54 1C6
+  Reset: 25 #pin13 / GPIO57 1D1
+
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
+  spiSpeed: 2000000
@@ -1,21 +1,24 @@
---
-Lora:
-## Ebyte E22-900M30S, E22-900M22S with or without external RF switching setup
-## HT-RA62 (Has internal switching, but whatever)
-## Seeed WIO SX1262 (already has TXEN-DIO2 link, but needs RXEN)
-## Will work with any module with or without RF switching, and with TCXO
-  Module: sx1262
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1
-  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
-#  TXen: bridge to DIO2 on E22 module
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
-  
-General:
-  MACAddressSource: eth0
+---
+Meta:
+  name: Femtofox SX1262 TCXO
+  support: community
+  compatible:
+    - luckfox-pico-mini # Armbian
+
+Lora:
+## Ebyte E22-900M30S, E22-900M22S with or without external RF switching setup
+## HT-RA62 (Has internal switching, but whatever)
+## Seeed WIO SX1262 (already has TXEN-DIO2 link, but needs RXEN)
+## Will work with any module with or without RF switching, and with TCXO
+  Module: sx1262
+  gpiochip: 1 # subtract 32 from the gpio numbers
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true
+  CS: 16 #pin6 / GPIO48 1C0
+  IRQ: 23  #pin17 / GPIO55 1C7
+  Busy: 22 #pin16 / GPIO54 1C6
+  Reset: 25 #pin13 / GPIO57 1D1
+  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
+#  TXen: bridge to DIO2 on E22 module
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
+  spiSpeed: 2000000
@@ -1,21 +1,24 @@
---
-Lora:
-## Ebyte E22-900MM22S with no external RF switching setup
-## Waveshare SX126X XXXM, AI Thinker RA-01SH
-## Will work with any module with or without RF switching and no TCXO
-
-  Module: sx1262  
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: false
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1 
-  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
-#  TXen: bridge to DIO2 on E22 module
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
-
-General:
-  MACAddressSource: eth0
+---
+Meta:
+  name: Femtofox SX1262 XTAL
+  support: community
+  compatible:
+    - luckfox-pico-mini # Armbian
+
+Lora:
+## Ebyte E22-900MM22S with no external RF switching setup
+## Waveshare SX126X XXXM, AI Thinker RA-01SH
+## Will work with any module with or without RF switching and no TCXO
+
+  Module: sx1262  
+  gpiochip: 1 # subtract 32 from the gpio numbers
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: false
+  CS: 16 #pin6 / GPIO48 1C0
+  IRQ: 23  #pin17 / GPIO55 1C7
+  Busy: 22 #pin16 / GPIO54 1C6
+  Reset: 25 #pin13 / GPIO57 1D1 
+  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
+#  TXen: bridge to DIO2 on E22 module
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
+  spiSpeed: 2000000
@@ -1,6 +1,12 @@
+Meta:
+  name: RAK6421 + RAK13300 Slot 1 (Autoconf default)
+  support: official
+  compatible:
+    - raspberry-pi
+
 Lora:

-  ### RAK13300in Slot 1
+  ### RAK13300 in Slot 1
  Module: sx1262
  IRQ: 22 #IO6
  Reset: 16 # IO4
@@ -1,3 +1,9 @@
+Meta:
+  name: Luckfox Lyra PicoCalc Wio LoRa SX1262
+  support: official
+  compatible:
+    - luckfox-lyra-plus # Armbian
+
 Lora:
  Module: sx1262
  DIO2_AS_RF_SWITCH: true
@@ -2,6 +2,13 @@
 # Enable overlay 'luckfox-lyra-ultra-w-spi0-cs0-spidev' with armbian-config
 # https://github.com/wehooper4/Meshtastic-Hardware/tree/main/Luckfox%20Ultra%20Hat
 # 1 Watt Lyra Ultra hat
+Meta:
+  name: wehooper4 Luckfox Ultra 1W
+  support: community
+  compatible:
+    - luckfox-pico-ultra # Armbian
+    - luckfox-lyra-ultra # Armbian
+
 Lora:
  Module: sx1262
  DIO2_AS_RF_SWITCH: true
@@ -2,6 +2,13 @@
 # Enable overlay 'luckfox-lyra-ultra-w-spi0-cs0-spidev' with armbian-config
 # https://github.com/wehooper4/Meshtastic-Hardware/tree/main/Luckfox%20Ultra%20Hat
 # 2 Watt Lyra Ultra hat
+Meta:
+  name: wehooper4 Luckfox Ultra 2W
+  support: community
+  compatible:
+    - luckfox-pico-ultra # Armbian
+    - luckfox-lyra-ultra # Armbian
+
 Lora:
  Module: sx1262
  DIO2_AS_RF_SWITCH: true
@@ -2,6 +2,12 @@
 # Enable overlay 'luckfox-lyra-plus-spi0-cs0_rmio13-spidev' with armbian-config
 # Waveshare LoRa HAT for Raspberry Pi Pico
 # https://www.waveshare.com/wiki/Pico-LoRa-SX1262
+Meta:
+  name: Waveshare LoRa HAT for Raspberry Pi Pico
+  support: community
+  compatible:
+    - luckfox-lyra-plus # Armbian
+
 Lora:
  Module: sx1262
  DIO2_AS_RF_SWITCH: true
@@ -1,3 +1,9 @@
+Meta:
+  name: Lora Meshstick SX1262
+  support: official
+  compatible:
+    - usb
+
 Lora:
  Module: sx1262
  CS: 0
@@ -1,3 +1,9 @@
+Meta:
+  name: Lora Meshstick SX1262
+  support: community
+  compatible:
+    - usb
+
 Lora:
  Module: lr1121
  CS: 0
@@ -1,5 +1,11 @@
+Meta:
+  name: Pinedio USB SX1262
+  support: deprecated
+  compatible:
+    - usb
+
 Lora:
  Module: sx1262
  CS: 0 
  IRQ: 10
-  spidev: ch341
+  spidev: ch341
@@ -1,3 +1,9 @@
+Meta:
+  name: raxda-rock2f-starter-edition-hat
+  support: community
+  compatible:
+    - rock-2f # Armbian
+
 Lora:

 ### Raxda Rock 2F running Armbian Linux 6.1.99-vendor-rk35xx
@@ -1,5 +1,11 @@
 # https://www.waveshare.com/core1262-868m.htm
 # https://github.com/markbirss/lora-starter-edition-sx1262-i2c
+Meta:
+  name: lora-starter-edition-sx1262-i2c
+  support: community
+  compatible:
+    - raspberry-pi
+
 Lora:
  Module: sx1262  # Starter Edition SX1262 I2C Raspberry Pi HAT
  DIO2_AS_RF_SWITCH: true
@@ -1,3 +1,9 @@
+Meta:
+  name: meshstick-1262
+  support: official
+  compatible:
+    - usb
+
 Lora:
  Module: sx1262
  CS: 0
@@ -1,3 +1,9 @@
+Meta:
+  name: meshtoad-e22
+  support: official
+  compatible:
+    - usb
+
 Lora:
  Module: sx1262
  CS: 0
@@ -1,3 +1,9 @@
+Meta:
+  name: umesh-1262-30dbm
+  support: community
+  compatible:
+    - clockwork-uconsole
+
 Lora:
  Module: sx1262
  CS: 0
@@ -1,3 +1,9 @@
+Meta:
+  name: umesh-1268-30dbm
+  support: community
+  compatible:
+    - clockwork-uconsole
+
 Lora:
  Module: sx1268
  CS: 0
@@ -1,3 +1,9 @@
+Meta:
+  name: Waveshare SX1262
+  support: deprecated
+  compatible:
+    - raspberry-pi
+
 Lora:
  Module: sx1262  # Waveshare SX126X XXXM
  DIO2_AS_RF_SWITCH: true
@@ -1,5 +1,12 @@
 # https://www.waveshare.com/pico-lora-sx1262-868m.htm
 # https://github.com/markbirss/lora-ws-raspberry-pi-pico-to-rpi-adapter
+
+Meta:
+  name: ws-raspberry-pico-to-rpi-adapter
+  support: community
+  compatible:
+    - raspberry-pi
+
 Lora:
  Module: sx1262  # Waveshare Raspberry Pi Pico to Raspberry Pi HAT Adapter
  DIO2_AS_RF_SWITCH: true
@@ -15,6 +15,12 @@
 #   5     CS          24
 #   26    DIO1/IRQ    26

+Meta:
+  name: ws-raspberry-pico-to-orangepi-03
+  support: community
+  compatible:
+    - orange-pi-zero-3 # Armbian
+
 Lora:
  Module: sx1262  # Waveshare Raspberry Pico Lora module
  DIO2_AS_RF_SWITCH: true
@@ -43,7 +43,7 @@ for pio_env in pio_envs:
  env = {
    "ci": {"board": pio_env, "platform": env_platform},
    "board_level": cfg.get(f"env:{pio_env}", "board_level", default=None),
-    "board_check": bool(cfg.get(f"env:{pio_env}", "board_check", default=False)),
+    "board_check": cfg.get(f"env:{pio_env}", "board_check", default="false").strip().lower() == "true",
  }
  all_envs.append(env)

@@ -0,0 +1,54 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x4405"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x2886", "0x1667"]
+    ],
+    "usb_product": "HT-n5262G",
+    "mcu": "nrf52840",
+    "variant": "heltec_mesh_node_t096",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "Heltec nrf (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://heltec.org/",
+  "vendor": "Heltec"
+}
@@ -0,0 +1,38 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "memory_type": "qio_opi",
+      "partitions": "default_16MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=0",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "esp32s3"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "LilyGo T5-ePaper-S3",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 16777216,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://lilygo.cc/products/t5-e-paper-s3-pro",
+  "vendor": "LILYGO"
+}
@@ -0,0 +1,29 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32_out.ld"
+    },
+    "core": "esp32",
+    "extra_flags": "-DARDUINO_T_Beam",
+    "f_cpu": "240000000L",
+    "f_flash": "40000000L",
+    "flash_mode": "dio",
+    "mcu": "esp32",
+    "variant": "tbeam"
+  },
+  "connectivity": ["wifi", "bluetooth", "can", "ethernet"],
+  "debug": {
+    "openocd_board": "esp-wroom-32.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "TTGO T-Beam (PSRAM Disabled)",
+  "upload": {
+    "flash_size": "4MB",
+    "maximum_ram_size": 1310720,
+    "maximum_size": 4194304,
+    "require_upload_port": true,
+    "speed": 460800
+  },
+  "url": "https://github.com/LilyGO/TTGO-T-Beam",
+  "vendor": "TTGO"
+}
@@ -27,5 +27,10 @@ rm -rf debian/changelog
 dch --create --distribution "$SERIES" --package "$package" --newversion "$PKG_VERSION~$SERIES" \
 	"GitHub Actions Automatic packaging for $PKG_VERSION~$SERIES"

-# Build the source deb
-debuild -S -nc -k"$GPG_KEY_ID"
+if [[ -n $GPG_KEY_ID ]]; then
+	# Build and sign the source deb
+	debuild -S -nc -k"$GPG_KEY_ID"
+else
+	# Build the source deb without signing (forks)
+	debuild -S -nc
+fi
@@ -77,10 +77,10 @@ lib_deps =
 	https://github.com/meshtastic/TinyGPSPlus/archive/71a82db35f3b973440044c476d4bcdc673b104f4.zip
 	# renovate: datasource=git-refs depName=meshtastic-ArduinoThread packageName=https://github.com/meshtastic/ArduinoThread gitBranch=master
 	https://github.com/meshtastic/ArduinoThread/archive/b841b0415721f1341ea41cccfb4adccfaf951567.zip
-	# renovate: datasource=custom.pio depName=Nanopb packageName=nanopb/library/Nanopb
-	nanopb/Nanopb@0.4.91
-	# renovate: datasource=custom.pio depName=ErriezCRC32 packageName=erriez/library/ErriezCRC32
-	erriez/ErriezCRC32@1.0.1
+	# renovate: datasource=github-tags depName=Nanopb packageName=nanopb/nanopb
+	https://github.com/nanopb/nanopb/archive/refs/tags/nanopb-0.4.9.1.zip
+	# renovate: datasource=github-tags depName=ErriezCRC32 packageName=Erriez/ErriezCRC32
+	https://github.com/Erriez/ErriezCRC32/archive/refs/tags/1.0.1.zip

 ; Used for the code analysis in PIO Home / Inspect
 check_tool = cppcheck
@@ -95,8 +95,8 @@ check_flags =
 framework = arduino
 lib_deps =
 	${env.lib_deps}
-	# renovate: datasource=custom.pio depName=NonBlockingRTTTL packageName=end2endzone/library/NonBlockingRTTTL
-	end2endzone/NonBlockingRTTTL@1.4.0
+	# renovate: datasource=github-tags depName=NonBlockingRTTTL packageName=end2endzone/NonBlockingRTTTL
+	https://github.com/end2endzone/NonBlockingRTTTL/archive/refs/tags/1.4.0.zip
 build_unflags =
 	-std=c++11
 	-std=gnu++11
@@ -107,26 +107,26 @@ build_src_filter = ${env.build_src_filter} -<platform/portduino/> -<graphics/nic
 ; Common libs for communicating over TCP/IP networks such as MQTT
 [networking_base]
 lib_deps =
-	# renovate: datasource=custom.pio depName=TBPubSubClient packageName=thingsboard/library/TBPubSubClient
-	thingsboard/TBPubSubClient@2.12.1
-	# renovate: datasource=custom.pio depName=NTPClient packageName=arduino-libraries/library/NTPClient
-	arduino-libraries/NTPClient@3.2.1
+	# renovate: datasource=github-tags depName=TBPubSubClient packageName=thingsboard/pubsubclient
+	https://github.com/thingsboard/pubsubclient/archive/refs/tags/v2.12.1.zip
+	# renovate: datasource=github-tags depName=NTPClient packageName=arduino-libraries/NTPClient
+	https://github.com/arduino-libraries/NTPClient/archive/refs/tags/3.2.1.zip

 ; Extra TCP/IP networking libs for supported devices
 [networking_extra]
 lib_deps =
-	# renovate: datasource=custom.pio depName=Syslog packageName=arcao/library/Syslog
-	arcao/Syslog@2.0.0
+	# renovate: datasource=github-tags depName=Syslog packageName=arcao/Syslog
+	https://github.com/arcao/Syslog/archive/refs/tags/v2.0.zip

 [radiolib_base]
 lib_deps =
-	# renovate: datasource=custom.pio depName=RadioLib packageName=jgromes/library/RadioLib
-	jgromes/RadioLib@7.6.0
+	# renovate: datasource=github-tags depName=RadioLib packageName=jgromes/RadioLib
+	https://github.com/jgromes/RadioLib/archive/refs/tags/7.6.0.zip

 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/f36d2a953524e372b78c5b4147ec55f38716964e.zip
+	https://github.com/meshtastic/device-ui/archive/1897dd17fceb1f101bb1a3245680aa3439edcfdd.zip

 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
@@ -233,5 +233,5 @@ lib_deps =
 [environmental_extra_no_bsec]
 lib_deps =
 	${environmental_extra_common.lib_deps}
-	# renovate: datasource=custom.pio depName=adafruit/Adafruit BME680 Library packageName=adafruit/library/Adafruit BME680
-	adafruit/Adafruit BME680 Library@^2.0.5
+	# renovate: datasource=custom.pio depName=Adafruit_BME680 packageName=adafruit/library/Adafruit BME680 Library
+	adafruit/Adafruit BME680 Library@2.0.6
@@ -4,6 +4,8 @@
    ":dependencyDashboard",
    ":semanticCommitTypeAll(chore)",
    ":ignoreModulesAndTests",
+    ":noUnscheduledUpdates",
+    "schedule:daily",
    "group:recommended",
    "replacements:all",
    "workarounds:all"
@@ -98,7 +98,6 @@ Syslog &Syslog::logMask(uint8_t priMask)

 void Syslog::enable()
 {
-    this->_client->begin(this->_port);
    this->_enabled = true;
 }

@@ -166,14 +165,21 @@ inline bool Syslog::_sendLog(uint16_t pri, const char *appName, const char *mess
    if ((pri & LOG_FACMASK) == 0)
        pri = LOG_MAKEPRI(LOG_FAC(this->_priDefault), pri);

+    // W5100S: acquire UDP socket on-demand to avoid permanent socket consumption
+    if (!this->_client->begin(this->_port)) {
+        return false;
+    }
+
    if (this->_server != NULL) {
        result = this->_client->beginPacket(this->_server, this->_port);
    } else {
        result = this->_client->beginPacket(this->_ip, this->_port);
    }

-    if (result != 1)
+    if (result != 1) {
+        this->_client->stop();
        return false;
+    }

    this->_client->print('<');
    this->_client->print(pri);
@@ -193,6 +199,8 @@ inline bool Syslog::_sendLog(uint16_t pri, const char *appName, const char *mess
    this->_client->print(message);
    this->_client->endPacket();

+    this->_client->stop(); // W5100S: release UDP socket for other services
+
    return true;
 }

@@ -35,6 +35,11 @@
 #include "nrfx_power.h"
 #endif

+#if defined(ARCH_NRF52)
+#include "Nrf52SaadcLock.h"
+#include "concurrency/LockGuard.h"
+#endif
+
 #if defined(DEBUG_HEAP_MQTT) && !MESHTASTIC_EXCLUDE_MQTT
 #include "mqtt/MQTT.h"
 #include "target_specific.h"
@@ -328,6 +333,9 @@ class AnalogBatteryLevel : public HasBatteryLevel
            scaled = esp_adc_cal_raw_to_voltage(raw, adc_characs);
            scaled *= operativeAdcMultiplier;
 #else // block for all other platforms
+#ifdef ARCH_NRF52
+            concurrency::LockGuard saadcGuard(concurrency::nrf52SaadcLock);
+#endif
            for (uint32_t i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
                raw += analogRead(BATTERY_PIN);
            }
@@ -6,6 +6,11 @@
 #include "Tone.h"
 #endif

+#if defined(HAS_I2S)
+#include "main.h"
+#include <unordered_map>
+#endif
+
 #if !defined(ARCH_PORTDUINO)
 extern "C" void delay(uint32_t dwMs);
 #endif
@@ -50,6 +55,50 @@ const int DURATION_1_2 = 500;  // 1/2 note
 const int DURATION_3_4 = 750;  // 3/4 note
 const int DURATION_1_1 = 1000; // 1/1 note

+#ifdef HAS_I2S
+void playTonesRTTTL(const ToneDuration *tone_durations, int size)
+{
+    // translate ToneDuration[] to RTTTL string and play using audioThread
+    static std::unordered_map<int, std::string> freqToNote = {
+        {NOTE_C3, "c4"},   {NOTE_CS3, "c#4"}, {NOTE_D3, "d4"},   {NOTE_DS3, "d#4"}, {NOTE_E3, "e4"},   {NOTE_F3, "f4"},
+        {NOTE_FS3, "f#4"}, {NOTE_G3, "g4"},   {NOTE_GS3, "g#4"}, {NOTE_A3, "a4"},   {NOTE_AS3, "a#4"}, {NOTE_B3, "b4"},
+        {NOTE_C4, "c5"},   {NOTE_E4, "e5"},   {NOTE_G4, "g5"},   {NOTE_A4, "a5"},   {NOTE_C5, "c6"},   {NOTE_E5, "e6"},
+        {NOTE_G5, "g6"},   {NOTE_F5, "f6"},   {NOTE_G6, "g7"},   {NOTE_E7, "e8"}};
+
+    char rtttl[128] = "tone:d=32,o=4,b=200:"; // default duration and octave
+    for (int i = 0; i < size; i++) {
+        const auto &td = tone_durations[i];
+        std::string note = "b4";
+        if (freqToNote.find(td.frequency_khz) != freqToNote.end()) {
+            note = freqToNote[td.frequency_khz];
+        }
+        int dur = 32; // default duration
+        if (td.duration_ms >= 1000)
+            dur = 1;
+        else if (td.duration_ms >= 500)
+            dur = 2;
+        else if (td.duration_ms >= 250)
+            dur = 4;
+        else if (td.duration_ms >= 125)
+            dur = 8;
+        else if (td.duration_ms >= 62)
+            dur = 16;
+        else
+            dur = 32;
+
+        char noteStr[64];
+        snprintf(noteStr, sizeof(noteStr), "%s,%d", note.c_str(), dur);
+        strncat(rtttl, noteStr, sizeof(rtttl) - strlen(rtttl) - 1);
+
+        audioThread->beginRttl(rtttl, strlen(rtttl));
+        while (audioThread->isPlaying()) {
+            delay(10);
+        }
+        return;
+    }
+}
+#endif
+
 void playTones(const ToneDuration *tone_durations, int size)
 {
    if (config.device.buzzer_mode == meshtastic_Config_DeviceConfig_BuzzerMode_DISABLED ||
@@ -57,7 +106,13 @@ void playTones(const ToneDuration *tone_durations, int size)
        // Buzzer is disabled or not set to system tones
        return;
    }
-#ifdef PIN_BUZZER
+#ifdef HAS_I2S
+    if (moduleConfig.external_notification.use_i2s_as_buzzer && audioThread) {
+        playTonesRTTTL(tone_durations, size);
+        return;
+    }
+#endif
+#if defined(PIN_BUZZER)
    if (!config.device.buzzer_gpio)
        config.device.buzzer_gpio = PIN_BUZZER;
 #endif
@@ -151,8 +151,19 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.

 #ifdef USE_KCT8103L_PA
 // Power Amps are often non-linear, so we can use an array of values for the power curve
+#if defined(HELTEC_WIRELESS_TRACKER_V2)
 #define NUM_PA_POINTS 22
 #define TX_GAIN_LORA 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 13, 13, 13, 12, 12, 11, 10, 9, 8, 7
+#elif defined(HELTEC_MESH_NODE_T096)
+#define NUM_PA_POINTS 22
+#define TX_GAIN_LORA 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 13, 13, 13, 12, 11, 10, 9, 8, 7
+#else
+// If a board enables USE_KCT8103L_PA but does not match a known variant and has
+// not already provided a PA curve, fail at compile time to avoid unsafe defaults.
+#if !defined(NUM_PA_POINTS) || !defined(TX_GAIN_LORA)
+#error "USE_KCT8103L_PA is defined, but no PA gain curve (NUM_PA_POINTS / TX_GAIN_LORA) is configured for this board."
+#endif
+#endif
 #endif

 #ifdef RAK13302
@@ -2,6 +2,7 @@
 #include "configuration.h"
 #include "detect/ScanI2C.h"
 #include "main.h"
+#include "modules/NodeInfoModule.h"
 #include <Throttle.h>
 #include <sys/time.h>
 #include <time.h>
@@ -12,6 +13,14 @@ uint32_t lastSetFromPhoneNtpOrGps = 0;
 static uint32_t lastTimeValidationWarning = 0;
 static const uint32_t TIME_VALIDATION_WARNING_INTERVAL_MS = 15000; // 15 seconds

+static void triggerNodeInfoCheckOnTimeSource(RTCQuality oldQuality, RTCQuality newQuality)
+{
+    if (oldQuality == RTCQualityNone && newQuality > RTCQualityNone && nodeInfoModule) {
+        LOG_DEBUG("Time source acquired (%s -> %s), triggering NodeInfo recheck", RtcName(oldQuality), RtcName(newQuality));
+        nodeInfoModule->triggerImmediateNodeInfoCheck();
+    }
+}
+
 RTCQuality getRTCQuality()
 {
    return currentQuality;
@@ -61,9 +70,11 @@ RTCSetResult readFromRTC()
        LOG_DEBUG("Read RTC time from RV3028 getTime as %02d-%02d-%02d %02d:%02d:%02d (%ld)", t.tm_year + 1900, t.tm_mon + 1,
                  t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec, printableEpoch);
        if (currentQuality == RTCQualityNone) {
+            RTCQuality oldQuality = currentQuality;
            timeStartMsec = now;
            zeroOffsetSecs = tv.tv_sec;
            currentQuality = RTCQualityDevice;
+            triggerNodeInfoCheckOnTimeSource(oldQuality, currentQuality);
        }
        return RTCSetResultSuccess;
    } else {
@@ -105,9 +116,11 @@ RTCSetResult readFromRTC()
        LOG_DEBUG("Read RTC time from %s getDateTime as %02d-%02d-%02d %02d:%02d:%02d (%ld)", rtc.getChipName(), t.tm_year + 1900,
                  t.tm_mon + 1, t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec, printableEpoch);
        if (currentQuality == RTCQualityNone) {
+            RTCQuality oldQuality = currentQuality;
            timeStartMsec = now;
            zeroOffsetSecs = tv.tv_sec;
            currentQuality = RTCQualityDevice;
+            triggerNodeInfoCheckOnTimeSource(oldQuality, currentQuality);
        }
        return RTCSetResultSuccess;
    } else {
@@ -139,9 +152,11 @@ RTCSetResult readFromRTC()
            }
 #endif
            if (currentQuality == RTCQualityNone) {
+                RTCQuality oldQuality = currentQuality;
                timeStartMsec = now;
                zeroOffsetSecs = tv.tv_sec;
                currentQuality = RTCQualityDevice;
+                triggerNodeInfoCheckOnTimeSource(oldQuality, currentQuality);
            }
            return RTCSetResultSuccess;
        }
@@ -214,6 +229,7 @@ RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpd
    }

    if (shouldSet) {
+        RTCQuality oldQuality = currentQuality;
        currentQuality = q;
        lastSetMsec = now;
        if (currentQuality >= RTCQualityNTP) {
@@ -281,6 +297,7 @@ RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpd
 #endif

        readFromRTC();
+        triggerNodeInfoCheckOnTimeSource(oldQuality, currentQuality);
        return RTCSetResultSuccess;
    } else {
        return RTCSetResultNotSet; // RTC was already set with a higher quality time
@@ -397,6 +414,17 @@ uint32_t getValidTime(RTCQuality minQuality, bool local)
    return (currentQuality >= minQuality) ? getTime(local) : 0;
 }

+#ifdef PIO_UNIT_TESTING
+void setBootRelativeTimeForUnitTest(uint32_t secondsSinceBoot)
+{
+    currentQuality = RTCQualityNone;
+    zeroOffsetSecs = 0;
+    timeStartMsec = millis() - (secondsSinceBoot * 1000);
+    lastSetFromPhoneNtpOrGps = 0;
+    lastTimeValidationWarning = 0;
+}
+#endif
+
 time_t gm_mktime(const struct tm *tm)
 {
 #if !MESHTASTIC_EXCLUDE_TZ
@@ -54,6 +54,10 @@ uint32_t getValidTime(RTCQuality minQuality, bool local = false);

 RTCSetResult readFromRTC();

+#ifdef PIO_UNIT_TESTING
+void setBootRelativeTimeForUnitTest(uint32_t secondsSinceBoot);
+#endif
+
 time_t gm_mktime(const struct tm *tm);

 #define SEC_PER_DAY 86400
@@ -1,6 +1,6 @@
 #include "configuration.h"

-#ifdef USE_EINK
+#if defined(USE_EINK) && !defined(USE_EINK_PARALLELDISPLAY)
 #include "EInkDisplay2.h"
 #include "SPILock.h"
 #include "main.h"
@@ -1,6 +1,6 @@
 #pragma once

-#ifdef USE_EINK
+#if defined(USE_EINK) && !defined(USE_EINK_PARALLELDISPLAY)

 #include "GxEPD2_BW.h"
 #include <OLEDDisplay.h>
@@ -0,0 +1,427 @@
+#include "EInkParallelDisplay.h"
+
+#ifdef USE_EINK_PARALLELDISPLAY
+
+#include "Wire.h"
+#include "variant.h"
+#include <Arduino.h>
+#include <atomic>
+#include <stdlib.h>
+#include <string.h>
+
+#include "FastEPD.h"
+
+// Thresholds for choosing partial vs full update
+#ifndef EPD_PARTIAL_THRESHOLD_ROWS
+#define EPD_PARTIAL_THRESHOLD_ROWS 128 // if changed region <= this many rows, prefer partial
+#endif
+#ifndef EPD_FULLSLOW_PERIOD
+#define EPD_FULLSLOW_PERIOD 100 // every N full updates do a slow (CLEAR_SLOW) full refresh
+#endif
+#ifndef EPD_RESPONSIVE_MIN_MS
+#define EPD_RESPONSIVE_MIN_MS 1000 // simple rate-limit (ms) for responsive updates
+#endif
+
+EInkParallelDisplay::EInkParallelDisplay(uint16_t width, uint16_t height, EpdRotation rot) : epaper(nullptr), rotation(rot)
+{
+    LOG_INFO("init EInkParallelDisplay");
+    // Set dimensions in OLEDDisplay base class
+    this->geometry = GEOMETRY_RAWMODE;
+    this->displayWidth = width;
+    this->displayHeight = height;
+
+    // Round shortest side up to nearest byte, to prevent truncation causing an undersized buffer
+    uint16_t shortSide = min(width, height);
+    uint16_t longSide = max(width, height);
+    if (shortSide % 8 != 0)
+        shortSide = (shortSide | 7) + 1;
+
+    this->displayBufferSize = longSide * (shortSide / 8);
+
+#ifdef EINK_LIMIT_GHOSTING_PX
+    // allocate dirty pixel buffer same size as epaper buffers (rowBytes * height)
+    size_t rowBytes = (this->displayWidth + 7) / 8;
+    dirtyPixelsSize = rowBytes * this->displayHeight;
+    dirtyPixels = (uint8_t *)calloc(dirtyPixelsSize, 1);
+    ghostPixelCount = 0;
+#endif
+}
+
+EInkParallelDisplay::~EInkParallelDisplay()
+{
+#ifdef EINK_LIMIT_GHOSTING_PX
+    if (dirtyPixels) {
+        free(dirtyPixels);
+        dirtyPixels = nullptr;
+    }
+#endif
+    // If an async full update is running, wait for it to finish
+    if (asyncFullRunning.load()) {
+        // wait a short while for task to finish
+        for (int i = 0; i < 50 && asyncFullRunning.load(); ++i) {
+            delay(50);
+        }
+        if (asyncTaskHandle) {
+            // Let it finish or delete it
+            vTaskDelete(asyncTaskHandle);
+            asyncTaskHandle = nullptr;
+        }
+    }
+
+    delete epaper;
+}
+
+/*
+ * Called by the OLEDDisplay::init() path.
+ */
+bool EInkParallelDisplay::connect()
+{
+    LOG_INFO("Do EPD init");
+    if (!epaper) {
+        epaper = new FASTEPD;
+#if defined(T5_S3_EPAPER_PRO_V1)
+        epaper->initPanel(BB_PANEL_LILYGO_T5PRO, 28000000);
+#elif defined(T5_S3_EPAPER_PRO_V2)
+        epaper->initPanel(BB_PANEL_LILYGO_T5PRO_V2, 28000000);
+        // initialize all port 0 pins (0-7) as outputs / HIGH
+        for (int i = 0; i < 8; i++) {
+            epaper->ioPinMode(i, OUTPUT);
+            epaper->ioWrite(i, HIGH);
+        }
+#else
+#error "unsupported EPD device!"
+#endif
+    }
+
+    // epaper->setRotation(rotation); // does not work, messes up width/height
+    epaper->setMode(BB_MODE_1BPP);
+    epaper->clearWhite();
+    epaper->fullUpdate(true);
+
+#ifdef EINK_LIMIT_GHOSTING_PX
+    // After a full/clear the dirty tracking should be reset
+    resetGhostPixelTracking();
+#endif
+
+    return true;
+}
+
+/*
+ * sendCommand - simple passthrough (not required for epd_driver-based path)
+ */
+void EInkParallelDisplay::sendCommand(uint8_t com)
+{
+    LOG_DEBUG("EInkParallelDisplay::sendCommand %d", (int)com);
+}
+
+/*
+ * Start a background task that will perform a blocking fullUpdate(). This lets
+ * display() return quickly while the heavy refresh runs in the background.
+ */
+void EInkParallelDisplay::startAsyncFullUpdate(int clearMode)
+{
+    if (asyncFullRunning.load())
+        return; // already running
+
+    asyncFullRunning.store(true);
+    // pass 'this' as parameter
+    BaseType_t rc = xTaskCreatePinnedToCore(EInkParallelDisplay::asyncFullUpdateTask, "epd_full", 4096 / sizeof(StackType_t),
+                                            this, 2, &asyncTaskHandle,
+#if CONFIG_FREERTOS_UNICORE
+                                            0
+#else
+                                            1
+#endif
+    );
+    if (rc != pdPASS) {
+        LOG_WARN("Failed to create async full-update task, falling back to blocking update");
+        epaper->fullUpdate(clearMode, false);
+        epaper->backupPlane();
+        asyncFullRunning.store(false);
+        asyncTaskHandle = nullptr;
+    }
+}
+
+/*
+ * FreeRTOS task entry: runs the full update and then backs up plane.
+ */
+void EInkParallelDisplay::asyncFullUpdateTask(void *pvParameters)
+{
+    EInkParallelDisplay *self = static_cast<EInkParallelDisplay *>(pvParameters);
+    if (!self) {
+        vTaskDelete(nullptr);
+        return;
+    }
+
+    // choose CLEAR_SLOW occasionally
+    int clearMode = CLEAR_FAST;
+    if (self->fastRefreshCount >= EPD_FULLSLOW_PERIOD) {
+        clearMode = CLEAR_SLOW;
+        self->fastRefreshCount = 0;
+    } else {
+        // when running async full, treat it as a full so reset fast count
+        self->fastRefreshCount = 0;
+    }
+
+    self->epaper->fullUpdate(clearMode, false);
+    self->epaper->backupPlane();
+
+#ifdef EINK_LIMIT_GHOSTING_PX
+    // A full refresh clears ghosting state
+    self->resetGhostPixelTracking();
+#endif
+
+    self->asyncFullRunning.store(false);
+    self->asyncTaskHandle = nullptr;
+
+    // delete this task
+    vTaskDelete(nullptr);
+}
+
+/*
+ * Convert the OLEDDisplay buffer (vertical byte layout) into the 1bpp horizontal-bytes
+ * buffer used by the FASTEPD library. For performance we write directly into FASTEPD's
+ * currentBuffer() while comparing against previousBuffer() to detect changed rows.
+ * After conversion we call FASTEPD::partialUpdate() or FASTEPD::fullUpdate() according
+ * to a heuristic so only the minimal region is refreshed.
+ */
+void EInkParallelDisplay::display(void)
+{
+    const uint16_t w = this->displayWidth;
+    const uint16_t h = this->displayHeight;
+
+    // Simple rate limiting: avoid very-frequent responsive updates
+    uint32_t nowMs = millis();
+    if (lastUpdateMs != 0 && (nowMs - lastUpdateMs) < EPD_RESPONSIVE_MIN_MS) {
+        LOG_DEBUG("rate-limited, skipping update");
+        return;
+    }
+
+    // bytes per row in epd format (one byte = 8 horizontal pixels)
+    const uint32_t rowBytes = (w + 7) / 8;
+
+    // Get pointers to internal buffers
+    uint8_t *cur = epaper->currentBuffer();
+    uint8_t *prev = epaper->previousBuffer(); // may be NULL on first init
+
+    // Track changed row range while converting
+    int newTop = h;     // min changed row (initialized to out-of-range)
+    int newBottom = -1; // max changed row
+
+#ifdef FAST_EPD_PARTIAL_UPDATE_BUG
+    // Track changed byte column range (for clipped fullUpdate fallback)
+    int newLeftByte = (int)rowBytes;
+    int newRightByte = -1;
+#endif
+
+    // Compute a quick hash of the incoming OLED buffer (so we can skip identical frames)
+    uint32_t imageHash = 0;
+    uint32_t bufBytes = (w / 8) * h; // vertical-byte layout size
+    for (uint32_t bi = 0; bi < bufBytes; ++bi) {
+        imageHash ^= ((uint32_t)buffer[bi]) << (bi & 31);
+    }
+    if (imageHash == previousImageHash) {
+        // LOG_DEBUG("image identical to previous, skipping update");
+        return;
+    }
+
+#ifdef EINK_LIMIT_GHOSTING_PX
+    // reset ghost count for this conversion pass; we'll mark bits that change
+    ghostPixelCount = 0;
+#endif
+
+    // Convert: OLED buffer layout -> FASTEPD 1bpp horizontal-bytes layout into cur,
+    // comparing against prev when available to detect changes.
+    for (uint32_t y = 0; y < h; ++y) {
+        const uint32_t base = (y >> 3) * w;               // (y/8) * width
+        const uint8_t bitMask = (uint8_t)(1u << (y & 7)); // mask for this row in vertical-byte layout
+        const uint32_t rowBase = y * rowBytes;
+
+        // process full 8-pixel bytes
+        for (uint32_t xb = 0; xb < rowBytes; ++xb) {
+            uint32_t x0 = xb * 8;
+            // read up to 8 source bytes (vertical-byte per column)
+            uint8_t b0 = (x0 + 0 < w) ? buffer[base + x0 + 0] : 0;
+            uint8_t b1 = (x0 + 1 < w) ? buffer[base + x0 + 1] : 0;
+            uint8_t b2 = (x0 + 2 < w) ? buffer[base + x0 + 2] : 0;
+            uint8_t b3 = (x0 + 3 < w) ? buffer[base + x0 + 3] : 0;
+            uint8_t b4 = (x0 + 4 < w) ? buffer[base + x0 + 4] : 0;
+            uint8_t b5 = (x0 + 5 < w) ? buffer[base + x0 + 5] : 0;
+            uint8_t b6 = (x0 + 6 < w) ? buffer[base + x0 + 6] : 0;
+            uint8_t b7 = (x0 + 7 < w) ? buffer[base + x0 + 7] : 0;
+
+            // build output byte: MSB = leftmost pixel
+            uint8_t out = 0;
+            out |= (uint8_t)((b0 & bitMask) ? 0x80 : 0x00);
+            out |= (uint8_t)((b1 & bitMask) ? 0x40 : 0x00);
+            out |= (uint8_t)((b2 & bitMask) ? 0x20 : 0x00);
+            out |= (uint8_t)((b3 & bitMask) ? 0x10 : 0x00);
+            out |= (uint8_t)((b4 & bitMask) ? 0x08 : 0x00);
+            out |= (uint8_t)((b5 & bitMask) ? 0x04 : 0x00);
+            out |= (uint8_t)((b6 & bitMask) ? 0x02 : 0x00);
+            out |= (uint8_t)((b7 & bitMask) ? 0x01 : 0x00);
+
+            // handle partial byte at end of row by masking off invalid bits
+            uint8_t mask = 0xFF;
+            uint32_t bitsRemain = (w > x0) ? (w - x0) : 0;
+            if (bitsRemain > 0 && bitsRemain < 8) {
+                mask = (uint8_t)(0xFF << (8 - bitsRemain));
+                out &= mask;
+            }
+
+            // invert to FASTEPD polarity
+            out = (~out) & mask;
+
+            uint32_t pos = rowBase + xb;
+            uint8_t prevVal = prev ? (prev[pos] & mask) : 0x00;
+            // Consider this byte changed if previous buffer differs (or prev is null)
+            bool changed = (prev == nullptr) || (prevVal != out);
+
+#ifdef EINK_LIMIT_GHOSTING_PX
+            if (changed && prev)
+                markDirtyBits(prev, pos, mask, out);
+#endif
+
+            // mark row changed only if the previous buffer differs
+            if (changed) {
+                if (y < (uint32_t)newTop)
+                    newTop = y;
+                if ((int)y > newBottom)
+                    newBottom = y;
+#ifdef FAST_EPD_PARTIAL_UPDATE_BUG
+                // record changed column bytes
+                if ((int)xb < newLeftByte)
+                    newLeftByte = (int)xb;
+                if ((int)xb > newRightByte)
+                    newRightByte = (int)xb;
+#endif
+            }
+
+            // Always write the computed value into the current buffer (avoid leaving stale bytes)
+            cur[pos] = (cur[pos] & ~mask) | out;
+        }
+    }
+
+    // If nothing changed, avoid any panel update
+    if (newBottom < 0) {
+        LOG_DEBUG("no pixel changes detected, skipping update (conv)");
+        previousImageHash = imageHash; // still remember that frame
+        return;
+    }
+
+    // Choose partial vs full update using heuristic
+    // Decide if we should force a full update after many fast updates
+    bool forceFull = (fastRefreshCount >= EPD_FULLSLOW_PERIOD);
+
+#ifdef EINK_LIMIT_GHOSTING_PX
+    // If ghost pixels exceed limit, force a full update to clear ghosting
+    if (ghostPixelCount > ghostPixelLimit) {
+        LOG_WARN("ghost pixels %u > limit %u, forcing full refresh", ghostPixelCount, ghostPixelLimit);
+        forceFull = true;
+    }
+#endif
+
+    // Compute pixel bounds from newTop/newBottom
+    int startRow = (newTop / 8) * 8;
+    int endRow = (newBottom / 8) * 8 + 7;
+
+    LOG_DEBUG("EPD update rows=%d..%d alignedRows=%d..%d rowBytes=%u", newTop, newBottom, startRow, endRow, rowBytes);
+
+    if (epaper->getMode() == BB_MODE_1BPP && !forceFull && (newBottom - newTop) <= EPD_PARTIAL_THRESHOLD_ROWS) {
+        // Prefer partial update path if driver is reliable; otherwise use clipped fullUpdate fallback.
+#ifdef FAST_EPD_PARTIAL_UPDATE_BUG
+        // Workaround for FastEPD partial update bug: use clipped fullUpdate instead
+        // Build a pixel rectangle for a clipped fullUpdate using the changed columns
+        int startCol = (newLeftByte <= newRightByte) ? (newLeftByte * 8) : 0;
+        int endCol = (newLeftByte <= newRightByte) ? ((newRightByte + 1) * 8 - 1) : (w - 1);
+
+        BB_RECT rect{startCol, startRow, endCol - startCol + 1, endRow - startRow + 1};
+        // LOG_DEBUG("Using clipped fullUpdate rect x=%d y=%d w=%d h=%d", rect.x, rect.y, rect.w, rect.h);
+        epaper->fullUpdate(CLEAR_FAST, false, &rect);
+#else
+        // Use rows for partial update
+        LOG_DEBUG("calling partialUpdate startRow=%d endRow=%d", startRow, endRow);
+        epaper->partialUpdate(true, startRow, endRow);
+#endif
+        epaper->backupPlane();
+        fastRefreshCount++;
+    } else {
+        // Full update: run async if possible (startAsyncFullUpdate will fall back to blocking)
+        startAsyncFullUpdate(forceFull ? CLEAR_SLOW : CLEAR_FAST);
+    }
+
+    lastUpdateMs = millis();
+    previousImageHash = imageHash;
+
+    // Keep same behavior as before
+    lastDrawMsec = millis();
+}
+
+#ifdef EINK_LIMIT_GHOSTING_PX
+// markDirtyBits: mark per-bit dirty flags and update ghostPixelCount
+void EInkParallelDisplay::markDirtyBits(const uint8_t *prevBuf, uint32_t pos, uint8_t mask, uint8_t out)
+{
+    // defensive: need dirtyPixels allocated and prevBuf valid
+    if (!dirtyPixels || !prevBuf)
+        return;
+
+    // 'out' is in FASTEPD polarity (1 = black, 0 = white)
+    uint8_t newBlack = out & mask;    // bits that will be black now
+    uint8_t newWhite = (~out) & mask; // bits that will be white now
+
+    // previously recorded dirty bits for this byte
+    uint8_t before = dirtyPixels[pos];
+
+    // Ghost bits: bits that were previously marked dirty and are now being driven white
+    uint8_t ghostBits = before & newWhite;
+    if (ghostBits) {
+        ghostPixelCount += __builtin_popcount((unsigned)ghostBits);
+    }
+
+    // Only mark bits dirty when they turn black now (accumulate until a full refresh)
+    uint8_t newlyDirty = newBlack & (~before);
+    if (newlyDirty) {
+        dirtyPixels[pos] |= newlyDirty;
+    }
+}
+
+// reset ghost tracking (call after a full refresh)
+void EInkParallelDisplay::resetGhostPixelTracking()
+{
+    if (!dirtyPixels)
+        return;
+    memset(dirtyPixels, 0, dirtyPixelsSize);
+    ghostPixelCount = 0;
+}
+#endif
+
+/*
+ * forceDisplay: use lastDrawMsec
+ */
+bool EInkParallelDisplay::forceDisplay(uint32_t msecLimit)
+{
+    uint32_t now = millis();
+    if (lastDrawMsec == 0 || (now - lastDrawMsec) > msecLimit) {
+        display();
+        return true;
+    }
+    return false;
+}
+
+void EInkParallelDisplay::endUpdate()
+{
+    {
+        // ensure any async full update is started/completed
+        if (asyncFullRunning.load()) {
+            // nothing to do; background task will run and call backupPlane when done
+        } else {
+            epaper->fullUpdate(CLEAR_FAST, false);
+            epaper->backupPlane();
+#ifdef EINK_LIMIT_GHOSTING_PX
+            resetGhostPixelTracking();
+#endif
+        }
+    }
+}
+
+#endif
@@ -0,0 +1,69 @@
+#pragma once
+
+#include "configuration.h"
+
+#ifdef USE_EINK_PARALLELDISPLAY
+#include <OLEDDisplay.h>
+
+#include <atomic>
+#include <freertos/FreeRTOS.h>
+#include <freertos/task.h>
+
+class FASTEPD;
+
+/**
+ * Adapter for E-Ink 8-bit parallel displays (EPD), specifically devices supported by FastEPD library
+ */
+class EInkParallelDisplay : public OLEDDisplay
+{
+  public:
+    enum EpdRotation {
+        EPD_ROT_LANDSCAPE = 0,
+        EPD_ROT_PORTRAIT = 90,
+        EPD_ROT_INVERTED_LANDSCAPE = 180,
+        EPD_ROT_INVERTED_PORTRAIT = 270,
+    };
+
+    EInkParallelDisplay(uint16_t width, uint16_t height, EpdRotation rotation);
+    virtual ~EInkParallelDisplay();
+
+    // OLEDDisplay virtuals
+    bool connect() override;
+    void sendCommand(uint8_t com) override;
+    int getBufferOffset(void) override { return 0; }
+
+    void display(void) override;
+    bool forceDisplay(uint32_t msecLimit = 1000);
+    void endUpdate();
+
+  protected:
+    uint32_t lastDrawMsec = 0;
+    FASTEPD *epaper;
+
+  private:
+    // Async full-refresh support
+    std::atomic<bool> asyncFullRunning{false};
+    TaskHandle_t asyncTaskHandle = nullptr;
+    void startAsyncFullUpdate(int clearMode);
+    static void asyncFullUpdateTask(void *pvParameters);
+
+#ifdef EINK_LIMIT_GHOSTING_PX
+    // helpers
+    void resetGhostPixelTracking();
+    void markDirtyBits(const uint8_t *prevBuf, uint32_t pos, uint8_t mask, uint8_t out);
+    void countGhostPixelsAndMaybePromote(int &newTop, int &newBottom, bool &forceFull);
+
+    // per-bit dirty buffer (same format as epaper buffers): one bit == one pixel
+    uint8_t *dirtyPixels = nullptr;
+    size_t dirtyPixelsSize = 0;
+    uint32_t ghostPixelCount = 0;
+    uint32_t ghostPixelLimit = EINK_LIMIT_GHOSTING_PX;
+#endif
+
+    EpdRotation rotation;
+    uint32_t previousImageHash = 0;
+    uint32_t lastUpdateMs = 0;
+    int fastRefreshCount = 0;
+};
+
+#endif
@@ -27,6 +27,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "configuration.h"
 #include "meshUtils.h"
 #if HAS_SCREEN
+#include "EInkParallelDisplay.h"
 #include <OLEDDisplay.h>

 #include "DisplayFormatters.h"
@@ -364,12 +365,14 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) || defined(HACKADAY_COMMUNICATOR)
    dispdev = new TFTDisplay(address.address, -1, -1, geometry,
                             (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
-#elif defined(USE_EINK) && !defined(USE_EINK_DYNAMICDISPLAY)
+#elif defined(USE_EINK) && !defined(USE_EINK_DYNAMICDISPLAY) && !defined(USE_EINK_PARALLELDISPLAY)
    dispdev = new EInkDisplay(address.address, -1, -1, geometry,
                              (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
 #elif defined(USE_EINK) && defined(USE_EINK_DYNAMICDISPLAY)
    dispdev = new EInkDynamicDisplay(address.address, -1, -1, geometry,
                                     (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
+#elif defined(USE_EINK_PARALLELDISPLAY)
+    dispdev = new EInkParallelDisplay(EPD_WIDTH, EPD_HEIGHT, EInkParallelDisplay::EPD_ROT_PORTRAIT);
 #elif defined(USE_ST7567)
    dispdev = new ST7567Wire(address.address, -1, -1, geometry,
                             (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
@@ -759,7 +762,11 @@ void Screen::forceDisplay(bool forceUiUpdate)
    }

    // Tell EInk class to update the display
+#if defined(USE_EINK_PARALLELDISPLAY)
+    static_cast<EInkParallelDisplay *>(dispdev)->forceDisplay();
+#elif defined(USE_EINK)
    static_cast<EInkDisplay *>(dispdev)->forceDisplay();
+#endif
 #else
    // No delay between UI frame rendering
    if (forceUiUpdate) {
@@ -998,8 +1005,10 @@ void Screen::setScreensaverFrames(FrameCallback einkScreensaver)
        ui->update();
    } while (ui->getUiState()->lastUpdate < startUpdate);

+#if defined(USE_EINK_PARALLELDISPLAY)
+    static_cast<EInkParallelDisplay *>(dispdev)->forceDisplay(0);
+#elif defined(USE_EINK) && !defined(USE_EINK_DYNAMICDISPLAY)
    // Old EInkDisplay class
-#if !defined(USE_EINK_DYNAMICDISPLAY)
    static_cast<EInkDisplay *>(dispdev)->forceDisplay(0); // Screen::forceDisplay(), but override rate-limit
 #endif

@@ -1011,7 +1020,7 @@ void Screen::setScreensaverFrames(FrameCallback einkScreensaver)
 #ifdef EINK_HASQUIRK_GHOSTING
    EINK_ADD_FRAMEFLAG(dispdev, COSMETIC); // Really ugly to see ghosting from "screen paused"
 #else
-    EINK_ADD_FRAMEFLAG(dispdev, RESPONSIVE); // Really nice to wake screen with a fast-refresh
+    EINK_ADD_FRAMEFLAG(dispdev, RESPONSIVE);              // Really nice to wake screen with a fast-refresh
 #endif
 }
 #endif
@@ -20,7 +20,7 @@
 #include "graphics/fonts/OLEDDisplayFontsGR.h"
 #endif

-#if defined(CROWPANEL_ESP32S3_5_EPAPER) && defined(USE_EINK)
+#if (defined(CROWPANEL_ESP32S3_5_EPAPER) || defined(T5_S3_EPAPER_PRO)) && defined(USE_EINK)
 #include "graphics/fonts/EinkDisplayFonts.h"
 #endif

@@ -90,7 +90,7 @@

 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
     defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) ||             \
-     defined(HACKADAY_COMMUNICATOR) || defined(USE_ST7796)) &&                                                                   \
+     defined(USE_ST7796) || defined(HACKADAY_COMMUNICATOR)) &&                                                                   \
    !defined(DISPLAY_FORCE_SMALL_FONTS)
 // The screen is bigger so use bigger fonts
 #define FONT_SMALL FONT_MEDIUM_LOCAL // Height: 19
@@ -106,7 +106,7 @@
 #define FONT_LARGE FONT_LARGE_LOCAL   // Height: 28
 #endif

-#if defined(CROWPANEL_ESP32S3_5_EPAPER) && defined(USE_EINK)
+#if defined(CROWPANEL_ESP32S3_5_EPAPER) || defined(T5_S3_EPAPER_PRO)
 #undef FONT_SMALL
 #undef FONT_MEDIUM
 #undef FONT_LARGE
@@ -1348,7 +1348,7 @@ void TFTDisplay::sendCommand(uint8_t com)
            digitalWrite(portduino_config.displayBacklight.pin, TFT_BACKLIGHT_ON);
 #elif defined(HACKADAY_COMMUNICATOR)
        tft->displayOn();
-#elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE)
+#elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE) && !defined(HELTEC_MESH_NODE_T096)
        tft->wakeup();
        tft->powerSaveOff();
 #endif
@@ -1359,7 +1359,7 @@ void TFTDisplay::sendCommand(uint8_t com)
 #ifdef UNPHONE
        unphone.backlight(true); // using unPhone library
 #endif
-#ifdef RAK14014
+#if defined(RAK14014) || defined(HELTEC_MESH_NODE_T096)
 #elif !defined(M5STACK) && !defined(ST7789_CS) &&                                                                                \
    !defined(HACKADAY_COMMUNICATOR) // T-Deck gets brightness set in Screen.cpp in the handleSetOn function
        tft->setBrightness(172);
@@ -1375,7 +1375,7 @@ void TFTDisplay::sendCommand(uint8_t com)
            digitalWrite(portduino_config.displayBacklight.pin, !TFT_BACKLIGHT_ON);
 #elif defined(HACKADAY_COMMUNICATOR)
        tft->displayOff();
-#elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE)
+#elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE) && !defined(HELTEC_MESH_NODE_T096)
        tft->sleep();
        tft->powerSaveOn();
 #endif
@@ -1386,7 +1386,7 @@ void TFTDisplay::sendCommand(uint8_t com)
 #ifdef UNPHONE
        unphone.backlight(false); // using unPhone library
 #endif
-#ifdef RAK14014
+#if defined(RAK14014) || defined(HELTEC_MESH_NODE_T096)
 #elif !defined(M5STACK) && !defined(HACKADAY_COMMUNICATOR)
        tft->setBrightness(0);
 #endif
@@ -1401,7 +1401,7 @@ void TFTDisplay::sendCommand(uint8_t com)

 void TFTDisplay::setDisplayBrightness(uint8_t _brightness)
 {
-#ifdef RAK14014
+#if defined(RAK14014) || defined(HELTEC_MESH_NODE_T096)
    // todo
 #elif !defined(HACKADAY_COMMUNICATOR)
    tft->setBrightness(_brightness);
@@ -1421,7 +1421,7 @@ bool TFTDisplay::hasTouch(void)
 {
 #ifdef RAK14014
    return true;
-#elif !defined(M5STACK) && !defined(HACKADAY_COMMUNICATOR)
+#elif !defined(M5STACK) && !defined(HACKADAY_COMMUNICATOR) && !defined(HELTEC_MESH_NODE_T096)
    return tft->touch() != nullptr;
 #else
    return false;
@@ -1440,7 +1440,7 @@ bool TFTDisplay::getTouch(int16_t *x, int16_t *y)
    } else {
        return false;
    }
-#elif !defined(M5STACK) && !defined(HACKADAY_COMMUNICATOR)
+#elif !defined(M5STACK) && !defined(HACKADAY_COMMUNICATOR) && !defined(HELTEC_MESH_NODE_T096)
    return tft->getTouch(x, y);
 #else
    return false;
@@ -1457,7 +1457,7 @@ bool TFTDisplay::connect()
 {
    concurrency::LockGuard g(spiLock);
    LOG_INFO("Do TFT init");
-#ifdef RAK14014
+#if defined(RAK14014) || defined(HELTEC_MESH_NODE_T096)
    tft = new TFT_eSPI;
 #elif defined(HACKADAY_COMMUNICATOR)
    bus = new Arduino_ESP32SPI(TFT_DC, TFT_CS, 38 /* SCK */, 21 /* MOSI */, GFX_NOT_DEFINED /* MISO */, HSPI /* spi_num */);
@@ -1494,7 +1494,7 @@ bool TFTDisplay::connect()
    ft6336u.begin();
    pinMode(SCREEN_TOUCH_INT, INPUT_PULLUP);
    attachInterrupt(digitalPinToInterrupt(SCREEN_TOUCH_INT), rak14014_tpIntHandle, FALLING);
-#elif defined(T_DECK) || defined(PICOMPUTER_S3) || defined(CHATTER_2)
+#elif defined(T_DECK) || defined(PICOMPUTER_S3) || defined(CHATTER_2) || defined(HELTEC_MESH_NODE_T096)
    tft->setRotation(1); // T-Deck has the TFT in landscape
 #elif defined(T_WATCH_S3)
    tft->setRotation(2); // T-Watch S3 left-handed orientation
@@ -535,6 +535,9 @@ void drawSystemScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x
 #ifndef T_DECK_PRO
    barsOffset -= 12;
 #endif
+#if defined(T5_S3_EPAPER_PRO)
+    barsOffset += 60;
+#endif
 #endif
    int barX = x + barsOffset;
    if (currentResolution == ScreenResolution::UltraLow) {
@@ -584,11 +587,12 @@ void drawSystemScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x
    uint32_t heapUsed = memGet.getHeapSize() - memGet.getFreeHeap();
    uint32_t heapTotal = memGet.getHeapSize();

-    uint32_t psramUsed = memGet.getPsramSize() - memGet.getFreePsram();
-    uint32_t psramTotal = memGet.getPsramSize();
-
    uint32_t flashUsed = 0, flashTotal = 0;
 #ifdef ESP32
+#ifndef T5_S3_EPAPER_PRO
+    uint32_t psramUsed = memGet.getPsramSize() - memGet.getFreePsram();
+    uint32_t psramTotal = memGet.getPsramSize();
+#endif
    flashUsed = FSCom.usedBytes();
    flashTotal = FSCom.totalBytes();
 #endif
@@ -607,10 +611,12 @@ void drawSystemScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x
    // === Draw memory rows
    drawUsageRow("Heap:", heapUsed, heapTotal, true);
 #ifdef ESP32
+#ifndef T5_S3_EPAPER_PRO
    if (psramUsed > 0) {
        line += 1;
        drawUsageRow("PSRAM:", psramUsed, psramTotal);
    }
+#endif
    if (flashTotal > 0) {
        line += 1;
        drawUsageRow("Flash:", flashUsed, flashTotal);
@@ -1222,9 +1222,11 @@ void menuHandler::positionBaseMenu()
    };

    constexpr size_t baseCount = sizeof(baseOptions) / sizeof(baseOptions[0]);
-    constexpr size_t calibrateCount = sizeof(calibrateOptions) / sizeof(calibrateOptions[0]);
    static std::array<const char *, baseCount> baseLabels{};
+#if !MESHTASTIC_EXCLUDE_ACCELEROMETER
+    constexpr size_t calibrateCount = sizeof(calibrateOptions) / sizeof(calibrateOptions[0]);
    static std::array<const char *, calibrateCount> calibrateLabels{};
+#endif

    auto onSelection = [](const PositionMenuOption &option, int) -> void {
        if (option.action == OptionsAction::Back) {
@@ -1250,9 +1252,11 @@ void menuHandler::positionBaseMenu()
            screen->runNow();
            break;
        case PositionAction::CompassCalibrate:
+#if !MESHTASTIC_EXCLUDE_ACCELEROMETER
            if (accelerometerThread) {
                accelerometerThread->calibrate(30);
            }
+#endif
            break;
        case PositionAction::GPSSmartPosition:
            menuQueue = GpsSmartPositionMenu;
@@ -1270,11 +1274,15 @@ void menuHandler::positionBaseMenu()
    };

    BannerOverlayOptions bannerOptions;
+#if !MESHTASTIC_EXCLUDE_ACCELEROMETER
    if (accelerometerThread) {
        bannerOptions = createStaticBannerOptions("GPS Action", calibrateOptions, calibrateLabels, onSelection);
    } else {
        bannerOptions = createStaticBannerOptions("GPS Action", baseOptions, baseLabels, onSelection);
    }
+#else
+    bannerOptions = createStaticBannerOptions("GPS Action", baseOptions, baseLabels, onSelection);
+#endif

    screen->showOverlayBanner(bannerOptions);
 }
@@ -2204,9 +2212,9 @@ void menuHandler::traceRouteMenu()
 void menuHandler::testMenu()
 {

-    enum optionsNumbers { Back, NumberPicker, ShowChirpy };
-    static const char *optionsArray[4] = {"Back"};
-    static int optionsEnumArray[4] = {Back};
+    enum optionsNumbers { Back, NumberPicker, ShowChirpy, TestAnnounce };
+    static const char *optionsArray[5] = {"Back"};
+    static int optionsEnumArray[5] = {Back};
    int options = 1;

    optionsArray[options] = "Number Picker";
@@ -2214,6 +2222,10 @@ void menuHandler::testMenu()

    optionsArray[options] = screen->isFrameHidden("chirpy") ? "Show Chirpy" : "Hide Chirpy";
    optionsEnumArray[options++] = ShowChirpy;
+#ifdef HAS_I2S
+    optionsArray[options] = "Test Announce";
+    optionsEnumArray[options++] = TestAnnounce;
+#endif

    BannerOverlayOptions bannerOptions;
    bannerOptions.message = "Hidden Test Menu";
@@ -2228,6 +2240,10 @@ void menuHandler::testMenu()
            screen->toggleFrameVisibility("chirpy");
            screen->setFrames(Screen::FOCUS_SYSTEM);

+        } else if (selected == TestAnnounce) {
+#ifdef HAS_I2S
+            audioThread->readAloud("This is a test of the emergency broadcast system. This is only a test.");
+#endif
        } else {
            menuQueue = SystemBaseMenu;
            screen->runNow();
@@ -10,7 +10,7 @@ const uint8_t ArialMT_Plain_10_RU[] PROGMEM = {
    0xE0, // Number of chars: 224

    // Jump Table:
-    0xFF, 0xFF, 0x00, 0x0A, // 32
+    0xFF, 0xFF, 0x00, 0x03, // 32
    0x00, 0x00, 0x04, 0x03, // 33
    0x00, 0x04, 0x05, 0x04, // 34
    0x00, 0x09, 0x09, 0x06, // 35
@@ -1766,4 +1766,4 @@ const uint8_t ArialMT_Plain_24_RU[] PROGMEM = {
    0x3F, // 255
 };

-#endif // OLED_RU
+#endif // OLED_RU
@@ -9,7 +9,7 @@ const uint8_t ArialMT_Plain_10_UA[] PROGMEM = {
    0x20, // First char: 32
    0xE0, // Number of chars: 224
    // Jump Table:
-    0xFF, 0xFF, 0x00, 0x0A, // 32
+    0xFF, 0xFF, 0x00, 0x03, // 32
    0x00, 0x00, 0x04, 0x03, // 33
    0x00, 0x04, 0x05, 0x04, // 34
    0x00, 0x09, 0x09, 0x06, // 35
@@ -1924,4 +1924,4 @@ const uint8_t ArialMT_Plain_24_UA[] PROGMEM = {
    0xFF, // 1103
 };

-#endif // OLED_UA
+#endif // OLED_UA
@@ -15,6 +15,7 @@

 #include <GFX.h> // GFXRoot drawing lib

+#include "mesh/MeshModule.h"
 #include "mesh/MeshTypes.h"

 #include "./AppletFont.h"
@@ -16,6 +16,10 @@

 DeviceScreen *deviceScreen = nullptr;

+#ifndef TFT_TASK_STACK_SIZE
+#define TFT_TASK_STACK_SIZE 16384
+#endif
+
 #ifdef ARCH_ESP32
 // Get notified when the system is entering light sleep
 CallbackObserver<DeviceScreen, void *> tftSleepObserver =
@@ -127,7 +131,7 @@ void tftSetup(void)
 #ifdef ARCH_ESP32
        tftSleepObserver.observe(&notifyLightSleep);
        endSleepObserver.observe(&notifyLightSleepEnd);
-        xTaskCreatePinnedToCore(tft_task_handler, "tft", 10240, NULL, 1, NULL, 0);
+        xTaskCreatePinnedToCore(tft_task_handler, "tft", TFT_TASK_STACK_SIZE, NULL, 1, NULL, 0);
 #elif defined(ARCH_PORTDUINO)
        std::thread *tft_task = new std::thread([] { tft_task_handler(); });
 #endif
@@ -34,7 +34,7 @@

 #if defined(BUTTON_PIN_TOUCH)
 ButtonThread *TouchButtonThread = nullptr;
-#if defined(TTGO_T_ECHO_PLUS) && defined(PIN_EINK_EN)
+#if defined(PIN_EINK_EN)
 static bool touchBacklightWasOn = false;
 static bool touchBacklightActive = false;
 #endif
@@ -220,8 +220,8 @@ void InputBroker::Init()
    };
    touchConfig.singlePress = INPUT_BROKER_NONE;
    touchConfig.longPress = INPUT_BROKER_BACK;
-#if defined(TTGO_T_ECHO_PLUS) && defined(PIN_EINK_EN)
-    // On T-Echo Plus the touch pad should only drive the backlight, not UI navigation/sounds
+#if defined(PIN_EINK_EN)
+    // Touch pad drives the backlight on devices with e-ink backlight pin
    touchConfig.longPress = INPUT_BROKER_NONE;
    touchConfig.suppressLeadUpSound = true;
    touchConfig.onPress = []() {
@@ -299,6 +299,7 @@ void InputBroker::Init()
    // Buttons. Moved here cause we need NodeDB to be initialized
    // If your variant.h has a BUTTON_PIN defined, go ahead and define BUTTON_ACTIVE_LOW and BUTTON_ACTIVE_PULLUP
    UserButtonThread = new ButtonThread("UserButton");
+#if !MESHTASTIC_EXCLUDE_SCREEN
    if (screen) {
        ButtonConfig userConfig;
        userConfig.pinNumber = (uint8_t)_pinNum;
@@ -317,7 +318,9 @@ void InputBroker::Init()
        userConfig.longPressTime = 500;
        userConfig.longLongPress = INPUT_BROKER_SHUTDOWN;
        UserButtonThread->initButton(userConfig);
-    } else {
+    } else
+#endif
+    {
        ButtonConfig userConfigNoScreen;
        userConfigNoScreen.pinNumber = (uint8_t)_pinNum;
        userConfigNoScreen.activeLow = BUTTON_ACTIVE_LOW;
@@ -123,7 +123,7 @@ void printPartitionTable()
 #include "AmbientLightingThread.h"
 #include "PowerFSMThread.h"

-#if !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_I2C
+#if !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_I2C && !MESHTASTIC_EXCLUDE_ACCELEROMETER
 #include "motion/AccelerometerThread.h"
 AccelerometerThread *accelerometerThread = nullptr;
 #endif
@@ -657,7 +657,7 @@ void setup()
    }
 #endif

-#if !defined(ARCH_STM32WL)
+#if !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_ACCELEROMETER
    auto acc_info = i2cScanner->firstAccelerometer();
    accelerometer_found = acc_info.type != ScanI2C::DeviceType::NONE ? acc_info.address : accelerometer_found;
    LOG_DEBUG("acc_info = %i", acc_info.type);
@@ -737,7 +737,7 @@ void setup()
 #endif

 #if !MESHTASTIC_EXCLUDE_I2C
-#if !defined(ARCH_STM32WL)
+#if !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_ACCELEROMETER
    if (acc_info.type != ScanI2C::DeviceType::NONE) {
        accelerometerThread = new AccelerometerThread(acc_info.type);
    }
@@ -65,7 +65,7 @@ extern UdpMulticastHandler *udpHandler;
 // Global Screen singleton.
 extern graphics::Screen *screen;

-#if !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_I2C
+#if !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_I2C && !MESHTASTIC_EXCLUDE_ACCELEROMETER
 #include "motion/AccelerometerThread.h"
 extern AccelerometerThread *accelerometerThread;
 #endif
@@ -91,10 +91,27 @@ void FloodingRouter::reprocessPacket(const meshtastic_MeshPacket *p)
 {
    if (nodeDB)
        nodeDB->updateFrom(*p);
+
 #if !MESHTASTIC_EXCLUDE_TRACEROUTE
+    if (traceRouteModule && p->which_payload_variant != meshtastic_MeshPacket_decoded_tag) {
+        // If we got a packet that is not decoded, try to decode it so we can check for traceroute.
+        auto decodedState = perhapsDecode(const_cast<meshtastic_MeshPacket *>(p));
+        if (decodedState == DecodeState::DECODE_SUCCESS) {
+            // parsing was successful, print for debugging
+            printPacket("reprocessPacket(DUP)", p);
+        } else {
+            // Fatal decoding error, we can't do anything with this packet
+            LOG_WARN(
+                "FloodingRouter::reprocessPacket: Fatal decode error (state=%d, id=0x%08x, from=%u), can't check for traceroute",
+                static_cast<int>(decodedState), p->id, getFrom(p));
+            return;
+        }
+    }
+
    if (traceRouteModule && p->which_payload_variant == meshtastic_MeshPacket_decoded_tag &&
-        p->decoded.portnum == meshtastic_PortNum_TRACEROUTE_APP)
+        p->decoded.portnum == meshtastic_PortNum_TRACEROUTE_APP) {
        traceRouteModule->processUpgradedPacket(*p);
+    }
 #endif
 }

@@ -173,14 +173,16 @@ void LoRaFEMInterface::setRxModeEnableWhenMCUSleep(void)
 #endif
 #elif defined(USE_KCT8103L_PA)
    digitalWrite(LORA_KCT8103L_PA_CSD, HIGH);
-    rtc_gpio_hold_en((gpio_num_t)LORA_KCT8103L_PA_CSD);
    if (lna_enabled) {
        digitalWrite(LORA_KCT8103L_PA_CTX, LOW);
    } else {
        digitalWrite(LORA_KCT8103L_PA_CTX, HIGH);
    }
+#if defined(ARCH_ESP32)
+    rtc_gpio_hold_en((gpio_num_t)LORA_KCT8103L_PA_CSD);
    rtc_gpio_hold_en((gpio_num_t)LORA_KCT8103L_PA_CTX);
 #endif
+#endif
 }

 void LoRaFEMInterface::setLNAEnable(bool enabled)
@@ -819,7 +819,7 @@ void NodeDB::installDefaultModuleConfig()
    moduleConfig.has_store_forward = true;
    moduleConfig.has_telemetry = true;
    moduleConfig.has_external_notification = true;
-#if defined(PIN_BUZZER) || defined(PIN_VIBRATION) || defined(LED_NOTIFICATION)
+#if defined(PIN_BUZZER) || defined(PIN_VIBRATION) || defined(LED_NOTIFICATION) || defined(PCA_LED_NOTIFICATION)
    moduleConfig.external_notification.enabled = true;
 #endif
 #if defined(PIN_BUZZER)
@@ -130,8 +130,10 @@ const RegionInfo regions[] = {

    /*
       https://lora-alliance.org/wp-content/uploads/2020/11/lorawan_regional_parameters_v1.0.3reva_0.pdf
+       https://standard.nbtc.go.th/getattachment/Standards/%E0%B8%A1%E0%B8%B2%E0%B8%95%E0%B8%A3%E0%B8%90%E0%B8%B2%E0%B8%99%E0%B8%97%E0%B8%B2%E0%B8%87%E0%B9%80%E0%B8%97%E0%B8%84%E0%B8%99%E0%B8%B4%E0%B8%84%E0%B8%82%E0%B8%AD%E0%B8%87%E0%B9%80%E0%B8%84%E0%B8%A3%E0%B8%B7%E0%B9%88%E0%B8%AD%E0%B8%87%E0%B9%82%E0%B8%97%E0%B8%A3%E0%B8%84%E0%B8%A1%E0%B8%99%E0%B8%B2%E0%B8%84%E0%B8%A1/1033-2565.pdf.aspx?lang=th-TH
+       Thailand 920–925 MHz set max TX power to 27 dBm and enforce 10% duty cycle, aligned with NBTC regulations.
    */
-    RDEF(TH, 920.0f, 925.0f, 100, 0, 16, true, false, false),
+    RDEF(TH, 920.0f, 925.0f, 10, 0, 27, true, false, false),

    /*
        433,05-434,7 Mhz 10 mW
@@ -31,5 +31,6 @@ bool Throttle::execute(uint32_t *lastExecutionMs, uint32_t minumumIntervalMs, vo
 /// @param timeSpanMs The interval in milliseconds of the timespan
 bool Throttle::isWithinTimespanMs(uint32_t lastExecutionMs, uint32_t timeSpanMs)
 {
-    return (millis() - lastExecutionMs) < timeSpanMs;
+    uint32_t now = millis();
+    return (now - lastExecutionMs) < timeSpanMs;
 }
@@ -16,6 +16,20 @@ TransmitHistory *TransmitHistory::getInstance()
    return transmitHistory;
 }

+TransmitHistory::StoredTimestamp TransmitHistory::makeStoredTimestamp(uint32_t seconds, uint8_t flags)
+{
+    StoredTimestamp stored;
+    stored.seconds = seconds;
+    stored.flags = flags;
+    return stored;
+}
+
+TransmitHistory::StoredTimestamp TransmitHistory::decodeLegacyTimestamp(uint32_t seconds)
+{
+    const bool isProbablyBootRelative = seconds > 0 && seconds <= LEGACY_BOOT_RELATIVE_MAX_SEC;
+    return makeStoredTimestamp(seconds, isProbablyBootRelative ? ENTRY_FLAG_BOOT_RELATIVE : ENTRY_FLAG_NONE);
+}
+
 void TransmitHistory::loadFromDisk()
 {
    spiLock->lock();
@@ -23,16 +37,33 @@ void TransmitHistory::loadFromDisk()
    if (file) {
        FileHeader header{};
        if (file.read((uint8_t *)&header, sizeof(header)) == sizeof(header) && header.magic == MAGIC &&
-            header.version == VERSION && header.count <= MAX_ENTRIES) {
+            (header.version == 1 || header.version == VERSION) && header.count <= MAX_ENTRIES) {
            for (uint8_t i = 0; i < header.count; i++) {
-                Entry entry{};
-                if (file.read((uint8_t *)&entry, sizeof(entry)) == sizeof(entry)) {
-                    if (entry.epochSeconds > 0) {
-                        history[entry.key] = entry.epochSeconds;
-                        // Seed in-memory millis so throttle works even without RTC/GPS.
-                        // Treating stored entries as "just sent" is safe — worst case the
-                        // node waits one full interval before its first broadcast.
-                        lastMillis[entry.key] = millis();
+                if (header.version == 1) {
+                    LegacyEntry entry{};
+                    if (file.read((uint8_t *)&entry, sizeof(entry)) == sizeof(entry) && entry.epochSeconds > 0) {
+                        history[entry.key] = decodeLegacyTimestamp(entry.epochSeconds);
+                    }
+                } else {
+                    Entry entry{};
+                    if (file.read((uint8_t *)&entry, sizeof(entry)) == sizeof(entry) && entry.epochSeconds > 0) {
+                        history[entry.key] = makeStoredTimestamp(entry.epochSeconds, entry.flags);
+                        // Do NOT seed lastMillis here.
+                        //
+                        // getLastSentToMeshMillis() reconstructs a millis()-relative value
+                        // from the stored epoch, and Throttle::isWithinTimespanMs() uses
+                        // the same unsigned subtraction pattern. Once getTime() has a valid
+                        // wall-clock epoch comparable to stored values, recent reboots still
+                        // throttle correctly while long power-off periods no longer look like
+                        // "just sent" and incorrectly suppress the first send.
+                        //
+                        // Before RTC/NTP/GPS time is valid, persisted absolute epochs do not
+                        // contribute, but boot-relative entries still suppress near-term reboot
+                        // chatter via a narrow recovery window.
+                        //
+                        // If we seeded lastMillis to millis() here, every loaded entry would
+                        // appear to have been sent at boot time, regardless of the true age
+                        // of the last transmission. That was the regression behind #9901.
                    }
                }
            }
@@ -53,7 +84,8 @@ void TransmitHistory::setLastSentToMesh(uint16_t key)
    lastMillis[key] = millis();
    uint32_t now = getTime();
    if (now >= 2) {
-        history[key] = now;
+        const uint8_t flags = (getRTCQuality() == RTCQualityNone) ? ENTRY_FLAG_BOOT_RELATIVE : ENTRY_FLAG_NONE;
+        history[key] = makeStoredTimestamp(now, flags);
        dirty = true;
        // Don't flush to disk on every transmit — flash has limited write endurance.
        // The in-memory lastMillis map handles throttle during normal operation.
@@ -68,15 +100,84 @@ void TransmitHistory::setLastSentToMesh(uint16_t key)
    }
 }

+#ifdef PIO_UNIT_TESTING
+void TransmitHistory::setLastSentAtEpoch(uint16_t key, uint32_t epochSeconds)
+{
+    if (epochSeconds > 0) {
+        history[key] = makeStoredTimestamp(epochSeconds, ENTRY_FLAG_NONE);
+        dirty = true;
+    } else {
+        history.erase(key);
+        lastMillis.erase(key);
+    }
+}
+
+void TransmitHistory::setLastSentAtBootRelative(uint16_t key, uint32_t secondsSinceBoot)
+{
+    if (secondsSinceBoot > 0) {
+        history[key] = makeStoredTimestamp(secondsSinceBoot, ENTRY_FLAG_BOOT_RELATIVE);
+        dirty = true;
+    } else {
+        history.erase(key);
+        lastMillis.erase(key);
+    }
+}
+#endif
+
 uint32_t TransmitHistory::getLastSentToMeshEpoch(uint16_t key) const
 {
    auto it = history.find(key);
    if (it != history.end()) {
-        return it->second;
+        return it->second.seconds;
    }
    return 0;
 }

+uint32_t TransmitHistory::getLastSentAbsoluteMillis(uint32_t storedEpoch) const
+{
+    uint32_t now = getTime();
+    if (now < 2) {
+        return 0;
+    }
+
+    if (storedEpoch > now) {
+        return 0;
+    }
+
+    uint32_t secondsAgo = now - storedEpoch;
+    uint32_t msAgo = secondsAgo * 1000;
+
+    if (secondsAgo > 86400 || msAgo / 1000 != secondsAgo) {
+        return 0;
+    }
+
+    return millis() - msAgo;
+}
+
+uint32_t TransmitHistory::getLastSentBootRelativeMillis(uint32_t storedSeconds) const
+{
+    if (getRTCQuality() != RTCQualityNone) {
+        return 0;
+    }
+
+    uint32_t now = getTime();
+
+    if (storedSeconds <= now) {
+        uint32_t secondsAgo = now - storedSeconds;
+        if (secondsAgo > BOOT_RELATIVE_RECOVERY_WINDOW_SEC) {
+            return 0;
+        }
+        return millis() - (secondsAgo * 1000);
+    }
+
+    uint32_t secondsAhead = storedSeconds - now;
+    if (secondsAhead > BOOT_RELATIVE_RECOVERY_WINDOW_SEC) {
+        return 0;
+    }
+
+    return millis();
+}
+
 uint32_t TransmitHistory::getLastSentToMeshMillis(uint16_t key) const
 {
    // Prefer runtime millis value (accurate within this boot)
@@ -86,34 +187,23 @@ uint32_t TransmitHistory::getLastSentToMeshMillis(uint16_t key) const
    }

    // Fall back to epoch conversion (loaded from disk after reboot)
-    uint32_t storedEpoch = getLastSentToMeshEpoch(key);
-    if (storedEpoch == 0) {
+    auto it = history.find(key);
+    if (it == history.end() || it->second.seconds == 0) {
        return 0; // No stored time — module has never sent
    }

-    uint32_t now = getTime();
-    if (now < 2) {
-        // No valid RTC time yet — can't convert to millis. Return 0 so throttle doesn't block.
-        return 0;
+    // Convert to a millis()-relative timestamp: millis() - msAgo.
+    //
+    // The result may wrap if msAgo is larger than the current uptime, and that is
+    // intentional. Throttle::isWithinTimespanMs() also uses unsigned subtraction,
+    // so the reconstructed age is preserved across wraparound:
+    // - recent reboot, 5 min ago   -> (millis() - lastMs) == 300000, still throttled
+    // - long reboot, 30 min ago    -> (millis() - lastMs) == 1800000, allowed
+    if ((it->second.flags & ENTRY_FLAG_BOOT_RELATIVE) != 0) {
+        return getLastSentBootRelativeMillis(it->second.seconds);
    }

-    if (storedEpoch > now) {
-        // Stored time is in the future (clock went backwards?) — treat as stale
-        return 0;
-    }
-
-    uint32_t secondsAgo = now - storedEpoch;
-    uint32_t msAgo = secondsAgo * 1000;
-
-    // Guard against overflow: if the transmit was very long ago, just return 0 (won't throttle)
-    if (secondsAgo > 86400 || msAgo / 1000 != secondsAgo) {
-        return 0;
-    }
-
-    // Convert to a millis()-relative timestamp: millis() - msAgo
-    // This gives a value that, when passed to Throttle::isWithinTimespanMs(value, interval),
-    // correctly reports whether the transmit was within interval ms.
-    return millis() - msAgo;
+    return getLastSentAbsoluteMillis(it->second.seconds);
 }

 bool TransmitHistory::saveToDisk()
@@ -141,12 +231,13 @@ bool TransmitHistory::saveToDisk()
        file.write((uint8_t *)&header, sizeof(header));

        uint8_t written = 0;
-        for (const auto &[key, epochSeconds] : history) {
+        for (const auto &[key, stored] : history) {
            if (written >= MAX_ENTRIES)
                break;
            Entry entry{};
            entry.key = key;
-            entry.epochSeconds = epochSeconds;
+            entry.epochSeconds = stored.seconds;
+            entry.flags = stored.flags;
            file.write((uint8_t *)&entry, sizeof(entry));
            written++;
        }
@@ -35,8 +35,25 @@ class TransmitHistory
     */
    void setLastSentToMesh(uint16_t key);

+#ifdef PIO_UNIT_TESTING
    /**
-     * Get the last transmit epoch seconds for a given key, or 0 if unknown.
+     * Directly set the stored epoch for a key without touching the runtime lastMillis map.
+     * Intended for testing purposes: lets tests simulate "the last broadcast happened N
+     * seconds ago" without needing to fake the system clock.
+     */
+    void setLastSentAtEpoch(uint16_t key, uint32_t epochSeconds);
+
+    /**
+     * Directly set a boot-relative timestamp (seconds since boot) for testing.
+     */
+    void setLastSentAtBootRelative(uint16_t key, uint32_t secondsSinceBoot);
+#endif
+
+    /**
+     * Get the raw persisted timestamp seconds for a given key, or 0 if unknown.
+     *
+     * The returned value is an absolute epoch when persisted with valid RTC/NTP/GPS time,
+     * or boot-relative seconds when ENTRY_FLAG_BOOT_RELATIVE is set.
     */
    uint32_t getLastSentToMeshEpoch(uint16_t key) const;

@@ -64,13 +81,31 @@ class TransmitHistory

    static constexpr const char *FILENAME = "/prefs/transmit_history.dat";
    static constexpr uint32_t MAGIC = 0x54485354; // "THST"
-    static constexpr uint8_t VERSION = 1;
+    static constexpr uint8_t VERSION = 2;
    static constexpr uint8_t MAX_ENTRIES = 16;
    static constexpr uint32_t SAVE_INTERVAL_MS = 5 * 60 * 1000; // 5 minutes
+    static constexpr uint32_t BOOT_RELATIVE_RECOVERY_WINDOW_SEC = 2 * 60;
+    static constexpr uint32_t LEGACY_BOOT_RELATIVE_MAX_SEC = 365UL * 24 * 60 * 60;
+
+    enum EntryFlags : uint8_t {
+        ENTRY_FLAG_NONE = 0,
+        ENTRY_FLAG_BOOT_RELATIVE = 0x01,
+    };
+
+    struct StoredTimestamp {
+        uint32_t seconds = 0;
+        uint8_t flags = ENTRY_FLAG_NONE;
+    };

    struct __attribute__((packed)) Entry {
        uint16_t key;
        uint32_t epochSeconds;
+        uint8_t flags;
+    };
+
+    struct __attribute__((packed)) LegacyEntry {
+        uint16_t key;
+        uint32_t epochSeconds;
    };

    struct __attribute__((packed)) FileHeader {
@@ -79,8 +114,13 @@ class TransmitHistory
        uint8_t count;
    };

-    std::map<uint16_t, uint32_t> history;    // key -> epoch seconds (for disk persistence)
-    std::map<uint16_t, uint32_t> lastMillis; // key -> millis() value (for runtime throttle)
+    uint32_t getLastSentAbsoluteMillis(uint32_t storedEpoch) const;
+    uint32_t getLastSentBootRelativeMillis(uint32_t storedSeconds) const;
+    static StoredTimestamp makeStoredTimestamp(uint32_t seconds, uint8_t flags = ENTRY_FLAG_NONE);
+    static StoredTimestamp decodeLegacyTimestamp(uint32_t seconds);
+
+    std::map<uint16_t, StoredTimestamp> history; // key -> persisted transmit time
+    std::map<uint16_t, uint32_t> lastMillis;     // key -> millis() value (for runtime throttle)
    bool dirty = false;
    uint32_t lastDiskSave = 0; // millis() of last disk flush
 };
@@ -102,7 +102,6 @@ static int32_t reconnectETH()

 #ifndef DISABLE_NTP
            LOG_INFO("Start NTP time client");
-            timeClient.begin();
            timeClient.setUpdateInterval(60 * 60); // Update once an hour
 #endif

@@ -159,6 +158,7 @@ static int32_t reconnectETH()
            LOG_ERROR("NTP Update failed");
            ntp_renew = millis() + 300 * 1000; // failure, retry every 5 minutes
        }
+        timeClient.end(); // W5100S: release UDP socket for other services
    }
 #endif

@@ -5,6 +5,8 @@
 #include <Arduino.h>
 #include <functional>

+#if !MESHTASTIC_EXCLUDE_WEBSERVER
+
 void initWebServer();
 void createSSLCert();

@@ -24,3 +26,20 @@ class WebServerThread : private concurrency::OSThread
 };

 extern WebServerThread *webServerThread;
+
+#else
+// Stub implementations when web server is excluded
+inline void initWebServer() {}
+inline void createSSLCert() {}
+
+class WebServerThread
+{
+  public:
+    WebServerThread() {}
+    uint32_t requestRestart = 0;
+    void markActivity() {}
+};
+
+inline WebServerThread *webServerThread = nullptr;
+
+#endif
@@ -38,7 +38,7 @@
 #include "modules/PositionModule.h"
 #endif

-#if !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_I2C
+#if !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_I2C && !MESHTASTIC_EXCLUDE_ACCELEROMETER
 #include "motion/AccelerometerThread.h"
 #endif
 #if (defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_RP2040)) && !defined(CONFIG_IDF_TARGET_ESP32S2) &&               \
@@ -637,7 +637,8 @@ void AdminModule::handleSetConfig(const meshtastic_Config &c)
    case meshtastic_Config_device_tag:
        LOG_INFO("Set config: Device");
        config.has_device = true;
-#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
+#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR &&                            \
+    !MESHTASTIC_EXCLUDE_ACCELEROMETER
        if (config.device.double_tap_as_button_press == false && c.payload_variant.device.double_tap_as_button_press == true &&
            accelerometerThread->enabled == false) {
            config.device.double_tap_as_button_press = c.payload_variant.device.double_tap_as_button_press;
@@ -739,7 +740,8 @@ void AdminModule::handleSetConfig(const meshtastic_Config &c)
                   c.payload_variant.display.displaymode == meshtastic_Config_DisplayConfig_DisplayMode_COLOR) {
            config.bluetooth.enabled = false;
        }
-#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
+#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR &&                            \
+    !MESHTASTIC_EXCLUDE_ACCELEROMETER
        if (config.display.wake_on_tap_or_motion == false && c.payload_variant.display.wake_on_tap_or_motion == true &&
            accelerometerThread->enabled == false) {
            config.display.wake_on_tap_or_motion = c.payload_variant.display.wake_on_tap_or_motion;
@@ -203,6 +203,10 @@ void ExternalNotificationModule::setExternalState(uint8_t index, bool on)
    default:
        if (output > 0)
            digitalWrite(output, (moduleConfig.external_notification.active ? on : !on));
+#ifdef PCA_LED_NOTIFICATION
+        io.digitalWrite(PCA_LED_NOTIFICATION, on);
+
+#endif
        break;
    }

@@ -350,12 +354,6 @@ ProcessMessage ExternalNotificationModule::handleReceived(const meshtastic_MeshP
 {
    // Trigger external notification if enabled and not muted; isSilenced is from temporary mute toggles
    if (moduleConfig.external_notification.enabled && !isSilenced) {
-#ifdef T_WATCH_S3
-        drv.setWaveform(0, 75);
-        drv.setWaveform(1, 56);
-        drv.setWaveform(2, 0);
-        drv.go();
-#endif
        if (!isFromUs(&mp)) {
            // Check if the message contains a bell character. Don't do this loop for every pin, just once.
            auto &p = mp.decoded;
@@ -380,60 +378,69 @@ ProcessMessage ExternalNotificationModule::handleReceived(const meshtastic_MeshP
            const bool buzzerModeIsDirectOnly =
                (config.device.buzzer_mode == meshtastic_Config_DeviceConfig_BuzzerMode_DIRECT_MSG_ONLY);

-            if (containsBell || !is_muted) {
-                if (moduleConfig.external_notification.alert_bell || moduleConfig.external_notification.alert_message ||
-                    moduleConfig.external_notification.alert_bell_vibra ||
-                    moduleConfig.external_notification.alert_message_vibra ||
-                    ((moduleConfig.external_notification.alert_bell_buzzer ||
-                      moduleConfig.external_notification.alert_message_buzzer) &&
-                     canBuzz())) {
-                    nagCycleCutoff = millis() + (moduleConfig.external_notification.nag_timeout
-                                                     ? (moduleConfig.external_notification.nag_timeout * 1000)
-                                                     : moduleConfig.external_notification.output_ms);
-                    LOG_INFO("Toggling nagCycleCutoff to %lu", nagCycleCutoff);
-                    isNagging = true;
-                }
+            // Each output evaluates its own alert condition independently:
+            // alert_bell_* fires only when a bell character is present.
+            // alert_message_* fires on any non-muted message.

-                if (moduleConfig.external_notification.alert_bell || moduleConfig.external_notification.alert_message) {
-                    LOG_INFO("externalNotificationModule - Notification Module or Bell");
-                    setExternalState(0, true);
-                }
+            // Alert when receiving a bell = alertBell: true
+            // Alert when receiving a message = alertMessage: true
+            const bool genericShouldAlert = (moduleConfig.external_notification.alert_bell && containsBell) ||
+                                            (moduleConfig.external_notification.alert_message && !is_muted);

-                if (moduleConfig.external_notification.alert_bell_vibra ||
-                    moduleConfig.external_notification.alert_message_vibra) {
-                    LOG_INFO("externalNotificationModule - Notification Module or Bell (Vibra)");
-                    setExternalState(1, true);
-                }
+            // Alert GPIO Vibra when receiving a bell = alertBellVibra: true
+            // Alert GPIO Vibra when receiving a message = alertMessageVibra: true
+            const bool vibraShouldAlert = (moduleConfig.external_notification.alert_bell_vibra && containsBell) ||
+                                          (moduleConfig.external_notification.alert_message_vibra && !is_muted);

-                if ((moduleConfig.external_notification.alert_bell_buzzer ||
-                     moduleConfig.external_notification.alert_message_buzzer) &&
-                    canBuzz()) {
-                    LOG_INFO("externalNotificationModule - Notification Module or Bell (Buzzer)");
-                    if (buzzerModeIsDirectOnly && !isDmToUs && !containsBell) {
-                        LOG_INFO("Message buzzer was suppressed because buzzer mode DIRECT_MSG_ONLY");
-                    } else {
-                        // Buzz if buzzer mode is not in DIRECT_MSG_ONLY or is DM to us
-#ifdef T_LORA_PAGER
-                        drv.setWaveform(0, 16); // Long buzzer 100%
-                        drv.setWaveform(1, 0);  // Pause
-                        drv.setWaveform(2, 16);
-                        drv.setWaveform(3, 0);
-                        drv.setWaveform(4, 16);
-                        drv.setWaveform(5, 0);
-                        drv.setWaveform(6, 16);
-                        drv.setWaveform(7, 0);
-                        drv.go();
+            // Alert GPIO Buzzer when receiving a bell = alertBellBuzzer: true
+            // Alert GPIO Buzzer when receiving a message = alertMessageBuzzer: true
+            const bool buzzerShouldAlert = canBuzz() && ((moduleConfig.external_notification.alert_bell_buzzer && containsBell) ||
+                                                         (moduleConfig.external_notification.alert_message_buzzer && !is_muted));
+
+            if (genericShouldAlert || vibraShouldAlert || buzzerShouldAlert) {
+                nagCycleCutoff = millis() + (moduleConfig.external_notification.nag_timeout
+                                                 ? (moduleConfig.external_notification.nag_timeout * 1000)
+                                                 : moduleConfig.external_notification.output_ms);
+                LOG_INFO("Toggling nagCycleCutoff to %lu", nagCycleCutoff);
+                isNagging = true;
+            }
+
+            if (genericShouldAlert) {
+                LOG_INFO("externalNotificationModule - Generic alert");
+                setExternalState(0, true);
+            }
+
+            if (vibraShouldAlert) {
+                LOG_INFO("externalNotificationModule - Vibra alert");
+                setExternalState(1, true);
+            }
+
+            if (buzzerShouldAlert) {
+                LOG_INFO("externalNotificationModule - Buzzer alert");
+                if (buzzerModeIsDirectOnly && !isDmToUs && !containsBell) {
+                    LOG_INFO("Message buzzer was suppressed because buzzer mode DIRECT_MSG_ONLY");
+                } else {
+                    // Buzz if buzzer mode is not in DIRECT_MSG_ONLY or is DM to us
+#ifdef HAS_DRV2605
+                    drv.setWaveform(0, 16); // Long buzzer 100%
+                    drv.setWaveform(1, 0);  // Pause
+                    drv.setWaveform(2, 16);
+                    drv.setWaveform(3, 0);
+                    drv.setWaveform(4, 16);
+                    drv.setWaveform(5, 0);
+                    drv.setWaveform(6, 16);
+                    drv.setWaveform(7, 0);
+                    drv.go();
 #endif
+
+                    if (moduleConfig.external_notification.use_i2s_as_buzzer) {
 #ifdef HAS_I2S
-                        if (moduleConfig.external_notification.use_i2s_as_buzzer) {
-                            audioThread->beginRttl(rtttlConfig.ringtone, strlen_P(rtttlConfig.ringtone));
-                        } else
+                        audioThread->beginRttl(rtttlConfig.ringtone, strlen_P(rtttlConfig.ringtone));
 #endif
-                            if (moduleConfig.external_notification.use_pwm) {
-                            rtttl::begin(config.device.buzzer_gpio, rtttlConfig.ringtone);
-                        } else {
-                            setExternalState(2, true);
-                        }
+                    } else if (moduleConfig.external_notification.use_pwm) {
+                        rtttl::begin(config.device.buzzer_gpio, rtttlConfig.ringtone);
+                    } else {
+                        setExternalState(2, true);
                    }
                }
            }
@@ -513,4 +520,4 @@ int ExternalNotificationModule::handleInputEvent(const InputEvent *event)
        return 1;
    }
    return 0;
-}
+}
@@ -118,6 +118,12 @@ void NodeInfoModule::sendOurNodeInfo(NodeNum dest, bool wantReplies, uint8_t cha
    }
 }

+void NodeInfoModule::triggerImmediateNodeInfoCheck()
+{
+    LOG_DEBUG("NodeInfo: scheduling immediate periodic check");
+    setIntervalFromNow(0);
+}
+
 meshtastic_MeshPacket *NodeInfoModule::allocReply()
 {
    // Only apply suppression when actually replying to someone else's request, not for periodic broadcasts.
@@ -24,6 +24,12 @@ class NodeInfoModule : public ProtobufModule<meshtastic_User>, private concurren
    void sendOurNodeInfo(NodeNum dest = NODENUM_BROADCAST, bool wantReplies = false, uint8_t channel = 0,
                         bool _shorterTimeout = false);

+    /**
+     * Schedule an immediate NodeInfo periodic check.
+     * Used when external conditions change (for example time source quality).
+     */
+    void triggerImmediateNodeInfoCheck();
+
  protected:
    /** Called to handle a particular incoming message

@@ -20,10 +20,11 @@ bool RoutingModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, mesh
        if ((nodeDB->getMeshNode(mp.from) == NULL || !nodeDB->getMeshNode(mp.from)->has_user) &&
            (nodeDB->getMeshNode(mp.to) == NULL || !nodeDB->getMeshNode(mp.to)->has_user))
            return false;
-    } else if (owner.is_licensed && nodeDB->getLicenseStatus(mp.from) == UserLicenseStatus::NotLicensed) {
-        // Don't let licensed users to rebroadcast packets from unlicensed users
+    } else if (owner.is_licensed && ((nodeDB->getLicenseStatus(mp.from) == UserLicenseStatus::NotLicensed) ||
+                                     (nodeDB->getLicenseStatus(mp.to) == UserLicenseStatus::NotLicensed))) {
+        // Don't let licensed users to rebroadcast packets to or from unlicensed users
        // If we know they are in-fact unlicensed
-        LOG_DEBUG("Packet from unlicensed user, ignoring packet");
+        LOG_DEBUG("Packet to or from unlicensed user, ignoring packet");
        return false;
    }

@@ -4,7 +4,7 @@

 #include "configuration.h"

-#if !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_I2C
+#if !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_I2C && !MESHTASTIC_EXCLUDE_ACCELEROMETER

 #include "../concurrency/OSThread.h"
 #ifdef HAS_BMA423
@@ -651,22 +651,34 @@ bool MQTT::isValidConfig(const meshtastic_ModuleConfig_MQTTConfig &config, MQTTC

    if (config.enabled && !config.proxy_to_client_enabled) {
 #if HAS_NETWORKING
-        std::unique_ptr<MQTTClient> clientConnection;
        if (config.tls_enabled) {
-#if MQTT_SUPPORTS_TLS
-            MQTTClientTLS *tlsClient = new MQTTClientTLS;
-            clientConnection.reset(tlsClient);
-            tlsClient->setInsecure();
-#else
+#if !MQTT_SUPPORTS_TLS
            LOG_ERROR("Invalid MQTT config: tls_enabled is not supported on this node");
            return false;
 #endif
-        } else {
-            clientConnection.reset(new MQTTClient);
        }
-        std::unique_ptr<PubSubClient> pubSub(new PubSubClient);
+        // Perform a lightweight TCP connectivity check without using connectPubSub(),
+        // which mutates the module's isConnected state. This only checks if the server
+        // is reachable — it does not establish an MQTT session.
+        // Settings are always saved regardless of the result.
        if (isConnectedToNetwork()) {
-            return connectPubSub(parsed, *pubSub, (client != nullptr) ? *client : *clientConnection);
+            MQTTClient testClient;
+            if (!testClient.connect(parsed.serverAddr.c_str(), parsed.serverPort)) {
+                const char *warning = "Could not reach the MQTT server. Settings will be saved, but please verify the server "
+                                      "address and credentials.";
+                LOG_WARN(warning);
+#if !IS_RUNNING_TESTS
+                meshtastic_ClientNotification *cn = clientNotificationPool.allocZeroed();
+                if (cn) {
+                    cn->level = meshtastic_LogRecord_Level_WARNING;
+                    cn->time = getValidTime(RTCQualityFromNet);
+                    strncpy(cn->message, warning, sizeof(cn->message) - 1);
+                    cn->message[sizeof(cn->message) - 1] = '\0';
+                    service->sendClientNotification(cn);
+                }
+#endif
+            }
+            testClient.stop();
        }
 #else
        const char *warning = "Invalid MQTT config: proxy_to_client_enabled must be enabled on nodes that do not have a network";
@@ -231,7 +231,9 @@ void cpuDeepSleep(uint32_t msecToWake)
 #if SOC_RTCIO_HOLD_SUPPORTED && SOC_PM_SUPPORT_EXT_WAKEUP
    uint64_t gpioMask = (1ULL << (config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN));
 #endif
-
+#ifdef ALT_BUTTON_WAKE
+    gpioMask |= (1ULL << BUTTON_PIN_ALT);
+#endif
 #ifdef BUTTON_NEED_PULLUP
    gpio_pullup_en((gpio_num_t)BUTTON_PIN);
 #endif
@@ -23,5 +23,6 @@ void lateInitVariant()
    cfg.i2s.bits = BIT_LENGTH_16BITS;
    cfg.i2s.rate = RATE_44K;
    board.begin(cfg);
+    board.setVolume(75); // 75% volume
 }
 #endif
@@ -0,0 +1,13 @@
+#include "Nrf52SaadcLock.h"
+#include "concurrency/Lock.h"
+#include "configuration.h"
+
+#ifdef ARCH_NRF52
+
+namespace concurrency
+{
+static Lock nrf52SaadcLockInstance;
+Lock *nrf52SaadcLock = &nrf52SaadcLockInstance;
+} // namespace concurrency
+
+#endif
@@ -0,0 +1,12 @@
+#pragma once
+
+#ifdef ARCH_NRF52
+
+namespace concurrency
+{
+class Lock;
+/** Shared mutex for SAADC configuration and reads (VDD + battery analog path). */
+extern Lock *nrf52SaadcLock;
+} // namespace concurrency
+
+#endif
@@ -25,6 +25,8 @@
 #include "power.h"
 #include <power/PowerHAL.h>

+#include "Nrf52SaadcLock.h"
+#include "concurrency/LockGuard.h"
 #include <hal/nrf_lpcomp.h>

 #ifdef BQ25703A_ADDR
@@ -51,6 +53,10 @@ uint16_t getVDDVoltage();
 void variant_shutdown() __attribute__((weak));
 void variant_shutdown() {}

+// Optional variant hook called each nrf52Loop(); e.g. for low-VDD System OFF.
+void variant_nrf52LoopHook(void) __attribute__((weak));
+void variant_nrf52LoopHook(void) {}
+
 static nrfx_wdt_t nrfx_wdt = NRFX_WDT_INSTANCE(0);
 static nrfx_wdt_channel_id nrfx_wdt_channel_id_nrf52_main;

@@ -74,11 +80,18 @@ bool powerHAL_isVBUSConnected()

 bool powerHAL_isPowerLevelSafe()
 {
-
    static bool powerLevelSafe = true;

-    uint16_t threshold = SAFE_VDD_VOLTAGE_THRESHOLD * 1000; // convert V to mV
-    uint16_t hysteresis = SAFE_VDD_VOLTAGE_THRESHOLD_HYST * 1000;
+#ifdef SAFE_VDD_VOLTAGE_THRESHOLD_MV
+    uint16_t threshold = SAFE_VDD_VOLTAGE_THRESHOLD_MV;
+#else
+    uint16_t threshold = (uint16_t)(SAFE_VDD_VOLTAGE_THRESHOLD * 1000.0f + 0.5f); // convert V to mV
+#endif
+#ifdef SAFE_VDD_VOLTAGE_THRESHOLD_HYST_MV
+    uint16_t hysteresis = SAFE_VDD_VOLTAGE_THRESHOLD_HYST_MV;
+#else
+    uint16_t hysteresis = (uint16_t)(SAFE_VDD_VOLTAGE_THRESHOLD_HYST * 1000.0f + 0.5f);
+#endif

    if (powerLevelSafe) {
        if (getVDDVoltage() < threshold) {
@@ -125,11 +138,12 @@ void powerHAL_platformInit()
 // get VDD voltage (in millivolts)
 uint16_t getVDDVoltage()
 {
-    // we use the same values as regular battery read so there is no conflict on SAADC
+    concurrency::LockGuard guard(concurrency::nrf52SaadcLock);
+
+    // Match battery read resolution; SAADC is shared with AnalogBatteryLevel in Power.cpp.
    analogReadResolution(BATTERY_SENSE_RESOLUTION_BITS);

    // VDD range on NRF52840 is 1.8-3.3V so we need to remap analog reference to 3.6V
-    // let's hope battery reading runs in same task and we don't have race condition
    analogReference(AR_INTERNAL);

    uint16_t vddADCRead = analogReadVDD();
@@ -326,6 +340,8 @@ void nrf52Loop()

    checkSDEvents();
    reportLittleFSCorruptionOnce();
+
+    variant_nrf52LoopHook(); // Optional variant hook called each nrf52Loop();
 }

 #ifdef USE_SEMIHOSTING
@@ -818,16 +818,13 @@ void test_configEmptyIsValid(void)
    TEST_ASSERT_TRUE(MQTT::isValidConfig(config));
 }

-// Empty 'enabled' configuration is valid.
+// Empty 'enabled' configuration is valid. A lightweight TCP check may be performed
+// but does not affect the result.
 void test_configEnabledEmptyIsValid(void)
 {
    meshtastic_ModuleConfig_MQTTConfig config = {.enabled = true};
-    MockPubSubServer client;

-    TEST_ASSERT_TRUE(MQTTUnitTest::isValidConfig(config, &client));
-    TEST_ASSERT_TRUE(client.connected_);
-    TEST_ASSERT_EQUAL_STRING(default_mqtt_address, client.host_.c_str());
-    TEST_ASSERT_EQUAL(1883, client.port_);
+    TEST_ASSERT_TRUE(MQTT::isValidConfig(config));
 }

 // Configuration with the default server is valid.
@@ -846,38 +843,32 @@ void test_configWithDefaultServerAndInvalidPort(void)
    TEST_ASSERT_FALSE(MQTT::isValidConfig(config));
 }

-// isValidConfig connects to a custom host and port.
+// Custom host and port is valid. TCP reachability is checked but does not block saving.
 void test_configCustomHostAndPort(void)
 {
    meshtastic_ModuleConfig_MQTTConfig config = {.enabled = true, .address = "server:1234"};
-    MockPubSubServer client;

-    TEST_ASSERT_TRUE(MQTTUnitTest::isValidConfig(config, &client));
-    TEST_ASSERT_TRUE(client.connected_);
-    TEST_ASSERT_EQUAL_STRING("server", client.host_.c_str());
-    TEST_ASSERT_EQUAL(1234, client.port_);
+    TEST_ASSERT_TRUE(MQTT::isValidConfig(config));
 }

-// isValidConfig returns false if a connection cannot be established.
-void test_configWithConnectionFailure(void)
+// An unreachable server is still a valid config — settings always save.
+// A warning notification is sent in non-test builds, but isValidConfig returns true.
+void test_configWithUnreachableServerIsStillValid(void)
 {
    meshtastic_ModuleConfig_MQTTConfig config = {.enabled = true, .address = "server"};
-    MockPubSubServer client;
-    client.refuseConnection_ = true;

-    TEST_ASSERT_FALSE(MQTTUnitTest::isValidConfig(config, &client));
+    TEST_ASSERT_TRUE(MQTT::isValidConfig(config));
 }

 // isValidConfig returns true when tls_enabled is supported, or false otherwise.
 void test_configWithTLSEnabled(void)
 {
    meshtastic_ModuleConfig_MQTTConfig config = {.enabled = true, .address = "server", .tls_enabled = true};
-    MockPubSubServer client;

 #if MQTT_SUPPORTS_TLS
-    TEST_ASSERT_TRUE(MQTTUnitTest::isValidConfig(config, &client));
+    TEST_ASSERT_TRUE(MQTT::isValidConfig(config));
 #else
-    TEST_ASSERT_FALSE(MQTTUnitTest::isValidConfig(config, &client));
+    TEST_ASSERT_FALSE(MQTT::isValidConfig(config));
 #endif
 }

@@ -927,7 +918,7 @@ void setup()
    RUN_TEST(test_configWithDefaultServer);
    RUN_TEST(test_configWithDefaultServerAndInvalidPort);
    RUN_TEST(test_configCustomHostAndPort);
-    RUN_TEST(test_configWithConnectionFailure);
+    RUN_TEST(test_configWithUnreachableServerIsStillValid);
    RUN_TEST(test_configWithTLSEnabled);
    exit(UNITY_END());
 }
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Ben Meadors	1370b234eb	Add build flag to exclude web server in MUI build for Wismesh Tap V2	2026-04-05 07:48:24 -05:00
Ben Meadors	9ba44bfbfb	Set T-LoRA pager audio board volume to 75%	2026-04-04 20:05:22 -05:00
github-actions[bot]GitHub vidplace7	934c3fa8be	Upgrade trunk (#10047 ) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>	2026-04-03 06:39:53 -05:00
Kittiwut KhongkaeoandGitHub	7f0cd70c07	Align 920–925 MHz limits as per NBTC in Thailand (27 dBm, 10% duty cycle) (#9827 )	2026-04-03 08:27:36 +11:00
renovate[bot]GitHubrenovate[bot] <29139614+renovate[bot]@users.noreply.github.com>	d5fe7dc9e6	Update meshtastic/device-ui digest to dfdcf00 (#10050 ) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>	2026-04-02 06:34:31 -05:00
Jonathan BennettandGitHub	98efb25a0c	Thinknode_m5 minor fixes (#10049 )	2026-04-01 21:13:16 -05:00
Manuel GitHub Ben Meadors	8dc3c0541b	feat: Mesh-tab wifi map + exclude screen fix (#10038 ) * fix MESHTASTIC_EXCLUDE_SCREEN * mesh-tab map constraints (2 MB PSRAM) * point MUI commit to the related PR --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2026-04-01 08:03:34 -05:00
github-actions[bot]GitHub vidplace7	fc6c89abeb	Upgrade trunk (#10041 ) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>	2026-03-31 14:36:29 -05:00
renovate[bot]GitHubrenovate[bot] <29139614+renovate[bot]@users.noreply.github.com>	c7feef00c0	Update meshtastic/device-ui digest to 7b1485b (#10044 ) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>	2026-03-31 14:07:11 -05:00
Ethac.chenandBen Meadors	8c905427a1	Fix rak_wismeshtag low‑voltage reboot hang after App configuration (#9897 ) * Fix TAG low‑voltage reboot hang after App configuration * nRF52: Move low-VDD System OFF logic to variant hook * Addressed review * serialize SAADC access with shared mutex for VDD and battery reads * raise LPCOMP wake threshold to ensure rising-edge wake * Trunk fmt --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2026-03-31 07:37:46 -05:00
AustinandBen Meadors	90befeeeb1	Add timeout to PPA uploads (#9989 ) Don't allow dput to run for more than 15 minutes (successful runs take about ~8 minutes)	2026-03-31 07:36:21 -05:00
TomandBen Meadors	9e61c44629	fix(routing): prevent licensed users from rebroadcasting packets to or from unlicensed users (#9958 ) * fix(routing): prevent licensed users from rebroadcasting packets from unlicensed or unknown users * fix(routing): prevent licensed users from rebroadcasting packets to or from unlicensed users --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2026-03-31 07:36:04 -05:00
ManuelandBen Meadors	3ad80b80ee	MUI: WiFi map tile download: heltec V4 adaptations (#10011 ) * rotated MUI * mui-maps heltec-v4 adaptations --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2026-03-31 07:26:39 -05:00
Philip LykovandBen Meadors	8fe12e9fda	Fix W5100S socket exhaustion blocking MQTT and additional TCP clients (#9770 ) The W5100S Ethernet chip has only 4 hardware sockets. On RAK4631 Ethernet gateways with syslog and NTP enabled, all 4 sockets were permanently consumed (NTP UDP + Syslog UDP + TCP API listener + TCP API client), leaving none for MQTT, DHCP lease renewal, or additional TCP connections. - NTP: Remove permanent timeClient.begin() at startup; NTPClient::update() auto-initializes when needed. Add timeClient.end() after each query to release the UDP socket immediately. - Syslog: Remove socket allocation from Syslog::enable(). Open and close the UDP socket on-demand in _sendLog() around each message send. - MQTT: Fix socket leak in isValidConfig() where a successful test connection was never closed (PubSubClient destructor does not call disconnect). Add explicit pubSub->disconnect() before returning. Made-with: Cursor Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2026-03-31 07:23:59 -05:00
AustinandGitHub	4e05f20c58	Renovate: Don't update branches outside the schedule (daily) (#10039 ) Renovate is still running after each merge... maybe this will fix it	2026-03-30 14:36:59 -05:00
AustinandGitHub	33d526f6f9	Set t5s3_epaper_inkhud to `extra` (#10037 ) t5s3_epaper_inkhud is incomplete (missing macros). Disable it for now. Also fixes the board_check evaluation so that `false` actually works.	2026-03-30 13:30:54 -05:00
AustinandGitHub	0abd3cdde8	ESP32: Take away "tbeam" boards PSRAM to reclaim iram (#10036 ) You read that right! Disable PSRAM on the ttgo-tbeam board to reclaim iram. ttgo-tbeam.json is a copy of https://github.com/platformio/platform-espressif32/blob/v6.13.0/boards/ttgo-t-beam.json with HAS_PSRAM removed. PSRAM support on OG-ESP32 involves a lot of iram usage thanks to iram-heavy workarounds that have been added to address hardware bugs. See https://docs.espressif.com/projects/esp-idf/en/v4.4/esp32/api-guides/performance/ram-usage.html#optimizing-iram-usage	2026-03-30 13:20:19 -05:00
AustinandGitHub	870ba80092	wio-sdk-wm1110: inherit build_unflags (#10034 )	2026-03-30 10:14:43 -05:00
TomandBen Meadors	2955c12d2a	Configure NFC pins as GPIO for older bootloaders (#10016 ) * Configure NFC pins as GPIO for older bootloaders Should hopefully solve the issue in https://github.com/meshtastic/firmware/issues/9986 * Fix formatting of CONFIG_NFCT_PINS_AS_GPIOS flag in platformio.ini --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2026-03-30 09:06:09 -05:00
github-actions[bot]GitHub vidplace7	198339873a	Upgrade trunk (#10033 ) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>	2026-03-30 06:29:40 -05:00
Austin Lane	29d70853e6	Renovate: Run once daily (not upon EVERY change) Cut down on the spammin! Give the PIO Registry a break!	2026-03-29 14:45:52 -04:00
Austin Lane	976d201fc1	Hack: Use re-uploaded framework-arduinoespressif32 on ESP32c6 Dirty hack to keep ESP32c6 building. Remove when updating to pioarduino	2026-03-29 13:47:59 -04:00
Austin Lane	80763ca235	Move core lib_deps to github zips PlatformIO registry is (probably) rate limiting us. Mitigate by switching to GitHub source zips (based upon tags). This change does not include any updates, simply swapping to a new download location.	2026-03-29 12:35:04 -04:00
renovate[bot]GitHubrenovate[bot] <29139614+renovate[bot]@users.noreply.github.com>	844f5b46d0	Update meshtastic/device-ui digest to 7b1485b (#10023 ) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>	2026-03-29 10:55:47 -04:00
ManuelandBen Meadors	aec98b61b9	MUI: WiFi map tile download: heltec V4 adaptations (#10011 ) * rotated MUI * mui-maps heltec-v4 adaptations --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2026-03-27 15:40:07 -05:00
Ben MeadorsandGitHub	99abfebc4a	Fix TransmitHistory to improve epoch handling (#10017 ) * Fix TransmitHistory to improve epoch handling * Enable epoch handling in unit tests * Improve comments and test handling for epoch persistence in TransmitHistory * Add boot-relative timestamp handling and unit tests for TransmitHistory * loadFromDisk should handle legacy entries and clean up old v1 files after migration * Revert "loadFromDisk should handle legacy entries and clean up old v1 files after migration" This reverts commit `eb7e5c7acf`. * Add NodeInfoModule integration for RTC quality changes and trigger immediate checks * Update test conditions for RTC quality checks	2026-03-27 15:38:41 -05:00
AustinandGitHub	068f5af4d8	Add meshtasticd config metadata (#10001 ) To be consumed by config-picker utils, and hopefully meshtasticd itself in the future.	2026-03-27 11:38:49 -05:00
Chloe BethelandBen Meadors	993c242202	Supporting STM32WL is like squeezing blood from a stone (#10015 )	2026-03-27 06:53:49 -05:00
github-actions[bot]GitHub vidplace7	3d4f0b895b	Upgrade trunk (#9978 ) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>	2026-03-27 06:35:56 -05:00
renovate[bot]GitHubrenovate[bot] <29139614+renovate[bot]@users.noreply.github.com>	3b29eea577	Update Adafruit_BME680 to v2.0.6 (#10009 ) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>	2026-03-26 06:45:48 -05:00
AustinandGitHub	e7e34e86d5	Dependencies: Remove all fuzzy-matches, spot-add renovate (#10008 )	2026-03-26 06:16:08 -05:00
AustinandGitHub	5a009889cc	Deps: Cleanup LewisHe library references (#10007 ) We cache and dedupe our dependencies, referring to them with multiple methods/urls is just noise. ``` lewisxhe/XPowersLib@0.3.3 lewisxhe/SensorLib@0.3.4 ``` This does not include any updates, just a cleanup.	2026-03-25 19:27:48 -04:00
Ben Meadors GitHub Copilot	c4bac04be3	Exclude web server, paxcounter and few others from original ESP32 generation to fix IRAM overflow (#10005 ) * Exclude web server, paxcounter and few others from original ESP32 generation to fix IRAM overflow * Update variants/esp32/esp32.ini Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update variants/esp32/esp32.ini Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update build source filter in esp32.ini Removed WiFiAPClient.cpp from build source filter. --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2026-03-25 17:52:02 -05:00
Jason PandBen Meadors	b9bdc87367	Update External Notifications with a full redo of logic gates (#10006 ) * Update External Notifications with a full redo of pathways * Correct comments. * Fix TWatch S3 and use HAS_DRV2605	2026-03-25 14:47:34 -05:00
Manuel GitHub Thomas Göttgens Jason P Jonathan Bennett Ben Meadors	3b079c91bf	T5-4.7-S3 Epaper Pro support (#6625 ) * preliminary io pin definitions * Update product link * Move to new variant structure and refactor inkHUD - Display does not work and SX1262 init fails on HT752-02 * update variant definitions * add EPD driver * fix lora, add v1/v2 variant targets * adapt pins for v1/v2 * alt button * add compile guards * use lilygo epd47 lib * workaround for INT ERR_NOT_FOUND * USE_EPD (e-ink parallel display) * use FastEPD driver * create screen * EInkParallelDisplay definition * setup screen * dispaly() implementation * enable touchscreen * rotate touch screen * refactor display buffer processing * provide local copy of TwoWire instance as the touch driver calls end() * use larger fonts * replace touch driver; enable debugging * replace touch driver; enable debugging * consider bitsremain == 0 * tryfix crash * fix button * update touch driver * set lora_cs pin * update touch driver and lib reference * add locks * limit Ghosting similar to EInkDynamicDisplay * workaround for FastEPD partial update bug (artifacts) * display() code cleanup * fix a few platformio definitions * more EPD display cleanup * set rotation * use FastEPD arduino I2C by default * touch rotation * update screen for EPD * increase swipe distance for larger screen * EPD UIRenderer * trunk fmt * further #ifdef USE_EPD * disable rotation which messes up w/h; more cleanup * switch off ghosting algo * releease build; V1 buttons * swap V1 buttons * rearrange USE_EINK/EPD macros, use large font * cleanup (revert modified files) * more cleanup * revert * revert file * revert file Removed redundant line continuation in preprocessor directives. * Temporary gate off PSRam calculations until we can fix them * move variant.cpp and update commit references * revert wrong merge * add earlyInitVariant() * initialize all port 0 pins (0-7) as outputs / HIGH --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Jason P <applewiz@mac.com> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2026-03-25 10:52:18 -05:00
Ben MeadorsandGitHub	d693fd4232	Exclude accelerometer on new MESHTASTIC_EXCLUDE_ACCELEROMETER flag (#10004 )	2026-03-25 08:57:29 -05:00
Manuel GitHub Jonathan Bennett	163c54877c	fix: Cardputer-Adv I2S sound (#9963 ) * fix cardputer sound * Add I2S BLEEBLEs * MenuHandler ifdefs * add generic tone -> I2S RTTTL conversion * not needed --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>	2026-03-24 12:39:21 -05:00
Ben Meadors	2e2993f180	Add gnu++17 standard to nRF52840 build flags	2026-03-24 08:39:20 -05:00
Austin Lane	450f2adab0	Remove unneeded GH perms Reduce perms to least-necessary Remove merge_queue.yml since it's never been used and is now stale Remove comment-artifact, it hasn't worked in ages.	2026-03-24 08:14:05 -04:00
renovate[bot]GitHubrenovate[bot] <29139614+renovate[bot]@users.noreply.github.com>	0ad1b66387	Update dorny/test-reporter action to v3 (#9981 ) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>	2026-03-23 15:10:58 -04:00
Austin Lane	5716aeba3b	Cleanup GH Actions	2026-03-23 11:27:09 -04:00
stmka_playgoundandBen Meadors	723209b198	Fixes #9850 : Double space issue with Cyrillic OLED font (#9971 ) * Fixes double space OLEDDisplayFontsRU.cpp * Fixes double space OLEDDisplayFontsUA.cpp --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2026-03-23 07:07:20 -05:00
Quency-D Ben Meadors Copilot	5a8ce60d68	add heltec_mesh_node_t096 board. (#9960 ) * add heltec_mesh_node_t096 board. * Fixed the GPS reset pin comments. Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Added compiles if NUM_PA_POINTS is not defined. Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Correct the pin description. Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Specify the version of the dependency library TFT_eSPI. Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Adding fields missing from the .ini file. * Modify the screen SPI frequency to 40 MHz. Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2026-03-22 09:55:09 -05:00
Robert SasakandBen Meadors	c77b10a317	Add LED_BUILTIN for variant tlora_v1 (#9973 )	2026-03-22 09:37:41 -05:00
Okan ErturanandBen Meadors	8fa5b4f7ce	Fix: Enable touch-to-backlight on T-Echo (not just T-Echo Plus) (#9953 ) The touch-to-backlight feature was gated behind TTGO_T_ECHO_PLUS, but the regular T-Echo has the same backlight pin (PIN_EINK_EN, P1.11). This changes the guard to use PIN_EINK_EN only, so any device with an e-ink backlight pin gets the feature. Fixes #7630 Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2026-03-22 09:37:33 -05:00
Fernando Nunes Ben Meadors Copilot Autofix powered by AI Tom Fifield	e30294b6da	Fixes #9792 : Hop with Meshtastic ffff and ?dB is added to missing hop in traceroute (#9945 ) * Fix issue 9792, decode packet for TR test * Fix 9792: Assure packet id decoded for TR test * Potential fix for pull request finding Log improvement for failure to decode packet. Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com> * trunk fmt --------- Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com> Co-authored-by: Tom Fifield <tom@tomfifield.net>	2026-03-22 09:37:22 -05:00
rcatal01andBen Meadors	948c28afff	fix: MQTT settings silently fail to persist when broker is unreachable (#9934 ) * fix: MQTT settings silently fail to persist when broker is unreachable isValidConfig() was testing broker connectivity via connectPubSub() as part of config validation. When the broker was unreachable (network not ready, DNS failure, server down), the function returned false, causing AdminModule to skip saving settings entirely — silently. This removes the connectivity test from isValidConfig(), which now only validates configuration correctness (TLS support, default server port). Connectivity is handled by the MQTT module's existing reconnect loop. Fixes #9107 * Add client warning notification when MQTT broker is unreachable Per maintainer feedback: instead of silently saving when the broker can't be reached, send a WARNING notification to the client saying "MQTT settings saved, but could not reach the MQTT server." Settings still always persist regardless of connectivity — the core fix from the previous commit is preserved. The notification is purely advisory so users know to double-check their server address and credentials if the connection test fails. When the network is not available at all, the connectivity check is skipped entirely with a log message. * Address Copilot review feedback - Fix warning message wording: "Settings will be saved" instead of "Settings saved" (notification fires before AdminModule persists) - Add null check on clientNotificationPool.allocZeroed() to prevent crash if pool is exhausted (matches AdminModule::sendWarning pattern) - Fix test comments to accurately describe conditional connectivity check behavior and IS_RUNNING_TESTS compile-out * Remove connectivity check from isValidConfig entirely Reverts the advisory connectivity check added in the previous commit. While the intent was to warn users about unreachable brokers, connectPubSub() mutates the isConnected state of the running MQTT module and performs synchronous network operations that can block the config-save path. The cleanest approach: isValidConfig() validates config correctness only (TLS support, default server port). The MQTT reconnect loop handles connectivity after settings are persisted and the device reboots. If the broker is unreachable, the user will see it in the MQTT connection status — no special notification needed. This returns to the simpler design from the first commit, which was tested on hardware and confirmed working. * Use lightweight TCP check instead of connectPubSub for validation Per maintainer feedback: users need connectivity feedback, but connectPubSub() mutates the module's isConnected state. This uses a standalone MQTTClient TCP connection test that: - Checks if the server IP/port is reachable - Sends a WARNING notification if unreachable - Does NOT establish an MQTT session or mutate any module state - Does NOT block saving — isValidConfig always returns true The TCP test client is created locally, used, and destroyed within the function scope. No side effects on the running MQTT module. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2026-03-22 09:37:11 -05:00