Merge branch 'develop' into t-display-s3-pro

Co-authored-by: Copilot <copilot@github.com>

boards/t-display-s3.json

@@ -0,0 +1,39 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "memory_type": "qio_opi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "esp32s3"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "LilyGO T-Display S3 Pro LR1121 (16 MB FLASH, 8 MB PSRAM)",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 16777216,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://lilygo.cc/en-de/products/t-display-s3-pro-lr1121",
+  "vendor": "LilyGO"
+}

platformio.ini

@@ -127,7 +127,7 @@ lib_deps =
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/4bf593a82100b911ff816dddf7158ffdee2114cd.zip
+	https://github.com/meshtastic/device-ui/archive/91d4f76d9fc523fb86ea31ebf48fd4bcdaea43c9.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]

src/Power.cpp

@@ -176,6 +176,12 @@ XPowersPPM *PPM = NULL;
 #include "bq27220.h"
 #endif
 
+#ifdef HAS_SY6970
+#include "hardware/Arduino_HWIIC.h"
+#include "power_chip/Arduino_SY6970.h"
+Arduino_SY6970 *SY6970 = NULL;
+#endif
+
 #ifdef HAS_PMU
 XPowersLibInterface *PMU = NULL;
 #else
@@ -1591,7 +1597,7 @@ bool Power::cw2015Init()
 }
 #endif
 
-#if defined(HAS_PPM) && HAS_PPM
+#ifdef HAS_PPM
 
 /**
  * Adapter class for BQ25896/BQ27220 Lipo battery charger.
@@ -1708,6 +1714,96 @@ class LipoCharger : public HasBatteryLevel
     }
 };
 
+#elif defined(HAS_SY6970)
+
+/**
+ * Adapter class for SY6970 battery charger.
+ */
+class LipoCharger : public HasBatteryLevel
+{
+  public:
+    /**
+     * Init the I2C SY6970 Lipo battery charger
+     */
+    bool runOnce()
+    {
+        if (SY6970 == nullptr) {
+            SY6970 = new Arduino_SY6970(std::make_shared<Arduino_HWIIC>(Arduino_HWIIC(SDA, SCL, &Wire)), SY6970_DEVICE_ADDRESS);
+            bool result = SY6970->begin();
+            if (result) {
+                // some boards can boot with HIZ set, which suppresses normal input/battery behavior
+                result |=
+                    SY6970->IIC_Write_Device_State(Arduino_IIC_Power::POWER_DEVICE_HIZ_MODE, Arduino_IIC_Power::POWER_DEVICE_OFF);
+                result |= SY6970->IIC_Write_Device_State(Arduino_IIC_Power::POWER_DEVICE_CHARGING_MODE,
+                                                         Arduino_IIC_Power::POWER_DEVICE_ON);
+                result |= SY6970->IIC_Write_Device_State(Arduino_IIC_Power::POWER_DEVICE_ADC_MEASURE,
+                                                         Arduino_IIC_Power::POWER_DEVICE_ON);
+                // clear watchdog timer once, then keep watchdog disabled
+                result |= SY6970->IIC_Write_Device_State(Arduino_IIC_Power::POWER_DEVICE_WATCHDOG_TIMER_RESET,
+                                                         Arduino_IIC_Power::POWER_DEVICE_ON);
+
+                if (result) {
+                    SY6970->IIC_Write_Device_Value(Arduino_IIC_Power::POWER_DEVICE_WATCHDOG_TIMER, 0);
+                    SY6970->IIC_Write_Device_Value(Arduino_IIC_Power::POWER_DEVICE_CHARGING_TARGET_VOLTAGE_LIMIT, 4284);
+                    SY6970->IIC_Write_Device_Value(Arduino_IIC_Power::POWER_DEVICE_MINIMUM_SYSTEM_VOLTAGE_LIMIT, 3300);
+                    SY6970->IIC_Write_Device_Value(Arduino_IIC_Power::POWER_DEVICE_INPUT_CURRENT_LIMIT, 500);
+                    SY6970->IIC_Write_Device_Value(Arduino_IIC_Power::POWER_DEVICE_FAST_CHARGING_CURRENT_LIMIT, 2112);
+                    SY6970->IIC_Write_Device_Value(Arduino_IIC_Power::POWER_DEVICE_PRECHARGE_CHARGING_CURRENT_LIMIT, 192);
+                    SY6970->IIC_Write_Device_Value(Arduino_IIC_Power::POWER_DEVICE_TERMINATION_CHARGING_CURRENT_LIMIT, 320);
+                    LOG_INFO("SY6970 init succeeded");
+                    return true;
+                }
+            }
+            LOG_WARN("SY6970 init failed");
+            delete SY6970;
+            SY6970 = nullptr;
+            return false;
+        }
+        return true;
+    }
+
+    /**
+     * Battery state of charge, from 0 to 100 or -1 for unknown
+     */
+    virtual int getBatteryPercent() override { return -1; }
+
+    /**
+     * The raw voltage of the battery in millivolts, or NAN if unknown
+     */
+    virtual uint16_t getBattVoltage() override
+    {
+        double battVoltage = SY6970->IIC_Read_Device_Value(Arduino_IIC_Power::POWER_BATTERY_VOLTAGE);
+        return (battVoltage > 0.0) ? static_cast<uint16_t>(battVoltage) : 0;
+    }
+
+    /**
+     * return true if there is a battery installed in this unit
+     */
+    virtual bool isBatteryConnect() override { return true; }
+
+    /**
+     * return true if there is an external power source detected
+     */
+    virtual bool isVbusIn() override { return SY6970->IIC_Read_Device_Value(Arduino_IIC_Power::POWER_SYSTEM_VOLTAGE) > 4200.0; }
+
+    /**
+     * return true if the battery is currently charging
+     */
+    virtual bool isCharging() override { return SY6970->IIC_Read_Device_Value(Arduino_IIC_Power::POWER_CHARGING_CURRENT) > 1.0; }
+};
+
+#else
+
+/**
+ * The Lipo battery level sensor is unavailable - default to AnalogBatteryLevel
+ */
+bool Power::lipoChargerInit()
+{
+    return false;
+}
+#endif
+
+#if defined(HAS_PPM) || defined(HAS_SY6970)
 LipoCharger lipoCharger;
 
 /**
@@ -1716,21 +1812,12 @@ LipoCharger lipoCharger;
 bool Power::lipoChargerInit()
 {
     bool result = lipoCharger.runOnce();
-    LOG_DEBUG("Power::lipoChargerInit lipo sensor is %s", result ? "ready" : "not ready yet");
+    LOG_DEBUG("Power::lipoChargerInit lipo charger is %s", result ? "ready" : "not ready yet");
     if (!result)
         return false;
     batteryLevel = &lipoCharger;
     return true;
 }
-
-#else
-/**
- * The Lipo battery level sensor is unavailable - default to AnalogBatteryLevel
- */
-bool Power::lipoChargerInit()
-{
-    return false;
-}
 #endif
 
 #ifdef HELTEC_MESH_SOLAR

src/configuration.h

@@ -274,6 +274,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LTR553ALS_ADDR 0x23
 #define SEN5X_ADDR 0x69
 #define SCD30_ADDR 0x61
+#define SY6970_ADDR 0x6A // same address as LSM6DS3
 
 // -----------------------------------------------------------------------------
 // ACCELEROMETER

src/detect/ScanI2C.h

@@ -97,6 +97,7 @@ class ScanI2C
         CW2015,
         SCD30,
         ADS1115,
+        SY6970
     } DeviceType;
 
     // typedef uint8_t DeviceAddress;

src/detect/ScanI2CTwoWire.cpp

@@ -607,7 +607,23 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
 
                 break;
 
-                SCAN_SIMPLE_CASE(LSM6DS3_ADDR, LSM6DS3, "LSM6DS3", (uint8_t)addr.address);
+            case LSM6DS3_ADDR: {
+                // 1) Try SY6970 signature first: REG14[5:3] == 0b001
+                uint8_t registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x14), 1);
+                if (((registerValue >> 3) & 0x07) == 0x01) {
+                    type = SY6970;
+                    logFoundDevice("SY6970", (uint8_t)addr.address);
+                    break;
+                }
+
+                // 2) Fallback to LSM6DS3 signature: WHO_AM_I == 0x6A
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0F), 1);
+                if (registerValue == 0x6A) {
+                    type = LSM6DS3;
+                    logFoundDevice("LSM6DS3", (uint8_t)addr.address);
+                }
+                break;
+            }
                 SCAN_SIMPLE_CASE(VEML7700_ADDR, VEML7700, "VEML7700", (uint8_t)addr.address);
             case TCA9555_ADDR:
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x01), 1);

src/graphics/TFTDisplay.cpp

@@ -1606,7 +1606,7 @@ bool TFTDisplay::connect()
     attachInterrupt(digitalPinToInterrupt(SCREEN_TOUCH_INT), rak14014_tpIntHandle, FALLING);
 #elif defined(T_DECK) || defined(PICOMPUTER_S3) || defined(CHATTER_2) || defined(HELTEC_MESH_NODE_T096)
     tft->setRotation(1); // T-Deck has the TFT in landscape
-#elif defined(T_WATCH_S3)
+#elif defined(T_WATCH_S3) || defined(T_DISPLAY_S3_PRO)
     tft->setRotation(2); // T-Watch S3 left-handed orientation
 #elif ARCH_PORTDUINO || defined(SENSECAP_INDICATOR) || defined(T_LORA_PAGER)
     tft->setRotation(0); // use config.yaml to set rotation

src/mesh/NodeDB.cpp

@@ -927,7 +927,7 @@ void NodeDB::installDefaultConfig(bool preserveKey = false)
     strncpy(config.network.ntp_server, "meshtastic.pool.ntp.org", 32);
 
 #if (defined(T_DECK) || defined(T_WATCH_S3) || defined(UNPHONE) || defined(PICOMPUTER_S3) || defined(SENSECAP_INDICATOR) ||      \
-     defined(ELECROW_PANEL) || defined(HELTEC_V4_TFT) || defined(HELTEC_V4_R8_TFT)) &&                                           \
+     defined(ELECROW_PANEL) || defined(HELTEC_V4_TFT) || defined(HELTEC_V4_R8_TFT) || defined(T_DISPLAY_S3_PRO)) &&              \
     HAS_TFT
     // switch BT off by default; use TFT programming mode or hotkey to enable
     config.bluetooth.enabled = false;

variants/esp32s3/tdisplay-s3pro/pins_arduino.h

@@ -0,0 +1,19 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+#define USB_VID 0x303a
+#define USB_PID 0x1001
+
+// used for keyboard, battery gauge, charger and haptic driver
+static const uint8_t SDA = 5;
+static const uint8_t SCL = 6;
+
+// Default SPI will be mapped to Radio
+static const uint8_t SS = 7;
+static const uint8_t MOSI = 17;
+static const uint8_t MISO = 8;
+static const uint8_t SCK = 18;
+
+#endif /* Pins_Arduino_h */

variants/esp32s3/tdisplay-s3pro/platformio.ini

@@ -0,0 +1,84 @@
+; LilyGo T-Display S3 Pro LR1121
+[env:tdisplay-s3-pro]
+custom_meshtastic_hw_model = 126
+custom_meshtastic_hw_model_slug = T_DISPLAY_S3_PRO
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = LILYGO T-Display S3 Pro
+custom_meshtastic_images = lilygo-tdisplay-s3-pro.svg
+custom_meshtastic_tags = LilyGo
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 16MB
+
+extends = esp32s3_base
+board = t-display-s3
+board_check = true
+board_build.partitions = default_16MB.csv
+upload_protocol = esptool
+
+build_src_filter =
+  ${esp32s3_base.build_src_filter}
+  +<../variants/esp32s3/tdisplay-s3pro>
+
+build_flags = ${esp32s3_base.build_flags} 
+  -I variants/esp32s3/tdisplay-s3pro
+  -D T_DISPLAY_S3_PRO 
+  -D BOARD_HAS_PSRAM
+  -D HAS_SDCARD
+
+lib_deps = ${esp32s3_base.lib_deps}
+  # renovate: datasource=github-tags depName=LovyanGFX packageName=https://github.com/lovyan03/LovyanGFX
+  https://github.com/lovyan03/LovyanGFX/archive/refs/tags/1.2.21.zip
+  # renovate: datasource=git-refs depName=ESP8266Audio packageName=https://github.com/meshtastic/ESP8266Audio gitBranch=meshtastic-2.0.0-dacfix
+  https://github.com/meshtastic/ESP8266Audio/archive/343024632ee78d6216907b2353fc943a62422d80.zip
+  # renovate: datasource=github-tags depName=ESP8266SAM packageName=https://github.com/earlephilhower/ESP8266SAM
+  https://github.com/earlephilhower/ESP8266SAM/archive/refs/tags/1.1.0.zip
+  # renovate: datasource=github-tags depName=SensorLib packageName=https://github.com/lewisxhe/SensorLib
+  https://github.com/lewisxhe/SensorLib/archive/refs/tags/v0.4.1.zip
+  # renovate: datasource=github-tags depName=Arduino_DriveBus packageName=https://github.com/yuttapichai/Arduino_DriveBus
+  https://github.com/yuttapichai/Arduino_DriveBus/archive/refs/tags/1.1.5.zip
+
+[env:tdisplay-s3-pro-tft]
+board_level = extra
+extends = env:tdisplay-s3-pro
+build_flags =
+  ${env:tdisplay-s3-pro.build_flags}
+  -D CONFIG_DISABLE_HAL_LOCKS=1
+  -D INPUTDRIVER_ENCODER_TYPE=2
+  -D INPUTDRIVER_ENCODER_LEFT=12
+  -D INPUTDRIVER_ENCODER_RIGHT=16
+  -D INPUTDRIVER_ENCODER_BTN=0
+  -D INDEV_EVENT_TRIGGER=LV_EVENT_CLICKED
+  -D HAS_SCREEN=1
+  -D HAS_TFT=1
+  -D USE_I2S_BUZZER
+  -D RAM_SIZE=5120
+  -D LV_LVGL_H_INCLUDE_SIMPLE
+  -D LV_CONF_INCLUDE_SIMPLE
+  -D LV_COMP_CONF_INCLUDE_SIMPLE
+  -D LV_USE_SYSMON=0
+  -D LV_USE_PROFILER=0
+  -D LV_USE_PERF_MONITOR=0
+  -D LV_USE_MEM_MONITOR=0
+  -D LV_USE_LOG=0
+  -D USE_LOG_DEBUG
+  -D LOG_DEBUG_INC=\"DebugConfiguration.h\"
+  -D RADIOLIB_SPI_PARANOID=0
+  -D LGFX_SCREEN_WIDTH=222
+  -D LGFX_SCREEN_HEIGHT=480
+  -D LGFX_BUFSIZE=617460
+  -D DISPLAY_SIZE=480x222 ; landscape mode
+  -D DISPLAY_SET_RESOLUTION
+  -D LGFX_DRIVER=LGFX_TDISPLAY_S3PRO
+  -D GFX_DRIVER_INC=\"graphics/LGFX/LGFX_T_DISPLAY_S3_PRO.h\"
+;  -D LVGL_DRIVER=LVGL_TDISPLAY_S3PRO
+;  -D LV_USE_ST7796=1
+  -D VIEW_480x222
+  -D CUSTOM_TOUCH_DRIVER
+  -D USE_PACKET_API
+  -D MAP_FULL_REDRAW
+
+lib_deps =
+  ${env:tdisplay-s3-pro.lib_deps}
+  ${device-ui_base.lib_deps}

variants/esp32s3/tdisplay-s3pro/rfswitch.h

@@ -0,0 +1,11 @@
+#include "RadioLib.h"
+
+static const uint32_t rfswitch_dio_pins[] = {RADIOLIB_LR11X0_DIO5, RADIOLIB_LR11X0_DIO6, RADIOLIB_NC, RADIOLIB_NC, RADIOLIB_NC};
+
+static const Module::RfSwitchMode_t rfswitch_table[] = {
+    // mode                  DIO5  DIO6
+    {LR11x0::MODE_STBY, {LOW, LOW}},  {LR11x0::MODE_RX, {HIGH, LOW}},
+    {LR11x0::MODE_TX, {LOW, HIGH}},   {LR11x0::MODE_TX_HP, {LOW, HIGH}},
+    {LR11x0::MODE_TX_HF, {LOW, LOW}}, {LR11x0::MODE_GNSS, {LOW, LOW}},
+    {LR11x0::MODE_WIFI, {LOW, LOW}},  END_OF_MODE_TABLE,
+};

variants/esp32s3/tdisplay-s3pro/variant.cpp

@@ -0,0 +1,57 @@
+#include "variant.h"
+#include "Arduino.h"
+#include "configuration.h"
+
+void earlyInitVariant()
+{
+    pinMode(LORA_CS, OUTPUT);
+    digitalWrite(LORA_CS, HIGH);
+    pinMode(SDCARD_CS, OUTPUT);
+    digitalWrite(SDCARD_CS, HIGH);
+    pinMode(TFT_CS, OUTPUT);
+    digitalWrite(TFT_CS, HIGH);
+    pinMode(MAX98357A_EN, OUTPUT);
+    digitalWrite(MAX98357A_EN, HIGH);
+}
+
+#ifdef HAS_CST226SE // only for BaseUI
+
+#include "TouchDrvCSTXXX.hpp"
+#include "input/TouchScreenImpl1.h"
+#include <Wire.h>
+
+TouchDrvCSTXXX tsPanel;
+static constexpr uint8_t PossibleAddresses[2] = {CST328_ADDR, CST226SE_ADDR_ALT};
+uint8_t i2cAddress = 0;
+
+bool readTouch(int16_t *x, int16_t *y)
+{
+    int16_t x_array[1], y_array[1];
+    uint8_t touched = tsPanel.getPoint(x_array, y_array, 1);
+    if (touched > 0) {
+        *y = x_array[0];
+        *x = (TFT_WIDTH - y_array[0]);
+        // Check bounds
+        if (*x < 0 || *x >= TFT_WIDTH || *y < 0 || *y >= TFT_HEIGHT) {
+            return false;
+        }
+        return true; // Valid touch detected
+    }
+    return false; // No valid touch data
+}
+
+void lateInitVariant()
+{
+    tsPanel.setTouchDrvModel(TouchDrv_CST226);
+    for (uint8_t addr : PossibleAddresses) {
+        if (tsPanel.begin(Wire, addr, I2C_SDA, I2C_SCL)) {
+            i2cAddress = addr;
+            LOG_DEBUG("CST226SE init OK at address 0x%02X", addr);
+            touchScreenImpl1 = new TouchScreenImpl1(TFT_WIDTH, TFT_HEIGHT, readTouch);
+            touchScreenImpl1->init();
+            return;
+        }
+    }
+    LOG_ERROR("CST226SE init failed at all known addresses");
+}
+#endif

variants/esp32s3/tdisplay-s3pro/variant.h

@@ -0,0 +1,125 @@
+// ST7796 TFT LCD
+#define TFT_CS 39
+#define ST7796_CS TFT_CS
+#define ST7796_RS 9     // DC
+#define ST7796_SDA MOSI // MOSI
+#define ST7796_SCK SCK
+#define ST7796_RESET -1
+#define ST7796_MISO MISO
+#define ST7796_BUSY -1
+#define ST7796_BL 48
+#define ST7796_SPI_HOST SPI2_HOST
+#define TFT_BL 48
+#define SPI_FREQUENCY 75000000
+#define SPI_READ_FREQUENCY 16000000
+#define TFT_HEIGHT 480
+#define TFT_WIDTH 222
+#define TFT_OFFSET_X 49
+#define TFT_OFFSET_Y 0
+#define TFT_OFFSET_ROTATION 3
+#define SCREEN_ROTATE
+#define SCREEN_TRANSITION_FRAMERATE 5
+#define BRIGHTNESS_DEFAULT 130 // Medium Low Brightness
+#define USE_TFTDISPLAY 1
+
+#define I2C_SDA SDA
+#define I2C_SCL SCL
+
+// #define I2C_SDA1
+// #define I2C_SCL1
+
+#define USE_POWERSAVE
+#define SLEEP_TIME 120
+
+#define LED_POWER 38 // green
+#define PIN_POWER_EN 42
+
+// GNSS
+#define GPS_DEFAULT_NOT_PRESENT 1
+
+// PCF85063 RTC Module
+#define PCF85063_RTC 0x51
+
+// SY6970 battery charger
+#define HAS_SY6970
+#define SY6970_INT 21
+
+// MAX98357A PCM amplifier
+#define HAS_I2S
+#define DAC_I2S_BCK 4
+#define DAC_I2S_WS 15
+#define DAC_I2S_DOUT 11
+#define DAC_I2S_MCLK 13 // not used
+#define MAX98357A_EN 41
+
+// ICM20948 motion tracker
+#define ICM20948_ADDRESS 0x28
+#define ICM20948_INT 21
+
+// MP34DT05TRF MEMS mic
+#define MP34DT05TR_LRCLK 1
+#define MP34DT05TR_DATA 2
+#define MP34DT05TR_EN 3
+
+#define BUTTON_PIN 16
+#define BUTTON_NEED_PULLUP
+#define ALT_BUTTON_PIN 12
+#define ALT_BUTTON_ACTIVE_LOW true
+#define ALT_BUTTON_ACTIVE_PULLUP true
+#define PIN_BUTTON3 0
+
+// vibration motor
+#define PIN_VIBRATION 45
+
+// SPI interface SD card slot
+#define SPI_MOSI MOSI
+#define SPI_SCK SCK
+#define SPI_MISO MISO
+#define SPI_CS 14
+#define SDCARD_CS SPI_CS
+#define SD_SPI_FREQUENCY 75000000U
+
+// LoRa
+// #define USE_SX1262
+// #define USE_SX1268
+// #define USE_SX1280
+#define USE_LR1121
+
+#define LORA_SCK 18
+#define LORA_MISO 8
+#define LORA_MOSI 17
+#define LORA_CS 7
+#define LORA_RESET 10
+
+#define LORA_DIO0 -1 // a No connect on the SX1262 module
+#define LORA_DIO1 40 // SX1262 IRQ
+#define LORA_DIO2 46 // SX1262 BUSY
+#define LORA_DIO3    // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+#define SX126X_CS LORA_CS
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY LORA_DIO2
+#define SX126X_RESET LORA_RESET
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 3.0
+#endif
+
+#ifdef USE_SX1280
+#define SX128X_CS LORA_CS
+#define SX128X_DIO1 LORA_DIO1
+#define SX128X_BUSY LORA_DIO2
+#define SX128X_RESET LORA_RESET
+#endif
+
+#ifdef USE_LR1121
+#define LR1121_IRQ_PIN LORA_DIO1
+#define LR1121_NRESET_PIN LORA_RESET
+#define LR1121_BUSY_PIN LORA_DIO2
+#define LR1121_SPI_NSS_PIN LORA_CS
+#define LR1121_SPI_SCK_PIN LORA_SCK
+#define LR1121_SPI_MOSI_PIN LORA_MOSI
+#define LR1121_SPI_MISO_PIN LORA_MISO
+#define LR11X0_DIO3_TCXO_VOLTAGE 3.0
+#define LR11X0_DIO_AS_RF_SWITCH
+#endif