Protobufs

Add STC31 CO2 sensor support and related configurations
2026-02-11 06:24:02 -06:00 · 2026-02-11 06:23:38 -06:00
497 changed files with 3762 additions and 15721 deletions
@@ -20,7 +20,7 @@ ENV PIP_ROOT_USER_ACTION=ignore
 RUN apt-get update && apt-get install --no-install-recommends -y \
        cmake git zip libgpiod-dev libbluetooth-dev libi2c-dev \
        libunistring-dev libmicrohttpd-dev libgnutls28-dev libgcrypt20-dev \
-        libusb-1.0-0-dev libssl-dev pkg-config libsqlite3-dev libsdl2-dev && \
+        libusb-1.0-0-dev libssl-dev pkg-config libsqlite3-dev && \
    apt-get clean && rm -rf /var/lib/apt/lists/* && \
    pip install --no-cache-dir -U \
        platformio==6.1.16 \
@@ -100,7 +100,7 @@ runs:
      id: version

    - name: Store binaries as an artifact
-      uses: actions/upload-artifact@v7
+      uses: actions/upload-artifact@v6
      with:
        name: firmware-${{ inputs.arch }}-${{ inputs.board }}-${{ steps.version.outputs.long }}
        overwrite: true
@@ -8,6 +8,8 @@ runs:
      uses: actions/checkout@v6
      with:
        submodules: recursive
+        ref: ${{github.event.pull_request.head.ref}}
+        repository: ${{github.event.pull_request.head.repo.full_name}}

    - name: Install dependencies
      shell: bash
@@ -4,16 +4,16 @@

 - Before starting on some new big chunk of code, it it is optional but highly recommended to open an issue first
  to say "Hey, I think this idea X should be implemented and I'm starting work on it. My general plan is Y, any feedback
-  is appreciated." This will allow other devs to potentially save you time by not accidentally duplicating work etc...
+  is appreciated." This will allow other devs to potentially save you time by not accidentially duplicating work etc...
 - Please do not check in files that don't have real changes
 - Please do not reformat lines that you didn't have to change the code on
- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor along with the ['Trunk Check' extension](https://marketplace.visualstudio.com/items?itemName=trunk.io) (In beta for windows, WSL2 for the Linux version),
+- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor along with the ['Trunk Check' extension](https://marketplace.visualstudio.com/items?itemName=trunk.io) (In beta for windows, WSL2 for the linux version),
  because it automatically follows our indentation rules and its auto reformatting will not cause spurious changes to lines.
 - If your PR fixes a bug, mention "fixes #bugnum" somewhere in your pull request description.
 - If your other co-developers have comments on your PR please tweak as needed.
 - Please also enable "Allow edits by maintainers".
 - Please do not submit untested code.
- If you do not have the affected hardware to test your code changes adequately against regressions, please indicate this, so that contributors and community members can help test your changes.
+- If you do not have the affected hardware to test your code changes adequately against regressions, please indicate this, so that contributors and commnunity members can help test your changes.
 - If your PR gets accepted you can request a "Contributor" role in the Meshtastic Discord

 ## 🤝 Attestations
@@ -16,7 +16,8 @@ on:
        type: string

 permissions:
-  contents: read
+  contents: write
+  packages: write

 jobs:
  build-debian-src:
@@ -27,6 +28,8 @@ jobs:
        with:
          submodules: recursive
          path: meshtasticd
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}

      - name: Install deps
        shell: bash
@@ -39,8 +42,7 @@ jobs:
          sudo mk-build-deps --install --remove --tool='apt-get -o Debug::pkgProblemResolver=yes --no-install-recommends --yes' debian/control

      - name: Import GPG key
-        if: github.event_name != 'pull_request' && github.event_name != 'pull_request_target'
-        uses: crazy-max/ghaction-import-gpg@v7
+        uses: crazy-max/ghaction-import-gpg@v6
        with:
          gpg_private_key: ${{ secrets.PPA_GPG_PRIVATE_KEY }}
        id: gpg
@@ -58,11 +60,11 @@ jobs:
        run: debian/ci_pack_sdeb.sh
        env:
          SERIES: ${{ inputs.series }}
-          GPG_KEY_ID: ${{ steps.gpg.outputs.keyid || '' }}
+          GPG_KEY_ID: ${{ steps.gpg.outputs.keyid }}
          PKG_VERSION: ${{ steps.version.outputs.deb }}

      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        with:
          name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
          overwrite: true
@@ -26,6 +26,8 @@ jobs:
      - uses: actions/checkout@v6
        with:
          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}

      - name: Build ${{ inputs.platform }}
        id: build
@@ -109,7 +111,7 @@ jobs:
          echo "</details>" >> $GITHUB_STEP_SUMMARY

      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        id: upload-firmware
        with:
          name: firmware-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}
@@ -125,7 +127,7 @@ jobs:
            release/device-*.bat

      - name: Store manifests as an artifact
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        id: upload-manifest
        with:
          name: manifest-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}
@@ -4,14 +4,9 @@ on:
  workflow_dispatch:
    inputs:
      # trunk-ignore(checkov/CKV_GHA_7)
-      target:
-        type: string
-        required: false
-        description: Choose the target board, e.g. nrf52_promicro_diy_tcxo. If blank, will find available targets.
      arch:
        type: choice
        options:
-          - all
          - esp32
          - esp32s3
          - esp32c3
@@ -20,18 +15,32 @@ on:
          - rp2040
          - rp2350
          - stm32
-        description: Choose an arch to limit the search, or 'all' to search all architectures.
-        default: all
+      target:
+        type: string
+        required: false
+        description: Choose the target board, e.g. nrf52_promicro_diy_tcxo. If blank, will find available targets.
+      # find-target:
+      #   type: boolean
+      #   default: true
+      #   description: 'Find the available targets'

 permissions: read-all

 jobs:
  find-targets:
+    if: ${{ inputs.target == '' }}
    strategy:
      fail-fast: false
      matrix:
        arch:
-          - all
+          - esp32
+          - esp32s3
+          - esp32c3
+          - esp32c6
+          - nrf52840
+          - rp2040
+          - rp2350
+          - stm32
    runs-on: ubuntu-24.04
    steps:
      - uses: actions/checkout@v6
@@ -42,37 +51,14 @@ jobs:
      - run: pip install -U platformio
      - name: Generate matrix
        id: jsonStep
-        env:
-          BUILDTARGET: ${{ inputs.target }}
-          MATRIXARCH: ${{ inputs.arch }}
        run: |
          TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} --level extra)
-          if [ "$BUILDTARGET" = "" ]; then
-            echo "Name: $GITHUB_REF_NAME" >> $GITHUB_STEP_SUMMARY
-            echo "Base: $GITHUB_BASE_REF" >> $GITHUB_STEP_SUMMARY
-            echo "Arch: $MATRIXARCH" >> $GITHUB_STEP_SUMMARY
-            echo "Ref: $GITHUB_REF" >> $GITHUB_STEP_SUMMARY
-            echo "## 🎯 The following target boards are available to build:" >> $GITHUB_STEP_SUMMARY
-            echo "| Platform | Board |" >> $GITHUB_STEP_SUMMARY
-            echo "| -------- | ----- |" >> $GITHUB_STEP_SUMMARY
-            echo $TARGETS | jq -r 'sort_by(.board) | sort_by(.platform) |.[] | "| " + .platform + " | " + .board + " |" ' >> $GITHUB_STEP_SUMMARY
-          else
-            echo "We build this one:" >> $GITHUB_STEP_SUMMARY
-            ARCH=$(echo "$TARGETS" | jq --arg BUILDTARGET "$BUILDTARGET" -r '.[] | select(.board==$BUILDTARGET) | .platform')
-            echo "| Platform | Board |" >> $GITHUB_STEP_SUMMARY
-            echo "| -------- | ----- |" >> $GITHUB_STEP_SUMMARY
-            echo "| $ARCH | "$BUILDTARGET" |" >> $GITHUB_STEP_SUMMARY
-            echo "" >> $GITHUB_STEP_SUMMARY
-            if [[ "$ARCH" == "" ]]; then
-              echo "## ❌ Error: Target "$BUILDTARGET" not found!" >> $GITHUB_STEP_SUMMARY
-            else
-              echo "## ✅ Target "$BUILDTARGET" found, proceeding to build." >> $GITHUB_STEP_SUMMARY
-            fi
-            echo "You may need to refresh this page to make the built firmware appear below." >> $GITHUB_STEP_SUMMARY
-            echo "arch=$ARCH" >> $GITHUB_OUTPUT
-          fi
-    outputs:
-      arch: ${{ steps.jsonStep.outputs.arch }}
+          echo "Name: $GITHUB_REF_NAME" >> $GITHUB_STEP_SUMMARY
+          echo "Base: $GITHUB_BASE_REF" >> $GITHUB_STEP_SUMMARY
+          echo "Arch: ${{matrix.arch}}" >> $GITHUB_STEP_SUMMARY
+          echo "Ref: $GITHUB_REF" >> $GITHUB_STEP_SUMMARY
+          echo "Targets:" >> $GITHUB_STEP_SUMMARY
+          echo $TARGETS | jq -r 'sort_by(.board) |.[] | "- " + .board' >> $GITHUB_STEP_SUMMARY

  version:
    if: ${{ inputs.target != '' }}
@@ -92,16 +78,16 @@ jobs:

  build:
    if: ${{ inputs.target != '' && inputs.arch != 'native' }}
-    needs: [version, find-targets]
+    needs: [version]
    uses: ./.github/workflows/build_firmware.yml
    with:
      version: ${{ needs.version.outputs.long }}
      pio_env: ${{ inputs.target }}
-      platform: ${{ needs.find-targets.outputs.arch }}
+      platform: ${{ inputs.arch }}

  gather-artifacts:
    permissions:
-      contents: read
+      contents: write
      pull-requests: write
    runs-on: ubuntu-latest
    needs: [version, build]
@@ -112,7 +98,7 @@ jobs:
          ref: ${{github.event.pull_request.head.ref}}
          repository: ${{github.event.pull_request.head.repo.full_name}}

-      - uses: actions/download-artifact@v8
+      - uses: actions/download-artifact@v7
        with:
          path: ./
          pattern: firmware-*-*
@@ -125,7 +111,7 @@ jobs:
        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat

      - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        with:
          name: firmware-${{inputs.target}}-${{ needs.version.outputs.long }}
          overwrite: true
@@ -141,7 +127,7 @@ jobs:
            ./Meshtastic_nRF52_factory_erase*.uf2
          retention-days: 30

-      - uses: actions/download-artifact@v8
+      - uses: actions/download-artifact@v7
        with:
          pattern: firmware-*-${{ needs.version.outputs.long }}
          merge-multiple: true
@@ -160,7 +146,7 @@ jobs:
        run: zip -j -9 -r ./firmware-${{inputs.target}}-${{ needs.version.outputs.long }}.zip ./output

      - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        with:
          name: debug-elfs-${{inputs.target}}-${{ needs.version.outputs.long }}.zip
          overwrite: true
@@ -5,7 +5,7 @@ on:
  workflow_dispatch:
  push:
    branches:
-      - develop # Default branch, same as 'cron' above
+      - master
    paths:
      - debian/**
      - "*.rpkg"
@@ -16,7 +16,7 @@ on:
      - .github/workflows/hook_copr.yml

 permissions:
-  contents: read
+  contents: write
  packages: write

 jobs:
@@ -35,8 +35,8 @@ jobs:
        series:
          - jammy # 22.04 LTS
          - noble # 24.04 LTS
+          - plucky # 25.04
          - questing # 25.10
-          - resolute # 26.04 LTS
    uses: ./.github/workflows/package_ppa.yml
    with:
      ppa_repo: ppa:meshtastic/daily
@@ -37,7 +37,7 @@ on:
        value: ${{ jobs.docker-build.outputs.digest }}

 permissions:
-  contents: read
+  contents: write
  packages: write

 jobs:
@@ -50,6 +50,8 @@ jobs:
        uses: actions/checkout@v6
        with:
          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}

      - name: Get release version string
        run: |
@@ -58,16 +60,16 @@ jobs:

      - name: Docker login
        if: ${{ inputs.push }}
-        uses: docker/login-action@v4
+        uses: docker/login-action@v3
        with:
          username: meshtastic
          password: ${{ secrets.DOCKER_FIRMWARE_TOKEN }}

      - name: Set up QEMU
-        uses: docker/setup-qemu-action@v4
+        uses: docker/setup-qemu-action@v3

      - name: Docker setup
-        uses: docker/setup-buildx-action@v4
+        uses: docker/setup-buildx-action@v3

      - name: Sanitize platform string
        id: sanitize_platform
@@ -76,7 +78,7 @@ jobs:

      - name: Docker tag
        id: meta
-        uses: docker/metadata-action@v6
+        uses: docker/metadata-action@v5
        with:
          images: meshtastic/meshtasticd
          tags: |
@@ -84,7 +86,7 @@ jobs:
          flavor: latest=false

      - name: Docker build and push
-        uses: docker/build-push-action@v7
+        uses: docker/build-push-action@v6
        id: docker_variant
        with:
          context: .
@@ -12,7 +12,7 @@ on:
        type: string

 permissions:
-  contents: read
+  contents: write
  packages: write

 jobs:
@@ -86,6 +86,8 @@ jobs:
        uses: actions/checkout@v6
        with:
          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}

      - name: Get release version string
        run: |
@@ -137,14 +139,14 @@ jobs:
        id: tags

      - name: Docker login
-        uses: docker/login-action@v4
+        uses: docker/login-action@v3
        with:
          username: meshtastic
          password: ${{ secrets.DOCKER_FIRMWARE_TOKEN }}

      - name: Docker meta (Debian)
        id: meta_debian
-        uses: docker/metadata-action@v6
+        uses: docker/metadata-action@v5
        with:
          images: meshtastic/meshtasticd
          tags: |
@@ -165,7 +167,7 @@ jobs:

      - name: Docker meta (Alpine)
        id: meta_alpine
-        uses: docker/metadata-action@v6
+        uses: docker/metadata-action@v5
        with:
          images: meshtastic/meshtasticd
          tags: |
@@ -11,7 +11,8 @@ on:
        type: string

 permissions:
-  contents: read
+  contents: write
+  packages: write

 jobs:
  build-copr-hook:
@@ -21,6 +22,8 @@ jobs:
        uses: actions/checkout@v6
        with:
          submodules: recursive
+          ref: ${{ github.ref }}
+          repository: ${{ github.repository }}

      - name: Trigger COPR build
        uses: vidplace7/copr-build@main
@@ -15,7 +15,8 @@ on:
      - "**.md"
      - version.properties

-  pull_request:
+  # Note: This is different from "pull_request". Need to specify ref when doing checkouts.
+  pull_request_target:
    branches:
      - master
      - develop
@@ -28,8 +29,6 @@ on:

  workflow_dispatch:

-permissions: read-all
-
 jobs:
  setup:
    strategy:
@@ -89,6 +88,8 @@ jobs:
      - uses: actions/checkout@v6
        with:
          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
      - name: Check ${{ matrix.check.board }}
        uses: meshtastic/gh-action-firmware@main
        with:
@@ -125,16 +126,9 @@ jobs:

  test-native:
    if: ${{ !contains(github.ref_name, 'event/') && github.repository == 'meshtastic/firmware' }}
-    permissions: # Needed for dorny/test-reporter.
-      contents: read
-      actions: read
-      checks: write
    uses: ./.github/workflows/test_native.yml

  docker:
-    permissions: # Needed for pushing to GHCR.
-      contents: read
-      packages: write
    strategy:
      fail-fast: false
      matrix:
@@ -159,6 +153,9 @@ jobs:
  gather-artifacts:
    # trunk-ignore(checkov/CKV2_GHA_1)
    if: github.repository == 'meshtastic/firmware'
+    permissions:
+      contents: write
+      pull-requests: write
    strategy:
      fail-fast: false
      matrix:
@@ -176,8 +173,11 @@ jobs:
    steps:
      - name: Checkout code
        uses: actions/checkout@v6
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}

-      - uses: actions/download-artifact@v8
+      - uses: actions/download-artifact@v7
        with:
          path: ./
          pattern: firmware-${{matrix.arch}}-*
@@ -187,7 +187,7 @@ jobs:
        run: ls -R

      - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        with:
          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
          overwrite: true
@@ -205,7 +205,7 @@ jobs:
            ./Meshtastic_nRF52_factory_erase*.uf2
          retention-days: 30

-      - uses: actions/download-artifact@v8
+      - uses: actions/download-artifact@v7
        with:
          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
          merge-multiple: true
@@ -224,13 +224,20 @@ jobs:
        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output

      - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        with:
          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
          overwrite: true
          path: ./*.elf
          retention-days: 30

+      - uses: scruplelesswizard/comment-artifact@main
+        if: ${{ github.event_name == 'pull_request' }}
+        with:
+          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          description: "Download firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
+          github-token: ${{ secrets.GITHUB_TOKEN }}
+
  shame:
    if: github.repository == 'meshtastic/firmware'
    continue-on-error: true
@@ -238,44 +245,42 @@ jobs:
    needs: [build]
    steps:
      - uses: actions/checkout@v6
-        if: github.event_name == 'pull_request'
+        if: github.event_name == 'pull_request_target'
        with:
          filter: blob:none # means we download all the git history but none of the commit (except ones with checkout like the head)
          fetch-depth: 0
      - name: Download the current manifests
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
        with:
          path: ./manifests-new/
          pattern: manifest-*
          merge-multiple: true
      - name: Upload combined manifests for later commit and global stats crunching.
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        id: upload-manifest
        with:
          name: manifests-${{ github.sha }}
          overwrite: true
          path: manifests-new/*.mt.json
      - name: Find the merge base
-        if: github.event_name == 'pull_request'
+        if: github.event_name == 'pull_request_target'
        run: echo "MERGE_BASE=$(git merge-base "origin/$base" "$head")" >> $GITHUB_ENV
        env:
          base: ${{ github.base_ref }}
          head: ${{ github.sha }}
      # Currently broken (for-loop through EVERY artifact -- rate limiting)
      # - name: Download the old manifests
-      #   if: github.event_name == 'pull_request'
+      #   if: github.event_name == 'pull_request_target'
      #   run: gh run download -R "$repo" --name "manifests-$merge_base" --dir manifest-old/
      #   env:
      #     GH_TOKEN: ${{ github.token }}
      #     merge_base: ${{ env.MERGE_BASE }}
      #     repo: ${{ github.repository }}
      # - name: Do scan and post comment
-      #   if: github.event_name == 'pull_request'
+      #   if: github.event_name == 'pull_request_target'
      #   run: python3 bin/shame.py ${{ github.event.pull_request.number }} manifests-old/ manifests-new/

  release-artifacts:
-    permissions: # Needed for 'gh release upload'.
-      contents: write
    runs-on: ubuntu-latest
    if: ${{ github.event_name == 'workflow_dispatch' && github.repository == 'meshtastic/firmware' }}
    outputs:
@@ -319,14 +324,14 @@ jobs:
          body: ${{ steps.release_notes.outputs.notes }}

      - name: Download source deb
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
        with:
          pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
          merge-multiple: true
          path: ./output/debian-src

      - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
        with:
          pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
          merge-multiple: true
@@ -350,7 +355,7 @@ jobs:
          }' > firmware-${{ needs.version.outputs.long }}.json

      - name: Save Release manifest artifact
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        with:
          name: manifest-${{ needs.version.outputs.long }}
          overwrite: true
@@ -367,8 +372,6 @@ jobs:
          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}

  release-firmware:
-    permissions: # Needed for 'gh release upload'.
-      contents: write
    strategy:
      fail-fast: false
      matrix:
@@ -393,7 +396,7 @@ jobs:
        with:
          python-version: 3.x

-      - uses: actions/download-artifact@v8
+      - uses: actions/download-artifact@v7
        with:
          pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
          merge-multiple: true
@@ -410,7 +413,7 @@ jobs:
      - name: Zip firmware
        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output

-      - uses: actions/download-artifact@v8
+      - uses: actions/download-artifact@v7
        with:
          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
          merge-multiple: true
@@ -451,14 +454,14 @@ jobs:
          python-version: 3.x

      - name: Get firmware artifacts
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
        with:
          pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
          merge-multiple: true
          path: ./publish

      - name: Get manifest artifact
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
        with:
          pattern: manifest-${{ needs.version.outputs.long }}
          path: ./publish
@@ -0,0 +1,371 @@
+name: Merge Queue
+# Not sure how concurrency works in merge_queue, removing for now.
+# concurrency:
+#   group: merge-queue-${{ github.head_ref || github.run_id }}
+#   cancel-in-progress: true
+on:
+  # Merge group is a special trigger that is used to trigger the workflow when a merge group is created.
+  merge_group:
+
+jobs:
+  setup:
+    strategy:
+      fail-fast: true
+      matrix:
+        arch:
+          - all
+          - check
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v6
+      - uses: actions/setup-python@v6
+        with:
+          python-version: 3.x
+          cache: pip
+      - run: pip install -U platformio
+      - name: Generate matrix
+        id: jsonStep
+        run: |
+          if [[ "$GITHUB_HEAD_REF" == "" ]]; then
+            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
+          else  
+            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} --level pr)
+          fi
+          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF"
+          echo "${{matrix.arch}}=$TARGETS" >> $GITHUB_OUTPUT
+    outputs:
+      all: ${{ steps.jsonStep.outputs.all }}
+      check: ${{ steps.jsonStep.outputs.check }}
+
+  version:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v6
+      - name: Get release version string
+        run: |
+          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
+        id: version
+        env:
+          BUILD_LOCATION: local
+    outputs:
+      long: ${{ steps.version.outputs.long }}
+      deb: ${{ steps.version.outputs.deb }}
+
+  check:
+    needs: setup
+    strategy:
+      fail-fast: true
+      matrix:
+        check: ${{ fromJson(needs.setup.outputs.check) }}
+
+    runs-on: ubuntu-latest
+    if: ${{ github.event_name != 'workflow_dispatch' }}
+    steps:
+      - uses: actions/checkout@v6
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
+      - name: Check ${{ matrix.check.board }}
+        run: bin/check-all.sh ${{ matrix.check.board }}
+
+  build:
+    needs: [setup, version]
+    strategy:
+      matrix:
+        build: ${{ fromJson(needs.setup.outputs.all) }}
+    uses: ./.github/workflows/build_firmware.yml
+    with:
+      version: ${{ needs.version.outputs.long }}
+      pio_env: ${{ matrix.build.board }}
+      platform: ${{ matrix.build.platform }}
+
+  build-debian-src:
+    if: github.repository == 'meshtastic/firmware'
+    uses: ./.github/workflows/build_debian_src.yml
+    with:
+      series: UNRELEASED
+      build_location: local
+    secrets: inherit
+
+  package-pio-deps-native-tft:
+    if: ${{ github.event_name == 'workflow_dispatch' }}
+    uses: ./.github/workflows/package_pio_deps.yml
+    with:
+      pio_env: native-tft
+    secrets: inherit
+
+  test-native:
+    if: ${{ !contains(github.ref_name, 'event/') }}
+    uses: ./.github/workflows/test_native.yml
+
+  docker:
+    strategy:
+      fail-fast: false
+      matrix:
+        distro: [debian, alpine]
+        platform: [linux/amd64, linux/arm64, linux/arm/v7]
+        pio_env: [native, native-tft]
+        exclude:
+          - distro: alpine
+            platform: linux/arm/v7
+          - pio_env: native-tft
+            platform: linux/arm64
+          - pio_env: native-tft
+            platform: linux/arm/v7
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: ${{ matrix.distro }}
+      platform: ${{ matrix.platform }}
+      runs-on: ${{ contains(matrix.platform, 'arm') && 'ubuntu-24.04-arm' || 'ubuntu-24.04' }}
+      pio_env: ${{ matrix.pio_env }}
+      push: false
+
+  gather-artifacts:
+    # trunk-ignore(checkov/CKV2_GHA_1)
+    permissions:
+      contents: write
+      pull-requests: write
+    strategy:
+      fail-fast: false
+      matrix:
+        arch:
+          - esp32
+          - esp32s3
+          - esp32c3
+          - esp32c6
+          - nrf52840
+          - rp2040
+          - rp2350
+          - stm32
+    runs-on: ubuntu-latest
+    needs: [version, build]
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v6
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - uses: actions/download-artifact@v7
+        with:
+          path: ./
+          pattern: firmware-${{matrix.arch}}-*
+          merge-multiple: true
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
+      - name: Move files up
+        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
+
+      - name: Repackage in single firmware zip
+        uses: actions/upload-artifact@v6
+        with:
+          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          overwrite: true
+          path: |
+            ./firmware-*.bin
+            ./firmware-*.uf2
+            ./firmware-*.hex
+            ./firmware-*.zip
+            ./device-*.sh
+            ./device-*.bat
+            ./littlefs-*.bin
+            ./bleota*bin
+            ./Meshtastic_nRF52_factory_erase*.uf2
+          retention-days: 30
+
+      - uses: actions/download-artifact@v7
+        with:
+          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          merge-multiple: true
+          path: ./output
+
+      # For diagnostics
+      - name: Show artifacts
+        run: ls -lR
+
+      - name: Device scripts permissions
+        run: |
+          chmod +x ./output/device-install.sh || true
+          chmod +x ./output/device-update.sh || true
+
+      - name: Zip firmware
+        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
+
+      - name: Repackage in single elfs zip
+        uses: actions/upload-artifact@v6
+        with:
+          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          overwrite: true
+          path: ./*.elf
+          retention-days: 30
+
+      - uses: scruplelesswizard/comment-artifact@main
+        if: ${{ github.event_name == 'pull_request' }}
+        with:
+          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          description: "Download firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
+          github-token: ${{ secrets.GITHUB_TOKEN }}
+
+  release-artifacts:
+    runs-on: ubuntu-latest
+    if: ${{ github.event_name == 'workflow_dispatch' }}
+    outputs:
+      upload_url: ${{ steps.create_release.outputs.upload_url }}
+    needs:
+      - version
+      - gather-artifacts
+      - build-debian-src
+      - package-pio-deps-native-tft
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v6
+
+      - name: Create release
+        uses: softprops/action-gh-release@v2
+        id: create_release
+        with:
+          draft: true
+          prerelease: true
+          name: Meshtastic Firmware ${{ needs.version.outputs.long }} Alpha
+          tag_name: v${{ needs.version.outputs.long }}
+          body: |
+            Autogenerated by github action, developer should edit as required before publishing...
+
+      - name: Download source deb
+        uses: actions/download-artifact@v7
+        with:
+          pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
+          merge-multiple: true
+          path: ./output/debian-src
+
+      - name: Download `native-tft` pio deps
+        uses: actions/download-artifact@v7
+        with:
+          pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
+          merge-multiple: true
+          path: ./output/pio-deps-native-tft
+
+      - name: Zip Linux sources
+        working-directory: output
+        run: |
+          zip -j -9 -r ./meshtasticd-${{ needs.version.outputs.deb }}-src.zip ./debian-src
+          zip -9 -r ./platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip ./pio-deps-native-tft
+
+      # For diagnostics
+      - name: Display structure of downloaded files
+        run: ls -lR
+
+      - name: Add Linux sources to GtiHub Release
+        # Only run when targeting master branch with workflow_dispatch
+        if: ${{ github.ref_name == 'master' }}
+        run: |
+          gh release upload v${{ needs.version.outputs.long }} ./output/meshtasticd-${{ needs.version.outputs.deb }}-src.zip
+          gh release upload v${{ needs.version.outputs.long }} ./output/platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+
+  release-firmware:
+    strategy:
+      fail-fast: false
+      matrix:
+        arch:
+          - esp32
+          - esp32s3
+          - esp32c3
+          - esp32c6
+          - nrf52840
+          - rp2040
+          - rp2350
+          - stm32
+    runs-on: ubuntu-latest
+    if: ${{ github.event_name == 'workflow_dispatch' }}
+    needs: [release-artifacts, version]
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v6
+
+      - name: Setup Python
+        uses: actions/setup-python@v6
+        with:
+          python-version: 3.x
+
+      - uses: actions/download-artifact@v7
+        with:
+          pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          merge-multiple: true
+          path: ./output
+
+      - name: Display structure of downloaded files
+        run: ls -lR
+
+      - name: Device scripts permissions
+        run: |
+          chmod +x ./output/device-install.sh || true
+          chmod +x ./output/device-update.sh || true
+
+      - name: Zip firmware
+        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
+
+      - uses: actions/download-artifact@v7
+        with:
+          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          merge-multiple: true
+          path: ./elfs
+
+      - name: Zip debug elfs
+        run: zip -j -9 -r ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./elfs
+
+      # For diagnostics
+      - name: Display structure of downloaded files
+        run: ls -lR
+
+      - name: Add bins and debug elfs to GitHub Release
+        # Only run when targeting master branch with workflow_dispatch
+        if: ${{ github.ref_name == 'master' }}
+        run: |
+          gh release upload v${{ needs.version.outputs.long }} ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
+          gh release upload v${{ needs.version.outputs.long }} ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+
+  publish-firmware:
+    runs-on: ubuntu-24.04
+    if: ${{ github.event_name == 'workflow_dispatch' }}
+    needs: [release-firmware, version]
+    env:
+      targets: |-
+        esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v6
+
+      - name: Setup Python
+        uses: actions/setup-python@v6
+        with:
+          python-version: 3.x
+
+      - uses: actions/download-artifact@v7
+        with:
+          pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
+          merge-multiple: true
+          path: ./publish
+
+      - name: Publish firmware to meshtastic.github.io
+        uses: peaceiris/actions-gh-pages@v4
+        env:
+          # On event/* branches, use the event name as the destination prefix
+          DEST_PREFIX: ${{ contains(github.ref_name, 'event/') && format('{0}/', github.ref_name) || '' }}
+        with:
+          deploy_key: ${{ secrets.DIST_PAGES_DEPLOY_KEY }}
+          external_repository: meshtastic/meshtastic.github.io
+          publish_branch: master
+          publish_dir: ./publish
+          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ needs.version.outputs.long }}
+          keep_files: true
+          user_name: github-actions[bot]
+          user_email: github-actions[bot]@users.noreply.github.com
+          commit_message: ${{ needs.version.outputs.long }}
+          enable_jekyll: true
@@ -18,7 +18,8 @@ on:
        type: string

 permissions:
-  contents: read
+  contents: write
+  packages: write

 jobs:
  build-debian-src:
@@ -57,7 +58,7 @@ jobs:
        id: version

      - name: Download artifacts
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
        with:
          name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
          merge-multiple: true
@@ -16,7 +16,8 @@ on:
        type: string

 permissions:
-  contents: read
+  contents: write
+  packages: write

 jobs:
  pkg-pio-libdeps:
@@ -26,6 +27,8 @@ jobs:
        uses: actions/checkout@v6
        with:
          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}

      - name: Setup Python
        uses: actions/setup-python@v6
@@ -51,19 +54,9 @@ jobs:
          PLATFORMIO_LIBDEPS_DIR: pio/libdeps
          PLATFORMIO_PACKAGES_DIR: pio/packages
          PLATFORMIO_CORE_DIR: pio/core
-          PLATFORMIO_SETTING_ENABLE_TELEMETRY: 0
-          PLATFORMIO_SETTING_CHECK_PLATFORMIO_INTERVAL: 3650
-          PLATFORMIO_SETTING_CHECK_PRUNE_SYSTEM_THRESHOLD: 10240
-
-      - name: Mangle platformio cache
-        # Add "1" to epoch-timestamps of all downloads in the cache.
-        # This is a hack to prevent internet access at build-time.
-        run: |
-          cp pio/core/.cache/downloads/usage.db pio/core/.cache/downloads/usage.db.bak
-          jq -c 'with_entries(.value |= (. | tostring + "1" | tonumber))' pio/core/.cache/downloads/usage.db.bak > pio/core/.cache/downloads/usage.db

      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        with:
          name: platformio-deps-${{ inputs.pio_env }}-${{ steps.version.outputs.long }}
          overwrite: true
@@ -16,7 +16,8 @@ on:
        type: string

 permissions:
-  contents: read
+  contents: write
+  packages: write

 jobs:
  build-debian-src:
@@ -35,6 +36,8 @@ jobs:
        with:
          submodules: recursive
          path: meshtasticd
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}

      - name: Install deps
        shell: bash
@@ -43,7 +46,7 @@ jobs:
          sudo apt-get install -y dput

      - name: Import GPG key
-        uses: crazy-max/ghaction-import-gpg@v7
+        uses: crazy-max/ghaction-import-gpg@v6
        with:
          gpg_private_key: ${{ secrets.PPA_GPG_PRIVATE_KEY }}
        id: gpg
@@ -57,7 +60,7 @@ jobs:
        id: version

      - name: Download artifacts
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
        with:
          name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
          merge-multiple: true
@@ -67,6 +70,5 @@ jobs:

      - name: Publish with dput
        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
-        timeout-minutes: 15 # dput is terrible, sometimes runs 'forever'
        run: |
          dput ${{ inputs.ppa_repo }} meshtasticd_${{ steps.version.outputs.deb }}~${{ inputs.series }}_source.changes
@@ -50,7 +50,7 @@ jobs:

      - name: Download test artifacts
        if: needs.native-tests.result != 'skipped'
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
        with:
          name: platformio-test-report-${{ steps.version.outputs.long }}
          merge-multiple: true
@@ -23,8 +23,8 @@ jobs:
        series:
          - jammy # 22.04 LTS
          - noble # 24.04 LTS
+          - plucky # 25.04
          - questing # 25.10
-          - resolute # 26.04 LTS
    uses: ./.github/workflows/package_ppa.yml
    with:
      ppa_repo: |-
@@ -33,7 +33,7 @@ jobs:

      # step 3
      - name: save report as pipeline artifact
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        with:
          name: report.sarif
          overwrite: true
@@ -17,7 +17,7 @@ jobs:

    steps:
      - name: Stale PR+Issues
-        uses: actions/stale@v10.2.0
+        uses: actions/stale@v10.1.1
        with:
          days-before-stale: 45
          stale-issue-message: This issue has not had any comment or update in the last month. If it is still relevant, please post update comments. If no comments are made, this issue will be closed automagically in 7 days.
@@ -16,6 +16,8 @@ jobs:
    steps:
      - uses: actions/checkout@v6
        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
          submodules: recursive

      - name: Setup native build
@@ -57,7 +59,7 @@ jobs:
        id: version

      - name: Save coverage information
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        if: always() # run this step even if previous step failed
        with:
          name: lcov-coverage-info-native-simulator-test-${{ steps.version.outputs.long }}
@@ -70,6 +72,8 @@ jobs:
    steps:
      - uses: actions/checkout@v6
        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
          submodules: recursive

      - name: Setup native build
@@ -90,7 +94,7 @@ jobs:

      - name: Save test results
        if: always() # run this step even if previous step failed
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        with:
          name: platformio-test-report-${{ steps.version.outputs.long }}
          overwrite: true
@@ -104,7 +108,7 @@ jobs:
          sed -i -e "s#${PWD}#.#" coverage_tests.info # Make paths relative.

      - name: Save coverage information
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        if: always() # run this step even if previous step failed
        with:
          name: lcov-coverage-info-native-platformio-tests-${{ steps.version.outputs.long }}
@@ -124,26 +128,29 @@ jobs:
    if: always()
    steps:
      - uses: actions/checkout@v6
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}

      - name: Get release version string
        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
        id: version

      - name: Download test artifacts
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
        with:
          name: platformio-test-report-${{ steps.version.outputs.long }}
          merge-multiple: true

      - name: Test Report
-        uses: dorny/test-reporter@v3.0.0
+        uses: dorny/test-reporter@v2.5.0
        with:
          name: PlatformIO Tests
          path: testreport.xml
          reporter: java-junit

      - name: Download coverage artifacts
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
        with:
          pattern: lcov-coverage-info-native-*-${{ steps.version.outputs.long }}
          path: code-coverage-report
@@ -156,7 +163,7 @@ jobs:
          genhtml --quiet --legend --prefix "${PWD}" code-coverage-report/coverage_src.info --output-directory code-coverage-report

      - name: Save Code Coverage Report
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        with:
          name: code-coverage-report-${{ steps.version.outputs.long }}
          path: code-coverage-report
@@ -52,7 +52,7 @@ jobs:
          node-version: 24

      - name: Setup pnpm
-        uses: pnpm/action-setup@v5
+        uses: pnpm/action-setup@v4
        with:
          version: latest

@@ -6,7 +6,7 @@ permissions: read-all
 jobs:
  update-protobufs:
    runs-on: ubuntu-latest
-    permissions: # Needed for peter-evans/create-pull-request.
+    permissions:
      contents: write
      pull-requests: write
    steps:
@@ -33,7 +33,6 @@ __pycache__
 *~

 venv/
-.venv/
 release/
 .vscode/extensions.json
 /compile_commands.json
@@ -4,31 +4,31 @@ cli:
 plugins:
  sources:
    - id: trunk
-      ref: v1.7.6
+      ref: v1.7.4
      uri: https://github.com/trunk-io/plugins
 lint:
  enabled:
-    - checkov@3.2.513
-    - renovate@43.100.0
+    - checkov@3.2.500
+    - renovate@43.4.0
    - prettier@3.8.1
-    - trufflehog@3.94.1
+    - trufflehog@3.93.0
    - yamllint@1.38.0
-    - bandit@1.9.4
-    - trivy@0.69.3
+    - bandit@1.9.3
+    - trivy@0.69.1
    - taplo@0.10.0
-    - ruff@0.15.8
-    - isort@8.0.1
-    - markdownlint@0.48.0
+    - ruff@0.15.0
+    - isort@7.0.0
+    - markdownlint@0.47.0
    - oxipng@10.1.0
-    - svgo@4.0.1
-    - actionlint@1.7.11
+    - svgo@4.0.0
+    - actionlint@1.7.10
    - flake8@7.3.0
    - hadolint@2.14.0
    - shfmt@3.6.0
    - shellcheck@0.11.0
-    - black@26.3.1
+    - black@26.1.0
    - git-diff-check
-    - gitleaks@8.30.1
+    - gitleaks@8.30.0
    - clang-format@16.0.3
  ignore:
    - linters: [ALL]
@@ -14,7 +14,7 @@ RUN apt-get update && apt-get install --no-install-recommends -y \
        curl wget g++ zip git ca-certificates pkg-config \
        libgpiod-dev libyaml-cpp-dev libbluetooth-dev libi2c-dev libuv1-dev \
        libusb-1.0-0-dev libulfius-dev liborcania-dev libssl-dev \
-        libx11-dev libinput-dev libxkbcommon-x11-dev libsqlite3-dev libsdl2-dev \
+        libx11-dev libinput-dev libxkbcommon-x11-dev libsqlite3-dev \
    && apt-get clean && rm -rf /var/lib/apt/lists/* \
    && pip install --no-cache-dir -U platformio \
    && mkdir /tmp/firmware
@@ -53,7 +53,7 @@ USER root
 RUN apt-get update && apt-get --no-install-recommends -y install \
        libc-bin libc6 libgpiod3 libyaml-cpp0.8 libi2c0 libuv1t64 libusb-1.0-0-dev \
        liborcania2.3 libulfius2.7t64 libssl3t64 \
-        libx11-6 libinput10 libxkbcommon-x11-0 libsdl2-2.0-0 \
+        libx11-6 libinput10 libxkbcommon-x11-0 \
    && apt-get clean && rm -rf /var/lib/apt/lists/* \
    && mkdir -p /var/lib/meshtasticd \
    && mkdir -p /etc/meshtasticd/config.d \
@@ -1,26 +0,0 @@
-# Lightweight container for running native PlatformIO tests on non-Linux hosts
-FROM python:3.14-slim-trixie
-
-ENV DEBIAN_FRONTEND=noninteractive
-ENV PIP_ROOT_USER_ACTION=ignore
-
-# hadolint ignore=DL3008
-RUN apt-get update && apt-get install --no-install-recommends -y \
-        g++ git ca-certificates pkg-config \
-        libgpiod-dev libyaml-cpp-dev libbluetooth-dev libi2c-dev libuv1-dev \
-        libusb-1.0-0-dev libulfius-dev liborcania-dev libssl-dev \
-        libx11-dev libinput-dev libxkbcommon-x11-dev libsqlite3-dev libsdl2-dev \
-    && apt-get clean && rm -rf /var/lib/apt/lists/* \
-    && pip install --no-cache-dir platformio==6.1.19 \
-        && useradd --create-home --shell /usr/sbin/nologin meshtastic
-
-WORKDIR /firmware
-RUN chown -R meshtastic:meshtastic /firmware
-
-HEALTHCHECK --interval=30s --timeout=5s --start-period=10s --retries=3 \
-    CMD platformio --version || exit 1
-
-USER meshtastic
-
-# Run tests by default; override with docker run args for specific filters
-CMD ["platformio", "test", "-e", "coverage", "-v"]
@@ -11,7 +11,7 @@ RUN apk --no-cache add \
        bash g++ libstdc++-dev linux-headers zip git ca-certificates libbsd-dev \
        libgpiod-dev yaml-cpp-dev bluez-dev \
        libusb-dev i2c-tools-dev libuv-dev openssl-dev pkgconf argp-standalone \
-        libx11-dev libinput-dev libxkbcommon-dev sqlite-dev sdl2-dev \
+        libx11-dev libinput-dev libxkbcommon-dev sqlite-dev \
    && rm -rf /var/cache/apk/* \
    && pip install --no-cache-dir -U platformio \
    && mkdir /tmp/firmware
@@ -42,7 +42,7 @@ USER root

 RUN apk --no-cache add \
        shadow libstdc++ libbsd libgpiod yaml-cpp libusb \
-        i2c-tools libuv libx11 libinput libxkbcommon sdl2 \
+        i2c-tools libuv libx11 libinput libxkbcommon \
    && rm -rf /var/cache/apk/* \
    && mkdir -p /var/lib/meshtasticd \
    && mkdir -p /etc/meshtasticd/config.d \
@@ -23,4 +23,4 @@ for BOARD in $BOARDS; do
 	CHECK="${CHECK} -e ${BOARD}"
 done

-pio check --flags "-DAPP_VERSION=${APP_VERSION} --suppressions-list=suppressions.txt --inline-suppr" $CHECK --skip-packages --pattern="src/" --fail-on-defect=low --fail-on-defect=medium --fail-on-defect=high
+pio check --flags "-DAPP_VERSION=${APP_VERSION} --suppressions-list=suppressions.txt --inline-suppr" $CHECK --skip-packages --pattern="src/" --fail-on-defect=medium --fail-on-defect=high
@@ -187,7 +187,6 @@ Logging:
  LogLevel: info # debug, info, warn, error
 #  TraceFile: /var/log/meshtasticd.json
 #  JSONFile: /packets.json # File location for JSON output of decoded packets
-#  JSONFileRotate: 60 # Rotate JSON file every N minutes, or 0 for no rotation
 #  JSONFilter: position # filter for packets to save to JSON file
 #  AsciiLogs: true     # default if not specified is !isatty() on stdout

@@ -215,4 +214,3 @@ General:
  AvailableDirectory: /etc/meshtasticd/available.d/
 #  MACAddress: AA:BB:CC:DD:EE:FF
 #  MACAddressSource: eth0
-#  APIPort: 4403
@@ -1,9 +1,3 @@
-Meta:
-  name: BananaPi-BPI-R4-sx1262
-  support: community
-  compatible:
-    - bananapi_bpi-r4 # OpenWrt target
-
 Lora:
  Module: sx1262  # BananaPi-BPI-R4 SPI via 26p GPIO Header
 ##  CS: 28
@@ -1,10 +1,4 @@
 ##  https://www.mikroe.com/lr-iot-click
-Meta:
-  name: OpenWRT One mikroBUS LR-IOT-CLICK
-  support: community
-  compatible:
-    - openwrt_one # OpenWrt target
-
 Lora:
  Module: lr1110  # OpenWRT ONE mikroBUS with LR-IOT-CLICK
 #  CS: 25
@@ -1,9 +1,3 @@
-Meta:
-  name: OpenWRT One mikroBUS sx1262
-  support: community
-  compatible:
-    - openwrt_one # OpenWrt target
-
 Lora:
  Module: sx1262
  IRQ: 10
@@ -1,28 +0,0 @@
-# meshtasticd configuration files
-
-This directory contains YAML configuration files for meshtasticd. Each file describes a specific hardware configuration, including the LoRa module and pin assignments. These configurations are used by meshtasticd to correctly interface with the hardware.
-
-## Metadata structure
-
-Each configuration file includes a `Meta` section that provides information about the configuration.
-This configuration is consumed by configuration-selection tools.
-
-```yaml
-Meta:
-  name: MeshAdv-Pi E22-900M30S # A unique identifier for this configuration.
-  support: community # community, official, or deprecated; determined by Meshtastic Leads.
-  compatible: # A list of compatible products or platforms.
-    - raspberry-pi
-```
-`name`: A unique identifier for the configuration, typically reflecting the hardware it supports.
-
-`support`: Indicates the level of support for this configuration. It can be one of the following:
-
- `community`: Supported by the Meshtastic community. Meshtastic Members may not possess, or have not tested this configuration.
- `official`: Fully supported by Meshtastic. Meshtastic Members have tested and verified this configuration.
- `deprecated`: No longer recommended for deployment by Meshtastic.
-
-`compatible`: A list of compatible products or platforms that can use this configuration.
-This will vary depending on the intended use case / platform.
-Multiple compatible entries can be included. E.g. Armbian `BOARD` value or OpenWrt `TARGET` value.
-These tags can be consumed by different configuration-selection tools, filtering based upon their platform/etc.
@@ -1,9 +1,3 @@
-Meta:
-  name: Waveshare 1.44inch LCD HAT
-  support: community
-  compatible:
-    - raspberry-pi
-
 ### Waveshare 1.44inch LCD HAT
 Display:
  Panel: ST7735S
@@ -1,9 +1,3 @@
-Meta:
-  name: Waveshare 2.8inch LCD HAT
-  support: community
-  compatible:
-    - raspberry-pi
-
 Display:

 ### Waveshare 2.8inch RPi LCD
@@ -1,30 +0,0 @@
---
-Lora:
-## Ebyte E80-900M22S
-## This is a bit experimental
-## 
-##
-  Module: lr1121
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO3_TCXO_VOLTAGE: 1.8
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1
-
-
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
-  
-rfswitch_table:
-  pins: [DIO5, DIO6, DIO7]
-  MODE_STBY: [LOW, LOW, LOW]
-  MODE_RX: [LOW, HIGH, LOW]
-  MODE_TX: [HIGH, HIGH, LOW]
-  MODE_TX_HP: [HIGH, LOW, LOW]
-  MODE_TX_HF: [LOW, LOW, LOW]
-  MODE_GNSS: [LOW, LOW, HIGH]
-  MODE_WIFI: [LOW, LOW, LOW]
-
-General:
-  MACAddressSource: eth0
@@ -1,46 +0,0 @@
---
-Lora:
-## Ebyte E80-900M22S
-## This is a bit experimental
-## 
-##
-  Module: lr1121
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO3_TCXO_VOLTAGE: 1.8
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1
-
-
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
-  
-rfswitch_table:
-  pins:
-    - DIO5
-    - DIO6
-  MODE_STBY:
-    - LOW
-    - LOW
-  MODE_RX:
-    - HIGH
-    - LOW
-  MODE_TX:
-    - HIGH
-    - HIGH
-  MODE_TX_HP:
-    - LOW
-    - HIGH
-  MODE_TX_HF:
-    - LOW
-    - LOW
-  MODE_GNSS:
-    - LOW
-    - LOW
-  MODE_WIFI:
-    - LOW
-    - LOW
-
-General:
-  MACAddressSource: eth0
@@ -1,22 +1,20 @@
---
-Meta:
-  name: Femtofox Ebyte E80-900M22S with TCXO
-  support: community
-  compatible:
-    - luckfox-pico-mini # Armbian
-
-Lora:
-## Ebyte E80-900M22S
-## This is a bit experimental
-## 
-##
-  Module: lr1121
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO3_TCXO_VOLTAGE: 1.8
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1
-
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
+---
+Lora:
+## Ebyte E80-900M22S
+## This is a bit experimental
+## 
+##
+  Module: lr1121
+  gpiochip: 1 # subtract 32 from the gpio numbers
+  DIO3_TCXO_VOLTAGE: 1.8
+  CS: 16 #pin6 / GPIO48 1C0
+  IRQ: 23  #pin17 / GPIO55 1C7
+  Busy: 22 #pin16 / GPIO54 1C6
+  Reset: 25 #pin13 / GPIO57 1D1
+
+
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
+  spiSpeed: 2000000
+  
+General:
+  MACAddressSource: eth0
@@ -1,24 +1,21 @@
---
-Meta:
-  name: Femtofox SX1262 TCXO
-  support: community
-  compatible:
-    - luckfox-pico-mini # Armbian
-
-Lora:
-## Ebyte E22-900M30S, E22-900M22S with or without external RF switching setup
-## HT-RA62 (Has internal switching, but whatever)
-## Seeed WIO SX1262 (already has TXEN-DIO2 link, but needs RXEN)
-## Will work with any module with or without RF switching, and with TCXO
-  Module: sx1262
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1
-  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
-#  TXen: bridge to DIO2 on E22 module
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
+---
+Lora:
+## Ebyte E22-900M30S, E22-900M22S with or without external RF switching setup
+## HT-RA62 (Has internal switching, but whatever)
+## Seeed WIO SX1262 (already has TXEN-DIO2 link, but needs RXEN)
+## Will work with any module with or without RF switching, and with TCXO
+  Module: sx1262
+  gpiochip: 1 # subtract 32 from the gpio numbers
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true
+  CS: 16 #pin6 / GPIO48 1C0
+  IRQ: 23  #pin17 / GPIO55 1C7
+  Busy: 22 #pin16 / GPIO54 1C6
+  Reset: 25 #pin13 / GPIO57 1D1
+  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
+#  TXen: bridge to DIO2 on E22 module
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
+  spiSpeed: 2000000
+  
+General:
+  MACAddressSource: eth0
@@ -1,24 +1,21 @@
---
-Meta:
-  name: Femtofox SX1262 XTAL
-  support: community
-  compatible:
-    - luckfox-pico-mini # Armbian
-
-Lora:
-## Ebyte E22-900MM22S with no external RF switching setup
-## Waveshare SX126X XXXM, AI Thinker RA-01SH
-## Will work with any module with or without RF switching and no TCXO
-
-  Module: sx1262  
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: false
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1 
-  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
-#  TXen: bridge to DIO2 on E22 module
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
+---
+Lora:
+## Ebyte E22-900MM22S with no external RF switching setup
+## Waveshare SX126X XXXM, AI Thinker RA-01SH
+## Will work with any module with or without RF switching and no TCXO
+
+  Module: sx1262  
+  gpiochip: 1 # subtract 32 from the gpio numbers
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: false
+  CS: 16 #pin6 / GPIO48 1C0
+  IRQ: 23  #pin17 / GPIO55 1C7
+  Busy: 22 #pin16 / GPIO54 1C6
+  Reset: 25 #pin13 / GPIO57 1D1 
+  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
+#  TXen: bridge to DIO2 on E22 module
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
+  spiSpeed: 2000000
+
+General:
+  MACAddressSource: eth0
@@ -1,30 +0,0 @@
---
-Lora:
-## Ebyte E80-900M22S
-## This is a bit experimental
-## 
-##
-  Module: lr1121
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO3_TCXO_VOLTAGE: 1.8
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1
-
-
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
-  
-rfswitch_table:
-  pins: [DIO5, DIO6, DIO7]
-  MODE_STBY: [LOW, LOW, LOW]
-  MODE_RX: [LOW, LOW, LOW]
-  MODE_TX: [LOW, HIGH, LOW]
-  MODE_TX_HP: [HIGH, LOW, LOW]
-  # MODE_TX_HF: []
-  # MODE_GNSS: []
-  MODE_WIFI: [LOW, LOW, LOW]
-
-General:
-  MACAddressSource: eth0
@@ -1,9 +1,3 @@
-Meta:
-  name: Adafruit RFM9x
-  support: deprecated
-  compatible:
-    - raspberry-pi
-
 Lora:
  Module: RF95  # Adafruit RFM9x
  Reset: 25
@@ -1,11 +1,5 @@
 # MeshAdv-Pi E22-900M30S
 # https://github.com/chrismyers2000/MeshAdv-Pi-Hat
-Meta:
-  name: MeshAdv-Pi E22-900M30S
-  support: community
-  compatible:
-    - raspberry-pi
-
 Lora:
  Module: sx1262
  CS: 21
@@ -1,11 +1,5 @@
 # MeshAdv Mini E22-900M22S
 # https://github.com/chrismyers2000/MeshAdv-Mini
-Meta:
-  name: MeshAdv Mini E22-900M22S
-  support: community
-  compatible:
-    - raspberry-pi
-
 Lora:
  Module: sx1262  # Ebyte E22-900M22S 
  CS: 8
@@ -1,20 +1,11 @@
-Meta:
-  name: RAK6421 + RAK13300 Slot 1
-  support: official
-  compatible:
-    - raspberry-pi
-
 Lora:

-  ### RAK13300 in Slot 1
+  ### RAK13300in Slot 1
  Module: sx1262
  IRQ: 22 #IO6
  Reset: 16 # IO4
  Busy: 24 # IO5
  # Ant_sw: 13 # IO3 
-  Enable_Pins:
-    - 12
-    - 13
  DIO3_TCXO_VOLTAGE: true
  DIO2_AS_RF_SWITCH: true
  spidev: spidev0.0
@@ -1,17 +1,8 @@
-Meta:
-  name: RAK6421 + RAK13300 Slot 2
-  support: official
-  compatible:
-    - raspberry-pi
-
 Lora:
-  ### RAK13300 in Slot 2 pins
+  ### RAK13300in Slot 2 pins
  IRQ: 18 #IO6
  Reset: 24 # IO4
  Busy: 19 # IO5
  # Ant_sw: 23 # IO3 
-  Enable_Pins:
-    - 26
-    - 23
  spidev: spidev0.1
  # CS: 7
@@ -1,22 +0,0 @@
-Meta:
-  name: RAK6421 + RAK13302 Slot 1
-  support: official
-  compatible:
-    - raspberry-pi
-
-Lora:
-
-  ### RAK13302 in Slot 1
-  Module: sx1262
-  IRQ: 22 #IO6
-  Reset: 16 # IO4
-  Busy: 24 # IO5
-  # Ant_sw: 13 # IO3 
-  Enable_Pins:
-    - 12
-    - 13
-  DIO3_TCXO_VOLTAGE: true
-  DIO2_AS_RF_SWITCH: true
-  spidev: spidev0.0
-  # CS: 8
-  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]
@@ -1,18 +0,0 @@
-Meta:
-  name: RAK6421 + RAK13302 Slot 2
-  support: official
-  compatible:
-    - raspberry-pi
-
-Lora:
-  ### RAK13302 in Slot 2 pins
-  IRQ: 18 #IO6
-  Reset: 24 # IO4
-  Busy: 19 # IO5
-  # Ant_sw: 23 # IO3 
-  Enable_Pins:
-    - 26
-    - 23
-  spidev: spidev0.1
-  # CS: 7
-  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]
@@ -1,21 +1,11 @@
-Meta:
-  name: RAK6421 + RAK13300 Slot 1 (Autoconf default)
-  support: official
-  compatible:
-    - raspberry-pi
-
 Lora:

-  ### RAK13300 in Slot 1
+  ### RAK13300in Slot 1
  Module: sx1262
  IRQ: 22 #IO6
  Reset: 16 # IO4
  Busy: 24 # IO5
-  Enable_Pins:
-    - 12
-    - 13
+  # Ant_sw: 13 # IO3 
  DIO3_TCXO_VOLTAGE: true
  DIO2_AS_RF_SWITCH: true
  spidev: spidev0.0
-  # GPIO_DETECT_PA: 13
-  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]
@@ -1,9 +1,3 @@
-Meta:
-  name: Luckfox Lyra PicoCalc Wio LoRa SX1262
-  support: official
-  compatible:
-    - luckfox-lyra-plus # Armbian
-
 Lora:
  Module: sx1262
  DIO2_AS_RF_SWITCH: true
@@ -1,23 +0,0 @@
-# For use with Armbian luckfox-lyra-ultra-w
-# Enable overlay 'luckfox-lyra-ultra-w-spi0-cs0-spidev' with armbian-config
-# https://github.com/wehooper4/Meshtastic-Hardware/tree/main/Luckfox%20Ultra%20Hat
-# 1 Watt Lyra Ultra hat
-Meta:
-  name: wehooper4 Luckfox Ultra 1W
-  support: community
-  compatible:
-    - luckfox-pico-ultra # Armbian
-    - luckfox-lyra-ultra # Armbian
-
-Lora:
-  Module: sx1262
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  CS: 10
-  IRQ: 5
-  Busy: 11
-  Reset: 9
-  RXen: 14
-
-  spidev: spidev0.0 #pins are (CS=10, CLK=8, MOSI=6, MISO=7)
-  spiSpeed: 2000000
@@ -1,24 +0,0 @@
-# For use with Armbian luckfox-lyra-ultra-w
-# Enable overlay 'luckfox-lyra-ultra-w-spi0-cs0-spidev' with armbian-config
-# https://github.com/wehooper4/Meshtastic-Hardware/tree/main/Luckfox%20Ultra%20Hat
-# 2 Watt Lyra Ultra hat
-Meta:
-  name: wehooper4 Luckfox Ultra 2W
-  support: community
-  compatible:
-    - luckfox-pico-ultra # Armbian
-    - luckfox-lyra-ultra # Armbian
-
-Lora:
-  Module: sx1262
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  SX126X_MAX_POWER: 8
-  CS: 10
-  IRQ: 5
-  Busy: 11
-  Reset: 9
-  RXen: 14
-
-  spidev: spidev0.0 #pins are (CS=10, CLK=8, MOSI=6, MISO=7)
-  spiSpeed: 2000000
@@ -1,31 +0,0 @@
-# For use with Armbian luckfox-lyra // luckfox-lyra-plus
-# Enable overlay 'luckfox-lyra-plus-spi0-cs0_rmio13-spidev' with armbian-config
-# Waveshare LoRa HAT for Raspberry Pi Pico
-# https://www.waveshare.com/wiki/Pico-LoRa-SX1262
-Meta:
-  name: Waveshare LoRa HAT for Raspberry Pi Pico
-  support: community
-  compatible:
-    - luckfox-lyra-plus # Armbian
-
-Lora:
-  Module: sx1262
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  spidev: spidev0.0
-  CS: # GPIO0_B5
-    pin: 13
-    gpiochip: 0
-    line: 13
-  IRQ: # GPIO1_C2
-    pin: 50
-    gpiochip: 1
-    line: 18
-  Busy: # GPIO0_B4
-    pin: 12
-    gpiochip: 0
-    line: 12
-  Reset: # GPIO0_A2
-    pin: 2
-    gpiochip: 0
-    line: 2
@@ -1,9 +1,3 @@
-Meta:
-  name: Lora Meshstick SX1262
-  support: official
-  compatible:
-    - usb
-
 Lora:
  Module: sx1262
  CS: 0
@@ -1,9 +1,3 @@
-Meta:
-  name: Lora Meshstick SX1262
-  support: community
-  compatible:
-    - usb
-
 Lora:
  Module: lr1121
  CS: 0
@@ -1,11 +1,5 @@
-Meta:
-  name: Pinedio USB SX1262
-  support: deprecated
-  compatible:
-    - usb
-
 Lora:
  Module: sx1262
  CS: 0 
  IRQ: 10
-  spidev: ch341
+  spidev: ch341
@@ -1,9 +1,3 @@
-Meta:
-  name: raxda-rock2f-starter-edition-hat
-  support: community
-  compatible:
-    - rock-2f # Armbian
-
 Lora:

 ### Raxda Rock 2F running Armbian Linux 6.1.99-vendor-rk35xx
@@ -1,11 +1,5 @@
 # https://www.waveshare.com/core1262-868m.htm
 # https://github.com/markbirss/lora-starter-edition-sx1262-i2c
-Meta:
-  name: lora-starter-edition-sx1262-i2c
-  support: community
-  compatible:
-    - raspberry-pi
-
 Lora:
  Module: sx1262  # Starter Edition SX1262 I2C Raspberry Pi HAT
  DIO2_AS_RF_SWITCH: true
@@ -1,9 +1,3 @@
-Meta:
-  name: meshstick-1262
-  support: official
-  compatible:
-    - usb
-
 Lora:
  Module: sx1262
  CS: 0
@@ -1,9 +1,3 @@
-Meta:
-  name: meshtoad-e22
-  support: official
-  compatible:
-    - usb
-
 Lora:
  Module: sx1262
  CS: 0
@@ -1,9 +1,3 @@
-Meta:
-  name: umesh-1262-30dbm
-  support: community
-  compatible:
-    - clockwork-uconsole
-
 Lora:
  Module: sx1262
  CS: 0
@@ -19,7 +13,8 @@ Lora:
 #  USB_Serialnum: 12345678
  SX126X_MAX_POWER: 22
 # Reduce output power to improve EMI
-  TX_GAIN_LORA: [12, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 8, 8, 7]
+  NUM_PA_POINTS: 22
+  TX_GAIN_LORA: 12, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 8, 8, 7
 # Note: This module integrates an additional PA to achieve higher output power.
 # The 'power' parameter here does not represent the actual RF output.
 # TX_GAIN_LORA defines the gain offset applied at each SX1262 input power step (1–22 dBm).
@@ -1,9 +1,3 @@
-Meta:
-  name: umesh-1268-30dbm
-  support: community
-  compatible:
-    - clockwork-uconsole
-
 Lora:
  Module: sx1268
  CS: 0
@@ -19,7 +13,8 @@ Lora:
 #  USB_Serialnum: 12345678
  SX126X_MAX_POWER: 22
 # Reduce output power to improve EMI
-  TX_GAIN_LORA: [12, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 8, 8, 7]
+  NUM_PA_POINTS: 22
+  TX_GAIN_LORA: 12, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 8, 8, 7
 # Note: This module integrates an additional PA to achieve higher output power.
 # The 'power' parameter here does not represent the actual RF output.
 # TX_GAIN_LORA defines the gain offset applied at each SX1262 input power step (1–22 dBm).
@@ -1,9 +1,3 @@
-Meta:
-  name: Waveshare SX1262
-  support: deprecated
-  compatible:
-    - raspberry-pi
-
 Lora:
  Module: sx1262  # Waveshare SX126X XXXM
  DIO2_AS_RF_SWITCH: true
@@ -1,12 +1,5 @@
 # https://www.waveshare.com/pico-lora-sx1262-868m.htm
 # https://github.com/markbirss/lora-ws-raspberry-pi-pico-to-rpi-adapter
-
-Meta:
-  name: ws-raspberry-pico-to-rpi-adapter
-  support: community
-  compatible:
-    - raspberry-pi
-
 Lora:
  Module: sx1262  # Waveshare Raspberry Pi Pico to Raspberry Pi HAT Adapter
  DIO2_AS_RF_SWITCH: true
@@ -15,12 +15,6 @@
 #   5     CS          24
 #   26    DIO1/IRQ    26

-Meta:
-  name: ws-raspberry-pico-to-orangepi-03
-  support: community
-  compatible:
-    - orange-pi-zero-3 # Armbian
-
 Lora:
  Module: sx1262  # Waveshare Raspberry Pico Lora module
  DIO2_AS_RF_SWITCH: true
@@ -43,7 +43,7 @@ for pio_env in pio_envs:
  env = {
    "ci": {"board": pio_env, "platform": env_platform},
    "board_level": cfg.get(f"env:{pio_env}", "board_level", default=None),
-    "board_check": cfg.get(f"env:{pio_env}", "board_check", default="false").strip().lower() == "true",
+    "board_check": bool(cfg.get(f"env:{pio_env}", "board_check", default=False)),
  }
  all_envs.append(env)

@@ -87,12 +87,6 @@
  </screenshots>

  <releases>
-    <release version="2.7.21" date="2026-03-11">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.21</url>
-    </release>
-    <release version="2.7.20" date="2026-02-11">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.20</url>
-    </release>
    <release version="2.7.19" date="2026-01-22">
      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.19</url>
    </release>
@@ -1,44 +0,0 @@
-#!/usr/bin/env bash
-# Run native PlatformIO tests inside Docker (for macOS / non-Linux hosts).
-#
-# Usage:
-#   ./bin/test-native-docker.sh                          # run all native tests
-#   ./bin/test-native-docker.sh -f test_transmit_history  # run specific test filter
-#   ./bin/test-native-docker.sh --rebuild                 # force rebuild the image
-#
-set -euo pipefail
-
-SCRIPT_DIR="$(cd "$(dirname "$0")" && pwd)"
-ROOT_DIR="$(cd "$SCRIPT_DIR/.." && pwd)"
-IMAGE_NAME="meshtastic-native-test"
-
-REBUILD=false
-EXTRA_ARGS=()
-
-for arg in "$@"; do
-    if [[ "$arg" == "--rebuild" ]]; then
-        REBUILD=true
-    else
-        EXTRA_ARGS+=("$arg")
-    fi
-done
-
-if $REBUILD || ! docker image inspect "$IMAGE_NAME" >/dev/null 2>&1; then
-    echo "Building test image (first run may take a few minutes)..."
-    docker build -t "$IMAGE_NAME" -f "$ROOT_DIR/Dockerfile.test" "$ROOT_DIR"
-fi
-
-# Disable BUILD_EPOCH to avoid full rebuilds between test runs (matches CI)
-sed_cmd='s/-DBUILD_EPOCH=$UNIX_TIME/#-DBUILD_EPOCH=$UNIX_TIME/'
-
-# Default: run all tests. Pass extra args (e.g. -f test_transmit_history) through.
-if [[ ${#EXTRA_ARGS[@]} -eq 0 ]]; then
-    CMD=("platformio" "test" "-e" "coverage" "-v")
-else
-    CMD=("platformio" "test" "-e" "coverage" "-v" "${EXTRA_ARGS[@]}")
-fi
-
-exec docker run --rm \
-    -v "$ROOT_DIR:/src:ro" \
-    "$IMAGE_NAME" \
-    bash -c "rm -rf /tmp/fw-test && cp -a /src /tmp/fw-test && cd /tmp/fw-test && sed -i '${sed_cmd}' platformio.ini && ${CMD[*]}"
@@ -1,54 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x239A", "0x4405"],
-      ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"],
-      ["0x2886", "0x1667"]
-    ],
-    "usb_product": "HT-n5262G",
-    "mcu": "nrf52840",
-    "variant": "heltec_mesh_node_t096",
-    "variants_dir": "variants",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "Heltec nrf (Adafruit BSP)",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "https://heltec.org/",
-  "vendor": "Heltec"
-}
@@ -32,8 +32,7 @@
  "connectivity": ["bluetooth"],
  "debug": {
    "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
+    "svd_path": "nrf52840.svd"
  },
  "frameworks": ["arduino"],
  "name": "Minesemi ME25LS01",
@@ -33,8 +33,7 @@
  "connectivity": ["bluetooth"],
  "debug": {
    "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
+    "svd_path": "nrf52840.svd"
  },
  "frameworks": ["arduino"],
  "name": "MeshLink",
@@ -1,40 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "partitions": "default.csv"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DARDUINO_ESP32S3_DEV",
-      "-DARDUINO_USB_MODE=1",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "hwids": [["0x303A", "0x1001"]],
-    "mcu": "esp32s3",
-    "variant": "esp32s3"
-  },
-  "connectivity": ["wifi"],
-  "debug": {
-    "default_tool": "esp-builtin",
-    "onboard_tools": ["esp-builtin"],
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "LilyGo Mini-Epaper-S3 (4 MB Flash, 2MB PSRAM)",
-  "upload": {
-    "flash_size": "4MB",
-    "maximum_ram_size": 327680,
-    "maximum_size": 4194304,
-    "require_upload_port": true,
-    "speed": 460800
-  },
-  "url": "https://www.lilygo.cc",
-  "vendor": "LilyGo"
-}
@@ -31,8 +31,7 @@
  "connectivity": ["bluetooth"],
  "debug": {
    "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
+    "svd_path": "nrf52840.svd"
  },
  "frameworks": ["arduino"],
  "name": "Minimesh Lite",
@@ -32,8 +32,7 @@
  "connectivity": ["bluetooth"],
  "debug": {
    "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
+    "svd_path": "nrf52840.svd"
  },
  "frameworks": ["arduino"],
  "name": "MINEWSEMI_MS24SF1_SX1262",
@@ -32,8 +32,7 @@
  "connectivity": ["bluetooth"],
  "debug": {
    "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
+    "svd_path": "nrf52840.svd"
  },
  "frameworks": ["arduino"],
  "name": "BQ nRF52840",
@@ -33,8 +33,7 @@
  "connectivity": ["bluetooth"],
  "debug": {
    "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
+    "svd_path": "nrf52840.svd"
  },
  "frameworks": ["arduino"],
  "name": "ProMicro compatible nRF52840",
@@ -8,7 +8,7 @@
    "extra_flags": [
      "-DBOARD_HAS_PSRAM",
      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_USB_MODE=0",
      "-DARDUINO_RUNNING_CORE=1",
      "-DARDUINO_EVENT_RUNNING_CORE=0"
    ],
@@ -1,38 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "memory_type": "qio_opi",
-      "partitions": "default_16MB.csv"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=0",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=1"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "hwids": [["0x303A", "0x1001"]],
-    "mcu": "esp32s3",
-    "variant": "esp32s3"
-  },
-  "connectivity": ["wifi", "bluetooth", "lora"],
-  "debug": {
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "LilyGo T5-ePaper-S3",
-  "upload": {
-    "flash_size": "16MB",
-    "maximum_ram_size": 327680,
-    "maximum_size": 16777216,
-    "require_upload_port": true,
-    "speed": 921600
-  },
-  "url": "https://lilygo.cc/products/t5-e-paper-s3-pro",
-  "vendor": "LILYGO"
-}
@@ -33,8 +33,7 @@
  "connectivity": ["bluetooth"],
  "debug": {
    "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
+    "svd_path": "nrf52840.svd"
  },
  "frameworks": ["arduino"],
  "name": "Seeed T1000-E",
@@ -1,29 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32_out.ld"
-    },
-    "core": "esp32",
-    "extra_flags": "-DARDUINO_T_Beam",
-    "f_cpu": "240000000L",
-    "f_flash": "40000000L",
-    "flash_mode": "dio",
-    "mcu": "esp32",
-    "variant": "tbeam"
-  },
-  "connectivity": ["wifi", "bluetooth", "can", "ethernet"],
-  "debug": {
-    "openocd_board": "esp-wroom-32.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "TTGO T-Beam (PSRAM Disabled)",
-  "upload": {
-    "flash_size": "4MB",
-    "maximum_ram_size": 1310720,
-    "maximum_size": 4194304,
-    "require_upload_port": true,
-    "speed": 460800
-  },
-  "url": "https://github.com/LilyGO/TTGO-T-Beam",
-  "vendor": "TTGO"
-}
@@ -25,8 +25,7 @@
  "connectivity": ["bluetooth"],
  "debug": {
    "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
+    "svd_path": "nrf52840.svd"
  },
  "frameworks": ["arduino", "freertos"],
  "name": "Seeed WIO WM1110",
@@ -32,8 +32,7 @@
  "connectivity": ["bluetooth"],
  "debug": {
    "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
+    "svd_path": "nrf52840.svd"
  },
  "frameworks": ["arduino"],
  "name": "Seeed WIO WM1110",
@@ -32,8 +32,7 @@
  "connectivity": ["bluetooth"],
  "debug": {
    "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
+    "svd_path": "nrf52840.svd"
  },
  "frameworks": ["arduino"],
  "name": "Seeed WIO WM1110",
@@ -12,6 +12,6 @@ Ex:
 - `logo_320x480.png`
 - `logo_320x240.png`

-This file is copied to `data/boot/logo.png` before filesystem image compilation.
+This file is copied to `data/boot/logo.png` before filesytem image compilation.

 For additional examples see the [`event/defcon33` branch](https://github.com/meshtastic/firmware/tree/event/defcon33).
@@ -1,15 +1,3 @@
-meshtasticd (2.7.21.0) unstable; urgency=medium
-
-  * Version 2.7.21
-
- -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Wed, 11 Mar 2026 11:45:36 +0000
-
-meshtasticd (2.7.20.0) unstable; urgency=medium
-
-  * Version 2.7.20
-
- -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Wed, 11 Feb 2026 12:19:54 +0000
-
 meshtasticd (2.7.19.0) unstable; urgency=medium

  * Version 2.7.19
@@ -3,17 +3,10 @@ export DEBEMAIL="jbennett@incomsystems.biz"
 export PLATFORMIO_LIBDEPS_DIR=pio/libdeps
 export PLATFORMIO_PACKAGES_DIR=pio/packages
 export PLATFORMIO_CORE_DIR=pio/core
-export PLATFORMIO_SETTING_ENABLE_TELEMETRY=0
-export PLATFORMIO_SETTING_CHECK_PLATFORMIO_INTERVAL=3650
-export PLATFORMIO_SETTING_CHECK_PRUNE_SYSTEM_THRESHOLD=10240

 # Download libraries to `pio`
 platformio pkg install -e native-tft
 platformio pkg install -e native-tft -t platformio/tool-scons@4.40502.0
-# Mangle PlatformIO cache to prevent internet access at build-time
-# Simply adds 1 to all expiry (epoch) timestamps, adding ~500 years to expiry date
-cp pio/core/.cache/downloads/usage.db pio/core/.cache/downloads/usage.db.bak
-jq -c 'with_entries(.value |= (. | tostring + "1" | tonumber))' pio/core/.cache/downloads/usage.db.bak >pio/core/.cache/downloads/usage.db
 # Compress `pio` directory to prevent dh_clean from sanitizing it
 tar -cf pio.tar pio/
 rm -rf pio
@@ -27,10 +20,5 @@ rm -rf debian/changelog
 dch --create --distribution "$SERIES" --package "$package" --newversion "$PKG_VERSION~$SERIES" \
 	"GitHub Actions Automatic packaging for $PKG_VERSION~$SERIES"

-if [[ -n $GPG_KEY_ID ]]; then
-	# Build and sign the source deb
-	debuild -S -nc -k"$GPG_KEY_ID"
-else
-	# Build the source deb without signing (forks)
-	debuild -S -nc
-fi
+# Build the source deb
+debuild -S -nc -k"$GPG_KEY_ID"
@@ -26,8 +26,7 @@ Build-Depends: debhelper-compat (= 13),
               libx11-dev,
               libinput-dev,
               libxkbcommon-x11-dev,
-               libsqlite3-dev,
-               libsdl2-dev
+               libsqlite3-dev
 Standards-Version: 4.6.2
 Homepage: https://github.com/meshtastic/firmware
 Rules-Requires-Root: no
@@ -9,10 +9,7 @@
 PIO_ENV:=\
 	PLATFORMIO_CORE_DIR=pio/core \
 	PLATFORMIO_LIBDEPS_DIR=pio/libdeps \
-	PLATFORMIO_PACKAGES_DIR=pio/packages \
-	PLATFORMIO_SETTING_ENABLE_TELEMETRY=0 \
-	PLATFORMIO_SETTING_CHECK_PLATFORMIO_INTERVAL=3650 \
-	PLATFORMIO_SETTING_CHECK_PRUNE_SYSTEM_THRESHOLD=10240
+	PLATFORMIO_PACKAGES_DIR=pio/packages

 # Raspbian armhf builds should be compatible with armv6-hardfloat
 # https://www.valvers.com/open-software/raspberry-pi/bare-metal-programming-in-c-part-1/#rpi1-compiler-flags
@@ -49,7 +49,6 @@ BuildRequires: pkgconfig(libulfius)
 BuildRequires: pkgconfig(x11)
 BuildRequires: pkgconfig(libinput)
 BuildRequires: pkgconfig(xkbcommon-x11)
-BuildRequires: pkgconfig(sdl2)

 # libbsd is needed on older Fedora/RHEL to provide 'strlcpy'
 %if 0%{?fedora} >= 39 || 0%{?rhel} >= 10
@@ -56,7 +56,6 @@ build_flags = -Wno-missing-field-initializers
 	-DMESHTASTIC_EXCLUDE_POWERSTRESS=1 ; exclude power stress test module from main firmware
 	-DMESHTASTIC_EXCLUDE_GENERIC_THREAD_MODULE=1
 	-DMESHTASTIC_EXCLUDE_POWERMON=1
-	-DMESHTASTIC_EXCLUDE_STATUS=1
 	-D MAX_THREADS=40 ; As we've split modules, we have more threads to manage
 	-DLED_BUILTIN=-1
 	#-DBUILD_EPOCH=$UNIX_TIME ; set in platformio-custom.py now
@@ -77,10 +76,10 @@ lib_deps =
 	https://github.com/meshtastic/TinyGPSPlus/archive/71a82db35f3b973440044c476d4bcdc673b104f4.zip
 	# renovate: datasource=git-refs depName=meshtastic-ArduinoThread packageName=https://github.com/meshtastic/ArduinoThread gitBranch=master
 	https://github.com/meshtastic/ArduinoThread/archive/b841b0415721f1341ea41cccfb4adccfaf951567.zip
-	# renovate: datasource=github-tags depName=Nanopb packageName=nanopb/nanopb
-	https://github.com/nanopb/nanopb/archive/refs/tags/nanopb-0.4.9.1.zip
-	# renovate: datasource=github-tags depName=ErriezCRC32 packageName=Erriez/ErriezCRC32
-	https://github.com/Erriez/ErriezCRC32/archive/refs/tags/1.0.1.zip
+	# renovate: datasource=custom.pio depName=Nanopb packageName=nanopb/library/Nanopb
+	nanopb/Nanopb@0.4.91
+	# renovate: datasource=custom.pio depName=ErriezCRC32 packageName=erriez/library/ErriezCRC32
+	erriez/ErriezCRC32@1.0.1

 ; Used for the code analysis in PIO Home / Inspect
 check_tool = cppcheck
@@ -95,38 +94,34 @@ check_flags =
 framework = arduino
 lib_deps =
 	${env.lib_deps}
-	# renovate: datasource=github-tags depName=NonBlockingRTTTL packageName=end2endzone/NonBlockingRTTTL
-	https://github.com/end2endzone/NonBlockingRTTTL/archive/refs/tags/1.4.0.zip
-build_unflags =
-	-std=c++11
-	-std=gnu++11
+	# renovate: datasource=custom.pio depName=NonBlockingRTTTL packageName=end2endzone/library/NonBlockingRTTTL
+	end2endzone/NonBlockingRTTTL@1.4.0
 build_flags = ${env.build_flags} -Os
-	-std=gnu++17
 build_src_filter = ${env.build_src_filter} -<platform/portduino/> -<graphics/niche/>

 ; Common libs for communicating over TCP/IP networks such as MQTT
 [networking_base]
 lib_deps =
-	# renovate: datasource=github-tags depName=TBPubSubClient packageName=thingsboard/pubsubclient
-	https://github.com/thingsboard/pubsubclient/archive/refs/tags/v2.12.1.zip
-	# renovate: datasource=github-tags depName=NTPClient packageName=arduino-libraries/NTPClient
-	https://github.com/arduino-libraries/NTPClient/archive/refs/tags/3.2.1.zip
+	# renovate: datasource=custom.pio depName=TBPubSubClient packageName=thingsboard/library/TBPubSubClient
+	thingsboard/TBPubSubClient@2.12.1
+	# renovate: datasource=custom.pio depName=NTPClient packageName=arduino-libraries/library/NTPClient
+	arduino-libraries/NTPClient@3.2.1

 ; Extra TCP/IP networking libs for supported devices
 [networking_extra]
 lib_deps =
-	# renovate: datasource=github-tags depName=Syslog packageName=arcao/Syslog
-	https://github.com/arcao/Syslog/archive/refs/tags/v2.0.zip
+	# renovate: datasource=custom.pio depName=Syslog packageName=arcao/library/Syslog
+	arcao/Syslog@2.0.0

 [radiolib_base]
 lib_deps =
-	# renovate: datasource=github-tags depName=RadioLib packageName=jgromes/RadioLib
-	https://github.com/jgromes/RadioLib/archive/refs/tags/7.6.0.zip
+	# renovate: datasource=custom.pio depName=RadioLib packageName=jgromes/library/RadioLib
+	jgromes/RadioLib@7.5.0

 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/7b1485b86c8d55a40e5226749097767e8b87f396.zip
+	https://github.com/meshtastic/device-ui/archive/6c75195e9987b7a49563232234f2f868dd343cae.zip

 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
@@ -142,7 +137,7 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=Adafruit BME280 packageName=adafruit/library/Adafruit BME280 Library
 	adafruit/Adafruit BME280 Library@2.3.0
 	# renovate: datasource=custom.pio depName=Adafruit DPS310 packageName=adafruit/library/Adafruit DPS310
-	adafruit/Adafruit DPS310@1.1.6
+	adafruit/Adafruit DPS310@1.1.5
 	# renovate: datasource=custom.pio depName=Adafruit MCP9808 packageName=adafruit/library/Adafruit MCP9808 Library
 	adafruit/Adafruit MCP9808 Library@2.0.2
 	# renovate: datasource=custom.pio depName=Adafruit INA260 packageName=adafruit/library/Adafruit INA260 Library
@@ -150,11 +145,11 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=Adafruit INA219 packageName=adafruit/library/Adafruit INA219
 	adafruit/Adafruit INA219@1.2.3
 	# renovate: datasource=custom.pio depName=Adafruit MPU6050 packageName=adafruit/library/Adafruit MPU6050
-	adafruit/Adafruit MPU6050@2.2.9
+	adafruit/Adafruit MPU6050@2.2.8
 	# renovate: datasource=custom.pio depName=Adafruit LIS3DH packageName=adafruit/library/Adafruit LIS3DH
 	adafruit/Adafruit LIS3DH@1.3.0
 	# renovate: datasource=custom.pio depName=Adafruit AHTX0 packageName=adafruit/library/Adafruit AHTX0
-	adafruit/Adafruit AHTX0@2.0.6
+	adafruit/Adafruit AHTX0@2.0.5
 	# renovate: datasource=custom.pio depName=Adafruit LSM6DS packageName=adafruit/library/Adafruit LSM6DS
 	adafruit/Adafruit LSM6DS@4.7.4
 	# renovate: datasource=custom.pio depName=Adafruit TSL2591 packageName=adafruit/library/Adafruit TSL2591 Library
@@ -162,7 +157,7 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=EmotiBit MLX90632 packageName=emotibit/library/EmotiBit MLX90632
 	emotibit/EmotiBit MLX90632@1.0.8
 	# renovate: datasource=custom.pio depName=Adafruit MLX90614 packageName=adafruit/library/Adafruit MLX90614 Library
-	adafruit/Adafruit MLX90614 Library@2.1.6
+	adafruit/Adafruit MLX90614 Library@2.1.5
 	# renovate: datasource=git-refs depName=INA3221 packageName=https://github.com/sgtwilko/INA3221 gitBranch=FixOverflow
 	https://github.com/sgtwilko/INA3221/archive/bb03d7e9bfcc74fc798838a54f4f99738f29fc6a.zip
 	# renovate: datasource=custom.pio depName=QMC5883L Compass packageName=mprograms/library/QMC5883LCompass
@@ -184,12 +179,46 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=DFRobot_BMM150 packageName=dfrobot/library/DFRobot_BMM150
 	dfrobot/DFRobot_BMM150@1.0.0
 	# renovate: datasource=custom.pio depName=Adafruit_TSL2561 packageName=adafruit/library/Adafruit TSL2561
-	adafruit/Adafruit TSL2561@1.1.3
+	adafruit/Adafruit TSL2561@1.1.2
 	# renovate: datasource=custom.pio depName=BH1750_WE packageName=wollewald/library/BH1750_WE
 	wollewald/BH1750_WE@1.1.10

-; Common environmental sensor libraries (not included in native / portduino)
-[environmental_extra_common]
+; (not included in native / portduino)
+[environmental_extra]
+lib_deps =
+	# renovate: datasource=custom.pio depName=Adafruit BMP3XX packageName=adafruit/library/Adafruit BMP3XX Library
+	adafruit/Adafruit BMP3XX Library@2.1.6
+	# renovate: datasource=custom.pio depName=Adafruit MAX1704X packageName=adafruit/library/Adafruit MAX1704X
+	adafruit/Adafruit MAX1704X@1.0.3
+	# renovate: datasource=custom.pio depName=Adafruit SHTC3 packageName=adafruit/library/Adafruit SHTC3 Library
+	adafruit/Adafruit SHTC3 Library@1.0.2
+	# renovate: datasource=custom.pio depName=Adafruit LPS2X packageName=adafruit/library/Adafruit LPS2X
+	adafruit/Adafruit LPS2X@2.0.6
+	# renovate: datasource=custom.pio depName=Adafruit SHT31 packageName=adafruit/library/Adafruit SHT31 Library
+	adafruit/Adafruit SHT31 Library@2.2.2
+	# renovate: datasource=custom.pio depName=Adafruit VEML7700 packageName=adafruit/library/Adafruit VEML7700 Library
+	adafruit/Adafruit VEML7700 Library@2.1.6
+	# renovate: datasource=custom.pio depName=Adafruit SHT4x packageName=adafruit/library/Adafruit SHT4x Library
+	adafruit/Adafruit SHT4x Library@1.0.5
+	# renovate: datasource=custom.pio depName=SparkFun Qwiic Scale NAU7802 packageName=sparkfun/library/SparkFun Qwiic Scale NAU7802 Arduino Library
+	sparkfun/SparkFun Qwiic Scale NAU7802 Arduino Library@1.0.6
+	# renovate: datasource=custom.pio depName=ClosedCube OPT3001 packageName=closedcube/library/ClosedCube OPT3001
+	closedcube/ClosedCube OPT3001@1.1.2
+	# renovate: datasource=custom.pio depName=Bosch BSEC2 packageName=boschsensortec/library/bsec2
+	boschsensortec/bsec2@1.10.2610
+	# renovate: datasource=custom.pio depName=Bosch BME68x packageName=boschsensortec/library/BME68x Sensor Library
+	boschsensortec/BME68x Sensor Library@1.3.40408
+	# renovate: datasource=git-refs depName=meshtastic-DFRobot_LarkWeatherStation packageName=https://github.com/meshtastic/DFRobot_LarkWeatherStation gitBranch=master
+	https://github.com/meshtastic/DFRobot_LarkWeatherStation/archive/4de3a9cadef0f6a5220a8a906cf9775b02b0040d.zip
+	# renovate: datasource=custom.pio depName=Sensirion Core packageName=sensirion/library/Sensirion Core
+	sensirion/Sensirion Core@0.7.2
+	# renovate: datasource=custom.pio depName=Sensirion I2C SCD4x packageName=sensirion/library/Sensirion I2C SCD4x
+	sensirion/Sensirion I2C SCD4x@1.1.0
+	# renovate: datasource=custom.pio depName=Sensirion I2C STC3x packageName=sensirion/library/Sensirion I2C STC3x
+	sensirion/Sensirion I2C STC3x@1.0.1
+
+; Same as environmental_extra but without BSEC (saves ~3.5KB DRAM for original ESP32 targets)
+[environmental_extra_no_bsec]
 lib_deps =
 	# renovate: datasource=custom.pio depName=Adafruit BMP3XX packageName=adafruit/library/Adafruit BMP3XX Library
 	adafruit/Adafruit BMP3XX Library@2.1.6
@@ -212,26 +241,8 @@ lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic-DFRobot_LarkWeatherStation packageName=https://github.com/meshtastic/DFRobot_LarkWeatherStation gitBranch=master
 	https://github.com/meshtastic/DFRobot_LarkWeatherStation/archive/4de3a9cadef0f6a5220a8a906cf9775b02b0040d.zip
 	# renovate: datasource=custom.pio depName=Sensirion Core packageName=sensirion/library/Sensirion Core
-	sensirion/Sensirion Core@0.7.3
+	sensirion/Sensirion Core@0.7.2
 	# renovate: datasource=custom.pio depName=Sensirion I2C SCD4x packageName=sensirion/library/Sensirion I2C SCD4x
 	sensirion/Sensirion I2C SCD4x@1.1.0
-	# renovate: datasource=custom.pio depName=Sensirion I2C SFA3x packageName=sensirion/library/Sensirion I2C SFA3x
-	sensirion/Sensirion I2C SFA3x@1.0.0
-	# renovate: datasource=custom.pio depName=Sensirion I2C SCD30 packageName=sensirion/library/Sensirion I2C SCD30
-	sensirion/Sensirion I2C SCD30@1.0.0
-
-; Environmental sensors with BSEC2 (Bosch proprietary IAQ)
-[environmental_extra]
-lib_deps =
-	${environmental_extra_common.lib_deps}
-	# renovate: datasource=custom.pio depName=Bosch BSEC2 packageName=boschsensortec/library/bsec2
-	boschsensortec/bsec2@1.10.2610
-	# renovate: datasource=custom.pio depName=Bosch BME68x packageName=boschsensortec/library/BME68x Sensor Library
-	boschsensortec/BME68x Sensor Library@1.3.40408
-
-; Environmental sensors without BSEC (saves ~3.5KB DRAM for original ESP32 targets)
-[environmental_extra_no_bsec]
-lib_deps =
-	${environmental_extra_common.lib_deps}
-	# renovate: datasource=custom.pio depName=Adafruit_BME680 packageName=adafruit/library/Adafruit BME680 Library
-	adafruit/Adafruit BME680 Library@2.0.6
+	# renovate: datasource=custom.pio depName=Sensirion I2C STC3x packageName=sensirion/library/Sensirion I2C STC3x
+	sensirion/Sensirion I2C STC3x@1.0.1
@@ -4,8 +4,6 @@
    ":dependencyDashboard",
    ":semanticCommitTypeAll(chore)",
    ":ignoreModulesAndTests",
-    ":noUnscheduledUpdates",
-    "schedule:daily",
    "group:recommended",
    "replacements:all",
    "workarounds:all"
@@ -1,23 +1,19 @@
-#ifndef AMBIENTLIGHTINGTHREAD_H
-#define AMBIENTLIGHTINGTHREAD_H
-
 #include "Observer.h"
 #include "configuration.h"
-#include "detect/ScanI2C.h"
-#include "sleep.h"

 #ifdef HAS_NCP5623
-#include <Wire.h>
-
-#include <NCP5623.h>
+#include <graphics/RAKled.h>
+NCP5623 rgb;
 #endif

 #ifdef HAS_LP5562
 #include <graphics/NomadStarLED.h>
+LP5562 rgbw;
 #endif

 #ifdef HAS_NEOPIXEL
-#include <Adafruit_NeoPixel.h>
+#include <graphics/NeoPixel.h>
+Adafruit_NeoPixel pixels(NEOPIXEL_COUNT, NEOPIXEL_DATA, NEOPIXEL_TYPE);
 #endif

 #ifdef UNPHONE
@@ -25,24 +21,10 @@
 extern unPhone unphone;
 #endif

+namespace concurrency
+{
 class AmbientLightingThread : public concurrency::OSThread
 {
-    friend class StatusLEDModule; // Let the LEDStatusModule trigger the ambient lighting for notifications and battery status.
-    friend class ExternalNotificationModule; // Let the ExternalNotificationModule trigger the ambient lighting for notifications.
-
-  private:
-#ifdef HAS_NCP5623
-    NCP5623 rgb;
-#endif
-
-#ifdef HAS_LP5562
-    LP5562 rgbw;
-#endif
-
-#ifdef HAS_NEOPIXEL
-    Adafruit_NeoPixel pixels = Adafruit_NeoPixel(NEOPIXEL_COUNT, NEOPIXEL_DATA, NEOPIXEL_TYPE);
-#endif
-
  public:
    explicit AmbientLightingThread(ScanI2C::DeviceType type) : OSThread("AmbientLighting")
    {
@@ -54,15 +36,14 @@ class AmbientLightingThread : public concurrency::OSThread
        moduleConfig.ambient_lighting.led_state = true;
 #endif
 #endif
-#if AMBIENT_LIGHTING_TEST
-        // define to enable test
-        moduleConfig.ambient_lighting.led_state = true;
-        moduleConfig.ambient_lighting.current = 10;
+        // Uncomment to test module
+        // moduleConfig.ambient_lighting.led_state = true;
+        // moduleConfig.ambient_lighting.current = 10;
        // Default to a color based on our node number
-        moduleConfig.ambient_lighting.red = (myNodeInfo.my_node_num & 0xFF0000) >> 16;
-        moduleConfig.ambient_lighting.green = (myNodeInfo.my_node_num & 0x00FF00) >> 8;
-        moduleConfig.ambient_lighting.blue = myNodeInfo.my_node_num & 0x0000FF;
-#endif
+        // moduleConfig.ambient_lighting.red = (myNodeInfo.my_node_num & 0xFF0000) >> 16;
+        // moduleConfig.ambient_lighting.green = (myNodeInfo.my_node_num & 0x00FF00) >> 8;
+        // moduleConfig.ambient_lighting.blue = myNodeInfo.my_node_num & 0x0000FF;
+
 #if defined(HAS_NCP5623) || defined(HAS_LP5562)
        _type = type;
        if (_type == ScanI2C::DeviceType::NONE) {
@@ -72,6 +53,11 @@ class AmbientLightingThread : public concurrency::OSThread
        }
 #endif
 #ifdef HAS_RGB_LED
+        if (!moduleConfig.ambient_lighting.led_state) {
+            LOG_DEBUG("AmbientLighting Disable due to moduleConfig.ambient_lighting.led_state OFF");
+            disable();
+            return;
+        }
        LOG_DEBUG("AmbientLighting init");
 #ifdef HAS_NCP5623
        if (_type == ScanI2C::NCP5623) {
@@ -91,13 +77,7 @@ class AmbientLightingThread : public concurrency::OSThread
                pixels.clear(); // Set all pixel colors to 'off'
                pixels.setBrightness(moduleConfig.ambient_lighting.current);
 #endif
-                if (!moduleConfig.ambient_lighting.led_state) {
-                    LOG_DEBUG("AmbientLighting Disable due to moduleConfig.ambient_lighting.led_state OFF");
-                    disable();
-                    return;
-                }
-                setLighting(moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red,
-                            moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+                setLighting();
 #endif
 #if defined(HAS_NCP5623) || defined(HAS_LP5562)
            }
@@ -111,8 +91,7 @@ class AmbientLightingThread : public concurrency::OSThread
 #if defined(HAS_NCP5623) || defined(HAS_LP5562)
            if ((_type == ScanI2C::NCP5623 || _type == ScanI2C::LP5562) && moduleConfig.ambient_lighting.led_state) {
 #endif
-                setLighting(moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red,
-                            moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+                setLighting();
                return 30000; // 30 seconds to reset from any animations that may have been running from Ext. Notification
 #if defined(HAS_NCP5623) || defined(HAS_LP5562)
            }
@@ -169,53 +148,65 @@ class AmbientLightingThread : public concurrency::OSThread
            return 0;
        }

-      protected:
-        void setLighting(float current, uint8_t red, uint8_t green, uint8_t blue)
+        void setLighting()
        {
 #ifdef HAS_NCP5623
-            rgb.setCurrent(current);
-            rgb.setRed(red);
-            rgb.setGreen(green);
-            rgb.setBlue(blue);
-            LOG_DEBUG("Init NCP5623 Ambient light w/ current=%f, red=%d, green=%d, blue=%d", current, red, green, blue);
+            rgb.setCurrent(moduleConfig.ambient_lighting.current);
+            rgb.setRed(moduleConfig.ambient_lighting.red);
+            rgb.setGreen(moduleConfig.ambient_lighting.green);
+            rgb.setBlue(moduleConfig.ambient_lighting.blue);
+            LOG_DEBUG("Init NCP5623 Ambient light w/ current=%d, red=%d, green=%d, blue=%d",
+                      moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red,
+                      moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
 #ifdef HAS_LP5562
-            rgbw.setCurrent(current);
-            rgbw.setRed(red);
-            rgbw.setGreen(green);
-            rgbw.setBlue(blue);
-            LOG_DEBUG("Init LP5562 Ambient light w/ current=%f, red=%d, green=%d, blue=%d", current, red, green, blue);
+            rgbw.setCurrent(moduleConfig.ambient_lighting.current);
+            rgbw.setRed(moduleConfig.ambient_lighting.red);
+            rgbw.setGreen(moduleConfig.ambient_lighting.green);
+            rgbw.setBlue(moduleConfig.ambient_lighting.blue);
+            LOG_DEBUG("Init LP5562 Ambient light w/ current=%d, red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.current,
+                      moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
 #ifdef HAS_NEOPIXEL
-            pixels.fill(pixels.Color(red, green, blue), 0, NEOPIXEL_COUNT);
+            pixels.fill(pixels.Color(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
+                                     moduleConfig.ambient_lighting.blue),
+                        0, NEOPIXEL_COUNT);

 // RadioMaster Bandit has addressable LED at the two buttons
 // this allow us to set different lighting for them in variant.h file.
+#ifdef RADIOMASTER_900_BANDIT
 #if defined(BUTTON1_COLOR) && defined(BUTTON1_COLOR_INDEX)
            pixels.fill(BUTTON1_COLOR, BUTTON1_COLOR_INDEX, 1);
 #endif
 #if defined(BUTTON2_COLOR) && defined(BUTTON2_COLOR_INDEX)
            pixels.fill(BUTTON2_COLOR, BUTTON2_COLOR_INDEX, 1);
+#endif
 #endif
            pixels.show();
-            // LOG_DEBUG("Init NeoPixel Ambient light w/ brightness(current)=%f, red=%d, green=%d, blue=%d",
-            //        current, red, green, blue);
+            // LOG_DEBUG("Init NeoPixel Ambient light w/ brightness(current)=%d, red=%d, green=%d, blue=%d",
+            //        moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red,
+            //        moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
 #ifdef RGBLED_CA
-            analogWrite(RGBLED_RED, 255 - red);
-            analogWrite(RGBLED_GREEN, 255 - green);
-            analogWrite(RGBLED_BLUE, 255 - blue);
-            LOG_DEBUG("Init Ambient light RGB Common Anode w/ red=%d, green=%d, blue=%d", red, green, blue);
+            analogWrite(RGBLED_RED, 255 - moduleConfig.ambient_lighting.red);
+            analogWrite(RGBLED_GREEN, 255 - moduleConfig.ambient_lighting.green);
+            analogWrite(RGBLED_BLUE, 255 - moduleConfig.ambient_lighting.blue);
+            LOG_DEBUG("Init Ambient light RGB Common Anode w/ red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.red,
+                      moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #elif defined(RGBLED_RED)
-        analogWrite(RGBLED_RED, red);
-        analogWrite(RGBLED_GREEN, green);
-        analogWrite(RGBLED_BLUE, blue);
-        LOG_DEBUG("Init Ambient light RGB Common Cathode w/ red=%d, green=%d, blue=%d", red, green, blue);
+        analogWrite(RGBLED_RED, moduleConfig.ambient_lighting.red);
+        analogWrite(RGBLED_GREEN, moduleConfig.ambient_lighting.green);
+        analogWrite(RGBLED_BLUE, moduleConfig.ambient_lighting.blue);
+        LOG_DEBUG("Init Ambient light RGB Common Cathode w/ red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.red,
+                  moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
 #ifdef UNPHONE
-            unphone.rgb(red, green, blue);
-            LOG_DEBUG("Init unPhone Ambient light w/ red=%d, green=%d, blue=%d", red, green, blue);
+            unphone.rgb(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
+                        moduleConfig.ambient_lighting.blue);
+            LOG_DEBUG("Init unPhone Ambient light w/ red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.red,
+                      moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
        }
    };
-#endif // AMBIENTLIGHTINGTHREAD_H
+
+} // namespace concurrency
@@ -4,7 +4,6 @@
 #include "configuration.h"
 #include "main.h"
 #include "sleep.h"
-#include <memory>

 #ifdef HAS_I2S
 #include <AudioFileSourcePROGMEM.h>
@@ -30,9 +29,9 @@ class AudioThread : public concurrency::OSThread
        io.digitalWrite(EXPANDS_AMP_EN, HIGH);
 #endif
        setCPUFast(true);
-        rtttlFile = std::unique_ptr<AudioFileSourcePROGMEM>(new AudioFileSourcePROGMEM(data, len));
-        i2sRtttl = std::unique_ptr<AudioGeneratorRTTTL>(new AudioGeneratorRTTTL());
-        i2sRtttl->begin(rtttlFile.get(), audioOut.get());
+        rtttlFile = new AudioFileSourcePROGMEM(data, len);
+        i2sRtttl = new AudioGeneratorRTTTL();
+        i2sRtttl->begin(rtttlFile, audioOut);
    }

    // Also handles actually playing the RTTTL, needs to be called in loop
@@ -48,10 +47,14 @@ class AudioThread : public concurrency::OSThread
    {
        if (i2sRtttl != nullptr) {
            i2sRtttl->stop();
+            delete i2sRtttl;
            i2sRtttl = nullptr;
        }

-        rtttlFile = nullptr;
+        if (rtttlFile != nullptr) {
+            delete rtttlFile;
+            rtttlFile = nullptr;
+        }

        setCPUFast(false);
 #ifdef T_LORA_PAGER
@@ -63,14 +66,16 @@ class AudioThread : public concurrency::OSThread
    {
        if (i2sRtttl != nullptr) {
            i2sRtttl->stop();
+            delete i2sRtttl;
            i2sRtttl = nullptr;
        }

 #ifdef T_LORA_PAGER
        io.digitalWrite(EXPANDS_AMP_EN, HIGH);
 #endif
-        auto sam = std::unique_ptr<ESP8266SAM>(new ESP8266SAM);
-        sam->Say(audioOut.get(), text);
+        ESP8266SAM *sam = new ESP8266SAM;
+        sam->Say(audioOut, text);
+        delete sam;
        setCPUFast(false);
 #ifdef T_LORA_PAGER
        io.digitalWrite(EXPANDS_AMP_EN, LOW);
@@ -91,15 +96,15 @@ class AudioThread : public concurrency::OSThread
  private:
    void initOutput()
    {
-        audioOut = std::unique_ptr<AudioOutputI2S>(new AudioOutputI2S(1, AudioOutputI2S::EXTERNAL_I2S));
+        audioOut = new AudioOutputI2S(1, AudioOutputI2S::EXTERNAL_I2S);
        audioOut->SetPinout(DAC_I2S_BCK, DAC_I2S_WS, DAC_I2S_DOUT, DAC_I2S_MCLK);
        audioOut->SetGain(0.2);
    };

-    std::unique_ptr<AudioGeneratorRTTTL> i2sRtttl = nullptr;
-    std::unique_ptr<AudioOutputI2S> audioOut = nullptr;
+    AudioGeneratorRTTTL *i2sRtttl = nullptr;
+    AudioOutputI2S *audioOut = nullptr;

-    std::unique_ptr<AudioFileSourcePROGMEM> rtttlFile = nullptr;
+    AudioFileSourcePROGMEM *rtttlFile = nullptr;
 };

 #endif
@@ -98,6 +98,7 @@ Syslog &Syslog::logMask(uint8_t priMask)

 void Syslog::enable()
 {
+    this->_client->begin(this->_port);
    this->_enabled = true;
 }

@@ -165,21 +166,14 @@ inline bool Syslog::_sendLog(uint16_t pri, const char *appName, const char *mess
    if ((pri & LOG_FACMASK) == 0)
        pri = LOG_MAKEPRI(LOG_FAC(this->_priDefault), pri);

-    // W5100S: acquire UDP socket on-demand to avoid permanent socket consumption
-    if (!this->_client->begin(this->_port)) {
-        return false;
-    }
-
    if (this->_server != NULL) {
        result = this->_client->beginPacket(this->_server, this->_port);
    } else {
        result = this->_client->beginPacket(this->_ip, this->_port);
    }

-    if (result != 1) {
-        this->_client->stop();
+    if (result != 1)
        return false;
-    }

    this->_client->print('<');
    this->_client->print(pri);
@@ -199,8 +193,6 @@ inline bool Syslog::_sendLog(uint16_t pri, const char *appName, const char *mess
    this->_client->print(message);
    this->_client->endPacket();

-    this->_client->stop(); // W5100S: release UDP socket for other services
-
    return true;
 }

@@ -4,8 +4,7 @@ const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaC
                                                         bool usePreset)
 {

-    // If use_preset is false, always return "Custom" — callers such as RadioInterface and Channels
-    // rely on this being a stable literal for channel-name hashing and default-channel detection.
+    // If use_preset is false, always return "Custom"
    if (!usePreset) {
        return "Custom";
    }
@@ -35,11 +35,6 @@
 #include "nrfx_power.h"
 #endif

-#if defined(ARCH_NRF52)
-#include "Nrf52SaadcLock.h"
-#include "concurrency/LockGuard.h"
-#endif
-
 #if defined(DEBUG_HEAP_MQTT) && !MESHTASTIC_EXCLUDE_MQTT
 #include "mqtt/MQTT.h"
 #include "target_specific.h"
@@ -333,9 +328,6 @@ class AnalogBatteryLevel : public HasBatteryLevel
            scaled = esp_adc_cal_raw_to_voltage(raw, adc_characs);
            scaled *= operativeAdcMultiplier;
 #else // block for all other platforms
-#ifdef ARCH_NRF52
-            concurrency::LockGuard saadcGuard(concurrency::nrf52SaadcLock);
-#endif
            for (uint32_t i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
                raw += analogRead(BATTERY_PIN);
            }
@@ -712,11 +704,11 @@ bool Power::setup()
        found = true;
    } else if (analogInit()) {
        found = true;
-    } else {
-#ifdef NRF_APM
-        found = true;
-#endif
    }
+
+#ifdef NRF_APM
+    found = true;
+#endif
 #ifdef EXT_PWR_DETECT
    attachInterrupt(
        EXT_PWR_DETECT,
@@ -854,10 +846,8 @@ void Power::readPowerStatus()

    if (batteryLevel) {
        hasBattery = batteryLevel->isBatteryConnect() ? OptTrue : OptFalse;
-#ifndef NRF_APM
        usbPowered = batteryLevel->isVbusIn() ? OptTrue : OptFalse;
        isChargingNow = batteryLevel->isCharging() ? OptTrue : OptFalse;
-#endif
        if (hasBattery) {
            batteryVoltageMv = batteryLevel->getBattVoltage();
            // If the AXP192 returns a valid battery percentage, use it
@@ -38,10 +38,7 @@ static bool isPowered()
    return true;
 #endif

-    bool isRouter = ((config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER ||
-                      config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER_LATE)
-                         ? 1
-                         : 0);
+    bool isRouter = (config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER ? 1 : 0);

    // If we are not a router and we already have AC power go to POWER state after init, otherwise go to ON
    // We assume routers might be powered all the time, but from a low current (solar) source
@@ -265,10 +262,7 @@ Fsm powerFSM(&stateBOOT);

 void PowerFSM_setup()
 {
-    bool isRouter = ((config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER ||
-                      config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER_LATE)
-                         ? 1
-                         : 0);
+    bool isRouter = (config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER ? 1 : 0);
    bool hasPower = isPowered();

    LOG_INFO("PowerFSM init, USB power=%d", hasPower ? 1 : 0);
@@ -227,21 +227,34 @@ void RedirectablePrint::log_to_ble(const char *logLevel, const char *format, va_
        isBleConnected = nrf52Bluetooth != nullptr && nrf52Bluetooth->isConnected();
 #endif
        if (isBleConnected) {
+            char *message;
+            size_t initialLen;
+            size_t len;
+            initialLen = strlen(format);
+            message = new char[initialLen + 1];
+            len = vsnprintf(message, initialLen + 1, format, arg);
+            if (len > initialLen) {
+                delete[] message;
+                message = new char[len + 1];
+                vsnprintf(message, len + 1, format, arg);
+            }
            auto thread = concurrency::OSThread::currentThread;
            meshtastic_LogRecord logRecord = meshtastic_LogRecord_init_zero;
            logRecord.level = getLogLevel(logLevel);
-            vsprintf(logRecord.message, format, arg);
+            strcpy(logRecord.message, message);
            if (thread)
                strcpy(logRecord.source, thread->ThreadName.c_str());
            logRecord.time = getValidTime(RTCQuality::RTCQualityDevice, true);

-            auto buffer = std::unique_ptr<uint8_t[]>(new uint8_t[meshtastic_LogRecord_size]);
-            size_t size = pb_encode_to_bytes(buffer.get(), meshtastic_LogRecord_size, meshtastic_LogRecord_fields, &logRecord);
+            uint8_t *buffer = new uint8_t[meshtastic_LogRecord_size];
+            size_t size = pb_encode_to_bytes(buffer, meshtastic_LogRecord_size, meshtastic_LogRecord_fields, &logRecord);
 #ifdef ARCH_ESP32
-            nimbleBluetooth->sendLog(buffer.get(), size);
+            nimbleBluetooth->sendLog(buffer, size);
 #elif defined(ARCH_NRF52)
-            nrf52Bluetooth->sendLog(buffer.get(), size);
+            nrf52Bluetooth->sendLog(buffer, size);
 #endif
+            delete[] message;
+            delete[] buffer;
        }
    }
 #else
@@ -279,8 +292,8 @@ void RedirectablePrint::log(const char *logLevel, const char *format, ...)

    // append \n to format
    size_t len = strlen(format);
-    auto newFormat = std::unique_ptr<char[]>(new char[len + 2]);
-    strcpy(newFormat.get(), format);
+    char *newFormat = new char[len + 2];
+    strcpy(newFormat, format);
    newFormat[len] = '\n';
    newFormat[len + 1] = '\0';

@@ -297,18 +310,23 @@ void RedirectablePrint::log(const char *logLevel, const char *format, ...)
            va_end(arg);
        }
        if (portduino_config.logoutputlevel < level_trace && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_TRACE) == 0) {
+            delete[] newFormat;
            return;
        }
    }
    if (portduino_config.logoutputlevel < level_debug && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_DEBUG) == 0) {
+        delete[] newFormat;
        return;
    } else if (portduino_config.logoutputlevel < level_info && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_INFO) == 0) {
+        delete[] newFormat;
        return;
    } else if (portduino_config.logoutputlevel < level_warn && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_WARN) == 0) {
+        delete[] newFormat;
        return;
    }
 #endif
    if (moduleConfig.serial.override_console_serial_port && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_DEBUG) == 0) {
+        delete[] newFormat;
        return;
    }

@@ -320,19 +338,11 @@ void RedirectablePrint::log(const char *logLevel, const char *format, ...)
 #endif

        va_list arg;
-        va_list arg_copy;
-
        va_start(arg, format);

-        va_copy(arg_copy, arg);
-        log_to_serial(logLevel, newFormat.get(), arg_copy);
-        va_end(arg_copy);
-
-        va_copy(arg_copy, arg);
-        log_to_syslog(logLevel, newFormat.get(), arg_copy);
-        va_end(arg_copy);
-
-        log_to_ble(logLevel, newFormat.get(), arg);
+        log_to_serial(logLevel, newFormat, arg);
+        log_to_syslog(logLevel, newFormat, arg);
+        log_to_ble(logLevel, newFormat, arg);

        va_end(arg);
 #ifdef HAS_FREE_RTOS
@@ -342,10 +352,11 @@ void RedirectablePrint::log(const char *logLevel, const char *format, ...)
 #endif
    }

+    delete[] newFormat;
    return;
 }

-void RedirectablePrint::hexDump(const char *logLevel, const unsigned char *buf, uint16_t len)
+void RedirectablePrint::hexDump(const char *logLevel, unsigned char *buf, uint16_t len)
 {
    const char alphabet[17] = "0123456789abcdef";
    log(logLevel, "    +------------------------------------------------+ +----------------+");
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Ben Meadors	8f18534ebd	Protobufs	2026-02-11 06:24:02 -06:00
Ben Meadors	fd084abbd9	Add STC31 CO2 sensor support and related configurations	2026-02-11 06:23:38 -06:00