Add missing hops in traceroute as "unkown" (#4056 )

E.g. in case a node couldn't decrypt the packet
Radio Master 900 Bandit Nano Power output interpolation (#4057 )
2024-06-09 16:03:53 -05:00 · 2024-06-09 16:03:39 -05:00 · 2024-06-09 16:02:52 -05:00 · 2024-06-09 16:33:50 +02:00 · 2024-06-09 08:32:31 -05:00 · 2024-06-09 07:55:45 -05:00
597 changed files with 36062 additions and 5965 deletions
@@ -37,7 +37,9 @@ body:
        - T-Lora v1
        - T-Lora v1.3
        - T-Lora v2 1.6
+        - T-Deck
        - T-Echo
+        - T-Watch
        - Rak4631
        - Rak11200
        - Rak11310
@@ -45,6 +47,8 @@ body:
        - Heltec v2
        - Heltec v2.1
        - Heltec V3
+        - Heltec Wireless Paper
+        - Heltec Wireless Tracker
        - Raspberry Pi Pico (W)
        - Relay v1
        - Relay v2
@@ -16,6 +16,9 @@ body:
      options:
        - NRF52
        - ESP32
+        - RP2040
+        - Linux Native
+        - other
    validations:
      required: true
  - type: textarea
@@ -5,24 +5,25 @@ runs:
  using: "composite"
  steps:
    - name: Checkout code
-      uses: actions/checkout@v3
+      uses: actions/checkout@v4
      with:
        submodules: "recursive"
        ref: ${{github.event.pull_request.head.ref}}
        repository: ${{github.event.pull_request.head.repo.full_name}}

-    - name: Install cppcheck
+    - name: Install dependencies 
      shell: bash
      run: |
-        sudo apt-get install -y cppcheck
+        sudo apt-get -y update 
+        sudo apt-get install -y cppcheck libbluetooth-dev libgpiod-dev libyaml-cpp-dev

    - name: Setup Python
-      uses: actions/setup-python@v4
+      uses: actions/setup-python@v5
      with:
        python-version: 3.x

    - name: Cache python libs
-      uses: actions/cache@v3
+      uses: actions/cache@v4
      id: cache-pip # needed in if test
      with:
        path: ~/.cache/pip
@@ -7,7 +7,7 @@
  is appreciated." This will allow other devs to potentially save you time by not accidentially duplicating work etc...
 - Please do not check in files that don't have real changes
 - Please do not reformat lines that you didn't have to change the code on
- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor along with the ['Trunk Check' extension](https://marketplace.visualstudio.com/items?itemName=trunk.io) (WSL2 is required on windows),
+- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor along with the ['Trunk Check' extension](https://marketplace.visualstudio.com/items?itemName=trunk.io) (In beta for windows, WSL2 for the linux version),
  because it automatically follows our indentation rules and its auto reformatting will not cause spurious changes to lines.
 - If your PR fixes a bug, mention "fixes #bugnum" somewhere in your pull request description.
 - If your other co-developers have comments on your PR please tweak as needed.
@@ -11,7 +11,7 @@ jobs:
  build-esp32:
    runs-on: ubuntu-latest
    steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
      - name: Build base
        id: base
        uses: ./.github/actions/setup-base
@@ -19,9 +19,9 @@ jobs:
      - name: Pull web ui
        uses: dsaltares/fetch-gh-release-asset@master
        with:
-          repo: "meshtastic/web"
-          file: "build.tar"
-          target: "build.tar"
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
          token: ${{ secrets.GITHUB_TOKEN }}

      - name: Unpack web ui
@@ -35,6 +35,7 @@ jobs:
          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32c3.ini

      - name: Build ESP32
        run: bin/build-esp32.sh ${{ inputs.board }}
@@ -42,9 +43,9 @@ jobs:
      - name: Pull OTA Firmware
        uses: dsaltares/fetch-gh-release-asset@master
        with:
-          repo: "meshtastic/firmware-ota"
-          file: "firmware.bin"
-          target: "release/bleota.bin"
+          repo: meshtastic/firmware-ota
+          file: firmware.bin
+          target: release/bleota.bin
          token: ${{ secrets.GITHUB_TOKEN }}

      - name: Get release version string
@@ -53,9 +54,10 @@ jobs:
        id: version

      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v3
+        uses: actions/upload-artifact@v4
        with:
          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
          path: |
            release/*.bin
            release/*.elf
@@ -0,0 +1,63 @@
+name: Build ESP32-C3
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  build-esp32-c3:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
+
+      - name: Pull web ui
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Unpack web ui
+        run: |
+          tar -xf build.tar -C data/static
+          rm build.tar
+      - name: Remove debug flags for release
+        if: ${{ github.event_name == 'workflow_dispatch' }}
+        run: |
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32c3.ini
+      - name: Build ESP32
+        run: bin/build-esp32.sh ${{ inputs.board }}
+
+      - name: Pull OTA Firmware
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: meshtastic/firmware-ota
+          file: firmware-c3.bin
+          target: release/bleota-c3.bin
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Get release version string
+        shell: bash
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
+          path: |
+            release/*.bin
+            release/*.elf
@@ -11,7 +11,7 @@ jobs:
  build-esp32-s3:
    runs-on: ubuntu-latest
    steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
      - name: Build base
        id: base
        uses: ./.github/actions/setup-base
@@ -19,9 +19,9 @@ jobs:
      - name: Pull web ui
        uses: dsaltares/fetch-gh-release-asset@master
        with:
-          repo: "meshtastic/web"
-          file: "build.tar"
-          target: "build.tar"
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
          token: ${{ secrets.GITHUB_TOKEN }}

      - name: Unpack web ui
@@ -34,15 +34,16 @@ jobs:
          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32c3.ini
      - name: Build ESP32
        run: bin/build-esp32.sh ${{ inputs.board }}

      - name: Pull OTA Firmware
        uses: dsaltares/fetch-gh-release-asset@master
        with:
-          repo: "meshtastic/firmware-ota"
-          file: "firmware-s3.bin"
-          target: "release/bleota-s3.bin"
+          repo: meshtastic/firmware-ota
+          file: firmware-s3.bin
+          target: release/bleota-s3.bin
          token: ${{ secrets.GITHUB_TOKEN }}

      - name: Get release version string
@@ -51,9 +52,10 @@ jobs:
        id: version

      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v3
+        uses: actions/upload-artifact@v4
        with:
          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
          path: |
            release/*.bin
            release/*.elf
@@ -0,0 +1,85 @@
+name: Build Native
+
+on: workflow_call
+
+permissions:
+  contents: write
+  packages: write
+
+jobs:
+  build-native:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Install libbluetooth
+        shell: bash
+        run: |
+          sudo apt-get update
+          sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev
+
+      - name: Checkout code
+        uses: actions/checkout@v4
+        with:
+          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Upgrade python tools
+        shell: bash
+        run: |
+          python -m pip install --upgrade pip
+          pip install -U platformio adafruit-nrfutil
+          pip install -U meshtastic --pre
+
+      - name: Upgrade platformio
+        shell: bash
+        run: |
+          pio upgrade
+
+      - name: Build Native
+        run: bin/build-native.sh
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-native-${{ steps.version.outputs.version }}.zip
+          overwrite: true
+          path: |
+            release/meshtasticd_linux_x86_64
+            bin/config-dist.yaml
+
+      - name: Docker login
+        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
+        uses: docker/login-action@v3
+        continue-on-error: true # FIXME: Failing docker login auth
+        with:
+          username: meshtastic
+          password: ${{ secrets.DOCKER_FIRMWARE_TOKEN }}
+
+      - name: Docker setup
+        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
+        continue-on-error: true # FIXME: Failing docker login auth
+        uses: docker/setup-buildx-action@v3
+
+      - name: Docker build and push tagged versions
+        if: ${{ github.event_name == 'workflow_dispatch' }}
+        continue-on-error: true # FIXME: Failing docker login auth
+        uses: docker/build-push-action@v5
+        with:
+          context: .
+          file: ./Dockerfile
+          push: true
+          tags: meshtastic/device-simulator:${{ steps.version.outputs.version }}
+
+      - name: Docker build and push
+        if: ${{ github.ref == 'refs/heads/master' && github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
+        continue-on-error: true # FIXME: Failing docker login auth
+        uses: docker/build-push-action@v5
+        with:
+          context: .
+          file: ./Dockerfile
+          push: true
+          tags: meshtastic/device-simulator:latest
@@ -11,7 +11,7 @@ jobs:
  build-nrf52:
    runs-on: ubuntu-latest
    steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
      - name: Build base
        id: base
        uses: ./.github/actions/setup-base
@@ -24,9 +24,10 @@ jobs:
        id: version

      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v3
+        uses: actions/upload-artifact@v4
        with:
          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
          path: |
            release/*.uf2
            release/*.elf
@@ -0,0 +1,51 @@
+name: Build Raspbian
+
+on: workflow_call
+
+permissions:
+  contents: write
+  packages: write
+
+jobs:
+  build-raspbian:
+    runs-on: [self-hosted, linux, ARM64]
+    steps:
+      - name: Install libbluetooth
+        shell: bash
+        run: |
+          apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev
+
+      - name: Checkout code
+        uses: actions/checkout@v4
+        with:
+          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Upgrade python tools
+        shell: bash
+        run: |
+          python -m pip install --upgrade pip
+          pip install -U platformio adafruit-nrfutil
+          pip install -U meshtastic --pre
+
+      - name: Upgrade platformio
+        shell: bash
+        run: |
+          pio upgrade
+
+      - name: Build Raspbian
+        run: bin/build-native.sh
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-raspbian-${{ steps.version.outputs.version }}.zip
+          overwrite: true
+          path: |
+            release/meshtasticd_linux_aarch64
+            bin/config-dist.yaml
@@ -0,0 +1,51 @@
+name: Build Raspbian Arm
+
+on: workflow_call
+
+permissions:
+  contents: write
+  packages: write
+
+jobs:
+  build-raspbian-armv7l:
+    runs-on: [self-hosted, linux, ARM]
+    steps:
+      - name: Install libbluetooth
+        shell: bash
+        run: |
+          apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev
+
+      - name: Checkout code
+        uses: actions/checkout@v4
+        with:
+          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Upgrade python tools
+        shell: bash
+        run: |
+          python -m pip install --upgrade pip
+          pip install -U platformio adafruit-nrfutil
+          pip install -U meshtastic --pre
+
+      - name: Upgrade platformio
+        shell: bash
+        run: |
+          pio upgrade
+
+      - name: Build Raspbian
+        run: bin/build-native.sh
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-raspbian-armv7l-${{ steps.version.outputs.version }}.zip
+          overwrite: true
+          path: |
+            release/meshtasticd_linux_armv7l
+            bin/config-dist.yaml
@@ -11,7 +11,7 @@ jobs:
  build-rpi2040:
    runs-on: ubuntu-latest
    steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
      - name: Build base
        id: base
        uses: ./.github/actions/setup-base
@@ -24,9 +24,10 @@ jobs:
        id: version

      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v3
+        uses: actions/upload-artifact@v4
        with:
          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
          path: |
            release/*.uf2
            release/*.elf
@@ -1,11 +1,14 @@
 name: CI
+#concurrency:
+#  group: ${{ github.ref }}
+#  cancel-in-progress: ${{ github.ref != 'refs/heads/master' }}
 on:
  # # Triggers the workflow on push but only for the master branch
  push:
    branches: [master, develop]
    paths-ignore:
      - "**.md"
-      - "version.properties"
+      - version.properties

  # Note: This is different from "pull_request". Need to specify ref when doing checkouts.
  pull_request_target:
@@ -17,215 +20,168 @@ on:
  workflow_dispatch:

 jobs:
-  check:
+  setup:
    strategy:
      fail-fast: false
      matrix:
-        include:
-          - board: rak11200
-          - board: tlora-v2-1-1_6
-          - board: tbeam
-          - board: heltec-v2_1
-          - board: meshtastic-diy-v1
-          - board: rak4631
-          - board: t-echo
-          - board: station-g1
-          - board: m5stack-coreink
-          - board: tbeam-s3-core
-          - board: tlora-t3s3-v1
-          #- board: rak11310
+        arch: [esp32, esp32s3, esp32c3, nrf52840, rp2040, check]
+    runs-on: ubuntu-latest
+    steps:
+      - id: checkout
+        uses: actions/checkout@v4
+        name: Checkout base
+      - id: jsonStep
+        run: |
+          TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
+          echo "$TARGETS"
+          echo "${{matrix.arch}}=$(jq -cn --argjson environments "$TARGETS" '{board: $environments}')" >> $GITHUB_OUTPUT
+    outputs:
+      esp32: ${{ steps.jsonStep.outputs.esp32 }}
+      esp32s3: ${{ steps.jsonStep.outputs.esp32s3 }}
+      esp32c3: ${{ steps.jsonStep.outputs.esp32c3 }}
+      nrf52840: ${{ steps.jsonStep.outputs.nrf52840 }}
+      rp2040: ${{ steps.jsonStep.outputs.rp2040 }}
+      check: ${{ steps.jsonStep.outputs.check }}
+
+  check:
+    needs: setup
+    strategy:
+      fail-fast: false
+      matrix: ${{ fromJson(needs.setup.outputs.check) }}

    runs-on: ubuntu-latest
    steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
      - name: Build base
        id: base
        uses: ./.github/actions/setup-base
-
-      - name: Trunk Check
-        if: ${{ github.event_name != 'workflow_dispatch' }}
-        uses: trunk-io/trunk-action@v1
-
      - name: Check ${{ matrix.board }}
        run: bin/check-all.sh ${{ matrix.board }}

  build-esp32:
+    needs: setup
    strategy:
      fail-fast: false
-      matrix:
-        include:
-          - board: rak11200
-          - board: tlora-v2
-          - board: tlora-v1
-          - board: tlora_v1_3
-          - board: tlora-v2-1-1_6
-          - board: tlora-v2-1-1_8
-          - board: tbeam
-          - board: heltec-v1
-          - board: heltec-v2_0
-          - board: heltec-v2_1
-          - board: tbeam0_7
-          - board: meshtastic-diy-v1
-          - board: meshtastic-dr-dev
-          - board: nano-g1
-          - board: station-g1
-          - board: m5stack-core
-          - board: m5stack-coreink
-          - board: nano-g1-explorer
+      matrix: ${{ fromJson(needs.setup.outputs.esp32) }}
    uses: ./.github/workflows/build_esp32.yml
    with:
      board: ${{ matrix.board }}

  build-esp32-s3:
+    needs: setup
    strategy:
      fail-fast: false
-      matrix:
-        include:
-          - board: heltec-v3
-          - board: heltec-wsl-v3
-          - board: tbeam-s3-core
-          - board: tlora-t3s3-v1
+      matrix: ${{ fromJson(needs.setup.outputs.esp32s3) }}
    uses: ./.github/workflows/build_esp32_s3.yml
    with:
      board: ${{ matrix.board }}

-  build-nrf52:
+  build-esp32-c3:
+    needs: setup
    strategy:
      fail-fast: false
-      max-parallel: 2
-      matrix:
-        include:
-          - board: rak4631
-          - board: rak4631_eink
-          - board: monteops_hw1
-          - board: t-echo
-          - board: pca10059_diy_eink
-          - board: feather_diy
+      matrix: ${{ fromJson(needs.setup.outputs.esp32c3) }}
+    uses: ./.github/workflows/build_esp32_c3.yml
+    with:
+      board: ${{ matrix.board }}
+
+  build-nrf52:
+    needs: setup
+    strategy:
+      fail-fast: false
+      matrix: ${{ fromJson(needs.setup.outputs.nrf52840) }}
    uses: ./.github/workflows/build_nrf52.yml
    with:
      board: ${{ matrix.board }}

  build-rpi2040:
+    needs: setup
    strategy:
      fail-fast: false
-      max-parallel: 2
-      matrix:
-        include:
-          - board: pico
-          - board: rak11310
+      matrix: ${{ fromJson(needs.setup.outputs.rp2040) }}
    uses: ./.github/workflows/build_rpi2040.yml
    with:
      board: ${{ matrix.board }}

-  build-native:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v3
-      - name: Build base
-        id: base
-        uses: ./.github/actions/setup-base
+  package-raspbian:
+    uses: ./.github/workflows/package_raspbian.yml

-      # We now run integration test before other build steps (to quickly see runtime failures)
-      #- name: Build for native
-      #  run: platformio run -e native
-      #- name: Integration test
-      # run: |
-      #.pio/build/native/program
-      #& sleep 20 # 5 seconds was not enough
-      #echo "Simulator started, launching python test..."
-      #python3 -c 'from meshtastic.test import testSimulator; testSimulator()'
+  package-raspbian-armv7l:
+    uses: ./.github/workflows/package_raspbian_armv7l.yml

-      - name: Build Native
-        run: bin/build-native.sh
-
-      - name: Get release version string
-        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v3
-        with:
-          name: firmware-native-${{ steps.version.outputs.version }}.zip
-          path: |
-            release/device-*.sh
-            release/device-*.bat
-
-      - name: Docker login
-        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
-        uses: docker/login-action@v2
-        with:
-          username: meshtastic
-          password: ${{ secrets.DOCKER_TOKEN }}
-
-      - name: Docker setup
-        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
-        uses: docker/setup-buildx-action@v2
-
-      - name: Docker build and push tagged versions
-        if: ${{ github.event_name == 'workflow_dispatch' }}
-        uses: docker/build-push-action@v3
-        with:
-          context: .
-          file: ./Dockerfile
-          push: true
-          tags: meshtastic/device-simulator:${{ steps.version.outputs.version }}
-
-      - name: Docker build and push
-        if: ${{ github.ref == 'refs/heads/master' && github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
-        uses: docker/build-push-action@v3
-        with:
-          context: .
-          file: ./Dockerfile
-          push: true
-          tags: meshtastic/device-simulator:latest
+  package-native:
+    uses: ./.github/workflows/package_amd64.yml

  after-checks:
    runs-on: ubuntu-latest
    needs: [check]
    steps:
      - name: Checkout code
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
        with:
          ref: ${{github.event.pull_request.head.ref}}
          repository: ${{github.event.pull_request.head.repo.full_name}}

  gather-artifacts:
+    permissions:
+      contents: write
+      pull-requests: write
    runs-on: ubuntu-latest
    needs:
-      [build-esp32, build-esp32-s3, build-nrf52, build-native, build-rpi2040]
+      [
+        build-esp32,
+        build-esp32-s3,
+        build-esp32-c3,
+        build-nrf52,
+        build-rpi2040,
+        package-raspbian,
+        package-raspbian-armv7l,
+        package-native
+      ]
    steps:
      - name: Checkout code
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
        with:
          ref: ${{github.event.pull_request.head.ref}}
          repository: ${{github.event.pull_request.head.repo.full_name}}

-      - uses: actions/download-artifact@v3
+      - uses: actions/download-artifact@v4
        with:
          path: ./
+          merge-multiple: true
+
+      - name: Display structure of downloaded files
+        run: ls -R

      - name: Get release version string
        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
        id: version

      - name: Move files up
-        run: mv -b -t ./ ./*tbeam-2*/littlefs*.bin ./*tbeam-2*/bleota.bin ./*tbeam-s3*/bleota-s3.bin ./**/firmware*.bin ./*t-echo*/Meshtastic_nRF52_factory_erase.uf2 ./**/firmware-*.uf2 ./**/firmware-*-ota.zip ./**/*.elf ./*native*/*device-*.sh ./*native*/*device-*.bat
+        run: mv -b -t ./ ./release/meshtasticd_linux_* ./bin/config-dist.yaml ./bin/device-*.sh ./bin/device-*.bat

      - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v3
+        uses: actions/upload-artifact@v4
        with:
          name: firmware-${{ steps.version.outputs.version }}
+          overwrite: true
          path: |
-            ./*.bin
-            ./*.uf2
+            ./firmware-*.bin
+            ./firmware-*.uf2
            ./firmware-*-ota.zip
            ./device-*.sh
            ./device-*.bat
+            ./meshtasticd_linux_*
+            ./config-dist.yaml
+            ./littlefs-*.bin
+            ./bleota*bin
+            ./Meshtastic_nRF52_factory_erase*.uf2
          retention-days: 90

-      - uses: actions/download-artifact@v3
+      - uses: actions/download-artifact@v4
        with:
          name: firmware-${{ steps.version.outputs.version }}
+          merge-multiple: true
          path: ./output

      # For diagnostics
@@ -241,22 +197,23 @@ jobs:
        run: zip -j -9 -r ./firmware-${{ steps.version.outputs.version }}.zip ./output

      - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v3
+        uses: actions/upload-artifact@v4
        with:
          name: debug-elfs-${{ steps.version.outputs.version }}.zip
+          overwrite: true
          path: ./*.elf
          retention-days: 30

      - name: Create request artifacts
+        continue-on-error: true # FIXME: Why are we getting 502, but things still work?
        if: ${{ github.event_name == 'pull_request_target' || github.event_name == 'pull_request' }}
-        uses: gavv/pull-request-artifacts@v1.0.0
+        uses: gavv/pull-request-artifacts@v2.1.0
        with:
          commit: ${{ (github.event.pull_request_target || github.event.pull_request).head.sha }}
          repo-token: ${{ secrets.GITHUB_TOKEN }}
          artifacts-token: ${{ secrets.ARTIFACTS_TOKEN }}
          artifacts-repo: meshtastic/artifacts
          artifacts-branch: device
-          artifacts-dir: pr
          artifacts: ./firmware-${{ steps.version.outputs.version }}.zip

  release-artifacts:
@@ -265,10 +222,10 @@ jobs:
    needs: [gather-artifacts, after-checks]
    steps:
      - name: Checkout
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4

      - name: Setup Python
-        uses: actions/setup-python@v4
+        uses: actions/setup-python@v5
        with:
          python-version: 3.x

@@ -276,11 +233,21 @@ jobs:
        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
        id: version

-      - uses: actions/download-artifact@v3
+      - uses: actions/download-artifact@v4
        with:
          name: firmware-${{ steps.version.outputs.version }}
+          merge-multiple: true
          path: ./output

+      - uses: actions/download-artifact@v4
+        with:
+          pattern: meshtasticd_${{ steps.version.outputs.version }}_*.deb
+          merge-multiple: true
+          path: ./output
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
      - name: Device scripts permissions
        run: |
          chmod +x ./output/device-install.sh
@@ -289,9 +256,10 @@ jobs:
      - name: Zip firmware
        run: zip -j -9 -r ./firmware-${{ steps.version.outputs.version }}.zip ./output

-      - uses: actions/download-artifact@v3
+      - uses: actions/download-artifact@v4
        with:
          name: debug-elfs-${{ steps.version.outputs.version }}.zip
+          merge-multiple: true
          path: ./elfs

      - name: Zip Elfs
@@ -307,7 +275,7 @@ jobs:
        with:
          draft: true
          prerelease: true
-          release_name: Meshtastic Firmware ${{ steps.version.outputs.version }}
+          release_name: Meshtastic Firmware ${{ steps.version.outputs.version }} Alpha
          tag_name: v${{ steps.version.outputs.version }}
          body: |
            Autogenerated by github action, developer should edit as required before publishing...
@@ -334,12 +302,42 @@ jobs:
          asset_name: debug-elfs-${{ steps.version.outputs.version }}.zip
          asset_content_type: application/zip

+      - name: Add raspbian aarch64 .deb
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: ./output/meshtasticd_${{ steps.version.outputs.version }}_arm64.deb
+          asset_name: meshtasticd_${{ steps.version.outputs.version }}_arm64.deb
+          asset_content_type: application/vnd.debian.binary-package
+
+      - name: Add raspbian armv7l .deb
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: ./output/meshtasticd_${{ steps.version.outputs.version }}_armhf.deb
+          asset_name: meshtasticd_${{ steps.version.outputs.version }}_armhf.deb
+          asset_content_type: application/vnd.debian.binary-package
+
+      - name: Add raspbian amd64 .deb
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: ./output/meshtasticd_${{ steps.version.outputs.version }}_amd64.deb
+          asset_name: meshtasticd_${{ steps.version.outputs.version }}_amd64.deb
+          asset_content_type: application/vnd.debian.binary-package
+
      - name: Bump version.properties
        run: >-
          bin/bump_version.py

      - name: Create version.properties pull request
-        uses: peter-evans/create-pull-request@v3
+        uses: peter-evans/create-pull-request@v6
        with:
          add-paths: |
            version.properties
@@ -11,9 +11,9 @@ jobs:

    steps:
      - name: Checkout
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4

      - name: Trunk Check
-        uses: trunk-io/trunk-action@v1
+        uses: trunk-io/trunk-action@782e83f803ca6e369f035d64c6ba2768174ba61b
        with:
          trunk-token: ${{ secrets.TRUNK_TOKEN }}
@@ -0,0 +1,78 @@
+name: Package Native
+
+on:
+  workflow_call:
+  workflow_dispatch:
+
+permissions:
+  contents: write
+  packages: write
+
+jobs:
+  build-native:
+    uses: ./.github/workflows/build_native.yml
+
+  package-native:
+    runs-on: ubuntu-latest
+    needs: build-native
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v4
+        with:
+          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Pull web ui
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Download artifacts
+        uses: actions/download-artifact@v4
+        with:
+          name: firmware-native-${{ steps.version.outputs.version }}.zip
+          merge-multiple: true
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
+      - name: build .debpkg
+        run: |
+          mkdir -p .debpkg/DEBIAN
+          mkdir -p .debpkg/usr/share/doc/meshtasticd/web
+          mkdir -p .debpkg/usr/sbin
+          mkdir -p .debpkg/etc/meshtasticd
+          mkdir -p .debpkg/usr/lib/systemd/system/
+          tar -xf build.tar -C .debpkg/usr/share/doc/meshtasticd/web
+          gunzip .debpkg/usr/share/doc/meshtasticd/web/*.gz
+          cp release/meshtasticd_linux_x86_64 .debpkg/usr/sbin/meshtasticd
+          cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml
+          chmod +x .debpkg/usr/sbin/meshtasticd
+          cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service
+          echo "/etc/meshtasticd/config.yaml" > .debpkg/DEBIAN/conffiles
+          chmod +x .debpkg/DEBIAN/conffiles
+
+      - uses: jiro4989/build-deb-action@v3
+        with:
+          package: meshtasticd
+          package_root: .debpkg
+          maintainer: Jonathan Bennett
+          version: ${{ steps.version.outputs.version }} # refs/tags/v*.*.*
+          arch: amd64
+          depends: libyaml-cpp0.7, openssl, libulfius2.7
+          desc: Native Linux Meshtastic binary.
+
+      - uses: actions/upload-artifact@v4
+        with:
+          name: meshtasticd_${{ steps.version.outputs.version }}_amd64.deb
+          overwrite: true
+          path: |
+            ./*.deb
@@ -0,0 +1,78 @@
+name: Package Raspbian
+
+on:
+  workflow_call:
+  workflow_dispatch:
+
+permissions:
+  contents: write
+  packages: write
+
+jobs:
+  build-raspbian:
+    uses: ./.github/workflows/build_raspbian.yml
+
+  package-raspbian:
+    runs-on: ubuntu-latest
+    needs: build-raspbian
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v4
+        with:
+          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Pull web ui
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Download artifacts
+        uses: actions/download-artifact@v4
+        with:
+          name: firmware-raspbian-${{ steps.version.outputs.version }}.zip
+          merge-multiple: true
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
+      - name: build .debpkg
+        run: |
+          mkdir -p .debpkg/DEBIAN
+          mkdir -p .debpkg/usr/share/doc/meshtasticd/web
+          mkdir -p .debpkg/usr/sbin
+          mkdir -p .debpkg/etc/meshtasticd
+          mkdir -p .debpkg/usr/lib/systemd/system/
+          tar -xf build.tar -C .debpkg/usr/share/doc/meshtasticd/web
+          gunzip .debpkg/usr/share/doc/meshtasticd/web/*.gz
+          cp release/meshtasticd_linux_aarch64 .debpkg/usr/sbin/meshtasticd
+          cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml
+          chmod +x .debpkg/usr/sbin/meshtasticd
+          cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service
+          echo "/etc/meshtasticd/config.yaml" > .debpkg/DEBIAN/conffiles
+          chmod +x .debpkg/DEBIAN/conffiles
+
+      - uses: jiro4989/build-deb-action@v3
+        with:
+          package: meshtasticd
+          package_root: .debpkg
+          maintainer: Jonathan Bennett
+          version: ${{ steps.version.outputs.version }} # refs/tags/v*.*.*
+          arch: arm64
+          depends: libyaml-cpp0.7, openssl, libulfius2.7
+          desc: Native Linux Meshtastic binary.
+
+      - uses: actions/upload-artifact@v4
+        with:
+          name: meshtasticd_${{ steps.version.outputs.version }}_arm64.deb
+          overwrite: true
+          path: |
+            ./*.deb
@@ -0,0 +1,78 @@
+name: Package Raspbian
+
+on:
+  workflow_call:
+  workflow_dispatch:
+
+permissions:
+  contents: write
+  packages: write
+
+jobs:
+  build-raspbian_armv7l:
+    uses: ./.github/workflows/build_raspbian_armv7l.yml
+
+  package-raspbian_armv7l:
+    runs-on: ubuntu-latest
+    needs: build-raspbian_armv7l
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v4
+        with:
+          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Pull web ui
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Download artifacts
+        uses: actions/download-artifact@v4
+        with:
+          name: firmware-raspbian-armv7l-${{ steps.version.outputs.version }}.zip
+          merge-multiple: true
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
+      - name: build .debpkg
+        run: |
+          mkdir -p .debpkg/DEBIAN
+          mkdir -p .debpkg/usr/share/doc/meshtasticd/web
+          mkdir -p .debpkg/usr/sbin
+          mkdir -p .debpkg/etc/meshtasticd
+          mkdir -p .debpkg/usr/lib/systemd/system/
+          tar -xf build.tar -C .debpkg/usr/share/doc/meshtasticd/web
+          gunzip .debpkg/usr/share/doc/meshtasticd/web/*.gz
+          cp release/meshtasticd_linux_armv7l .debpkg/usr/sbin/meshtasticd
+          cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml
+          chmod +x .debpkg/usr/sbin/meshtasticd
+          cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service
+          echo "/etc/meshtasticd/config.yaml" > .debpkg/DEBIAN/conffiles
+          chmod +x .debpkg/DEBIAN/conffiles
+
+      - uses: jiro4989/build-deb-action@v3
+        with:
+          package: meshtasticd
+          package_root: .debpkg
+          maintainer: Jonathan Bennett
+          version: ${{ steps.version.outputs.version }} # refs/tags/v*.*.*
+          arch: armhf
+          depends: libyaml-cpp0.7, openssl, libulfius2.7
+          desc: Native Linux Meshtastic binary.
+
+      - uses: actions/upload-artifact@v4
+        with:
+          name: meshtasticd_${{ steps.version.outputs.version }}_armhf.deb
+          overwrite: true
+          path: |
+            ./*.deb
@@ -16,7 +16,7 @@ jobs:
    steps:
      # step 1
      - name: clone application source code
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4

      # step 2
      - name: flawfinder_scan
@@ -27,14 +27,15 @@ jobs:

      # step 3
      - name: save report as pipeline artifact
-        uses: actions/upload-artifact@v3
+        uses: actions/upload-artifact@v4
        with:
          name: flawfinder_report.sarif
+          overwrite: true
          path: flawfinder_report.sarif

      # step 4
      - name: publish code scanning alerts
-        uses: github/codeql-action/upload-sarif@v2
+        uses: github/codeql-action/upload-sarif@v3
        with:
          sarif_file: flawfinder_report.sarif
          category: flawfinder
@@ -17,7 +17,7 @@ jobs:
    steps:
      # step 1
      - name: clone application source code
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4

      # step 2
      - name: full scan
@@ -29,14 +29,15 @@ jobs:

      # step 3
      - name: save report as pipeline artifact
-        uses: actions/upload-artifact@v3
+        uses: actions/upload-artifact@v4
        with:
          name: report.sarif
+          overwrite: true
          path: report.sarif

      # step 4
      - name: publish code scanning alerts
-        uses: github/codeql-action/upload-sarif@v2
+        uses: github/codeql-action/upload-sarif@v3
        with:
          sarif_file: report.sarif
          category: semgrep
@@ -11,7 +11,7 @@ jobs:
    steps:
      # step 1
      - name: clone application source code
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
        with:
          fetch-depth: 0

@@ -0,0 +1,22 @@
+name: Pull Request
+on: [pull_request]
+concurrency:
+  group: ${{ github.head_ref || github.run_id }}
+  cancel-in-progress: true
+
+permissions: read-all
+
+jobs:
+  trunk_check:
+    name: Trunk Check Runner
+    runs-on: ubuntu-latest
+    permissions:
+      checks: write # For trunk to post annotations
+      contents: read # For repo checkout
+
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+
+      - name: Trunk Check
+        uses: trunk-io/trunk-action@v1
@@ -7,7 +7,7 @@ jobs:

    steps:
      - name: Checkout code
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
        with:
          submodules: true

@@ -17,16 +17,16 @@ jobs:

      - name: Download nanopb
        run: |
-          wget https://jpa.kapsi.fi/nanopb/download/nanopb-0.4.7-linux-x86.tar.gz
-          tar xvzf nanopb-0.4.7-linux-x86.tar.gz
-          mv nanopb-0.4.7-linux-x86 nanopb-0.4.7
+          wget https://jpa.kapsi.fi/nanopb/download/nanopb-0.4.8-linux-x86.tar.gz
+          tar xvzf nanopb-0.4.8-linux-x86.tar.gz
+          mv nanopb-0.4.8-linux-x86 nanopb-0.4.8

      - name: Re-generate protocol buffers
        run: |
          ./bin/regen-protos.sh

      - name: Create pull request
-        uses: peter-evans/create-pull-request@v3
+        uses: peter-evans/create-pull-request@v6
        with:
          add-paths: |
            protobufs
@@ -31,3 +31,5 @@ venv/
 release/
 .vscode/extensions.json
 /compile_commands.json
+src/mesh/raspihttp/certificate.pem
+src/mesh/raspihttp/private_key.pem
@@ -2,7 +2,8 @@
 *logs
 *actions
 *notifications
+*tools
 plugins
 user_trunk.yaml
 user.yaml
-shims
+tmp
@@ -1,7 +1,10 @@
 enable=all
 source-path=SCRIPTDIR
 disable=SC2154
+disable=SC2248
+disable=SC2250

 # If you're having issues with shellcheck following source, disable the errors via:
 # disable=SC1090
 # disable=SC1091
+# 
@@ -3,7 +3,7 @@ rules:
    required: only-when-needed
    extra-allowed: ["{|}"]
  empty-values:
-    forbid-in-block-mappings: true
+    forbid-in-block-mappings: false
    forbid-in-flow-mappings: true
  key-duplicates: {}
  octal-values:
@@ -1,48 +1,45 @@
 version: 0.1
 cli:
-  version: 1.9.1
+  version: 1.22.1
 plugins:
  sources:
    - id: trunk
-      ref: v0.0.17
+      ref: v1.5.0
      uri: https://github.com/trunk-io/plugins
 lint:
  enabled:
-    - taplo@0.7.0
-    - ruff@0.0.265
-    - yamllint@1.31.0
-    - isort@5.12.0
-    - markdownlint@0.34.0
-    - oxipng@8.0.0
-    - svgo@3.0.2
-    - actionlint@1.6.24
-    - flake8@6.0.0
+    - trufflehog@3.76.3
+    - yamllint@1.35.1
+    - bandit@1.7.8
+    - checkov@3.2.95
+    - terrascan@1.19.1
+    - trivy@0.51.1
+    #- trufflehog@3.63.2-rc0
+    - taplo@0.8.1
+    - ruff@0.4.4
+    - isort@5.13.2
+    - markdownlint@0.40.0
+    - oxipng@9.1.1
+    - svgo@3.3.2
+    - actionlint@1.7.0
+    - flake8@7.0.0
    - hadolint@2.12.0
-    - shfmt@3.5.0
-    - shellcheck@0.9.0
-    - black@23.3.0
+    - shfmt@3.6.0
+    - shellcheck@0.10.0
+    - black@24.4.2
    - git-diff-check
-    - gitleaks@8.16.3
-    - clang-format@14.0.0
-    - prettier@2.8.8
-  disabled:
-    - taplo@0.7.0
-    - shellcheck@0.9.0
-    - shfmt@3.5.0
-    - oxipng@8.0.0
-    - actionlint@1.6.22
-    - markdownlint@0.34.0
-    - hadolint@2.12.0
-    - svgo@3.0.2
+    - gitleaks@8.18.2
+    - clang-format@16.0.3
+    - prettier@3.2.5
 runtimes:
  enabled:
    - python@3.10.8
-    - go@1.19.5
+    - go@1.21.0
    - node@18.12.1
 actions:
  disabled:
    - trunk-announce
-    - trunk-check-pre-push
-    - trunk-fmt-pre-commit
  enabled:
+    - trunk-fmt-pre-commit
+    - trunk-check-pre-push
    - trunk-upgrade-available
@@ -1,4 +1,7 @@
 {
  "editor.formatOnSave": true,
-  "editor.defaultFormatter": "trunk.io"
+  "editor.defaultFormatter": "trunk.io",
+  "trunk.enableWindows": true,
+  "files.insertFinalNewline": false,
+  "files.trimFinalNewlines": false
 }
@@ -1,4 +1,4 @@
-FROM debian:bullseye-slim AS builder
+FROM debian:bookworm-slim AS builder

 ENV DEBIAN_FRONTEND=noninteractive
 ENV TZ=Etc/UTC
@@ -11,31 +11,45 @@ SHELL ["/bin/bash", "-o", "pipefail", "-c"]

 # Install build deps
 USER root
-RUN apt-get update && \
-	apt-get -y install wget python3 g++ zip python3-venv git vim ca-certificates

-# create a non-priveleged user & group
+# trunk-ignore(terrascan/AC_DOCKER_0002): Known terrascan issue
+# trunk-ignore(hadolint/DL3008): Use latest version of packages for buildchain
+RUN apt-get update && apt-get install --no-install-recommends -y wget python3 python3-pip python3-wheel python3-venv g++ zip git \
+                           ca-certificates libgpiod-dev libyaml-cpp-dev libbluetooth-dev \
+                           libulfius-dev liborcania-dev libssl-dev pkg-config && \
+    apt-get clean && rm -rf /var/lib/apt/lists/* && mkdir /tmp/firmware
+
+RUN groupadd -g 1000 mesh && useradd -ml -u 1000 -g 1000 mesh && chown mesh:mesh /tmp/firmware
+USER mesh
+
+WORKDIR /tmp/firmware
+RUN python3 -m venv /tmp/firmware 
+RUN source ./bin/activate && pip3 install --no-cache-dir -U platformio==6.1.14
+# trunk-ignore(terrascan/AC_DOCKER_00024): We would actually like these files to be owned by mesh tyvm
+COPY --chown=mesh:mesh . /tmp/firmware
+RUN source ./bin/activate && chmod +x /tmp/firmware/bin/build-native.sh && ./bin/build-native.sh
+RUN cp "/tmp/firmware/release/meshtasticd_linux_$(uname -m)" "/tmp/firmware/release/meshtasticd"
+
+
+##### PRODUCTION BUILD #############
+
+FROM debian:bookworm-slim
+ENV DEBIAN_FRONTEND=noninteractive
+ENV TZ=Etc/UTC
+
+# trunk-ignore(terrascan/AC_DOCKER_0002): Known terrascan issue
+# trunk-ignore(hadolint/DL3008): Use latest version of packages for buildchain
+RUN apt-get update && apt-get --no-install-recommends -y install libc-bin libc6 libgpiod2 libyaml-cpp0.7 libulfius2.7 liborcania2.3 libssl3 && \
+    apt-get clean && rm -rf /var/lib/apt/lists/*
+
 RUN groupadd -g 1000 mesh && useradd -ml -u 1000 -g 1000 mesh
-
 USER mesh
-RUN wget https://raw.githubusercontent.com/platformio/platformio-core-installer/master/get-platformio.py -qO /tmp/get-platformio.py && \
-	chmod +x /tmp/get-platformio.py && \
-	python3 /tmp/get-platformio.py && \
-	git clone https://github.com/meshtastic/firmware --recurse-submodules /tmp/firmware && \
-	cd /tmp/firmware && \
-	chmod +x /tmp/firmware/bin/build-native.sh && \
-	source ~/.platformio/penv/bin/activate && \
-	./bin/build-native.sh

-FROM frolvlad/alpine-glibc
-
-RUN apk --update add --no-cache g++ shadow && \
-	groupadd -g 1000 mesh && useradd -ml -u 1000 -g 1000 mesh
-
-COPY --from=builder /tmp/firmware/release/meshtasticd_linux_amd64 /home/mesh/
-
-USER mesh
 WORKDIR /home/mesh
-CMD sh -cx "./meshtasticd_linux_amd64 --hwid '$RANDOM'"
+COPY --from=builder /tmp/firmware/release/meshtasticd /home/mesh/
+
+VOLUME /home/mesh/data
+
+CMD [ "sh",  "-cx", "./meshtasticd -d /home/mesh/data --hwid=${HWID:-$RANDOM}" ]

 HEALTHCHECK NONE
@@ -10,8 +10,8 @@

 This repository contains the device firmware for the Meshtastic project.

-**[Building Instructions](https://meshtastic.org/docs/development/firmware/build)**
-**[Flashing Instructions](https://meshtastic.org/docs/getting-started/flashing-firmware/)**
+- **[Building Instructions](https://meshtastic.org/docs/development/firmware/build)**
+- **[Flashing Instructions](https://meshtastic.org/docs/getting-started/flashing-firmware/)**

 ## Stats

@@ -1,10 +1,11 @@
 ; Common settings for ESP targes, mixin with extends = esp32_base
 [esp32_base]
 extends = arduino_base
-platform = platformio/espressif32@^6.3.2
+custom_esp32_kind = esp32
+platform = platformio/espressif32@6.7.0

 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/>
+  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/> -<mesh/raspihttp>

 upload_speed = 921600
 debug_init_break = tbreak setup
@@ -15,8 +16,10 @@ board_build.filesystem = littlefs
 # Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
 # See library directory for BLE logging possible values: .pio/libdeps/tbeam/NimBLE-Arduino/src/log_common/log_common.h
 # This overrides the BLE logging default of LOG_LEVEL_INFO (1) from: .pio/libdeps/tbeam/NimBLE-Arduino/src/esp_nimble_cfg.h
+build_unflags = -fno-lto
 build_flags =
  ${arduino_base.build_flags}
+  -flto
  -Wall
  -Wextra
  -Isrc/platform/esp32
@@ -28,7 +31,12 @@ build_flags =
  -DCONFIG_BT_NIMBLE_ENABLED
  -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
  -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
+  -DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=5120
  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
+  -DSERIAL_BUFFER_SIZE=4096
+  -DLIBPAX_ARDUINO
+  -DLIBPAX_WIFI
+  -DLIBPAX_BLE
  ;-DDEBUG_HEAP

 lib_deps =
@@ -36,8 +44,8 @@ lib_deps =
  ${networking_base.lib_deps}
  ${environmental_base.lib_deps}
  https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
-  h2zero/NimBLE-Arduino@^1.4.0
-  jgromes/RadioLib@^6.1.0
+  h2zero/NimBLE-Arduino@^1.4.1
+  https://github.com/dbSuS/libpax.git#7bcd3fcab75037505be9b122ab2b24cc5176b587
  https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
  https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f

@@ -1,5 +1,6 @@
 [esp32c3_base]
 extends = esp32_base
+custom_esp32_kind = esp32c3

 monitor_speed = 115200
 monitor_filters = esp32_c3_exception_decoder
@@ -1,16 +1,19 @@
 [esp32s2_base]
 extends = esp32_base
+custom_esp32_kind = esp32s2

 build_src_filter = 
-  ${esp32_base.build_src_filter} -<nimble/>
+ ${esp32_base.build_src_filter} - <libpax/> -<nimble/> -<mesh/raspihttp>

 monitor_speed = 115200

 build_flags =
  ${esp32_base.build_flags} 
  -DHAS_BLUETOOTH=0
+  -DMESHTASTIC_EXCLUDE_PAXCOUNTER
+  -DMESHTASTIC_EXCLUDE_BLUETOOTH
  
 lib_ignore = 
  ${esp32_base.lib_ignore} 
  NimBLE-Arduino
-
+  libpax
@@ -1,5 +1,6 @@
 [esp32s3_base]
 extends = esp32_base
+custom_esp32_kind = esp32s3

 monitor_speed = 115200

@@ -1,19 +1,21 @@
 [nrf52_base]
 ; Instead of the standard nordicnrf52 platform, we use our fork which has our added variant files
-platform = platformio/nordicnrf52@^10.0.0
+platform = platformio/nordicnrf52@^10.4.0
 extends = arduino_base

-build_type = debug ; I'm debugging with ICE a lot now
+build_type = debug
 build_flags = 
-  ${arduino_base.build_flags} -Wno-unused-variable 
+  ${arduino_base.build_flags}
+  -DSERIAL_BUFFER_SIZE=1024
+  -Wno-unused-variable
  -Isrc/platform/nrf52
+  -DLFS_NO_ASSERT                      ; Disable LFS assertions , see https://github.com/meshtastic/firmware/pull/3818

 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2040> -<mesh/eth/>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2040> -<mesh/eth/> -<mesh/raspihttp>

 lib_deps=
  ${arduino_base.lib_deps}
-  jgromes/RadioLib@^6.1.0

 lib_ignore =
  BluetoothOTA
@@ -1,6 +1,6 @@
 ; The Portduino based sim environment on top of any host OS, all hardware will be simulated
 [portduino_base]
-platform = https://github.com/meshtastic/platform-native.git#489ff929dca0bb768256ba2de45f95815111490f
+platform = https://github.com/meshtastic/platform-native.git#ad8112adf82ce1f5b917092cf32be07a077801a0
 framework = arduino

 build_src_filter = 
@@ -10,7 +10,9 @@ build_src_filter =
  -<platform/nrf52/> 
  -<platform/stm32wl/> 
  -<platform/rp2040>
+  -<mesh/wifi/>
  -<mesh/http/>
+  +<mesh/raspihttp/>
  -<mesh/eth/>
  -<modules/esp32>
  -<modules/Telemetry/EnvironmentTelemetry.cpp>
@@ -22,9 +24,14 @@ lib_deps =
  ${env.lib_deps}
  ${networking_base.lib_deps}
  rweather/Crypto@^0.4.0
-  jgromes/RadioLib@6.1.0
+  https://github.com/lovyan03/LovyanGFX.git#5a39989aa2c9492572255b22f033843ec8900233

 build_flags =
  ${arduino_base.build_flags}
  -fPIC
-  -Isrc/platform/portduino
+  -Isrc/platform/portduino
+  -DRADIOLIB_EEPROM_UNSUPPORTED
+  -DPORTDUINO_LINUX_HARDWARE
+  -lbluetooth
+  -lgpiod
+  -lyaml-cpp
@@ -1,8 +1,8 @@
 ; Common settings for rp2040 Processor based targets
 [rp2040_base]
-platform = https://github.com/maxgerhardt/platform-raspberrypi.git#0c33219f53faa035e188925ea1324f472e8b93d2
+platform = https://github.com/maxgerhardt/platform-raspberrypi.git#60d6ae81fcc73c34b1493ca9e261695e471bc0c2
 extends = arduino_base
-platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#3.2.2
+platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#3.7.2

 board_build.core = earlephilhower
 board_build.filesystem_size = 0.5m
@@ -12,7 +12,7 @@ build_flags =
  -D__PLAT_RP2040__
 #  -D _POSIX_THREADS
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<modules/esp32> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/> -<mesh/wifi/> -<mesh/http/> -<mesh/raspihttp>

 lib_ignore =
  BluetoothOTA
@@ -20,5 +20,4 @@ lib_ignore =
 lib_deps =
  ${arduino_base.lib_deps}
  ${environmental_base.lib_deps}
-  jgromes/RadioLib@^6.1.0
-  https://github.com/kokke/tiny-AES-c.git#f06ac37fc31dfdaca2e0d9bec83f90d5663c319b
+  rweather/Crypto
@@ -13,17 +13,16 @@ build_flags =
  -DVECT_TAB_OFFSET=0x08000000
  
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/Telemetry> -<platform/nrf52> -<platform/portduino> -<platform/rp2040>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/Telemetry> -<platform/nrf52> -<platform/portduino> -<platform/rp2040> -<mesh/raspihttp>

 board_upload.offset_address = 0x08000000
 upload_protocol = stlink

 lib_deps =
  ${env.lib_deps}
-  jgromes/RadioLib@^6.1.0
  https://github.com/kokke/tiny-AES-c.git#f06ac37fc31dfdaca2e0d9bec83f90d5663c319b
  https://github.com/littlefs-project/littlefs.git#v2.5.1
  https://github.com/stm32duino/STM32FreeRTOS.git#10.3.1

 lib_ignore =
-  https://github.com/mathertel/OneButton#2.1.0
+  mathertel/OneButton
@@ -2,8 +2,19 @@

 set -e

-VERSION=`bin/buildinfo.py long`
-SHORT_VERSION=`bin/buildinfo.py short`
+platformioFailed() {
+	[[ $VIRTUAL_ENV != "" ]] && exit 1 # don't hint at virtualenv if it's already in use
+	echo -e "\nThere were issues running platformio and you are not using a virtual environment." \
+		"\nYou may try setting up virtualenv and downloading the latest platformio from pip:" \
+		"\n\tvirtualenv venv" \
+		"\n\tsource venv/bin/activate" \
+		"\n\tpip install platformio" \
+		"\n\t./bin/build-native.sh # retry building"
+	exit 1
+}
+
+VERSION=$(bin/buildinfo.py long)
+SHORT_VERSION=$(bin/buildinfo.py short)

 OUTDIR=release/

@@ -13,11 +24,8 @@ mkdir -p $OUTDIR/
 rm -r $OUTDIR/* || true

 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg update 
-
-pio run --environment native
-cp .pio/build/native/program $OUTDIR/meshtasticd_linux_amd64
-
+platformio pkg update --environment native || platformioFailed
+pio run --environment native || platformioFailed
+cp .pio/build/native/program "$OUTDIR/meshtasticd_linux_$(uname -m)"
 cp bin/device-install.* $OUTDIR
 cp bin/device-update.* $OUTDIR
-
@@ -1,9 +1,8 @@
 #!/usr/bin/env python3
-import configparser
 import sys
+
 from readprops import readProps

-
-verObj = readProps('version.properties')
+verObj = readProps("version.properties")
 propName = sys.argv[1]
 print(f"{verObj[propName]}")
@@ -4,23 +4,23 @@

 set -e

-VERSION=`bin/buildinfo.py long`
+VERSION=$(bin/buildinfo.py long)

 # The shell vars the build tool expects to find
 export APP_VERSION=$VERSION

 if [[ $# -gt 0 ]]; then
-    # can override which environment by passing arg
-    BOARDS="$@"
+	# can override which environment by passing arg
+	BOARDS="$@"
 else
-    BOARDS="tlora-v2 tlora-v1 tlora_v1_3 tlora-v2-1-1.6 tbeam heltec-v1 heltec-v2.0 heltec-v2.1 tbeam0.7 meshtastic-diy-v1 rak4631 rak4631_eink rak11200 t-echo pca10059_diy_eink"
+	BOARDS="tlora-v2 tlora-v1 tlora_v1_3 tlora-v2-1-1.6 tbeam heltec-v2.0 heltec-v2.1 tbeam0.7 meshtastic-diy-v1 rak4631 rak4631_eink rak11200 t-echo canaryone pca10059_diy_eink"
 fi

 echo "BOARDS:${BOARDS}"

 CHECK=""
 for BOARD in $BOARDS; do
-     CHECK="${CHECK} -e ${BOARD}"
+	CHECK="${CHECK} -e ${BOARD}"
 done

-pio check --flags "-DAPP_VERSION=${APP_VERSION} --suppressions-list=suppressions.txt" $CHECK --skip-packages --pattern="src/" --fail-on-defect=low --fail-on-defect=medium --fail-on-defect=high
+pio check --flags "-DAPP_VERSION=${APP_VERSION} --suppressions-list=suppressions.txt" $CHECK --skip-packages --pattern="src/" --fail-on-defect=medium --fail-on-defect=high
@@ -5,17 +5,17 @@
 set -e

 if [[ $# -gt 0 ]]; then
-    # can override which environment by passing arg
-    BOARDS="$@"
+	# can override which environment by passing arg
+	BOARDS="$@"
 else
-    BOARDS="rak4631 rak4631_eink t-echo pca10059_diy_eink pico rak11200 tlora-v2 tlora-v1 tlora_v1_3 tlora-v2-1-1.6 tbeam heltec-v1 heltec-v2.0 heltec-v2.1 tbeam0.7 meshtastic-diy-v1 nano-g1 station-g1 m5stack-core m5stack-coreink tbeam-s3-core"
+	BOARDS="rak4631 rak4631_eink t-echo canaryone pca10059_diy_eink pico rak11200 tlora-v2 tlora-v1 tlora_v1_3 tlora-v2-1-1.6 tbeam heltec-v2.0 heltec-v2.1 tbeam0.7 meshtastic-diy-v1 nano-g1 station-g1 m5stack-core m5stack-coreink tbeam-s3-core"
 fi

 echo "BOARDS:${BOARDS}"

 CHECK=""
 for BOARD in $BOARDS; do
-     CHECK="${CHECK} -e ${BOARD}"
+	CHECK="${CHECK} -e ${BOARD}"
 done

 echo $CHECK
@@ -0,0 +1,144 @@
+### Define your devices here using Broadcom pin numbering
+### Uncomment the block that corresponds to your hardware
+### Including the "Module:" line!
+---
+Lora:
+#  Module: sx1262  # Waveshare SX126X XXXM
+#  DIO2_AS_RF_SWITCH: true
+#  CS: 21
+#  IRQ: 16
+#  Busy: 20
+#  Reset: 18
+
+#  Module: sx1262  # Waveshare SX1302 LISTEN ONLY AT THIS TIME!
+#  CS: 7
+#  IRQ: 17
+#  Reset: 22
+
+#  Module: sx1262  # pinedio
+#  CS: 0
+#  IRQ: 10
+#  Busy: 11
+#  spidev: spidev0.1
+
+#  Module: RF95  # Adafruit RFM9x
+#  Reset: 25
+#  CS: 7
+#  IRQ: 22
+#  Busy: 23
+
+#  Module: RF95  # Elecrow Lora RFM95 IOT https://www.elecrow.com/lora-rfm95-iot-board-for-rpi.html
+#  Reset: 22
+#  CS: 7
+#  IRQ: 25
+
+#  Module: sx1280  # SX1280
+#  CS: 21
+#  IRQ: 16
+#  Busy: 20
+#  Reset: 18
+
+#  Module: sx1268  # SX1268-based modules, tested with Ebyte E22 400M33S
+#  CS: 21
+#  IRQ: 16
+#  Busy: 20
+#  Reset: 18
+#  TXen: 6
+#  RXen: 12
+#  DIO3_TCXO_VOLTAGE: true
+
+#  DIO3_TCXO_VOLTAGE: true  # the Waveshare Core1262 and others are known to need this setting
+
+#  TXen: x  # TX and RX enable pins
+#  RXen: x
+
+#  ch341_quirk: true # Uncomment this to use the chunked SPI transfer that seems to fix the ch341
+
+### Set gpio chip to use in /dev/. Defaults to 0.
+### Notably the Raspberry Pi 5 puts the GPIO header on gpiochip4
+#  gpiochip: 4
+
+### Specify the SPI device to use in /dev/. Defaults to spidev0.0
+### Some devices, like the pinedio, may require spidev0.1 as a workaround.
+#  spidev: spidev0.0
+
+### Define GPIO buttons here:
+
+GPIO:
+#  User: 6
+
+### Define GPS
+
+GPS:
+#  SerialPath: /dev/ttyS0
+
+### Specify I2C device, or leave blank for none
+
+I2C:
+#  I2CDevice: /dev/i2c-1
+
+### Set up SPI displays here. Note that I2C displays are generally auto-detected.
+
+Display:
+
+### Waveshare 2.8inch RPi LCD
+#  Panel: ST7789
+#  CS: 8
+#  DC: 22        # Data/Command pin
+#  Backlight: 18
+#  Width: 240
+#  Height: 320
+#  Reset: 27
+#  Rotate: true
+#  Invert: true
+
+### Waveshare 1.44inch LCD HAT
+#  Panel: ST7735S
+#  CS: 8         #Chip Select
+#  DC: 25        # Data/Command pin
+#  Backlight: 24
+#  Width: 128
+#  Height: 128
+#  Reset: 27
+#  OffsetX: 0
+#  OffsetY: 0
+
+### Adafruit PiTFT 2.8 TFT+Touchscreen
+#  Panel: ILI9341
+#  CS: 8
+#  DC: 25
+#  Width: 240
+#  Height: 320
+#  Rotate: true
+
+Touchscreen:
+### Note, at least for now, the touchscreen must have a CS pin defined, even if you let Linux manage the CS switching.
+
+#  Module: STMPE610 # Option 1 for Adafruit PiTFT 2.8
+#  CS: 7
+#  IRQ: 24
+
+#  Module: FT5x06 # Option 2 for Adafruit PiTFT 2.8
+#  IRQ: 24
+#  I2CAddr: 0x38
+
+#  Module: XPT2046 # Waveshare 2.8inch
+#  CS: 7
+#  IRQ: 17
+
+### Configure device for direct keyboard input
+
+Input:
+#  KeyboardDevice: /dev/input/by-id/usb-_Raspberry_Pi_Internal_Keyboard-event-kbd
+
+###
+
+Logging:
+  LogLevel: info # debug, info, warn, error
+
+Webserver:
+#  Port: 443 # Port for Webserver & Webservices
+#  RootPath: /usr/share/doc/meshtasticd/web # Root Dir of WebServer
+
+General:
+  MaxNodes: 200
@@ -31,9 +31,13 @@ IF EXIST %FILENAME% IF x%FILENAME:update=%==x%FILENAME% (
 	%PYTHON% -m esptool --baud 115200 erase_flash
 	%PYTHON% -m esptool --baud 115200 write_flash 0x00 %FILENAME%
    
-    @REM Account for S3 board's different OTA partition
-    IF x%FILENAME:s3=%==x%FILENAME% IF x%FILENAME:v3=%==x%FILENAME% (
-        %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota.bin
+    @REM Account for S3 and C3 board's different OTA partition
+    IF x%FILENAME:s3=%==x%FILENAME% IF x%FILENAME:v3=%==x%FILENAME% IF x%FILENAME:t-deck=%==x%FILENAME% IF x%FILENAME:wireless-paper=%==x%FILENAME% IF x%FILENAME:wireless-tracker=%==x%FILENAME% IF x%FILENAME:station-g2=%==x%FILENAME% IF x%FILENAME:unphone=%==x%FILENAME% (
+        IF x%FILENAME:esp32c3=%==x%FILENAME% (
+            %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota.bin
+        ) else (
+            %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota-c3.bin
+        )
 	) else (
        %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota-s3.bin
    )
@@ -1,12 +1,12 @@
 #!/bin/sh

-PYTHON=${PYTHON:-$(which python3 python|head -n 1)}
+PYTHON=${PYTHON:-$(which python3 python | head -n 1)}

 set -e

 # Usage info
 show_help() {
-cat << EOF
+	cat <<EOF
 Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME]
 Flash image file to device, but first erasing and writing system information"

@@ -18,44 +18,50 @@ Flash image file to device, but first erasing and writing system information"
 EOF
 }

-
 while getopts ":hp:P:f:" opt; do
-    case "${opt}" in
-        h)
-            show_help
-            exit 0
-            ;;
-        p)  export ESPTOOL_PORT=${OPTARG}
-	    ;;
-        P)  PYTHON=${OPTARG}
-            ;;
-        f)  FILENAME=${OPTARG}
-            ;;
-        *)
- 	    echo "Invalid flag."
-            show_help >&2
-            exit 1
-            ;;
-    esac
+	case "${opt}" in
+	h)
+		show_help
+		exit 0
+		;;
+	p)
+		export ESPTOOL_PORT=${OPTARG}
+		;;
+	P)
+		PYTHON=${OPTARG}
+		;;
+	f)
+		FILENAME=${OPTARG}
+		;;
+	*)
+		echo "Invalid flag."
+		show_help >&2
+		exit 1
+		;;
+	esac
 done
-shift "$((OPTIND-1))"
+shift "$((OPTIND - 1))"

 [ -z "$FILENAME" -a -n "$1" ] && {
-    FILENAME=$1
-    shift
+	FILENAME=$1
+	shift
 }

-if [ -f "${FILENAME}" ] && [ ! -z "${FILENAME##*"update"*}" ]; then
+if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
 	echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
-	"$PYTHON" -m esptool  erase_flash
-	"$PYTHON" -m esptool  write_flash 0x00 ${FILENAME}
+	"$PYTHON" -m esptool erase_flash
+	"$PYTHON" -m esptool write_flash 0x00 ${FILENAME}
 	# Account for S3 board's different OTA partition
-	if [ ! -z "${FILENAME##*"s3"*}" ] && [ ! -z "${FILENAME##*"-v3"*}" ]; then
-		"$PYTHON" -m esptool  write_flash 0x260000 bleota.bin
+	if [ -n "${FILENAME##*"s3"*}" ] && [ -n "${FILENAME##*"-v3"*}" ] && [ -n "${FILENAME##*"t-deck"*}" ] && [ -n "${FILENAME##*"wireless-paper"*}" ] && [ -n "${FILENAME##*"wireless-tracker"*}" ] && [ -n "${FILENAME##*"station-g2"*}" ] && [ -n "${FILENAME##*"unphone"*}" ]; then
+		if [ -n "${FILENAME##*"esp32c3"*}" ]; then
+			"$PYTHON" -m esptool write_flash 0x260000 bleota.bin
+		else
+			"$PYTHON" -m esptool write_flash 0x260000 bleota-c3.bin
+		fi
 	else
-	    "$PYTHON" -m esptool  write_flash 0x260000 bleota-s3.bin
+		"$PYTHON" -m esptool write_flash 0x260000 bleota-s3.bin
 	fi
-	"$PYTHON" -m esptool  write_flash 0x300000 littlefs-*.bin
+	"$PYTHON" -m esptool write_flash 0x300000 littlefs-*.bin

 else
 	show_help
@@ -11,19 +11,22 @@ Meshtastic notes:
 * version that's checked into meshtastic repo is based on: https://github.com/me21/EspArduinoExceptionDecoder
  which adds in ESP32 Backtrace decoding.
 * this also updates the defaults to use ESP32, instead of ESP8266 and defaults to the built firmware.bin
+* also updated the toolchain name, which will be set according to the platform

 To use, copy the "Backtrace: 0x...." line to a file, e.g., backtrace.txt, then run:
 $ bin/exception_decoder.py backtrace.txt
+For a platform other than ESP32, use the -p option, e.g.:
+$ bin/exception_decoder.py -p ESP32S3 backtrace.txt
+To specify a specific .elf file, use the -e option, e.g.:
+$ bin/exception_decoder.py -e firmware.elf backtrace.txt
 """

 import argparse
+import os
 import re
 import subprocess
-from collections import namedtuple
-
 import sys
-
-import os
+from collections import namedtuple

 EXCEPTIONS = [
    "Illegal instruction",
@@ -55,24 +58,39 @@ EXCEPTIONS = [
    "LoadStorePrivilege: A load or store referenced a virtual address at a ring level less than CRING",
    "reserved",
    "LoadProhibited: A load referenced a page mapped with an attribute that does not permit loads",
-    "StoreProhibited: A store referenced a page mapped with an attribute that does not permit stores"
+    "StoreProhibited: A store referenced a page mapped with an attribute that does not permit stores",
 ]

 PLATFORMS = {
-    "ESP8266": "lx106",
-    "ESP32": "esp32"
+    "ESP8266": "xtensa-lx106",
+    "ESP32": "xtensa-esp32",
+    "ESP32S3": "xtensa-esp32s3",
+    "ESP32C3": "riscv32-esp",
+}
+TOOLS = {
+    "ESP8266": "xtensa",
+    "ESP32": "xtensa-esp32",
+    "ESP32S3": "xtensa-esp32s3",
+    "ESP32C3": "riscv32-esp",
 }

-BACKTRACE_REGEX = re.compile(r"(?:\s+(0x40[0-2](?:\d|[a-f]|[A-F]){5}):0x(?:\d|[a-f]|[A-F]){8})\b")
+BACKTRACE_REGEX = re.compile(
+    r"(?:\s+(0x40[0-2](?:\d|[a-f]|[A-F]){5}):0x(?:\d|[a-f]|[A-F]){8})\b"
+)
 EXCEPTION_REGEX = re.compile("^Exception \\((?P<exc>[0-9]*)\\):$")
-COUNTER_REGEX = re.compile('^epc1=(?P<epc1>0x[0-9a-f]+) epc2=(?P<epc2>0x[0-9a-f]+) epc3=(?P<epc3>0x[0-9a-f]+) '
-                           'excvaddr=(?P<excvaddr>0x[0-9a-f]+) depc=(?P<depc>0x[0-9a-f]+)$')
+COUNTER_REGEX = re.compile(
+    "^epc1=(?P<epc1>0x[0-9a-f]+) epc2=(?P<epc2>0x[0-9a-f]+) epc3=(?P<epc3>0x[0-9a-f]+) "
+    "excvaddr=(?P<excvaddr>0x[0-9a-f]+) depc=(?P<depc>0x[0-9a-f]+)$"
+)
 CTX_REGEX = re.compile("^ctx: (?P<ctx>.+)$")
-POINTER_REGEX = re.compile('^sp: (?P<sp>[0-9a-f]+) end: (?P<end>[0-9a-f]+) offset: (?P<offset>[0-9a-f]+)$')
-STACK_BEGIN = '>>>stack>>>'
-STACK_END = '<<<stack<<<'
+POINTER_REGEX = re.compile(
+    "^sp: (?P<sp>[0-9a-f]+) end: (?P<end>[0-9a-f]+) offset: (?P<offset>[0-9a-f]+)$"
+)
+STACK_BEGIN = ">>>stack>>>"
+STACK_END = "<<<stack<<<"
 STACK_REGEX = re.compile(
-    '^(?P<off>[0-9a-f]+):\W+(?P<c1>[0-9a-f]+) (?P<c2>[0-9a-f]+) (?P<c3>[0-9a-f]+) (?P<c4>[0-9a-f]+)(\W.*)?$')
+    "^(?P<off>[0-9a-f]+):\W+(?P<c1>[0-9a-f]+) (?P<c2>[0-9a-f]+) (?P<c3>[0-9a-f]+) (?P<c4>[0-9a-f]+)(\W.*)?$"
+)

 StackLine = namedtuple("StackLine", ["offset", "content"])

@@ -96,15 +114,18 @@ class ExceptionDataParser(object):
        self.stack = []

    def _parse_backtrace(self, line):
-        if line.startswith('Backtrace:'):
-            self.stack = [StackLine(offset=0, content=(addr,)) for addr in BACKTRACE_REGEX.findall(line)]
+        if line.startswith("Backtrace:"):
+            self.stack = [
+                StackLine(offset=0, content=(addr,))
+                for addr in BACKTRACE_REGEX.findall(line)
+            ]
            return None
        return self._parse_backtrace

    def _parse_exception(self, line):
        match = EXCEPTION_REGEX.match(line)
        if match is not None:
-            self.exception = int(match.group('exc'))
+            self.exception = int(match.group("exc"))
            return self._parse_counters
        return self._parse_exception

@@ -144,14 +165,22 @@ class ExceptionDataParser(object):
        if line != STACK_END:
            match = STACK_REGEX.match(line)
            if match is not None:
-                self.stack.append(StackLine(offset=match.group("off"),
-                                            content=(match.group("c1"), match.group("c2"), match.group("c3"),
-                                                     match.group("c4"))))
+                self.stack.append(
+                    StackLine(
+                        offset=match.group("off"),
+                        content=(
+                            match.group("c1"),
+                            match.group("c2"),
+                            match.group("c3"),
+                            match.group("c4"),
+                        ),
+                    )
+                )
            return self._parse_stack_line
        return None

    def parse_file(self, file, platform, stack_only=False):
-        if platform == 'ESP32':
+        if platform != "ESP8266":
            func = self._parse_backtrace
        else:
            func = self._parse_exception
@@ -175,7 +204,9 @@ class AddressResolver(object):
        self._address_map = {}

    def _lookup(self, addresses):
-        cmd = [self._tool, "-aipfC", "-e", self._elf] + [addr for addr in addresses if addr is not None]
+        cmd = [self._tool, "-aipfC", "-e", self._elf] + [
+            addr for addr in addresses if addr is not None
+        ]

        if sys.version_info[0] < 3:
            output = subprocess.check_output(cmd)
@@ -190,19 +221,27 @@ class AddressResolver(object):
            match = line_regex.match(line)

            if match is None:
-                if last is not None and line.startswith('(inlined by)'):
-                    line = line [12:].strip()
-                    self._address_map[last] += ("\n  \-> inlined by: " + line)
+                if last is not None and line.startswith("(inlined by)"):
+                    line = line[12:].strip()
+                    self._address_map[last] += "\n  \-> inlined by: " + line
                continue

-            if match.group("result") == '?? ??:0':
+            if match.group("result") == "?? ??:0":
                continue

            self._address_map[match.group("addr")] = match.group("result")
            last = match.group("addr")

    def fill(self, parser):
-        addresses = [parser.epc1, parser.epc2, parser.epc3, parser.excvaddr, parser.sp, parser.end, parser.offset]
+        addresses = [
+            parser.epc1,
+            parser.epc2,
+            parser.epc3,
+            parser.excvaddr,
+            parser.sp,
+            parser.end,
+            parser.offset,
+        ]
        for line in parser.stack:
            addresses.extend(line.content)

@@ -257,8 +296,10 @@ def print_stack(lines, resolver):


 def print_result(parser, resolver, platform, full=True, stack_only=False):
-    if platform == 'ESP8266' and not stack_only:
-        print('Exception: {} ({})'.format(parser.exception, EXCEPTIONS[parser.exception]))
+    if platform == "ESP8266" and not stack_only:
+        print(
+            "Exception: {} ({})".format(parser.exception, EXCEPTIONS[parser.exception])
+        )

        print("")
        print_addr("epc1", parser.epc1, resolver)
@@ -285,15 +326,33 @@ def print_result(parser, resolver, platform, full=True, stack_only=False):
 def parse_args():
    parser = argparse.ArgumentParser(description="decode ESP Stacktraces.")

-    parser.add_argument("-p", "--platform", help="The platform to decode from", choices=PLATFORMS.keys(),
-                        default="ESP32")
-    parser.add_argument("-t", "--tool", help="Path to the xtensa toolchain",
-                        default="~/.platformio/packages/toolchain-xtensa32/")
-    parser.add_argument("-e", "--elf", help="path to elf file",
-                        default=".pio/build/esp32/firmware.elf")
-    parser.add_argument("-f", "--full", help="Print full stack dump", action="store_true")
-    parser.add_argument("-s", "--stack_only", help="Decode only a stractrace", action="store_true")
-    parser.add_argument("file", help="The file to read the exception data from ('-' for STDIN)", default="-")
+    parser.add_argument(
+        "-p",
+        "--platform",
+        help="The platform to decode from",
+        choices=PLATFORMS.keys(),
+        default="ESP32",
+    )
+    parser.add_argument(
+        "-t",
+        "--tool",
+        help="Path to the toolchain (without specific platform)",
+        default="~/.platformio/packages/toolchain-",
+    )
+    parser.add_argument(
+        "-e", "--elf", help="path to elf file", default=".pio/build/tbeam/firmware.elf"
+    )
+    parser.add_argument(
+        "-f", "--full", help="Print full stack dump", action="store_true"
+    )
+    parser.add_argument(
+        "-s", "--stack_only", help="Decode only a stractrace", action="store_true"
+    )
+    parser.add_argument(
+        "file",
+        help="The file to read the exception data from ('-' for STDIN)",
+        default="-",
+    )

    return parser.parse_args()

@@ -309,10 +368,12 @@ if __name__ == "__main__":
            sys.exit(1)
        file = open(args.file, "r")

-    addr2line = os.path.join(os.path.abspath(os.path.expanduser(args.tool)),
-                             "bin/xtensa-" + PLATFORMS[args.platform] + "-elf-addr2line")
-    if os.name == 'nt':
-        addr2line += '.exe'
+    addr2line = os.path.join(
+        os.path.abspath(os.path.expanduser(args.tool + TOOLS[args.platform])),
+        "bin/" + PLATFORMS[args.platform] + "-elf-addr2line",
+    )
+    if os.name == "nt":
+        addr2line += ".exe"
    if not os.path.exists(addr2line):
        print("ERROR: addr2line not found (" + addr2line + ")")

@@ -1,6 +1,6 @@
 #!/usr/bin/env python

-"""Generate the CI matrix"""
+"""Generate the CI matrix."""

 import configparser
 import json
@@ -34,5 +34,10 @@ for subdir, dirs, files in os.walk(rootdir):
                                    outlist.append(section)
                            else:
                                outlist.append(section)
+                    if "board_check" in config[config[c].name]:
+                        if (config[config[c].name]["board_check"] == "true") & (
+                            "check" in options
+                        ):
+                            outlist.append(section)

 print(json.dumps(outlist))
@@ -0,0 +1,12 @@
+[Unit]
+Description=Meshtastic Native Daemon
+After=network-online.target
+
+[Service]
+User=root
+Group=root
+Type=simple
+ExecStart=/usr/sbin/meshtasticd
+
+[Install]
+WantedBy=multi-user.target
@@ -0,0 +1,10 @@
+#!/usr/bin/env bash
+
+cp "release/meshtasticd_linux_$(uname -m)" /usr/sbin/meshtasticd
+mkdir /etc/meshtasticd
+if [[ -f "/etc/meshtasticd/config.yaml" ]]; then
+	cp bin/config-dist.yaml /etc/meshtasticd/config-upgrade.yaml
+else
+	cp bin/config-dist.yaml /etc/meshtasticd/config.yaml
+fi
+cp bin/meshtasticd.service /usr/lib/systemd/system/meshtasticd.service
@@ -1,13 +1,14 @@
-import subprocess
-import configparser
-import traceback
+# trunk-ignore-all(ruff/F821)
+# trunk-ignore-all(flake8/F821): For SConstruct imports
 import sys
 from os.path import join
+
 from readprops import readProps

 Import("env")
 platform = env.PioPlatform()

+
 def esp32_create_combined_bin(source, target, env):
    # this sub is borrowed from ESPEasy build toolchain. It's licensed under GPL V3
    # https://github.com/letscontrolit/ESPEasy/blob/mega/tools/pio/post_esp32.py
@@ -20,8 +21,8 @@ def esp32_create_combined_bin(source, target, env):
    firmware_name = env.subst("$BUILD_DIR/${PROGNAME}.bin")
    chip = env.get("BOARD_MCU")
    flash_size = env.BoardConfig().get("upload.flash_size")
-    flash_freq = env.BoardConfig().get("build.f_flash", '40m')
-    flash_freq = flash_freq.replace('000000L', 'm')
+    flash_freq = env.BoardConfig().get("build.f_flash", "40m")
+    flash_freq = flash_freq.replace("000000L", "m")
    flash_mode = env.BoardConfig().get("build.flash_mode", "dio")
    memory_type = env.BoardConfig().get("build.arduino.memory_type", "qio_qspi")
    if flash_mode == "qio" or flash_mode == "qout":
@@ -51,23 +52,42 @@ def esp32_create_combined_bin(source, target, env):
    print(f" - {hex(app_offset)} | {firmware_name}")
    cmd += [hex(app_offset), firmware_name]

-    print('Using esptool.py arguments: %s' % ' '.join(cmd))
+    print("Using esptool.py arguments: %s" % " ".join(cmd))

    esptool.main(cmd)

-if (platform.name == "espressif32"):
+
+if platform.name == "espressif32":
    sys.path.append(join(platform.get_package_dir("tool-esptoolpy")))
    import esptool
-    env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", esp32_create_combined_bin)    
+
+    env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", esp32_create_combined_bin)
+
+    esp32_kind = env.GetProjectOption("custom_esp32_kind")
+    if esp32_kind == "esp32":
+        # Free up some IRAM by removing auxiliary SPI flash chip drivers.
+        # Wrapped stub symbols are defined in src/platform/esp32/iram-quirk.c.
+        env.Append(
+            LINKFLAGS=[
+                "-Wl,--wrap=esp_flash_chip_gd",
+                "-Wl,--wrap=esp_flash_chip_issi",
+                "-Wl,--wrap=esp_flash_chip_winbond",
+            ]
+        )
+    else:
+        # For newer ESP32 targets, using newlib nano works better.
+        env.Append(LINKFLAGS=["--specs=nano.specs", "-u", "_printf_float"])

 Import("projenv")

 prefsLoc = projenv["PROJECT_DIR"] + "/version.properties"
 verObj = readProps(prefsLoc)
-print("Using meshtastic platformio-custom.py, firmware version " + verObj['long'])
+print("Using meshtastic platformio-custom.py, firmware version " + verObj["long"])

 # General options that are passed to the C and C++ compilers
-projenv.Append(CCFLAGS=[
-    "-DAPP_VERSION=" + verObj['long'],
-    "-DAPP_VERSION_SHORT=" + verObj['short']    
-])
+projenv.Append(
+    CCFLAGS=[
+        "-DAPP_VERSION=" + verObj["long"],
+        "-DAPP_VERSION_SHORT=" + verObj["short"],
+    ]
+)
@@ -1 +1 @@
-cd protobufs && ..\nanopb-0.4.7\generator-bin\protoc.exe --experimental_allow_proto3_optional --nanopb_out=-v:..\src\mesh\generated -I=..\protobufs ..\protobufs\meshtastic\*.proto
+cd protobufs && ..\nanopb-0.4.8\generator-bin\protoc.exe --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:..\src\mesh\generated" -I=..\protobufs\ ..\protobufs\meshtastic\*.proto
@@ -2,19 +2,10 @@

 set -e

-echo "This script requires https://jpa.kapsi.fi/nanopb/download/ version 0.4.7 to be located in the"
+echo "This script requires https://jpa.kapsi.fi/nanopb/download/ version 0.4.8 to be located in the"
 echo "firmware root directory if the following step fails, you should download the correct"
-echo "prebuilt binaries for your computer into nanopb-0.4.7"
+echo "prebuilt binaries for your computer into nanopb-0.4.8"

 # the nanopb tool seems to require that the .options file be in the current directory!
 cd protobufs
-../nanopb-0.4.7/generator-bin/protoc --nanopb_out=-v:../src/mesh/generated/ -I=../protobufs meshtastic/*.proto --experimental_allow_proto3_optional
-
-# cd ../src/mesh/generated/meshtastic
-# sed -i 's/#include "meshtastic/#include "./g' -- *
-
-# sed -i 's/meshtastic_//g' -- *
-
-#echo "Regenerating protobuf documentation - if you see an error message"
-#echo "you can ignore it unless doing a new protobuf release to github."
-#bin/regen-docs.sh
+../nanopb-0.4.8/generator-bin/protoc --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:../src/mesh/generated/" -I=../protobufs meshtastic/*.proto
@@ -0,0 +1,38 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-D CDEBYTE_EORA_S3",
+      "-D ARDUINO_USB_CDC_ON_BOOT=1",
+      "-D ARDUINO_USB_MODE=0",
+      "-D ARDUINO_RUNNING_CORE=1",
+      "-D ARDUINO_EVENT_RUNNING_CORE=1",
+      "-D BOARD_HAS_PSRAM"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "dio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "CDEBYTE_EoRa-S3"
+  },
+  "connectivity": ["wifi"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "CDEBYTE EoRa-S3",
+  "upload": {
+    "flash_size": "4MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 4194304,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://www.cdebyte.com/Module-Testkits-EoRaPI",
+  "vendor": "CDEBYTE"
+}
@@ -0,0 +1,39 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-D ARDUINO_USB_CDC_ON_BOOT=0",
+      "-D ARDUINO_USB_MSC_ON_BOOT=0",
+      "-D ARDUINO_USB_DFU_ON_BOOT=0",
+      "-D ARDUINO_USB_MODE=0",
+      "-D ARDUINO_RUNNING_CORE=1",
+      "-D ARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "ESP32-S3-WROOM-1-N4"
+  },
+  "connectivity": ["wifi"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "ESP32-S3-WROOM-1-N4 (4 MB Flash, No PSRAM)",
+  "upload": {
+    "flash_size": "4MB",
+    "maximum_ram_size": 524288,
+    "maximum_size": 4194304,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://www.espressif.com/sites/default/files/documentation/esp32-s3-wroom-1_wroom-1u_datasheet_en.pdf",
+  "vendor": "Espressif"
+}
@@ -28,8 +28,6 @@
    "flash_size": "8MB",
    "maximum_ram_size": 327680,
    "maximum_size": 8388608,
-    "use_1200bps_touch": true,
-    "wait_for_upload_port": true,
    "require_upload_port": true,
    "speed": 921600
  },
@@ -0,0 +1,52 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_CANARY -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x4405"],
+      ["0x239A", "0x009F"]
+    ],
+    "usb_product": "CanaryOne",
+    "mcu": "nrf52840",
+    "variant": "canaryone",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "Canary (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://canaryradio.io/",
+  "vendor": "Canary Radio Company"
+}
@@ -29,7 +29,8 @@
  "debug": {
    "jlink_device": "nRF52840_xxAA",
    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd"
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
  },
  "frameworks": ["arduino"],
  "name": "TTGO eink (Adafruit BSP)",
@@ -0,0 +1,40 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "partitions": "default_16MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DARDUINO_ESP32S3_DEV",
+      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "esp32s3"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "Waveshare ESP32-S3-Pico (16 MB FLASH, 2 MB PSRAM)",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 16777216,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://www.waveshare.com/esp32-s3-pico.htm",
+  "vendor": "Waveshare"
+}
@@ -0,0 +1,38 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "partitions": "default_8MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DHELTEC_WIRELESS_TRACKER",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "heltec_wireless_tracker"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "Heltec Wireless Tracker",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8388608,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://heltec.org/project/wireless-tracker/",
+  "vendor": "Heltec"
+}
@@ -29,7 +29,8 @@
  "debug": {
    "jlink_device": "nRF52840_xxAA",
    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd"
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
  },
  "frameworks": ["arduino"],
  "name": "Meshtastic Lora Relay V1 (Adafruit BSP)",
@@ -29,7 +29,8 @@
  "debug": {
    "jlink_device": "nRF52840_xxAA",
    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd"
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
  },
  "frameworks": ["arduino"],
  "name": "Meshtastic Lora Relay V1 (Adafruit BSP)",
@@ -22,7 +22,8 @@
  "connectivity": ["bluetooth"],
  "debug": {
    "jlink_device": "nRF52832_xxAA",
-    "svd_path": "nrf52.svd"
+    "svd_path": "nrf52.svd",
+    "openocd_target": "nrf52840-mdk-rs"
  },
  "frameworks": ["arduino"],
  "name": "lora ISP4520",
@@ -0,0 +1,51 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"]
+    ],
+    "usb_product": "BQ nRF52840",
+    "mcu": "nrf52840",
+    "variant": "nano-g2-ultra",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "BQ nRF52840",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://wiki.uniteng.com/en/meshtastic/nano-g2-ultra",
+  "vendor": "BQ Consulting"
+}
@@ -32,7 +32,8 @@
  "connectivity": ["bluetooth"],
  "debug": {
    "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd"
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
  },
  "frameworks": ["arduino"],
  "name": "nRF52840 Dongle",
@@ -29,7 +29,8 @@
  "debug": {
    "jlink_device": "nRF52840_xxAA",
    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd"
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
  },
  "frameworks": ["arduino"],
  "name": "A modified NRF52840-DK devboard (Adafruit BSP)",
@@ -29,7 +29,8 @@
  "debug": {
    "jlink_device": "nRF52840_xxAA",
    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd"
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
  },
  "frameworks": ["arduino"],
  "name": "A modified NRF52840-DK devboard (Adafruit BSP)",
@@ -29,7 +29,8 @@
  "debug": {
    "jlink_device": "nRF52840_xxAA",
    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd"
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
  },
  "frameworks": ["arduino"],
  "name": "Meshtastic PPR (Adafruit BSP)",
@@ -29,7 +29,8 @@
  "debug": {
    "jlink_device": "nRF52833_xxAA",
    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52833.svd"
+    "svd_path": "nrf52833.svd",
+    "openocd_target": "nrf52840-mdk-rs"
  },
  "frameworks": ["arduino"],
  "name": "Meshtastic PPR1 (Adafruit BSP)",
@@ -0,0 +1,52 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x00B3"],
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"]
+    ],
+    "usb_product": "ProMicro compatible nRF52840",
+    "mcu": "nrf52840",
+    "variant": "promicro_diy",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "ProMicro compatible nRF52840",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["nrfutil", "jlink", "nrfjprog", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://www.nologo.tech/product/otherboard/NRF52840.html",
+  "vendor": "Nologo"
+}
@@ -0,0 +1,41 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "memory_type": "qio_opi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=0"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "station-g2"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "BQ Station G2",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 16777216,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://wiki.uniteng.com/en/meshtastic/station-g2",
+  "vendor": "BQ Consulting"
+}
@@ -0,0 +1,41 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "memory_type": "qio_opi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=0"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "t-deck"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "Espressif Systems LilyGO T-Deck (16 MB FLASH, 8 MB PSRAM)",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 16777216,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://www.lilygo.cc/en-pl/products/t-deck",
+  "vendor": "LilyGO"
+}
@@ -7,7 +7,11 @@
    "cpu": "cortex-m4",
    "extra_flags": "-DARDUINO_NRF52840_TTGO_EINK -DNRF52840_XXAA",
    "f_cpu": "64000000L",
-    "hwids": [["0x239A", "0x4405"]],
+    "hwids": [
+      ["0x239A", "0x4405"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"]
+    ],
    "usb_product": "TTGO_eink",
    "mcu": "nrf52840",
    "variant": "t-echo",
@@ -29,7 +33,8 @@
  "debug": {
    "jlink_device": "nRF52840_xxAA",
    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd"
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
  },
  "frameworks": ["arduino"],
  "name": "TTGO eink (Adafruit BSP)",
@@ -0,0 +1,43 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "memory_type": "qio_opi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DT_WATCH_S3",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [
+      ["0x303A", "0x1001"],
+      ["0x303A", "0x0002"]
+    ],
+    "mcu": "esp32s3",
+    "variant": "t-watch-s3"
+  },
+  "connectivity": ["wifi"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino"],
+  "name": "LilyGo T-Watch 2020 V3",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8388608,
+    "require_upload_port": true,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://www.lilygo.cc/en-pl/products/t-watch-s3",
+  "vendor": "LilyGo"
+}
@@ -15,7 +15,7 @@
    "f_cpu": "240000000L",
    "f_flash": "80000000L",
    "flash_mode": "dio",
-    "hwids": [["0X303A", "0x1001"]],
+    "hwids": [["0x303A", "0x1001"]],
    "mcu": "esp32s3",
    "variant": "tbeam-s3-core"
  },
@@ -0,0 +1,58 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_WIO_WM1110 -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"]
+    ],
+    "usb_product": "WIO-BOOT",
+    "mcu": "nrf52840",
+    "variant": "Seeed_WIO_WM1110",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "Seeed WIO WM1110",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink",
+      "cmsis-dap",
+      "blackmagic"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://www.seeedstudio.com/Wio-WM1110-Dev-Kit-p-5677.html",
+  "vendor": "Seeed Studio"
+}
@@ -0,0 +1,58 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_WIO_WM1110 -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"]
+    ],
+    "usb_product": "WIO-BOOT",
+    "mcu": "nrf52840",
+    "variant": "Seeed_WIO_WM1110",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "Seeed WIO WM1110",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink",
+      "cmsis-dap",
+      "blackmagic"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://www.seeedstudio.com/Wio-WM1110-Dev-Kit-p-5677.html",
+  "vendor": "Seeed Studio"
+}
@@ -0,0 +1,34 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32_out.ld",
+      "partitions": "default_16MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DARDUINO_WIPHONE14",
+      "-DBOARD_HAS_PSRAM",
+      "-mfix-esp32-psram-cache-issue",
+      "-mfix-esp32-psram-cache-strategy=memw"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "40000000L",
+    "flash_mode": "dio",
+    "mcu": "esp32",
+    "variant": "wiphone",
+    "board": "WiPhone"
+  },
+  "connectivity": ["wifi", "bluetooth"],
+  "frameworks": ["arduino", "espidf"],
+  "name": "WIPhone Integrated 1.4",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 532480,
+    "maximum_size": 6553600,
+    "maximum_data_size": 4521984,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://www.wiphone.io/",
+  "vendor": "HackEDA"
+}
@@ -4,7 +4,7 @@
      "ldscript": "esp32_out.ld"
    },
    "core": "esp32",
-    "extra_flags": "-DARDUINO_ESP32_DEV",
+    "extra_flags": ["-DBOARD_HAS_PSRAM", "-DARDUINO_ESP32_DEV"],
    "f_cpu": "240000000L",
    "f_flash": "40000000L",
    "flash_mode": "dio",
@@ -32,7 +32,8 @@
  "connectivity": ["bluetooth"],
  "debug": {
    "jlink_device": "nRF52832_xxAA",
-    "svd_path": "nrf52.svd"
+    "svd_path": "nrf52.svd",
+    "openocd_target": "nrf52840-mdk-rs"
  },
  "frameworks": ["arduino", "zephyr"],
  "name": "Adafruit Bluefruit nRF52832 Feather",
@@ -32,7 +32,8 @@
  "connectivity": ["bluetooth"],
  "debug": {
    "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd"
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
  },
  "frameworks": ["arduino"],
  "name": "WisCore RAK4631 Board",
@@ -0,0 +1,58 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v7.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_MDBT50Q_RX -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x810B"],
+      ["0x239A", "0x010B"],
+      ["0x239A", "0x810C"]
+    ],
+    "usb_product": "XIAO-BOOT",
+    "mcu": "nrf52840",
+    "variant": "Seeed_XIAO_nRF52840_Sense",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "7.3.0",
+      "sd_fwid": "0x0123"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "Seeed Xiao BLE Sense",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink",
+      "cmsis-dap",
+      "blackmagic"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://www.seeedstudio.com/Seeed-XIAO-BLE-Sense-nRF52840-p-5253.html",
+  "vendor": "Seeed Studio"
+}
@@ -2,20 +2,24 @@
 ; https://docs.platformio.org/page/projectconf.html

 [platformio]
-;default_envs = tbeam
+default_envs = tbeam
 ;default_envs = pico
 ;default_envs = tbeam-s3-core
 ;default_envs = tbeam0.7
 ;default_envs = heltec-v1
 ;default_envs = heltec-v2_0
 ;default_envs = heltec-v2_1
+;default_envs = heltec-wireless-tracker
+;default_envs = chatter2
 ;default_envs = tlora-v1
 ;default_envs = tlora_v1_3
 ;default_envs = tlora-v2
 ;default_envs = tlora-v2-1-1_6
+;default_envs = tlora-v2-1-1_6-tcxo
 ;default_envs = tlora-t3s3-v1
 ;default_envs = lora-relay-v1 # nrf board
 ;default_envs = t-echo
+;default_envs = canaryone
 ;default_envs = nrf52840dk-geeksville
 ;default_envs = native # lora-relay-v1 # nrf52840dk-geeksville # linux # or if you'd like to change the default to something like lora-relay-v1 put that here
 ;default_envs = nano-g1
@@ -25,7 +29,8 @@
 ;default_envs = meshtastic-dr-dev
 ;default_envs = m5stack-coreink
 ;default_envs = rak4631
-default_envs = wio-e5
+;default_envs = rak10701
+;default_envs = wio-e5

 extra_configs =
  arch/*/*.ini
@@ -49,9 +54,11 @@ build_flags = -Wno-missing-field-initializers
  -DRADIOLIB_EXCLUDE_NRF24
  -DRADIOLIB_EXCLUDE_RF69
  -DRADIOLIB_EXCLUDE_SX1231
+  -DRADIOLIB_EXCLUDE_SX1233
  -DRADIOLIB_EXCLUDE_SI443X
  -DRADIOLIB_EXCLUDE_RFM2X
  -DRADIOLIB_EXCLUDE_AFSK
+  -DRADIOLIB_EXCLUDE_BELL
  -DRADIOLIB_EXCLUDE_HELLSCHREIBER
  -DRADIOLIB_EXCLUDE_MORSE
  -DRADIOLIB_EXCLUDE_RTTY
@@ -62,16 +69,18 @@ build_flags = -Wno-missing-field-initializers
  -DRADIOLIB_EXCLUDE_PAGER
  -DRADIOLIB_EXCLUDE_FSK4
  -DRADIOLIB_EXCLUDE_APRS
+  -DRADIOLIB_EXCLUDE_LORAWAN

 monitor_speed = 115200

 lib_deps =
-  https://github.com/meshtastic/esp8266-oled-ssd1306.git#b38094e03dfa964fbc0e799bc374e91a605c1223 ; ESP8266_SSD1306
-  https://github.com/mathertel/OneButton#2.1.0 ; OneButton library for non-blocking button debounce
+  jgromes/RadioLib@~6.6.0
+  https://github.com/meshtastic/esp8266-oled-ssd1306.git#ee628ee6c9588d4c56c9e3da35f0fc9448ad54a8 ; ESP8266_SSD1306
+  mathertel/OneButton@^2.5.0 ; OneButton library for non-blocking button debounce
  https://github.com/meshtastic/arduino-fsm.git#7db3702bf0cfe97b783d6c72595e3f38e0b19159
-  https://github.com/meshtastic/TinyGPSPlus.git#127ad674ef85f0201cb68a065879653ed94792c4
-  https://github.com/meshtastic/ArduinoThread.git#72921ac222eed6f526ba1682023cee290d9aa1b3
-  nanopb/Nanopb@^0.4.7
+  https://github.com/meshtastic/TinyGPSPlus.git#71a82db35f3b973440044c476d4bcdc673b104f4
+  https://github.com/meshtastic/ArduinoThread.git#1ae8778c85d0a2a729f989e0b1e7d7c4dc84eef0
+  nanopb/Nanopb@^0.4.8
  erriez/ErriezCRC32@^1.0.1

 ; Used for the code analysis in PIO Home / Inspect
@@ -87,11 +96,10 @@ check_flags =
 framework = arduino
 lib_deps =
  ${env.lib_deps}
-  mprograms/QMC5883LCompass@^1.1.1
  end2endzone/NonBlockingRTTTL@^1.3.0
  https://github.com/meshtastic/SparkFun_ATECCX08a_Arduino_Library.git#5cf62b36c6f30bc72a07bdb2c11fc9a22d1e31da

-build_flags = ${env.build_flags} -Os -DRADIOLIB_SPI_PARANOID=0
+build_flags = ${env.build_flags} -Os
 build_src_filter = ${env.build_src_filter} -<platform/portduino/>

 ; Common libs for communicating over TCP/IP networks such as MQTT
@@ -105,18 +113,31 @@ lib_deps =
 ; (not included in native / portduino)
 [environmental_base]
 lib_deps =
-  adafruit/Adafruit BusIO@^1.11.4
-  adafruit/Adafruit Unified Sensor@^1.1.9
-  adafruit/Adafruit BMP280 Library@^2.6.6
+  adafruit/Adafruit BusIO@^1.15.0
+  adafruit/Adafruit Unified Sensor@^1.1.11
+  adafruit/Adafruit BMP280 Library@^2.6.8
+  adafruit/Adafruit BMP085 Library@^1.2.4
  adafruit/Adafruit BME280 Library@^2.2.2
-  https://github.com/boschsensortec/Bosch-BSEC2-Library#v1.5.2400
+  https://github.com/boschsensortec/Bosch-BSEC2-Library#v1.7.2502
  boschsensortec/BME68x Sensor Library@^1.1.40407
  adafruit/Adafruit MCP9808 Library@^2.0.0
+  https://github.com/KodinLanewave/INA3221@^1.0.0
  adafruit/Adafruit INA260 Library@^1.5.0
  adafruit/Adafruit INA219@^1.2.0
  adafruit/Adafruit SHTC3 Library@^1.0.0
  adafruit/Adafruit LPS2X@^2.0.4
-  adafruit/Adafruit SHT31 Library@^2.2.0
+  adafruit/Adafruit SHT31 Library@^2.2.2
  adafruit/Adafruit PM25 AQI Sensor@^1.0.6
  adafruit/Adafruit MPU6050@^2.2.4
-  adafruit/Adafruit LIS3DH@^1.2.4
+  adafruit/Adafruit LIS3DH@^1.2.4
+  adafruit/Adafruit AHTX0@^2.0.5
+  lewisxhe/SensorLib@^0.2.0
+  adafruit/Adafruit LSM6DS@^4.7.2
+  mprograms/QMC5883LCompass@^1.2.0
+  adafruit/Adafruit VEML7700 Library@^2.1.6
+  adafruit/Adafruit SHT4x Library@^1.0.4
+  adafruit/Adafruit TSL2591 Library@^1.4.5
+  ClosedCube OPT3001@^1.1.2
+  emotibit/EmotiBit MLX90632@^1.0.8
+  dfrobot/DFRobot_RTU@^1.0.3
+  https://github.com/meshtastic/DFRobot_LarkWeatherStation#0e884fc86b7a0b602c7ff3d26b893b997f15c6ac
@@ -1,61 +1,78 @@
+#pragma once
+#include "configuration.h"
+
+#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
+
 #include "PowerFSM.h"
 #include "concurrency/OSThread.h"
-#include "configuration.h"
 #include "main.h"
 #include "power.h"

 #include <Adafruit_LIS3DH.h>
+#include <Adafruit_LSM6DS3TRC.h>
 #include <Adafruit_MPU6050.h>
+#include <Arduino.h>
+#include <SensorBMA423.hpp>
+#include <Wire.h>

 #define ACCELEROMETER_CHECK_INTERVAL_MS 100
 #define ACCELEROMETER_CLICK_THRESHOLD 40

-namespace concurrency
+static inline int readRegister(uint8_t address, uint8_t reg, uint8_t *data, uint8_t len)
 {
+    Wire.beginTransmission(address);
+    Wire.write(reg);
+    Wire.endTransmission();
+    Wire.requestFrom((uint8_t)address, (uint8_t)len);
+    uint8_t i = 0;
+    while (Wire.available()) {
+        data[i++] = Wire.read();
+    }
+    return 0; // Pass
+}
+
+static inline int writeRegister(uint8_t address, uint8_t reg, uint8_t *data, uint8_t len)
+{
+    Wire.beginTransmission(address);
+    Wire.write(reg);
+    Wire.write(data, len);
+    return (0 != Wire.endTransmission());
+}
+
 class AccelerometerThread : public concurrency::OSThread
 {
  public:
-    AccelerometerThread(ScanI2C::DeviceType type = ScanI2C::DeviceType::NONE) : OSThread("AccelerometerThread")
+    explicit AccelerometerThread(ScanI2C::DeviceType type) : OSThread("AccelerometerThread")
    {
        if (accelerometer_found.port == ScanI2C::I2CPort::NO_I2C) {
            LOG_DEBUG("AccelerometerThread disabling due to no sensors found\n");
            disable();
            return;
        }
+        acceleremoter_type = type;

        if (!config.display.wake_on_tap_or_motion && !config.device.double_tap_as_button_press) {
            LOG_DEBUG("AccelerometerThread disabling due to no interested configurations\n");
            disable();
            return;
        }
-
-        accleremoter_type = type;
-        LOG_DEBUG("AccelerometerThread initializing\n");
-
-        if (accleremoter_type == ScanI2C::DeviceType::MPU6050 && mpu.begin(accelerometer_found.address)) {
-            LOG_DEBUG("MPU6050 initializing\n");
-            // setup motion detection
-            mpu.setHighPassFilter(MPU6050_HIGHPASS_0_63_HZ);
-            mpu.setMotionDetectionThreshold(1);
-            mpu.setMotionDetectionDuration(20);
-            mpu.setInterruptPinLatch(true); // Keep it latched.  Will turn off when reinitialized.
-            mpu.setInterruptPinPolarity(true);
-        } else if (accleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.begin(accelerometer_found.address)) {
-            LOG_DEBUG("LIS3DH initializing\n");
-            lis.setRange(LIS3DH_RANGE_2_G);
-            // Adjust threshhold, higher numbers are less sensitive
-            lis.setClick(config.device.double_tap_as_button_press ? 2 : 1, ACCELEROMETER_CLICK_THRESHOLD);
-        }
+        init();
    }

+    void start()
+    {
+        init();
+        setIntervalFromNow(0);
+    };
+
  protected:
    int32_t runOnce() override
    {
        canSleep = true; // Assume we should not keep the board awake

-        if (accleremoter_type == ScanI2C::DeviceType::MPU6050 && mpu.getMotionInterruptStatus()) {
+        if (acceleremoter_type == ScanI2C::DeviceType::MPU6050 && mpu.getMotionInterruptStatus()) {
            wakeScreen();
-        } else if (accleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.getClick() > 0) {
+        } else if (acceleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.getClick() > 0) {
            uint8_t click = lis.getClick();
            if (!config.device.double_tap_as_button_press) {
                wakeScreen();
@@ -65,11 +82,84 @@ class AccelerometerThread : public concurrency::OSThread
                buttonPress();
                return 500;
            }
+        } else if (acceleremoter_type == ScanI2C::DeviceType::BMA423 && bmaSensor.readIrqStatus() != DEV_WIRE_NONE) {
+            if (bmaSensor.isTilt() || bmaSensor.isDoubleTap()) {
+                wakeScreen();
+                return 500;
+            }
+        } else if (acceleremoter_type == ScanI2C::DeviceType::LSM6DS3 && lsm.shake()) {
+            wakeScreen();
+            return 500;
        }
+
        return ACCELEROMETER_CHECK_INTERVAL_MS;
    }

  private:
+    void init()
+    {
+        LOG_DEBUG("AccelerometerThread initializing\n");
+
+        if (acceleremoter_type == ScanI2C::DeviceType::MPU6050 && mpu.begin(accelerometer_found.address)) {
+            LOG_DEBUG("MPU6050 initializing\n");
+            // setup motion detection
+            mpu.setHighPassFilter(MPU6050_HIGHPASS_0_63_HZ);
+            mpu.setMotionDetectionThreshold(1);
+            mpu.setMotionDetectionDuration(20);
+            mpu.setInterruptPinLatch(true); // Keep it latched.  Will turn off when reinitialized.
+            mpu.setInterruptPinPolarity(true);
+        } else if (acceleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.begin(accelerometer_found.address)) {
+            LOG_DEBUG("LIS3DH initializing\n");
+            lis.setRange(LIS3DH_RANGE_2_G);
+            // Adjust threshold, higher numbers are less sensitive
+            lis.setClick(config.device.double_tap_as_button_press ? 2 : 1, ACCELEROMETER_CLICK_THRESHOLD);
+        } else if (acceleremoter_type == ScanI2C::DeviceType::BMA423 &&
+                   bmaSensor.begin(accelerometer_found.address, &readRegister, &writeRegister)) {
+            LOG_DEBUG("BMA423 initializing\n");
+            bmaSensor.configAccelerometer(bmaSensor.RANGE_2G, bmaSensor.ODR_100HZ, bmaSensor.BW_NORMAL_AVG4,
+                                          bmaSensor.PERF_CONTINUOUS_MODE);
+            bmaSensor.enableAccelerometer();
+            bmaSensor.configInterrupt(BMA4_LEVEL_TRIGGER, BMA4_ACTIVE_HIGH, BMA4_PUSH_PULL, BMA4_OUTPUT_ENABLE,
+                                      BMA4_INPUT_DISABLE);
+
+#ifdef BMA423_INT
+            pinMode(BMA4XX_INT, INPUT);
+            attachInterrupt(
+                BMA4XX_INT,
+                [] {
+                    // Set interrupt to set irq value to true
+                    BMA_IRQ = true;
+                },
+                RISING); // Select the interrupt mode according to the actual circuit
+#endif
+
+#ifdef T_WATCH_S3
+            // Need to raise the wrist function, need to set the correct axis
+            bmaSensor.setReampAxes(bmaSensor.REMAP_TOP_LAYER_RIGHT_CORNER);
+#else
+            bmaSensor.setReampAxes(bmaSensor.REMAP_BOTTOM_LAYER_BOTTOM_LEFT_CORNER);
+#endif
+            // bmaSensor.enableFeature(bmaSensor.FEATURE_STEP_CNTR, true);
+            bmaSensor.enableFeature(bmaSensor.FEATURE_TILT, true);
+            bmaSensor.enableFeature(bmaSensor.FEATURE_WAKEUP, true);
+            // bmaSensor.resetPedometer();
+
+            // Turn on feature interrupt
+            bmaSensor.enablePedometerIRQ();
+            bmaSensor.enableTiltIRQ();
+            // It corresponds to isDoubleClick interrupt
+            bmaSensor.enableWakeupIRQ();
+        } else if (acceleremoter_type == ScanI2C::DeviceType::LSM6DS3 && lsm.begin_I2C(accelerometer_found.address)) {
+            LOG_DEBUG("LSM6DS3 initializing\n");
+            // Default threshold of 2G, less sensitive options are 4, 8 or 16G
+            lsm.setAccelRange(LSM6DS_ACCEL_RANGE_2_G);
+#ifndef LSM6DS3_WAKE_THRESH
+#define LSM6DS3_WAKE_THRESH 20
+#endif
+            lsm.enableWakeup(config.display.wake_on_tap_or_motion, 1, LSM6DS3_WAKE_THRESH);
+            // Duration is number of occurances needed to trigger, higher threshold is less sensitive
+        }
+    }
    void wakeScreen()
    {
        if (powerFSM.getState() == &stateDARK) {
@@ -84,9 +174,12 @@ class AccelerometerThread : public concurrency::OSThread
        powerFSM.trigger(EVENT_PRESS);
    }

-    ScanI2C::DeviceType accleremoter_type;
+    ScanI2C::DeviceType acceleremoter_type;
    Adafruit_MPU6050 mpu;
    Adafruit_LIS3DH lis;
+    Adafruit_LSM6DS3TRC lsm;
+    SensorBMA423 bmaSensor;
+    bool BMA_IRQ = false;
 };

-} // namespace concurrency
+#endif
@@ -0,0 +1,129 @@
+#include "configuration.h"
+
+#ifdef HAS_NCP5623
+#include <graphics/RAKled.h>
+NCP5623 rgb;
+#endif
+
+#ifdef HAS_NEOPIXEL
+#include <graphics/NeoPixel.h>
+Adafruit_NeoPixel pixels(NEOPIXEL_COUNT, NEOPIXEL_DATA, NEOPIXEL_TYPE);
+#endif
+
+#ifdef UNPHONE
+#include "unPhone.h"
+extern unPhone unphone;
+#endif
+
+namespace concurrency
+{
+class AmbientLightingThread : public concurrency::OSThread
+{
+  public:
+    explicit AmbientLightingThread(ScanI2C::DeviceType type) : OSThread("AmbientLightingThread")
+    {
+        // Uncomment to test module
+        // moduleConfig.ambient_lighting.led_state = true;
+        // moduleConfig.ambient_lighting.current = 10;
+        // // Default to a color based on our node number
+        // moduleConfig.ambient_lighting.red = (myNodeInfo.my_node_num & 0xFF0000) >> 16;
+        // moduleConfig.ambient_lighting.green = (myNodeInfo.my_node_num & 0x00FF00) >> 8;
+        // moduleConfig.ambient_lighting.blue = myNodeInfo.my_node_num & 0x0000FF;
+
+#ifdef HAS_NCP5623
+        _type = type;
+        if (_type == ScanI2C::DeviceType::NONE) {
+            LOG_DEBUG("AmbientLightingThread disabling due to no RGB leds found on I2C bus\n");
+            disable();
+            return;
+        }
+#endif
+#if defined(HAS_NCP5623) || defined(RGBLED_RED) || defined(HAS_NEOPIXEL) || defined(UNPHONE)
+        if (!moduleConfig.ambient_lighting.led_state) {
+            LOG_DEBUG("AmbientLightingThread disabling due to moduleConfig.ambient_lighting.led_state OFF\n");
+            disable();
+            return;
+        }
+        LOG_DEBUG("AmbientLightingThread initializing\n");
+#ifdef HAS_NCP5623
+        if (_type == ScanI2C::NCP5623) {
+            rgb.begin();
+#endif
+#ifdef RGBLED_RED
+            pinMode(RGBLED_RED, OUTPUT);
+            pinMode(RGBLED_GREEN, OUTPUT);
+            pinMode(RGBLED_BLUE, OUTPUT);
+#endif
+#ifdef HAS_NEOPIXEL
+            pixels.begin(); // Initialise the pixel(s)
+            pixels.clear(); // Set all pixel colors to 'off'
+            pixels.setBrightness(moduleConfig.ambient_lighting.current);
+#endif
+            setLighting();
+#endif
+#ifdef HAS_NCP5623
+        }
+#endif
+    }
+
+  protected:
+    int32_t runOnce() override
+    {
+#if defined(HAS_NCP5623) || defined(RGBLED_RED) || defined(HAS_NEOPIXEL) || defined(UNPHONE)
+#ifdef HAS_NCP5623
+        if (_type == ScanI2C::NCP5623 && moduleConfig.ambient_lighting.led_state) {
+#endif
+            setLighting();
+            return 30000; // 30 seconds to reset from any animations that may have been running from Ext. Notification
+#ifdef HAS_NCP5623
+        }
+#endif
+#endif
+        return disable();
+    }
+
+  private:
+    ScanI2C::DeviceType _type = ScanI2C::DeviceType::NONE;
+
+    void setLighting()
+    {
+#ifdef HAS_NCP5623
+        rgb.setCurrent(moduleConfig.ambient_lighting.current);
+        rgb.setRed(moduleConfig.ambient_lighting.red);
+        rgb.setGreen(moduleConfig.ambient_lighting.green);
+        rgb.setBlue(moduleConfig.ambient_lighting.blue);
+        LOG_DEBUG("Initializing NCP5623 Ambient lighting w/ current=%d, red=%d, green=%d, blue=%d\n",
+                  moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
+                  moduleConfig.ambient_lighting.blue);
+#endif
+#ifdef HAS_NEOPIXEL
+        pixels.fill(pixels.Color(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
+                                 moduleConfig.ambient_lighting.blue),
+                    0, NEOPIXEL_COUNT);
+        pixels.show();
+        LOG_DEBUG("Initializing NeoPixel Ambient lighting w/ brightness(current)=%d, red=%d, green=%d, blue=%d\n",
+                  moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
+                  moduleConfig.ambient_lighting.blue);
+#endif
+#ifdef RGBLED_CA
+        analogWrite(RGBLED_RED, 255 - moduleConfig.ambient_lighting.red);
+        analogWrite(RGBLED_GREEN, 255 - moduleConfig.ambient_lighting.green);
+        analogWrite(RGBLED_BLUE, 255 - moduleConfig.ambient_lighting.blue);
+        LOG_DEBUG("Initializing Ambient lighting RGB Common Anode w/ red=%d, green=%d, blue=%d\n",
+                  moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+#elif defined(RGBLED_RED)
+        analogWrite(RGBLED_RED, moduleConfig.ambient_lighting.red);
+        analogWrite(RGBLED_GREEN, moduleConfig.ambient_lighting.green);
+        analogWrite(RGBLED_BLUE, moduleConfig.ambient_lighting.blue);
+        LOG_DEBUG("Initializing Ambient lighting RGB Common Cathode w/ red=%d, green=%d, blue=%d\n",
+                  moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+#endif
+#ifdef UNPHONE
+        unphone.rgb(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+        LOG_DEBUG("Initializing unPhone Ambient lighting w/ red=%d, green=%d, blue=%d\n", moduleConfig.ambient_lighting.red,
+                  moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+#endif
+    }
+};
+
+} // namespace concurrency
@@ -0,0 +1,77 @@
+#pragma once
+#include "PowerFSM.h"
+#include "concurrency/OSThread.h"
+#include "configuration.h"
+#include "main.h"
+#include "sleep.h"
+
+#ifdef HAS_I2S
+#include <AudioFileSourcePROGMEM.h>
+#include <AudioGeneratorRTTTL.h>
+#include <AudioOutputI2S.h>
+#include <ESP8266SAM.h>
+
+#define AUDIO_THREAD_INTERVAL_MS 100
+
+class AudioThread : public concurrency::OSThread
+{
+  public:
+    AudioThread() : OSThread("AudioThread") { initOutput(); }
+
+    void beginRttl(const void *data, uint32_t len)
+    {
+        setCPUFast(true);
+        rtttlFile = new AudioFileSourcePROGMEM(data, len);
+        i2sRtttl = new AudioGeneratorRTTTL();
+        i2sRtttl->begin(rtttlFile, audioOut);
+    }
+
+    bool isPlaying()
+    {
+        if (i2sRtttl != nullptr) {
+            return i2sRtttl->isRunning() && i2sRtttl->loop();
+        }
+        return false;
+    }
+
+    void stop()
+    {
+        if (i2sRtttl != nullptr) {
+            i2sRtttl->stop();
+            delete i2sRtttl;
+            i2sRtttl = nullptr;
+        }
+        if (rtttlFile != nullptr) {
+            delete rtttlFile;
+            rtttlFile = nullptr;
+        }
+
+        setCPUFast(false);
+    }
+
+  protected:
+    int32_t runOnce() override
+    {
+        canSleep = true; // Assume we should not keep the board awake
+
+        // if (i2sRtttl != nullptr && i2sRtttl->isRunning()) {
+        //     i2sRtttl->loop();
+        // }
+        return AUDIO_THREAD_INTERVAL_MS;
+    }
+
+  private:
+    void initOutput()
+    {
+        audioOut = new AudioOutputI2S(1, AudioOutputI2S::EXTERNAL_I2S);
+        audioOut->SetPinout(DAC_I2S_BCK, DAC_I2S_WS, DAC_I2S_DOUT);
+        audioOut->SetGain(0.2);
+    };
+
+    AudioGeneratorRTTTL *i2sRtttl = nullptr;
+    AudioOutputI2S *audioOut;
+
+    AudioFileSourcePROGMEM *rtttlFile;
+};
+
+#endif
@@ -0,0 +1,321 @@
+#include "ButtonThread.h"
+#include "configuration.h"
+#if !MESHTASTIC_EXCLUDE_GPS
+#include "GPS.h"
+#endif
+#include "MeshService.h"
+#include "PowerFSM.h"
+#include "RadioLibInterface.h"
+#include "buzz.h"
+#include "main.h"
+#include "modules/ExternalNotificationModule.h"
+#include "power.h"
+#ifdef ARCH_PORTDUINO
+#include "platform/portduino/PortduinoGlue.h"
+#endif
+
+#define DEBUG_BUTTONS 0
+#if DEBUG_BUTTONS
+#define LOG_BUTTON(...) LOG_DEBUG(__VA_ARGS__)
+#else
+#define LOG_BUTTON(...)
+#endif
+
+using namespace concurrency;
+
+ButtonThread *buttonThread; // Declared extern in header
+volatile ButtonThread::ButtonEventType ButtonThread::btnEvent = ButtonThread::BUTTON_EVENT_NONE;
+
+#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
+OneButton ButtonThread::userButton; // Get reference to static member
+#endif
+
+ButtonThread::ButtonThread() : OSThread("Button")
+{
+#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
+
+#if defined(ARCH_PORTDUINO)
+    if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC) {
+        this->userButton = OneButton(settingsMap[user], true, true);
+        LOG_DEBUG("Using GPIO%02d for button\n", settingsMap[user]);
+    }
+#elif defined(BUTTON_PIN)
+    int pin = config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN; // Resolved button pin
+    this->userButton = OneButton(pin, true, true);
+    LOG_DEBUG("Using GPIO%02d for button\n", pin);
+#endif
+
+#ifdef INPUT_PULLUP_SENSE
+    // Some platforms (nrf52) have a SENSE variant which allows wake from sleep - override what OneButton did
+    pinMode(pin, INPUT_PULLUP_SENSE);
+#endif
+
+#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
+    userButton.attachClick(userButtonPressed);
+    userButton.setClickMs(BUTTON_CLICK_MS);
+    userButton.setPressMs(BUTTON_LONGPRESS_MS);
+    userButton.setDebounceMs(1);
+    userButton.attachDoubleClick(userButtonDoublePressed);
+    userButton.attachMultiClick(userButtonMultiPressed, this); // Reference to instance: get click count from non-static OneButton
+#ifndef T_DECK // T-Deck immediately wakes up after shutdown, so disable this function
+    userButton.attachLongPressStart(userButtonPressedLongStart);
+    userButton.attachLongPressStop(userButtonPressedLongStop);
+#endif
+#endif
+
+#ifdef BUTTON_PIN_ALT
+    userButtonAlt = OneButton(BUTTON_PIN_ALT, true, true);
+#ifdef INPUT_PULLUP_SENSE
+    // Some platforms (nrf52) have a SENSE variant which allows wake from sleep - override what OneButton did
+    pinMode(BUTTON_PIN_ALT, INPUT_PULLUP_SENSE);
+#endif
+    userButtonAlt.attachClick(userButtonPressed);
+    userButtonAlt.setClickMs(BUTTON_CLICK_MS);
+    userButtonAlt.setPressMs(BUTTON_LONGPRESS_MS);
+    userButtonAlt.setDebounceMs(1);
+    userButtonAlt.attachDoubleClick(userButtonDoublePressed);
+    userButtonAlt.attachLongPressStart(userButtonPressedLongStart);
+    userButtonAlt.attachLongPressStop(userButtonPressedLongStop);
+#endif
+
+#ifdef BUTTON_PIN_TOUCH
+    userButtonTouch = OneButton(BUTTON_PIN_TOUCH, true, true);
+    userButtonTouch.setPressMs(BUTTON_TOUCH_MS);
+    userButtonTouch.attachLongPressStart(touchPressedLongStart); // Better handling with longpress than click?
+#endif
+
+    attachButtonInterrupts();
+#endif
+}
+
+int32_t ButtonThread::runOnce()
+{
+    // If the button is pressed we suppress CPU sleep until release
+    canSleep = true; // Assume we should not keep the board awake
+
+#if defined(BUTTON_PIN)
+    userButton.tick();
+    canSleep &= userButton.isIdle();
+#elif defined(ARCH_PORTDUINO)
+    if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC) {
+        userButton.tick();
+        canSleep &= userButton.isIdle();
+    }
+#endif
+#ifdef BUTTON_PIN_ALT
+    userButtonAlt.tick();
+    canSleep &= userButtonAlt.isIdle();
+#endif
+#ifdef BUTTON_PIN_TOUCH
+    userButtonTouch.tick();
+    canSleep &= userButtonTouch.isIdle();
+#endif
+
+    if (btnEvent != BUTTON_EVENT_NONE) {
+        switch (btnEvent) {
+        case BUTTON_EVENT_PRESSED: {
+            LOG_BUTTON("press!\n");
+#ifdef BUTTON_PIN
+            if (((config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN) !=
+                 moduleConfig.canned_message.inputbroker_pin_press) ||
+                !(moduleConfig.canned_message.updown1_enabled || moduleConfig.canned_message.rotary1_enabled) ||
+                !moduleConfig.canned_message.enabled) {
+                powerFSM.trigger(EVENT_PRESS);
+            }
+#endif
+#if defined(ARCH_PORTDUINO)
+            if ((settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC) &&
+                    (settingsMap[user] != moduleConfig.canned_message.inputbroker_pin_press) ||
+                !moduleConfig.canned_message.enabled) {
+                powerFSM.trigger(EVENT_PRESS);
+            }
+#endif
+            break;
+        }
+
+        case BUTTON_EVENT_DOUBLE_PRESSED: {
+            LOG_BUTTON("Double press!\n");
+            service.refreshLocalMeshNode();
+            auto sentPosition = service.trySendPosition(NODENUM_BROADCAST, true);
+            if (screen) {
+                if (sentPosition)
+                    screen->print("Sent ad-hoc position\n");
+                else
+                    screen->print("Sent ad-hoc nodeinfo\n");
+                screen->forceDisplay(true); // Force a new UI frame, then force an EInk update
+            }
+            break;
+        }
+
+        case BUTTON_EVENT_MULTI_PRESSED: {
+            LOG_BUTTON("Mulitipress! %hux\n", multipressClickCount);
+            switch (multipressClickCount) {
+#if HAS_GPS
+            // 3 clicks: toggle GPS
+            case 3:
+                if (!config.device.disable_triple_click && (gps != nullptr)) {
+                    gps->toggleGpsMode();
+                    if (screen)
+                        screen->forceDisplay(true); // Force a new UI frame, then force an EInk update
+                }
+                break;
+#endif
+#if defined(USE_EINK) && defined(PIN_EINK_EN) // i.e. T-Echo
+            // 4 clicks: toggle backlight
+            case 4:
+                digitalWrite(PIN_EINK_EN, digitalRead(PIN_EINK_EN) == LOW);
+                break;
+#endif
+            // No valid multipress action
+            default:
+                break;
+            } // end switch: click count
+
+            break;
+        } // end multipress event
+
+        case BUTTON_EVENT_LONG_PRESSED: {
+            LOG_BUTTON("Long press!\n");
+            powerFSM.trigger(EVENT_PRESS);
+            if (screen)
+                screen->startShutdownScreen();
+            playBeep();
+            break;
+        }
+
+        // Do actual shutdown when button released, otherwise the button release
+        // may wake the board immediatedly.
+        case BUTTON_EVENT_LONG_RELEASED: {
+            LOG_INFO("Shutdown from long press\n");
+            playShutdownMelody();
+            delay(3000);
+            power->shutdown();
+            break;
+        }
+
+#ifdef BUTTON_PIN_TOUCH
+        case BUTTON_EVENT_TOUCH_LONG_PRESSED: {
+            LOG_BUTTON("Touch press!\n");
+            if (screen) {
+                // Wake if asleep
+                if (powerFSM.getState() == &stateDARK)
+                    powerFSM.trigger(EVENT_PRESS);
+
+                // Update display (legacy behaviour)
+                screen->forceDisplay();
+            }
+            break;
+        }
+#endif // BUTTON_PIN_TOUCH
+
+        default:
+            break;
+        }
+        btnEvent = BUTTON_EVENT_NONE;
+    }
+
+    runASAP = false;
+    return 50;
+}
+
+/*
+ * Attach (or re-attach) hardware interrupts for buttons
+ * Public method. Used outside class when waking from MCU sleep
+ */
+void ButtonThread::attachButtonInterrupts()
+{
+#if defined(ARCH_PORTDUINO)
+    if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC)
+        wakeOnIrq(settingsMap[user], FALLING);
+#elif defined(BUTTON_PIN)
+    // Interrupt for user button, during normal use. Improves responsiveness.
+    attachInterrupt(
+        config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN,
+        []() {
+            ButtonThread::userButton.tick();
+            runASAP = true;
+            BaseType_t higherWake = 0;
+            mainDelay.interruptFromISR(&higherWake);
+        },
+        CHANGE);
+#endif
+
+#ifdef BUTTON_PIN_ALT
+    wakeOnIrq(BUTTON_PIN_ALT, FALLING);
+#endif
+
+#ifdef BUTTON_PIN_TOUCH
+    wakeOnIrq(BUTTON_PIN_TOUCH, FALLING);
+#endif
+}
+
+/*
+ * Detach the "normal" button interrupts.
+ * Public method. Used before attaching a "wake-on-button" interrupt for MCU sleep
+ */
+void ButtonThread::detachButtonInterrupts()
+{
+#if defined(ARCH_PORTDUINO)
+    if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC)
+        detachInterrupt(settingsMap[user]);
+#elif defined(BUTTON_PIN)
+    detachInterrupt(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN);
+#endif
+
+#ifdef BUTTON_PIN_ALT
+    detachInterrupt(BUTTON_PIN_ALT);
+#endif
+
+#ifdef BUTTON_PIN_TOUCH
+    detachInterrupt(BUTTON_PIN_TOUCH);
+#endif
+}
+
+/**
+ * Watch a GPIO and if we get an IRQ, wake the main thread.
+ * Use to add wake on button press
+ */
+void ButtonThread::wakeOnIrq(int irq, int mode)
+{
+    attachInterrupt(
+        irq,
+        [] {
+            BaseType_t higherWake = 0;
+            mainDelay.interruptFromISR(&higherWake);
+            runASAP = true;
+        },
+        FALLING);
+}
+
+// Static callback
+void ButtonThread::userButtonMultiPressed(void *callerThread)
+{
+    // Grab click count from non-static button, while the info is still valid
+    ButtonThread *thread = (ButtonThread *)callerThread;
+    thread->storeClickCount();
+
+    // Then handle later, in the usual way
+    btnEvent = BUTTON_EVENT_MULTI_PRESSED;
+}
+
+// Non-static method, runs during callback. Grabs info while still valid
+void ButtonThread::storeClickCount()
+{
+#ifdef BUTTON_PIN
+    multipressClickCount = userButton.getNumberClicks();
+#endif
+}
+
+void ButtonThread::userButtonPressedLongStart()
+{
+    if (millis() > c_holdOffTime) {
+        btnEvent = BUTTON_EVENT_LONG_PRESSED;
+    }
+}
+
+void ButtonThread::userButtonPressedLongStop()
+{
+    if (millis() > c_holdOffTime) {
+        btnEvent = BUTTON_EVENT_LONG_RELEASED;
+    }
+}
@@ -1,34 +1,45 @@
-#include "PowerFSM.h"
-#include "RadioLibInterface.h"
-#include "buzz.h"
+#pragma once
+
+#include "OneButton.h"
 #include "concurrency/OSThread.h"
 #include "configuration.h"
-#include "graphics/Screen.h"
-#include "power.h"
-#include <OneButton.h>

-namespace concurrency
-{
-/**
- * Watch a GPIO and if we get an IRQ, wake the main thread.
- * Use to add wake on button press
- */
-void wakeOnIrq(int irq, int mode)
-{
-    attachInterrupt(
-        irq,
-        [] {
-            BaseType_t higherWake = 0;
-            mainDelay.interruptFromISR(&higherWake);
-        },
-        FALLING);
-}
+#ifndef BUTTON_CLICK_MS
+#define BUTTON_CLICK_MS 250
+#endif
+
+#ifndef BUTTON_LONGPRESS_MS
+#define BUTTON_LONGPRESS_MS 5000
+#endif
+
+#ifndef BUTTON_TOUCH_MS
+#define BUTTON_TOCH_MS 400
+#endif

 class ButtonThread : public concurrency::OSThread
 {
-// Prepare for button presses
-#ifdef BUTTON_PIN
-    OneButton userButton;
+  public:
+    static const uint32_t c_holdOffTime = 30000; // hold off 30s after boot
+
+    enum ButtonEventType {
+        BUTTON_EVENT_NONE,
+        BUTTON_EVENT_PRESSED,
+        BUTTON_EVENT_DOUBLE_PRESSED,
+        BUTTON_EVENT_MULTI_PRESSED,
+        BUTTON_EVENT_LONG_PRESSED,
+        BUTTON_EVENT_LONG_RELEASED,
+        BUTTON_EVENT_TOUCH_LONG_PRESSED,
+    };
+
+    ButtonThread();
+    int32_t runOnce() override;
+    void attachButtonInterrupts();
+    void detachButtonInterrupts();
+    void storeClickCount();
+
+  private:
+#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
+    static OneButton userButton; // Static - accessed from an interrupt
 #endif
 #ifdef BUTTON_PIN_ALT
    OneButton userButtonAlt;
@@ -36,164 +47,22 @@ class ButtonThread : public concurrency::OSThread
 #ifdef BUTTON_PIN_TOUCH
    OneButton userButtonTouch;
 #endif
-    static bool shutdown_on_long_stop;

-  public:
-    static uint32_t longPressTime;
+    // set during IRQ
+    static volatile ButtonEventType btnEvent;

-    // callback returns the period for the next callback invocation (or 0 if we should no longer be called)
-    ButtonThread() : OSThread("Button")
-    {
-#ifdef BUTTON_PIN
-        userButton = OneButton(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN, true, true);
-#ifdef INPUT_PULLUP_SENSE
-        // Some platforms (nrf52) have a SENSE variant which allows wake from sleep - override what OneButton did
-        pinMode(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN, INPUT_PULLUP_SENSE);
-#endif
-        userButton.attachClick(userButtonPressed);
-        userButton.setClickMs(300);
-        userButton.attachDuringLongPress(userButtonPressedLong);
-        userButton.attachDoubleClick(userButtonDoublePressed);
-        userButton.attachMultiClick(userButtonMultiPressed);
-        userButton.attachLongPressStart(userButtonPressedLongStart);
-        userButton.attachLongPressStop(userButtonPressedLongStop);
-        wakeOnIrq(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN, FALLING);
-#endif
-#ifdef BUTTON_PIN_ALT
-        userButtonAlt = OneButton(BUTTON_PIN_ALT, true, true);
-#ifdef INPUT_PULLUP_SENSE
-        // Some platforms (nrf52) have a SENSE variant which allows wake from sleep - override what OneButton did
-        pinMode(BUTTON_PIN_ALT, INPUT_PULLUP_SENSE);
-#endif
-        userButtonAlt.attachClick(userButtonPressed);
-        userButtonAlt.attachDuringLongPress(userButtonPressedLong);
-        userButtonAlt.attachDoubleClick(userButtonDoublePressed);
-        userButtonAlt.attachLongPressStart(userButtonPressedLongStart);
-        userButtonAlt.attachLongPressStop(userButtonPressedLongStop);
-        wakeOnIrq(BUTTON_PIN_ALT, FALLING);
-#endif
+    // Store click count during callback, for later use
+    volatile int multipressClickCount = 0;

-#ifdef BUTTON_PIN_TOUCH
-        userButtonTouch = OneButton(BUTTON_PIN_TOUCH, true, true);
-        userButtonTouch.attachClick(touchPressed);
-        wakeOnIrq(BUTTON_PIN_TOUCH, FALLING);
-#endif
-    }
+    static void wakeOnIrq(int irq, int mode);

-  protected:
-    /// If the button is pressed we suppress CPU sleep until release
-    int32_t runOnce() override
-    {
-        canSleep = true; // Assume we should not keep the board awake
-
-#ifdef BUTTON_PIN
-        userButton.tick();
-        canSleep &= userButton.isIdle();
-#endif
-#ifdef BUTTON_PIN_ALT
-        userButtonAlt.tick();
-        canSleep &= userButtonAlt.isIdle();
-#endif
-#ifdef BUTTON_PIN_TOUCH
-        userButtonTouch.tick();
-        canSleep &= userButtonTouch.isIdle();
-#endif
-        // if (!canSleep) LOG_DEBUG("Supressing sleep!\n");
-        // else LOG_DEBUG("sleep ok\n");
-
-        return 5;
-    }
-
-  private:
-    static void touchPressed()
-    {
-        screen->forceDisplay();
-        LOG_DEBUG("touch press!\n");
-    }
-
-    static void userButtonPressed()
-    {
-        // LOG_DEBUG("press!\n");
-#ifdef BUTTON_PIN
-        if (((config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN) !=
-             moduleConfig.canned_message.inputbroker_pin_press) ||
-            !moduleConfig.canned_message.enabled) {
-            powerFSM.trigger(EVENT_PRESS);
-        }
-#endif
-    }
-    static void userButtonPressedLong()
-    {
-        // LOG_DEBUG("Long press!\n");
-        // If user button is held down for 5 seconds, shutdown the device.
-        if ((millis() - longPressTime > 5000) && (longPressTime > 0)) {
-#if defined(ARCH_NRF52) || defined(ARCH_ESP32)
-            // Do actual shutdown when button released, otherwise the button release
-            // may wake the board immediatedly.
-            if ((!shutdown_on_long_stop) && (millis() > 30 * 1000)) {
-                screen->startShutdownScreen();
-                LOG_INFO("Shutdown from long press");
-                playBeep();
-#ifdef PIN_LED1
-                ledOff(PIN_LED1);
-#endif
-#ifdef PIN_LED2
-                ledOff(PIN_LED2);
-#endif
-#ifdef PIN_LED3
-                ledOff(PIN_LED3);
-#endif
-                shutdown_on_long_stop = true;
-            }
-#endif
-        } else {
-            // LOG_DEBUG("Long press %u\n", (millis() - longPressTime));
-        }
-    }
-
-    static void userButtonDoublePressed()
-    {
-#if defined(USE_EINK) && defined(PIN_EINK_EN)
-        digitalWrite(PIN_EINK_EN, digitalRead(PIN_EINK_EN) == LOW);
-#endif
-        screen->print("Sent ad-hoc ping\n");
-        service.refreshLocalMeshNode();
-        service.sendNetworkPing(NODENUM_BROADCAST, true);
-    }
-
-    static void userButtonMultiPressed()
-    {
-#if defined(GPS_POWER_TOGGLE)
-        if (config.position.gps_enabled) {
-            LOG_DEBUG("Flag set to false for gps power\n");
-        } else {
-            LOG_DEBUG("Flag set to true to restore power\n");
-        }
-        config.position.gps_enabled = !(config.position.gps_enabled);
-        doGPSpowersave(config.position.gps_enabled);
-#endif
-    }
-
-    static void userButtonPressedLongStart()
-    {
-        if (millis() > 30 * 1000) {
-            LOG_DEBUG("Long press start!\n");
-            longPressTime = millis();
-        }
-    }
-
-    static void userButtonPressedLongStop()
-    {
-        if (millis() > 30 * 1000) {
-            LOG_DEBUG("Long press stop!\n");
-            longPressTime = 0;
-            if (shutdown_on_long_stop) {
-                playShutdownMelody();
-                delay(3000);
-                power->shutdown();
-            }
-        }
-    }
+    // IRQ callbacks
+    static void userButtonPressed() { btnEvent = BUTTON_EVENT_PRESSED; }
+    static void userButtonDoublePressed() { btnEvent = BUTTON_EVENT_DOUBLE_PRESSED; }
+    static void userButtonMultiPressed(void *callerThread); // Retrieve click count from non-static Onebutton while still valid
+    static void userButtonPressedLongStart();
+    static void userButtonPressedLongStop();
+    static void touchPressedLongStart() { btnEvent = BUTTON_EVENT_TOUCH_LONG_PRESSED; }
 };

-} // namespace concurrency
+extern ButtonThread *buttonThread;
@@ -28,7 +28,7 @@
 #define DEBUG_PORT (*console) // Serial debug port

 #ifdef USE_SEGGER
-#define DEBUG_PORT
+// #undef DEBUG_PORT
 #define LOG_DEBUG(...) SEGGER_RTT_printf(0, __VA_ARGS__)
 #define LOG_INFO(...) SEGGER_RTT_printf(0, __VA_ARGS__)
 #define LOG_WARN(...) SEGGER_RTT_printf(0, __VA_ARGS__)
@@ -36,7 +36,7 @@
 #define LOG_CRIT(...) SEGGER_RTT_printf(0, __VA_ARGS__)
 #define LOG_TRACE(...) SEGGER_RTT_printf(0, __VA_ARGS__)
 #else
-#ifdef DEBUG_PORT
+#if defined(DEBUG_PORT) && !defined(DEBUG_MUTE)
 #define LOG_DEBUG(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_DEBUG, __VA_ARGS__)
 #define LOG_INFO(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_INFO, __VA_ARGS__)
 #define LOG_WARN(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_WARN, __VA_ARGS__)
@@ -0,0 +1,34 @@
+#include "DisplayFormatters.h"
+
+const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName)
+{
+    switch (preset) {
+    case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW:
+        return useShortName ? "ShortS" : "ShortSlow";
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST:
+        return useShortName ? "ShortF" : "ShortFast";
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_SLOW:
+        return useShortName ? "MedS" : "MediumSlow";
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST:
+        return useShortName ? "MedF" : "MediumFast";
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW:
+        return useShortName ? "LongS" : "LongSlow";
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST:
+        return useShortName ? "LongF" : "LongFast";
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE:
+        return useShortName ? "LongM" : "LongMod";
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_VERY_LONG_SLOW:
+        return useShortName ? "VeryL" : "VLongSlow";
+        break;
+    default:
+        return useShortName ? "Custom" : "Invalid";
+        break;
+    }
+}
@@ -0,0 +1,8 @@
+#pragma once
+#include "NodeDB.h"
+
+class DisplayFormatters
+{
+  public:
+    static const char *getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName);
+};
@@ -1,3 +1,13 @@
+/**
+ * @file FSCommon.cpp
+ * @brief This file contains functions for common filesystem operations such as copying, renaming, listing and deleting files and
+ * directories.
+ *
+ * The functions in this file are used to perform common filesystem operations such as copying, renaming, listing and deleting
+ * files and directories. These functions are used in the Meshtastic-device project to manage files and directories on the
+ * device's filesystem.
+ *
+ */
 #include "FSCommon.h"
 #include "configuration.h"

@@ -8,10 +18,19 @@
 #ifdef SDCARD_USE_SPI1
 SPIClass SPI1(HSPI);
 #define SDHandler SPI1
+#else
+#define SDHandler SPI
 #endif

 #endif // HAS_SDCARD

+/**
+ * @brief Copies a file from one location to another.
+ *
+ * @param from The path of the source file.
+ * @param to The path of the destination file.
+ * @return true if the file was successfully copied, false otherwise.
+ */
 bool copyFile(const char *from, const char *to)
 {
 #ifdef FSCom
@@ -41,6 +60,14 @@ bool copyFile(const char *from, const char *to)
 #endif
 }

+/**
+ * Renames a file from pathFrom to pathTo.
+ *
+ * @param pathFrom The original path of the file.
+ * @param pathTo The new path of the file.
+ *
+ * @return True if the file was successfully renamed, false otherwise.
+ */
 bool renameFile(const char *pathFrom, const char *pathTo)
 {
 #ifdef FSCom
@@ -57,6 +84,13 @@ bool renameFile(const char *pathFrom, const char *pathTo)
 #endif
 }

+/**
+ * Lists the contents of a directory.
+ *
+ * @param dirname The name of the directory to list.
+ * @param levels The number of levels of subdirectories to list.
+ * @param del Whether or not to delete the contents of the directory after listing.
+ */
 void listDir(const char *dirname, uint8_t levels, bool del = false)
 {
 #ifdef FSCom
@@ -152,6 +186,13 @@ void listDir(const char *dirname, uint8_t levels, bool del = false)
 #endif
 }

+/**
+ * @brief Removes a directory and all its contents.
+ *
+ * This function recursively removes a directory and all its contents, including subdirectories and files.
+ *
+ * @param dirname The name of the directory to remove.
+ */
 void rmDir(const char *dirname)
 {
 #ifdef FSCom
@@ -164,6 +205,62 @@ void rmDir(const char *dirname)
 #endif
 }

+bool fsCheck()
+{
+#if defined(ARCH_NRF52)
+    size_t write_size = 0;
+    size_t read_size = 0;
+    char buf[32] = {0};
+
+    Adafruit_LittleFS_Namespace::File file(FSCom);
+    const char *text = "meshtastic fs test";
+    size_t text_length = strlen(text);
+    const char *filename = "/meshtastic.txt";
+
+    LOG_DEBUG("Try create file .\n");
+    if (file.open(filename, FILE_O_WRITE)) {
+        write_size = file.write(text);
+    } else {
+        LOG_DEBUG("Open file failed .\n");
+        goto FORMAT_FS;
+    }
+
+    if (write_size != text_length) {
+        LOG_DEBUG("Text bytes do not match .\n");
+        file.close();
+        goto FORMAT_FS;
+    }
+
+    file.close();
+
+    if (!file.open(filename, FILE_O_READ)) {
+        LOG_DEBUG("Open file failed .\n");
+        goto FORMAT_FS;
+    }
+
+    read_size = file.readBytes(buf, text_length);
+    if (read_size != text_length) {
+        LOG_DEBUG("Text bytes do not match .\n");
+        file.close();
+        goto FORMAT_FS;
+    }
+
+    if (memcmp(buf, text, text_length) != 0) {
+        LOG_DEBUG("The written bytes do not match the read bytes .\n");
+        file.close();
+        goto FORMAT_FS;
+    }
+    return true;
+FORMAT_FS:
+    LOG_DEBUG("Format FS ....\n");
+    FSCom.format();
+    FSCom.begin();
+    return false;
+#else
+    return true;
+#endif
+}
+
 void fsInit()
 {
 #ifdef FSCom
@@ -171,8 +268,37 @@ void fsInit()
        LOG_ERROR("Filesystem mount Failed.\n");
        // assert(0); This auto-formats the partition, so no need to fail here.
    }
-#ifdef ARCH_ESP32
+#if defined(ARCH_ESP32)
    LOG_DEBUG("Filesystem files (%d/%d Bytes):\n", FSCom.usedBytes(), FSCom.totalBytes());
+#elif defined(ARCH_NRF52)
+    /*
+     * nRF52840 has a certain chance of automatic formatting failure.
+     * Try to create a file after initializing the file system. If the creation fails,
+     * it means that the file system is not working properly. Please format it manually again.
+     * To check the normality of the file system, you need to disable the LFS_NO_ASSERT assertion.
+     * Otherwise, the assertion will be entered at the moment of reading or opening, and the FS will not be formatted.
+     * */
+    bool ret = false;
+    uint8_t retry = 3;
+
+    while (retry--) {
+        ret = fsCheck();
+        if (ret) {
+            LOG_DEBUG("File system check is OK.\n");
+            break;
+        }
+        delay(10);
+    }
+
+    // It may not be possible to reach this step.
+    // Add a loop here to prevent unpredictable situations from happening.
+    // Can add a screen to display error status later.
+    if (!ret) {
+        while (1) {
+            LOG_ERROR("The file system is damaged and cannot proceed to the next step.\n");
+            delay(1000);
+        }
+    }
 #else
    LOG_DEBUG("Filesystem files:\n");
 #endif
@@ -180,6 +306,9 @@ void fsInit()
 #endif
 }

+/**
+ * Initializes the SD card and mounts the file system.
+ */
 void setupSDCard()
 {
 #ifdef HAS_SDCARD
@@ -210,4 +339,4 @@ void setupSDCard()
    LOG_DEBUG("Total space: %llu MB\n", SD.totalBytes() / (1024 * 1024));
    LOG_DEBUG("Used space: %llu MB\n", SD.usedBytes() / (1024 * 1024));
 #endif
-}
+}
@@ -4,8 +4,6 @@
 #include "configuration.h"
 #include <Arduino.h>

-extern NodeDB nodeDB;
-
 namespace meshtastic
 {

@@ -55,7 +53,7 @@ class GPSStatus : public Status
 #ifdef GPS_EXTRAVERBOSE
            LOG_WARN("Using fixed latitude\n");
 #endif
-            meshtastic_NodeInfoLite *node = nodeDB.getMeshNode(nodeDB.getNodeNum());
+            meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(nodeDB->getNodeNum());
            return node->position.latitude_i;
        } else {
            return p.latitude_i;
@@ -68,7 +66,7 @@ class GPSStatus : public Status
 #ifdef GPS_EXTRAVERBOSE
            LOG_WARN("Using fixed longitude\n");
 #endif
-            meshtastic_NodeInfoLite *node = nodeDB.getMeshNode(nodeDB.getNodeNum());
+            meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(nodeDB->getNodeNum());
            return node->position.longitude_i;
        } else {
            return p.longitude_i;
@@ -81,32 +79,23 @@ class GPSStatus : public Status
 #ifdef GPS_EXTRAVERBOSE
            LOG_WARN("Using fixed altitude\n");
 #endif
-            meshtastic_NodeInfoLite *node = nodeDB.getMeshNode(nodeDB.getNodeNum());
+            meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(nodeDB->getNodeNum());
            return node->position.altitude;
        } else {
            return p.altitude;
        }
    }

-    uint32_t getDOP() const
-    {
-        return p.PDOP;
-    }
+    uint32_t getDOP() const { return p.PDOP; }

-    uint32_t getHeading() const
-    {
-        return p.ground_track;
-    }
+    uint32_t getHeading() const { return p.ground_track; }

-    uint32_t getNumSatellites() const
-    {
-        return p.sats_in_view;
-    }
+    uint32_t getNumSatellites() const { return p.sats_in_view; }

    bool matches(const GPSStatus *newStatus) const
    {
 #ifdef GPS_EXTRAVERBOSE
-        LOG_DEBUG("GPSStatus.match() new pos@%x to old pos@%x\n", newStatus->p.pos_timestamp, p.pos_timestamp);
+        LOG_DEBUG("GPSStatus.match() new pos@%x to old pos@%x\n", newStatus->p.timestamp, p.timestamp);
 #endif
        return (newStatus->hasLock != hasLock || newStatus->isConnected != isConnected ||
                newStatus->isPowerSaving != isPowerSaving || newStatus->p.latitude_i != p.latitude_i ||
@@ -149,4 +138,4 @@ class GPSStatus : public Status

 } // namespace meshtastic

-extern meshtastic::GPSStatus *gpsStatus;
+extern meshtastic::GPSStatus *gpsStatus;
@@ -5,7 +5,8 @@
 * Schedule a callback to run.  The callback must _not_ block, though it is called from regular thread level (not ISR)
 *
 * NOTE! xTimerPend... seems to ignore the time passed in on ESP32 and on NRF52
- * The reason this didn't work is bcause xTimerPednFunctCall really isn't a timer function at all - it just means run the callback
+ * The reason this didn't work is because xTimerPednFunctCall really isn't a timer function at all - it just means run the
+callback
 * from the timer thread the next time you have spare cycles.
 *
 * @return true if successful, false if the timer fifo is too full.
@@ -28,6 +29,16 @@ static void IRAM_ATTR onTimer()
    (*tCallback)(tParam1, tParam2);
 }

+/**
+ * Schedules a hardware callback function to be executed after a specified delay.
+ *
+ * @param callback The function to be executed.
+ * @param param1 The first parameter to be passed to the function.
+ * @param param2 The second parameter to be passed to the function.
+ * @param delayMsec The delay time in milliseconds before the function is executed.
+ *
+ * @return True if the function was successfully scheduled, false otherwise.
+ */
 bool scheduleHWCallback(PendableFunction callback, void *param1, uint32_t param2, uint32_t delayMsec)
 {
    if (!timer) {
@@ -10,12 +10,12 @@ template <class T> class Observable;
 */
 template <class T> class Observer
 {
-    std::list<Observable<T> *> observed;
+    std::list<Observable<T> *> observables;

  public:
    virtual ~Observer();

-    /// Stop watching the obserable
+    /// Stop watching the observable
    void unobserve(Observable<T> *o);

    /// Start watching a specified observable
@@ -86,21 +86,21 @@ template <class T> class Observable

 template <class T> Observer<T>::~Observer()
 {
-    for (typename std::list<Observable<T> *>::const_iterator iterator = observed.begin(); iterator != observed.end();
+    for (typename std::list<Observable<T> *>::const_iterator iterator = observables.begin(); iterator != observables.end();
         ++iterator) {
        (*iterator)->removeObserver(this);
    }
-    observed.clear();
+    observables.clear();
 }

 template <class T> void Observer<T>::unobserve(Observable<T> *o)
 {
    o->removeObserver(this);
-    observed.remove(o);
+    observables.remove(o);
 }

 template <class T> void Observer<T>::observe(Observable<T> *o)
 {
-    observed.push_back(o);
+    observables.push_back(o);
    o->addObserver(this);
-}
+}
@@ -1,17 +1,36 @@
+/**
+ * @file Power.cpp
+ * @brief This file contains the implementation of the Power class, which is responsible for managing power-related functionality
+ * of the device. It includes battery level sensing, power management unit (PMU) control, and power state machine management. The
+ * Power class is used by the main device class to manage power-related functionality.
+ *
+ * The file also includes implementations of various battery level sensors, such as the AnalogBatteryLevel class, which assumes
+ * the battery voltage is attached via a voltage-divider to an analog input.
+ *
+ * This file is part of the Meshtastic project.
+ * For more information, see: https://meshtastic.org/
+ */
 #include "power.h"
 #include "NodeDB.h"
 #include "PowerFSM.h"
 #include "buzz/buzz.h"
 #include "configuration.h"
 #include "main.h"
+#include "meshUtils.h"
 #include "sleep.h"
-#include "utils.h"

-#ifdef DEBUG_HEAP_MQTT
+// Working USB detection for powered/charging states on the RAK platform
+#ifdef NRF_APM
+#include "nrfx_power.h"
+#endif
+
+#if defined(DEBUG_HEAP_MQTT) && !MESHTASTIC_EXCLUDE_MQTT
 #include "mqtt/MQTT.h"
 #include "target_specific.h"
+#if !MESTASTIC_EXCLUDE_WIFI
 #include <WiFi.h>
 #endif
+#endif

 #ifndef DELAY_FOREVER
 #define DELAY_FOREVER portMAX_DELAY
@@ -31,15 +50,29 @@ RTC_NOINIT_ATTR uint64_t RTC_reg_b;

 esp_adc_cal_characteristics_t *adc_characs = (esp_adc_cal_characteristics_t *)calloc(1, sizeof(esp_adc_cal_characteristics_t));
 #ifndef ADC_ATTENUATION
-static const adc_atten_t atten = ADC_ATTEN_DB_11;
+static const adc_atten_t atten = ADC_ATTEN_DB_12;
 #else
 static const adc_atten_t atten = ADC_ATTENUATION;
 #endif
 #endif // BATTERY_PIN && ARCH_ESP32

-#if HAS_TELEMETRY && !defined(ARCH_PORTDUINO)
+#ifdef EXT_CHRG_DETECT
+#ifndef EXT_CHRG_DETECT_MODE
+static const uint8_t ext_chrg_detect_mode = INPUT;
+#else
+static const uint8_t ext_chrg_detect_mode = EXT_CHRG_DETECT_MODE;
+#endif
+#ifndef EXT_CHRG_DETECT_VALUE
+static const uint8_t ext_chrg_detect_value = HIGH;
+#else
+static const uint8_t ext_chrg_detect_value = EXT_CHRG_DETECT_VALUE;
+#endif
+#endif
+
+#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(ARCH_PORTDUINO)
 INA260Sensor ina260Sensor;
 INA219Sensor ina219Sensor;
+INA3221Sensor ina3221Sensor;
 #endif

 #ifdef HAS_PMU
@@ -50,7 +83,7 @@ XPowersLibInterface *PMU = NULL;
 #else

 // Copy of the base class defined in axp20x.h.
-// I'd rather not inlude axp20x.h as it brings Wire dependency.
+// I'd rather not include axp20x.h as it brings Wire dependency.
 class HasBatteryLevel
 {
  public:
@@ -109,8 +142,6 @@ class AnalogBatteryLevel : public HasBatteryLevel
 {
    /**
     * Battery state of charge, from 0 to 100 or -1 for unknown
-     *
-     * FIXME - use a lipo lookup table, the current % full is super wrong
     */
    virtual int getBatteryPercent() override
    {
@@ -119,13 +150,32 @@ class AnalogBatteryLevel : public HasBatteryLevel
        if (v < noBatVolt)
            return -1; // If voltage is super low assume no battery installed

-#ifdef ARCH_ESP32
+#ifdef NO_BATTERY_LEVEL_ON_CHARGE
        // This does not work on a RAK4631 with battery connected
        if (v > chargingVolt)
            return 0; // While charging we can't report % full on the battery
 #endif
-
-        return clamp((int)(100 * (v - emptyVolt) / (fullVolt - emptyVolt)), 0, 100);
+        /**
+         * @brief   Battery voltage lookup table interpolation to obtain a more
+         * precise percentage rather than the old proportional one.
+         * @author  Gabriele Russo
+         * @date    06/02/2024
+         */
+        float battery_SOC = 0.0;
+        uint16_t voltage = v / NUM_CELLS; // single cell voltage (average)
+        for (int i = 0; i < NUM_OCV_POINTS; i++) {
+            if (OCV[i] <= voltage) {
+                if (i == 0) {
+                    battery_SOC = 100.0; // 100% full
+                } else {
+                    // interpolate between OCV[i] and OCV[i-1]
+                    battery_SOC = (float)100.0 / (NUM_OCV_POINTS - 1.0) *
+                                  (NUM_OCV_POINTS - 1.0 - i + ((float)voltage - OCV[i]) / (OCV[i - 1] - OCV[i]));
+                }
+                break;
+            }
+        }
+        return clamp((int)(battery_SOC), 0, 100);
    }

    /**
@@ -134,7 +184,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
    virtual uint16_t getBattVoltage() override
    {

-#if defined(HAS_TELEMETRY) && !defined(ARCH_PORTDUINO) && !defined(HAS_PMU)
+#if HAS_TELEMETRY && !defined(ARCH_PORTDUINO) && !defined(HAS_PMU) && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
        if (hasINA()) {
            LOG_DEBUG("Using INA on I2C addr 0x%x for device battery voltage\n", config.power.device_battery_ina_address);
            return getINAVoltage();
@@ -146,7 +196,8 @@ class AnalogBatteryLevel : public HasBatteryLevel
 #endif

 #ifndef BATTERY_SENSE_SAMPLES
-#define BATTERY_SENSE_SAMPLES 30
+#define BATTERY_SENSE_SAMPLES                                                                                                    \
+    15 // Set the number of samples, it has an effect of increasing sensitivity in complex electromagnetic environment.
 #endif

 #ifdef BATTERY_PIN
@@ -158,61 +209,124 @@ class AnalogBatteryLevel : public HasBatteryLevel
        if (millis() - last_read_time_ms > min_read_interval) {
            last_read_time_ms = millis();

-            // Set the number of samples, it has an effect of increasing sensitivity, especially in complex electromagnetic
-            // environment.
            uint32_t raw = 0;
-#ifdef ARCH_ESP32
-#ifndef BAT_MEASURE_ADC_UNIT // ADC1
-            for (int i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
-                raw += adc1_get_raw(adc_channel);
-            }
-#else  // ADC2
-            int32_t adc_buf = 0;
-            for (int i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
-                // ADC2 wifi bug workaround, see
-                // https://github.com/espressif/arduino-esp32/issues/102
-                WRITE_PERI_REG(SENS_SAR_READ_CTRL2_REG, RTC_reg_b);
-                SET_PERI_REG_MASK(SENS_SAR_READ_CTRL2_REG, SENS_SAR2_DATA_INV);
-                adc2_get_raw(adc_channel, ADC_WIDTH_BIT_12, &adc_buf);
-                raw += adc_buf;
-            }
-#endif // BAT_MEASURE_ADC_UNIT
-#else  // !ARCH_ESP32
+            float scaled = 0;
+
+#ifdef ARCH_ESP32 // ADC block for espressif platforms
+            raw = espAdcRead();
+            scaled = esp_adc_cal_raw_to_voltage(raw, adc_characs);
+            scaled *= operativeAdcMultiplier;
+#else // block for all other platforms
            for (uint32_t i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
                raw += analogRead(BATTERY_PIN);
            }
-#endif
            raw = raw / BATTERY_SENSE_SAMPLES;
-            float scaled;
-#ifdef ARCH_ESP32
-            scaled = esp_adc_cal_raw_to_voltage(raw, adc_characs);
-            scaled *= operativeAdcMultiplier;
-#else
-#ifndef VBAT_RAW_TO_SCALED
-            scaled = 1000.0 * operativeAdcMultiplier * (AREF_VOLTAGE / 1024.0) * raw;
-#else
-            scaled = VBAT_RAW_TO_SCALED(raw); // defined in variant.h
-#endif // VBAT RAW TO SCALED
-#endif // ARCH_ESP32
-       // LOG_DEBUG("battery gpio %d raw val=%u scaled=%u\n", BATTERY_PIN, raw, (uint32_t)(scaled));
+            scaled = operativeAdcMultiplier * ((1000 * AREF_VOLTAGE) / pow(2, BATTERY_SENSE_RESOLUTION_BITS)) * raw;
+#endif

-            last_read_value = scaled;
-            return scaled;
-        } else {
-            return last_read_value;
+            if (!initial_read_done) {
+                // Flush the smoothing filter with an ADC reading, if the reading is plausibly correct
+                if (scaled > last_read_value)
+                    last_read_value = scaled;
+                initial_read_done = true;
+            } else {
+                // Already initialized - filter this reading
+                last_read_value += (scaled - last_read_value) * 0.5; // Virtual LPF
+            }
+
+            // LOG_DEBUG("battery gpio %d raw val=%u scaled=%u filtered=%u\n", BATTERY_PIN, raw, (uint32_t)(scaled), (uint32_t)
+            // (last_read_value));
        }
-#else
-        return 0;
+        return last_read_value;
 #endif // BATTERY_PIN
+        return 0;
    }

+#if defined(ARCH_ESP32) && !defined(HAS_PMU) && defined(BATTERY_PIN)
+    /**
+     * ESP32 specific function for getting calibrated ADC reads
+     */
+    uint32_t espAdcRead()
+    {
+
+        uint32_t raw = 0;
+        uint8_t raw_c = 0; // raw reading counter
+
+#ifndef BAT_MEASURE_ADC_UNIT // ADC1
+#ifdef ADC_CTRL              // enable adc voltage divider when we need to read
+        pinMode(ADC_CTRL, OUTPUT);
+        digitalWrite(ADC_CTRL, ADC_CTRL_ENABLED);
+        delay(10);
+#endif
+        for (int i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
+            int val_ = adc1_get_raw(adc_channel);
+            if (val_ >= 0) { // save only valid readings
+                raw += val_;
+                raw_c++;
+            }
+            // delayMicroseconds(100);
+        }
+#ifdef ADC_CTRL // disable adc voltage divider when we need to read
+        digitalWrite(ADC_CTRL, !ADC_CTRL_ENABLED);
+#endif
+#else // ADC2
+#ifdef ADC_CTRL
+#if defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_WIRELESS_PAPER_V1_0)
+        pinMode(ADC_CTRL, OUTPUT);
+        digitalWrite(ADC_CTRL, LOW); // ACTIVE LOW
+        delay(10);
+#endif
+#endif // End ADC_CTRL
+
+#ifdef CONFIG_IDF_TARGET_ESP32S3 // ESP32S3
+        // ADC2 wifi bug workaround not required, breaks compile
+        // On ESP32S3, ADC2 can take turns with Wifi (?)
+
+        int32_t adc_buf;
+        esp_err_t read_result;
+
+        // Multiple samples
+        for (int i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
+            adc_buf = 0;
+            read_result = -1;
+
+            read_result = adc2_get_raw(adc_channel, ADC_WIDTH_BIT_12, &adc_buf);
+            if (read_result == ESP_OK) {
+                raw += adc_buf;
+                raw_c++; // Count valid samples
+            } else {
+                LOG_DEBUG("An attempt to sample ADC2 failed\n");
+            }
+        }
+
+#else  // Other ESP32
+        int32_t adc_buf = 0;
+        for (int i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
+            // ADC2 wifi bug workaround, see
+            // https://github.com/espressif/arduino-esp32/issues/102
+            WRITE_PERI_REG(SENS_SAR_READ_CTRL2_REG, RTC_reg_b);
+            SET_PERI_REG_MASK(SENS_SAR_READ_CTRL2_REG, SENS_SAR2_DATA_INV);
+            adc2_get_raw(adc_channel, ADC_WIDTH_BIT_12, &adc_buf);
+            raw += adc_buf;
+            raw_c++;
+        }
+#endif // BAT_MEASURE_ADC_UNIT
+
+#ifdef ADC_CTRL
+#if defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_WIRELESS_PAPER_V1_0)
+        digitalWrite(ADC_CTRL, HIGH);
+#endif
+#endif // End ADC_CTRL
+
+#endif // End BAT_MEASURE_ADC_UNIT
+        return (raw / (raw_c < 1 ? 1 : raw_c));
+    }
+#endif
+
    /**
     * return true if there is a battery installed in this unit
     */
-    virtual bool isBatteryConnect() override
-    {
-        return getBatteryPercent() != -1;
-    }
+    virtual bool isBatteryConnect() override { return getBatteryPercent() != -1; }

    /// If we see a battery voltage higher than physics allows - assume charger is pumping
    /// in power
@@ -235,38 +349,40 @@ class AnalogBatteryLevel : public HasBatteryLevel
    /// we can't be smart enough to say 'full'?
    virtual bool isCharging() override
    {
+#ifdef EXT_CHRG_DETECT
+        return digitalRead(EXT_CHRG_DETECT) == ext_chrg_detect_value;
+#else
        return isBatteryConnect() && isVbusIn();
+#endif
    }

  private:
    /// If we see a battery voltage higher than physics allows - assume charger is pumping
    /// in power

-#ifndef BAT_FULLVOLT
-#define BAT_FULLVOLT 4200
-#endif
-#ifndef BAT_EMPTYVOLT
-#define BAT_EMPTYVOLT 3270
-#endif
-#ifndef BAT_CHARGINGVOLT
-#define BAT_CHARGINGVOLT 4210
-#endif
-#ifndef BAT_NOBATVOLT
-#define BAT_NOBATVOLT 2230
-#endif
-
-    /// For heltecs with no battery connected, the measured voltage is 2204, so raising to 2230 from 2100
-    const float fullVolt = BAT_FULLVOLT, emptyVolt = BAT_EMPTYVOLT, chargingVolt = BAT_CHARGINGVOLT, noBatVolt = BAT_NOBATVOLT;
-    float last_read_value = 0.0;
+    /// For heltecs with no battery connected, the measured voltage is 2204, so
+    // need to be higher than that, in this case is 2500mV (3000-500)
+    const uint16_t OCV[NUM_OCV_POINTS] = {OCV_ARRAY};
+    const float chargingVolt = (OCV[0] + 10) * NUM_CELLS;
+    const float noBatVolt = (OCV[NUM_OCV_POINTS - 1] - 500) * NUM_CELLS;
+    // Start value from minimum voltage for the filter to not start from 0
+    // that could trigger some events.
+    // This value is over-written by the first ADC reading, it the voltage seems reasonable.
+    bool initial_read_done = false;
+    float last_read_value = (OCV[NUM_OCV_POINTS - 1] * NUM_CELLS);
    uint32_t last_read_time_ms = 0;

-#if defined(HAS_TELEMETRY) && !defined(ARCH_PORTDUINO)
+#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(ARCH_PORTDUINO)
    uint16_t getINAVoltage()
    {
-        if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA219] == config.power.device_battery_ina_address) {
+        if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA219].first == config.power.device_battery_ina_address) {
            return ina219Sensor.getBusVoltageMv();
-        } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA260] == config.power.device_battery_ina_address) {
+        } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA260].first ==
+                   config.power.device_battery_ina_address) {
            return ina260Sensor.getBusVoltageMv();
+        } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA3221].first ==
+                   config.power.device_battery_ina_address) {
+            return ina3221Sensor.getBusVoltageMv();
        }
        return 0;
    }
@@ -276,11 +392,12 @@ class AnalogBatteryLevel : public HasBatteryLevel
        if (!config.power.device_battery_ina_address) {
            return false;
        }
-        if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA219] == config.power.device_battery_ina_address) {
+        if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA219].first == config.power.device_battery_ina_address) {
            if (!ina219Sensor.isInitialized())
                return ina219Sensor.runOnce() > 0;
            return ina219Sensor.isRunning();
-        } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA260] == config.power.device_battery_ina_address) {
+        } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA260].first ==
+                   config.power.device_battery_ina_address) {
            if (!ina260Sensor.isInitialized())
                return ina260Sensor.runOnce() > 0;
            return ina260Sensor.isRunning();
@@ -306,6 +423,9 @@ bool Power::analogInit()
 #ifdef EXT_PWR_DETECT
    pinMode(EXT_PWR_DETECT, INPUT);
 #endif
+#ifdef EXT_CHRG_DETECT
+    pinMode(EXT_CHRG_DETECT, ext_chrg_detect_mode);
+#endif

 #ifdef BATTERY_PIN
    LOG_DEBUG("Using analog input %d for battery level\n", BATTERY_PIN);
@@ -329,8 +449,11 @@ bool Power::analogInit()
    adc1_config_channel_atten(adc_channel, atten);
 #else // ADC2
    adc2_config_channel_atten(adc_channel, atten);
+#ifndef CONFIG_IDF_TARGET_ESP32S3
    // ADC2 wifi bug workaround
+    // Not required with ESP32S3, breaks compile
    RTC_reg_b = READ_PERI_REG(SENS_SAR_READ_CTRL2_REG);
+#endif
 #endif
    // calibrate ADC
    esp_adc_cal_value_t val_type = esp_adc_cal_characterize(unit, atten, width, DEFAULT_VREF, adc_characs);
@@ -339,13 +462,16 @@ bool Power::analogInit()
        LOG_INFO("ADCmod: ADC characterization based on Two Point values stored in eFuse\n");
    } else if (val_type == ESP_ADC_CAL_VAL_EFUSE_VREF) {
        LOG_INFO("ADCmod: ADC characterization based on reference voltage stored in eFuse\n");
-    } else {
+    }
+#ifdef CONFIG_IDF_TARGET_ESP32S3
+    // ESP32S3
+    else if (val_type == ESP_ADC_CAL_VAL_EFUSE_TP_FIT) {
+        LOG_INFO("ADCmod: ADC Characterization based on Two Point values and fitting curve coefficients stored in eFuse\n");
+    }
+#endif
+    else {
        LOG_INFO("ADCmod: ADC characterization based on default reference voltage\n");
    }
-#if defined(HELTEC_V3) || defined(HELTEC_WSL_V3)
-    pinMode(37, OUTPUT); // needed for P channel mosfet to work
-    digitalWrite(37, LOW);
-#endif
 #endif // ARCH_ESP32

 #ifdef ARCH_NRF52
@@ -354,11 +480,12 @@ bool Power::analogInit()
 #else
    analogReference(AR_INTERNAL); // 3.6V
 #endif
-    analogReadResolution(BATTERY_SENSE_RESOLUTION_BITS); // Default of 12 is not very linear. Recommended to use 10 or 11
-                                                         // depending on needed resolution.
-
 #endif // ARCH_NRF52

+#ifndef ARCH_ESP32
+    analogReadResolution(BATTERY_SENSE_RESOLUTION_BITS);
+#endif
+
    batteryLevel = &analogLevel;
    return true;
 #else
@@ -366,13 +493,15 @@ bool Power::analogInit()
 #endif
 }

+/**
+ * Initializes the Power class.
+ *
+ * @return true if the setup was successful, false otherwise.
+ */
 bool Power::setup()
 {
-    bool found = axpChipInit();
+    bool found = axpChipInit() || analogInit();

-    if (!found) {
-        found = analogInit();
-    }
    enabled = found;
    low_voltage_counter = 0;

@@ -381,19 +510,9 @@ bool Power::setup()

 void Power::shutdown()
 {
-    screen->setOn(false);
-#if defined(USE_EINK) && defined(PIN_EINK_EN)
-    digitalWrite(PIN_EINK_EN, LOW); // power off backlight first
-#endif
-
    LOG_INFO("Shutting down\n");

-#ifdef HAS_PMU
-    if (pmu_found == true) {
-        PMU->setChargingLedMode(XPOWERS_CHG_LED_OFF);
-        PMU->shutdown();
-    }
-#elif defined(ARCH_NRF52) || defined(ARCH_ESP32)
+#if defined(ARCH_NRF52) || defined(ARCH_ESP32)
 #ifdef PIN_LED1
    ledOff(PIN_LED1);
 #endif
@@ -401,9 +520,9 @@ void Power::shutdown()
    ledOff(PIN_LED2);
 #endif
 #ifdef PIN_LED3
-    ledOff(PIN_LED2);
+    ledOff(PIN_LED3);
 #endif
-    doDeepSleep(DELAY_FOREVER);
+    doDeepSleep(DELAY_FOREVER, false);
 #endif
 }

@@ -423,18 +542,43 @@ void Power::readPowerStatus()
                batteryChargePercent = batteryLevel->getBatteryPercent();
            } else {
                // If the AXP192 returns a percentage less than 0, the feature is either not supported or there is an error
-                // In that case, we compute an estimate of the charge percent based on maximum and minimum voltages defined in
-                // power.h
-                batteryChargePercent =
-                    clamp((int)(((batteryVoltageMv - BAT_MILLIVOLTS_EMPTY) * 1e2) / (BAT_MILLIVOLTS_FULL - BAT_MILLIVOLTS_EMPTY)),
-                          0, 100);
+                // In that case, we compute an estimate of the charge percent based on open circuite voltage table defined
+                // in power.h
+                batteryChargePercent = clamp((int)(((batteryVoltageMv - (OCV[NUM_OCV_POINTS - 1] * NUM_CELLS)) * 1e2) /
+                                                   ((OCV[0] * NUM_CELLS) - (OCV[NUM_OCV_POINTS - 1] * NUM_CELLS))),
+                                             0, 100);
            }
        }

+        OptionalBool NRF_USB = OptFalse;
+
+#ifdef NRF_APM // Section of code detects USB power on the RAK4631 and updates the power states.  Takes 20 seconds or so to detect
+               // changes.
+
+        static nrfx_power_usb_state_t prev_nrf_usb_state = (nrfx_power_usb_state_t)-1; // -1 so that state detected at boot
+        nrfx_power_usb_state_t nrf_usb_state = nrfx_power_usbstatus_get();
+
+        // If state changed
+        if (nrf_usb_state != prev_nrf_usb_state) {
+            // If changed to DISCONNECTED
+            if (nrf_usb_state == NRFX_POWER_USB_STATE_DISCONNECTED) {
+                powerFSM.trigger(EVENT_POWER_DISCONNECTED);
+                NRF_USB = OptFalse;
+            }
+            // If changed to CONNECTED / READY
+            else {
+                powerFSM.trigger(EVENT_POWER_CONNECTED);
+                NRF_USB = OptTrue;
+            }
+
+            // Cache the current state
+            prev_nrf_usb_state = nrf_usb_state;
+        }
+#endif
        // Notify any status instances that are observing us
-        const PowerStatus powerStatus2 =
-            PowerStatus(hasBattery ? OptTrue : OptFalse, batteryLevel->isVbusIn() ? OptTrue : OptFalse,
-                        batteryLevel->isCharging() ? OptTrue : OptFalse, batteryVoltageMv, batteryChargePercent);
+        const PowerStatus powerStatus2 = PowerStatus(
+            hasBattery ? OptTrue : OptFalse, batteryLevel->isVbusIn() || NRF_USB == OptTrue ? OptTrue : OptFalse,
+            batteryLevel->isCharging() || NRF_USB == OptTrue ? OptTrue : OptFalse, batteryVoltageMv, batteryChargePercent);
        LOG_DEBUG("Battery: usbPower=%d, isCharging=%d, batMv=%d, batPct=%d\n", powerStatus2.getHasUSB(),
                  powerStatus2.getIsCharging(), powerStatus2.getBatteryVoltageMv(), powerStatus2.getBatteryChargePercent());
        newStatus.notifyObservers(&powerStatus2);
@@ -477,10 +621,11 @@ void Power::readPowerStatus()

 #endif

-        // If we have a battery at all and it is less than 10% full, force deep sleep if we have more than 10 low readings in
-        // a row
+        // If we have a battery at all and it is less than 0%, force deep sleep if we have more than 10 low readings in
+        // a row. NOTE: min LiIon/LiPo voltage is 2.0 to 2.5V, current OCV min is set to 3100 that is large enough.
+        //
        if (powerStatus2.getHasBattery() && !powerStatus2.getHasUSB()) {
-            if (batteryLevel->getBattVoltage() < MIN_BAT_MILLIVOLTS) {
+            if (batteryLevel->getBattVoltage() < OCV[NUM_OCV_POINTS - 1]) {
                low_voltage_counter++;
                LOG_DEBUG("Low voltage counter: %d/10\n", low_voltage_counter);
                if (low_voltage_counter > 10) {
@@ -540,10 +685,12 @@ int32_t Power::runOnce()
            LOG_DEBUG("Battery removed\n");
        }
        */
+#ifndef T_WATCH_S3 // FIXME - why is this triggering on the T-Watch S3?
        if (PMU->isPekeyLongPressIrq()) {
            LOG_DEBUG("PEK long button press\n");
            screen->setOn(false);
        }
+#endif

        PMU->clearIrqStatus();
    }
@@ -681,7 +828,8 @@ bool Power::axpChipInit()
            // GNSS VDD 3300mV
            PMU->setPowerChannelVoltage(XPOWERS_ALDO3, 3300);
            PMU->enablePowerOutput(XPOWERS_ALDO3);
-        } else if (HW_VENDOR == meshtastic_HardwareModel_LILYGO_TBEAM_S3_CORE) {
+        } else if (HW_VENDOR == meshtastic_HardwareModel_LILYGO_TBEAM_S3_CORE ||
+                   HW_VENDOR == meshtastic_HardwareModel_T_WATCH_S3) {
            // t-beam s3 core
            /**
             * gnss module power channel
@@ -712,10 +860,16 @@ bool Power::axpChipInit()
            PMU->setPowerChannelVoltage(XPOWERS_ALDO1, 3300);
            PMU->enablePowerOutput(XPOWERS_ALDO1);

-            // sdcard power channle
+            // sdcard power channel
            PMU->setPowerChannelVoltage(XPOWERS_BLDO1, 3300);
            PMU->enablePowerOutput(XPOWERS_BLDO1);

+#ifdef T_WATCH_S3
+            // DRV2605 power channel
+            PMU->setPowerChannelVoltage(XPOWERS_BLDO2, 3300);
+            PMU->enablePowerOutput(XPOWERS_BLDO2);
+#endif
+
            // PMU->setPowerChannelVoltage(XPOWERS_DCDC4, 3300);
            // PMU->enablePowerOutput(XPOWERS_DCDC4);

@@ -839,4 +993,4 @@ bool Power::axpChipInit()
 #else
    return false;
 #endif
-}
+}
@@ -1,5 +1,14 @@
+/**
+ * @file PowerFSM.cpp
+ * @brief Implements the finite state machine for power management.
+ *
+ * This file contains the implementation of the finite state machine (FSM) for power management.
+ * The FSM controls the power states of the device, including SDS (shallow deep sleep), LS (light sleep),
+ * NB (normal mode), and POWER (powered mode). The FSM also handles transitions between states and
+ * actions to be taken upon entering or exiting each state.
+ */
 #include "PowerFSM.h"
-#include "GPS.h"
+#include "Default.h"
 #include "MeshService.h"
 #include "NodeDB.h"
 #include "configuration.h"
@@ -8,6 +17,10 @@
 #include "sleep.h"
 #include "target_specific.h"

+#ifndef SLEEP_TIME
+#define SLEEP_TIME 30
+#endif
+
 /// Should we behave as if we have AC power now?
 static bool isPowered()
 {
@@ -37,7 +50,7 @@ static void sdsEnter()
 {
    LOG_DEBUG("Enter state: SDS\n");
    // FIXME - make sure GPS and LORA radio are off first - because we want close to zero current draw
-    doDeepSleep(getConfiguredOrDefaultMs(config.power.sds_secs));
+    doDeepSleep(Default::getConfiguredOrDefaultMs(config.power.sds_secs), false);
 }

 extern Power *power;
@@ -72,7 +85,7 @@ static void lsIdle()
        // If some other service would stall sleep, don't let sleep happen yet
        if (doPreflightSleep()) {
            // Briefly come out of sleep long enough to blink the led once every few seconds
-            uint32_t sleepTime = 30;
+            uint32_t sleepTime = SLEEP_TIME;

            setLed(false); // Never leave led on while in light sleep
            esp_sleep_source_t wakeCause2 = doLightSleep(sleepTime * 1000LL);
@@ -94,9 +107,7 @@ static void lsIdle()
                break;

            default:
-                // We woke for some other reason (button press, device interrupt)
-                // uint64_t status = esp_sleep_get_ext1_wakeup_status();
-                LOG_INFO("wakeCause2 %d\n", wakeCause2);
+                // We woke for some other reason (button press, device IRQ interrupt)

 #ifdef BUTTON_PIN
                bool pressed = !digitalRead(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN);
@@ -128,16 +139,16 @@ static void lsIdle()
 static void lsExit()
 {
    LOG_INFO("Exit state: LS\n");
-    // setGPSPower(true); // restore GPS power
-    if (gps)
-        gps->forceWake(true);
 }

 static void nbEnter()
 {
    LOG_DEBUG("Enter state: NB\n");
    screen->setOn(false);
+#ifdef ARCH_ESP32
+    // Only ESP32 should turn off bluetooth
    setBluetoothEnable(false);
+#endif

    // FIXME - check if we already have packets for phone and immediately trigger EVENT_PACKETS_FOR_PHONE
 }
@@ -158,12 +169,14 @@ static void serialEnter()

 static void serialExit()
 {
+    // Turn bluetooth back on when we leave serial stream API
+    setBluetoothEnable(true);
    screen->print("Serial disconnected\n");
 }

 static void powerEnter()
 {
-    LOG_DEBUG("Enter state: POWER\n");
+    // LOG_DEBUG("Enter state: POWER\n");
    if (!isPowered()) {
        // If we got here, we are in the wrong state - we should be in powered, let that state ahndle things
        LOG_INFO("Loss of power in Powered\n");
@@ -172,10 +185,12 @@ static void powerEnter()
        screen->setOn(true);
        setBluetoothEnable(true);
        // within enter() the function getState() returns the state we came from
-        if (strcmp(powerFSM.getState()->name, "BOOT") != 0 && strcmp(powerFSM.getState()->name, "POWER") != 0 &&
+
+        // Mothballed: print change of power-state to device screen
+        /* if (strcmp(powerFSM.getState()->name, "BOOT") != 0 && strcmp(powerFSM.getState()->name, "POWER") != 0 &&
            strcmp(powerFSM.getState()->name, "DARK") != 0) {
            screen->print("Powered...\n");
-        }
+        }*/
    }
 }

@@ -192,8 +207,10 @@ static void powerExit()
 {
    screen->setOn(true);
    setBluetoothEnable(true);
-    if (!isPowered())
-        screen->print("Unpowered...\n");
+
+    // Mothballed: print change of power-state to device screen
+    /*if (!isPowered())
+        screen->print("Unpowered...\n");*/
 }

 static void onEnter()
@@ -235,6 +252,9 @@ Fsm powerFSM(&stateBOOT);
 void PowerFSM_setup()
 {
    bool isRouter = (config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER ? 1 : 0);
+    bool isTrackerOrSensor = config.device.role == meshtastic_Config_DeviceConfig_Role_TRACKER ||
+                             config.device.role == meshtastic_Config_DeviceConfig_Role_TAK_TRACKER ||
+                             config.device.role == meshtastic_Config_DeviceConfig_Role_SENSOR;
    bool hasPower = isPowered();

    LOG_INFO("PowerFSM init, USB power=%d\n", hasPower ? 1 : 0);
@@ -242,7 +262,11 @@ void PowerFSM_setup()

    // wake timer expired or a packet arrived
    // if we are a router node, we go to NB (no need for bluetooth) otherwise we go to DARK (so we can send message to phone)
+#ifdef ARCH_ESP32
    powerFSM.add_transition(&stateLS, isRouter ? &stateNB : &stateDARK, EVENT_WAKE_TIMER, NULL, "Wake timer");
+#else // Don't go into a no-bluetooth state on low power platforms
+    powerFSM.add_transition(&stateLS, &stateDARK, EVENT_WAKE_TIMER, NULL, "Wake timer");
+#endif

    // We need this transition, because we might not transition if we were waiting to enter light-sleep, because when we wake from
    // light sleep we _always_ transition to NB or dark and
@@ -279,7 +303,8 @@ void PowerFSM_setup()
    powerFSM.add_transition(&stateLS, &stateON, EVENT_INPUT, NULL, "Input Device");
    powerFSM.add_transition(&stateNB, &stateON, EVENT_INPUT, NULL, "Input Device");
    powerFSM.add_transition(&stateDARK, &stateON, EVENT_INPUT, NULL, "Input Device");
-    powerFSM.add_transition(&stateON, &stateON, EVENT_INPUT, NULL, "Input Device"); // restarts the sleep timer
+    powerFSM.add_transition(&stateON, &stateON, EVENT_INPUT, NULL, "Input Device");       // restarts the sleep timer
+    powerFSM.add_transition(&statePOWER, &statePOWER, EVENT_INPUT, NULL, "Input Device"); // restarts the sleep timer

    powerFSM.add_transition(&stateDARK, &stateON, EVENT_BLUETOOTH_PAIR, NULL, "Bluetooth pairing");
    powerFSM.add_transition(&stateON, &stateON, EVENT_BLUETOOTH_PAIR, NULL, "Bluetooth pairing");
@@ -323,34 +348,47 @@ void PowerFSM_setup()

    powerFSM.add_transition(&stateDARK, &stateDARK, EVENT_CONTACT_FROM_PHONE, NULL, "Contact from phone");

-    powerFSM.add_timed_transition(&stateON, &stateDARK,
-                                  getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs), NULL,
-                                  "Screen-on timeout");
-    powerFSM.add_timed_transition(&statePOWER, &stateDARK,
-                                  getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs), NULL,
-                                  "Screen-on timeout");
-    powerFSM.add_timed_transition(&stateDARK, &stateDARK,
-                                  getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs), NULL,
-                                  "Screen-on timeout");
-
-#ifdef ARCH_ESP32
-    State *lowPowerState = &stateLS;
-    // We never enter light-sleep or NB states on NRF52 (because the CPU uses so little power normally)
-
-    // See: https://github.com/meshtastic/firmware/issues/1071
-    if (isRouter || config.power.is_power_saving) {
-        powerFSM.add_timed_transition(&stateNB, &stateLS,
-                                      getConfiguredOrDefaultMs(config.power.min_wake_secs, default_min_wake_secs), NULL,
-                                      "Min wake timeout");
-        powerFSM.add_timed_transition(&stateDARK, &stateLS,
-                                      getConfiguredOrDefaultMs(config.power.wait_bluetooth_secs, default_wait_bluetooth_secs),
-                                      NULL, "Bluetooth timeout");
+#ifdef USE_EINK
+    // Allow E-Ink devices to suppress the screensaver, if screen timeout set to 0
+    if (config.display.screen_on_secs > 0)
+#endif
+    {
+        powerFSM.add_timed_transition(&stateON, &stateDARK,
+                                      Default::getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs),
+                                      NULL, "Screen-on timeout");
+        powerFSM.add_timed_transition(&statePOWER, &stateDARK,
+                                      Default::getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs),
+                                      NULL, "Screen-on timeout");
    }

-    if (config.power.sds_secs != UINT32_MAX)
-        powerFSM.add_timed_transition(lowPowerState, &stateSDS, getConfiguredOrDefaultMs(config.power.sds_secs), NULL,
-                                      "mesh timeout");
+// We never enter light-sleep or NB states on NRF52 (because the CPU uses so little power normally)
+#ifdef ARCH_ESP32
+    // See: https://github.com/meshtastic/firmware/issues/1071
+    // Don't add power saving transitions if we are a power saving tracker or sensor. Sleep will be initiatiated through the
+    // modules
+    if ((isRouter || config.power.is_power_saving) && !isTrackerOrSensor) {
+        powerFSM.add_timed_transition(&stateNB, &stateLS,
+                                      Default::getConfiguredOrDefaultMs(config.power.min_wake_secs, default_min_wake_secs), NULL,
+                                      "Min wake timeout");
+
+        // If ESP32 and using power-saving, timer mover from DARK to light-sleep
+        // Also serves purpose of the old DARK to DARK transition(?) See https://github.com/meshtastic/firmware/issues/3517
+        powerFSM.add_timed_transition(
+            &stateDARK, &stateLS,
+            Default::getConfiguredOrDefaultMs(config.power.wait_bluetooth_secs, default_wait_bluetooth_secs), NULL,
+            "Bluetooth timeout");
+    } else {
+        // If ESP32, but not using power-saving, check periodically if config has drifted out of stateDark
+        powerFSM.add_timed_transition(&stateDARK, &stateDARK,
+                                      Default::getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs),
+                                      NULL, "Screen-on timeout");
+    }
+#else
+    // If not ESP32, light-sleep not used. Check periodically if config has drifted out of stateDark
+    powerFSM.add_timed_transition(&stateDARK, &stateDARK,
+                                  Default::getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs), NULL,
+                                  "Screen-on timeout");
 #endif

-    powerFSM.run_machine(); // run one interation of the state machine, so we run our on enter tasks for the initial DARK state
+    powerFSM.run_machine(); // run one iteration of the state machine, so we run our on enter tasks for the initial DARK state
 }
--- a/Show More
+++ b/Show More