Compare commits
1
Commits
| Author | SHA1 | Date | |
|---|---|---|---|
 Ben Meadors
|
96a119cdd8 |
@@ -1,49 +0,0 @@
|
||||
# Claude Code slash commands for the mcp-server test suite
|
||||
|
||||
Three AI-assisted workflows wrapping `mcp-server/run-tests.sh` and the meshtastic MCP tools. Each one has a twin in `.github/prompts/` for Copilot users.
|
||||
|
||||
| Slash command | What it does | Copilot equivalent |
|
||||
| --------------------- | ------------------------------------------------------------------------- | ---------------------------------------- |
|
||||
| `/test [args]` | Runs the test suite (auto-detects hardware) and interprets failures | `.github/prompts/mcp-test.prompt.md` |
|
||||
| `/diagnose [role]` | Read-only device health report via the meshtastic MCP tools | `.github/prompts/mcp-diagnose.prompt.md` |
|
||||
| `/repro <test> [n=5]` | Re-runs one test N times, diffs firmware logs between passes and failures | `.github/prompts/mcp-repro.prompt.md` |
|
||||
|
||||
## Why two surfaces
|
||||
|
||||
The Claude Code commands and Copilot prompts cover the same three workflows but each speaks its host's idiom:
|
||||
|
||||
- **Claude Code** (`/test`) uses `$ARGUMENTS` for pass-through, has direct access to Bash + all MCP tools registered in the user's settings, and runs in the terminal context.
|
||||
- **Copilot** (`/mcp-test`) runs in VS Code's agent mode; it has terminal + MCP access too but typically asks the operator to confirm inputs interactively.
|
||||
|
||||
A contributor using either IDE gets equivalent assistance. Keep the two in sync when behavior changes — the diff of intent should be minimal.
|
||||
|
||||
## House rules
|
||||
|
||||
- **No destructive writes without explicit operator approval.** Skills that could reflash, factory-reset, or reboot a device must describe the action and stop — the operator authorizes.
|
||||
- **Interpret failures, don't just echo them.** The skill body should pull firmware log lines from `mcp-server/tests/report.html` (the `Meshtastic debug` section, attached by `tests/conftest.py::pytest_runtest_makereport`) and classify the failure.
|
||||
- **Keep MCP tool calls sequential per port.** SerialInterface holds an exclusive port lock; two parallel tool calls on the same port deadlock.
|
||||
- **Never speculate about root cause.** If the evidence doesn't support a classification, say "unknown" and list what you'd need to disambiguate.
|
||||
|
||||
## Adding a new command
|
||||
|
||||
1. Write the Claude Code version at `.claude/commands/<name>.md` with YAML frontmatter:
|
||||
|
||||
```yaml
|
||||
---
|
||||
description: one-line purpose (used for auto-invocation by the model)
|
||||
argument-hint: [optional-hint]
|
||||
---
|
||||
```
|
||||
|
||||
2. Write the Copilot equivalent at `.github/prompts/mcp-<name>.prompt.md` with:
|
||||
|
||||
```yaml
|
||||
---
|
||||
mode: agent
|
||||
description: ...
|
||||
---
|
||||
```
|
||||
|
||||
3. Add the row to the table above. Cross-link in both bodies.
|
||||
|
||||
4. Smoke-test on Claude Code first (`/<name>` should appear in autocomplete), then in VS Code Copilot (`/mcp-<name>` in Chat).
|
||||
@@ -1,68 +0,0 @@
|
||||
---
|
||||
description: Produce a device health report using the meshtastic MCP tools (device_info, list_nodes, get_config, short serial log capture)
|
||||
argument-hint: [role=all|nrf52|esp32s3|<port>]
|
||||
---
|
||||
|
||||
# `/diagnose` — device health report
|
||||
|
||||
Call the meshtastic MCP tool bundle and format a structured health report for one or all detected devices. Zero guesswork for the operator.
|
||||
|
||||
## What to do
|
||||
|
||||
1. **Enumerate hardware.** Call `mcp__meshtastic__list_devices(include_unknown=True)`. For each entry where `likely_meshtastic=True`, capture `port`, `vid`, `pid`, `description`.
|
||||
|
||||
2. **Filter by `$ARGUMENTS`**:
|
||||
- No args, `all` → every likely-meshtastic device.
|
||||
- `nrf52` → only devices with `vid == 0x239a`.
|
||||
- `esp32s3` → only devices with `vid == 0x303a` or `vid == 0x10c4`.
|
||||
- A `/dev/cu.*` path → only that one port.
|
||||
- Anything else → treat as a substring match against the `port` string.
|
||||
|
||||
3. **For each selected device, in sequence (NOT parallel — SerialInterface holds an exclusive port lock):**
|
||||
- `mcp__meshtastic__device_info(port=<p>)` — captures `my_node_num`, `long_name`, `short_name`, `firmware_version`, `hw_model`, `region`, `num_nodes`, `primary_channel`.
|
||||
- `mcp__meshtastic__list_nodes(port=<p>)` — count of peers, which ones have `publicKey` set, SNR/RSSI distribution.
|
||||
- `mcp__meshtastic__get_config(section="lora", port=<p>)` — region, preset, channel_num, tx_power, hop_limit.
|
||||
- Optionally, if the device seems unhappy (fails to connect, `num_nodes==1` when ≥2 are plugged in, missing firmware*version), open a short firmware log window: `mcp__meshtastic__serial_open(port=<p>, env=<inferred-env>)`, wait 3s, `serial_read(session_id=<s>, max_lines=100)`, `serial_close(session_id=<s>)`. The env should be inferred from the VID map in `mcp-server/run-tests.sh` (nrf52 → rak4631, esp32s3 → heltec-v3) unless `MESHTASTIC_MCP_ENV*<ROLE>` is set.
|
||||
|
||||
4. **Hub health** (call once, not per-device): `mcp__meshtastic__uhubctl_list()` — enumerates every USB hub the host can see. Note which hubs advertise `ppps=true` and which hub hosts each Meshtastic device (cross-reference by VID). Flag it in the report if:
|
||||
- No hub advertises PPPS → `tests/recovery/` can't run on this setup; hard-recovery via `uhubctl_cycle` isn't available.
|
||||
- A Meshtastic device is on a non-PPPS hub → note it; operator may want to move the device to a PPPS hub to unlock auto-recovery.
|
||||
- `uhubctl_list` raises `ConfigError: uhubctl not found` → just say `uhubctl not installed` in the report; don't treat as a fault.
|
||||
|
||||
5. **Render per-device report** as:
|
||||
|
||||
```text
|
||||
[nrf52 @ /dev/cu.usbmodem1101] fw=2.7.23.bce2825, hw=RAK4631
|
||||
owner : Meshtastic 40eb / 40eb
|
||||
region/band : US, channel 88, LONG_FAST
|
||||
tx_power : 30 dBm, hop_limit=3
|
||||
peers : 1 (esp32s3 0x433c2428, pubkey ✓, SNR 6.0 / RSSI -24 dBm)
|
||||
primary ch : McpTest
|
||||
hub : 1-1.3 port 2 (PPPS, uhubctl-controllable)
|
||||
firmware : no panics in last 3s; NodeInfoModule emitted 2 broadcasts
|
||||
```
|
||||
|
||||
Keep it scannable. If a field is missing or abnormal (no pubkey for a known peer, region=UNSET, num_nodes inconsistent with the hub, device on non-PPPS hub), flag it inline with a short `⚠︎ <one-line reason>`.
|
||||
|
||||
6. **Cross-device correlation** (only when >1 device is inspected):
|
||||
- Do both sides see each other in `nodesByNum`? If one does and the other doesn't, that's asymmetric NodeInfo — flag it.
|
||||
- Do the LoRa configs match? (region, channel_num, modem_preset should all agree; mismatch = no mesh)
|
||||
- Do the primary channel NAMES match? Mismatch = different PSK = no decode.
|
||||
|
||||
7. **Recorder slice (cheap, always available).** The mcp-server runs an autouse log recorder that's been collecting from every connected device. Pull two short slices to surface anything weird that's already happened:
|
||||
- `mcp__meshtastic__logs_window(start="-2m", level="WARN|ERROR|CRIT", max_lines=20)` — recent firmware errors. If empty, say "no recent errors"; don't manufacture concern.
|
||||
- `mcp__meshtastic__telemetry_timeline(window="1h", field="free_heap", max_points=60)` — heap trend. If `slope_per_min < -50`, flag it and recommend `/leakhunt window=6h` for a deeper read; otherwise just note the current free heap.
|
||||
- If `recorder_status` shows `running:false` or `files.telemetry.last_ts` is null, note "recorder has no telemetry yet — enable `set_debug_log_api(True)` to populate" and skip this step gracefully.
|
||||
|
||||
8. **Suggest next actions only for specific, recognisable failure modes**:
|
||||
- Stale PKI pubkey one-way → "run `/test tests/mesh/test_direct_with_ack.py` — the retry + nodeinfo-ping heals this in the test path."
|
||||
- Region mismatch → "re-bake one side via `./mcp-server/run-tests.sh --force-bake`."
|
||||
- Device unreachable, reachable via DFU → `touch_1200bps(port=...)` + `pio_flash`. If not even DFU responds AND the device is on a PPPS hub, escalate to `uhubctl_cycle(role=..., confirm=True)`.
|
||||
- CP2102-wedged-driver on macOS → see the note in `run-tests.sh`.
|
||||
- Heap slope strongly negative → "run `/leakhunt window=6h` for a full timeline + classification."
|
||||
|
||||
## What NOT to do
|
||||
|
||||
- No writes. No `set_config`, no `reboot`, no `factory_reset`. This is a read-only diagnostic skill — if the operator wants to change state, they'll ask explicitly.
|
||||
- No `flash` / `erase_and_flash`. Those are separate escalations.
|
||||
- No holding SerialInterface across tool calls — open, query, close; next device. The port lock is exclusive.
|
||||
@@ -1,103 +0,0 @@
|
||||
---
|
||||
description: Hunt for memory leaks (and other slow degradations) by reading the persistent recorder's heap timeline + log slice over a window
|
||||
argument-hint: [window=1h] [field=free_heap] [variant=local]
|
||||
---
|
||||
|
||||
<!-- markdownlint-disable MD029 -->
|
||||
|
||||
# `/leakhunt` — read the recorder, classify a memory leak
|
||||
|
||||
Use the always-on recorder (`mcp-server/.mtlog/`) to read a heap timeline plus the matching log slice and produce a one-page verdict: **steady / slow leak / fragmentation / OOM-imminent**. No firmware changes, no special build flags — the LocalStats telemetry packet that the firmware already broadcasts every ~60 s carries `heap_free_bytes` and `heap_total_bytes`.
|
||||
|
||||
## Two signal paths — pick the right one
|
||||
|
||||
| Path | Build flag | Cadence | Per-thread attribution | Cost |
|
||||
| --------------------- | ---------------- | -------------- | ---------------------- | ------------------------- |
|
||||
| LocalStats packet | (default) | ~60 s | No | Free — always on |
|
||||
| `[heap N]` log prefix | `-DDEBUG_HEAP=1` | every log line | Yes (Thread X leaked) | Bigger flash + log volume |
|
||||
|
||||
Both feed the same `telemetry_timeline(field="free_heap")` query — when DEBUG_HEAP is on, the recorder synthesizes telemetry rows from log prefixes (tagged `source: debug_heap`), so a single timeline call gets whichever signal is available. **For a slow leak diagnosis, the default path is plenty** (60 s cadence over 6 h = 360 points; linear regression over that nails sub-100-byte/min slopes). **DEBUG_HEAP is for attribution** — when the slope is real and you need to know which thread is leaking.
|
||||
|
||||
## What to do
|
||||
|
||||
1. **Parse `$ARGUMENTS`**: optional `window` (default `1h`, accepts `30m`/`6h`/`-3d`/etc.), optional `field` (default `free_heap`; alternates: `total_heap`, `battery_level`, anything in the LocalStats variant), optional `variant` (default `local`; alternates: `device`, `environment`, `power`, `airQuality`, `health`).
|
||||
|
||||
2. **Verify the recorder is alive** — call `mcp__meshtastic__recorder_status`. Check:
|
||||
- `running == True`
|
||||
- `files.telemetry.lines > 0` (at least one telemetry packet recorded — if zero, the device hasn't broadcast LocalStats yet OR `set_debug_log_api` has never been on; tell the operator to run `mcp__meshtastic__set_debug_log_api(enabled=True)` and wait one device-update interval)
|
||||
- `files.telemetry.last_ts` within the last 5 minutes (if older, the device is silent — log that, not "leak detected")
|
||||
|
||||
3. **Detect whether DEBUG_HEAP is active** — `mcp__meshtastic__logs_window(start="-2m", grep=r"\\[heap \\d+\\]", max_lines=3)`. If any line matches, the firmware has the prefix → DEBUG_HEAP is on, expect higher-cadence data and `heap_event` rows. If zero matches over the last 2 minutes, you're on the LocalStats-only path.
|
||||
|
||||
4. **Pull the timeline** — `mcp__meshtastic__telemetry_timeline(window=$window, variant=$variant, field=$field, max_points=200)`. Read:
|
||||
- `samples` — how many raw points contributed
|
||||
- `min`, `max` — total swing
|
||||
- `slope_per_min` — units per minute (linear regression over the whole window)
|
||||
|
||||
5. **Pull the log context for the same window** — `mcp__meshtastic__logs_window(start="-${window}", grep="Heap status|leaked heap|freed heap|out of memory|Alloc an err|panic|abort", max_lines=200)`. These are the strings the firmware emits when something memory-related happens (`DEBUG_HEAP` builds emit `"Heap status:"` and `"leaked heap"` lines; production builds emit `"Alloc an err"` on failure and `"out of memory"` on OOM).
|
||||
|
||||
6. **Pull marker events** so we know if the operator labeled phases — `mcp__meshtastic__events_window(start="-${window}", kind="mark|connection_lost|connection_established")`. If a `connection_lost` overlaps a sharp drop, that's not a leak; that's a reboot.
|
||||
|
||||
6a. **(DEBUG_HEAP only) Per-thread attribution** — `mcp__meshtastic__logs_window(start="-${window}", grep="leaked heap", max_lines=200)`. Each row has a structured `heap_event` field with `{kind, thread, before, after, delta}`. Aggregate by thread: sum the `delta` over the window per thread name. The thread with the largest cumulative negative delta is your suspect. Note the count too — a thread with 50× small leaks is different from 1× big leak.
|
||||
|
||||
7. **Classify** based on what the data says, NOT on what you wish it said. Use these rules in order:
|
||||
- **Insufficient data** (< 5 samples): say so. Suggest a longer window or longer wait. Stop.
|
||||
- **Reboot mid-window**: if any `connection_lost` event is present AND `free_heap` jumped UP at that timestamp, the device rebooted. Note it; pre-reboot trend may be a leak but you only have part of the curve.
|
||||
- **OOM-imminent**: any `Alloc an err=` or `out of memory` line in the log slice. This trumps everything; flag urgently.
|
||||
- **Slow leak**: `slope_per_min < -50` AND `max - min > 1000` AND no reboot. The heap is monotonically (or near-monotonically) declining. Estimate time-to-zero: `min / -slope_per_min` minutes. Surface it.
|
||||
- **Fragmentation suspect**: `slope_per_min` close to zero (|x| < 50) BUT min trends down across the window AND the log slice shows `Alloc an err` warnings WITHOUT total OOM. Means free total is OK but largest contiguous block is shrinking. Recommend a `DEBUG_HEAP` build to confirm.
|
||||
- **Steady**: |slope_per_min| < 50, no error lines. Heap is fine.
|
||||
- **Recovery curve**: slope is POSITIVE — heap recovered. Either a workload completed or GC fired. Note it; not a leak.
|
||||
|
||||
8. **Report**:
|
||||
|
||||
```text
|
||||
/leakhunt window=6h field=free_heap variant=local
|
||||
────────────────────────────────────────────────────
|
||||
recorder : running, telem last_ts 8s ago
|
||||
build : DEBUG_HEAP=ON (per-line prefix detected)
|
||||
samples : 14,200 over 6h (cadence ~1.5s, log-line synth)
|
||||
free_heap : min 92,344 / max 124,008 / range 31,664
|
||||
slope : -82 bytes/min (negative — heap declining)
|
||||
reboots : none in window
|
||||
OOM events : none
|
||||
error lines : 3× "Alloc an err=ESP_ERR_NO_MEM" at +4h12m, +5h08m, +5h44m
|
||||
thread leaks : (DEBUG_HEAP) MeshPacket -3,124 B over 18 events
|
||||
Router -1,408 B over 4 events
|
||||
others -240 B
|
||||
verdict : SLOW LEAK — primary suspect MeshPacket thread
|
||||
est. time-to-OOM: ~1,127 min (~18.8 h) at current slope
|
||||
evidence : (3 log line citations with uptimes)
|
||||
```
|
||||
|
||||
Then: **what to do next.**
|
||||
- SLOW LEAK, **DEBUG_HEAP off** → recommend rebuilding with the flag and re-running this skill. Concrete one-liner the operator can copy:
|
||||
```text
|
||||
mcp__meshtastic__build(env="<env>", build_flags={"DEBUG_HEAP": 1})
|
||||
mcp__meshtastic__pio_flash(env="<env>", port="<port>", confirm=True)
|
||||
```
|
||||
After flash, set debug_log_api back on and wait one window; re-run `/leakhunt`.
|
||||
- SLOW LEAK, **DEBUG_HEAP on** → cite the top-leaking thread name from step 6a. Point at the corresponding source file (`grep -rn "ThreadName(\"<name>\")" src/`); the operator decides what to fix.
|
||||
- FRAGMENTATION SUSPECT → propose pre-allocating any per-packet buffers; or rebuilding with `CONFIG_HEAP_TASK_TRACKING=y` on ESP32 to see who's holding the largest blocks.
|
||||
- OOM-IMMINENT → flag for immediate attention; don't wait for the next telemetry interval.
|
||||
- STEADY → say so; stop. Don't invent problems.
|
||||
|
||||
## What NOT to do
|
||||
|
||||
- Don't assume a leak from a single dip. LocalStats fires every ~60 s and the firmware naturally allocates+frees on each broadcast cycle; one packet sees the trough. Look at the slope, not the deltas.
|
||||
- Don't recommend code changes. This skill diagnoses; the operator decides what to fix.
|
||||
- Don't enable `set_debug_log_api` automatically — if it's off, telemetry isn't reaching pubsub anyway, and the recorder will be empty. Tell the operator to flip it on and wait, then re-run.
|
||||
- Don't run heavy workloads to "trigger the leak." The recorder is passive; we read what's there.
|
||||
|
||||
## Companion: `mark_event` for stress runs
|
||||
|
||||
If the operator wants to test under stimulus (e.g. blast 50 broadcasts and see what the heap does), they can frame the experiment with markers:
|
||||
|
||||
```text
|
||||
mark_event("burst-start")
|
||||
… run the workload …
|
||||
mark_event("burst-end")
|
||||
/leakhunt window=15m
|
||||
```
|
||||
|
||||
The markers land in both `events.jsonl` and `logs.jsonl`, so the report can show "free_heap dipped 8 KB during the burst window, recovered to baseline within 2 LocalStats cycles" → not a leak.
|
||||
@@ -1,70 +0,0 @@
|
||||
---
|
||||
description: Re-run a specific test N times in isolation to triage flakes, diff firmware logs between passes and failures
|
||||
argument-hint: <test-node-id> [count=5]
|
||||
---
|
||||
|
||||
<!-- markdownlint-disable MD029 -->
|
||||
|
||||
# `/repro` — flakiness triage for one test
|
||||
|
||||
Re-run a single pytest node ID N times in isolation, track pass rate, and surface what's _different_ in the firmware logs between the passing attempts and the failing ones. Turns "it's flaky, I guess" into "it fails when X, passes when Y."
|
||||
|
||||
## What to do
|
||||
|
||||
1. **Parse `$ARGUMENTS`**: first token is the pytest node id (e.g. `tests/mesh/test_direct_with_ack.py::test_direct_with_ack_roundtrip[nrf52->esp32s3]`); second token is an integer count (default `5`, cap at `20`). If the first token doesn't look like a test path (no `::` and no `tests/` prefix), treat the whole `$ARGUMENTS` as a `-k` filter instead.
|
||||
|
||||
2. **Sanity-check the hub first** (so we're not measuring "nothing plugged in" N times): call `mcp__meshtastic__list_devices`. If the test name contains `nrf52` or `esp32s3` and the matching VID isn't present, stop and report — re-running won't help.
|
||||
|
||||
3. **Loop N times**. For each iteration:
|
||||
|
||||
```bash
|
||||
./mcp-server/run-tests.sh <test-id> --tb=short -p no:cacheprovider
|
||||
```
|
||||
|
||||
Capture: exit code, duration, and (on failure) the `Meshtastic debug` firmware log section from `mcp-server/tests/report.html`. `-p no:cacheprovider` suppresses pytest's `.pytest_cache` writes so iterations don't influence each other.
|
||||
|
||||
4. **Track a small structured tally**:
|
||||
|
||||
```text
|
||||
attempt 1: PASS (42s)
|
||||
attempt 2: FAIL (128s) ← firmware log 200-line tail captured
|
||||
attempt 3: PASS (39s)
|
||||
attempt 4: FAIL (121s)
|
||||
attempt 5: PASS (41s)
|
||||
--------------------------------------
|
||||
pass rate: 3/5 (60%) | mean duration: 74s
|
||||
```
|
||||
|
||||
5. **On mixed outcomes**: diff the firmware log tails between a representative passing attempt and a representative failing attempt. Focus on:
|
||||
- Error-level lines only present in failures (`PKI_UNKNOWN_PUBKEY`, `Alloc an err=`, `Skip send`, `No suitable channel`)
|
||||
- Timing around the assertion event — did a broadcast go out, was there an ACK, did NAK fire?
|
||||
- Device state fields that changed (nodesByNum entries, region/preset, channel_num)
|
||||
|
||||
Surface the top 3 differences as a "passes when / fails when" table. Don't dump full logs — pull specific lines with uptime timestamps.
|
||||
|
||||
5a. **Archive recorder slices per attempt** (no extra device interaction; the recorder runs autouse). Right after each attempt finishes, capture its `(start_ts, end_ts)` and call `mcp__meshtastic__recorder_export(start=<start>, end=<end>, dest_dir="mcp-server/tests/repro_artifacts/<safe-test-id>/attempt_<n>/")`. This drops a `logs.jsonl`, `telemetry.jsonl`, `packets.jsonl`, and `events.jsonl` snapshot scoped to the attempt window. Use these for cross-attempt diffs in step 5: `jq '.line' logs.jsonl` is faster than re-running the test, and the telemetry slice lets you compare heap behavior across attempts.
|
||||
|
||||
6. **Classify the flake** into one of:
|
||||
- **LoRa airtime collision** → pass rate improves with fewer concurrent transmitters; propose a `time.sleep` gap or retry bump in the test body.
|
||||
- **PKI key staleness** → fails on first attempt, passes after self-heal; existing retry loop in `test_direct_with_ack.py` handles this.
|
||||
- **NodeInfo cooldown** → `Skip send NodeInfo since we sent it <600s ago` in fail-only logs; needs `broadcast_nodeinfo_ping()` warmup.
|
||||
- **Hardware-specific** (one direction fails, other passes; one device's firmware is older; driver wedged) → specific recovery pointer. For a device that's wedged past `touch_1200bps`, the next escalation is `uhubctl_cycle(role=..., confirm=True)` to hard-power-cycle its hub port (requires `uhubctl` installed).
|
||||
- **Device went dark mid-run** → fails from some attempt onward, never recovers, firmware log stops arriving. Almost always hardware: a Guru crash + frozen CDC. Hard-power-cycle via `uhubctl_cycle(role=..., confirm=True)` before the next iteration; if that also fails, escalate to replug.
|
||||
- **Genuinely unknown** → say so; don't invent a root cause.
|
||||
|
||||
7. **Report back** with:
|
||||
- Pass rate and mean duration.
|
||||
- Classification + evidence (the specific log lines that support it).
|
||||
- A suggested next step (re-run with specific args, open `/diagnose`, edit a specific test file, nothing).
|
||||
|
||||
## Examples
|
||||
|
||||
- `/repro tests/mesh/test_direct_with_ack.py::test_direct_with_ack_roundtrip[esp32s3->nrf52] 10` — runs 10 times, diffs firmware logs.
|
||||
- `/repro broadcast_delivers` — no `::`, no `tests/`, so interpreted as `-k broadcast_delivers`; runs every matching test the default 5 times.
|
||||
- `/repro tests/telemetry/test_device_telemetry_broadcast.py 3` — shorter run for a slow test.
|
||||
|
||||
## Constraints
|
||||
|
||||
- Don't exceed `count=20` per invocation — airtime and USB wear add up. If the user asks for 50, negotiate down.
|
||||
- Don't rebuild firmware as part of triage; flakes that only reproduce under different firmware belong in a separate session.
|
||||
- If the FIRST attempt fails AND the rest all pass, that's a classic "state leak from a prior test" → say so and suggest running with `--force-bake` or starting from a clean state rather than chasing the first failure.
|
||||
@@ -1,47 +0,0 @@
|
||||
---
|
||||
description: Run the mcp-server test suite (auto-detects devices) and interpret the results
|
||||
argument-hint: [pytest-args]
|
||||
---
|
||||
|
||||
# `/test` — mcp-server test runner with interpretation
|
||||
|
||||
Run `mcp-server/run-tests.sh` and make sense of the output so the operator doesn't have to.
|
||||
|
||||
## What to do
|
||||
|
||||
1. **Invoke the wrapper.** From the firmware repo root, run:
|
||||
|
||||
```bash
|
||||
./mcp-server/run-tests.sh $ARGUMENTS
|
||||
```
|
||||
|
||||
The wrapper auto-detects connected Meshtastic devices, maps each to its PlatformIO env, exports the required `MESHTASTIC_MCP_ENV_*` env vars, and invokes pytest. If the user passed no arguments, the wrapper supplies a sensible default set (`tests/ --html=tests/report.html --self-contained-html --junitxml=tests/junit.xml -v --tb=short`). A `--report-log=tests/reportlog.jsonl` arg is always appended (unless the operator passed their own). `--assume-baked` is deliberately NOT in the defaults — `test_00_bake.py` has its own skip-if-already-baked check and runs the ~8 s verification by default. Operators can opt into the fast path with `--assume-baked`, or force a reflash with `--force-bake`.
|
||||
|
||||
2. **Read the pre-flight header.** First ~6 lines print the detected hub (role → port → env). If that line reads `detected hub : (none)`, the wrapper will narrow to `tests/unit` only — say so explicitly in your summary so the operator knows hardware tiers were skipped.
|
||||
|
||||
3. **On pass**: one-line summary of the form `N passed, M skipped in <duration>`. Don't enumerate the test names — the user can read those. Do mention any SKIPPED tests and name the cause:
|
||||
- `"role not present on hub"` → device unplugged; operator knows to reconnect.
|
||||
- `"firmware not baked with USERPREFS_UI_TEST_LOG"` → tests/ui skipped because the macro isn't in firmware yet; suggest `--force-bake`.
|
||||
- `"uhubctl not installed"` → tests/recovery + peer-offline skipped; suggest `brew install uhubctl` / `apt install uhubctl`.
|
||||
- `"no PPPS-capable hubs detected"` → tests/recovery skipped because the hub doesn't support per-port power; the tier will never run on that setup.
|
||||
- `"opencv-python-headless is not installed"` → tests/ui auto-deselected by run-tests.sh; suggest `pip install -e 'mcp-server/.[ui]'`.
|
||||
|
||||
4. **On failure**: for every FAILED test, open `mcp-server/tests/report.html` and extract the `Meshtastic debug` section for that test. pytest-html embeds the firmware log stream + device state dump there; the 200-line firmware log tail is usually enough to explain the failure. Summarise: which test, one-line assertion message, the firmware log lines that matter (things like `PKI_UNKNOWN_PUBKEY`, `Skip send NodeInfo`, `Error=`, `Guru Meditation`, `assertion failed`). For UI-tier failures also glance at `mcp-server/tests/ui_captures/<session>/<test>/transcript.md` — it records each step's frame + OCR.
|
||||
|
||||
5. **Classify the failure** as one of:
|
||||
- **Transient/flake**: LoRa collision, timing-sensitive assertion, first-attempt NAK + successful retry pattern. Propose `/repro <test_node_id>` to confirm.
|
||||
- **Environmental**: device unreachable, port busy, CP2102 driver wedged. Suggest the specific recovery in escalation order: (a) replug USB, (b) `touch_1200bps(port=...)` + `pio_flash` for nRF52 DFU, (c) `uhubctl_cycle(role="nrf52", confirm=True)` when a device is fully wedged past DFU (needs `uhubctl` installed — `baked_single`'s auto-recovery hook does this once automatically). Also check `git status userPrefs.jsonc`.
|
||||
- **Regression**: same assertion fails repeatedly, firmware log shows a new/unusual error. Surface the diff between expected and observed, identify the module likely responsible.
|
||||
|
||||
6. **Never run destructive recovery automatically.** If a failure looks like it needs a reflash, factory*reset, `uhubctl_cycle`, or USB replug, \_describe what to do* — don't execute. The operator decides.
|
||||
|
||||
## Arguments handling
|
||||
|
||||
- No args → wrapper's defaults (full suite).
|
||||
- `$ARGUMENTS` passed verbatim to the wrapper, which passes them to pytest.
|
||||
- Common operator invocations: `/test tests/mesh`, `/test tests/mesh/test_direct_with_ack.py::test_direct_with_ack_roundtrip`, `/test --force-bake`, `/test -k telemetry`.
|
||||
|
||||
## Side-effects to mention in summary
|
||||
|
||||
- The session fixture snapshots `userPrefs.jsonc` at session start and restores at teardown (plus on `atexit`). After a clean run, `git status userPrefs.jsonc` should be empty. If the wrapper's pre-flight printed a warning about a stale sidecar, call that out — means a prior session crashed.
|
||||
- `mcp-server/tests/report.html` and `junit.xml` are regenerated on every run; the HTML is self-contained (shareable).
|
||||
@@ -20,7 +20,7 @@ ENV PIP_ROOT_USER_ACTION=ignore
|
||||
RUN apt-get update && apt-get install --no-install-recommends -y \
|
||||
cmake git zip libgpiod-dev libbluetooth-dev libi2c-dev \
|
||||
libunistring-dev libmicrohttpd-dev libgnutls28-dev libgcrypt20-dev \
|
||||
libusb-1.0-0-dev libssl-dev pkg-config libsqlite3-dev libsdl2-dev && \
|
||||
libusb-1.0-0-dev libssl-dev pkg-config && \
|
||||
apt-get clean && rm -rf /var/lib/apt/lists/* && \
|
||||
pip install --no-cache-dir -U \
|
||||
platformio==6.1.16 \
|
||||
|
||||
@@ -51,7 +51,7 @@ for f in .clusterfuzzlite/*_fuzzer.cpp; do
|
||||
fuzzer=$(basename "$f" .cpp)
|
||||
cp -f "$f" src/fuzzer.cpp
|
||||
pio run -vvv --environment "$PIO_ENV"
|
||||
program="$PLATFORMIO_WORKSPACE_DIR/build/$PIO_ENV/meshtasticd"
|
||||
program="$PLATFORMIO_WORKSPACE_DIR/build/$PIO_ENV/program"
|
||||
cp "$program" "$OUT/$fuzzer"
|
||||
|
||||
# Copy shared libraries used by the fuzzer.
|
||||
|
||||
@@ -76,7 +76,7 @@ bool loopCanSleep()
|
||||
// Called just prior to starting Meshtastic. Allows for setting config values before startup.
|
||||
void lateInitVariant()
|
||||
{
|
||||
portduino_config.logoutputlevel = level_error;
|
||||
settingsMap[logoutputlevel] = level_error;
|
||||
channelFile.channels[0] = meshtastic_Channel{
|
||||
.has_settings = true,
|
||||
.settings =
|
||||
@@ -132,7 +132,7 @@ int portduino_main(int argc, char **argv); // Renamed "main" function from Mesht
|
||||
// Start Meshtastic in a thread and wait till it has reached the ON state.
|
||||
int LLVMFuzzerInitialize(int *argc, char ***argv)
|
||||
{
|
||||
portduino_config.maxtophone = 5;
|
||||
settingsMap[maxtophone] = 5;
|
||||
|
||||
meshtasticThread = std::thread([program = *argv[0]]() {
|
||||
char nodeIdStr[12];
|
||||
|
||||
@@ -1,10 +1,9 @@
|
||||
# trunk-ignore-all(terrascan/AC_DOCKER_0002): Known terrascan issue
|
||||
# trunk-ignore-all(hadolint/DL3008): Do not pin apt package versions
|
||||
# trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
|
||||
FROM mcr.microsoft.com/devcontainers/cpp:2-debian-13
|
||||
FROM mcr.microsoft.com/devcontainers/cpp:1-debian-12
|
||||
|
||||
USER root
|
||||
|
||||
# trunk-ignore(terrascan/AC_DOCKER_0002): Known terrascan issue
|
||||
# trunk-ignore(hadolint/DL3008): Use latest version of packages
|
||||
RUN apt-get update && export DEBIAN_FRONTEND=noninteractive \
|
||||
&& apt-get -y install --no-install-recommends \
|
||||
ca-certificates \
|
||||
@@ -28,15 +27,9 @@ RUN apt-get update && export DEBIAN_FRONTEND=noninteractive \
|
||||
hwdata \
|
||||
gpg \
|
||||
gnupg2 \
|
||||
libusb-1.0-0-dev \
|
||||
libuv1-dev \
|
||||
libi2c-dev \
|
||||
libxcb-xkb-dev \
|
||||
libxkbcommon-dev \
|
||||
libinput-dev \
|
||||
&& apt-get clean && rm -rf /var/lib/apt/lists/*
|
||||
|
||||
RUN pipx install platformio
|
||||
RUN pipx install platformio==6.1.15
|
||||
|
||||
COPY 99-platformio-udev.rules /etc/udev/rules.d/99-platformio-udev.rules
|
||||
|
||||
|
||||
@@ -8,21 +8,17 @@
|
||||
"features": {
|
||||
"ghcr.io/devcontainers/features/python:1": {
|
||||
"installTools": true,
|
||||
"version": "3.13"
|
||||
"version": "latest"
|
||||
}
|
||||
},
|
||||
"customizations": {
|
||||
"vscode": {
|
||||
"extensions": [
|
||||
"ms-vscode.cpptools",
|
||||
"Jason2866.esp-decoder",
|
||||
"pioarduino.pioarduino-ide",
|
||||
"platformio.platformio-ide",
|
||||
"Trunk.io"
|
||||
],
|
||||
"unwantedRecommendations": [
|
||||
"ms-azuretools.vscode-docker",
|
||||
"platformio.platformio-ide"
|
||||
],
|
||||
"unwantedRecommendations": ["ms-azuretools.vscode-docker"],
|
||||
"settings": {
|
||||
"extensions.ignoreRecommendations": true
|
||||
}
|
||||
|
||||
@@ -1,6 +1,3 @@
|
||||
#!/usr/bin/env sh
|
||||
|
||||
git submodule update --init
|
||||
|
||||
pip install --no-cache-dir setuptools
|
||||
pipx install esptool
|
||||
|
||||
+2
-3
@@ -1,5 +1,4 @@
|
||||
* text=auto eol=lf
|
||||
*.cmd text eol=crlf
|
||||
*.bat text eol=crlf
|
||||
*.ps1 text eol=crlf
|
||||
*.{cmd,[cC][mM][dD]} text eol=crlf
|
||||
*.{bat,[bB][aA][tT]} text eol=crlf
|
||||
*.{sh,[sS][hH]} text eol=lf
|
||||
|
||||
@@ -1,3 +0,0 @@
|
||||
# These are supported funding model platforms
|
||||
|
||||
open_collective: meshtastic
|
||||
@@ -1,7 +1,7 @@
|
||||
name: Bug Report
|
||||
description: File a bug report
|
||||
title: "[Bug]: "
|
||||
labels: [bug, triage]
|
||||
labels: ["bug", "triage"]
|
||||
body:
|
||||
- type: markdown
|
||||
attributes:
|
||||
@@ -72,15 +72,6 @@ body:
|
||||
validations:
|
||||
required: true
|
||||
|
||||
- type: checkboxes
|
||||
id: mui
|
||||
attributes:
|
||||
label: Is this bug report about any UI (https://meshtastic.org/docs/configuration/device-uis/) component firmware?
|
||||
options:
|
||||
- label: Meshtastic UI aka MUI
|
||||
- label: InkHUD
|
||||
- label: BaseUI
|
||||
|
||||
- type: input
|
||||
id: version
|
||||
attributes:
|
||||
|
||||
@@ -1,7 +1,7 @@
|
||||
name: New Board
|
||||
description: Request us to support new hardware
|
||||
title: "[Board]: "
|
||||
labels: [enhancement, triage]
|
||||
labels: ["enhancement", "triage"]
|
||||
body:
|
||||
- type: markdown
|
||||
attributes:
|
||||
|
||||
@@ -1,7 +1,7 @@
|
||||
name: Feature Request
|
||||
description: Request a new feature
|
||||
title: "[Feature Request]: "
|
||||
labels: [enhancement]
|
||||
labels: ["enhancement"]
|
||||
body:
|
||||
- type: markdown
|
||||
attributes:
|
||||
|
||||
@@ -1,6 +0,0 @@
|
||||
# Configuration related to self-hosted runner.
|
||||
self-hosted-runner:
|
||||
# Labels of self-hosted runner in array of strings.
|
||||
labels:
|
||||
- arctastic
|
||||
- test-runner
|
||||
@@ -27,14 +27,14 @@ inputs:
|
||||
description: A newline separated list of paths to store as artifacts
|
||||
required: false
|
||||
default: ""
|
||||
# include-web-ui:
|
||||
# description: Include the web UI in the build
|
||||
# required: false
|
||||
# default: "false"
|
||||
include-web-ui:
|
||||
description: Include the web UI in the build
|
||||
required: false
|
||||
default: "false"
|
||||
arch:
|
||||
description: Processor arch name
|
||||
required: true
|
||||
default: esp32
|
||||
default: "esp32"
|
||||
|
||||
runs:
|
||||
using: composite
|
||||
@@ -43,29 +43,22 @@ runs:
|
||||
id: base
|
||||
uses: ./.github/actions/setup-base
|
||||
|
||||
# - name: Get web ui version
|
||||
# if: inputs.include-web-ui == 'true'
|
||||
# id: webver
|
||||
# shell: bash
|
||||
# run: |
|
||||
# echo "ver=$(cat bin/web.version)" >> $GITHUB_OUTPUT
|
||||
- name: Pull web ui
|
||||
if: inputs.include-web-ui == 'true'
|
||||
uses: dsaltares/fetch-gh-release-asset@master
|
||||
with:
|
||||
repo: meshtastic/web
|
||||
file: build.tar
|
||||
target: build.tar
|
||||
token: ${{ inputs.github_token }}
|
||||
version: tags/v2.5.3
|
||||
|
||||
# - name: Pull web ui
|
||||
# if: inputs.include-web-ui == 'true'
|
||||
# uses: dsaltares/fetch-gh-release-asset@master
|
||||
# with:
|
||||
# repo: meshtastic/web
|
||||
# file: build.tar
|
||||
# target: build.tar
|
||||
# token: ${{ inputs.github_token }}
|
||||
# version: tags/v${{ steps.webver.outputs.ver }}
|
||||
|
||||
# - name: Unpack web ui
|
||||
# if: inputs.include-web-ui == 'true'
|
||||
# shell: bash
|
||||
# run: |
|
||||
# tar -xf build.tar -C data/static
|
||||
# rm build.tar
|
||||
- name: Unpack web ui
|
||||
if: inputs.include-web-ui == 'true'
|
||||
shell: bash
|
||||
run: |
|
||||
tar -xf build.tar -C data/static
|
||||
rm build.tar
|
||||
|
||||
- name: Remove debug flags for release
|
||||
shell: bash
|
||||
@@ -76,7 +69,7 @@ runs:
|
||||
done
|
||||
|
||||
- name: PlatformIO ${{ inputs.arch }} download cache
|
||||
uses: actions/cache@v5
|
||||
uses: actions/cache@v4
|
||||
with:
|
||||
path: ~/.platformio/.cache
|
||||
key: pio-cache-${{ inputs.arch }}-${{ hashFiles('.github/actions/**', '**.ini') }}
|
||||
@@ -100,9 +93,9 @@ runs:
|
||||
id: version
|
||||
|
||||
- name: Store binaries as an artifact
|
||||
uses: actions/upload-artifact@v7
|
||||
uses: actions/upload-artifact@v4
|
||||
with:
|
||||
name: firmware-${{ inputs.arch }}-${{ inputs.board }}-${{ steps.version.outputs.long }}
|
||||
name: firmware-${{ inputs.arch }}-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
|
||||
overwrite: true
|
||||
path: |
|
||||
${{ inputs.artifact-paths }}
|
||||
|
||||
@@ -1,13 +1,20 @@
|
||||
name: Setup Build Base Composite Action
|
||||
description: Base build actions for Meshtastic Platform IO steps
|
||||
name: "Setup Build Base Composite Action"
|
||||
description: "Base build actions for Meshtastic Platform IO steps"
|
||||
|
||||
runs:
|
||||
using: composite
|
||||
using: "composite"
|
||||
steps:
|
||||
- name: Checkout code
|
||||
uses: actions/checkout@v6
|
||||
uses: actions/checkout@v4
|
||||
with:
|
||||
submodules: recursive
|
||||
submodules: "recursive"
|
||||
ref: ${{github.event.pull_request.head.ref}}
|
||||
repository: ${{github.event.pull_request.head.repo.full_name}}
|
||||
|
||||
- name: Uncomment build epoch
|
||||
shell: bash
|
||||
run: |
|
||||
sed -i 's/#-DBUILD_EPOCH=$UNIX_TIME/-DBUILD_EPOCH=$UNIX_TIME/' platformio.ini
|
||||
|
||||
- name: Install dependencies
|
||||
shell: bash
|
||||
@@ -16,7 +23,7 @@ runs:
|
||||
sudo apt-get install -y cppcheck libbluetooth-dev libgpiod-dev libyaml-cpp-dev lsb-release
|
||||
|
||||
- name: Setup Python
|
||||
uses: actions/setup-python@v6
|
||||
uses: actions/setup-python@v5
|
||||
with:
|
||||
python-version: 3.x
|
||||
cache: pip
|
||||
|
||||
@@ -11,4 +11,4 @@ runs:
|
||||
- name: Install libs needed for native build
|
||||
shell: bash
|
||||
run: |
|
||||
sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev libusb-1.0-0-dev libi2c-dev libuv1-dev
|
||||
sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev libusb-1.0-0-dev libi2c-dev
|
||||
|
||||
@@ -1,801 +0,0 @@
|
||||
# Meshtastic Firmware - Copilot Instructions
|
||||
|
||||
This document provides context and guidelines for AI assistants working with the Meshtastic firmware codebase.
|
||||
|
||||
## Project Overview
|
||||
|
||||
Meshtastic is an open-source LoRa mesh networking project for long-range, low-power communication without relying on internet or cellular infrastructure. The firmware enables text messaging, location sharing, and telemetry over a decentralized mesh network. The project uses **C++17** as its language standard across all platforms.
|
||||
|
||||
### Supported Hardware Platforms
|
||||
|
||||
- **ESP32** (ESP32, ESP32-S3, ESP32-C3, ESP32-C6) - Most common platform
|
||||
- **nRF52** (nRF52840, nRF52833) - Low power Nordic chips
|
||||
- **RP2040/RP2350** - Raspberry Pi Pico variants
|
||||
- **STM32WL** - STM32 with integrated LoRa
|
||||
- **Linux/Portduino** - Native Linux builds (Raspberry Pi, etc.)
|
||||
- **macOS native** - Headless `meshtasticd` on Apple Silicon / x86_64; see `variants/native/portduino/platformio.ini` for Homebrew prereqs + CH341 LoRa setup
|
||||
|
||||
### Supported Radio Chips
|
||||
|
||||
- **SX1262/SX1268** - Sub-GHz LoRa (868/915 MHz regions)
|
||||
- **SX1280** - 2.4 GHz LoRa
|
||||
- **LR1110/LR1120/LR1121** - Wideband radios (sub-GHz and 2.4 GHz capable, but not simultaneously)
|
||||
- **RF95** - Legacy RFM95 modules
|
||||
- **LLCC68** - Low-cost LoRa
|
||||
|
||||
### MQTT Integration
|
||||
|
||||
MQTT provides a bridge between Meshtastic mesh networks and the internet, enabling nodes with network connectivity to share messages with remote meshes or external services.
|
||||
|
||||
#### Key Components
|
||||
|
||||
- **`src/mqtt/MQTT.cpp`** - Main MQTT client singleton, handles connection and message routing
|
||||
- **`src/mqtt/ServiceEnvelope.cpp`** - Protobuf wrapper for mesh packets sent over MQTT
|
||||
- **`moduleConfig.mqtt`** - MQTT module configuration
|
||||
|
||||
#### MQTT Topic Structure
|
||||
|
||||
Messages are published/subscribed using a hierarchical topic format:
|
||||
|
||||
```
|
||||
{root}/{channel_id}/{gateway_id}
|
||||
```
|
||||
|
||||
- `root` - Configurable prefix (default: `msh`)
|
||||
- `channel_id` - Channel name/identifier
|
||||
- `gateway_id` - Node ID of the publishing gateway
|
||||
|
||||
#### Configuration Defaults (from `Default.h`)
|
||||
|
||||
```cpp
|
||||
#define default_mqtt_address "mqtt.meshtastic.org"
|
||||
#define default_mqtt_username "meshdev"
|
||||
#define default_mqtt_password "large4cats"
|
||||
#define default_mqtt_root "msh"
|
||||
#define default_mqtt_encryption_enabled true
|
||||
#define default_mqtt_tls_enabled false
|
||||
```
|
||||
|
||||
#### Key Concepts
|
||||
|
||||
- **Uplink** - Mesh packets sent TO the MQTT broker (controlled by `uplink_enabled` per channel)
|
||||
- **Downlink** - MQTT messages received and injected INTO the mesh (controlled by `downlink_enabled` per channel)
|
||||
- **Encryption** - When `encryption_enabled` is true, only encrypted packets are sent; plaintext JSON is disabled
|
||||
- **ServiceEnvelope** - Protobuf wrapper containing packet + channel_id + gateway_id for routing
|
||||
- **JSON Support** - Optional JSON encoding for integration with external systems (disabled on nRF52 by default)
|
||||
|
||||
#### PKI Messages
|
||||
|
||||
PKI (Public Key Infrastructure) messages have special handling:
|
||||
|
||||
- Accepted on a special "PKI" channel
|
||||
- Allow encrypted DMs between nodes that discovered each other on downlink-enabled channels
|
||||
|
||||
## Encryption & Key Management
|
||||
|
||||
Meshtastic packets on the air are typically encrypted one of two ways: the **per-channel symmetric** layer (AES-CTR with a shared PSK) for broadcasts and channel traffic, and the **per-peer PKI** layer (X25519 ECDH → AES-256-CCM) for direct messages and remote admin. A channel with a 0-byte PSK (or Ham mode, which wipes PSKs) transmits cleartext — see the size table below. Both are implemented in `src/mesh/CryptoEngine.cpp`; the send/receive dispatch lives in `src/mesh/Router.cpp`; admin authorization lives in `src/modules/AdminModule.cpp`.
|
||||
|
||||
### High-level model
|
||||
|
||||
- **Channels** are symmetric rooms: anyone with the PSK can read any message on the channel. Channel 0 is the "primary" channel and ships with the short-form default PSK on factory devices, forming the public mesh most users join. (The LoRa modem preset `LONG_FAST` lives on `config.lora.modem_preset` and is an independent field — don't conflate "channel 0 default PSK" with the modem preset name.)
|
||||
- **DMs** addressed to a single node require PKI so that other holders of the channel PSK can't read them. Outside Ham mode, Meshtastic does not fall back to channel-symmetric encryption when the destination public key is unknown.
|
||||
- **Remote admin** is a DM carrying an `AdminMessage`. The receiver only acts on it if the sender's public key is on its allowlist (`config.security.admin_key[0..2]`).
|
||||
- **Ham mode** (`owner.is_licensed=true`, where `owner` is the local `meshtastic_User` record) disables PKI entirely and sends cleartext — FCC Part 97 prohibits encryption on amateur bands.
|
||||
- **No ratchet, no session.** Every packet is encrypted from scratch — a stateless design that matches the high-loss, store-and-forward nature of LoRa.
|
||||
|
||||
### Symmetric channel encryption (AES-CTR)
|
||||
|
||||
`CryptoEngine::encryptPacket` / `decrypt` / `encryptAESCtr` in `src/mesh/CryptoEngine.cpp`.
|
||||
|
||||
- **Cipher**: AES-CTR, AES-128 or AES-256 depending on key length. Same routine in both directions (CTR is a stream cipher, so encrypt == decrypt).
|
||||
- **Key**: `ChannelSettings.psk` bytes. Size semantics:
|
||||
- **0 bytes** → no encryption, cleartext on the air
|
||||
- **1 byte** → short-form index into the well-known `defaultpsk[]` in `src/mesh/Channels.h`. Index 0 = cleartext; 1 = defaultpsk unchanged; 2..255 = defaultpsk with its last byte incremented by (index − 1). This is what the CLI's `--ch-set psk default` produces.
|
||||
- **16 bytes** → raw AES-128 key
|
||||
- **32 bytes** → raw AES-256 key
|
||||
- **2..15 bytes** → zero-padded to 16 and used as AES-128 (with a warn log); **17..31 bytes** → zero-padded to 32 and used as AES-256 (with a warn log). Defensive fallback for malformed PSK input, not something to rely on.
|
||||
- **Nonce (128 bit)**: `packet_id` (u64 LE) ‖ `from_node` (u32 LE) ‖ `block_counter` (u32, starts at 0). Built in `CryptoEngine::initNonce`.
|
||||
- **No AEAD**: channel packets carry no MAC, so the channel-hash byte is not an integrity or authenticity check. `Channels::getHash` is a 1-byte XOR-derived hint over the channel name bytes and PSK bytes that helps receivers pick a candidate channel/PSK for decryption. Because it is only a small hint and collisions are easy to find, it should be described purely as a PSK-selection aid, not as a security filter an attacker cannot bypass.
|
||||
- **Channel 0 is special in one way only**: it's the channel the Router attempts PKI decryption on before falling through to AES-CTR. Non-zero channels always go straight to AES-CTR.
|
||||
|
||||
### PKI encryption for DMs (X25519 ECDH + AES-256-CCM)
|
||||
|
||||
`CryptoEngine::encryptCurve25519` / `decryptCurve25519` in `src/mesh/CryptoEngine.cpp`.
|
||||
|
||||
- **Keypair**: Curve25519 (aka X25519), 32-byte public + 32-byte private. Stored in `config.security.public_key` / `private_key`; the public half is mirrored into `owner.public_key` so it rides along in NodeInfo broadcasts and propagates through the mesh like any other identity field.
|
||||
- **Key generation** (`generateKeyPair`): stirs `HardwareRNG::fill()` (64 B from platform TRNG when available), the 16-byte `myNodeInfo.device_id`, and a call to `random()` into the rweather/Crypto library's software RNG, then `Curve25519::dh1`. `regeneratePublicKey` recomputes the public half from a known private (used when restoring from backup).
|
||||
- **Keygen entry points**: at boot, `NodeDB` calls `generateKeyPair` (or `regeneratePublicKey` when a stored private key is present and passes a low-entropy check) **directly** when `!owner.is_licensed` and `config.lora.region != UNSET`. `ensurePkiKeys` wraps the same logic for runtime/admin flows — it's the path `AdminModule::handleSetConfig` runs when first assigning a valid region or when security config is written; **do not assume it's the universal boot-time gate**, because the NodeDB path bypasses it.
|
||||
- **Handshake**: `Curve25519::dh2(local_private, remote_public) → 32-byte shared secret → SHA-256 → 32-byte AES-256 key`. Recomputed per packet. The SHA-256 step is effectively a KDF over the raw ECDH output.
|
||||
- **Cipher**: AES-256-CCM via `aes_ccm_ae` / `aes_ccm_ad` (`src/mesh/aes-ccm.cpp`). MAC length (the `M` parameter) is **8 bytes**. No AAD — the MAC covers ciphertext only.
|
||||
- **Nonce (13 bytes / 104 bit)**: `aes_ccm_ae`/`aes_ccm_ad` use a 13-byte CCM nonce (`L = 2` is hardcoded in `src/mesh/aes-ccm.cpp`), not a 16-byte nonce. For PKI packets, `CryptoEngine::initNonce(fromNode, packetNum, extraNonce)` starts from the usual packet-derived nonce material, then overwrites nonce bytes `4..7` with a fresh 32-bit `extraNonce = random()`. The effective nonce bytes are therefore: bytes `0..3` = `packet_id`, bytes `4..7` = transmitted `extraNonce`, bytes `8..11` = `from_node`, byte `12` = `0x00`. The receiver reconstructs the same 13-byte nonce from the packet metadata plus the appended `extraNonce`.
|
||||
- **Wire overhead**: 12 bytes appended to the ciphertext = 8-byte MAC ‖ 4-byte extraNonce. Defined as `MESHTASTIC_PKC_OVERHEAD = 12` in `src/mesh/RadioInterface.h`. Only the 4-byte `extraNonce` is sent; the rest of the 13-byte CCM nonce is reconstructed from packet fields as described above. The Router's send path checks this overhead against `MAX_LORA_PAYLOAD_LEN` before committing to PKI.
|
||||
- **Send selection** (`Router::send`): the sender enters the PKI path when **all** hold — we're the originator AND not Ham mode AND not Portduino simradio AND not on the `serial`/`gpio` channels (unless the packet is already marked `pki_encrypted`) AND `config.security.private_key.size == 32` AND destination is a single node (not broadcast) AND the portnum isn't infrastructure. `TRACEROUTE_APP`, `NODEINFO_APP`, `ROUTING_APP`, and `POSITION_APP` are routed through channel encryption even when DMed (these need to be readable by relaying peers). Once on the PKI path, if the destination's public key isn't in our NodeDB the send **fails** with `PKI_SEND_FAIL_PUBLIC_KEY` — it does not silently fall back to channel encryption. If the client explicitly set `pki_encrypted=true` and any condition blocks PKI, the send fails with `PKI_FAILED`.
|
||||
- **Receive selection** (`Router::perhapsDecode`): try PKI decrypt first when `channel == 0` AND `isToUs(p)` AND not broadcast AND both peers have public keys in NodeDB AND `rawSize > MESHTASTIC_PKC_OVERHEAD`. On success the packet gets `pki_encrypted=true` stamped and the sender's public key copied into `p->public_key` for downstream authorization.
|
||||
|
||||
### Remote admin authorization
|
||||
|
||||
Implemented in `src/modules/AdminModule.cpp` → `handleReceivedProtobuf`. The authorization check runs in this order:
|
||||
|
||||
1. **Response messages** — if `messageIsResponse(r)` is true (the payload is a response to one of our earlier admin requests), it's accepted without any further check. The in-file comment flags this as a known-untightened gap: a stricter implementation would remember which `public_key` we last queried and reject responses that don't match.
|
||||
2. **Local admin** — `mp.from == 0` (phone app over BLE, serial CLI, internal module); never travels over the air. **Rejected** if `config.security.is_managed` is true, because managed devices expect admin to arrive over the air through an authorized remote path.
|
||||
3. **Legacy admin channel (deprecated)** — the packet arrived on a channel named literally `"admin"`. Gated by `config.security.admin_channel_enabled`; returns `NOT_AUTHORIZED` if the flag is false. Kept for backward compatibility; new deployments should use PKI admin.
|
||||
4. **PKI admin (preferred for remote)** — `mp.pki_encrypted == true` AND `mp.public_key` matches one of `config.security.admin_key[0..2]` (up to three authorized 32-byte Curve25519 public keys, typically copied from the admin node's own `user.public_key`).
|
||||
5. **Fallthrough** → `NOT_AUTHORIZED`.
|
||||
|
||||
On top of authorization, any remote admin message that **mutates** state (not a request, not a response) also has to pass a session-key check (`checkPassKey`): the client must first pull a fresh 8-byte `session_passkey` via `get_admin_session_key_request`, then echo that passkey back in the mutating message. The device rotates the passkey after 150 s and rejects values older than 300 s — a narrow anti-replay window on top of the PKI layer.
|
||||
|
||||
`config.security.is_managed = true` disables **local** admin writes (`mp.from == 0` is rejected). It does not by itself force every admin action through PKI — the legacy `"admin"` channel still authorizes remote admin when `config.security.admin_channel_enabled == true`. The AdminModule refuses to persist `is_managed=true` unless at least one `admin_key` is populated — a deliberate guard against operators locking themselves out.
|
||||
|
||||
### Key-rotation hazards (actions that invalidate peers)
|
||||
|
||||
- **`factory_reset_device`** (the "full" variant, calls `NodeDB::factoryReset(eraseBleBonds=true)`) → **wipes** the X25519 private key; a fresh keypair is generated on the next region-set. Every existing peer holds the old public key, so DMs to this node silently fail PKI decrypt until every peer re-exchanges NodeInfo.
|
||||
- **`factory_reset_config`** (the "partial" variant, calls `NodeDB::factoryReset()` with `eraseBleBonds=false`) → **preserves** the X25519 private key in `installDefaultConfig(preserveKey=true)`; the public key is zeroed and gets rebuilt from the preserved private key on the next boot via the NodeDB path's `regeneratePublicKey` call. Identity is preserved and the mesh does not need to re-exchange keys.
|
||||
- **`region=UNSET → valid region`** → `ensurePkiKeys` runs inside the same `handleSetConfig` path; missing keys get generated at that moment.
|
||||
- **Ham mode transitions** — entering Ham mode (`user.is_licensed=true`) runs `Channels::ensureLicensedOperation`, which **wipes every channel PSK** (all traffic becomes cleartext) and disables the legacy admin channel. The X25519 private key is preserved on the device but not used because `Router::send` skips PKI when `owner.is_licensed` is true. Leaving Ham mode re-enables PKI with the preserved keypair but does not restore the wiped channel PSKs — the operator has to re-set them.
|
||||
- **Channel 0 PSK change** → every peer must re-learn the channel hash; cached NodeInfo becomes temporarily unreachable until the next broadcast.
|
||||
- **`security.private_key` blanked via admin** → regenerates both halves (unless in Ham mode) and propagates the new public key via NodeInfo.
|
||||
|
||||
## NodeDB Layout (v25)
|
||||
|
||||
`DEVICESTATE_CUR_VER = 25`, `DEVICESTATE_MIN_VER = 24`. The on-device NodeDB was split in v25 into a slim header table plus four optional satellite stores. Older v24 saves auto-migrate at boot. Old training-data instincts (`node->user.long_name`, `node->position.latitude_i`, `node->is_favorite`, `node->device_metrics.battery_level`) are wrong now — the fields aren't there. Read this section before touching anything that walks `nodeDB->meshNodes`.
|
||||
|
||||
### Slim `NodeInfoLite`
|
||||
|
||||
`UserLite` is flattened onto `NodeInfoLite` (no nested sub-message); `position` and `device_metrics` are removed entirely (tags reserved). MAC address is dropped. Long names are capped at 25 chars (`max_size:25` in `deviceonly.options`); `hw_model` and `role` are `int_size:8`. Encoded size dropped from ~166 B → ~105 B per node.
|
||||
|
||||
Booleans are bit-packed into `NodeInfoLite.bitfield`. **Do not read or write the bits directly** — use the inline helpers in `src/mesh/NodeDB.h`:
|
||||
|
||||
```cpp
|
||||
nodeInfoLiteHasUser(n) // bit 5 — user fields populated
|
||||
nodeInfoLiteIsFavorite(n) // bit 3
|
||||
nodeInfoLiteIsIgnored(n) // bit 4
|
||||
nodeInfoLiteIsMuted(n) // bit 1
|
||||
nodeInfoLiteIsLicensed(n) // bit 6 — Ham mode peer
|
||||
nodeInfoLiteIsKeyManuallyVerified(n) // bit 0
|
||||
nodeInfoLiteHasIsUnmessagable(n) // bit 8 — "is_unmessagable was sent"
|
||||
nodeInfoLiteIsUnmessagable(n) // bit 7
|
||||
// via_mqtt is bit 2 (mask exposed; predicate uses the mask directly)
|
||||
|
||||
nodeInfoLiteSetBit(n, NODEINFO_BITFIELD_IS_FAVORITE_MASK, true); // setter
|
||||
```
|
||||
|
||||
### Satellite stores
|
||||
|
||||
Four `std::unordered_map<NodeNum, …>` members on `NodeDB`, each gated by its own build flag:
|
||||
|
||||
| Map | Value type | Build flag |
|
||||
| ----------------- | ------------------------------- | ---------------------------------- |
|
||||
| `nodePositions` | `meshtastic_PositionLite` | `MESHTASTIC_EXCLUDE_POSITIONDB` |
|
||||
| `nodeTelemetry` | `meshtastic_DeviceMetrics` | `MESHTASTIC_EXCLUDE_TELEMETRYDB` |
|
||||
| `nodeEnvironment` | `meshtastic_EnvironmentMetrics` | `MESHTASTIC_EXCLUDE_ENVIRONMENTDB` |
|
||||
| `nodeStatus` | `meshtastic_StatusMessage` | `MESHTASTIC_EXCLUDE_STATUSDB` |
|
||||
|
||||
Defaults are ON (i.e., maps **excluded**) for STM32WL only — see `src/mesh/mesh-pb-constants.h`. On every other arch all four maps are present. When excluded, the map member is absent and the corresponding accessors return `false`.
|
||||
|
||||
All four maps are guarded by **`mutable concurrency::Lock satelliteMutex`** — concurrent access from receive threads, the phone API state machine, and the renderer is the rule, not the exception.
|
||||
|
||||
### Accessor convention
|
||||
|
||||
**Never hand out pointers into the maps.** Use the copy-out accessors on `NodeDB`:
|
||||
|
||||
```cpp
|
||||
bool copyNodePosition(NodeNum, meshtastic_PositionLite &out) const;
|
||||
bool copyNodeTelemetry(NodeNum, meshtastic_DeviceMetrics &out) const;
|
||||
bool copyNodeEnvironment(NodeNum, meshtastic_EnvironmentMetrics &out) const;
|
||||
bool copyNodeStatus(NodeNum, meshtastic_StatusMessage &out) const;
|
||||
```
|
||||
|
||||
Each takes the lock, copies the value if present, returns `false` if the entry is absent or the DB is excluded. Pass-by-out-param is deliberate — pointer-style accessors would invite UAF and lock-leak bugs across the renderer. The "has any X" convenience predicates (`hasValidPosition` etc.) are implemented in terms of these.
|
||||
|
||||
Writers go through `setNodeStatus`, `updatePosition`, `updateTelemetry` (which dispatches on `which_variant` for device vs environment metrics) — these own the lock and the eviction hooks.
|
||||
|
||||
### Eviction
|
||||
|
||||
Every code path that drops a node from the header table must also evict the satellites. The single chokepoint is `eraseNodeSatellites(NodeNum)`; it's already called from `getOrCreateMeshNode`'s oldest-boring eviction, `removeNodeByNum`, both branches of `resetNodes`, `cleanupMeshDB`, `addFromContact`'s ignored-branch, and `AdminModule`'s `set_ignored_node`. Add new eviction sites here, not by calling `.erase()` directly.
|
||||
|
||||
### Sync flow: thin NodeInfo + post-COMPLETE_ID replay (no opt-in)
|
||||
|
||||
There is no capability flag and no special "gradient" nonce. The **default** sync flow is:
|
||||
|
||||
1. Config / module-config / channel / metadata segments (same as before).
|
||||
2. `STATE_SEND_OWN_NODEINFO` — **our own** NodeInfo, still bundled with our position and device_metrics (because the replay snapshot excludes our own NodeNum). Emitted via `ConvertToNodeInfo(lite)`.
|
||||
3. `STATE_SEND_OTHER_NODEINFOS` — every other peer's NodeInfo, **always thin** (no `position`, no `device_metrics`). Emitted via `ConvertToNodeInfoThin(lite)`.
|
||||
4. `STATE_SEND_FILEMANIFEST` → `STATE_SEND_COMPLETE_ID` — the phone sees `config_complete_id` and treats sync as done.
|
||||
5. `STATE_SEND_PACKETS` — live mesh packets, with a trailing replay drain interleaved. The replay drain walks four cached satellite stores in order (positions → telemetry → environment → status) and emits each cached entry as an ordinary `MeshPacket` on the matching portnum (`POSITION_APP`, `TELEMETRY_APP` device + environment variants, `NODE_STATUS_APP`). These are indistinguishable on the wire from live mesh traffic, so clients need no special handling — any code that already updates UI on `POSITION_APP` etc. works.
|
||||
|
||||
`PhoneAPI::sendConfigComplete()` arms `replayPhase = REPLAY_PHASE_POSITIONS` for default/full sync and `SPECIAL_NONCE_ONLY_NODES`, while `SPECIAL_NONCE_ONLY_CONFIG` skips replay. The drain runs inside `STATE_SEND_PACKETS` via `popReplayPacket()`, lower priority than live traffic. When all four phases drain, `replayPhase` flips back to `REPLAY_PHASE_IDLE` and the snapshot vectors get `shrink_to_fit`ed.
|
||||
|
||||
STM32WL and any other build with all four `MESHTASTIC_EXCLUDE_*DB` flags set produces zero replay packets — `popReplayPacket` advances through each phase in microseconds without emitting anything.
|
||||
|
||||
Special nonces that still mean something:
|
||||
|
||||
- `SPECIAL_NONCE_ONLY_CONFIG` (69420) — skip node sync entirely, just config.
|
||||
- `SPECIAL_NONCE_ONLY_NODES` (69421) — skip config segments, jump straight to `STATE_SEND_OWN_NODEINFO`. Still gets the post-COMPLETE_ID replay drain.
|
||||
|
||||
There are no other reserved nonces; everything else is a fresh random `want_config_id` from the client.
|
||||
|
||||
### v24 → v25 migration
|
||||
|
||||
The legacy migration code lives in **`src/mesh/NodeDBLegacyMigration.cpp`**, not in `NodeDB.cpp`. It owns the `meshtastic_NodeDatabase_Legacy` callback and `NodeDB::migrateLegacyNodeDatabase()`. The legacy proto descriptor is `protobufs/meshtastic/deviceonly_legacy.proto` (only included by the migration TU). The boot path peeks the file's leading version tag, runs the migration if `version < 25`, then re-saves in v25 layout. The legacy descriptor is scheduled for removal once `DEVICESTATE_MIN_VER` is bumped.
|
||||
|
||||
### Read-site rules of thumb
|
||||
|
||||
- Never `node->position.X` / `node->device_metrics.X` — those fields no longer exist. Pull from the satellite map via `copyNodePosition` / `copyNodeTelemetry`.
|
||||
- Never `node->user.long_name` — `long_name`, `short_name`, `public_key`, `hw_model`, `role`, `macaddr` (gone), `is_licensed`, `is_unmessagable` are flat on `NodeInfoLite`.
|
||||
- Never `node->is_favorite` / `node->is_ignored` / `node->via_mqtt` / `node->is_key_manually_verified` — use the bitfield helpers.
|
||||
- Never assume `nodeDB->getMeshNode(num)->position.time` — call `copyNodePosition` and check the return.
|
||||
- Don't lock `satelliteMutex` yourself in renderer code; the copy-out accessors already do.
|
||||
|
||||
Unit tests for the conversion layer live in `test/test_type_conversions/test_main.cpp` (Unity) — bitfield round-trips, `long_name` truncation, thin-vs-full conversions. Add cases there when extending the schema.
|
||||
|
||||
## Project Structure
|
||||
|
||||
```
|
||||
firmware/
|
||||
├── src/ # Main source code
|
||||
│ ├── main.cpp # Application entry point
|
||||
│ ├── mesh/ # Core mesh networking
|
||||
│ │ ├── NodeDB.* # Node database management
|
||||
│ │ ├── Router.* # Packet routing
|
||||
│ │ ├── Channels.* # Channel management
|
||||
│ │ ├── CryptoEngine.* # AES-CTR (channels) + X25519 ECDH→AES-256-CCM (PKI for DMs/admin)
|
||||
│ │ ├── *Interface.* # Radio interface implementations
|
||||
│ │ ├── api/ # WiFi/Ethernet server APIs (ServerAPI, PacketAPI)
|
||||
│ │ ├── http/ # HTTP server (WebServer, ContentHandler)
|
||||
│ │ ├── wifi/ # WiFi support (WiFiAPClient)
|
||||
│ │ ├── eth/ # Ethernet support (ethClient)
|
||||
│ │ ├── udp/ # UDP multicast
|
||||
│ │ ├── compression/ # Message compression (unishox2)
|
||||
│ │ └── generated/ # Protobuf generated code
|
||||
│ ├── modules/ # Feature modules (Position, Telemetry, etc.)
|
||||
│ │ └── Telemetry/ # Telemetry subsystem
|
||||
│ │ └── Sensor/ # 50+ I2C sensor drivers
|
||||
│ ├── gps/ # GPS handling
|
||||
│ ├── graphics/ # Display drivers and UI
|
||||
│ │ └── niche/ # Specialized UIs (InkHUD e-ink framework)
|
||||
│ ├── platform/ # Platform-specific code (esp32, nrf52, rp2xx0, stm32wl, portduino)
|
||||
│ ├── input/ # Input device handling (InputBroker, keyboards, buttons)
|
||||
│ ├── detect/ # I2C hardware auto-detection (80+ device types)
|
||||
│ ├── motion/ # Accelerometer drivers (BMA423, BMI270, MPU6050, etc.)
|
||||
│ ├── mqtt/ # MQTT bridge client
|
||||
│ ├── power/ # Power HAL
|
||||
│ ├── nimble/ # BLE via NimBLE
|
||||
│ ├── buzz/ # Audio/notification (buzzer, RTTTL)
|
||||
│ ├── serialization/ # JSON serialization, COBS encoding
|
||||
│ ├── watchdog/ # Hardware watchdog thread
|
||||
│ ├── concurrency/ # Threading utilities (OSThread, Lock)
|
||||
│ ├── PowerFSM.* # Power finite state machine
|
||||
│ └── Observer.h # Observer/Observable event pattern
|
||||
├── variants/ # Hardware variant definitions
|
||||
│ ├── esp32/ # ESP32 variants
|
||||
│ ├── esp32s3/ # ESP32-S3 variants
|
||||
│ ├── esp32c3/ # ESP32-C3 variants
|
||||
│ ├── esp32c6/ # ESP32-C6 variants
|
||||
│ ├── nrf52840/ # nRF52 variants
|
||||
│ ├── rp2040/ # RP2040/RP2350 variants
|
||||
│ ├── stm32/ # STM32WL variants
|
||||
│ └── native/ # Linux/Portduino variants
|
||||
├── protobufs/ # Protocol buffer definitions
|
||||
├── boards/ # Custom PlatformIO board definitions
|
||||
├── test/ # Unit tests (12 test suites)
|
||||
└── bin/ # Build and utility scripts
|
||||
```
|
||||
|
||||
## Coding Conventions
|
||||
|
||||
### General Style
|
||||
|
||||
- Follow existing code style - run `trunk fmt` before commits
|
||||
- Prefer `LOG_DEBUG`, `LOG_INFO`, `LOG_WARN`, `LOG_ERROR` for logging
|
||||
- Use `assert()` for invariants that should never fail
|
||||
- C++17 features are available (`std::optional`, structured bindings, `if constexpr`, etc.)
|
||||
- **Keep code comments minimal — one or two lines, max.** Comment only when the _why_ isn't obvious from the code; never restate what the next line does. No multi-paragraph block comments explaining straightforward changes. The diff and commit message carry the rationale; the code carries the behavior.
|
||||
- **Use `Throttle` for time-based rate limiting, not raw `millis()` math.** `src/mesh/Throttle.h` provides `Throttle::isWithinTimespanMs(lastMs, intervalMs)` (returns true while inside the cooldown) and `Throttle::execute(&lastMs, intervalMs, func)` (function-pointer form that updates the timestamp on fire). Use these for any "did N ms pass since X" check — raw `millis() > lastMs + N` is rollover-unsafe (breaks after ~49.7 days) and inconsistent with the rest of the codebase. The helpers compute `now - lastMs` with unsigned subtraction, which wraps correctly.
|
||||
|
||||
### Naming Conventions
|
||||
|
||||
- Classes: `PascalCase` (e.g., `PositionModule`, `NodeDB`)
|
||||
- Functions/Methods: `camelCase` (e.g., `sendOurPosition`, `getNodeNum`)
|
||||
- Constants/Defines: `UPPER_SNAKE_CASE` (e.g., `MAX_INTERVAL`, `ONE_DAY`)
|
||||
- Member variables: `camelCase` (e.g., `lastGpsSend`, `nodeDB`)
|
||||
- Config defines: `USERPREFS_*` for user-configurable options
|
||||
|
||||
### Key Patterns
|
||||
|
||||
#### Module System
|
||||
|
||||
Modules use a three-tier class hierarchy:
|
||||
|
||||
1. **`MeshModule`** - Base class. Implement `wantPacket()` and `handleReceived()`. Returns `ProcessMessage::STOP` or `ProcessMessage::CONTINUE`.
|
||||
2. **`SinglePortModule`** - Handles a single portnum. Simplified `wantPacket()` that checks `decoded.portnum`.
|
||||
3. **`ProtobufModule<T>`** - Template for protobuf-based modules. Handles encoding/decoding automatically.
|
||||
|
||||
Most modules also inherit from **`OSThread`** for periodic tasks (the "mixin" pattern):
|
||||
|
||||
```cpp
|
||||
class MyModule : public ProtobufModule<meshtastic_MyMessage>, private concurrency::OSThread
|
||||
{
|
||||
public:
|
||||
MyModule();
|
||||
|
||||
protected:
|
||||
virtual bool handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshtastic_MyMessage *msg) override;
|
||||
virtual meshtastic_MeshPacket *allocReply() override; // Generate response packets
|
||||
virtual int32_t runOnce() override; // Periodic task (returns next interval in ms)
|
||||
virtual bool alterReceivedProtobuf(meshtastic_MeshPacket &mp, meshtastic_MyMessage *msg); // Modify in-flight
|
||||
virtual bool wantUIFrame(); // Request a UI display frame
|
||||
};
|
||||
```
|
||||
|
||||
Modules are registered in `src/modules/Modules.cpp` guarded by `MESHTASTIC_EXCLUDE_*` flags.
|
||||
|
||||
#### Observer/Observable Pattern
|
||||
|
||||
Event-driven communication between subsystems uses `src/Observer.h`:
|
||||
|
||||
```cpp
|
||||
// Observable emits events
|
||||
Observable<const meshtastic::Status *> newStatus;
|
||||
newStatus.notifyObservers(&status);
|
||||
|
||||
// Observer receives events via callback
|
||||
CallbackObserver<MyClass, const meshtastic::Status *> statusObserver =
|
||||
CallbackObserver<MyClass, const meshtastic::Status *>(this, &MyClass::handleStatusUpdate);
|
||||
```
|
||||
|
||||
#### Configuration Access
|
||||
|
||||
- `config.*` - Device configuration (LoRa, position, power, etc.)
|
||||
- `moduleConfig.*` - Module-specific configuration
|
||||
- `channels.*` - Channel configuration and management
|
||||
- `owner` - Device owner info
|
||||
- `myNodeInfo` - Local node info
|
||||
|
||||
#### Default Values
|
||||
|
||||
Use the `Default` class helpers in `src/mesh/Default.h`:
|
||||
|
||||
- `Default::getConfiguredOrDefaultMs(configured, default)` - Returns ms, using default if configured is 0
|
||||
- `Default::getConfiguredOrDefault(configured, default)` - Generic configured/default getter
|
||||
- `Default::getConfiguredOrMinimumValue(configured, min)` - Enforces minimum values
|
||||
- `Default::getConfiguredOrDefaultMsScaled(configured, default, numNodes)` - Scales based on network size
|
||||
|
||||
#### Thread Safety
|
||||
|
||||
- Use `concurrency::Lock` and `concurrency::LockGuard` for mutex protection
|
||||
- Radio SPI access uses `SPILock`
|
||||
- Prefer `OSThread` for background tasks
|
||||
|
||||
### Hardware Detection
|
||||
|
||||
`src/detect/ScanI2C` automatically enumerates 80+ I2C device types at boot including displays, sensors, RTCs, keyboards, PMUs, and touch controllers. This drives automatic initialization of the correct drivers.
|
||||
|
||||
### Graphics/UI System
|
||||
|
||||
Multiple display driver families in `src/graphics/`:
|
||||
|
||||
- **OLED**: SSD1306, SH1106, ST7567
|
||||
- **TFT**: TFTDisplay (LovyanGFX-based)
|
||||
- **E-Ink**: EInkDisplay2, EInkDynamicDisplay, EInkParallelDisplay
|
||||
|
||||
**InkHUD** (`src/graphics/niche/InkHUD/`) is an event-driven e-ink UI framework:
|
||||
|
||||
- Applet-based architecture — modular display tiles
|
||||
- Read-only, static display optimized for minimal refreshes and low power
|
||||
- Configured per-variant via `nicheGraphics.h`
|
||||
- Separate PlatformIO config: `src/graphics/niche/InkHUD/PlatformioConfig.ini`
|
||||
|
||||
### Input System
|
||||
|
||||
`src/input/InputBroker` is the centralized input event dispatcher. Supports multiple input sources: buttons, keyboards (BBQ10, Cardputer, TCA8418), touch screens, rotary encoders, and matrix keyboards.
|
||||
|
||||
### Power Management
|
||||
|
||||
`src/PowerFSM.*` implements a finite state machine with states: `stateON`, `statePOWER`, `stateSERIAL`, `stateDARK`. Key events: `EVENT_PRESS`, `EVENT_WAKE_TIMER`, `EVENT_LOW_BATTERY`, `EVENT_RECEIVED_MSG`, `EVENT_SHUTDOWN`. Conditionally excluded with `MESHTASTIC_EXCLUDE_POWER_FSM` (falls back to `FakeFsm`).
|
||||
|
||||
### Motion Sensors
|
||||
|
||||
`src/motion/AccelerometerThread` provides background motion monitoring with automatic screen wake and double-tap button press detection. Supports 10+ accelerometer/gyroscope chips (BMA423, BMI270, MPU6050, LIS3DH, LSM6DS3, STK8XXX, QMA6100P, ICM20948, BMX160).
|
||||
|
||||
### Telemetry Sensor Library
|
||||
|
||||
`src/modules/Telemetry/Sensor/` contains 50+ I2C sensor drivers organized by category:
|
||||
|
||||
- **Power monitoring**: INA219/226/260/3221, MAX17048
|
||||
- **Environmental**: BME280/680, SCD4X (CO₂), SEN5X (particulate)
|
||||
- **Humidity/Temperature**: SHT3X/4X, AHT10, MCP9808, MLX90614
|
||||
- **Light**: BH1750, TSL2561/2591, VEML7700, LTR390UV, OPT3001
|
||||
- **Air quality**: PMSA003I, SFA30
|
||||
- **Specialized**: CGRadSens (radiation), NAU7802 (weight scale)
|
||||
|
||||
### API/Networking
|
||||
|
||||
`src/mesh/api/` provides a template-based `ServerAPI` for client communication over WiFi (`WiFiServerAPI`) and Ethernet (`ethServerAPI`). Default port: **4403**. HTTP server in `src/mesh/http/`. JSON serialization in `src/serialization/MeshPacketSerializer`.
|
||||
|
||||
### Hardware Variants
|
||||
|
||||
Each hardware variant has:
|
||||
|
||||
- `variant.h` - Pin definitions and hardware capabilities
|
||||
- `platformio.ini` - Build configuration
|
||||
- Optional: `pins_arduino.h`, `rfswitch.h`, `nicheGraphics.h` (for InkHUD variants)
|
||||
|
||||
Key defines in variant.h:
|
||||
|
||||
```cpp
|
||||
#define USE_SX1262 // Radio chip selection
|
||||
#define HAS_GPS 1 // Hardware capabilities
|
||||
#define HAS_SCREEN 1 // Display present
|
||||
#define LORA_CS 36 // Pin assignments
|
||||
#define SX126X_DIO1 14 // Radio-specific pins
|
||||
```
|
||||
|
||||
### Protobuf Messages
|
||||
|
||||
- Defined in `protobufs/meshtastic/*.proto` (~32 proto files)
|
||||
- Generated code in `src/mesh/generated/meshtastic/`
|
||||
- Regenerate with `bin/regen-protos.sh`
|
||||
- Message types prefixed with `meshtastic_`
|
||||
- Nanopb `.options` files control field sizes and encoding
|
||||
|
||||
### Conditional Compilation
|
||||
|
||||
```cpp
|
||||
#if !MESHTASTIC_EXCLUDE_GPS // Feature exclusion
|
||||
#if !MESHTASTIC_EXCLUDE_WIFI // Network feature exclusion
|
||||
#if !MESHTASTIC_EXCLUDE_BLUETOOTH // BLE exclusion
|
||||
#if !MESHTASTIC_EXCLUDE_POWER_FSM // Power FSM exclusion
|
||||
#ifdef ARCH_ESP32 // Architecture-specific
|
||||
#ifdef ARCH_NRF52 // Nordic platform
|
||||
#ifdef ARCH_RP2040 // Raspberry Pi Pico
|
||||
#ifdef ARCH_PORTDUINO // Linux native
|
||||
#if defined(USE_SX1262) // Radio-specific
|
||||
#ifdef HAS_SCREEN // Hardware capability
|
||||
#if USERPREFS_EVENT_MODE // User preferences
|
||||
```
|
||||
|
||||
## Build System
|
||||
|
||||
## Agent Tooling Baseline
|
||||
|
||||
Mirror counterpart: `AGENTS.md` under **Agent Tooling Baseline**.
|
||||
|
||||
To reduce avoidable agent mistakes, assume these tools are available (or install them before significant repo work):
|
||||
|
||||
- **Required CLI basics**: `bash`, `git`, `find`, `grep`, `sed`, `awk`, `xargs`
|
||||
- **Strongly recommended**: `rg` (ripgrep) for fast file/text search, `jq` for JSON processing
|
||||
- **Build/test tools**: `python3`, `pip`, virtualenv (`python3 -m venv`), `platformio` (`pio`)
|
||||
- **Containerized native testing**: `docker` (fallback for non-Linux hosts; macOS can also build natively via `pio run -e native-macos`)
|
||||
|
||||
Fallback expectations for agents:
|
||||
|
||||
- If `rg` is unavailable, use `find` + `grep` instead of failing.
|
||||
- For native tests on hosts without Linux deps, prefer `./bin/test-native-docker.sh`.
|
||||
- The simulator helper script is `./bin/test-simulator.sh`.
|
||||
|
||||
Uses **PlatformIO** with custom scripts:
|
||||
|
||||
- `bin/platformio-pre.py` - Pre-build script
|
||||
- `bin/platformio-custom.py` - Custom build logic, manifest generation
|
||||
|
||||
Build commands:
|
||||
|
||||
```bash
|
||||
pio run -e tbeam # Build specific target
|
||||
pio run -e tbeam -t upload # Build and upload
|
||||
pio run -e native # Build native/Linux version
|
||||
pio run -e native-macos # Build headless macOS meshtasticd (Homebrew prereqs in variants/native/portduino/platformio.ini)
|
||||
```
|
||||
|
||||
### Build Manifest
|
||||
|
||||
`bin/platformio-custom.py` emits a build manifest with metadata:
|
||||
|
||||
- `hasMui`, `hasInkHud` - UI capability flags (overridable via `custom_meshtastic_has_mui`, `custom_meshtastic_has_ink_hud`)
|
||||
- Architecture normalization (e.g., `esp32s3` → `esp32-s3` for API compatibility)
|
||||
|
||||
## Common Tasks
|
||||
|
||||
### Adding a New Module
|
||||
|
||||
1. Create `src/modules/MyModule.cpp` and `.h`
|
||||
2. Inherit from appropriate base class (`MeshModule`, `SinglePortModule`, or `ProtobufModule<T>`)
|
||||
3. Mix in `concurrency::OSThread` if periodic work is needed
|
||||
4. Register in `src/modules/Modules.cpp` guarded by `#if !MESHTASTIC_EXCLUDE_MYMODULE`
|
||||
5. Add protobuf messages if needed in `protobufs/meshtastic/`
|
||||
6. Add test suite in `test/test_mymodule/` if applicable
|
||||
|
||||
### Adding a New Hardware Variant
|
||||
|
||||
1. Create directory under `variants/<arch>/<name>/`
|
||||
2. Add `variant.h` with pin definitions and hardware capability defines
|
||||
3. Add `platformio.ini` with build config — use `extends` to reference common base (e.g., `esp32s3_base`)
|
||||
4. Set `custom_meshtastic_support_level = 1` (PR builds) or `2` (merge builds)
|
||||
5. For e-ink displays, add `nicheGraphics.h` for InkHUD configuration
|
||||
|
||||
### Adding a New Telemetry Sensor
|
||||
|
||||
1. Create driver in `src/modules/Telemetry/Sensor/` following existing sensor pattern
|
||||
2. Register I2C address in `src/detect/ScanI2C` for auto-detection
|
||||
3. Integrate with the appropriate telemetry module (Environment, Health, Power, AirQuality)
|
||||
4. Add proto fields in `protobufs/meshtastic/telemetry.proto` if new data types are needed
|
||||
|
||||
### Modifying Configuration Defaults
|
||||
|
||||
- Check `src/mesh/Default.h` for default value defines
|
||||
- Check `src/mesh/NodeDB.cpp` for initialization logic
|
||||
- Consider `isDefaultChannel()` checks for public channel restrictions
|
||||
|
||||
## Important Considerations
|
||||
|
||||
### Traffic Management
|
||||
|
||||
The mesh network has limited bandwidth. When modifying broadcast intervals:
|
||||
|
||||
- Respect minimum intervals on default/public channels
|
||||
- Use `Default::getConfiguredOrMinimumValue()` to enforce minimums
|
||||
- Consider `numOnlineNodes` scaling for congestion control
|
||||
|
||||
### Power Management
|
||||
|
||||
Many devices are battery-powered:
|
||||
|
||||
- Use `IF_ROUTER(routerVal, normalVal)` for role-based defaults
|
||||
- Check `config.power.is_power_saving` for power-saving modes
|
||||
- Implement proper `sleep()` methods in radio interfaces
|
||||
|
||||
### Channel Security
|
||||
|
||||
- `channels.isDefaultChannel(index)` - Check if using default/public settings
|
||||
- Default channels get stricter rate limits to prevent abuse
|
||||
- Private channels may have relaxed limits
|
||||
|
||||
## GitHub Actions CI/CD
|
||||
|
||||
The project uses GitHub Actions extensively for CI/CD. Key workflows are in `.github/workflows/`:
|
||||
|
||||
### Core CI Workflows
|
||||
|
||||
- **`main_matrix.yml`** - Main CI pipeline, runs on push to `master`/`develop` and PRs
|
||||
- Uses `bin/generate_ci_matrix.py` to dynamically generate build targets
|
||||
- Builds all supported hardware variants
|
||||
- PRs build a subset (`--level pr`) for faster feedback
|
||||
|
||||
- **`trunk_check.yml`** - Code quality checks on PRs
|
||||
- Runs Trunk.io for linting and formatting
|
||||
- Must pass before merge
|
||||
|
||||
- **`tests.yml`** - End-to-end and hardware tests
|
||||
- Runs daily on schedule
|
||||
- Includes native tests and hardware-in-the-loop testing
|
||||
|
||||
- **`test_native.yml`** - Native platform unit tests
|
||||
- Runs `pio test -e native`
|
||||
|
||||
### Release Workflows
|
||||
|
||||
- **`release_channels.yml`** - Triggered on GitHub release publish
|
||||
- Builds Docker images
|
||||
- Packages for PPA (Ubuntu), OBS (openSUSE), and COPR (Fedora)
|
||||
- Handles Alpha/Beta/Stable release channels
|
||||
|
||||
- **`nightly.yml`** - Nightly builds from develop branch
|
||||
|
||||
- **`docker_build.yml`** / **`docker_manifest.yml`** - Docker image builds
|
||||
|
||||
### Build Matrix Generation
|
||||
|
||||
The CI uses `bin/generate_ci_matrix.py` to dynamically select which targets to build:
|
||||
|
||||
```bash
|
||||
# Generate full build matrix
|
||||
./bin/generate_ci_matrix.py all
|
||||
|
||||
# Generate PR-level matrix (subset for faster builds)
|
||||
./bin/generate_ci_matrix.py all --level pr
|
||||
```
|
||||
|
||||
Variants can specify their support level in `platformio.ini`:
|
||||
|
||||
- `custom_meshtastic_support_level = 1` - Actively supported, built on every PR
|
||||
- `custom_meshtastic_support_level = 2` - Supported, built on merge to main branches
|
||||
- `board_level = extra` - Extra builds, only on full releases
|
||||
|
||||
### Running Workflows Locally
|
||||
|
||||
Most workflows can be triggered manually via `workflow_dispatch` for testing.
|
||||
|
||||
## Testing
|
||||
|
||||
### Native unit tests (C++)
|
||||
|
||||
Unit tests in `test/` directory with 12 test suites:
|
||||
|
||||
- `test_crypto/` - Cryptography
|
||||
- `test_mqtt/` - MQTT integration
|
||||
- `test_radio/` - Radio interface
|
||||
- `test_mesh_module/` - Module framework
|
||||
- `test_meshpacket_serializer/` - Packet serialization
|
||||
- `test_transmit_history/` - Retransmission tracking
|
||||
- `test_atak/` - ATAK integration
|
||||
- `test_default/` - Default configuration
|
||||
- `test_http_content_handler/` - HTTP handling
|
||||
- `test_serial/` - Serial communication
|
||||
|
||||
Run with: `pio test -e native`
|
||||
|
||||
Simulation testing: `bin/test-simulator.sh`
|
||||
|
||||
Quick entry point for new test modules: `test/README.md` (native unit-test authoring guide, skeleton, pitfalls, and setup checklist).
|
||||
|
||||
### Hardware-in-the-loop tests (`mcp-server/tests/`)
|
||||
|
||||
Separate pytest suite that exercises real USB-connected Meshtastic devices. See the **MCP Server & Hardware Test Harness** section below for invocation, tier layout, and agent usage rules.
|
||||
|
||||
## MCP Server & Hardware Test Harness
|
||||
|
||||
The `mcp-server/` directory houses a firmware-aware [MCP](https://modelcontextprotocol.io/) server plus a pytest-based integration suite. AI agents that speak MCP get a well-defined tool surface for flashing, configuring, and inspecting physical Meshtastic devices — use it instead of hand-rolling `pio` or `meshtastic --port` calls where possible. `mcp-server/README.md` is the operator-facing setup doc; this section is the agent-facing usage contract.
|
||||
|
||||
The repo registers the server via `.mcp.json` at the repo root — Claude Code picks it up automatically once `mcp-server/.venv/` is built (`cd mcp-server && python3 -m venv .venv && .venv/bin/pip install -e '.[test]'`).
|
||||
|
||||
### When to use which surface
|
||||
|
||||
| Goal | Tool |
|
||||
| ------------------------------------------------- | ---------------------------------------------------------------------------------------------------------------- |
|
||||
| Find a connected device | `mcp__meshtastic__list_devices` |
|
||||
| Read a live node's config/state | `mcp__meshtastic__device_info`, `list_nodes`, `get_config` |
|
||||
| Mutate a device (owner, region, channels, reboot) | `set_owner`, `set_config`, `set_channel_url`, `reboot`, `shutdown`, `factory_reset` — all require `confirm=True` |
|
||||
| Flash firmware to a variant | `pio_flash` (any arch) or `erase_and_flash` (ESP32 factory install) |
|
||||
| Stream serial logs while debugging | `serial_open` → `serial_read` loop → `serial_close` |
|
||||
| Administer `userPrefs.jsonc` build-time constants | `userprefs_get`, `userprefs_set`, `userprefs_reset`, `userprefs_manifest` |
|
||||
| Run the regression suite | `./mcp-server/run-tests.sh` (or `/test` slash command) |
|
||||
| Diagnose a specific device | `/diagnose [role]` slash command (read-only) |
|
||||
| Triage a flaky test | `/repro <node-id> [count]` slash command |
|
||||
|
||||
**One MCP call per port at a time.** `SerialInterface` holds an exclusive OS-level lock on the serial port for its lifetime. If a `serial_*` session is open on `/dev/cu.usbmodem101`, calling `device_info` on the same port will fail fast pointing at the active session. Sequence calls: open → read/mutate → close, then next device. Never parallelize tool calls on the same port.
|
||||
|
||||
### MCP tool surface (43 tools)
|
||||
|
||||
Grouped by purpose. Full argument shapes in `mcp-server/README.md`; a few high-value signatures are called out here.
|
||||
|
||||
- **Discovery & metadata**: `list_devices`, `list_boards`, `get_board`
|
||||
- **Build & flash**: `build`, `clean`, `pio_flash`, `erase_and_flash` (ESP32 only), `update_flash` (ESP32 OTA), `touch_1200bps`
|
||||
- **Serial sessions** (long-running, 10k-line ring buffer): `serial_open`, `serial_read`, `serial_list`, `serial_close`
|
||||
- **Device reads**: `device_info`, `list_nodes`
|
||||
- **Device writes**: `set_owner`, `get_config`, `set_config`, `get_channel_url`, `set_channel_url`, `send_text`, `send_input_event` (inject a button/key press via the firmware's InputBroker), `set_debug_log_api`; destructive/power-state writes require `confirm=True`: `reboot`, `shutdown`, `factory_reset`
|
||||
- **userPrefs admin** (build-time constants, not runtime config): `userprefs_get`, `userprefs_set`, `userprefs_reset`, `userprefs_manifest`, `userprefs_testing_profile`
|
||||
- **Vendor escape hatches**: `esptool_chip_info`, `esptool_erase_flash`, `esptool_raw`, `nrfutil_dfu`, `nrfutil_raw`, `picotool_info`, `picotool_load`, `picotool_raw`
|
||||
- **USB power control** (via `uhubctl`, per-port PPPS toggle): `uhubctl_list` (read-only), `uhubctl_power(action='on'|'off', confirm=True)`, `uhubctl_cycle(delay_s, confirm=True)`. Target by raw `(location, port)` or by `role` (`"nrf52"`, `"esp32s3"`); role lookup checks `MESHTASTIC_UHUBCTL_LOCATION_<ROLE>` + `_PORT_<ROLE>` env vars first, falls back to VID auto-detection.
|
||||
- **Observability** (UI tier + operator ad-hoc): `capture_screen(role, ocr=True)` — grabs a USB-webcam frame of the device OLED and optionally OCRs it. Requires `mcp-server[ui]` extras (`opencv-python-headless`, `easyocr`) and `MESHTASTIC_UI_CAMERA_DEVICE_<ROLE>` env var; falls through to a 1×1 black PNG `NullBackend` when unconfigured.
|
||||
|
||||
`confirm=True` is a tool-level gate on top of whatever permission prompt your MCP host shows. **Don't bypass it** by asking the host to auto-approve — it exists specifically because MCP hosts sometimes remember "always allow this tool" and that's dangerous for `factory_reset`, `erase_and_flash`, `uhubctl_power(action='off')`, and `uhubctl_cycle`.
|
||||
|
||||
**TCP / native-host nodes.** Setting `MESHTASTIC_MCP_TCP_HOST=<host[:port]>` makes `list_devices` surface a `meshtasticd` daemon (e.g. the `native-macos` build) as a synthetic `tcp://host:port` entry, and `connect()` routes through `meshtastic.tcp_interface.TCPInterface` instead of `SerialInterface`. Every read/write/admin tool that flows through `connect()` works against the daemon transparently. USB-only tools (`pio_flash`, `erase_and_flash`, `update_flash`, `touch_1200bps`, `serial_open`, `esptool_*`, `nrfutil_*`, `picotool_*`) raise a clear `ConnectionError` when handed a `tcp://` port; `pio_flash` against a `native*` env raises a `FlashError` (no upload step — use `build` and run the binary directly). The pytest harness still assumes USB-attached devices per role; TCP-aware fixtures are deferred. See `mcp-server/README.md` § "TCP / native-host nodes".
|
||||
|
||||
### Hardware test suite (`mcp-server/run-tests.sh`)
|
||||
|
||||
The wrapper auto-detects connected devices (VID → role map: `0x239A` → `nrf52`, `0x303A`/`0x10C4` → `esp32s3`), maps each role to a PlatformIO env (`nrf52` → `rak4631`, `esp32s3` → `heltec-v3`, overridable via `MESHTASTIC_MCP_ENV_<ROLE>`), then invokes pytest. Zero pre-flight config needed from the operator.
|
||||
|
||||
Suite tiers (collected + run in this order via `pytest_collection_modifyitems`):
|
||||
|
||||
1. `tests/unit/` — pure Python (boards parse, pio wrapper, userPrefs parse, testing profile, uhubctl parser). No hardware.
|
||||
2. `tests/test_00_bake.py` — flashes each detected device with current `userPrefs.jsonc` merged with the session's test profile. Has its own skip-if-already-baked check comparing region + primary channel to the session profile; skips cheaply on warm devices.
|
||||
3. `tests/mesh/` — multi-device mesh: bidirectional send, broadcast delivery, direct-with-ACK, mesh formation within 60s. Parametrized `[nrf52->esp32s3]` and `[esp32s3->nrf52]`. Includes `test_peer_offline_recovery` which uses uhubctl to physically power off one peer mid-conversation (requires uhubctl; skips without).
|
||||
4. `tests/telemetry/` — `DEVICE_METRICS_APP` broadcast timing.
|
||||
5. `tests/monitor/` — boot-log panic check.
|
||||
6. `tests/recovery/` — `uhubctl` power-cycle round-trip + NVS persistence across hard reset. Requires `uhubctl` installed and a PPPS-capable hub; entire tier auto-skips otherwise.
|
||||
7. `tests/ui/` — input-broker-driven screen navigation with camera + OCR evidence.
|
||||
8. `tests/fleet/` — PSK seed session isolation.
|
||||
9. `tests/admin/` — channel URL roundtrip, owner persistence across reboot.
|
||||
10. `tests/provisioning/` — region + modem + slot bake, admin key presence, `UNSET` region blocks TX, userPrefs survive factory reset.
|
||||
|
||||
Invocation patterns:
|
||||
|
||||
```bash
|
||||
./mcp-server/run-tests.sh # full suite (auto-bake-if-needed)
|
||||
./mcp-server/run-tests.sh --force-bake # reflash before testing
|
||||
./mcp-server/run-tests.sh --assume-baked # skip bake (caller vouches for device state)
|
||||
./mcp-server/run-tests.sh tests/mesh # one tier
|
||||
./mcp-server/run-tests.sh tests/mesh/test_direct_with_ack.py # one file
|
||||
./mcp-server/run-tests.sh -k telemetry # name filter
|
||||
```
|
||||
|
||||
**No hardware detected?** The wrapper auto-narrows to `tests/unit/` only and prints `detected hub : (none)` in the pre-flight header. Agents interpreting the output should call this out explicitly — a 52-test green run without hardware is qualitatively different from a 12-unit-test green run.
|
||||
|
||||
**Artifacts every run produces:**
|
||||
|
||||
- `mcp-server/tests/report.html` — self-contained pytest-html. Each test gets a `Meshtastic debug` section with the tail of firmware log + device state dump. **Open this first** on failures; it's the canonical evidence source.
|
||||
- `mcp-server/tests/junit.xml` — CI-parseable.
|
||||
- `mcp-server/tests/reportlog.jsonl` — pytest-reportlog stream (`$report_type` keyed JSONL). Consumed by the live TUI.
|
||||
- `mcp-server/tests/fwlog.jsonl` — firmware log mirror from the `meshtastic.log.line` pubsub topic. Populated by the `_firmware_log_stream` autouse session fixture.
|
||||
|
||||
### Live TUI (`meshtastic-mcp-test-tui`)
|
||||
|
||||
A Textual-based live view that wraps `run-tests.sh`. Tails reportlog for per-test state, streams firmware logs, polls device state at startup + post-run (gated out of the active run because `hub_devices` holds exclusive port locks). Key bindings:
|
||||
|
||||
| Key | Action |
|
||||
| --- | ------------------------------------------------------------------------------------------------------------ |
|
||||
| `r` | re-run focused test (leaf → that node id; internal node → directory or `-k`) |
|
||||
| `f` | filter tree by substring |
|
||||
| `d` | failure detail modal (pulls `longrepr` + captured stdout from the reportlog) |
|
||||
| `g` | export reproducer bundle (tar.gz with README, test_report.json, time-filtered fwlog, devices.json, env.json) |
|
||||
| `l` | toggle firmware log pane |
|
||||
| `x` | tool coverage modal |
|
||||
| `c` | cross-run history sparkline |
|
||||
| `q` | quit (SIGINT → SIGTERM → SIGKILL escalation, 5-s windows each) |
|
||||
|
||||
Launch:
|
||||
|
||||
```bash
|
||||
cd mcp-server
|
||||
.venv/bin/meshtastic-mcp-test-tui # full suite
|
||||
.venv/bin/meshtastic-mcp-test-tui tests/mesh # args pass through to pytest
|
||||
```
|
||||
|
||||
The plain CLI stays primary; the TUI is for operators who want a live dashboard. Both consume the same `run-tests.sh`.
|
||||
|
||||
### Slash commands (Claude Code + Copilot)
|
||||
|
||||
Three AI-assisted workflows wrap the test harness. Claude Code operators get `/test`, `/diagnose`, `/repro`; Copilot operators get `/mcp-test`, `/mcp-diagnose`, `/mcp-repro`. Bodies:
|
||||
|
||||
- `.claude/commands/{test,diagnose,repro}.md`
|
||||
- `.github/prompts/mcp-{test,diagnose,repro}.prompt.md`
|
||||
|
||||
`.claude/commands/README.md` is the index.
|
||||
|
||||
House rules for agents running these prompts:
|
||||
|
||||
- **Interpret failures, don't just echo them.** Pull firmware log tails from `report.html` and classify each failure as transient / environmental / regression. Use the exact format in `.claude/commands/test.md`.
|
||||
- **No destructive writes without operator approval.** Any skill that could reflash, factory-reset, or reboot a device must describe the action and stop. The operator authorizes.
|
||||
- **Sequential MCP calls per port.** See above.
|
||||
- **"Unknown" is a valid classification.** If evidence doesn't support a root cause, say so and list what would disambiguate. Do not invent.
|
||||
|
||||
### Key fixtures (test authors + agents debugging)
|
||||
|
||||
`mcp-server/tests/conftest.py` provides:
|
||||
|
||||
- **`_session_userprefs`** (autouse session) — snapshots `userPrefs.jsonc` at session start, merges the session test profile via `userprefs.merge_active(test_profile)`, restores at teardown. Four layers of safety: pytest teardown + `atexit` + sidecar file (`userPrefs.jsonc.mcp-session-bak`) + startup self-heal in `run-tests.sh`. **Do not edit `userPrefs.jsonc` from inside a test.**
|
||||
- **`_firmware_log_stream`** (autouse session) — subscribes to `meshtastic.log.line` pubsub on every connected `SerialInterface` and mirrors lines to `tests/fwlog.jsonl`. Drives the TUI firmware-log pane.
|
||||
- **`_debug_log_buffer`** (autouse per-test) — captures last 200 firmware log lines + device state for attachment to the pytest-html `Meshtastic debug` section on failure.
|
||||
- **`hub_devices`** (session) — `dict[role, SerialInterface]` with session-long exclusive port locks. Reason the TUI's device poller is gated to startup + post-run only.
|
||||
- **`baked_mesh`** — parametrized mesh-pair fixture; depends on `test_00_bake`. `pytest_generate_tests` in `conftest.py` auto-generates `[nrf52->esp32s3]` and `[esp32s3->nrf52]` variants.
|
||||
- **`test_profile`** — session-scoped dict: region, primary channel, admin key, PSK seed. Derived from `MESHTASTIC_MCP_SEED` (defaults to `mcp-<user>-<host>`).
|
||||
|
||||
### Firmware integration points tied to the test harness
|
||||
|
||||
Two firmware changes exist specifically so the test harness works reliably. **Keep these in mind when touching related code.**
|
||||
|
||||
- **`src/mesh/StreamAPI.cpp` + `StreamAPI.h`** — `emitLogRecord` uses a dedicated `fromRadioScratchLog` + `txBufLog` pair and a `concurrency::Lock streamLock`. Before this fix, `debug_log_api_enabled=true` would tear `FromRadio` protobufs on the serial transport because `emitTxBuffer` and `emitLogRecord` shared a single scratch buffer. The conftest enables the log stream session-wide; without this fix the device would corrupt its own FromRadio replies mid-session.
|
||||
- **`src/mesh/PhoneAPI.cpp`** — `ToRadio` `Heartbeat(nonce=1)` triggers `nodeInfoModule->sendOurNodeInfo(NODENUM_BROADCAST, true, 0, true)` for serial clients, mirroring the pre-existing behavior for TCP/UDP clients in `PacketAPI.cpp`. The mesh tests rely on this to force a NodeInfo broadcast right after connect so the peer discovers them before the test's first assertion.
|
||||
|
||||
If you're modifying `StreamAPI`, `PhoneAPI`, `NodeInfoModule`, or `userPrefs` flow, run `./mcp-server/run-tests.sh` at minimum before asking for review.
|
||||
|
||||
### Recovery playbooks
|
||||
|
||||
| Symptom | First check | Fix |
|
||||
| --------------------------------------------------------------------------------- | ------------------------------------------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
|
||||
| `userPrefs.jsonc` dirty after test run | `git status --porcelain userPrefs.jsonc` | If non-empty, re-run `./mcp-server/run-tests.sh` once — the pre-flight self-heal restores from sidecar. If still dirty, `git checkout userPrefs.jsonc`. |
|
||||
| Port busy / wedged CP2102 on macOS | `lsof /dev/cu.usbserial-0001` | Kill the holder. USB replug if the kernel still reports busy. Often a stale `pio device monitor` or zombie `meshtastic_mcp` process. |
|
||||
| nRF52 appears unresponsive | `list_devices` shows VID `0x239A` but `device_info` times out | `touch_1200bps(port=...)` drops it into the DFU bootloader → `pio_flash` re-installs. |
|
||||
| Device fully wedged (Guru Meditation, frozen CDC, no DFU) | `list_devices` shows the VID but every admin call times out | `uhubctl_cycle(role="nrf52", confirm=True)` hard-power-cycles the port via USB hub PPPS. `baked_single`'s auto-recovery hook does this once automatically if uhubctl is installed. Falls back to physical replug if no PPPS hub. |
|
||||
| Multiple MCP server processes | `ps aux \| grep meshtastic_mcp` shows >1 | Kill all but the one your MCP host spawned. Zombies hold ports and break tests. |
|
||||
| Mesh formation fails, one side sees peer but other doesn't | `/diagnose` (or `list_nodes` on both sides) | Asymmetric NodeInfo. `test_direct_with_ack` has a heal path; `/repro` it a few times. If persistent, both devices' clocks may be out of sync with their NodeInfo cooldown. |
|
||||
| "role not present on hub" in skip reasons | `list_devices` | Expected if a device is unplugged. Reconnect before re-running the tier. |
|
||||
| Entire `tests/recovery/` tier skipped | `command -v uhubctl` | Expected if `uhubctl` isn't on PATH. Install via `brew install uhubctl` (macOS) or `apt install uhubctl` (Debian/Ubuntu). Also skips if no hub advertises PPPS. |
|
||||
| Entire `tests/ui/` tier skipped ("firmware not baked with USERPREFS_UI_TEST_LOG") | reportlog.jsonl for the skip reason | Re-run with `--force-bake` so the UI-log macro gets compiled into the fresh firmware. First run after the Round-3 landing always re-bakes. |
|
||||
| `tests/ui/` runs but captures are all 1×1 black PNGs | `MESHTASTIC_UI_CAMERA_DEVICE_ESP32S3` | Env var not set → `NullBackend`. Point a USB webcam at the heltec-v3 OLED and set the device index; `.venv/bin/python -c "import cv2; [print(i, cv2.VideoCapture(i).read()[0]) for i in range(5)]"` discovers it. |
|
||||
| Tests fail only on first attempt then pass on rerun | — | State leak from a prior session. Run with `--force-bake` to reset to a known state. |
|
||||
|
||||
### Never do these without asking
|
||||
|
||||
- `factory_reset` — wipes node identity; regenerates PKI keypair. Mesh peers will reject old DMs until re-exchange. Legitimate only when the operator explicitly wants it.
|
||||
- `erase_and_flash` — full chip erase; destroys all on-device state.
|
||||
- `esptool_erase_flash` / `esptool_raw` write/erase — bypasses pio's safety chain.
|
||||
- `set_config` on `lora.region` — changes regulatory domain; requires physical-location context the operator has and the agent doesn't.
|
||||
- `reboot` / `shutdown` mid-test — breaks fixture invariants.
|
||||
- `push -f`, `rebase -i`, `reset --hard`, or any history-rewriting git operation.
|
||||
- Clicking computer-use tools on web links in Mail/Messages/PDFs — open URLs via the claude-in-chrome MCP so the extension's link-safety checks apply.
|
||||
|
||||
## Resources
|
||||
|
||||
- [Documentation](https://meshtastic.org/docs/)
|
||||
@@ -0,0 +1,26 @@
|
||||
version: 2
|
||||
updates:
|
||||
- package-ecosystem: docker
|
||||
directory: devcontainer
|
||||
schedule:
|
||||
interval: daily
|
||||
time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
|
||||
timezone: US/Pacific
|
||||
- package-ecosystem: docker
|
||||
directory: /
|
||||
schedule:
|
||||
interval: daily
|
||||
time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
|
||||
timezone: US/Pacific
|
||||
- package-ecosystem: gitsubmodule
|
||||
directory: /
|
||||
schedule:
|
||||
interval: daily
|
||||
time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
|
||||
timezone: US/Pacific
|
||||
- package-ecosystem: github-actions
|
||||
directory: /.github/workflows
|
||||
schedule:
|
||||
interval: daily
|
||||
time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
|
||||
timezone: US/Pacific
|
||||
Binary file not shown.
|
Before Width: | Height: | Size: 89 KiB |
@@ -1,64 +0,0 @@
|
||||
---
|
||||
mode: agent
|
||||
description: Device health report via the meshtastic MCP tools (Copilot equivalent of the Claude Code /diagnose slash command)
|
||||
---
|
||||
|
||||
# `/mcp-diagnose` — device health report
|
||||
|
||||
Equivalent of `.claude/commands/diagnose.md`. Use when the operator asks to "check the devices", "what's the mesh looking like", "is nrf52 alive", etc.
|
||||
|
||||
This prompt assumes the meshtastic MCP server is registered with your VS Code Copilot agent. If it isn't, fall back to running `./mcp-server/run-tests.sh tests/unit` plus a short `device_info` script via the terminal.
|
||||
|
||||
## What to do
|
||||
|
||||
1. **Enumerate hardware** via the `list_devices` MCP tool (with `include_unknown=True`). For each entry where `likely_meshtastic=True`, capture `port`, `vid`, `pid`, `description`.
|
||||
|
||||
2. **Apply the operator's filter** (if any):
|
||||
- No filter → every likely-meshtastic device.
|
||||
- `nrf52` → `vid == 0x239a`
|
||||
- `esp32s3` → `vid == 0x303a` or `vid == 0x10c4`
|
||||
- A `/dev/cu.*` path → only that port.
|
||||
- Anything else → substring match on port.
|
||||
|
||||
3. **For each selected device, in sequence (don't parallelize — SerialInterface holds an exclusive port lock):**
|
||||
- `device_info(port=<p>)` → `my_node_num`, `long_name`, `short_name`, `firmware_version`, `hw_model`, `region`, `num_nodes`, `primary_channel`
|
||||
- `list_nodes(port=<p>)` → peer count, which peers have `publicKey`, SNR/RSSI distribution
|
||||
- `get_config(section="lora", port=<p>)` → region, preset, channel_num, tx_power, hop_limit
|
||||
- If anything looks off (can't connect, `num_nodes` wrong, missing `firmware_version`), open a short firmware-log window: `serial_open(port=<p>, env=<inferred>)`, wait 3 seconds, `serial_read(session_id, max_lines=100)`, `serial_close(session_id)`. Infer env from VID (0x239a → `rak4631`, 0x303a/0x10c4 → `heltec-v3`) unless an `MESHTASTIC_MCP_ENV_<ROLE>` env var overrides it.
|
||||
|
||||
4. **Hub health** (call once, not per-device): `uhubctl_list()` — enumerates every USB hub the host sees. Cross-reference each Meshtastic device's VID to find which hub + port it's on. Flag in the report if:
|
||||
- No hub advertises `ppps=true` → `tests/recovery/` can't run; hard-recovery via `uhubctl_cycle` isn't available.
|
||||
- A Meshtastic device is on a non-PPPS hub → note it; moving to a PPPS hub unlocks auto-recovery.
|
||||
- `uhubctl_list` raises `ConfigError: uhubctl not found` → report as "uhubctl not installed"; don't treat as a device fault.
|
||||
|
||||
5. **Render per-device report** as a compact block:
|
||||
|
||||
```text
|
||||
[nrf52 @ /dev/cu.usbmodem1101] fw=2.7.23.bce2825, hw=RAK4631
|
||||
owner : Meshtastic 40eb / 40eb
|
||||
region/band : US, channel 88, LONG_FAST
|
||||
tx_power : 30 dBm, hop_limit=3
|
||||
peers : 1 (esp32s3 0x433c2428, pubkey ✓, SNR 6.0 / RSSI -24 dBm)
|
||||
primary ch : McpTest
|
||||
hub : 1-1.3 port 2 (PPPS, uhubctl-controllable)
|
||||
firmware : no panics in last 3s
|
||||
```
|
||||
|
||||
Flag abnormalities inline with `⚠︎ <short reason>` — missing pubkey on a known peer, region UNSET, mismatched channel name, device on non-PPPS hub, etc.
|
||||
|
||||
6. **Cross-device correlation** (when >1 device selected):
|
||||
- Do both see each other in `nodesByNum`?
|
||||
- Do `region`, `channel_num`, `modem_preset` match across devices?
|
||||
- Do the primary channel names match? (Different name → different PSK → no decode.)
|
||||
|
||||
7. **Suggest next steps only for recognizable failure modes**, never speculatively:
|
||||
- Stale PKI one-way → "`/mcp-test tests/mesh/test_direct_with_ack.py` — the test's retry+nodeinfo-ping heals this."
|
||||
- Region mismatch → "re-bake one side via `./mcp-server/run-tests.sh --force-bake`."
|
||||
- Device unreachable, DFU reachable → `touch_1200bps(port=...)` + `pio_flash`. If not even DFU responds and the device is on a PPPS hub, escalate to `uhubctl_cycle(role=..., confirm=True)`.
|
||||
- CP2102-wedged-driver on macOS → see `run-tests.sh` notes.
|
||||
|
||||
## Hard constraints
|
||||
|
||||
- **Read-only.** No `set_config`, no `reboot`, no `factory_reset`, no `flash`. If the operator wants mutation, they'll escalate explicitly.
|
||||
- **Open/query/close per device.** Never hold multiple SerialInterfaces to the same port. The port lock is exclusive.
|
||||
- **Don't infer env beyond the VID map** — if the operator has an unusual board, ask them which env to use rather than guessing.
|
||||
@@ -1,68 +0,0 @@
|
||||
---
|
||||
mode: agent
|
||||
description: Re-run a specific test N times to triage flakes; diff firmware logs between passes and failures (Copilot equivalent of the Claude Code /repro slash command)
|
||||
---
|
||||
|
||||
# `/mcp-repro` — flakiness triage for one test
|
||||
|
||||
Equivalent of `.claude/commands/repro.md`. Use when the operator says "that one test is flaky — dig in", "repro the direct_with_ack failure", "why does X sometimes fail?".
|
||||
|
||||
## What to do
|
||||
|
||||
1. **Parse the operator's input** into two pieces:
|
||||
- **Test identifier** — either a pytest node id (has `::` or starts with `tests/`) or a `-k`-style filter (plain substring like `direct_with_ack`).
|
||||
- **Count** — integer, default `5`, cap at `20`. If the operator asks for 50, negotiate down and explain (airtime + USB wear).
|
||||
|
||||
2. **Sanity-check the hub** via the `list_devices` MCP tool. If the test name references `nrf52` or `esp32s3` and the matching VID isn't present, stop and report — re-running won't help.
|
||||
|
||||
3. **Loop** N times. Each iteration:
|
||||
|
||||
```bash
|
||||
./mcp-server/run-tests.sh <test-id> --tb=short -p no:cacheprovider
|
||||
```
|
||||
|
||||
`-p no:cacheprovider` keeps pytest from caching anything between iterations. Capture: exit code, duration, and (on failure) the `Meshtastic debug` firmware-log section from `mcp-server/tests/report.html`.
|
||||
|
||||
4. **Tally** results as you go:
|
||||
|
||||
```text
|
||||
attempt 1: PASS (42s)
|
||||
attempt 2: FAIL (128s) ← fw log captured
|
||||
attempt 3: PASS (39s)
|
||||
attempt 4: FAIL (121s)
|
||||
attempt 5: PASS (41s)
|
||||
--------------------------------------------------
|
||||
pass rate: 3/5 (60%) | mean duration: 74s
|
||||
```
|
||||
|
||||
5. **On mixed outcomes, diff the firmware logs** between one representative pass and one representative fail. Focus on:
|
||||
- Error-level lines present only in failures (`PKI_UNKNOWN_PUBKEY`, `Alloc an err=`, `Skip send`, `No suitable channel`, `NAK`)
|
||||
- Timing around the assertion point (broadcast sent? ACK received? retry fired?)
|
||||
- Device-state fields that changed between attempts
|
||||
|
||||
Surface the top 3 differences as a compact "passes when / fails when" table with uptime timestamps. Don't dump full logs.
|
||||
|
||||
6. **Classify** the flake into one of:
|
||||
- **LoRa airtime collision** — pass rate improves with fewer concurrent transmitters. Suggest a `time.sleep` gap or retry bump in the test body.
|
||||
- **PKI key staleness** — first attempt fails, subsequent ones pass; existing retry-loop pattern in `test_direct_with_ack.py` is the fix.
|
||||
- **NodeInfo cooldown** — `Skip send NodeInfo since we sent it <600s ago` in fail-only logs; needs a `broadcast_nodeinfo_ping()` warmup.
|
||||
- **Hardware-specific** — one direction consistently fails, firmware versions differ, CP2102 driver wedged, etc. For a device wedged past `touch_1200bps`, recommend `uhubctl_cycle(role=..., confirm=True)` to hard-power-cycle its hub port (requires `uhubctl` installed).
|
||||
- **Device went dark mid-run** — fails from some iteration onward and never recovers; firmware log stops arriving. Almost always a Guru crash with frozen CDC. Recommend `uhubctl_cycle` before the next iteration; escalate to replug if that also fails.
|
||||
- **Unknown** — say so. Don't invent a root cause.
|
||||
|
||||
7. **Report back** with:
|
||||
- Pass rate + mean duration.
|
||||
- Classification + the specific log evidence for it.
|
||||
- A concrete next step (tighter assertion, more retries, open `/mcp-diagnose`, file a bug, nothing).
|
||||
|
||||
## Examples
|
||||
|
||||
- `tests/mesh/test_direct_with_ack.py::test_direct_with_ack_roundtrip[esp32s3->nrf52] 10` — 10 runs of that parametrized case.
|
||||
- `broadcast_delivers` — no `::`, no `tests/`; treat as `-k broadcast_delivers`; runs every match 5 times.
|
||||
- `tests/telemetry/test_device_telemetry_broadcast.py 3` — shorter count for a slow test.
|
||||
|
||||
## Notes
|
||||
|
||||
- If the FIRST attempt fails and the rest pass, that's a state-leak signature — suggest starting from `--force-bake` or a clean device state rather than chasing the first-failure firmware logs.
|
||||
- If ALL N fail, this isn't a flake — it's a regression. Say so, stop iterating, escalate to `/mcp-test` for full-suite context.
|
||||
- Don't rebuild firmware during triage. Flakes that only reproduce under different firmware belong in a separate session with a plan.
|
||||
@@ -1,57 +0,0 @@
|
||||
---
|
||||
mode: agent
|
||||
description: Run the mcp-server test suite and interpret results (Copilot equivalent of the Claude Code /test slash command)
|
||||
---
|
||||
|
||||
# `/mcp-test` — mcp-server test runner with interpretation
|
||||
|
||||
Equivalent of the Claude Code `/test` slash command in `.claude/commands/test.md`. Use this when the operator asks you to "run the tests", "check the mcp test suite", "run the mesh tests", etc.
|
||||
|
||||
## What to do
|
||||
|
||||
1. **Invoke the wrapper** from the firmware repo root:
|
||||
|
||||
```bash
|
||||
./mcp-server/run-tests.sh [pytest-args]
|
||||
```
|
||||
|
||||
If the operator specified a subset (e.g. "just the mesh tests"), pass it through as `tests/mesh` or a pytest `-k filter`. If they said nothing, use the wrapper's defaults (full suite with pytest-html report).
|
||||
|
||||
The wrapper auto-detects connected Meshtastic devices, maps each to its PlatformIO env, exports the required env vars, and invokes pytest. Zero pre-flight config needed from the operator.
|
||||
|
||||
2. **Read the pre-flight header** (first few lines of wrapper output). The `detected hub :` line lists role → port → env mappings. If it reads `(none)`, the wrapper narrowed to `tests/unit` only — call that out explicitly so the operator knows hardware tiers were skipped.
|
||||
|
||||
3. **On pass**: one-line summary like `N passed, M skipped in <duration>`. Don't enumerate test names. DO mention any non-placeholder SKIPs and name the cause:
|
||||
- `"role not present on hub"` → device unplugged; operator should reconnect.
|
||||
- `"firmware not baked with USERPREFS_UI_TEST_LOG"` → tests/ui skipped; the UI-log compile macro isn't in the baked firmware. Suggest `--force-bake`.
|
||||
- `"uhubctl not installed"` → tests/recovery + `test_peer_offline_recovery` skipped. Suggest `brew install uhubctl` / `apt install uhubctl`.
|
||||
- `"no PPPS-capable hubs detected"` → tests/recovery skipped because the attached hub doesn't support per-port power switching; won't run on that setup.
|
||||
- `"opencv-python-headless is not installed"` → tests/ui auto-deselected by `run-tests.sh`. Suggest `pip install -e 'mcp-server/.[ui]'`.
|
||||
|
||||
4. **On failure**: open `mcp-server/tests/report.html` (pytest-html output, self-contained) and extract the `Meshtastic debug` section for each failed test. That section includes a firmware log stream (last 200 lines) and device state dump. For each failure, summarise:
|
||||
- test name
|
||||
- one-line assertion message
|
||||
- the specific firmware log lines that explain why (look for `PKI_UNKNOWN_PUBKEY`, `Skip send NodeInfo`, `Error=`, `Guru Meditation`, `assertion failed`, `No suitable channel`)
|
||||
- for UI-tier failures also check `mcp-server/tests/ui_captures/<session>/<test>/transcript.md` (per-step frame + OCR)
|
||||
|
||||
5. **Classify each failure** as one of:
|
||||
- **Transient flake** — LoRa collision, first-attempt NAK with self-heal pattern, timing-sensitive assertion. Suggest `/mcp-repro <test-id>` to confirm.
|
||||
- **Environmental** — device unreachable, port busy, CP2102 driver wedged on macOS. Suggest recovery in escalation order: (a) replug USB, (b) `touch_1200bps` + `pio_flash` for nRF52 DFU, (c) `uhubctl_cycle(role=..., confirm=True)` for a device wedged past DFU (needs `uhubctl` installed; `baked_single` does this once automatically when available). Also check `git status userPrefs.jsonc`.
|
||||
- **Regression** — same assertion fails repeatedly on re-runs, firmware log shows novel errors. Identify the firmware module likely responsible.
|
||||
|
||||
6. **Do NOT run destructive recovery automatically**. If a failure looks like it needs a reflash, factory*reset, `uhubctl_cycle`, or replug — \_describe the steps* and let the operator decide. Never burn airtime or flash cycles without approval.
|
||||
|
||||
## Arguments convention
|
||||
|
||||
Operators generally invoke this prompt either with no arguments (full suite) or with a specific subset. Examples:
|
||||
|
||||
- `tests/mesh` — one tier
|
||||
- `tests/mesh/test_direct_with_ack.py::test_direct_with_ack_roundtrip` — one test
|
||||
- `--force-bake` — reflash devices first
|
||||
- `-k telemetry` — name-filter
|
||||
|
||||
## Side-effects to confirm in your summary
|
||||
|
||||
- `userPrefs.jsonc` should be clean after a successful run. The session fixture in `mcp-server/tests/conftest.py` (`_session_userprefs`) snapshots and restores. Check `git status --porcelain userPrefs.jsonc` and report if it's non-empty.
|
||||
- `mcp-server/tests/report.html` and `junit.xml` regenerate on every run.
|
||||
- The wrapper prints a warning if a `.mcp-session-bak` sidecar was left over from a crashed prior session and auto-restores from it — mention that if it happened.
|
||||
@@ -1,138 +0,0 @@
|
||||
# New Meshtastic Module
|
||||
|
||||
Guide for developing a new Meshtastic firmware module.
|
||||
|
||||
## Module Hierarchy
|
||||
|
||||
Choose the appropriate base class:
|
||||
|
||||
1. **`MeshModule`** — Raw base class. Override `wantPacket()` and `handleReceived()`. Returns `ProcessMessage::STOP` or `ProcessMessage::CONTINUE`.
|
||||
2. **`SinglePortModule`** — Handles a single `meshtastic_PortNum`. Constructor takes `(name, portNum)`. Simplified `wantPacket()` checking `decoded.portnum`. Use `allocDataPacket()` to create outgoing packets.
|
||||
3. **`ProtobufModule<T>`** — Template for protobuf-encoded modules. Constructor takes `(name, portNum, fields)`. Override `handleReceivedProtobuf()`. Use `allocDataProtobuf(payload)` to create outgoing packets.
|
||||
|
||||
Most modules also mix in `concurrency::OSThread` for periodic background tasks.
|
||||
|
||||
## Implementation Pattern
|
||||
|
||||
```cpp
|
||||
// src/modules/MyModule.h
|
||||
#pragma once
|
||||
#include "ProtobufModule.h"
|
||||
#include "concurrency/OSThread.h"
|
||||
|
||||
class MyModule : public ProtobufModule<meshtastic_MyMessage>, private concurrency::OSThread
|
||||
{
|
||||
public:
|
||||
MyModule();
|
||||
|
||||
protected:
|
||||
// Process incoming protobuf packet. Return true to stop further processing.
|
||||
virtual bool handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshtastic_MyMessage *msg) override;
|
||||
|
||||
// Generate response packet (optional)
|
||||
virtual meshtastic_MeshPacket *allocReply() override;
|
||||
|
||||
// Periodic task — return next run interval in ms, or disable()
|
||||
virtual int32_t runOnce() override;
|
||||
|
||||
// Modify packet in-flight before delivery (optional)
|
||||
virtual bool alterReceivedProtobuf(meshtastic_MeshPacket &mp, meshtastic_MyMessage *msg);
|
||||
|
||||
// Request a UI display frame (optional)
|
||||
virtual bool wantUIFrame();
|
||||
};
|
||||
```
|
||||
|
||||
## Registration
|
||||
|
||||
Register in `src/modules/Modules.cpp` inside `setupModules()`:
|
||||
|
||||
```cpp
|
||||
#if !MESHTASTIC_EXCLUDE_MYMODULE
|
||||
new MyModule();
|
||||
#endif
|
||||
```
|
||||
|
||||
If other code needs to reference the module instance:
|
||||
|
||||
```cpp
|
||||
#if !MESHTASTIC_EXCLUDE_MYMODULE
|
||||
myModule = new MyModule();
|
||||
#endif
|
||||
```
|
||||
|
||||
And declare the global in the header:
|
||||
|
||||
```cpp
|
||||
extern MyModule *myModule;
|
||||
```
|
||||
|
||||
Some modules also conditionally instantiate based on `moduleConfig`:
|
||||
|
||||
```cpp
|
||||
#if !MESHTASTIC_EXCLUDE_MYMODULE
|
||||
if (moduleConfig.has_my_module && moduleConfig.my_module.enabled) {
|
||||
new MyModule();
|
||||
}
|
||||
#endif
|
||||
```
|
||||
|
||||
## Conditional Compilation
|
||||
|
||||
Add a `MESHTASTIC_EXCLUDE_MYMODULE` guard. This allows the module to be excluded from constrained builds. The flag name must follow the pattern: `MESHTASTIC_EXCLUDE_` + uppercase module name.
|
||||
|
||||
## Protobuf Messages (if needed)
|
||||
|
||||
1. Define messages in `protobufs/meshtastic/` (e.g., `mymodule.proto`)
|
||||
2. Add a `.options` file for nanopb field size constraints
|
||||
3. Regenerate with `bin/regen-protos.sh`
|
||||
4. Generated code appears in `src/mesh/generated/meshtastic/`
|
||||
5. Assign a `meshtastic_PortNum` if the module uses a new port number
|
||||
|
||||
## Timing and Defaults
|
||||
|
||||
Use `Default` class helpers for configurable intervals:
|
||||
|
||||
```cpp
|
||||
int32_t MyModule::runOnce()
|
||||
{
|
||||
uint32_t interval = Default::getConfiguredOrDefaultMs(moduleConfig.my_module.update_interval,
|
||||
default_my_module_interval);
|
||||
// ... do work ...
|
||||
return interval;
|
||||
}
|
||||
```
|
||||
|
||||
On public/default channels, enforce minimums with `Default::getConfiguredOrMinimumValue()`.
|
||||
|
||||
## Observer Pattern
|
||||
|
||||
Subscribe to system events:
|
||||
|
||||
```cpp
|
||||
CallbackObserver<MyModule, const meshtastic::Status *> statusObserver =
|
||||
CallbackObserver<MyModule, const meshtastic::Status *>(this, &MyModule::handleStatusUpdate);
|
||||
```
|
||||
|
||||
## Testing
|
||||
|
||||
Add test suite in `test/test_mymodule/`:
|
||||
|
||||
```text
|
||||
test/
|
||||
└── test_mymodule/
|
||||
└── test_main.cpp
|
||||
```
|
||||
|
||||
Run with: `pio test -e native`
|
||||
|
||||
## Checklist
|
||||
|
||||
- [ ] Header and implementation files in `src/modules/`
|
||||
- [ ] Inherit from appropriate base class (MeshModule / SinglePortModule / ProtobufModule)
|
||||
- [ ] Mix in OSThread if periodic work is needed
|
||||
- [ ] Register in `src/modules/Modules.cpp` with `MESHTASTIC_EXCLUDE_` guard
|
||||
- [ ] Add protobuf definitions if needed (`protobufs/meshtastic/`)
|
||||
- [ ] Use `Default::getConfiguredOrDefaultMs()` for timing
|
||||
- [ ] Respect bandwidth limits on public channels
|
||||
- [ ] Add test suite in `test/`
|
||||
@@ -1,149 +0,0 @@
|
||||
# New Telemetry Sensor
|
||||
|
||||
Guide for adding a new I2C telemetry sensor driver to Meshtastic firmware.
|
||||
|
||||
## Overview
|
||||
|
||||
Telemetry sensors live in `src/modules/Telemetry/Sensor/`. There are 50+ existing drivers organized by measurement type. Each sensor integrates with one of the telemetry modules:
|
||||
|
||||
- **EnvironmentTelemetryModule** — Temperature, humidity, pressure, gas, light
|
||||
- **AirQualityTelemetryModule** — Particulate matter, VOCs
|
||||
- **PowerTelemetryModule** — Voltage, current, power monitoring
|
||||
- **HealthTelemetryModule** — Heart rate, SpO2, body temperature
|
||||
|
||||
## Sensor Driver Pattern
|
||||
|
||||
Each sensor has a `.h` and `.cpp` file pair following this pattern:
|
||||
|
||||
```cpp
|
||||
// src/modules/Telemetry/Sensor/MySensor.h
|
||||
#pragma once
|
||||
#include "TelemetrySensor.h"
|
||||
#include <MySensorLibrary.h> // Arduino/PlatformIO library
|
||||
|
||||
class MySensor : virtual public TelemetrySensor
|
||||
{
|
||||
private:
|
||||
MySensorLibrary sensor;
|
||||
|
||||
public:
|
||||
MySensor() : TelemetrySensor(meshtastic_TelemetrySensorType_MY_SENSOR, "MySensor") {}
|
||||
|
||||
// Initialize sensor hardware. Return true on success.
|
||||
virtual void setup() override;
|
||||
|
||||
// Read sensor data into the telemetry protobuf. Return true on success.
|
||||
virtual bool getMetrics(meshtastic_Telemetry *measurement) override;
|
||||
};
|
||||
```
|
||||
|
||||
```cpp
|
||||
// src/modules/Telemetry/Sensor/MySensor.cpp
|
||||
#include "MySensor.h"
|
||||
#include "TelemetrySensor.h"
|
||||
|
||||
void MySensor::setup()
|
||||
{
|
||||
sensor.begin();
|
||||
// Configure sensor parameters...
|
||||
}
|
||||
|
||||
bool MySensor::getMetrics(meshtastic_Telemetry *measurement)
|
||||
{
|
||||
// Read from hardware
|
||||
float value = sensor.readValue();
|
||||
|
||||
// Populate the appropriate protobuf variant
|
||||
measurement->variant.environment_metrics.temperature = value;
|
||||
// ... other fields ...
|
||||
|
||||
return true;
|
||||
}
|
||||
```
|
||||
|
||||
## I2C Address Registration
|
||||
|
||||
Register the sensor's I2C address(es) in `src/detect/ScanI2C` so it's auto-detected at boot:
|
||||
|
||||
1. Add a `DeviceType` enum entry in `src/detect/ScanI2C.h`
|
||||
2. Add the I2C address mapping in `src/detect/ScanI2CTwoWire.cpp`
|
||||
|
||||
The scan runs at boot and populates a device map that telemetry modules use to decide which sensors to initialize.
|
||||
|
||||
## Protobuf Fields
|
||||
|
||||
If the sensor provides data not covered by existing telemetry fields:
|
||||
|
||||
1. Add fields to the appropriate message in `protobufs/meshtastic/telemetry.proto`:
|
||||
- `EnvironmentMetrics` — Environmental measurements
|
||||
- `AirQualityMetrics` — Air quality data
|
||||
- `PowerMetrics` — Power/energy data
|
||||
- `HealthMetrics` — Health/biometric data
|
||||
2. Add a `.options` constraint if needed (field sizes for nanopb)
|
||||
3. Regenerate: `bin/regen-protos.sh`
|
||||
|
||||
## Sensor Type Enum
|
||||
|
||||
Add the sensor to `meshtastic_TelemetrySensorType` enum in `protobufs/meshtastic/telemetry.proto`:
|
||||
|
||||
```protobuf
|
||||
enum TelemetrySensorType {
|
||||
// ... existing entries ...
|
||||
MY_SENSOR = XX;
|
||||
}
|
||||
```
|
||||
|
||||
## Integration with Telemetry Module
|
||||
|
||||
Wire the sensor into the appropriate telemetry module. For environment sensors, this is typically in `src/modules/Telemetry/EnvironmentTelemetry.cpp`:
|
||||
|
||||
1. Include the sensor header
|
||||
2. Add initialization in `setupSensor()` guarded by detection results
|
||||
3. Call `getMetrics()` in the measurement collection path
|
||||
|
||||
Example pattern from existing sensors:
|
||||
|
||||
```cpp
|
||||
#include "Sensor/MySensor.h"
|
||||
|
||||
MySensor mySensor;
|
||||
|
||||
// In setup:
|
||||
if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_MY_SENSOR].first > 0) {
|
||||
mySensor.setup();
|
||||
}
|
||||
|
||||
// In measurement collection:
|
||||
if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_MY_SENSOR].first > 0) {
|
||||
mySensor.getMetrics(&measurement);
|
||||
}
|
||||
```
|
||||
|
||||
## Library Dependencies
|
||||
|
||||
If the sensor needs an external library, add it to the `lib_deps` in the relevant base platformio.ini configs:
|
||||
|
||||
```ini
|
||||
lib_deps =
|
||||
${env.lib_deps}
|
||||
mysensorlibrary@^1.0.0
|
||||
```
|
||||
|
||||
Or use a conditional dependency if it's platform-specific.
|
||||
|
||||
## Unit Conversions
|
||||
|
||||
If the sensor reports values in non-standard units, use `src/modules/Telemetry/UnitConversions.h` for conversion helpers (e.g., Celsius ↔ Fahrenheit, hPa ↔ inHg).
|
||||
|
||||
## Checklist
|
||||
|
||||
- [ ] Create `src/modules/Telemetry/Sensor/MySensor.h` and `.cpp`
|
||||
- [ ] Inherit from `TelemetrySensor` base class
|
||||
- [ ] Implement `setup()` and `getMetrics()` methods
|
||||
- [ ] Add `meshtastic_TelemetrySensorType` enum entry in `telemetry.proto`
|
||||
- [ ] Add I2C address to `src/detect/ScanI2C` for auto-detection
|
||||
- [ ] Add protobuf fields in `telemetry.proto` if new data types needed
|
||||
- [ ] Regenerate protos: `bin/regen-protos.sh`
|
||||
- [ ] Wire into the appropriate telemetry module (Environment/AirQuality/Power/Health)
|
||||
- [ ] Add library dependency if external library required
|
||||
- [ ] Test on hardware or native build
|
||||
@@ -1,178 +0,0 @@
|
||||
# New Hardware Variant
|
||||
|
||||
Guide for adding a new Meshtastic hardware variant to the firmware.
|
||||
|
||||
## Directory Structure
|
||||
|
||||
Create under `variants/<arch>/<name>/`:
|
||||
|
||||
```text
|
||||
variants/
|
||||
├── esp32/ # ESP32
|
||||
├── esp32s3/ # ESP32-S3
|
||||
├── esp32c3/ # ESP32-C3
|
||||
├── esp32c6/ # ESP32-C6
|
||||
├── nrf52840/ # nRF52840
|
||||
├── rp2040/ # RP2040/RP2350
|
||||
├── stm32/ # STM32WL
|
||||
└── native/ # Linux/Portduino
|
||||
```
|
||||
|
||||
Each variant needs at minimum:
|
||||
|
||||
- `variant.h` — Pin definitions and hardware capabilities
|
||||
- `platformio.ini` — Build configuration
|
||||
|
||||
Optional files:
|
||||
|
||||
- `pins_arduino.h` — Arduino pin mapping overrides
|
||||
- `rfswitch.h` — RF switch control for multi-band radios
|
||||
- `nicheGraphics.h` — InkHUD e-ink configuration
|
||||
|
||||
## variant.h Template
|
||||
|
||||
```cpp
|
||||
// Pin definitions
|
||||
#define I2C_SDA 21
|
||||
#define I2C_SCL 22
|
||||
|
||||
// LoRa radio
|
||||
#define USE_SX1262 // Radio chip: USE_SX1262, USE_SX1268, USE_SX1280, USE_RF95, USE_LLCC68, USE_LR1110, USE_LR1120, USE_LR1121
|
||||
#define LORA_CS 18
|
||||
#define LORA_SCK 5
|
||||
#define LORA_MOSI 27
|
||||
#define LORA_MISO 19
|
||||
#define LORA_DIO1 33 // SX126x: DIO1, SX128x: DIO1, RF95: IRQ
|
||||
#define LORA_RESET 23
|
||||
#define LORA_BUSY 32 // SX126x/SX128x only
|
||||
#define SX126X_DIO2_AS_RF_SWITCH // Common for SX1262 boards
|
||||
|
||||
// GPS
|
||||
#define HAS_GPS 1
|
||||
#define GPS_RX_PIN 34
|
||||
#define GPS_TX_PIN 12
|
||||
// #define PIN_GPS_EN 47 // Optional GPS enable pin
|
||||
// #define GPS_BAUDRATE 9600 // Override default 9600
|
||||
|
||||
// Display
|
||||
#define HAS_SCREEN 1
|
||||
// #define USE_SSD1306 // OLED type
|
||||
// #define USE_SH1106 // Alternative OLED
|
||||
// #define USE_ST7789 // TFT type
|
||||
// #define SCREEN_WIDTH 128
|
||||
// #define SCREEN_HEIGHT 64
|
||||
|
||||
// LEDs
|
||||
#define LED_PIN 2 // Status LED (optional)
|
||||
// #define HAS_NEOPIXEL 1 // WS2812 support
|
||||
|
||||
// Buttons
|
||||
#define BUTTON_PIN 38
|
||||
// #define BUTTON_PIN_ALT 0 // Secondary button
|
||||
|
||||
// Power management
|
||||
// #define HAS_AXP192 1 // AXP192 PMU (T-Beam v1.0)
|
||||
// #define HAS_AXP2101 1 // AXP2101 PMU (T-Beam v1.2+)
|
||||
// #define BATTERY_PIN 35 // ADC battery voltage pin
|
||||
// #define ADC_MULTIPLIER 2.0 // Voltage divider ratio
|
||||
|
||||
// Optional I2C devices
|
||||
// #define HAS_RTC 1 // Real-time clock
|
||||
// #define HAS_TELEMETRY 1 // Enable telemetry sensor support
|
||||
// #define HAS_SENSOR 1 // I2C sensors present
|
||||
```
|
||||
|
||||
## platformio.ini Template
|
||||
|
||||
```ini
|
||||
[env:my_variant]
|
||||
extends = esp32s3_base ; Use architecture-specific base
|
||||
board = esp32-s3-devkitc-1 ; PlatformIO board definition (or custom in boards/)
|
||||
board_level = extra ; Build level: extra, or omit for default
|
||||
custom_meshtastic_support_level = 1 ; 1 = PR builds, 2 = merge builds only
|
||||
|
||||
build_flags =
|
||||
${esp32s3_base.build_flags}
|
||||
-D MY_VARIANT_SPECIFIC_FLAG=1
|
||||
-I variants/esp32s3/my_variant ; Include path for variant.h
|
||||
|
||||
upload_speed = 921600
|
||||
```
|
||||
|
||||
### Common Base Configs
|
||||
|
||||
- `esp32_base` / `esp32-common.ini` — ESP32
|
||||
- `esp32s3_base` — ESP32-S3
|
||||
- `esp32c3_base` — ESP32-C3
|
||||
- `esp32c6_base` — ESP32-C6
|
||||
- `nrf52840_base` / `nrf52.ini` — nRF52840
|
||||
- `rp2040_base` — RP2040/RP2350
|
||||
|
||||
### Support Levels
|
||||
|
||||
- `custom_meshtastic_support_level = 1` — Built on every PR (actively supported)
|
||||
- `custom_meshtastic_support_level = 2` — Built only on merge to main branches
|
||||
- `board_level = extra` — Only built on full releases
|
||||
|
||||
## Build Manifest Metadata
|
||||
|
||||
`bin/platformio-custom.py` emits UI capability flags in the build manifest:
|
||||
|
||||
- `custom_meshtastic_has_mui = true/false` — Override MUI detection
|
||||
- `custom_meshtastic_has_ink_hud = true/false` — Override InkHUD detection
|
||||
- Architecture names are normalized (e.g., `esp32s3` → `esp32-s3`)
|
||||
|
||||
## InkHUD E-Ink Variants
|
||||
|
||||
For e-ink display variants using the InkHUD framework, add `nicheGraphics.h`:
|
||||
|
||||
```cpp
|
||||
// nicheGraphics.h — InkHUD configuration for this variant
|
||||
#define INKHUD // Enable InkHUD
|
||||
// Configure display, applets, and refresh behavior per device
|
||||
```
|
||||
|
||||
InkHUD has its own PlatformIO config: `src/graphics/niche/InkHUD/PlatformioConfig.ini`
|
||||
|
||||
## I2C Device Detection
|
||||
|
||||
If the variant has I2C devices, ensure `src/detect/ScanI2C` will detect them. The auto-detection system handles 80+ device types including displays, sensors, RTCs, keyboards, PMUs, and touch controllers at boot.
|
||||
|
||||
## Custom Board Definitions
|
||||
|
||||
If the PlatformIO board doesn't exist, create a custom board JSON in `boards/`:
|
||||
|
||||
```json
|
||||
{
|
||||
"build": {
|
||||
"arduino": { "ldscript": "esp32s3_out.ld" },
|
||||
"core": "esp32",
|
||||
"f_cpu": "240000000L",
|
||||
"f_flash": "80000000L",
|
||||
"flash_mode": "qio",
|
||||
"mcu": "esp32s3",
|
||||
"variant": "esp32s3"
|
||||
},
|
||||
"connectivity": ["wifi", "bluetooth"],
|
||||
"frameworks": ["arduino", "espidf"],
|
||||
"name": "My Custom Board",
|
||||
"upload": {
|
||||
"flash_size": "8MB",
|
||||
"maximum_ram_size": 327680,
|
||||
"maximum_size": 8388608
|
||||
},
|
||||
"url": "https://example.com",
|
||||
"vendor": "MyVendor"
|
||||
}
|
||||
```
|
||||
|
||||
## Checklist
|
||||
|
||||
- [ ] Create `variants/<arch>/<name>/variant.h` with pin definitions
|
||||
- [ ] Create `variants/<arch>/<name>/platformio.ini` extending correct base
|
||||
- [ ] Set `custom_meshtastic_support_level` (1 or 2)
|
||||
- [ ] Verify radio chip define matches hardware (`USE_SX1262`, etc.)
|
||||
- [ ] Set hardware capability flags (`HAS_GPS`, `HAS_SCREEN`, etc.)
|
||||
- [ ] Add custom board JSON in `boards/` if needed
|
||||
- [ ] Test build: `pio run -e my_variant`
|
||||
- [ ] For e-ink: add `nicheGraphics.h` with InkHUD config
|
||||
@@ -1,28 +1,15 @@
|
||||
## 🙏 Thank you for sending in a pull request, here's some tips to get started!
|
||||
|
||||
### ❌ (Please delete all these tips and replace them with your text) ❌
|
||||
|
||||
## Thank you for sending in a pull request, here's some tips to get started!
|
||||
|
||||
- Before starting on some new big chunk of code, it it is optional but highly recommended to open an issue first
|
||||
to say "Hey, I think this idea X should be implemented and I'm starting work on it. My general plan is Y, any feedback
|
||||
is appreciated." This will allow other devs to potentially save you time by not accidentally duplicating work etc...
|
||||
is appreciated." This will allow other devs to potentially save you time by not accidentially duplicating work etc...
|
||||
- Please do not check in files that don't have real changes
|
||||
- Please do not reformat lines that you didn't have to change the code on
|
||||
- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor along with the ['Trunk Check' extension](https://marketplace.visualstudio.com/items?itemName=trunk.io) (In beta for windows, WSL2 for the Linux version),
|
||||
- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor along with the ['Trunk Check' extension](https://marketplace.visualstudio.com/items?itemName=trunk.io) (In beta for windows, WSL2 for the linux version),
|
||||
because it automatically follows our indentation rules and its auto reformatting will not cause spurious changes to lines.
|
||||
- If your PR fixes a bug, mention "fixes #bugnum" somewhere in your pull request description.
|
||||
- If your other co-developers have comments on your PR please tweak as needed.
|
||||
- Please also enable "Allow edits by maintainers".
|
||||
- Please do not submit untested code.
|
||||
- If you do not have the affected hardware to test your code changes adequately against regressions, please indicate this, so that contributors and community members can help test your changes.
|
||||
- If your PR gets accepted you can request a "Contributor" role in the Meshtastic Discord
|
||||
|
||||
## 🤝 Attestations
|
||||
|
||||
- [ ] I have tested that my proposed changes behave as described.
|
||||
- [ ] I have tested that my proposed changes do not cause any obvious regressions on the following devices:
|
||||
- [ ] Heltec (Lora32) V3
|
||||
- [ ] LilyGo T-Deck
|
||||
- [ ] LilyGo T-Beam
|
||||
- [ ] RAK WisBlock 4631
|
||||
- [ ] Seeed Studio T-1000E tracker card
|
||||
- [ ] Other (please specify below)
|
||||
|
||||
@@ -4,7 +4,7 @@ on:
|
||||
workflow_call:
|
||||
secrets:
|
||||
PPA_GPG_PRIVATE_KEY:
|
||||
required: false
|
||||
required: true
|
||||
inputs:
|
||||
series:
|
||||
description: Ubuntu/Debian series to target
|
||||
@@ -16,36 +16,33 @@ on:
|
||||
type: string
|
||||
|
||||
permissions:
|
||||
contents: read
|
||||
contents: write
|
||||
packages: write
|
||||
|
||||
jobs:
|
||||
build-debian-src:
|
||||
runs-on: ubuntu-24.04
|
||||
steps:
|
||||
- name: Checkout code
|
||||
uses: actions/checkout@v6
|
||||
uses: actions/checkout@v4
|
||||
with:
|
||||
submodules: recursive
|
||||
path: meshtasticd
|
||||
ref: ${{github.event.pull_request.head.ref}}
|
||||
repository: ${{github.event.pull_request.head.repo.full_name}}
|
||||
|
||||
- name: Install deps
|
||||
shell: bash
|
||||
working-directory: meshtasticd
|
||||
run: |
|
||||
# Build-tools (notably platformio) come from the Meshtastic project
|
||||
# on the OpenSUSE Build Service:
|
||||
# https://build.opensuse.org/project/show/network:Meshtastic:build-tools
|
||||
echo 'deb http://download.opensuse.org/repositories/network:/Meshtastic:/build-tools/xUbuntu_24.04/ /' \
|
||||
| sudo tee /etc/apt/sources.list.d/network:Meshtastic:build-tools.list
|
||||
curl -fsSL https://download.opensuse.org/repositories/network:Meshtastic:build-tools/xUbuntu_24.04/Release.key \
|
||||
| gpg --dearmor | sudo tee /etc/apt/trusted.gpg.d/network_Meshtastic_build-tools.gpg >/dev/null
|
||||
sudo apt-get update -y --fix-missing
|
||||
sudo apt-get install -y build-essential devscripts equivs
|
||||
sudo apt-get install -y software-properties-common build-essential devscripts equivs
|
||||
sudo add-apt-repository ppa:meshtastic/build-tools -y
|
||||
sudo apt-get update -y --fix-missing
|
||||
sudo mk-build-deps --install --remove --tool='apt-get -o Debug::pkgProblemResolver=yes --no-install-recommends --yes' debian/control
|
||||
|
||||
- name: Import GPG key
|
||||
if: github.event_name != 'pull_request' && github.event_name != 'pull_request_target'
|
||||
uses: crazy-max/ghaction-import-gpg@v7
|
||||
uses: crazy-max/ghaction-import-gpg@v6
|
||||
with:
|
||||
gpg_private_key: ${{ secrets.PPA_GPG_PRIVATE_KEY }}
|
||||
id: gpg
|
||||
@@ -63,11 +60,11 @@ jobs:
|
||||
run: debian/ci_pack_sdeb.sh
|
||||
env:
|
||||
SERIES: ${{ inputs.series }}
|
||||
GPG_KEY_ID: ${{ steps.gpg.outputs.keyid || '' }}
|
||||
GPG_KEY_ID: ${{ steps.gpg.outputs.keyid }}
|
||||
PKG_VERSION: ${{ steps.version.outputs.deb }}
|
||||
|
||||
- name: Store binaries as an artifact
|
||||
uses: actions/upload-artifact@v7
|
||||
uses: actions/upload-artifact@v4
|
||||
with:
|
||||
name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
|
||||
overwrite: true
|
||||
|
||||
@@ -0,0 +1,37 @@
|
||||
name: Build ESP32
|
||||
|
||||
on:
|
||||
workflow_call:
|
||||
inputs:
|
||||
board:
|
||||
required: true
|
||||
type: string
|
||||
|
||||
permissions: read-all
|
||||
|
||||
jobs:
|
||||
build-esp32:
|
||||
runs-on: ubuntu-latest
|
||||
steps:
|
||||
- uses: actions/checkout@v4
|
||||
|
||||
- name: Build ESP32
|
||||
id: build
|
||||
uses: ./.github/actions/build-variant
|
||||
with:
|
||||
github_token: ${{ secrets.GITHUB_TOKEN }}
|
||||
board: ${{ inputs.board }}
|
||||
remove-debug-flags: >-
|
||||
./arch/esp32/esp32.ini
|
||||
./arch/esp32/esp32s2.ini
|
||||
./arch/esp32/esp32s3.ini
|
||||
./arch/esp32/esp32c3.ini
|
||||
./arch/esp32/esp32c6.ini
|
||||
build-script-path: bin/build-esp32.sh
|
||||
ota-firmware-source: firmware.bin
|
||||
ota-firmware-target: release/bleota.bin
|
||||
artifact-paths: |
|
||||
release/*.bin
|
||||
release/*.elf
|
||||
include-web-ui: true
|
||||
arch: esp32
|
||||
@@ -0,0 +1,37 @@
|
||||
name: Build ESP32-C3
|
||||
|
||||
on:
|
||||
workflow_call:
|
||||
inputs:
|
||||
board:
|
||||
required: true
|
||||
type: string
|
||||
|
||||
permissions: read-all
|
||||
|
||||
jobs:
|
||||
build-esp32-c3:
|
||||
runs-on: ubuntu-latest
|
||||
steps:
|
||||
- uses: actions/checkout@v4
|
||||
|
||||
- name: Build ESP32-C3
|
||||
id: build
|
||||
uses: ./.github/actions/build-variant
|
||||
with:
|
||||
github_token: ${{ secrets.GITHUB_TOKEN }}
|
||||
board: ${{ inputs.board }}
|
||||
remove-debug-flags: >-
|
||||
./arch/esp32/esp32.ini
|
||||
./arch/esp32/esp32s2.ini
|
||||
./arch/esp32/esp32s3.ini
|
||||
./arch/esp32/esp32c3.ini
|
||||
./arch/esp32/esp32c6.ini
|
||||
build-script-path: bin/build-esp32.sh
|
||||
ota-firmware-source: firmware-c3.bin
|
||||
ota-firmware-target: release/bleota-c3.bin
|
||||
artifact-paths: |
|
||||
release/*.bin
|
||||
release/*.elf
|
||||
include-web-ui: true
|
||||
arch: esp32c3
|
||||
@@ -0,0 +1,37 @@
|
||||
name: Build ESP32-C6
|
||||
|
||||
on:
|
||||
workflow_call:
|
||||
inputs:
|
||||
board:
|
||||
required: true
|
||||
type: string
|
||||
|
||||
permissions: read-all
|
||||
|
||||
jobs:
|
||||
build-esp32-c6:
|
||||
runs-on: ubuntu-latest
|
||||
steps:
|
||||
- uses: actions/checkout@v4
|
||||
|
||||
- name: Build ESP32-C6
|
||||
id: build
|
||||
uses: ./.github/actions/build-variant
|
||||
with:
|
||||
github_token: ${{ secrets.GITHUB_TOKEN }}
|
||||
board: ${{ inputs.board }}
|
||||
remove-debug-flags: >-
|
||||
./arch/esp32/esp32.ini
|
||||
./arch/esp32/esp32s2.ini
|
||||
./arch/esp32/esp32s3.ini
|
||||
./arch/esp32/esp32c3.ini
|
||||
./arch/esp32/esp32c6.ini
|
||||
build-script-path: bin/build-esp32.sh
|
||||
ota-firmware-source: firmware-c3.bin
|
||||
ota-firmware-target: release/bleota-c3.bin
|
||||
artifact-paths: |
|
||||
release/*.bin
|
||||
release/*.elf
|
||||
include-web-ui: true
|
||||
arch: esp32c6
|
||||
@@ -0,0 +1,37 @@
|
||||
name: Build ESP32-S3
|
||||
|
||||
on:
|
||||
workflow_call:
|
||||
inputs:
|
||||
board:
|
||||
required: true
|
||||
type: string
|
||||
|
||||
permissions: read-all
|
||||
|
||||
jobs:
|
||||
build-esp32-s3:
|
||||
runs-on: ubuntu-latest
|
||||
steps:
|
||||
- uses: actions/checkout@v4
|
||||
|
||||
- name: Build ESP32-S3
|
||||
id: build
|
||||
uses: ./.github/actions/build-variant
|
||||
with:
|
||||
github_token: ${{ secrets.GITHUB_TOKEN }}
|
||||
board: ${{ inputs.board }}
|
||||
remove-debug-flags: >-
|
||||
./arch/esp32/esp32.ini
|
||||
./arch/esp32/esp32s2.ini
|
||||
./arch/esp32/esp32s3.ini
|
||||
./arch/esp32/esp32c3.ini
|
||||
./arch/esp32/esp32c6.ini
|
||||
build-script-path: bin/build-esp32.sh
|
||||
ota-firmware-source: firmware-s3.bin
|
||||
ota-firmware-target: release/bleota-s3.bin
|
||||
artifact-paths: |
|
||||
release/*.bin
|
||||
release/*.elf
|
||||
include-web-ui: true
|
||||
arch: esp32s3
|
||||
@@ -1,134 +0,0 @@
|
||||
name: Build
|
||||
|
||||
on:
|
||||
workflow_call:
|
||||
inputs:
|
||||
version:
|
||||
required: true
|
||||
type: string
|
||||
platform:
|
||||
required: true
|
||||
type: string
|
||||
pio_env:
|
||||
required: true
|
||||
type: string
|
||||
|
||||
permissions: read-all
|
||||
|
||||
jobs:
|
||||
pio-build:
|
||||
name: build-${{ inputs.platform }}
|
||||
# Use 'arctastic' self-hosted runner pool when building in the main repo
|
||||
runs-on: ${{ github.repository_owner == 'meshtastic' && 'arctastic' || 'ubuntu-latest' }}
|
||||
outputs:
|
||||
artifact-id: ${{ steps.upload-firmware.outputs.artifact-id }}
|
||||
steps:
|
||||
- uses: actions/checkout@v6
|
||||
with:
|
||||
submodules: recursive
|
||||
|
||||
- name: Build ${{ inputs.platform }}
|
||||
id: build
|
||||
uses: meshtastic/gh-action-firmware@main
|
||||
with:
|
||||
pio_platform: ${{ inputs.platform }}
|
||||
pio_env: ${{ inputs.pio_env }}
|
||||
pio_target: build
|
||||
|
||||
- name: ESP32 - Download Unified OTA firmware
|
||||
# Currently only esp32 and esp32s3 use the unified ota
|
||||
if: inputs.platform == 'esp32' || inputs.platform == 'esp32s3'
|
||||
id: dl-ota-unified
|
||||
env:
|
||||
PIO_PLATFORM: ${{ inputs.platform }}
|
||||
PIO_ENV: ${{ inputs.pio_env }}
|
||||
OTA_URL: https://github.com/meshtastic/esp32-unified-ota/releases/latest/download/mt-${{ inputs.platform }}-ota.bin
|
||||
working-directory: release
|
||||
run: |
|
||||
curl -L -o "mt-$PIO_PLATFORM-ota.bin" $OTA_URL
|
||||
|
||||
- name: ESP32-C* - Download BLE-Only OTA firmware
|
||||
if: inputs.platform == 'esp32c3' || inputs.platform == 'esp32c6'
|
||||
id: dl-ota-ble
|
||||
env:
|
||||
PIO_ENV: ${{ inputs.pio_env }}
|
||||
OTA_URL: https://github.com/meshtastic/firmware-ota/releases/latest/download/firmware-c3.bin
|
||||
working-directory: release
|
||||
run: |
|
||||
curl -L -o bleota-c3.bin $OTA_URL
|
||||
|
||||
- name: Update manifest with OTA file
|
||||
if: inputs.platform == 'esp32' || inputs.platform == 'esp32s3' || inputs.platform == 'esp32c3' || inputs.platform == 'esp32c6'
|
||||
working-directory: release
|
||||
env:
|
||||
PIO_PLATFORM: ${{ inputs.platform }}
|
||||
run: |
|
||||
# Determine OTA filename based on platform
|
||||
if [[ "$PIO_PLATFORM" == "esp32" || "$PIO_PLATFORM" == "esp32s3" ]]; then
|
||||
OTA_FILE="mt-${PIO_PLATFORM}-ota.bin"
|
||||
else
|
||||
OTA_FILE="bleota-c3.bin"
|
||||
fi
|
||||
|
||||
# Check if OTA file exists
|
||||
if [[ ! -f "$OTA_FILE" ]]; then
|
||||
echo "OTA file $OTA_FILE not found, skipping manifest update"
|
||||
exit 0
|
||||
fi
|
||||
|
||||
# Calculate MD5 and size
|
||||
if command -v md5sum &> /dev/null; then
|
||||
OTA_MD5=$(md5sum "$OTA_FILE" | cut -d' ' -f1)
|
||||
else
|
||||
OTA_MD5=$(md5 -q "$OTA_FILE")
|
||||
fi
|
||||
OTA_SIZE=$(stat -f%z "$OTA_FILE" 2>/dev/null || stat -c%s "$OTA_FILE")
|
||||
|
||||
# Find and update manifest file
|
||||
for manifest in firmware-*.mt.json; do
|
||||
if [[ -f "$manifest" ]]; then
|
||||
echo "Updating $manifest with $OTA_FILE (md5: $OTA_MD5, size: $OTA_SIZE)"
|
||||
# Add OTA entry to files array if not already present
|
||||
jq --arg name "$OTA_FILE" --arg md5 "$OTA_MD5" --argjson bytes "$OTA_SIZE" --arg part "app1" \
|
||||
'if .files | map(select(.name == $name)) | length == 0 then .files += [{"name": $name, "md5": $md5, "bytes": $bytes, "part_name": $part}] else . end' \
|
||||
"$manifest" > "${manifest}.tmp" && mv "${manifest}.tmp" "$manifest"
|
||||
fi
|
||||
done
|
||||
|
||||
- name: Job summary
|
||||
env:
|
||||
PIO_ENV: ${{ inputs.pio_env }}
|
||||
run: |
|
||||
echo "## $PIO_ENV" >> $GITHUB_STEP_SUMMARY
|
||||
echo "<details><summary><strong>Manifest</strong></summary>" >> $GITHUB_STEP_SUMMARY
|
||||
echo '' >> $GITHUB_STEP_SUMMARY
|
||||
echo '```json' >> $GITHUB_STEP_SUMMARY
|
||||
cat release/firmware-*.mt.json >> $GITHUB_STEP_SUMMARY
|
||||
echo '' >> $GITHUB_STEP_SUMMARY
|
||||
echo '```' >> $GITHUB_STEP_SUMMARY
|
||||
echo "</details>" >> $GITHUB_STEP_SUMMARY
|
||||
|
||||
- name: Store binaries as an artifact
|
||||
uses: actions/upload-artifact@v7
|
||||
id: upload-firmware
|
||||
with:
|
||||
name: firmware-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}
|
||||
overwrite: true
|
||||
path: |
|
||||
release/*.mt.json
|
||||
release/*.bin
|
||||
release/*.elf
|
||||
release/*.uf2
|
||||
release/*.hex
|
||||
release/*.zip
|
||||
release/device-*.sh
|
||||
release/device-*.bat
|
||||
|
||||
- name: Store manifests as an artifact
|
||||
uses: actions/upload-artifact@v7
|
||||
id: upload-manifest
|
||||
with:
|
||||
name: manifest-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}
|
||||
overwrite: true
|
||||
path: |
|
||||
release/*.mt.json
|
||||
@@ -1,51 +0,0 @@
|
||||
name: Build MacOS Binary
|
||||
|
||||
on:
|
||||
workflow_call:
|
||||
inputs:
|
||||
macos_ver:
|
||||
required: false
|
||||
default: "26" # ARM64
|
||||
type: string
|
||||
|
||||
permissions:
|
||||
contents: read
|
||||
|
||||
jobs:
|
||||
build-MacOS:
|
||||
runs-on: macos-${{ inputs.macos_ver }}
|
||||
steps:
|
||||
- name: Checkout code
|
||||
uses: actions/checkout@v6
|
||||
with:
|
||||
submodules: recursive
|
||||
|
||||
- name: Install deps
|
||||
shell: bash
|
||||
run: |
|
||||
brew update
|
||||
brew install platformio yaml-cpp libuv openssl@3 libusb argp-standalone pkg-config ulfius
|
||||
|
||||
- name: Get release version string
|
||||
run: |
|
||||
echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
|
||||
id: version
|
||||
|
||||
- name: Build for MacOS
|
||||
run: |
|
||||
platformio run -e native-macos
|
||||
env:
|
||||
PKG_VERSION: ${{ steps.version.outputs.long }}
|
||||
# Errors in this step should not fail the entire workflow while MacOS support is in development.
|
||||
continue-on-error: true
|
||||
|
||||
- name: List output files
|
||||
run: ls -lah .pio/build/native-macos/
|
||||
|
||||
- name: Store binaries as an artifact
|
||||
uses: actions/upload-artifact@v7
|
||||
with:
|
||||
name: firmware-macos-${{ inputs.macos_ver }}-${{ steps.version.outputs.long }}
|
||||
overwrite: true
|
||||
path: |
|
||||
.pio/build/native-macos/meshtasticd
|
||||
@@ -0,0 +1,38 @@
|
||||
name: Build Native
|
||||
|
||||
on: workflow_call
|
||||
|
||||
permissions:
|
||||
contents: write
|
||||
packages: write
|
||||
|
||||
jobs:
|
||||
build-native:
|
||||
runs-on: ubuntu-latest
|
||||
steps:
|
||||
- name: Checkout code
|
||||
uses: actions/checkout@v4
|
||||
with:
|
||||
submodules: recursive
|
||||
ref: ${{github.event.pull_request.head.ref}}
|
||||
repository: ${{github.event.pull_request.head.repo.full_name}}
|
||||
|
||||
- name: Setup native build
|
||||
id: base
|
||||
uses: ./.github/actions/setup-native
|
||||
|
||||
- name: Build Native
|
||||
run: bin/build-native.sh
|
||||
|
||||
- name: Get release version string
|
||||
run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
|
||||
id: version
|
||||
|
||||
- name: Store binaries as an artifact
|
||||
uses: actions/upload-artifact@v4
|
||||
with:
|
||||
name: firmware-native-${{ steps.version.outputs.long }}.zip
|
||||
overwrite: true
|
||||
path: |
|
||||
release/meshtasticd_linux_x86_64
|
||||
bin/config-dist.yaml
|
||||
@@ -0,0 +1,28 @@
|
||||
name: Build NRF52
|
||||
|
||||
on:
|
||||
workflow_call:
|
||||
inputs:
|
||||
board:
|
||||
required: true
|
||||
type: string
|
||||
|
||||
jobs:
|
||||
build-nrf52:
|
||||
runs-on: ubuntu-latest
|
||||
steps:
|
||||
- uses: actions/checkout@v4
|
||||
|
||||
- name: Build NRF52
|
||||
id: build
|
||||
uses: ./.github/actions/build-variant
|
||||
with:
|
||||
github_token: ${{ secrets.GITHUB_TOKEN }}
|
||||
board: ${{ inputs.board }}
|
||||
build-script-path: bin/build-nrf52.sh
|
||||
artifact-paths: |
|
||||
release/*.hex
|
||||
release/*.uf2
|
||||
release/*.elf
|
||||
release/*.zip
|
||||
arch: nrf52840
|
||||
@@ -1,175 +0,0 @@
|
||||
name: Build One Target
|
||||
|
||||
on:
|
||||
workflow_dispatch:
|
||||
inputs:
|
||||
# trunk-ignore(checkov/CKV_GHA_7)
|
||||
target:
|
||||
type: string
|
||||
required: false
|
||||
description: Choose the target board, e.g. nrf52_promicro_diy_tcxo. If blank, will find available targets.
|
||||
arch:
|
||||
type: choice
|
||||
options:
|
||||
- all
|
||||
- esp32
|
||||
- esp32s3
|
||||
- esp32c3
|
||||
- esp32c6
|
||||
- nrf52840
|
||||
- rp2040
|
||||
- rp2350
|
||||
- stm32
|
||||
description: Choose an arch to limit the search, or 'all' to search all architectures.
|
||||
default: all
|
||||
|
||||
permissions: read-all
|
||||
|
||||
jobs:
|
||||
find-targets:
|
||||
strategy:
|
||||
fail-fast: false
|
||||
matrix:
|
||||
arch:
|
||||
- all
|
||||
runs-on: ubuntu-24.04
|
||||
steps:
|
||||
- uses: actions/checkout@v6
|
||||
- uses: actions/setup-python@v6
|
||||
with:
|
||||
python-version: 3.x
|
||||
cache: pip
|
||||
- run: pip install -U platformio
|
||||
- name: Generate matrix
|
||||
id: jsonStep
|
||||
env:
|
||||
BUILDTARGET: ${{ inputs.target }}
|
||||
MATRIXARCH: ${{ inputs.arch }}
|
||||
run: |
|
||||
TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} --level extra)
|
||||
if [ "$BUILDTARGET" = "" ]; then
|
||||
echo "Name: $GITHUB_REF_NAME" >> $GITHUB_STEP_SUMMARY
|
||||
echo "Base: $GITHUB_BASE_REF" >> $GITHUB_STEP_SUMMARY
|
||||
echo "Arch: $MATRIXARCH" >> $GITHUB_STEP_SUMMARY
|
||||
echo "Ref: $GITHUB_REF" >> $GITHUB_STEP_SUMMARY
|
||||
echo "## 🎯 The following target boards are available to build:" >> $GITHUB_STEP_SUMMARY
|
||||
echo "| Platform | Board |" >> $GITHUB_STEP_SUMMARY
|
||||
echo "| -------- | ----- |" >> $GITHUB_STEP_SUMMARY
|
||||
echo $TARGETS | jq -r 'sort_by(.board) | sort_by(.platform) |.[] | "| " + .platform + " | " + .board + " |" ' >> $GITHUB_STEP_SUMMARY
|
||||
else
|
||||
echo "We build this one:" >> $GITHUB_STEP_SUMMARY
|
||||
ARCH=$(echo "$TARGETS" | jq --arg BUILDTARGET "$BUILDTARGET" -r '.[] | select(.board==$BUILDTARGET) | .platform')
|
||||
echo "| Platform | Board |" >> $GITHUB_STEP_SUMMARY
|
||||
echo "| -------- | ----- |" >> $GITHUB_STEP_SUMMARY
|
||||
echo "| $ARCH | "$BUILDTARGET" |" >> $GITHUB_STEP_SUMMARY
|
||||
echo "" >> $GITHUB_STEP_SUMMARY
|
||||
if [[ "$ARCH" == "" ]]; then
|
||||
echo "## ❌ Error: Target "$BUILDTARGET" not found!" >> $GITHUB_STEP_SUMMARY
|
||||
else
|
||||
echo "## ✅ Target "$BUILDTARGET" found, proceeding to build." >> $GITHUB_STEP_SUMMARY
|
||||
fi
|
||||
echo "You may need to refresh this page to make the built firmware appear below." >> $GITHUB_STEP_SUMMARY
|
||||
echo "arch=$ARCH" >> $GITHUB_OUTPUT
|
||||
fi
|
||||
outputs:
|
||||
arch: ${{ steps.jsonStep.outputs.arch }}
|
||||
|
||||
version:
|
||||
if: ${{ inputs.target != '' }}
|
||||
runs-on: ubuntu-latest
|
||||
steps:
|
||||
- uses: actions/checkout@v6
|
||||
- name: Get release version string
|
||||
run: |
|
||||
echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
|
||||
echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
|
||||
id: version
|
||||
env:
|
||||
BUILD_LOCATION: local
|
||||
outputs:
|
||||
long: ${{ steps.version.outputs.long }}
|
||||
deb: ${{ steps.version.outputs.deb }}
|
||||
|
||||
build:
|
||||
if: ${{ inputs.target != '' && inputs.arch != 'native' }}
|
||||
needs: [version, find-targets]
|
||||
uses: ./.github/workflows/build_firmware.yml
|
||||
with:
|
||||
version: ${{ needs.version.outputs.long }}
|
||||
pio_env: ${{ inputs.target }}
|
||||
platform: ${{ needs.find-targets.outputs.arch }}
|
||||
|
||||
gather-artifacts:
|
||||
permissions:
|
||||
contents: read
|
||||
pull-requests: write
|
||||
runs-on: ubuntu-latest
|
||||
needs: [version, build]
|
||||
steps:
|
||||
- name: Checkout code
|
||||
uses: actions/checkout@v6
|
||||
with:
|
||||
ref: ${{github.event.pull_request.head.ref}}
|
||||
repository: ${{github.event.pull_request.head.repo.full_name}}
|
||||
|
||||
- uses: actions/download-artifact@v8
|
||||
with:
|
||||
path: ./
|
||||
pattern: firmware-*-*
|
||||
merge-multiple: true
|
||||
|
||||
- name: Display structure of downloaded files
|
||||
run: ls -R
|
||||
|
||||
- name: Move files up
|
||||
run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
|
||||
|
||||
- name: Repackage in single firmware zip
|
||||
uses: actions/upload-artifact@v7
|
||||
with:
|
||||
name: firmware-${{inputs.target}}-${{ needs.version.outputs.long }}
|
||||
overwrite: true
|
||||
path: |
|
||||
./firmware-*.bin
|
||||
./firmware-*.uf2
|
||||
./firmware-*.hex
|
||||
./firmware-*.zip
|
||||
./device-*.sh
|
||||
./device-*.bat
|
||||
./littlefs-*.bin
|
||||
./bleota*bin
|
||||
./Meshtastic_nRF52_factory_erase*.uf2
|
||||
retention-days: 30
|
||||
|
||||
- uses: actions/download-artifact@v8
|
||||
with:
|
||||
pattern: firmware-*-${{ needs.version.outputs.long }}
|
||||
merge-multiple: true
|
||||
path: ./output
|
||||
|
||||
# For diagnostics
|
||||
- name: Show artifacts
|
||||
run: ls -lR
|
||||
|
||||
- name: Device scripts permissions
|
||||
run: |
|
||||
chmod +x ./output/device-install.sh || true
|
||||
chmod +x ./output/device-update.sh || true
|
||||
|
||||
- name: Zip firmware
|
||||
run: zip -j -9 -r ./firmware-${{inputs.target}}-${{ needs.version.outputs.long }}.zip ./output
|
||||
|
||||
- name: Repackage in single elfs zip
|
||||
uses: actions/upload-artifact@v7
|
||||
with:
|
||||
name: debug-elfs-${{inputs.target}}-${{ needs.version.outputs.long }}.zip
|
||||
overwrite: true
|
||||
path: ./*.elf
|
||||
retention-days: 30
|
||||
|
||||
- uses: scruplelesswizard/comment-artifact@main
|
||||
if: ${{ github.event_name == 'pull_request' }}
|
||||
with:
|
||||
name: firmware-${{inputs.target}}-${{ needs.version.outputs.long }}
|
||||
description: "Download firmware-${{inputs.target}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
|
||||
github-token: ${{ secrets.GITHUB_TOKEN }}
|
||||
@@ -0,0 +1,52 @@
|
||||
name: Build Raspbian
|
||||
|
||||
on: workflow_call
|
||||
|
||||
permissions:
|
||||
contents: write
|
||||
packages: write
|
||||
|
||||
jobs:
|
||||
build-raspbian:
|
||||
runs-on: [self-hosted, linux, ARM64]
|
||||
steps:
|
||||
- name: Install libbluetooth
|
||||
shell: bash
|
||||
run: |
|
||||
sudo apt-get update -y --fix-missing
|
||||
sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev libusb-1.0-0-dev libi2c-dev
|
||||
|
||||
- name: Checkout code
|
||||
uses: actions/checkout@v4
|
||||
with:
|
||||
submodules: recursive
|
||||
ref: ${{github.event.pull_request.head.ref}}
|
||||
repository: ${{github.event.pull_request.head.repo.full_name}}
|
||||
|
||||
- name: Upgrade python tools
|
||||
shell: bash
|
||||
run: |
|
||||
python -m pip install --upgrade pip
|
||||
pip install -U platformio adafruit-nrfutil
|
||||
pip install -U meshtastic --pre
|
||||
|
||||
- name: Upgrade platformio
|
||||
shell: bash
|
||||
run: |
|
||||
pio upgrade
|
||||
|
||||
- name: Build Raspbian
|
||||
run: bin/build-native.sh
|
||||
|
||||
- name: Get release version string
|
||||
run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
|
||||
id: version
|
||||
|
||||
- name: Store binaries as an artifact
|
||||
uses: actions/upload-artifact@v4
|
||||
with:
|
||||
name: firmware-raspbian-${{ steps.version.outputs.long }}.zip
|
||||
overwrite: true
|
||||
path: |
|
||||
release/meshtasticd_linux_aarch64
|
||||
bin/config-dist.yaml
|
||||
@@ -0,0 +1,52 @@
|
||||
name: Build Raspbian Arm
|
||||
|
||||
on: workflow_call
|
||||
|
||||
permissions:
|
||||
contents: write
|
||||
packages: write
|
||||
|
||||
jobs:
|
||||
build-raspbian-armv7l:
|
||||
runs-on: [self-hosted, linux, ARM]
|
||||
steps:
|
||||
- name: Install libbluetooth
|
||||
shell: bash
|
||||
run: |
|
||||
sudo apt-get update -y --fix-missing
|
||||
sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev libusb-1.0-0-dev libi2c-dev
|
||||
|
||||
- name: Checkout code
|
||||
uses: actions/checkout@v4
|
||||
with:
|
||||
submodules: recursive
|
||||
ref: ${{github.event.pull_request.head.ref}}
|
||||
repository: ${{github.event.pull_request.head.repo.full_name}}
|
||||
|
||||
- name: Upgrade python tools
|
||||
shell: bash
|
||||
run: |
|
||||
python -m pip install --upgrade pip
|
||||
pip install -U platformio adafruit-nrfutil
|
||||
pip install -U meshtastic --pre
|
||||
|
||||
- name: Upgrade platformio
|
||||
shell: bash
|
||||
run: |
|
||||
pio upgrade
|
||||
|
||||
- name: Build Raspbian
|
||||
run: bin/build-native.sh
|
||||
|
||||
- name: Get release version string
|
||||
run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
|
||||
id: version
|
||||
|
||||
- name: Store binaries as an artifact
|
||||
uses: actions/upload-artifact@v4
|
||||
with:
|
||||
name: firmware-raspbian-armv7l-${{ steps.version.outputs.long }}.zip
|
||||
overwrite: true
|
||||
path: |
|
||||
release/meshtasticd_linux_armv7l
|
||||
bin/config-dist.yaml
|
||||
@@ -0,0 +1,26 @@
|
||||
name: Build RPI2040
|
||||
|
||||
on:
|
||||
workflow_call:
|
||||
inputs:
|
||||
board:
|
||||
required: true
|
||||
type: string
|
||||
|
||||
jobs:
|
||||
build-rpi2040:
|
||||
runs-on: ubuntu-latest
|
||||
steps:
|
||||
- uses: actions/checkout@v4
|
||||
|
||||
- name: Build Raspberry Pi 2040
|
||||
id: build
|
||||
uses: ./.github/actions/build-variant
|
||||
with:
|
||||
github_token: ${{ secrets.GITHUB_TOKEN }}
|
||||
board: ${{ inputs.board }}
|
||||
build-script-path: bin/build-rpi2040.sh
|
||||
artifact-paths: |
|
||||
release/*.uf2
|
||||
release/*.elf
|
||||
arch: rp2040
|
||||
@@ -0,0 +1,27 @@
|
||||
name: Build STM32
|
||||
|
||||
on:
|
||||
workflow_call:
|
||||
inputs:
|
||||
board:
|
||||
required: true
|
||||
type: string
|
||||
|
||||
jobs:
|
||||
build-stm32:
|
||||
runs-on: ubuntu-latest
|
||||
steps:
|
||||
- uses: actions/checkout@v4
|
||||
|
||||
- name: Build STM32WL
|
||||
id: build
|
||||
uses: ./.github/actions/build-variant
|
||||
with:
|
||||
github_token: ${{ secrets.GITHUB_TOKEN }}
|
||||
board: ${{ inputs.board }}
|
||||
build-script-path: bin/build-stm32.sh
|
||||
artifact-paths: |
|
||||
release/*.hex
|
||||
release/*.bin
|
||||
release/*.elf
|
||||
arch: stm32
|
||||
@@ -1,11 +1,11 @@
|
||||
name: Daily Packaging
|
||||
on:
|
||||
schedule:
|
||||
- cron: 0 2 * * *
|
||||
- cron: 0 9 * * *
|
||||
workflow_dispatch:
|
||||
push:
|
||||
branches:
|
||||
- develop # Default branch, same as 'cron' above
|
||||
- master
|
||||
paths:
|
||||
- debian/**
|
||||
- "*.rpkg"
|
||||
@@ -16,27 +16,21 @@ on:
|
||||
- .github/workflows/hook_copr.yml
|
||||
|
||||
permissions:
|
||||
contents: read
|
||||
contents: write
|
||||
packages: write
|
||||
|
||||
jobs:
|
||||
docker-multiarch:
|
||||
if: github.repository == 'meshtastic/firmware'
|
||||
uses: ./.github/workflows/docker_manifest.yml
|
||||
with:
|
||||
release_channel: daily
|
||||
secrets: inherit
|
||||
|
||||
package-ppa:
|
||||
if: github.repository == 'meshtastic/firmware'
|
||||
strategy:
|
||||
fail-fast: false
|
||||
matrix:
|
||||
series:
|
||||
- jammy # 22.04 LTS
|
||||
- noble # 24.04 LTS
|
||||
- questing # 25.10
|
||||
- resolute # 26.04 LTS
|
||||
series: [plucky, oracular, noble, jammy]
|
||||
uses: ./.github/workflows/package_ppa.yml
|
||||
with:
|
||||
ppa_repo: ppa:meshtastic/daily
|
||||
@@ -44,7 +38,6 @@ jobs:
|
||||
secrets: inherit
|
||||
|
||||
package-obs:
|
||||
if: github.repository == 'meshtastic/firmware'
|
||||
uses: ./.github/workflows/package_obs.yml
|
||||
with:
|
||||
obs_project: network:Meshtastic:daily
|
||||
@@ -52,7 +45,6 @@ jobs:
|
||||
secrets: inherit
|
||||
|
||||
hook-copr:
|
||||
if: github.repository == 'meshtastic/firmware'
|
||||
uses: ./.github/workflows/hook_copr.yml
|
||||
with:
|
||||
copr_project: daily
|
||||
|
||||
@@ -26,18 +26,13 @@ on:
|
||||
required: false
|
||||
type: boolean
|
||||
default: false
|
||||
pio_env:
|
||||
description: PlatformIO environment to build
|
||||
required: false
|
||||
type: string
|
||||
default: native
|
||||
outputs:
|
||||
digest:
|
||||
description: Digest of built image
|
||||
value: ${{ jobs.docker-build.outputs.digest }}
|
||||
|
||||
permissions:
|
||||
contents: read
|
||||
contents: write
|
||||
packages: write
|
||||
|
||||
jobs:
|
||||
@@ -47,46 +42,38 @@ jobs:
|
||||
runs-on: ${{ inputs.runs-on }}
|
||||
steps:
|
||||
- name: Checkout code
|
||||
uses: actions/checkout@v6
|
||||
uses: actions/checkout@v4
|
||||
with:
|
||||
submodules: recursive
|
||||
ref: ${{github.event.pull_request.head.ref}}
|
||||
repository: ${{github.event.pull_request.head.repo.full_name}}
|
||||
|
||||
- name: Get release version string
|
||||
run: |
|
||||
echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
|
||||
id: version
|
||||
|
||||
- name: Set up QEMU
|
||||
uses: docker/setup-qemu-action@v4
|
||||
with:
|
||||
cache-image: true
|
||||
|
||||
- name: Docker setup
|
||||
uses: docker/setup-buildx-action@v4
|
||||
with:
|
||||
# Add Google/Amazon DockerHub mirrors to buildkit config
|
||||
# https://docs.docker.com/build/ci/github-actions/configure-builder/#registry-mirror
|
||||
buildkitd-config-inline: |
|
||||
[registry."docker.io"]
|
||||
mirrors = ["mirror.gcr.io", "public.ecr.aws"]
|
||||
|
||||
- name: Sanitize platform string
|
||||
id: sanitize_platform
|
||||
# Replace slashes with underscores
|
||||
env:
|
||||
plat: ${{ inputs.platform }}
|
||||
run: echo "cleaned_platform=${plat}" | sed 's/\//_/g' >> $GITHUB_OUTPUT
|
||||
|
||||
- name: Docker login
|
||||
if: ${{ inputs.push }}
|
||||
uses: docker/login-action@v4
|
||||
uses: docker/login-action@v3
|
||||
with:
|
||||
username: meshtastic
|
||||
password: ${{ secrets.DOCKER_FIRMWARE_TOKEN }}
|
||||
|
||||
- name: Set up QEMU
|
||||
uses: docker/setup-qemu-action@v3
|
||||
|
||||
- name: Docker setup
|
||||
uses: docker/setup-buildx-action@v3
|
||||
|
||||
- name: Sanitize platform string
|
||||
id: sanitize_platform
|
||||
# Replace slashes with underscores
|
||||
run: echo "cleaned_platform=${{ inputs.platform }}" | sed 's/\//_/g' >> $GITHUB_OUTPUT
|
||||
|
||||
- name: Docker tag
|
||||
id: meta
|
||||
uses: docker/metadata-action@v6
|
||||
uses: docker/metadata-action@v5
|
||||
with:
|
||||
images: meshtastic/meshtasticd
|
||||
tags: |
|
||||
@@ -94,7 +81,7 @@ jobs:
|
||||
flavor: latest=false
|
||||
|
||||
- name: Docker build and push
|
||||
uses: docker/build-push-action@v7
|
||||
uses: docker/build-push-action@v6
|
||||
id: docker_variant
|
||||
with:
|
||||
context: .
|
||||
@@ -103,8 +90,3 @@ jobs:
|
||||
push: ${{ inputs.push }}
|
||||
tags: ${{ steps.meta.outputs.tags }} # Tag is only meant to be consumed by the "manifest" job
|
||||
platforms: ${{ inputs.platform }}
|
||||
build-args: |
|
||||
PIO_ENV=${{ inputs.pio_env }}
|
||||
# Cache image layers in GitHub Actions cache to speed up subsequent builds.
|
||||
cache-from: type=gha
|
||||
cache-to: type=gha,mode=max
|
||||
|
||||
@@ -12,7 +12,7 @@ on:
|
||||
type: string
|
||||
|
||||
permissions:
|
||||
contents: read
|
||||
contents: write
|
||||
packages: write
|
||||
|
||||
jobs:
|
||||
@@ -43,15 +43,6 @@ jobs:
|
||||
push: true
|
||||
secrets: inherit
|
||||
|
||||
docker-debian-riscv64:
|
||||
uses: ./.github/workflows/docker_build.yml
|
||||
with:
|
||||
distro: debian
|
||||
platform: linux/riscv64
|
||||
runs-on: ubuntu-24.04-arm
|
||||
push: true
|
||||
secrets: inherit
|
||||
|
||||
docker-alpine-amd64:
|
||||
uses: ./.github/workflows/docker_build.yml
|
||||
with:
|
||||
@@ -79,33 +70,24 @@ jobs:
|
||||
push: true
|
||||
secrets: inherit
|
||||
|
||||
docker-alpine-riscv64:
|
||||
uses: ./.github/workflows/docker_build.yml
|
||||
with:
|
||||
distro: alpine
|
||||
platform: linux/riscv64
|
||||
runs-on: ubuntu-24.04-arm
|
||||
push: true
|
||||
secrets: inherit
|
||||
|
||||
docker-manifest:
|
||||
needs:
|
||||
# Debian
|
||||
- docker-debian-amd64
|
||||
- docker-debian-arm64
|
||||
- docker-debian-armv7
|
||||
- docker-debian-riscv64
|
||||
# Alpine
|
||||
- docker-alpine-amd64
|
||||
- docker-alpine-arm64
|
||||
- docker-alpine-armv7
|
||||
- docker-alpine-riscv64
|
||||
runs-on: ubuntu-24.04
|
||||
steps:
|
||||
- name: Checkout code
|
||||
uses: actions/checkout@v6
|
||||
uses: actions/checkout@v4
|
||||
with:
|
||||
submodules: recursive
|
||||
ref: ${{github.event.pull_request.head.ref}}
|
||||
repository: ${{github.event.pull_request.head.repo.full_name}}
|
||||
|
||||
- name: Get release version string
|
||||
run: |
|
||||
@@ -157,14 +139,14 @@ jobs:
|
||||
id: tags
|
||||
|
||||
- name: Docker login
|
||||
uses: docker/login-action@v4
|
||||
uses: docker/login-action@v3
|
||||
with:
|
||||
username: meshtastic
|
||||
password: ${{ secrets.DOCKER_FIRMWARE_TOKEN }}
|
||||
|
||||
- name: Docker meta (Debian)
|
||||
id: meta_debian
|
||||
uses: docker/metadata-action@v6
|
||||
uses: docker/metadata-action@v5
|
||||
with:
|
||||
images: meshtastic/meshtasticd
|
||||
tags: |
|
||||
@@ -182,11 +164,10 @@ jobs:
|
||||
meshtastic/meshtasticd@${{ needs.docker-debian-amd64.outputs.digest }}
|
||||
meshtastic/meshtasticd@${{ needs.docker-debian-arm64.outputs.digest }}
|
||||
meshtastic/meshtasticd@${{ needs.docker-debian-armv7.outputs.digest }}
|
||||
meshtastic/meshtasticd@${{ needs.docker-debian-riscv64.outputs.digest }}
|
||||
|
||||
- name: Docker meta (Alpine)
|
||||
id: meta_alpine
|
||||
uses: docker/metadata-action@v6
|
||||
uses: docker/metadata-action@v5
|
||||
with:
|
||||
images: meshtastic/meshtasticd
|
||||
tags: |
|
||||
@@ -203,4 +184,3 @@ jobs:
|
||||
meshtastic/meshtasticd@${{ needs.docker-alpine-amd64.outputs.digest }}
|
||||
meshtastic/meshtasticd@${{ needs.docker-alpine-arm64.outputs.digest }}
|
||||
meshtastic/meshtasticd@${{ needs.docker-alpine-armv7.outputs.digest }}
|
||||
meshtastic/meshtasticd@${{ needs.docker-alpine-riscv64.outputs.digest }}
|
||||
|
||||
@@ -1,47 +0,0 @@
|
||||
name: Welcome First-Time Contributor
|
||||
|
||||
on:
|
||||
issues:
|
||||
types: opened
|
||||
pull_request_target:
|
||||
types: opened
|
||||
|
||||
permissions: {}
|
||||
|
||||
jobs:
|
||||
welcome:
|
||||
runs-on: ubuntu-latest
|
||||
permissions:
|
||||
issues: write # Required to post comments and labels on issues
|
||||
pull-requests: write # Required to post comments and labels on PRs
|
||||
steps:
|
||||
- uses: plbstl/first-contribution@v4
|
||||
with:
|
||||
labels: first-contribution
|
||||
issue-opened-msg: |
|
||||
### @{fc-author}, Welcome to Meshtastic! :wave:
|
||||
|
||||
Thanks for opening your first issue. If it's helpful, an easy way
|
||||
to get logs is the "Open Serial Monitor" button on the [Web Flasher](https://flasher.meshtastic.org).
|
||||
|
||||
If you have ideas for features, note that we often debate big ideas
|
||||
in the [discussions tab](https://github.com/meshtastic/firmware/discussions/categories/ideas)
|
||||
first. This tracker tends to be for ideas that have community
|
||||
consensus and a clear implementation.
|
||||
|
||||
We're very active [on discord](https://discord.com/invite/meshtastic),
|
||||
especially the \#firmware and \#alphanauts-testing channels. If you'll
|
||||
be around for a while, we'd love to see you there!
|
||||
|
||||
Welcome to the community! :heart:
|
||||
|
||||
pr-opened-msg: |
|
||||
### @{fc-author}, Welcome to Meshtastic!
|
||||
|
||||
Thanks for opening your first pull request. We really appreciate it.
|
||||
|
||||
We discuss work as a team in discord, please join us in the [#firmware channel](https://discord.com/invite/meshtastic).
|
||||
There's a big backlog of patches at the moment. If you have time,
|
||||
please help us with some code review and testing of [other PRs](https://github.com/meshtastic/firmware/pulls)!
|
||||
|
||||
Welcome to the team :smile:
|
||||
@@ -0,0 +1,35 @@
|
||||
name: Generate UsersPrefs JSON manifest
|
||||
|
||||
on:
|
||||
push:
|
||||
paths:
|
||||
- userPrefs.h
|
||||
branches:
|
||||
- master
|
||||
|
||||
jobs:
|
||||
generate-userprefs:
|
||||
runs-on: ubuntu-latest
|
||||
steps:
|
||||
- name: Checkout code
|
||||
uses: actions/checkout@v4
|
||||
|
||||
- name: Install Clang
|
||||
run: sudo apt-get install -y clang
|
||||
|
||||
- name: Install trunk
|
||||
run: curl https://get.trunk.io -fsSL | bash
|
||||
|
||||
- name: Generate userPrefs.jsom
|
||||
run: python3 ./bin/build-userprefs-json.py
|
||||
|
||||
- name: Trunk format json
|
||||
run: trunk format userPrefs.json
|
||||
|
||||
- name: Commit userPrefs.json
|
||||
run: |
|
||||
git config --global user.email "actions@github.com"
|
||||
git config --global user.name "GitHub Actions"
|
||||
git add userPrefs.json
|
||||
git commit -m "Update userPrefs.json"
|
||||
git push
|
||||
@@ -11,16 +11,19 @@ on:
|
||||
type: string
|
||||
|
||||
permissions:
|
||||
contents: read
|
||||
contents: write
|
||||
packages: write
|
||||
|
||||
jobs:
|
||||
build-copr-hook:
|
||||
runs-on: ubuntu-24.04
|
||||
steps:
|
||||
- name: Checkout code
|
||||
uses: actions/checkout@v6
|
||||
uses: actions/checkout@v4
|
||||
with:
|
||||
submodules: recursive
|
||||
ref: ${{ github.ref }}
|
||||
repository: ${{ github.repository }}
|
||||
|
||||
- name: Trigger COPR build
|
||||
uses: vidplace7/copr-build@main
|
||||
|
||||
+258
-334
@@ -3,195 +3,220 @@ concurrency:
|
||||
group: ci-${{ github.head_ref || github.run_id }}
|
||||
cancel-in-progress: true
|
||||
on:
|
||||
# # Triggers the workflow on push but only for the main branches
|
||||
# # Triggers the workflow on push but only for the master branch
|
||||
push:
|
||||
branches:
|
||||
- master
|
||||
- develop
|
||||
- pioarduino # Remove when merged // use `feature/` in the future.
|
||||
- event/*
|
||||
- feature/*
|
||||
branches: [master, develop]
|
||||
paths-ignore:
|
||||
- "**.md"
|
||||
- version.properties
|
||||
|
||||
pull_request:
|
||||
branches:
|
||||
- master
|
||||
- develop
|
||||
- pioarduino # Remove when merged // use `feature/` in the future.
|
||||
- event/*
|
||||
- feature/*
|
||||
# Note: This is different from "pull_request". Need to specify ref when doing checkouts.
|
||||
pull_request_target:
|
||||
branches: [master, develop]
|
||||
paths-ignore:
|
||||
- "**.md"
|
||||
#- "**.yml"
|
||||
|
||||
workflow_dispatch:
|
||||
|
||||
permissions: read-all
|
||||
|
||||
jobs:
|
||||
setup:
|
||||
strategy:
|
||||
fail-fast: true
|
||||
fail-fast: false
|
||||
matrix:
|
||||
arch:
|
||||
- all
|
||||
- check
|
||||
runs-on: ubuntu-24.04
|
||||
steps:
|
||||
- uses: actions/checkout@v6
|
||||
- uses: actions/setup-python@v6
|
||||
with:
|
||||
python-version: 3.x
|
||||
cache: pip
|
||||
- run: pip install -U platformio
|
||||
- name: Generate matrix
|
||||
id: jsonStep
|
||||
run: |
|
||||
if [[ "$GITHUB_HEAD_REF" == "" ]]; then
|
||||
TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
|
||||
else
|
||||
TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} --level pr)
|
||||
fi
|
||||
echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF"
|
||||
echo "${{matrix.arch}}=$TARGETS" >> $GITHUB_OUTPUT
|
||||
echo "$TARGETS" >> $GITHUB_STEP_SUMMARY
|
||||
outputs:
|
||||
all: ${{ steps.jsonStep.outputs.all }}
|
||||
check: ${{ steps.jsonStep.outputs.check }}
|
||||
|
||||
version:
|
||||
arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32, check]
|
||||
runs-on: ubuntu-latest
|
||||
steps:
|
||||
- uses: actions/checkout@v6
|
||||
- name: Get release version string
|
||||
- id: checkout
|
||||
uses: actions/checkout@v4
|
||||
name: Checkout base
|
||||
- id: jsonStep
|
||||
run: |
|
||||
echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
|
||||
echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
|
||||
id: version
|
||||
env:
|
||||
BUILD_LOCATION: local
|
||||
if [[ "${{ github.head_ref }}" == "" ]]; then
|
||||
TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
|
||||
else
|
||||
TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} quick)
|
||||
fi
|
||||
echo "Name: ${{ github.ref_name }} Base: ${{ github.base_ref }} } Ref: ${{ github.ref }} Targets: $TARGETS"
|
||||
echo "${{matrix.arch}}=$(jq -cn --argjson environments "$TARGETS" '{board: $environments}')" >> $GITHUB_OUTPUT
|
||||
outputs:
|
||||
long: ${{ steps.version.outputs.long }}
|
||||
deb: ${{ steps.version.outputs.deb }}
|
||||
esp32: ${{ steps.jsonStep.outputs.esp32 }}
|
||||
esp32s3: ${{ steps.jsonStep.outputs.esp32s3 }}
|
||||
esp32c3: ${{ steps.jsonStep.outputs.esp32c3 }}
|
||||
esp32c6: ${{ steps.jsonStep.outputs.esp32c6 }}
|
||||
nrf52840: ${{ steps.jsonStep.outputs.nrf52840 }}
|
||||
rp2040: ${{ steps.jsonStep.outputs.rp2040 }}
|
||||
stm32: ${{ steps.jsonStep.outputs.stm32 }}
|
||||
check: ${{ steps.jsonStep.outputs.check }}
|
||||
|
||||
check:
|
||||
needs: setup
|
||||
strategy:
|
||||
fail-fast: false
|
||||
matrix:
|
||||
check: ${{ fromJson(needs.setup.outputs.check) }}
|
||||
# Use 'arctastic' self-hosted runner pool when checking in the main repo
|
||||
runs-on: ${{ github.repository_owner == 'meshtastic' && 'arctastic' || 'ubuntu-latest' }}
|
||||
if: ${{ github.event_name != 'workflow_dispatch' && github.repository == 'meshtastic/firmware' }}
|
||||
steps:
|
||||
- uses: actions/checkout@v6
|
||||
with:
|
||||
submodules: recursive
|
||||
- name: Check ${{ matrix.check.board }}
|
||||
uses: meshtastic/gh-action-firmware@main
|
||||
with:
|
||||
pio_platform: ${{ matrix.check.platform }}
|
||||
pio_env: ${{ matrix.check.board }}
|
||||
pio_target: check
|
||||
matrix: ${{ fromJson(needs.setup.outputs.check) }}
|
||||
|
||||
build:
|
||||
needs: [setup, version]
|
||||
runs-on: ubuntu-latest
|
||||
if: ${{ github.event_name != 'workflow_dispatch' }}
|
||||
steps:
|
||||
- uses: actions/checkout@v4
|
||||
- name: Build base
|
||||
id: base
|
||||
uses: ./.github/actions/setup-base
|
||||
- name: Check ${{ matrix.board }}
|
||||
run: bin/check-all.sh ${{ matrix.board }}
|
||||
|
||||
build-esp32:
|
||||
needs: setup
|
||||
strategy:
|
||||
fail-fast: false
|
||||
matrix:
|
||||
build: ${{ fromJson(needs.setup.outputs.all) }}
|
||||
uses: ./.github/workflows/build_firmware.yml
|
||||
matrix: ${{ fromJson(needs.setup.outputs.esp32) }}
|
||||
uses: ./.github/workflows/build_esp32.yml
|
||||
with:
|
||||
version: ${{ needs.version.outputs.long }}
|
||||
pio_env: ${{ matrix.build.board }}
|
||||
platform: ${{ matrix.build.platform }}
|
||||
board: ${{ matrix.board }}
|
||||
|
||||
build-esp32-s3:
|
||||
needs: setup
|
||||
strategy:
|
||||
fail-fast: false
|
||||
matrix: ${{ fromJson(needs.setup.outputs.esp32s3) }}
|
||||
uses: ./.github/workflows/build_esp32_s3.yml
|
||||
with:
|
||||
board: ${{ matrix.board }}
|
||||
|
||||
build-esp32-c3:
|
||||
needs: setup
|
||||
strategy:
|
||||
fail-fast: false
|
||||
matrix: ${{ fromJson(needs.setup.outputs.esp32c3) }}
|
||||
uses: ./.github/workflows/build_esp32_c3.yml
|
||||
with:
|
||||
board: ${{ matrix.board }}
|
||||
|
||||
build-esp32-c6:
|
||||
needs: setup
|
||||
strategy:
|
||||
fail-fast: false
|
||||
matrix: ${{ fromJson(needs.setup.outputs.esp32c6) }}
|
||||
uses: ./.github/workflows/build_esp32_c6.yml
|
||||
with:
|
||||
board: ${{ matrix.board }}
|
||||
|
||||
build-nrf52:
|
||||
needs: setup
|
||||
strategy:
|
||||
fail-fast: false
|
||||
matrix: ${{ fromJson(needs.setup.outputs.nrf52840) }}
|
||||
uses: ./.github/workflows/build_nrf52.yml
|
||||
with:
|
||||
board: ${{ matrix.board }}
|
||||
|
||||
build-rpi2040:
|
||||
needs: setup
|
||||
strategy:
|
||||
fail-fast: false
|
||||
matrix: ${{ fromJson(needs.setup.outputs.rp2040) }}
|
||||
uses: ./.github/workflows/build_rpi2040.yml
|
||||
with:
|
||||
board: ${{ matrix.board }}
|
||||
|
||||
build-stm32:
|
||||
needs: setup
|
||||
strategy:
|
||||
fail-fast: false
|
||||
matrix: ${{ fromJson(needs.setup.outputs.stm32) }}
|
||||
uses: ./.github/workflows/build_stm32.yml
|
||||
with:
|
||||
board: ${{ matrix.board }}
|
||||
|
||||
package-raspbian:
|
||||
uses: ./.github/workflows/package_raspbian.yml
|
||||
|
||||
package-raspbian-armv7l:
|
||||
uses: ./.github/workflows/package_raspbian_armv7l.yml
|
||||
|
||||
package-native:
|
||||
uses: ./.github/workflows/package_amd64.yml
|
||||
|
||||
build-debian-src:
|
||||
if: github.repository == 'meshtastic/firmware'
|
||||
uses: ./.github/workflows/build_debian_src.yml
|
||||
with:
|
||||
series: UNRELEASED
|
||||
build_location: local
|
||||
secrets: inherit
|
||||
|
||||
MacOS:
|
||||
strategy:
|
||||
fail-fast: false
|
||||
matrix:
|
||||
macos_ver:
|
||||
- "26" # ARM64
|
||||
# - '26-intel' # x86_64
|
||||
- "15" # ARM64
|
||||
# - '15-intel' # x86_64
|
||||
uses: ./.github/workflows/build_macos_bin.yml
|
||||
with:
|
||||
macos_ver: ${{ matrix.macos_ver }}
|
||||
# secrets: inherit
|
||||
|
||||
package-pio-deps-native-tft:
|
||||
if: ${{ github.repository == 'meshtastic/firmware' && github.event_name == 'workflow_dispatch' }}
|
||||
uses: ./.github/workflows/package_pio_deps.yml
|
||||
with:
|
||||
pio_env: native-tft
|
||||
secrets: inherit
|
||||
|
||||
test-native:
|
||||
if: ${{ !contains(github.ref_name, 'event/') && github.repository == 'meshtastic/firmware' }}
|
||||
permissions: # Needed for dorny/test-reporter.
|
||||
contents: read
|
||||
actions: read
|
||||
checks: write
|
||||
uses: ./.github/workflows/test_native.yml
|
||||
|
||||
docker:
|
||||
permissions: # Needed for pushing to GHCR.
|
||||
contents: read
|
||||
packages: write
|
||||
strategy:
|
||||
fail-fast: false
|
||||
matrix:
|
||||
distro: [debian, alpine]
|
||||
platform: [linux/amd64, linux/arm64, linux/arm/v7]
|
||||
pio_env: [native, native-tft]
|
||||
exclude:
|
||||
- distro: alpine
|
||||
platform: linux/arm/v7
|
||||
- pio_env: native-tft
|
||||
platform: linux/arm64
|
||||
- pio_env: native-tft
|
||||
platform: linux/arm/v7
|
||||
docker-debian-amd64:
|
||||
uses: ./.github/workflows/docker_build.yml
|
||||
with:
|
||||
distro: ${{ matrix.distro }}
|
||||
platform: ${{ matrix.platform }}
|
||||
runs-on: ${{ contains(matrix.platform, 'arm') && 'ubuntu-24.04-arm' || 'ubuntu-24.04' }}
|
||||
pio_env: ${{ matrix.pio_env }}
|
||||
distro: debian
|
||||
platform: linux/amd64
|
||||
runs-on: ubuntu-24.04
|
||||
push: false
|
||||
|
||||
docker-alpine-amd64:
|
||||
uses: ./.github/workflows/docker_build.yml
|
||||
with:
|
||||
distro: debian
|
||||
platform: linux/amd64
|
||||
runs-on: ubuntu-24.04
|
||||
push: false
|
||||
|
||||
docker-debian-arm64:
|
||||
uses: ./.github/workflows/docker_build.yml
|
||||
with:
|
||||
distro: debian
|
||||
platform: linux/arm64
|
||||
runs-on: ubuntu-24.04-arm
|
||||
push: false
|
||||
|
||||
docker-debian-armv7:
|
||||
uses: ./.github/workflows/docker_build.yml
|
||||
with:
|
||||
distro: debian
|
||||
platform: linux/arm/v7
|
||||
runs-on: ubuntu-24.04-arm
|
||||
push: false
|
||||
|
||||
after-checks:
|
||||
runs-on: ubuntu-latest
|
||||
if: ${{ github.event_name != 'workflow_dispatch' }}
|
||||
needs: [check]
|
||||
steps:
|
||||
- name: Checkout code
|
||||
uses: actions/checkout@v4
|
||||
with:
|
||||
ref: ${{github.event.pull_request.head.ref}}
|
||||
repository: ${{github.event.pull_request.head.repo.full_name}}
|
||||
|
||||
gather-artifacts:
|
||||
# trunk-ignore(checkov/CKV2_GHA_1)
|
||||
if: github.repository == 'meshtastic/firmware'
|
||||
permissions:
|
||||
contents: write
|
||||
pull-requests: write
|
||||
strategy:
|
||||
fail-fast: false
|
||||
matrix:
|
||||
arch:
|
||||
- esp32
|
||||
- esp32s3
|
||||
- esp32c3
|
||||
- esp32c6
|
||||
- nrf52840
|
||||
- rp2040
|
||||
- rp2350
|
||||
- stm32
|
||||
arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32]
|
||||
runs-on: ubuntu-latest
|
||||
needs: [version, build]
|
||||
needs:
|
||||
[
|
||||
build-esp32,
|
||||
build-esp32-s3,
|
||||
build-esp32-c3,
|
||||
build-esp32-c6,
|
||||
build-nrf52,
|
||||
build-rpi2040,
|
||||
build-stm32,
|
||||
]
|
||||
steps:
|
||||
- name: Checkout code
|
||||
uses: actions/checkout@v6
|
||||
uses: actions/checkout@v4
|
||||
with:
|
||||
ref: ${{github.event.pull_request.head.ref}}
|
||||
repository: ${{github.event.pull_request.head.repo.full_name}}
|
||||
|
||||
- uses: actions/download-artifact@v8
|
||||
- uses: actions/download-artifact@v4
|
||||
with:
|
||||
path: ./
|
||||
pattern: firmware-${{matrix.arch}}-*
|
||||
@@ -200,28 +225,34 @@ jobs:
|
||||
- name: Display structure of downloaded files
|
||||
run: ls -R
|
||||
|
||||
- name: Get release version string
|
||||
run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
|
||||
id: version
|
||||
|
||||
- name: Move files up
|
||||
run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
|
||||
|
||||
- name: Repackage in single firmware zip
|
||||
uses: actions/upload-artifact@v7
|
||||
uses: actions/upload-artifact@v4
|
||||
with:
|
||||
name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
|
||||
name: firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}
|
||||
overwrite: true
|
||||
path: |
|
||||
./firmware-*.mt.json
|
||||
./firmware-*.bin
|
||||
./firmware-*.uf2
|
||||
./firmware-*.hex
|
||||
./firmware-*.zip
|
||||
./firmware-*-ota.zip
|
||||
./device-*.sh
|
||||
./device-*.bat
|
||||
./littlefs-*.bin
|
||||
./littlefswebui-*.bin
|
||||
./bleota*bin
|
||||
./mt-*-ota.bin
|
||||
./Meshtastic_nRF52_factory_erase*.uf2
|
||||
retention-days: 30
|
||||
|
||||
- uses: actions/download-artifact@v8
|
||||
- uses: actions/download-artifact@v4
|
||||
with:
|
||||
name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
|
||||
name: firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}
|
||||
merge-multiple: true
|
||||
path: ./output
|
||||
|
||||
@@ -231,189 +262,139 @@ jobs:
|
||||
|
||||
- name: Device scripts permissions
|
||||
run: |
|
||||
chmod +x ./output/device-install.sh || true
|
||||
chmod +x ./output/device-update.sh || true
|
||||
chmod +x ./output/device-install.sh
|
||||
chmod +x ./output/device-update.sh
|
||||
|
||||
- name: Zip firmware
|
||||
run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
|
||||
run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip ./output
|
||||
|
||||
- name: Repackage in single elfs zip
|
||||
uses: actions/upload-artifact@v7
|
||||
uses: actions/upload-artifact@v4
|
||||
with:
|
||||
name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
|
||||
name: debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
|
||||
overwrite: true
|
||||
path: ./*.elf
|
||||
retention-days: 30
|
||||
|
||||
shame:
|
||||
if: github.repository == 'meshtastic/firmware'
|
||||
continue-on-error: true
|
||||
runs-on: ubuntu-latest
|
||||
needs: [build]
|
||||
steps:
|
||||
- uses: actions/checkout@v6
|
||||
if: github.event_name == 'pull_request'
|
||||
- uses: scruplelesswizard/comment-artifact@main
|
||||
if: ${{ github.event_name == 'pull_request' }}
|
||||
with:
|
||||
filter: blob:none # means we download all the git history but none of the commit (except ones with checkout like the head)
|
||||
fetch-depth: 0
|
||||
- name: Download the current manifests
|
||||
uses: actions/download-artifact@v8
|
||||
with:
|
||||
path: ./manifests-new/
|
||||
pattern: manifest-*
|
||||
merge-multiple: true
|
||||
- name: Upload combined manifests for later commit and global stats crunching.
|
||||
uses: actions/upload-artifact@v7
|
||||
id: upload-manifest
|
||||
with:
|
||||
name: manifests-${{ github.sha }}
|
||||
overwrite: true
|
||||
path: manifests-new/*.mt.json
|
||||
- name: Find the merge base
|
||||
if: github.event_name == 'pull_request'
|
||||
run: echo "MERGE_BASE=$(git merge-base "origin/$base" "$head")" >> $GITHUB_ENV
|
||||
env:
|
||||
base: ${{ github.base_ref }}
|
||||
head: ${{ github.sha }}
|
||||
# Currently broken (for-loop through EVERY artifact -- rate limiting)
|
||||
# - name: Download the old manifests
|
||||
# if: github.event_name == 'pull_request'
|
||||
# run: gh run download -R "$repo" --name "manifests-$merge_base" --dir manifest-old/
|
||||
# env:
|
||||
# GH_TOKEN: ${{ github.token }}
|
||||
# merge_base: ${{ env.MERGE_BASE }}
|
||||
# repo: ${{ github.repository }}
|
||||
# - name: Do scan and post comment
|
||||
# if: github.event_name == 'pull_request'
|
||||
# run: python3 bin/shame.py ${{ github.event.pull_request.number }} manifests-old/ manifests-new/
|
||||
name: firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}
|
||||
description: "Download firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
|
||||
github-token: ${{ secrets.GITHUB_TOKEN }}
|
||||
|
||||
release-artifacts:
|
||||
permissions: # Needed for 'gh release upload'.
|
||||
contents: write
|
||||
runs-on: ubuntu-latest
|
||||
if: ${{ github.event_name == 'workflow_dispatch' && github.repository == 'meshtastic/firmware' }}
|
||||
if: ${{ github.event_name == 'workflow_dispatch' }}
|
||||
outputs:
|
||||
upload_url: ${{ steps.create_release.outputs.upload_url }}
|
||||
needs:
|
||||
- setup
|
||||
- version
|
||||
- gather-artifacts
|
||||
- build-debian-src
|
||||
- package-pio-deps-native-tft
|
||||
# - MacOS
|
||||
[
|
||||
gather-artifacts,
|
||||
package-raspbian,
|
||||
package-raspbian-armv7l,
|
||||
package-native,
|
||||
build-debian-src,
|
||||
]
|
||||
steps:
|
||||
- name: Checkout
|
||||
uses: actions/checkout@v6
|
||||
with:
|
||||
fetch-depth: 0
|
||||
uses: actions/checkout@v4
|
||||
|
||||
- name: Setup Python
|
||||
uses: actions/setup-python@v6
|
||||
uses: actions/setup-python@v5
|
||||
with:
|
||||
python-version: 3.x
|
||||
|
||||
- name: Generate release notes
|
||||
id: release_notes
|
||||
- name: Get release version string
|
||||
run: |
|
||||
chmod +x ./bin/generate_release_notes.py
|
||||
NOTES=$(./bin/generate_release_notes.py ${{ needs.version.outputs.long }} --compare-ref HEAD 2>release_notes.log)
|
||||
echo "notes<<EOF" >> $GITHUB_OUTPUT
|
||||
echo "$NOTES" >> $GITHUB_OUTPUT
|
||||
echo "EOF" >> $GITHUB_OUTPUT
|
||||
echo "### Release note range" >> $GITHUB_STEP_SUMMARY
|
||||
cat release_notes.log >> $GITHUB_STEP_SUMMARY
|
||||
echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
|
||||
echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
|
||||
id: version
|
||||
env:
|
||||
GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
|
||||
BUILD_LOCATION: local
|
||||
|
||||
- name: Create release
|
||||
uses: softprops/action-gh-release@v3
|
||||
uses: softprops/action-gh-release@v2
|
||||
id: create_release
|
||||
with:
|
||||
draft: true
|
||||
prerelease: true
|
||||
name: Meshtastic Firmware ${{ needs.version.outputs.long }} Alpha
|
||||
tag_name: v${{ needs.version.outputs.long }}
|
||||
target_commitish: ${{ github.sha }}
|
||||
body: ${{ steps.release_notes.outputs.notes }}
|
||||
name: Meshtastic Firmware ${{ steps.version.outputs.long }} Alpha
|
||||
tag_name: v${{ steps.version.outputs.long }}
|
||||
body: |
|
||||
Autogenerated by github action, developer should edit as required before publishing...
|
||||
|
||||
- name: Download deb files
|
||||
uses: actions/download-artifact@v4
|
||||
with:
|
||||
pattern: meshtasticd_${{ steps.version.outputs.long }}_*.deb
|
||||
merge-multiple: true
|
||||
path: ./output
|
||||
|
||||
- name: Download source deb
|
||||
uses: actions/download-artifact@v8
|
||||
uses: actions/download-artifact@v4
|
||||
with:
|
||||
pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
|
||||
pattern: firmware-debian-${{ steps.version.outputs.deb }}~UNRELEASED-src
|
||||
merge-multiple: true
|
||||
path: ./output/debian-src
|
||||
|
||||
- name: Download `native-tft` pio deps
|
||||
uses: actions/download-artifact@v8
|
||||
with:
|
||||
pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
|
||||
merge-multiple: true
|
||||
path: ./output/pio-deps-native-tft
|
||||
|
||||
- name: Zip Linux sources
|
||||
- name: Zip source deb
|
||||
working-directory: output
|
||||
run: |
|
||||
zip -j -9 -r ./meshtasticd-${{ needs.version.outputs.deb }}-src.zip ./debian-src
|
||||
zip -9 -r ./platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip ./pio-deps-native-tft
|
||||
run: zip -j -9 -r ./meshtasticd-${{ steps.version.outputs.deb }}-src.zip ./debian-src
|
||||
|
||||
# For diagnostics
|
||||
- name: Display structure of downloaded files
|
||||
run: ls -lR
|
||||
|
||||
- name: Generate Release manifest
|
||||
- name: Add deb files to release
|
||||
run: |
|
||||
jq -n --arg ver "${{ needs.version.outputs.long }}" --argjson targets ${{ toJson(needs.setup.outputs.all) }} '{
|
||||
"version": $ver,
|
||||
"targets": $targets
|
||||
}' > firmware-${{ needs.version.outputs.long }}.json
|
||||
|
||||
- name: Save Release manifest artifact
|
||||
uses: actions/upload-artifact@v7
|
||||
with:
|
||||
name: manifest-${{ needs.version.outputs.long }}
|
||||
overwrite: true
|
||||
path: firmware-${{ needs.version.outputs.long }}.json
|
||||
|
||||
- name: Add sources to GitHub Release
|
||||
# Only run when targeting master branch with workflow_dispatch
|
||||
if: ${{ github.ref_name == 'master' }}
|
||||
run: |
|
||||
gh release upload v${{ needs.version.outputs.long }} ./firmware-${{ needs.version.outputs.long }}.json
|
||||
gh release upload v${{ needs.version.outputs.long }} ./output/meshtasticd-${{ needs.version.outputs.deb }}-src.zip
|
||||
gh release upload v${{ needs.version.outputs.long }} ./output/platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip
|
||||
gh release upload v${{ steps.version.outputs.long }} ./output/meshtasticd_${{ steps.version.outputs.long }}_arm64.deb
|
||||
gh release upload v${{ steps.version.outputs.long }} ./output/meshtasticd_${{ steps.version.outputs.long }}_armhf.deb
|
||||
gh release upload v${{ steps.version.outputs.long }} ./output/meshtasticd_${{ steps.version.outputs.long }}_amd64.deb
|
||||
gh release upload v${{ steps.version.outputs.long }} ./output/meshtasticd-${{ steps.version.outputs.deb }}-src.zip
|
||||
env:
|
||||
GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
|
||||
|
||||
- name: Bump version.properties
|
||||
run: >-
|
||||
bin/bump_version.py
|
||||
|
||||
- name: Update debian changelog
|
||||
run: >-
|
||||
debian/ci_changelog.sh
|
||||
|
||||
- name: Create version.properties pull request
|
||||
uses: peter-evans/create-pull-request@v7
|
||||
with:
|
||||
title: Bump version.properties
|
||||
add-paths: |
|
||||
version.properties
|
||||
debian/changelog
|
||||
|
||||
release-firmware:
|
||||
permissions: # Needed for 'gh release upload'.
|
||||
contents: write
|
||||
strategy:
|
||||
fail-fast: false
|
||||
matrix:
|
||||
arch:
|
||||
- esp32
|
||||
- esp32s3
|
||||
- esp32c3
|
||||
- esp32c6
|
||||
- nrf52840
|
||||
- rp2040
|
||||
- rp2350
|
||||
- stm32
|
||||
arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32]
|
||||
runs-on: ubuntu-latest
|
||||
if: ${{ github.event_name == 'workflow_dispatch' && github.repository == 'meshtastic/firmware'}}
|
||||
needs: [release-artifacts, version]
|
||||
if: ${{ github.event_name == 'workflow_dispatch' }}
|
||||
needs: [release-artifacts]
|
||||
steps:
|
||||
- name: Checkout
|
||||
uses: actions/checkout@v6
|
||||
uses: actions/checkout@v4
|
||||
|
||||
- name: Setup Python
|
||||
uses: actions/setup-python@v6
|
||||
uses: actions/setup-python@v5
|
||||
with:
|
||||
python-version: 3.x
|
||||
|
||||
- uses: actions/download-artifact@v8
|
||||
- name: Get release version string
|
||||
run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
|
||||
id: version
|
||||
|
||||
- uses: actions/download-artifact@v4
|
||||
with:
|
||||
pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
|
||||
pattern: firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}
|
||||
merge-multiple: true
|
||||
path: ./output
|
||||
|
||||
@@ -422,85 +403,28 @@ jobs:
|
||||
|
||||
- name: Device scripts permissions
|
||||
run: |
|
||||
chmod +x ./output/device-install.sh || true
|
||||
chmod +x ./output/device-update.sh || true
|
||||
chmod +x ./output/device-install.sh
|
||||
chmod +x ./output/device-update.sh
|
||||
|
||||
- name: Zip firmware
|
||||
run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
|
||||
run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip ./output
|
||||
|
||||
- uses: actions/download-artifact@v8
|
||||
- uses: actions/download-artifact@v4
|
||||
with:
|
||||
name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
|
||||
name: debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
|
||||
merge-multiple: true
|
||||
path: ./elfs
|
||||
|
||||
- name: Zip debug elfs
|
||||
run: zip -j -9 -r ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./elfs
|
||||
run: zip -j -9 -r ./debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip ./elfs
|
||||
|
||||
# For diagnostics
|
||||
- name: Display structure of downloaded files
|
||||
run: ls -lR
|
||||
|
||||
- name: Add bins and debug elfs to GitHub Release
|
||||
# Only run when targeting master branch with workflow_dispatch
|
||||
if: ${{ github.ref_name == 'master' }}
|
||||
- name: Add bins and debug elfs to release
|
||||
run: |
|
||||
gh release upload v${{ needs.version.outputs.long }} ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
|
||||
gh release upload v${{ needs.version.outputs.long }} ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
|
||||
gh release upload v${{ steps.version.outputs.long }} ./firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
|
||||
gh release upload v${{ steps.version.outputs.long }} ./debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
|
||||
env:
|
||||
GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
|
||||
|
||||
publish-firmware:
|
||||
runs-on: ubuntu-24.04
|
||||
if: ${{ github.event_name == 'workflow_dispatch' }}
|
||||
needs: [release-firmware, version]
|
||||
env:
|
||||
targets: |-
|
||||
esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
|
||||
steps:
|
||||
- name: Checkout
|
||||
uses: actions/checkout@v6
|
||||
with:
|
||||
fetch-depth: 0
|
||||
|
||||
- name: Setup Python
|
||||
uses: actions/setup-python@v6
|
||||
with:
|
||||
python-version: 3.x
|
||||
|
||||
- name: Get firmware artifacts
|
||||
uses: actions/download-artifact@v8
|
||||
with:
|
||||
pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
|
||||
merge-multiple: true
|
||||
path: ./publish
|
||||
|
||||
- name: Get manifest artifact
|
||||
uses: actions/download-artifact@v8
|
||||
with:
|
||||
pattern: manifest-${{ needs.version.outputs.long }}
|
||||
path: ./publish
|
||||
|
||||
- name: Generate release notes
|
||||
run: |
|
||||
chmod +x ./bin/generate_release_notes.py
|
||||
./bin/generate_release_notes.py ${{ needs.version.outputs.long }} --compare-ref HEAD > ./publish/release_notes.md
|
||||
env:
|
||||
GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
|
||||
|
||||
- name: Publish firmware to meshtastic.github.io
|
||||
uses: peaceiris/actions-gh-pages@v4
|
||||
env:
|
||||
# On event/* branches, use the event name as the destination prefix
|
||||
DEST_PREFIX: ${{ contains(github.ref_name, 'event/') && format('{0}/', github.ref_name) || '' }}
|
||||
with:
|
||||
deploy_key: ${{ secrets.DIST_PAGES_DEPLOY_KEY }}
|
||||
external_repository: meshtastic/meshtastic.github.io
|
||||
publish_branch: master
|
||||
publish_dir: ./publish
|
||||
destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ needs.version.outputs.long }}
|
||||
keep_files: true
|
||||
user_name: github-actions[bot]
|
||||
user_email: github-actions[bot]@users.noreply.github.com
|
||||
commit_message: ${{ needs.version.outputs.long }}
|
||||
enable_jekyll: true
|
||||
|
||||
@@ -1,213 +0,0 @@
|
||||
name: Issue Triage (Models)
|
||||
|
||||
on:
|
||||
issues:
|
||||
types: [opened]
|
||||
|
||||
permissions:
|
||||
issues: write
|
||||
models: read
|
||||
|
||||
concurrency:
|
||||
group: ${{ github.workflow }}-${{ github.event.issue.number }}
|
||||
cancel-in-progress: true
|
||||
|
||||
jobs:
|
||||
triage:
|
||||
if: ${{ github.repository == 'meshtastic/firmware' && github.event.issue.user.type != 'Bot' }}
|
||||
runs-on: ubuntu-latest
|
||||
steps:
|
||||
# ─────────────────────────────────────────────────────────────────────────
|
||||
# Step 1: Quality check (spam/AI-slop detection) - runs first, exits early if spam
|
||||
# ─────────────────────────────────────────────────────────────────────────
|
||||
- name: Detect spam or low-quality content
|
||||
uses: actions/ai-inference@v2
|
||||
id: quality
|
||||
continue-on-error: true
|
||||
with:
|
||||
max-tokens: 20
|
||||
prompt: |
|
||||
Is this GitHub issue spam, AI-generated slop, or low quality?
|
||||
|
||||
Title: ${{ github.event.issue.title }}
|
||||
Body: ${{ github.event.issue.body }}
|
||||
|
||||
Respond with exactly one of: spam, ai-generated, needs-review, ok
|
||||
system-prompt: You detect spam and low-quality contributions. Be conservative - only flag obvious spam or AI slop.
|
||||
model: openai/gpt-4o-mini
|
||||
|
||||
- name: Apply quality label if needed
|
||||
if: steps.quality.outputs.response != '' && steps.quality.outputs.response != 'ok'
|
||||
uses: actions/github-script@v9
|
||||
env:
|
||||
QUALITY_LABEL: ${{ steps.quality.outputs.response }}
|
||||
with:
|
||||
script: |
|
||||
const label = (process.env.QUALITY_LABEL || '').trim().toLowerCase();
|
||||
const labelMeta = {
|
||||
'spam': { color: 'd73a4a', description: 'Possible spam' },
|
||||
'ai-generated': { color: 'fbca04', description: 'Possible AI-generated low-quality content' },
|
||||
'needs-review': { color: 'f9d0c4', description: 'Needs human review' },
|
||||
};
|
||||
const meta = labelMeta[label];
|
||||
if (!meta) return;
|
||||
|
||||
// Ensure label exists
|
||||
try {
|
||||
await github.rest.issues.getLabel({ owner: context.repo.owner, repo: context.repo.repo, name: label });
|
||||
} catch (e) {
|
||||
if (e.status !== 404) throw e;
|
||||
await github.rest.issues.createLabel({ owner: context.repo.owner, repo: context.repo.repo, name: label, color: meta.color, description: meta.description });
|
||||
}
|
||||
|
||||
// Apply label
|
||||
await github.rest.issues.addLabels({ owner: context.repo.owner, repo: context.repo.repo, issue_number: context.payload.issue.number, labels: [label] });
|
||||
|
||||
// Set output to skip remaining steps
|
||||
core.setOutput('is_spam', 'true');
|
||||
|
||||
# ─────────────────────────────────────────────────────────────────────────
|
||||
# Step 2: Duplicate detection - only if not spam
|
||||
# ─────────────────────────────────────────────────────────────────────────
|
||||
- name: Detect duplicate issues
|
||||
if: steps.quality.outputs.response == 'ok' || steps.quality.outputs.response == ''
|
||||
uses: pelikhan/action-genai-issue-dedup@bdb3b5d9451c1090ffcdf123d7447a5e7c7a2528 # v0.0.19
|
||||
with:
|
||||
github_token: ${{ secrets.GITHUB_TOKEN }}
|
||||
|
||||
# ─────────────────────────────────────────────────────────────────────────
|
||||
# Step 3: Completeness check + auto-labeling (combined into one AI call)
|
||||
# ─────────────────────────────────────────────────────────────────────────
|
||||
- name: Determine if completeness check should be skipped
|
||||
if: steps.quality.outputs.response == 'ok' || steps.quality.outputs.response == ''
|
||||
uses: actions/github-script@v9
|
||||
id: check-skip
|
||||
with:
|
||||
script: |
|
||||
const title = (context.payload.issue.title || '').toLowerCase();
|
||||
const labels = (context.payload.issue.labels || []).map(label => label.name);
|
||||
const hasFeatureRequest = title.includes('feature request');
|
||||
const hasEnhancement = labels.includes('enhancement');
|
||||
const shouldSkip = hasFeatureRequest && hasEnhancement;
|
||||
core.setOutput('should_skip', shouldSkip ? 'true' : 'false');
|
||||
|
||||
- name: Analyze issue completeness and determine labels
|
||||
if: (steps.quality.outputs.response == 'ok' || steps.quality.outputs.response == '') && steps.check-skip.outputs.should_skip != 'true'
|
||||
uses: actions/ai-inference@v2
|
||||
id: analysis
|
||||
continue-on-error: true
|
||||
with:
|
||||
prompt: |
|
||||
Analyze this GitHub issue for completeness and determine if it needs labels.
|
||||
|
||||
IMPORTANT: Distinguish between:
|
||||
- Device/firmware bugs (crashes, reboots, lockups, radio/GPS/display/power issues) - these need device logs
|
||||
- Build/release/packaging issues (missing files, CI failures, download problems) - these do NOT need device logs
|
||||
- Documentation or website issues - these do NOT need device logs
|
||||
|
||||
If this is a device/firmware bug, request device logs and explain how to get them:
|
||||
|
||||
Web Flasher logs:
|
||||
- Go to https://flasher.meshtastic.org
|
||||
- Connect the device via USB and click Connect
|
||||
- Open the device console/log output, reproduce the problem, then copy/download and attach/paste the logs
|
||||
|
||||
Meshtastic CLI logs:
|
||||
- Run: meshtastic --port <serial-port> --noproto
|
||||
- Reproduce the problem, then copy/paste the terminal output
|
||||
|
||||
Also request key context if missing: device model/variant, firmware version, region, steps to reproduce, expected vs actual.
|
||||
|
||||
Respond ONLY with valid JSON (no markdown, no code fences):
|
||||
{"complete": true, "comment": "", "label": "none"}
|
||||
OR
|
||||
{"complete": false, "comment": "Your helpful comment", "label": "needs-logs"}
|
||||
|
||||
Use "needs-logs" ONLY if this is a device/firmware bug AND no logs are attached.
|
||||
Use "needs-info" if basic info like firmware version or steps to reproduce are missing.
|
||||
Use "none" if the issue is complete, is a feature request, or is a build/CI/packaging issue.
|
||||
|
||||
Title: ${{ github.event.issue.title }}
|
||||
Body: ${{ github.event.issue.body }}
|
||||
system-prompt: You are a helpful assistant that triages GitHub issues. Be conservative with labels. Only request device logs for actual device/firmware bugs, not for build/release/CI issues.
|
||||
model: openai/gpt-4o-mini
|
||||
|
||||
- name: Process analysis result
|
||||
if: (steps.quality.outputs.response == 'ok' || steps.quality.outputs.response == '') && steps.check-skip.outputs.should_skip != 'true' && steps.analysis.outputs.response != ''
|
||||
uses: actions/github-script@v9
|
||||
id: process
|
||||
env:
|
||||
AI_RESPONSE: ${{ steps.analysis.outputs.response }}
|
||||
with:
|
||||
script: |
|
||||
let raw = (process.env.AI_RESPONSE || '').trim();
|
||||
|
||||
// Strip markdown code fences if present
|
||||
raw = raw.replace(/^```(?:json)?\s*/i, '').replace(/\s*```$/i, '').trim();
|
||||
|
||||
let complete = true;
|
||||
let comment = '';
|
||||
let label = 'none';
|
||||
|
||||
try {
|
||||
const parsed = JSON.parse(raw);
|
||||
complete = !!parsed.complete;
|
||||
comment = (parsed.comment ?? '').toString().trim();
|
||||
label = (parsed.label ?? 'none').toString().trim().toLowerCase();
|
||||
} catch {
|
||||
// If JSON parse fails, log warning and don't comment (avoid posting raw JSON)
|
||||
console.log('Failed to parse AI response as JSON:', raw);
|
||||
complete = true;
|
||||
comment = '';
|
||||
label = 'none';
|
||||
}
|
||||
|
||||
// Validate label
|
||||
const allowedLabels = new Set(['needs-logs', 'needs-info', 'none']);
|
||||
if (!allowedLabels.has(label)) label = 'none';
|
||||
|
||||
// Only comment if we have a valid parsed comment (not raw JSON)
|
||||
const shouldComment = !complete && comment.length > 0 && !comment.startsWith('{');
|
||||
core.setOutput('should_comment', shouldComment ? 'true' : 'false');
|
||||
core.setOutput('comment_body', comment);
|
||||
core.setOutput('label', label);
|
||||
|
||||
- name: Apply triage label
|
||||
if: steps.process.outputs.label != '' && steps.process.outputs.label != 'none'
|
||||
uses: actions/github-script@v9
|
||||
env:
|
||||
LABEL_NAME: ${{ steps.process.outputs.label }}
|
||||
with:
|
||||
script: |
|
||||
const label = process.env.LABEL_NAME;
|
||||
const labelMeta = {
|
||||
'needs-logs': { color: 'cfd3d7', description: 'Device logs requested for triage' },
|
||||
'needs-info': { color: 'f9d0c4', description: 'More information requested for triage' },
|
||||
};
|
||||
const meta = labelMeta[label];
|
||||
if (!meta) return;
|
||||
|
||||
// Ensure label exists
|
||||
try {
|
||||
await github.rest.issues.getLabel({ owner: context.repo.owner, repo: context.repo.repo, name: label });
|
||||
} catch (e) {
|
||||
if (e.status !== 404) throw e;
|
||||
await github.rest.issues.createLabel({ owner: context.repo.owner, repo: context.repo.repo, name: label, color: meta.color, description: meta.description });
|
||||
}
|
||||
|
||||
// Apply label
|
||||
await github.rest.issues.addLabels({ owner: context.repo.owner, repo: context.repo.repo, issue_number: context.payload.issue.number, labels: [label] });
|
||||
|
||||
- name: Comment on issue
|
||||
if: steps.process.outputs.should_comment == 'true'
|
||||
uses: actions/github-script@v9
|
||||
env:
|
||||
COMMENT_BODY: ${{ steps.process.outputs.comment_body }}
|
||||
with:
|
||||
script: |
|
||||
await github.rest.issues.createComment({
|
||||
owner: context.repo.owner,
|
||||
repo: context.repo.repo,
|
||||
issue_number: context.payload.issue.number,
|
||||
body: process.env.COMMENT_BODY
|
||||
});
|
||||
@@ -1,139 +0,0 @@
|
||||
name: PR Triage (Models)
|
||||
|
||||
on:
|
||||
pull_request_target:
|
||||
types: [opened]
|
||||
|
||||
permissions:
|
||||
pull-requests: write
|
||||
issues: write
|
||||
models: read
|
||||
|
||||
concurrency:
|
||||
group: ${{ github.workflow }}-${{ github.event.pull_request.number }}
|
||||
cancel-in-progress: true
|
||||
|
||||
jobs:
|
||||
triage:
|
||||
if: ${{ github.repository == 'meshtastic/firmware' && github.event.pull_request.user.type != 'Bot' }}
|
||||
runs-on: ubuntu-latest
|
||||
steps:
|
||||
# ─────────────────────────────────────────────────────────────────────────
|
||||
# Step 1: Check if PR already has automation/type labels (skip if so)
|
||||
# ─────────────────────────────────────────────────────────────────────────
|
||||
- name: Check existing labels
|
||||
uses: actions/github-script@v9
|
||||
id: check-labels
|
||||
with:
|
||||
script: |
|
||||
const skipLabels = new Set(['automation']);
|
||||
const typeLabels = new Set(['bugfix', 'hardware-support', 'enhancement', 'dependencies', 'submodules', 'github_actions', 'trunk', 'cleanup']);
|
||||
const prLabels = context.payload.pull_request.labels.map(l => l.name);
|
||||
|
||||
const shouldSkipAll = prLabels.some(l => skipLabels.has(l));
|
||||
const hasTypeLabel = prLabels.some(l => typeLabels.has(l));
|
||||
|
||||
core.setOutput('skip_all', shouldSkipAll ? 'true' : 'false');
|
||||
core.setOutput('has_type_label', hasTypeLabel ? 'true' : 'false');
|
||||
|
||||
# ─────────────────────────────────────────────────────────────────────────
|
||||
# Step 2: Quality check (spam/AI-slop detection)
|
||||
# ─────────────────────────────────────────────────────────────────────────
|
||||
- name: Detect spam or low-quality content
|
||||
if: steps.check-labels.outputs.skip_all != 'true'
|
||||
uses: actions/ai-inference@v2
|
||||
id: quality
|
||||
continue-on-error: true
|
||||
with:
|
||||
max-tokens: 20
|
||||
prompt: |
|
||||
Is this GitHub pull request spam, AI-generated slop, or low quality?
|
||||
|
||||
Title: ${{ github.event.pull_request.title }}
|
||||
Body: ${{ github.event.pull_request.body }}
|
||||
|
||||
Respond with exactly one of: spam, ai-generated, needs-review, ok
|
||||
system-prompt: You detect spam and low-quality contributions. Be conservative - only flag obvious spam or AI slop.
|
||||
model: openai/gpt-4o-mini
|
||||
|
||||
- name: Apply quality label if needed
|
||||
if: steps.check-labels.outputs.skip_all != 'true' && steps.quality.outputs.response != '' && steps.quality.outputs.response != 'ok'
|
||||
uses: actions/github-script@v9
|
||||
id: quality-label
|
||||
env:
|
||||
QUALITY_LABEL: ${{ steps.quality.outputs.response }}
|
||||
with:
|
||||
script: |
|
||||
const label = (process.env.QUALITY_LABEL || '').trim().toLowerCase();
|
||||
const labelMeta = {
|
||||
'spam': { color: 'd73a4a', description: 'Possible spam' },
|
||||
'ai-generated': { color: 'fbca04', description: 'Possible AI-generated low-quality content' },
|
||||
'needs-review': { color: 'f9d0c4', description: 'Needs human review' },
|
||||
};
|
||||
const meta = labelMeta[label];
|
||||
if (!meta) return;
|
||||
|
||||
// Ensure label exists
|
||||
try {
|
||||
await github.rest.issues.getLabel({ owner: context.repo.owner, repo: context.repo.repo, name: label });
|
||||
} catch (e) {
|
||||
if (e.status !== 404) throw e;
|
||||
await github.rest.issues.createLabel({ owner: context.repo.owner, repo: context.repo.repo, name: label, color: meta.color, description: meta.description });
|
||||
}
|
||||
|
||||
// Apply label
|
||||
await github.rest.issues.addLabels({ owner: context.repo.owner, repo: context.repo.repo, issue_number: context.payload.pull_request.number, labels: [label] });
|
||||
|
||||
core.setOutput('is_spam', 'true');
|
||||
|
||||
# ─────────────────────────────────────────────────────────────────────────
|
||||
# Step 3: Auto-label PR type (bugfix/hardware-support/enhancement)
|
||||
# Only skip for spam/ai-generated; still classify needs-review PRs
|
||||
# ─────────────────────────────────────────────────────────────────────────
|
||||
- name: Classify PR for labeling
|
||||
if: steps.check-labels.outputs.skip_all != 'true' && steps.check-labels.outputs.has_type_label != 'true' && steps.quality.outputs.response != 'spam' && steps.quality.outputs.response != 'ai-generated'
|
||||
uses: actions/ai-inference@v2
|
||||
id: classify
|
||||
continue-on-error: true
|
||||
with:
|
||||
max-tokens: 30
|
||||
prompt: |
|
||||
Classify this pull request into exactly one category.
|
||||
|
||||
Return exactly one of: bugfix, hardware-support, enhancement
|
||||
|
||||
Use bugfix if it fixes a bug, crash, or incorrect behavior.
|
||||
Use hardware-support if it adds or improves support for a specific hardware device/variant.
|
||||
Use enhancement if it adds a new feature, improves performance, or refactors code.
|
||||
|
||||
Title: ${{ github.event.pull_request.title }}
|
||||
Body: ${{ github.event.pull_request.body }}
|
||||
system-prompt: You classify pull requests into categories. Be conservative and pick the most appropriate single label.
|
||||
model: openai/gpt-4o-mini
|
||||
|
||||
- name: Apply type label
|
||||
if: steps.check-labels.outputs.skip_all != 'true' && steps.check-labels.outputs.has_type_label != 'true' && steps.classify.outputs.response != ''
|
||||
uses: actions/github-script@v9
|
||||
env:
|
||||
TYPE_LABEL: ${{ steps.classify.outputs.response }}
|
||||
with:
|
||||
script: |
|
||||
const label = (process.env.TYPE_LABEL || '').trim().toLowerCase();
|
||||
const labelMeta = {
|
||||
'bugfix': { color: 'd73a4a', description: 'Bug fix' },
|
||||
'hardware-support': { color: '0e8a16', description: 'Hardware support addition or improvement' },
|
||||
'enhancement': { color: 'a2eeef', description: 'New feature or enhancement' },
|
||||
};
|
||||
const meta = labelMeta[label];
|
||||
if (!meta) return;
|
||||
|
||||
// Ensure label exists
|
||||
try {
|
||||
await github.rest.issues.getLabel({ owner: context.repo.owner, repo: context.repo.repo, name: label });
|
||||
} catch (e) {
|
||||
if (e.status !== 404) throw e;
|
||||
await github.rest.issues.createLabel({ owner: context.repo.owner, repo: context.repo.repo, name: label, color: meta.color, description: meta.description });
|
||||
}
|
||||
|
||||
// Apply label
|
||||
await github.rest.issues.addLabels({ owner: context.repo.owner, repo: context.repo.repo, issue_number: context.payload.pull_request.number, labels: [label] });
|
||||
@@ -4,36 +4,16 @@ on:
|
||||
- cron: 0 8 * * 1-5
|
||||
workflow_dispatch: {}
|
||||
|
||||
permissions: read-all
|
||||
|
||||
jobs:
|
||||
trunk_check:
|
||||
if: github.repository == 'meshtastic/firmware'
|
||||
name: Trunk Check and Upload
|
||||
runs-on: ubuntu-24.04
|
||||
name: Trunk Check Upload
|
||||
runs-on: ubuntu-latest
|
||||
|
||||
steps:
|
||||
- name: Checkout
|
||||
uses: actions/checkout@v6
|
||||
uses: actions/checkout@v4
|
||||
|
||||
- name: Trunk Check
|
||||
uses: trunk-io/trunk-action@v1
|
||||
uses: trunk-io/trunk-action@782e83f803ca6e369f035d64c6ba2768174ba61b
|
||||
with:
|
||||
trunk-token: ${{ secrets.TRUNK_TOKEN }}
|
||||
|
||||
trunk_upgrade:
|
||||
if: github.repository == 'meshtastic/firmware'
|
||||
# See: https://github.com/trunk-io/trunk-action/blob/v1/readme.md#automatic-upgrades
|
||||
name: Trunk Upgrade (PR)
|
||||
runs-on: ubuntu-24.04
|
||||
permissions:
|
||||
contents: write # For trunk to create PRs
|
||||
pull-requests: write # For trunk to create PRs
|
||||
steps:
|
||||
- name: Checkout
|
||||
uses: actions/checkout@v6
|
||||
|
||||
- name: Trunk Upgrade
|
||||
uses: trunk-io/trunk-action/upgrade@v1
|
||||
with:
|
||||
base: master
|
||||
|
||||
@@ -0,0 +1,90 @@
|
||||
name: Package Native
|
||||
|
||||
on:
|
||||
workflow_call:
|
||||
workflow_dispatch:
|
||||
|
||||
permissions:
|
||||
contents: write
|
||||
packages: write
|
||||
|
||||
jobs:
|
||||
build-native:
|
||||
uses: ./.github/workflows/build_native.yml
|
||||
|
||||
package-native:
|
||||
runs-on: ubuntu-22.04
|
||||
needs: build-native
|
||||
steps:
|
||||
- name: Checkout code
|
||||
uses: actions/checkout@v4
|
||||
with:
|
||||
submodules: recursive
|
||||
ref: ${{github.event.pull_request.head.ref}}
|
||||
repository: ${{github.event.pull_request.head.repo.full_name}}
|
||||
|
||||
- name: Pull web ui
|
||||
uses: dsaltares/fetch-gh-release-asset@master
|
||||
with:
|
||||
repo: meshtastic/web
|
||||
file: build.tar
|
||||
target: build.tar
|
||||
token: ${{ secrets.GITHUB_TOKEN }}
|
||||
|
||||
- name: Get release version string
|
||||
run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
|
||||
id: version
|
||||
|
||||
- name: Download artifacts
|
||||
uses: actions/download-artifact@v4
|
||||
with:
|
||||
name: firmware-native-${{ steps.version.outputs.long }}.zip
|
||||
merge-multiple: true
|
||||
|
||||
- name: Display structure of downloaded files
|
||||
run: ls -R
|
||||
|
||||
- name: build .debpkg
|
||||
run: |
|
||||
mkdir -p .debpkg/DEBIAN
|
||||
mkdir -p .debpkg/usr/share/meshtasticd/web
|
||||
mkdir -p .debpkg/usr/sbin
|
||||
mkdir -p .debpkg/etc/meshtasticd
|
||||
mkdir -p .debpkg/etc/meshtasticd/config.d
|
||||
mkdir -p .debpkg/etc/meshtasticd/available.d
|
||||
mkdir -p .debpkg/usr/lib/systemd/system/
|
||||
tar -xf build.tar -C .debpkg/usr/share/meshtasticd/web
|
||||
shopt -s dotglob nullglob
|
||||
if [ -d .debpkg/usr/share/meshtasticd/web/build ]; then mv .debpkg/usr/share/meshtasticd/web/build/* .debpkg/usr/share/meshtasticd/web/; fi
|
||||
if [ -d .debpkg/usr/share/meshtasticd/web/build ]; then rmdir .debpkg/usr/share/meshtasticd/web/build; fi
|
||||
if [ -d .debpkg/usr/share/meshtasticd/web/.DS_Store ]; then rm -f .debpkg/usr/share/meshtasticd/web/.DS_Store; fi
|
||||
gunzip .debpkg/usr/share/meshtasticd/web/ -r
|
||||
cp release/meshtasticd_linux_x86_64 .debpkg/usr/sbin/meshtasticd
|
||||
cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml
|
||||
cp bin/config.d/* .debpkg/etc/meshtasticd/available.d/ -r
|
||||
chmod +x .debpkg/usr/sbin/meshtasticd
|
||||
cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service
|
||||
echo "/etc/meshtasticd/config.yaml" > .debpkg/DEBIAN/conffiles
|
||||
chmod +x .debpkg/DEBIAN/conffiles
|
||||
# Transition /usr/share/doc/meshtasticd to /usr/share/meshtasticd
|
||||
echo "rm -rf /usr/share/doc/meshtasticd" > .debpkg/DEBIAN/preinst
|
||||
chmod +x .debpkg/DEBIAN/preinst
|
||||
echo "ln -sf /usr/share/meshtasticd /usr/share/doc/meshtasticd" > .debpkg/DEBIAN/postinst
|
||||
chmod +x .debpkg/DEBIAN/postinst
|
||||
|
||||
- uses: jiro4989/build-deb-action@v3
|
||||
with:
|
||||
package: meshtasticd
|
||||
package_root: .debpkg
|
||||
maintainer: Jonathan Bennett
|
||||
version: ${{ steps.version.outputs.long }} # refs/tags/v*.*.*
|
||||
arch: amd64
|
||||
depends: libyaml-cpp0.7, openssl, libulfius2.7, libi2c0
|
||||
desc: Native Linux Meshtastic binary.
|
||||
|
||||
- uses: actions/upload-artifact@v4
|
||||
with:
|
||||
name: meshtasticd_${{ steps.version.outputs.long }}_amd64.deb
|
||||
overwrite: true
|
||||
path: |
|
||||
./*.deb
|
||||
@@ -18,7 +18,8 @@ on:
|
||||
type: string
|
||||
|
||||
permissions:
|
||||
contents: read
|
||||
contents: write
|
||||
packages: write
|
||||
|
||||
jobs:
|
||||
build-debian-src:
|
||||
@@ -33,7 +34,7 @@ jobs:
|
||||
needs: build-debian-src
|
||||
steps:
|
||||
- name: Checkout code
|
||||
uses: actions/checkout@v6
|
||||
uses: actions/checkout@v4
|
||||
with:
|
||||
submodules: recursive
|
||||
path: meshtasticd
|
||||
@@ -57,7 +58,7 @@ jobs:
|
||||
id: version
|
||||
|
||||
- name: Download artifacts
|
||||
uses: actions/download-artifact@v8
|
||||
uses: actions/download-artifact@v4
|
||||
with:
|
||||
name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
|
||||
merge-multiple: true
|
||||
|
||||
@@ -1,72 +0,0 @@
|
||||
name: Package PlatformIO Library Dependencies
|
||||
# trunk-ignore-all(checkov/CKV_GHA_7): Allow workflow_dispatch inputs for testing
|
||||
|
||||
on:
|
||||
workflow_call:
|
||||
inputs:
|
||||
pio_env:
|
||||
description: PlatformIO environment to target
|
||||
required: true
|
||||
type: string
|
||||
workflow_dispatch:
|
||||
inputs:
|
||||
pio_env:
|
||||
description: PlatformIO environment to target
|
||||
required: true
|
||||
type: string
|
||||
|
||||
permissions:
|
||||
contents: read
|
||||
|
||||
jobs:
|
||||
pkg-pio-libdeps:
|
||||
runs-on: ubuntu-24.04
|
||||
steps:
|
||||
- name: Checkout code
|
||||
uses: actions/checkout@v6
|
||||
with:
|
||||
submodules: recursive
|
||||
|
||||
- name: Setup Python
|
||||
uses: actions/setup-python@v6
|
||||
with:
|
||||
python-version: 3.x
|
||||
|
||||
- name: Install deps
|
||||
shell: bash
|
||||
run: |
|
||||
pip install platformio
|
||||
|
||||
- name: Get release version string
|
||||
run: |
|
||||
echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
|
||||
id: version
|
||||
|
||||
- name: Fetch libdeps
|
||||
shell: bash
|
||||
run: |-
|
||||
platformio pkg install -e ${{ inputs.pio_env }}
|
||||
platformio pkg install -e ${{ inputs.pio_env }} -t platformio/tool-scons@4.40502.0
|
||||
env:
|
||||
PLATFORMIO_LIBDEPS_DIR: pio/libdeps
|
||||
PLATFORMIO_PACKAGES_DIR: pio/packages
|
||||
PLATFORMIO_CORE_DIR: pio/core
|
||||
PLATFORMIO_SETTING_ENABLE_TELEMETRY: 0
|
||||
PLATFORMIO_SETTING_CHECK_PLATFORMIO_INTERVAL: 3650
|
||||
PLATFORMIO_SETTING_CHECK_PRUNE_SYSTEM_THRESHOLD: 10240
|
||||
|
||||
- name: Mangle platformio cache
|
||||
# Add "1" to epoch-timestamps of all downloads in the cache.
|
||||
# This is a hack to prevent internet access at build-time.
|
||||
run: |
|
||||
cp pio/core/.cache/downloads/usage.db pio/core/.cache/downloads/usage.db.bak
|
||||
jq -c 'with_entries(.value |= (. | tostring + "1" | tonumber))' pio/core/.cache/downloads/usage.db.bak > pio/core/.cache/downloads/usage.db
|
||||
|
||||
- name: Store binaries as an artifact
|
||||
uses: actions/upload-artifact@v7
|
||||
with:
|
||||
name: platformio-deps-${{ inputs.pio_env }}-${{ steps.version.outputs.long }}
|
||||
overwrite: true
|
||||
include-hidden-files: true
|
||||
path: |
|
||||
pio/*
|
||||
@@ -5,8 +5,6 @@ on:
|
||||
secrets:
|
||||
PPA_GPG_PRIVATE_KEY:
|
||||
required: true
|
||||
PPA_SFTP_PRIVATE_KEY:
|
||||
required: true
|
||||
inputs:
|
||||
ppa_repo:
|
||||
description: Meshtastic PPA to target
|
||||
@@ -18,7 +16,8 @@ on:
|
||||
type: string
|
||||
|
||||
permissions:
|
||||
contents: read
|
||||
contents: write
|
||||
packages: write
|
||||
|
||||
jobs:
|
||||
build-debian-src:
|
||||
@@ -29,24 +28,25 @@ jobs:
|
||||
build_location: ppa
|
||||
|
||||
package-ppa:
|
||||
if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
|
||||
runs-on: ubuntu-24.04
|
||||
needs: build-debian-src
|
||||
steps:
|
||||
- name: Checkout code
|
||||
uses: actions/checkout@v6
|
||||
uses: actions/checkout@v4
|
||||
with:
|
||||
submodules: recursive
|
||||
path: meshtasticd
|
||||
ref: ${{github.event.pull_request.head.ref}}
|
||||
repository: ${{github.event.pull_request.head.repo.full_name}}
|
||||
|
||||
- name: Install deps
|
||||
shell: bash
|
||||
run: |
|
||||
sudo apt-get update -y --fix-missing
|
||||
sudo apt-get install -y dput openssh-client
|
||||
sudo apt-get install -y dput
|
||||
|
||||
- name: Import GPG key
|
||||
uses: crazy-max/ghaction-import-gpg@v7
|
||||
uses: crazy-max/ghaction-import-gpg@v6
|
||||
with:
|
||||
gpg_private_key: ${{ secrets.PPA_GPG_PRIVATE_KEY }}
|
||||
id: gpg
|
||||
@@ -60,7 +60,7 @@ jobs:
|
||||
id: version
|
||||
|
||||
- name: Download artifacts
|
||||
uses: actions/download-artifact@v8
|
||||
uses: actions/download-artifact@v4
|
||||
with:
|
||||
name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
|
||||
merge-multiple: true
|
||||
@@ -68,42 +68,7 @@ jobs:
|
||||
- name: Display structure of downloaded files
|
||||
run: ls -lah
|
||||
|
||||
- name: Trust Launchpad's SSH key
|
||||
- name: Publish with dput
|
||||
if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
|
||||
run: |
|
||||
mkdir -p ~/.ssh
|
||||
ssh-keyscan -H ppa.launchpad.net >> ~/.ssh/known_hosts
|
||||
|
||||
- name: Setup dput config
|
||||
env:
|
||||
ppa_login: meshtasticorg
|
||||
run: |
|
||||
sudo tee /etc/meshtastic-dput.cf >/dev/null <<EOF
|
||||
[ppa]
|
||||
fqdn = ppa.launchpad.net
|
||||
method = ftp
|
||||
incoming = ~%(ppa)s
|
||||
login = anonymous
|
||||
|
||||
[ssh-ppa]
|
||||
fqdn = ppa.launchpad.net
|
||||
method = sftp
|
||||
incoming = ~%(ssh-ppa)s
|
||||
login = ${ppa_login}
|
||||
EOF
|
||||
|
||||
- name: Import SSH key
|
||||
uses: webfactory/ssh-agent@v0.10.0
|
||||
with:
|
||||
ssh-private-key: ${{ secrets.PPA_SFTP_PRIVATE_KEY }}
|
||||
id: ssh
|
||||
|
||||
- name: Publish with dput (sftp)
|
||||
timeout-minutes: 30 # dput is terrible, sometimes runs 'forever'
|
||||
env:
|
||||
up_ppa_repo: ${{ inputs.ppa_repo }}
|
||||
up_series: ${{ inputs.series }}
|
||||
up_version: ${{ steps.version.outputs.deb }}
|
||||
run: >
|
||||
dput -c /etc/meshtastic-dput.cf
|
||||
ssh-${up_ppa_repo}
|
||||
meshtasticd_${up_version}~${up_series}_source.changes
|
||||
dput ${{ inputs.ppa_repo }} meshtasticd_${{ steps.version.outputs.deb }}~${{ inputs.series }}_source.changes
|
||||
|
||||
@@ -0,0 +1,90 @@
|
||||
name: Package Raspbian
|
||||
|
||||
on:
|
||||
workflow_call:
|
||||
workflow_dispatch:
|
||||
|
||||
permissions:
|
||||
contents: write
|
||||
packages: write
|
||||
|
||||
jobs:
|
||||
build-raspbian:
|
||||
uses: ./.github/workflows/build_raspbian.yml
|
||||
|
||||
package-raspbian:
|
||||
runs-on: ubuntu-22.04
|
||||
needs: build-raspbian
|
||||
steps:
|
||||
- name: Checkout code
|
||||
uses: actions/checkout@v4
|
||||
with:
|
||||
submodules: recursive
|
||||
ref: ${{github.event.pull_request.head.ref}}
|
||||
repository: ${{github.event.pull_request.head.repo.full_name}}
|
||||
|
||||
- name: Pull web ui
|
||||
uses: dsaltares/fetch-gh-release-asset@master
|
||||
with:
|
||||
repo: meshtastic/web
|
||||
file: build.tar
|
||||
target: build.tar
|
||||
token: ${{ secrets.GITHUB_TOKEN }}
|
||||
|
||||
- name: Get release version string
|
||||
run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
|
||||
id: version
|
||||
|
||||
- name: Download artifacts
|
||||
uses: actions/download-artifact@v4
|
||||
with:
|
||||
name: firmware-raspbian-${{ steps.version.outputs.long }}.zip
|
||||
merge-multiple: true
|
||||
|
||||
- name: Display structure of downloaded files
|
||||
run: ls -R
|
||||
|
||||
- name: build .debpkg
|
||||
run: |
|
||||
mkdir -p .debpkg/DEBIAN
|
||||
mkdir -p .debpkg/usr/share/meshtasticd/web
|
||||
mkdir -p .debpkg/usr/sbin
|
||||
mkdir -p .debpkg/etc/meshtasticd
|
||||
mkdir -p .debpkg/etc/meshtasticd/config.d
|
||||
mkdir -p .debpkg/etc/meshtasticd/available.d
|
||||
mkdir -p .debpkg/usr/lib/systemd/system/
|
||||
tar -xf build.tar -C .debpkg/usr/share/meshtasticd/web
|
||||
shopt -s dotglob nullglob
|
||||
if [ -d .debpkg/usr/share/meshtasticd/web/build ]; then mv .debpkg/usr/share/meshtasticd/web/build/* .debpkg/usr/share/meshtasticd/web/; fi
|
||||
if [ -d .debpkg/usr/share/meshtasticd/web/build ]; then rmdir .debpkg/usr/share/meshtasticd/web/build; fi
|
||||
if [ -d .debpkg/usr/share/meshtasticd/web/.DS_Store ]; then rm -f .debpkg/usr/share/meshtasticd/web/.DS_Store; fi
|
||||
gunzip .debpkg/usr/share/meshtasticd/web/ -r
|
||||
cp release/meshtasticd_linux_aarch64 .debpkg/usr/sbin/meshtasticd
|
||||
cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml
|
||||
cp bin/config.d/* .debpkg/etc/meshtasticd/available.d/ -r
|
||||
chmod +x .debpkg/usr/sbin/meshtasticd
|
||||
cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service
|
||||
echo "/etc/meshtasticd/config.yaml" > .debpkg/DEBIAN/conffiles
|
||||
chmod +x .debpkg/DEBIAN/conffiles
|
||||
# Transition /usr/share/doc/meshtasticd to /usr/share/meshtasticd
|
||||
echo "rm -rf /usr/share/doc/meshtasticd" > .debpkg/DEBIAN/preinst
|
||||
chmod +x .debpkg/DEBIAN/preinst
|
||||
echo "ln -sf /usr/share/meshtasticd /usr/share/doc/meshtasticd" > .debpkg/DEBIAN/postinst
|
||||
chmod +x .debpkg/DEBIAN/postinst
|
||||
|
||||
- uses: jiro4989/build-deb-action@v3
|
||||
with:
|
||||
package: meshtasticd
|
||||
package_root: .debpkg
|
||||
maintainer: Jonathan Bennett
|
||||
version: ${{ steps.version.outputs.long }} # refs/tags/v*.*.*
|
||||
arch: arm64
|
||||
depends: libyaml-cpp0.7, openssl, libulfius2.7, libi2c0
|
||||
desc: Native Linux Meshtastic binary.
|
||||
|
||||
- uses: actions/upload-artifact@v4
|
||||
with:
|
||||
name: meshtasticd_${{ steps.version.outputs.long }}_arm64.deb
|
||||
overwrite: true
|
||||
path: |
|
||||
./*.deb
|
||||
@@ -0,0 +1,90 @@
|
||||
name: Package Raspbian
|
||||
|
||||
on:
|
||||
workflow_call:
|
||||
workflow_dispatch:
|
||||
|
||||
permissions:
|
||||
contents: write
|
||||
packages: write
|
||||
|
||||
jobs:
|
||||
build-raspbian_armv7l:
|
||||
uses: ./.github/workflows/build_raspbian_armv7l.yml
|
||||
|
||||
package-raspbian_armv7l:
|
||||
runs-on: ubuntu-22.04
|
||||
needs: build-raspbian_armv7l
|
||||
steps:
|
||||
- name: Checkout code
|
||||
uses: actions/checkout@v4
|
||||
with:
|
||||
submodules: recursive
|
||||
ref: ${{github.event.pull_request.head.ref}}
|
||||
repository: ${{github.event.pull_request.head.repo.full_name}}
|
||||
|
||||
- name: Pull web ui
|
||||
uses: dsaltares/fetch-gh-release-asset@master
|
||||
with:
|
||||
repo: meshtastic/web
|
||||
file: build.tar
|
||||
target: build.tar
|
||||
token: ${{ secrets.GITHUB_TOKEN }}
|
||||
|
||||
- name: Get release version string
|
||||
run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
|
||||
id: version
|
||||
|
||||
- name: Download artifacts
|
||||
uses: actions/download-artifact@v4
|
||||
with:
|
||||
name: firmware-raspbian-armv7l-${{ steps.version.outputs.long }}.zip
|
||||
merge-multiple: true
|
||||
|
||||
- name: Display structure of downloaded files
|
||||
run: ls -R
|
||||
|
||||
- name: build .debpkg
|
||||
run: |
|
||||
mkdir -p .debpkg/DEBIAN
|
||||
mkdir -p .debpkg/usr/share/meshtasticd/web
|
||||
mkdir -p .debpkg/usr/sbin
|
||||
mkdir -p .debpkg/etc/meshtasticd
|
||||
mkdir -p .debpkg/etc/meshtasticd/config.d
|
||||
mkdir -p .debpkg/etc/meshtasticd/available.d
|
||||
mkdir -p .debpkg/usr/lib/systemd/system/
|
||||
tar -xf build.tar -C .debpkg/usr/share/meshtasticd/web
|
||||
shopt -s dotglob nullglob
|
||||
if [ -d .debpkg/usr/share/meshtasticd/web/build ]; then mv .debpkg/usr/share/meshtasticd/web/build/* .debpkg/usr/share/meshtasticd/web/; fi
|
||||
if [ -d .debpkg/usr/share/meshtasticd/web/build ]; then rmdir .debpkg/usr/share/meshtasticd/web/build; fi
|
||||
if [ -d .debpkg/usr/share/meshtasticd/web/.DS_Store ]; then rm -f .debpkg/usr/share/meshtasticd/web/.DS_Store; fi
|
||||
gunzip .debpkg/usr/share/meshtasticd/web/ -r
|
||||
cp release/meshtasticd_linux_armv7l .debpkg/usr/sbin/meshtasticd
|
||||
cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml
|
||||
cp bin/config.d/* .debpkg/etc/meshtasticd/available.d/ -r
|
||||
chmod +x .debpkg/usr/sbin/meshtasticd
|
||||
cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service
|
||||
echo "/etc/meshtasticd/config.yaml" > .debpkg/DEBIAN/conffiles
|
||||
chmod +x .debpkg/DEBIAN/conffiles
|
||||
# Transition /usr/share/doc/meshtasticd to /usr/share/meshtasticd
|
||||
echo "rm -rf /usr/share/doc/meshtasticd" > .debpkg/DEBIAN/preinst
|
||||
chmod +x .debpkg/DEBIAN/preinst
|
||||
echo "ln -sf /usr/share/meshtasticd /usr/share/doc/meshtasticd" > .debpkg/DEBIAN/postinst
|
||||
chmod +x .debpkg/DEBIAN/postinst
|
||||
|
||||
- uses: jiro4989/build-deb-action@v3
|
||||
with:
|
||||
package: meshtasticd
|
||||
package_root: .debpkg
|
||||
maintainer: Jonathan Bennett
|
||||
version: ${{ steps.version.outputs.long }} # refs/tags/v*.*.*
|
||||
arch: armhf
|
||||
depends: libyaml-cpp0.7, openssl, libulfius2.7, libi2c0
|
||||
desc: Native Linux Meshtastic binary.
|
||||
|
||||
- uses: actions/upload-artifact@v4
|
||||
with:
|
||||
name: meshtasticd_${{ steps.version.outputs.long }}_armhf.deb
|
||||
overwrite: true
|
||||
path: |
|
||||
./*.deb
|
||||
@@ -1,24 +0,0 @@
|
||||
name: Check PR Labels
|
||||
|
||||
on:
|
||||
pull_request:
|
||||
types: [opened, edited, labeled, unlabeled, synchronize, reopened]
|
||||
|
||||
permissions:
|
||||
pull-requests: read
|
||||
contents: read
|
||||
|
||||
jobs:
|
||||
check-label:
|
||||
runs-on: ubuntu-latest
|
||||
steps:
|
||||
- name: Check for PR labels
|
||||
uses: actions/github-script@v9
|
||||
with:
|
||||
script: |
|
||||
const labels = context.payload.pull_request.labels.map(label => label.name);
|
||||
const requiredLabels = ['bugfix', 'enhancement', 'hardware-support', 'dependencies', 'submodules', 'github_actions', 'trunk', 'cleanup'];
|
||||
const hasRequiredLabel = labels.some(label => requiredLabels.includes(label));
|
||||
if (!hasRequiredLabel) {
|
||||
core.setFailed(`PR must have at least one of the following labels before it can be merged: ${requiredLabels.join(', ')}.`);
|
||||
}
|
||||
@@ -1,238 +0,0 @@
|
||||
name: Tests
|
||||
|
||||
# DISABLED: Changed from automatic PR triggers to manual only
|
||||
on:
|
||||
workflow_dispatch:
|
||||
inputs:
|
||||
reason:
|
||||
description: "Reason for manual test run"
|
||||
required: false
|
||||
default: "Manual test execution"
|
||||
|
||||
concurrency:
|
||||
group: tests-${{ github.head_ref || github.run_id }}
|
||||
cancel-in-progress: true
|
||||
|
||||
permissions:
|
||||
contents: read
|
||||
actions: read
|
||||
checks: write
|
||||
pull-requests: write
|
||||
|
||||
jobs:
|
||||
native-tests:
|
||||
name: "🧪 Native Tests"
|
||||
if: github.repository == 'meshtastic/firmware'
|
||||
uses: ./.github/workflows/test_native.yml
|
||||
permissions:
|
||||
contents: read
|
||||
actions: read
|
||||
checks: write
|
||||
|
||||
test-summary:
|
||||
name: "📊 Test Results"
|
||||
runs-on: ubuntu-latest
|
||||
needs: [native-tests]
|
||||
if: always()
|
||||
permissions:
|
||||
contents: read
|
||||
actions: read
|
||||
checks: write
|
||||
pull-requests: write
|
||||
steps:
|
||||
- uses: actions/checkout@v6
|
||||
with:
|
||||
submodules: recursive
|
||||
|
||||
- name: Get release version string
|
||||
run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
|
||||
id: version
|
||||
|
||||
- name: Download test artifacts
|
||||
if: needs.native-tests.result != 'skipped'
|
||||
uses: actions/download-artifact@v8
|
||||
with:
|
||||
name: platformio-test-report-${{ steps.version.outputs.long }}
|
||||
merge-multiple: true
|
||||
|
||||
- name: Parse test results and create detailed summary
|
||||
id: test-results
|
||||
run: |
|
||||
echo "## 🧪 Test Results Summary" >> $GITHUB_STEP_SUMMARY
|
||||
echo "" >> $GITHUB_STEP_SUMMARY
|
||||
|
||||
# Check overall job status first
|
||||
if [[ "${{ needs.native-tests.result }}" == "success" ]]; then
|
||||
echo "✅ **Overall Status**: PASSED" >> $GITHUB_STEP_SUMMARY
|
||||
elif [[ "${{ needs.native-tests.result }}" == "failure" ]]; then
|
||||
echo "❌ **Overall Status**: FAILED" >> $GITHUB_STEP_SUMMARY
|
||||
elif [[ "${{ needs.native-tests.result }}" == "cancelled" ]]; then
|
||||
echo "⏸️ **Overall Status**: CANCELLED" >> $GITHUB_STEP_SUMMARY
|
||||
echo "" >> $GITHUB_STEP_SUMMARY
|
||||
echo "Tests were cancelled before completion." >> $GITHUB_STEP_SUMMARY
|
||||
exit 0
|
||||
else
|
||||
echo "⚠️ **Overall Status**: SKIPPED" >> $GITHUB_STEP_SUMMARY
|
||||
echo "" >> $GITHUB_STEP_SUMMARY
|
||||
echo "Tests were skipped." >> $GITHUB_STEP_SUMMARY
|
||||
exit 0
|
||||
fi
|
||||
|
||||
echo "" >> $GITHUB_STEP_SUMMARY
|
||||
|
||||
# Parse detailed test results if available
|
||||
if [ -f "testreport.xml" ]; then
|
||||
echo "### 🔍 Individual Test Results" >> $GITHUB_STEP_SUMMARY
|
||||
echo "" >> $GITHUB_STEP_SUMMARY
|
||||
|
||||
python3 << 'EOF'
|
||||
import xml.etree.ElementTree as ET
|
||||
import os
|
||||
|
||||
try:
|
||||
tree = ET.parse('testreport.xml')
|
||||
root = tree.getroot()
|
||||
|
||||
total_tests = 0
|
||||
passed_tests = 0
|
||||
failed_tests = 0
|
||||
skipped_tests = 0
|
||||
|
||||
# Parse testsuite elements
|
||||
for testsuite in root.findall('.//testsuite'):
|
||||
suite_name = testsuite.get('name', 'Unknown')
|
||||
suite_tests = int(testsuite.get('tests', '0'))
|
||||
suite_failures = int(testsuite.get('failures', '0'))
|
||||
suite_errors = int(testsuite.get('errors', '0'))
|
||||
suite_skipped = int(testsuite.get('skipped', '0'))
|
||||
|
||||
total_tests += suite_tests
|
||||
failed_tests += suite_failures + suite_errors
|
||||
skipped_tests += suite_skipped
|
||||
passed_tests += suite_tests - suite_failures - suite_errors - suite_skipped
|
||||
|
||||
if suite_tests > 0:
|
||||
status = "✅" if (suite_failures + suite_errors) == 0 else "❌"
|
||||
print(f"**{status} Test Suite: {suite_name}**")
|
||||
print(f"- Total: {suite_tests}")
|
||||
print(f"- Passed: ✅ {suite_tests - suite_failures - suite_errors - suite_skipped}")
|
||||
print(f"- Failed: ❌ {suite_failures + suite_errors}")
|
||||
if suite_skipped > 0:
|
||||
print(f"- Skipped: ⏭️ {suite_skipped}")
|
||||
print("")
|
||||
|
||||
# Show individual test results for failed suites
|
||||
if suite_failures + suite_errors > 0:
|
||||
print("**Failed Tests:**")
|
||||
for testcase in testsuite.findall('testcase'):
|
||||
test_name = testcase.get('name', 'Unknown')
|
||||
failure = testcase.find('failure')
|
||||
error = testcase.find('error')
|
||||
|
||||
if failure is not None:
|
||||
msg = failure.get('message', 'Unknown error')[:100]
|
||||
print(f"- ❌ `{test_name}`: {msg}")
|
||||
elif error is not None:
|
||||
msg = error.get('message', 'Unknown error')[:100]
|
||||
print(f"- ❌ `{test_name}`: ERROR - {msg}")
|
||||
print("")
|
||||
else:
|
||||
# Show passed tests for successful suites
|
||||
passed_count = 0
|
||||
for testcase in testsuite.findall('testcase'):
|
||||
if testcase.find('failure') is None and testcase.find('error') is None:
|
||||
if passed_count < 5: # Limit to first 5 to avoid spam
|
||||
test_name = testcase.get('name', 'Unknown')
|
||||
print(f"- ✅ `{test_name}`: PASSED")
|
||||
passed_count += 1
|
||||
if passed_count > 5:
|
||||
print(f"- ... and {passed_count - 5} more tests passed")
|
||||
print("")
|
||||
|
||||
# Summary statistics
|
||||
print("### 📊 Test Statistics")
|
||||
print(f"- **Total Tests**: {total_tests}")
|
||||
print(f"- **Passed**: ✅ {passed_tests}")
|
||||
print(f"- **Failed**: ❌ {failed_tests}")
|
||||
if skipped_tests > 0:
|
||||
print(f"- **Skipped**: ⏭️ {skipped_tests}")
|
||||
|
||||
if failed_tests > 0:
|
||||
print(f"\n❌ **{failed_tests} tests failed out of {total_tests} total**")
|
||||
else:
|
||||
print(f"\n✅ **All {total_tests} tests passed!**")
|
||||
|
||||
except Exception as e:
|
||||
print(f"❌ Error parsing test results: {e}")
|
||||
EOF
|
||||
else
|
||||
echo "⚠️ **No detailed test report available**" >> $GITHUB_STEP_SUMMARY
|
||||
echo "" >> $GITHUB_STEP_SUMMARY
|
||||
echo "Test artifacts may not have been generated properly." >> $GITHUB_STEP_SUMMARY
|
||||
fi
|
||||
|
||||
echo "" >> $GITHUB_STEP_SUMMARY
|
||||
echo "---" >> $GITHUB_STEP_SUMMARY
|
||||
echo "View detailed logs in the [Actions tab](${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }})" >> $GITHUB_STEP_SUMMARY
|
||||
|
||||
- name: Comment test results on PR
|
||||
if: github.event_name == 'pull_request' && needs.native-tests.result != 'skipped'
|
||||
uses: actions/github-script@v9
|
||||
with:
|
||||
script: |
|
||||
const fs = require('fs');
|
||||
|
||||
// Read the step summary to use as PR comment
|
||||
let testSummary = "## 🧪 Test Results Summary\n\n";
|
||||
|
||||
if ("${{ needs.native-tests.result }}" === "success") {
|
||||
testSummary += "✅ **All tests passed!**\n\n";
|
||||
} else if ("${{ needs.native-tests.result }}" === "failure") {
|
||||
testSummary += "❌ **Some tests failed.**\n\n";
|
||||
} else {
|
||||
testSummary += "⚠️ **Tests did not complete normally.**\n\n";
|
||||
}
|
||||
|
||||
testSummary += `View detailed results: [Actions Run](${context.payload.repository.html_url}/actions/runs/${context.runId})\n\n`;
|
||||
testSummary += "---\n";
|
||||
testSummary += "*This comment will be automatically updated when new commits are pushed.*";
|
||||
|
||||
// Find existing comment
|
||||
const comments = await github.rest.issues.listComments({
|
||||
owner: context.repo.owner,
|
||||
repo: context.repo.repo,
|
||||
issue_number: context.issue.number
|
||||
});
|
||||
|
||||
const botComment = comments.data.find(comment =>
|
||||
comment.user.type === 'Bot' &&
|
||||
comment.body.includes('🧪 Test Results Summary')
|
||||
);
|
||||
|
||||
if (botComment) {
|
||||
// Update existing comment
|
||||
await github.rest.issues.updateComment({
|
||||
owner: context.repo.owner,
|
||||
repo: context.repo.repo,
|
||||
comment_id: botComment.id,
|
||||
body: testSummary
|
||||
});
|
||||
} else {
|
||||
// Create new comment
|
||||
await github.rest.issues.createComment({
|
||||
owner: context.repo.owner,
|
||||
repo: context.repo.repo,
|
||||
issue_number: context.issue.number,
|
||||
body: testSummary
|
||||
});
|
||||
}
|
||||
|
||||
- name: Set overall status
|
||||
run: |
|
||||
if [[ "${{ needs.native-tests.result }}" == "success" ]]; then
|
||||
echo "All tests passed! ✅"
|
||||
exit 0
|
||||
else
|
||||
echo "Some tests failed! ❌"
|
||||
exit 1
|
||||
fi
|
||||
@@ -20,11 +20,7 @@ jobs:
|
||||
strategy:
|
||||
fail-fast: false
|
||||
matrix:
|
||||
series:
|
||||
- jammy # 22.04 LTS
|
||||
- noble # 24.04 LTS
|
||||
- questing # 25.10
|
||||
- resolute # 26.04 LTS
|
||||
series: [plucky, oracular, noble, jammy]
|
||||
uses: ./.github/workflows/package_ppa.yml
|
||||
with:
|
||||
ppa_repo: |-
|
||||
@@ -41,106 +37,9 @@ jobs:
|
||||
${{ contains(github.event.release.name, 'Beta') && 'beta' || contains(github.event.release.name, 'Alpha') && 'alpha' }}
|
||||
secrets: inherit
|
||||
|
||||
hook-copr:
|
||||
uses: ./.github/workflows/hook_copr.yml
|
||||
with:
|
||||
copr_project: |-
|
||||
${{ contains(github.event.release.name, 'Beta') && 'beta' || contains(github.event.release.name, 'Alpha') && 'alpha' }}
|
||||
secrets: inherit
|
||||
|
||||
publish-release-notes:
|
||||
if: github.event.action == 'published'
|
||||
runs-on: ubuntu-latest
|
||||
steps:
|
||||
- name: Get release version
|
||||
id: version
|
||||
run: |
|
||||
# Extract version from tag (e.g., v2.7.15.567b8ea -> 2.7.15.567b8ea)
|
||||
VERSION=${GITHUB_REF#refs/tags/v}
|
||||
echo "version=$VERSION" >> $GITHUB_OUTPUT
|
||||
|
||||
- name: Get release notes
|
||||
run: |
|
||||
mkdir -p ./publish
|
||||
gh release view ${{ github.event.release.tag_name }} --json body --jq '.body' > ./publish/release_notes.md
|
||||
env:
|
||||
GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
|
||||
|
||||
- name: Publish release notes to meshtastic.github.io
|
||||
uses: peaceiris/actions-gh-pages@v4
|
||||
with:
|
||||
deploy_key: ${{ secrets.DIST_PAGES_DEPLOY_KEY }}
|
||||
external_repository: meshtastic/meshtastic.github.io
|
||||
publish_branch: master
|
||||
publish_dir: ./publish
|
||||
destination_dir: firmware-${{ steps.version.outputs.version }}
|
||||
user_name: github-actions[bot]
|
||||
user_email: github-actions[bot]@users.noreply.github.com
|
||||
commit_message: Release notes for ${{ steps.version.outputs.version }}
|
||||
enable_jekyll: true
|
||||
|
||||
# Create a PR to bump version when a release is Published
|
||||
bump-version:
|
||||
if: github.event.action == 'published'
|
||||
runs-on: ubuntu-latest
|
||||
permissions:
|
||||
pull-requests: write
|
||||
contents: write
|
||||
defaults:
|
||||
run:
|
||||
shell: bash
|
||||
steps:
|
||||
- name: Checkout
|
||||
uses: actions/checkout@v6
|
||||
with:
|
||||
# Always use master branch for version bumps
|
||||
ref: master
|
||||
|
||||
- name: Setup Python
|
||||
uses: actions/setup-python@v6
|
||||
with:
|
||||
python-version: 3.x
|
||||
|
||||
- name: Bump version.properties
|
||||
run: |
|
||||
# Bump version.properties
|
||||
chmod +x ./bin/bump_version.py
|
||||
./bin/bump_version.py
|
||||
|
||||
- name: Get new release version string
|
||||
run: |
|
||||
echo "short=$(./bin/buildinfo.py short)" >> $GITHUB_OUTPUT
|
||||
id: new_version
|
||||
|
||||
- name: Ensure debian deps are installed
|
||||
run: |
|
||||
sudo apt-get update -y --fix-missing
|
||||
sudo apt-get install -y devscripts
|
||||
|
||||
- name: Update debian changelog
|
||||
run: |
|
||||
# Update debian changelog
|
||||
chmod +x ./debian/ci_changelog.sh
|
||||
./debian/ci_changelog.sh
|
||||
|
||||
- name: Bump org.meshtastic.meshtasticd.metainfo.xml
|
||||
run: |
|
||||
# Bump org.meshtastic.meshtasticd.metainfo.xml
|
||||
pip install -r bin/bump_metainfo/requirements.txt -q
|
||||
chmod +x ./bin/bump_metainfo/bump_metainfo.py
|
||||
./bin/bump_metainfo/bump_metainfo.py --file bin/org.meshtastic.meshtasticd.metainfo.xml "${{ steps.new_version.outputs.short }}"
|
||||
env:
|
||||
PIP_DISABLE_PIP_VERSION_CHECK: 1
|
||||
|
||||
- name: Create Bumps pull request
|
||||
uses: peter-evans/create-pull-request@v8
|
||||
with:
|
||||
base: ${{ github.event.repository.default_branch }}
|
||||
branch: create-pull-request/bump-version
|
||||
labels: github_actions
|
||||
title: Bump release version
|
||||
commit-message: Automated version bumps
|
||||
add-paths: |
|
||||
version.properties
|
||||
debian/changelog
|
||||
bin/org.meshtastic.meshtasticd.metainfo.xml
|
||||
# hook-copr:
|
||||
# uses: ./.github/workflows/hook_copr.yml
|
||||
# with:
|
||||
# copr_project: |-
|
||||
# ${{ contains(github.event.release.name, 'Beta') && 'beta' || contains(github.event.release.name, 'Alpha') && 'alpha' }}
|
||||
# secrets: inherit
|
||||
|
||||
@@ -0,0 +1,41 @@
|
||||
---
|
||||
name: Flawfinder Scan
|
||||
|
||||
on:
|
||||
push:
|
||||
branches: [master, develop]
|
||||
paths-ignore:
|
||||
- "**.md"
|
||||
- "version.properties"
|
||||
|
||||
jobs:
|
||||
flawfinder:
|
||||
runs-on: ubuntu-latest
|
||||
name: Flawfinder
|
||||
|
||||
steps:
|
||||
# step 1
|
||||
- name: clone application source code
|
||||
uses: actions/checkout@v4
|
||||
|
||||
# step 2
|
||||
- name: flawfinder_scan
|
||||
uses: david-a-wheeler/flawfinder@2.0.19
|
||||
with:
|
||||
arguments: "--sarif ./"
|
||||
output: "flawfinder_report.sarif"
|
||||
|
||||
# step 3
|
||||
- name: save report as pipeline artifact
|
||||
uses: actions/upload-artifact@v4
|
||||
with:
|
||||
name: flawfinder_report.sarif
|
||||
overwrite: true
|
||||
path: flawfinder_report.sarif
|
||||
|
||||
# step 4
|
||||
- name: publish code scanning alerts
|
||||
uses: github/codeql-action/upload-sarif@v3
|
||||
with:
|
||||
sarif_file: flawfinder_report.sarif
|
||||
category: flawfinder
|
||||
@@ -3,25 +3,21 @@ name: Semgrep Full Scan
|
||||
|
||||
on:
|
||||
workflow_dispatch:
|
||||
branches:
|
||||
- master
|
||||
schedule:
|
||||
- cron: 0 1 * * 6
|
||||
|
||||
permissions:
|
||||
actions: read
|
||||
contents: read
|
||||
security-events: write
|
||||
- cron: "0 1 * * 6"
|
||||
|
||||
jobs:
|
||||
semgrep-full:
|
||||
if: github.repository == 'meshtastic/firmware'
|
||||
runs-on: ubuntu-24.04
|
||||
runs-on: ubuntu-latest
|
||||
container:
|
||||
image: semgrep/semgrep
|
||||
|
||||
steps:
|
||||
# step 1
|
||||
- name: clone application source code
|
||||
uses: actions/checkout@v6
|
||||
uses: actions/checkout@v4
|
||||
|
||||
# step 2
|
||||
- name: full scan
|
||||
@@ -33,7 +29,7 @@ jobs:
|
||||
|
||||
# step 3
|
||||
- name: save report as pipeline artifact
|
||||
uses: actions/upload-artifact@v7
|
||||
uses: actions/upload-artifact@v4
|
||||
with:
|
||||
name: report.sarif
|
||||
overwrite: true
|
||||
@@ -41,7 +37,7 @@ jobs:
|
||||
|
||||
# step 4
|
||||
- name: publish code scanning alerts
|
||||
uses: github/codeql-action/upload-sarif@v4
|
||||
uses: github/codeql-action/upload-sarif@v3
|
||||
with:
|
||||
sarif_file: report.sarif
|
||||
category: semgrep
|
||||
|
||||
@@ -2,18 +2,16 @@
|
||||
name: Semgrep Differential Scan
|
||||
on: pull_request
|
||||
|
||||
permissions: read-all
|
||||
|
||||
jobs:
|
||||
semgrep-diff:
|
||||
runs-on: ubuntu-24.04
|
||||
runs-on: ubuntu-22.04
|
||||
container:
|
||||
image: semgrep/semgrep
|
||||
|
||||
steps:
|
||||
# step 1
|
||||
- name: clone application source code
|
||||
uses: actions/checkout@v6
|
||||
uses: actions/checkout@v4
|
||||
with:
|
||||
fetch-depth: 0
|
||||
|
||||
|
||||
@@ -11,16 +11,12 @@ permissions:
|
||||
|
||||
jobs:
|
||||
stale_issues:
|
||||
if: github.repository == 'meshtastic/firmware'
|
||||
name: Close Stale Issues
|
||||
runs-on: ubuntu-latest
|
||||
|
||||
steps:
|
||||
- name: Stale PR+Issues
|
||||
uses: actions/stale@v10.2.0
|
||||
uses: actions/stale@v9.0.0
|
||||
with:
|
||||
days-before-stale: 45
|
||||
stale-issue-message: This issue has not had any comment or update in the last month. If it is still relevant, please post update comments. If no comments are made, this issue will be closed automagically in 7 days.
|
||||
close-issue-message: This issue has not had any comment since the last notice. It has been closed automatically. If this is incorrect, or the issue becomes relevant again, please request that it is reopened.
|
||||
exempt-issue-labels: pinned,3.0,triaged,backlog
|
||||
exempt-pr-labels: pinned,3.0,triaged,backlog
|
||||
exempt-issue-labels: pinned,3.0
|
||||
exempt-pr-labels: pinned,3.0
|
||||
|
||||
@@ -14,8 +14,10 @@ jobs:
|
||||
name: Native Simulator Tests
|
||||
runs-on: ubuntu-latest
|
||||
steps:
|
||||
- uses: actions/checkout@v6
|
||||
- uses: actions/checkout@v4
|
||||
with:
|
||||
ref: ${{github.event.pull_request.head.ref}}
|
||||
repository: ${{github.event.pull_request.head.repo.full_name}}
|
||||
submodules: recursive
|
||||
|
||||
- name: Setup native build
|
||||
@@ -38,7 +40,7 @@ jobs:
|
||||
|
||||
- name: Integration test
|
||||
run: |
|
||||
.pio/build/coverage/meshtasticd -s &
|
||||
.pio/build/coverage/program &
|
||||
PID=$!
|
||||
timeout 20 bash -c "until ls -al /proc/$PID/fd | grep socket; do sleep 1; done"
|
||||
echo "Simulator started, launching python test..."
|
||||
@@ -57,10 +59,10 @@ jobs:
|
||||
id: version
|
||||
|
||||
- name: Save coverage information
|
||||
uses: actions/upload-artifact@v7
|
||||
uses: actions/upload-artifact@v4
|
||||
if: always() # run this step even if previous step failed
|
||||
with:
|
||||
name: lcov-coverage-info-native-simulator-test-${{ steps.version.outputs.long }}
|
||||
name: lcov-coverage-info-native-simulator-test-${{ steps.version.outputs.long }}.zip
|
||||
overwrite: true
|
||||
path: ./coverage_*.info
|
||||
|
||||
@@ -68,8 +70,10 @@ jobs:
|
||||
name: Native PlatformIO Tests
|
||||
runs-on: ubuntu-latest
|
||||
steps:
|
||||
- uses: actions/checkout@v6
|
||||
- uses: actions/checkout@v4
|
||||
with:
|
||||
ref: ${{github.event.pull_request.head.ref}}
|
||||
repository: ${{github.event.pull_request.head.repo.full_name}}
|
||||
submodules: recursive
|
||||
|
||||
- name: Setup native build
|
||||
@@ -86,19 +90,13 @@ jobs:
|
||||
run: sed -i 's/-DBUILD_EPOCH=$UNIX_TIME/#-DBUILD_EPOCH=$UNIX_TIME/' platformio.ini
|
||||
|
||||
- name: PlatformIO Tests
|
||||
run: |
|
||||
set -o pipefail
|
||||
# Filter out SKIPPED summary rows for hardware variants that can't run on the
|
||||
# native host. They flood the log and make it harder to spot real failures.
|
||||
# The JUnit XML is written directly to testreport.xml before the pipe, so
|
||||
# the test artifact is unaffected.
|
||||
platformio test -e coverage -v --junit-output-path testreport.xml 2>&1 | grep -v "[[:space:]]SKIPPED$"
|
||||
run: platformio test -e coverage -v --junit-output-path testreport.xml
|
||||
|
||||
- name: Save test results
|
||||
if: always() # run this step even if previous step failed
|
||||
uses: actions/upload-artifact@v7
|
||||
uses: actions/upload-artifact@v4
|
||||
with:
|
||||
name: platformio-test-report-${{ steps.version.outputs.long }}
|
||||
name: platformio-test-report-${{ steps.version.outputs.long }}.zip
|
||||
overwrite: true
|
||||
path: ./testreport.xml
|
||||
|
||||
@@ -110,10 +108,10 @@ jobs:
|
||||
sed -i -e "s#${PWD}#.#" coverage_tests.info # Make paths relative.
|
||||
|
||||
- name: Save coverage information
|
||||
uses: actions/upload-artifact@v7
|
||||
uses: actions/upload-artifact@v4
|
||||
if: always() # run this step even if previous step failed
|
||||
with:
|
||||
name: lcov-coverage-info-native-platformio-tests-${{ steps.version.outputs.long }}
|
||||
name: lcov-coverage-info-native-platformio-tests-${{ steps.version.outputs.long }}.zip
|
||||
overwrite: true
|
||||
path: ./coverage_*.info
|
||||
|
||||
@@ -129,29 +127,32 @@ jobs:
|
||||
- platformio-tests
|
||||
if: always()
|
||||
steps:
|
||||
- uses: actions/checkout@v6
|
||||
- uses: actions/checkout@v4
|
||||
with:
|
||||
ref: ${{github.event.pull_request.head.ref}}
|
||||
repository: ${{github.event.pull_request.head.repo.full_name}}
|
||||
|
||||
- name: Get release version string
|
||||
run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
|
||||
id: version
|
||||
|
||||
- name: Download test artifacts
|
||||
uses: actions/download-artifact@v8
|
||||
uses: actions/download-artifact@v4
|
||||
with:
|
||||
name: platformio-test-report-${{ steps.version.outputs.long }}
|
||||
name: platformio-test-report-${{ steps.version.outputs.long }}.zip
|
||||
merge-multiple: true
|
||||
|
||||
- name: Test Report
|
||||
uses: dorny/test-reporter@v3.0.0
|
||||
uses: dorny/test-reporter@v1.9.1
|
||||
with:
|
||||
name: PlatformIO Tests
|
||||
path: testreport.xml
|
||||
reporter: java-junit
|
||||
|
||||
- name: Download coverage artifacts
|
||||
uses: actions/download-artifact@v8
|
||||
uses: actions/download-artifact@v4
|
||||
with:
|
||||
pattern: lcov-coverage-info-native-*-${{ steps.version.outputs.long }}
|
||||
pattern: lcov-coverage-info-native-*-${{ steps.version.outputs.long }}.zip
|
||||
path: code-coverage-report
|
||||
merge-multiple: true
|
||||
|
||||
@@ -162,7 +163,7 @@ jobs:
|
||||
genhtml --quiet --legend --prefix "${PWD}" code-coverage-report/coverage_src.info --output-directory code-coverage-report
|
||||
|
||||
- name: Save Code Coverage Report
|
||||
uses: actions/upload-artifact@v7
|
||||
uses: actions/upload-artifact@v4
|
||||
with:
|
||||
name: code-coverage-report-${{ steps.version.outputs.long }}
|
||||
name: code-coverage-report-${{ steps.version.outputs.long }}.zip
|
||||
path: code-coverage-report
|
||||
|
||||
@@ -2,27 +2,20 @@ name: End to end tests
|
||||
|
||||
on:
|
||||
schedule:
|
||||
- cron: 0 0 * * * # Run every day at midnight
|
||||
- cron: "0 0 * * *" # Run every day at midnight
|
||||
workflow_dispatch: {}
|
||||
|
||||
permissions:
|
||||
contents: read
|
||||
actions: read
|
||||
checks: write
|
||||
|
||||
jobs:
|
||||
native-tests:
|
||||
if: github.repository == 'meshtastic/firmware'
|
||||
uses: ./.github/workflows/test_native.yml
|
||||
|
||||
hardware-tests:
|
||||
if: github.repository == 'meshtastic/firmware'
|
||||
runs-on: test-runner
|
||||
steps:
|
||||
- name: Checkout code
|
||||
uses: actions/checkout@v6
|
||||
uses: actions/checkout@v4
|
||||
|
||||
# - uses: actions/setup-python@v6
|
||||
# - uses: actions/setup-python@v5
|
||||
# with:
|
||||
# python-version: '3.10'
|
||||
|
||||
@@ -47,12 +40,12 @@ jobs:
|
||||
pio upgrade
|
||||
|
||||
- name: Setup Node
|
||||
uses: actions/setup-node@v6
|
||||
uses: actions/setup-node@v4
|
||||
with:
|
||||
node-version: 24
|
||||
node-version: 18
|
||||
|
||||
- name: Setup pnpm
|
||||
uses: pnpm/action-setup@v6
|
||||
uses: pnpm/action-setup@v4
|
||||
with:
|
||||
version: latest
|
||||
|
||||
|
||||
@@ -9,16 +9,14 @@ permissions: read-all
|
||||
jobs:
|
||||
trunk_check:
|
||||
name: Trunk Check Runner
|
||||
runs-on: ubuntu-24.04
|
||||
runs-on: ubuntu-latest
|
||||
permissions:
|
||||
checks: write # For trunk to post annotations
|
||||
contents: read # For repo checkout
|
||||
|
||||
steps:
|
||||
- name: Checkout
|
||||
uses: actions/checkout@v6
|
||||
uses: actions/checkout@v4
|
||||
|
||||
- name: Trunk Check
|
||||
uses: trunk-io/trunk-action@v1
|
||||
with:
|
||||
save-annotations: true
|
||||
@@ -1,26 +0,0 @@
|
||||
name: Annotate PR with trunk issues
|
||||
# See: https://github.com/trunk-io/trunk-action/blob/v1/readme.md#getting-inline-annotations-for-fork-prs
|
||||
|
||||
on:
|
||||
workflow_run:
|
||||
workflows: [Pull Request] # Name from `trunk_check.yml`
|
||||
types: [completed]
|
||||
|
||||
permissions: read-all
|
||||
|
||||
jobs:
|
||||
trunk_check:
|
||||
name: Trunk Code Quality Annotate
|
||||
runs-on: ubuntu-24.04
|
||||
permissions:
|
||||
checks: write # For trunk to post annotations
|
||||
contents: read # For repo checkout
|
||||
|
||||
steps:
|
||||
- name: Checkout
|
||||
uses: actions/checkout@v6
|
||||
|
||||
- name: Trunk Check
|
||||
uses: trunk-io/trunk-action@v1
|
||||
with:
|
||||
post-annotations: true
|
||||
@@ -0,0 +1,47 @@
|
||||
name: Run Trunk Fmt on PR Comment
|
||||
|
||||
on:
|
||||
issue_comment:
|
||||
types: [created]
|
||||
|
||||
jobs:
|
||||
trunk-fmt:
|
||||
if: github.event.issue.pull_request != null && contains(github.event.comment.body, 'trunk fmt')
|
||||
runs-on: ubuntu-latest
|
||||
|
||||
steps:
|
||||
- name: Checkout repository
|
||||
uses: actions/checkout@v4
|
||||
with:
|
||||
ref: ${{github.event.pull_request.head.ref}}
|
||||
repository: ${{github.event.pull_request.head.repo.full_name}}
|
||||
|
||||
- name: Install trunk
|
||||
run: curl https://get.trunk.io -fsSL | bash
|
||||
|
||||
- name: Run Trunk Fmt
|
||||
run: trunk fmt
|
||||
|
||||
- name: Get release version string
|
||||
run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
|
||||
id: version
|
||||
|
||||
- name: Commit and push changes
|
||||
run: |
|
||||
git config --global user.name "github-actions[bot]"
|
||||
git config --global user.email "github-actions[bot]@users.noreply.github.com"
|
||||
git add .
|
||||
git commit -m "Add firmware version ${{ steps.version.outputs.long }}"
|
||||
git push
|
||||
|
||||
- name: Comment on PR
|
||||
uses: actions/github-script@v7
|
||||
with:
|
||||
github-token: ${{ secrets.GITHUB_TOKEN }}
|
||||
script: |
|
||||
github.issues.createComment({
|
||||
issue_number: context.issue.number,
|
||||
owner: context.repo.owner,
|
||||
repo: context.repo.repo,
|
||||
body: '`trunk fmt` has been run on this PR.'
|
||||
})
|
||||
@@ -1,22 +1,18 @@
|
||||
name: Update protobufs and regenerate classes
|
||||
on: workflow_dispatch
|
||||
|
||||
permissions: read-all
|
||||
|
||||
jobs:
|
||||
update-protobufs:
|
||||
runs-on: ubuntu-latest
|
||||
permissions: # Needed for peter-evans/create-pull-request.
|
||||
contents: write
|
||||
pull-requests: write
|
||||
|
||||
steps:
|
||||
- name: Checkout code
|
||||
uses: actions/checkout@v6
|
||||
uses: actions/checkout@v4
|
||||
with:
|
||||
submodules: true
|
||||
|
||||
- name: Update submodule
|
||||
if: ${{ github.ref == 'refs/heads/master' || github.ref == 'refs/heads/develop' }}
|
||||
if: ${{ github.ref == 'refs/heads/master' }}
|
||||
run: |
|
||||
git submodule update --remote protobufs
|
||||
|
||||
@@ -31,12 +27,9 @@ jobs:
|
||||
./bin/regen-protos.sh
|
||||
|
||||
- name: Create pull request
|
||||
uses: peter-evans/create-pull-request@v8
|
||||
uses: peter-evans/create-pull-request@v7
|
||||
with:
|
||||
branch: create-pull-request/update-protobufs
|
||||
labels: submodules
|
||||
title: Update protobufs and classes
|
||||
commit-message: Update protobufs
|
||||
add-paths: |
|
||||
protobufs
|
||||
src/mesh
|
||||
|
||||
+1
-29
@@ -33,36 +33,8 @@ __pycache__
|
||||
*~
|
||||
|
||||
venv/
|
||||
.venv/
|
||||
release/
|
||||
.vscode/extensions.json
|
||||
/compile_commands.json
|
||||
src/mesh/raspihttp/certificate.pem
|
||||
src/mesh/raspihttp/private_key.pem
|
||||
|
||||
# Ignore logo (set at build time with platformio-custom.py)
|
||||
data/boot/logo.*
|
||||
|
||||
# pioarduino platform
|
||||
managed_components/*
|
||||
arduino-lib-builder*
|
||||
dependencies.lock
|
||||
|
||||
# JLink / RTT debug artifacts (nRF SoCs)
|
||||
flash.jlink
|
||||
rtt_*.txt
|
||||
idf_component.yml
|
||||
CMakeLists.txt
|
||||
/sdkconfig.*
|
||||
.dummy/*
|
||||
|
||||
# PYTHONPATH used by the Nix shell
|
||||
.python3
|
||||
.claude/scheduled_tasks.lock
|
||||
userPrefs.jsonc.mcp-session-bak
|
||||
|
||||
# Fake-NodeDB fixture pipeline (bin/regen-fake-nodedbs.sh)
|
||||
# JSONL seeds are committed (test/fixtures/nodedb/seed_v25_*.jsonl);
|
||||
# compiled .proto outputs are ephemeral build artifacts.
|
||||
build/fixtures/
|
||||
bin/_generated/
|
||||
src/mesh/raspihttp/private_key.pem
|
||||
@@ -1,11 +0,0 @@
|
||||
{
|
||||
"mcpServers": {
|
||||
"meshtastic": {
|
||||
"command": "./mcp-server/.venv/bin/python",
|
||||
"args": ["-m", "meshtastic_mcp"],
|
||||
"env": {
|
||||
"MESHTASTIC_FIRMWARE_ROOT": "."
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
+1
-27
@@ -1,28 +1,2 @@
|
||||
[bandit]
|
||||
# Rule IDs: https://bandit.readthedocs.io/en/latest/plugins/index.html
|
||||
#
|
||||
# B101 assert_used
|
||||
# pytest assertions + internal invariants; required for pytest.
|
||||
# B110 try_except_pass
|
||||
# best-effort cleanup paths (atexit handlers, pubsub unsubscribe,
|
||||
# session-end file close, socket shutdown). Logging inside the
|
||||
# except block would be worse than the silent pass — teardown is
|
||||
# already at end-of-session and the surrounding caller has context.
|
||||
# B112 try_except_continue
|
||||
# defensive loops over flaky sources (pubsub handlers, device
|
||||
# re-enumeration polls). One failed iteration shouldn't abort the loop.
|
||||
# B404 import_subprocess
|
||||
# mcp-server wraps PlatformIO, esptool, nrfutil, picotool, and the
|
||||
# pytest test-runner — subprocess is a load-bearing import here, not
|
||||
# a smell. The "consider possible security implications" advisory is
|
||||
# redundant given the file-level review already applied.
|
||||
# B603 subprocess_without_shell_equals_true
|
||||
# all subprocess calls use a static argv list; `shell=False` is the
|
||||
# default and we never string-interpolate user input into the command.
|
||||
# B606 start_process_with_no_shell
|
||||
# same invariant as B603 — running a binary via argv list (not
|
||||
# `shell=True`) is the safe pattern bandit is asking for.
|
||||
#
|
||||
# Higher-severity checks (B102 exec_used, B301 pickle, B307 eval,
|
||||
# B602 shell=True, etc.) remain enabled.
|
||||
skips = B101,B110,B112,B404,B603,B606
|
||||
skips = B101
|
||||
@@ -8,4 +8,3 @@ line_length: false
|
||||
spaces: false
|
||||
url: false
|
||||
whitespace: false
|
||||
headings: false
|
||||
|
||||
@@ -1 +0,0 @@
|
||||
renovate.json
|
||||
@@ -1,10 +0,0 @@
|
||||
{
|
||||
"overrides": [
|
||||
{
|
||||
"files": "userPrefs.jsonc",
|
||||
"options": {
|
||||
"trailingComma": "none"
|
||||
}
|
||||
}
|
||||
]
|
||||
}
|
||||
+25
-30
@@ -1,51 +1,46 @@
|
||||
version: 0.1
|
||||
cli:
|
||||
version: 1.25.0
|
||||
version: 1.22.8
|
||||
plugins:
|
||||
sources:
|
||||
- id: trunk
|
||||
ref: v1.10.0
|
||||
ref: v1.6.6
|
||||
uri: https://github.com/trunk-io/plugins
|
||||
lint:
|
||||
enabled:
|
||||
- checkov@3.2.529
|
||||
- renovate@43.150.0
|
||||
- prettier@3.8.3
|
||||
- trufflehog@3.95.3
|
||||
- yamllint@1.38.0
|
||||
- bandit@1.9.4
|
||||
- trivy@0.70.0
|
||||
- taplo@0.10.0
|
||||
- ruff@0.15.13
|
||||
- isort@8.0.1
|
||||
- markdownlint@0.48.0
|
||||
- oxipng@10.1.1
|
||||
- svgo@4.0.1
|
||||
- actionlint@1.7.12
|
||||
- flake8@7.3.0
|
||||
- hadolint@2.14.0
|
||||
- prettier@3.4.2
|
||||
- trufflehog@3.86.1
|
||||
- yamllint@1.35.1
|
||||
- bandit@1.8.0
|
||||
- checkov@3.2.334
|
||||
- terrascan@1.19.9
|
||||
- trivy@0.58.0
|
||||
#- trufflehog@3.63.2-rc0
|
||||
- taplo@0.9.3
|
||||
- ruff@0.8.3
|
||||
- isort@5.13.2
|
||||
- markdownlint@0.43.0
|
||||
- oxipng@9.1.3
|
||||
- svgo@3.3.2
|
||||
- actionlint@1.7.4
|
||||
- flake8@7.1.1
|
||||
- hadolint@2.12.1-beta
|
||||
- shfmt@3.6.0
|
||||
- shellcheck@0.11.0
|
||||
- black@26.5.1
|
||||
- shellcheck@0.10.0
|
||||
- black@24.10.0
|
||||
- git-diff-check
|
||||
- gitleaks@8.30.1
|
||||
- gitleaks@8.21.2
|
||||
- clang-format@16.0.3
|
||||
#- prettier@3.3.3
|
||||
ignore:
|
||||
- linters: [ALL]
|
||||
paths:
|
||||
- bin/**
|
||||
# Fake-NodeDB fixture JSONL files contain deterministic synthetic
|
||||
# public_key_hex (64-char hex) values that gitleaks misidentifies as
|
||||
# generic-api-key. These are not secrets — they're test fixtures
|
||||
# produced by bin/gen-fake-nodedb-seed.py with a fixed RNG seed.
|
||||
- linters: [gitleaks]
|
||||
paths:
|
||||
- test/fixtures/nodedb/seed_v25_*.jsonl
|
||||
runtimes:
|
||||
enabled:
|
||||
- python@3.14.4
|
||||
- python@3.10.8
|
||||
- go@1.21.0
|
||||
- node@22.16.0
|
||||
- node@18.20.5
|
||||
actions:
|
||||
disabled:
|
||||
- trunk-announce
|
||||
|
||||
Vendored
+4
-4
@@ -1,10 +1,10 @@
|
||||
{
|
||||
// See http://go.microsoft.com/fwlink/?LinkId=827846
|
||||
// for the documentation about the extensions.json format
|
||||
"recommendations": [
|
||||
"Jason2866.esp-decoder",
|
||||
"pioarduino.pioarduino-ide"
|
||||
"platformio.platformio-ide"
|
||||
],
|
||||
"unwantedRecommendations": [
|
||||
"ms-vscode.cpptools-extension-pack",
|
||||
"platformio.platformio-ide"
|
||||
"ms-vscode.cpptools-extension-pack"
|
||||
]
|
||||
}
|
||||
|
||||
Vendored
-3
@@ -7,8 +7,5 @@
|
||||
"cmake.configureOnOpen": false,
|
||||
"[cpp]": {
|
||||
"editor.defaultFormatter": "trunk.io"
|
||||
},
|
||||
"[powershell]": {
|
||||
"editor.defaultFormatter": "ms-vscode.powershell"
|
||||
}
|
||||
}
|
||||
|
||||
@@ -1,144 +0,0 @@
|
||||
# Agent instructions
|
||||
|
||||
This repository is the [Meshtastic](https://meshtastic.org) firmware — a C++17 embedded codebase targeting ESP32 / nRF52 / RP2040 / STM32WL / Linux-Portduino LoRa mesh radios — plus a Python MCP server in `mcp-server/` that AI agents use to flash, configure, and test connected devices.
|
||||
|
||||
## Primary instruction file
|
||||
|
||||
**Read `.github/copilot-instructions.md` first.** That file is the canonical agent-facing document for this repo. It covers project layout, coding conventions (naming, module framework, Observer pattern, thread safety), the build system, CI/CD, the native C++ test suite, and — most importantly for automation work — the **MCP Server & Hardware Test Harness** section. Read it top-to-bottom before starting any non-trivial change.
|
||||
|
||||
This file (`AGENTS.md`) is a short pointer + quick reference for agents that don't read `.github/copilot-instructions.md` by default.
|
||||
|
||||
## Quick command reference
|
||||
|
||||
| Action | Command |
|
||||
| -------------------------------- | ------------------------------------------------------------------------------------------------------------- |
|
||||
| Build a firmware variant | `pio run -e <env>` (e.g. `pio run -e rak4631`, `pio run -e heltec-v3`) |
|
||||
| Build native macOS host binary | `pio run -e native-macos` (Homebrew prereqs + CH341 LoRa setup in `variants/native/portduino/platformio.ini`) |
|
||||
| Clean + rebuild | `pio run -e <env> -t clean && pio run -e <env>` |
|
||||
| Flash a device | `pio run -e <env> -t upload --upload-port <port>` (or use the `pio_flash` MCP tool) |
|
||||
| Run firmware unit tests (native) | `pio test -e native` |
|
||||
| Run MCP hardware tests | `./mcp-server/run-tests.sh` |
|
||||
| Live TUI test runner | `mcp-server/.venv/bin/meshtastic-mcp-test-tui` |
|
||||
| Format before commit | `trunk fmt` |
|
||||
| Regenerate protobuf bindings | `bin/regen-protos.sh` |
|
||||
| Generate CI matrix | `./bin/generate_ci_matrix.py all [--level pr]` |
|
||||
|
||||
## MCP server (device + test automation)
|
||||
|
||||
The `mcp-server/` package exposes ~32 MCP tools for device discovery, building, flashing, serial monitoring, and live-node administration. Tools are grouped as:
|
||||
|
||||
- **Discovery**: `list_devices`, `list_boards`, `get_board`
|
||||
- **Build & flash**: `build`, `clean`, `pio_flash`, `erase_and_flash` (ESP32 factory), `update_flash` (ESP32 OTA), `touch_1200bps`
|
||||
- **Serial sessions**: `serial_open`, `serial_read`, `serial_list`, `serial_close`
|
||||
- **Device reads**: `device_info`, `list_nodes`
|
||||
- **Device writes** (require `confirm=True`): `set_owner`, `get_config`, `set_config`, `get_channel_url`, `set_channel_url`, `send_text`, `reboot`, `shutdown`, `factory_reset`, `set_debug_log_api`
|
||||
- **userPrefs admin**: `userprefs_get`, `userprefs_set`, `userprefs_reset`, `userprefs_manifest`, `userprefs_testing_profile`
|
||||
- **Vendor escape hatches**: `esptool_*`, `nrfutil_*`, `picotool_*`
|
||||
|
||||
Setup: `cd mcp-server && python3 -m venv .venv && .venv/bin/pip install -e '.[test]'`. The repo registers the server via `.mcp.json` — Claude Code picks it up automatically.
|
||||
|
||||
See `mcp-server/README.md` for argument shapes and the **MCP Server & Hardware Test Harness** section of `.github/copilot-instructions.md` for agent usage rules (tool surface, fixture contract, firmware integration points, recovery playbooks).
|
||||
|
||||
## Slash commands (AI-assisted workflows)
|
||||
|
||||
Three test-and-diagnose workflows exist as slash commands:
|
||||
|
||||
- **`/test` (Claude Code) / `/mcp-test` (Copilot)** — run the hardware test suite and interpret failures
|
||||
- **`/diagnose` / `/mcp-diagnose`** — read-only device health report
|
||||
- **`/repro` / `/mcp-repro`** — flakiness triage: re-run one test N times, diff firmware logs between passes and failures
|
||||
|
||||
Bodies live in `.claude/commands/` and `.github/prompts/` respectively. `.claude/commands/README.md` is the index.
|
||||
|
||||
## Encryption at a glance
|
||||
|
||||
Two layers, both in `src/mesh/CryptoEngine.cpp`:
|
||||
|
||||
- **Channel (symmetric)** — **AES-CTR** with a channel-wide PSK (AES-128 or AES-256). Nonce = packet_id ‖ from_node ‖ block_counter. No AEAD; integrity is soft (channel-hash filter). The well-known default PSK lives in `src/mesh/Channels.h`; a 1-byte PSK is a short-form index into it.
|
||||
- **Per-peer PKI** — **X25519 ECDH** (Curve25519, 32-byte keys) → SHA-256 → **AES-256-CCM** with an 8-byte MAC. Fresh 32-bit `extraNonce` per packet, sent in the clear alongside the MAC. 12-byte wire overhead (`MESHTASTIC_PKC_OVERHEAD`). Used for DMs. Also used for remote admin (`src/modules/AdminModule.cpp`), where AdminMessage authorization is gated by `config.security.admin_key[0..2]`. Disabled entirely in Ham mode (`user.is_licensed=true`).
|
||||
|
||||
Key rotation to never trigger casually: only the **full** factory reset (`factory_reset_device`, `eraseBleBonds=true`) wipes `security.private_key` and regenerates the keypair — every peer holds the old public key, so DMs silently fail PKI decrypt until NodeInfo re-exchanges. The **partial** config reset (`factory_reset_config`) preserves the private key and doesn't invalidate peer relationships. Explicitly blanking `security.private_key` via admin also triggers regen. See the **Encryption & Key Management** section of `.github/copilot-instructions.md` for the full spec (nonce layout, send/receive selection logic including infrastructure-portnum exceptions, admin-key + session-passkey authorization, `is_managed` scope, key-rotation hazards).
|
||||
|
||||
## House rules
|
||||
|
||||
- **No destructive device operations without operator approval.** `factory_reset`, `erase_and_flash`, `reboot`, `shutdown`, history-rewriting git ops — describe the action and stop. Operator authorizes.
|
||||
- **One MCP call per serial port at a time.** The port lock is exclusive; concurrent calls deadlock. Sequence: open → read/mutate → close, then next device.
|
||||
- **`userPrefs.jsonc` is session state during tests.** The `_session_userprefs` fixture snapshots + restores it; never edit it from inside a test.
|
||||
- **Don't speculate about firmware root causes.** When evidence doesn't support a classification, say "unknown" and list what would disambiguate.
|
||||
- **Run `trunk fmt` before proposing a commit.** The `trunk_check` CI gate will reject unformatted code.
|
||||
- **`confirm=True` on destructive MCP tools is a real gate, not a formality.** Don't bypass it via auto-approve settings.
|
||||
- **Keep code comments minimal — one or two lines, max.** Comment only when the _why_ isn't obvious from the code; never restate what the next line does. No multi-paragraph block comments explaining straightforward changes. The diff and commit message carry the rationale; the code carries the behavior.
|
||||
- **Use `Throttle` for time-based rate limiting, not raw `millis()` math.** `src/mesh/Throttle.h` provides `Throttle::isWithinTimespanMs(lastMs, intervalMs)` (returns true while inside the cooldown) and `Throttle::execute(&lastMs, intervalMs, func)` (function-pointer form that updates the timestamp on fire). Use these for any "did N ms pass since X" check — raw `millis() > lastMs + N` is rollover-unsafe (breaks after ~49.7 days) and inconsistent with the rest of the codebase. The helpers compute `now - lastMs` with unsigned subtraction, which wraps correctly.
|
||||
|
||||
## Typical agent workflows
|
||||
|
||||
### Flashing a device
|
||||
|
||||
1. `list_devices` → find the port + likely VID
|
||||
2. `list_boards` → confirm the env, or use the known default for the hardware
|
||||
3. `pio_flash(env=..., port=..., confirm=True)` for any arch, or `erase_and_flash(env=..., port=..., confirm=True)` for an ESP32 factory install
|
||||
|
||||
### Inspecting live node state
|
||||
|
||||
1. `device_info(port=...)` — short summary (node num, firmware version, region, peer count)
|
||||
2. `list_nodes(port=...)` — full peer table (SNR, RSSI, pubkey presence, last_heard)
|
||||
3. `get_config(section="lora", port=...)` — LoRa settings for cross-device comparison
|
||||
|
||||
Sequence these; don't parallelize on the same port.
|
||||
|
||||
### Testing a firmware change
|
||||
|
||||
1. Build locally: `pio run -e <env>`
|
||||
2. Flash the test device: `pio_flash(env=..., port=..., confirm=True)`
|
||||
3. Run the suite: `./mcp-server/run-tests.sh tests/<tier>` or `/test tests/<tier>`
|
||||
4. On failure, open `mcp-server/tests/report.html` → `Meshtastic debug` section for the firmware log tail + device state dump
|
||||
5. Iterate
|
||||
|
||||
### Debugging a flaky test
|
||||
|
||||
1. `/repro <test-node-id> [count]` — re-runs the test N times, diffs firmware logs between passes and failures
|
||||
2. If the first attempt always fails and the rest pass, that's a state-leak pattern → suggest `--force-bake` or a clean device state, don't chase the first failure
|
||||
3. If all N fail, this isn't a flake — it's a regression. Stop iterating and escalate to `/test` for full-suite context.
|
||||
|
||||
## Where to look
|
||||
|
||||
| Path | What's there |
|
||||
| --------------------------------- | ------------------------------------------------------------------------------------------------------------------------ |
|
||||
| `src/` | Firmware C++ source (`mesh/`, `modules/`, `platform/`, `graphics/`, `gps/`, `motion/`, `mqtt/`, …) |
|
||||
| `src/mesh/` | Core: NodeDB, Router, Channels, CryptoEngine, radio interfaces, StreamAPI, PhoneAPI |
|
||||
| `src/modules/` | Feature modules; `Telemetry/Sensor/` has 50+ I2C sensor drivers |
|
||||
| `variants/` | 200+ hardware variant definitions (`variant.h` + `platformio.ini` per board) |
|
||||
| `protobufs/` | `.proto` definitions; regenerate with `bin/regen-protos.sh` |
|
||||
| `test/` | Firmware unit tests (12 suites; `pio test -e native`) |
|
||||
| `mcp-server/` | Python MCP server + pytest hardware integration tests |
|
||||
| `mcp-server/tests/` | Tiered pytest suite: `unit/`, `mesh/`, `telemetry/`, `monitor/`, `recovery/`, `ui/`, `fleet/`, `admin/`, `provisioning/` |
|
||||
| `.claude/commands/` | Claude Code slash command bodies |
|
||||
| `.github/prompts/` | Copilot prompt bodies (mirrors of the Claude Code ones) |
|
||||
| `.github/copilot-instructions.md` | **Primary agent instructions — read this** |
|
||||
| `.github/workflows/` | CI pipelines |
|
||||
| `.mcp.json` | MCP server registration for Claude Code |
|
||||
|
||||
## Recovery one-liners
|
||||
|
||||
- **`userPrefs.jsonc` dirty after a test run?** Re-run `./mcp-server/run-tests.sh` once (pre-flight self-heals from the sidecar). If still dirty: `git checkout userPrefs.jsonc`.
|
||||
- **nRF52 not responding?** `mcp__meshtastic__touch_1200bps(port=...)` drops it into the DFU bootloader, then `pio_flash` re-installs.
|
||||
- **Device fully wedged (no DFU)?** `mcp__meshtastic__uhubctl_cycle(role="nrf52", confirm=True)` hard-power-cycles it via USB hub PPPS. Needs `uhubctl` installed (`brew install uhubctl` / `apt install uhubctl`); on Linux without udev rules, permission errors fail fast, so use `sudo uhubctl` yourself or configure udev access.
|
||||
- **Port busy?** `lsof <port>` to find the holder. Usually a stale `pio device monitor` or zombie `meshtastic_mcp` process. Kill it.
|
||||
- **Multiple MCP servers running?** `ps aux | grep meshtastic_mcp` — zombies hold ports. Kill all but the one your host spawned.
|
||||
- **macOS: `LIBUSB_ERROR_BUSY` on a CH341 LoRa adapter?** A third-party WCH `CH34xVCPDriver` is claiming interface 0. Find the bundle ID with `ioreg -p IOUSB -l -w 0 | grep -B2 -A30 0x5512`, then `sudo kmutil unload -b <bundleID>`. Apple's bundled CH34x kext targets the CH340 UART (PID 0x7523), not the SPI bridge — it's never the culprit.
|
||||
|
||||
## Environment variables (test harness)
|
||||
|
||||
| Var | Purpose |
|
||||
| ------------------------------------ | ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
|
||||
| `MESHTASTIC_MCP_ENV_<ROLE>` | Override PlatformIO env for a role (e.g. `MESHTASTIC_MCP_ENV_NRF52=rak4631-dap`). Default map: `nrf52→rak4631`, `esp32s3→heltec-v3`. |
|
||||
| `MESHTASTIC_MCP_SEED` | PSK seed for the session test profile. Defaults to `mcp-<user>-<host>`. |
|
||||
| `MESHTASTIC_MCP_FLASH_LOG` | File path to tee pio/esptool/nrfutil/picotool output. `run-tests.sh` sets this to `tests/flash.log` so the TUI can stream live flash progress. |
|
||||
| `MESHTASTIC_MCP_TCP_HOST` | `host` or `host:port` of a `meshtasticd` daemon (e.g. the `native-macos` build). Surfaces it in `list_devices` as `tcp://host:port` so `connect()`-based tools target it transparently. Default port 4403. |
|
||||
| `MESHTASTIC_UHUBCTL_BIN` | Absolute path to `uhubctl` binary. Default: PATH lookup. |
|
||||
| `MESHTASTIC_UHUBCTL_LOCATION_<ROLE>` | Pin a role to a specific uhubctl hub location (e.g. `1-1.3`). Wins over VID auto-detection — use when multiple devices share a VID. |
|
||||
| `MESHTASTIC_UHUBCTL_PORT_<ROLE>` | Pin a role to a specific hub port number. Required alongside `LOCATION_<ROLE>`. |
|
||||
| `MESHTASTIC_UI_CAMERA_BACKEND` | Camera backend for UI tier + `capture_screen` tool: `opencv` / `ffmpeg` / `null` / `auto` (default). |
|
||||
| `MESHTASTIC_UI_CAMERA_DEVICE` | Generic camera device (index or path). Used by the UI tier when no per-role var is set. |
|
||||
| `MESHTASTIC_UI_CAMERA_DEVICE_<ROLE>` | Per-role camera pinning (e.g. `MESHTASTIC_UI_CAMERA_DEVICE_ESP32S3=0` for the OLED-bearing heltec-v3). |
|
||||
| `MESHTASTIC_UI_OCR_BACKEND` | OCR engine selection: `easyocr` / `pytesseract` / `null` / `auto` (default). |
|
||||
| `MESHTASTIC_UI_TUI_CAMERA` | Set to `1` to mount the live camera-feed panel in `meshtastic-mcp-test-tui`. |
|
||||
+18
-42
@@ -1,69 +1,47 @@
|
||||
# trunk-ignore-all(terrascan/AC_DOCKER_0002): Known terrascan issue
|
||||
# trunk-ignore-all(hadolint/DL3008): Use latest version of apt packages for buildchain
|
||||
# trunk-ignore-all(trivy/DS002): We must run as root for this container
|
||||
# trunk-ignore-all(checkov/CKV_DOCKER_8): We must run as root for this container
|
||||
# trunk-ignore-all(hadolint/DL3002): We must run as root for this container
|
||||
# trunk-ignore-all(hadolint/DL3008): Do not pin apt package versions
|
||||
# trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
|
||||
|
||||
FROM debian:trixie AS builder
|
||||
ARG PIO_ENV=native
|
||||
FROM python:3.12-bookworm AS builder
|
||||
ENV DEBIAN_FRONTEND=noninteractive
|
||||
ENV TZ=Etc/UTC
|
||||
|
||||
# Install Dependencies
|
||||
ENV PIP_ROOT_USER_ACTION=ignore
|
||||
ENV PIP_BREAK_SYSTEM_PACKAGES=1
|
||||
RUN apt-get update && apt-get install --no-install-recommends -y \
|
||||
curl wget g++ zip git ca-certificates pkg-config \
|
||||
python3-pip python3-grpc-tools \
|
||||
libgpiod-dev libyaml-cpp-dev libbluetooth-dev libi2c-dev libuv1-dev \
|
||||
libusb-1.0-0-dev libulfius-dev liborcania-dev libssl-dev \
|
||||
libx11-dev libinput-dev libxkbcommon-x11-dev libsqlite3-dev libsdl2-dev \
|
||||
&& apt-get clean && rm -rf /var/lib/apt/lists/* \
|
||||
&& pip install --no-cache-dir -U platformio \
|
||||
&& mkdir /tmp/firmware
|
||||
RUN apt-get update && apt-get install --no-install-recommends -y wget g++ zip git ca-certificates \
|
||||
libgpiod-dev libyaml-cpp-dev libbluetooth-dev libi2c-dev \
|
||||
libusb-1.0-0-dev libulfius-dev liborcania-dev libssl-dev pkg-config && \
|
||||
apt-get clean && rm -rf /var/lib/apt/lists/* && \
|
||||
pip install --no-cache-dir -U platformio==6.1.16 && \
|
||||
mkdir /tmp/firmware
|
||||
|
||||
# Copy source code
|
||||
WORKDIR /tmp/firmware
|
||||
COPY . /tmp/firmware
|
||||
|
||||
# Build
|
||||
RUN bash ./bin/build-native.sh "$PIO_ENV" && \
|
||||
RUN bash ./bin/build-native.sh && \
|
||||
cp "/tmp/firmware/release/meshtasticd_linux_$(uname -m)" "/tmp/firmware/release/meshtasticd"
|
||||
|
||||
# Fetch web assets
|
||||
RUN curl -L "https://github.com/meshtastic/web/releases/download/v$(cat /tmp/firmware/bin/web.version)/build.tar" -o /tmp/web.tar \
|
||||
&& mkdir -p /tmp/web \
|
||||
&& tar -xf /tmp/web.tar -C /tmp/web/ \
|
||||
&& gzip -dr /tmp/web \
|
||||
&& rm /tmp/web.tar
|
||||
|
||||
##### PRODUCTION BUILD #############
|
||||
|
||||
FROM debian:trixie-slim
|
||||
LABEL org.opencontainers.image.title="Meshtastic" \
|
||||
org.opencontainers.image.description="Debian Meshtastic daemon and web interface" \
|
||||
org.opencontainers.image.url="https://meshtastic.org" \
|
||||
org.opencontainers.image.documentation="https://meshtastic.org/docs/" \
|
||||
org.opencontainers.image.authors="Meshtastic" \
|
||||
org.opencontainers.image.licenses="GPL-3.0-or-later" \
|
||||
org.opencontainers.image.source="https://github.com/meshtastic/firmware/"
|
||||
FROM debian:bookworm-slim
|
||||
ENV DEBIAN_FRONTEND=noninteractive
|
||||
ENV TZ=Etc/UTC
|
||||
|
||||
# nosemgrep: dockerfile.security.last-user-is-root.last-user-is-root
|
||||
USER root
|
||||
|
||||
RUN apt-get update && apt-get --no-install-recommends -y install \
|
||||
libc-bin libc6 libgpiod3 libyaml-cpp0.8 libi2c0 libuv1t64 libusb-1.0-0-dev \
|
||||
liborcania2.3 libulfius2.7t64 libssl3t64 \
|
||||
libx11-6 libinput10 libxkbcommon-x11-0 libsdl2-2.0-0 \
|
||||
&& apt-get clean && rm -rf /var/lib/apt/lists/* \
|
||||
RUN apt-get update && apt-get --no-install-recommends -y install libc-bin libc6 libgpiod2 libyaml-cpp0.7 libi2c0 libulfius2.7 libusb-1.0-0-dev liborcania2.3 libssl3 && \
|
||||
apt-get clean && rm -rf /var/lib/apt/lists/* \
|
||||
&& mkdir -p /var/lib/meshtasticd \
|
||||
&& mkdir -p /etc/meshtasticd/config.d \
|
||||
&& mkdir -p /etc/meshtasticd/ssl
|
||||
&& mkdir -p /etc/meshtasticd/config.d
|
||||
|
||||
# Fetch compiled binary from the builder
|
||||
COPY --from=builder /tmp/firmware/release/meshtasticd /usr/bin/
|
||||
COPY --from=builder /tmp/web /usr/share/meshtasticd/web/
|
||||
COPY --from=builder /tmp/firmware/release/meshtasticd /usr/sbin/
|
||||
# Copy config templates
|
||||
COPY ./bin/config.d /etc/meshtasticd/available.d
|
||||
|
||||
@@ -72,9 +50,7 @@ VOLUME /var/lib/meshtasticd
|
||||
|
||||
# Expose Meshtastic TCP API port from the host
|
||||
EXPOSE 4403
|
||||
# Expose Meshtastic Web UI port from the host
|
||||
EXPOSE 9443
|
||||
|
||||
CMD [ "sh", "-cx", "meshtasticd --fsdir=/var/lib/meshtasticd" ]
|
||||
CMD [ "sh", "-cx", "meshtasticd -d /var/lib/meshtasticd" ]
|
||||
|
||||
HEALTHCHECK NONE
|
||||
HEALTHCHECK NONE
|
||||
@@ -1,26 +0,0 @@
|
||||
# Lightweight container for running native PlatformIO tests on non-Linux hosts
|
||||
FROM python:3.14-slim-trixie
|
||||
|
||||
ENV DEBIAN_FRONTEND=noninteractive
|
||||
ENV PIP_ROOT_USER_ACTION=ignore
|
||||
|
||||
# hadolint ignore=DL3008
|
||||
RUN apt-get update && apt-get install --no-install-recommends -y \
|
||||
g++ git ca-certificates pkg-config \
|
||||
libgpiod-dev libyaml-cpp-dev libbluetooth-dev libi2c-dev libuv1-dev \
|
||||
libusb-1.0-0-dev libulfius-dev liborcania-dev libssl-dev \
|
||||
libx11-dev libinput-dev libxkbcommon-x11-dev libsqlite3-dev libsdl2-dev \
|
||||
&& apt-get clean && rm -rf /var/lib/apt/lists/* \
|
||||
&& pip install --no-cache-dir platformio==6.1.19 \
|
||||
&& useradd --create-home --shell /usr/sbin/nologin meshtastic
|
||||
|
||||
WORKDIR /firmware
|
||||
RUN chown -R meshtastic:meshtastic /firmware
|
||||
|
||||
HEALTHCHECK --interval=30s --timeout=5s --start-period=10s --retries=3 \
|
||||
CMD platformio --version || exit 1
|
||||
|
||||
USER meshtastic
|
||||
|
||||
# Run tests by default; override with docker run args for specific filters
|
||||
CMD ["platformio", "test", "-e", "coverage", "-v"]
|
||||
@@ -1,7 +1,4 @@
|
||||
<div align="center" markdown="1">
|
||||
|
||||
<img src=".github/meshtastic_logo.png" alt="Meshtastic Logo" width="80"/>
|
||||
<h1>Meshtastic Firmware</h1>
|
||||
# Meshtastic Firmware
|
||||
|
||||
|
||||
[](https://github.com/meshtastic/firmware/actions/workflows/ci.yml)
|
||||
@@ -9,31 +6,13 @@
|
||||
[](https://opencollective.com/meshtastic/)
|
||||
[](https://vercel.com?utm_source=meshtastic&utm_campaign=oss)
|
||||
|
||||
<a href="https://trendshift.io/repositories/5524" target="_blank"><img src="https://trendshift.io/api/badge/repositories/5524" alt="meshtastic%2Ffirmware | Trendshift" style="width: 250px; height: 55px;" width="250" height="55"/></a>
|
||||
|
||||
</div>
|
||||
|
||||
</div>
|
||||
|
||||
<div align="center">
|
||||
<a href="https://meshtastic.org">Website</a>
|
||||
-
|
||||
<a href="https://meshtastic.org/docs/">Documentation</a>
|
||||
</div>
|
||||
|
||||
## Overview
|
||||
|
||||
This repository contains the official device firmware for Meshtastic, an open-source LoRa mesh networking project designed for long-range, low-power communication without relying on internet or cellular infrastructure. The firmware supports various hardware platforms, including ESP32, nRF52, RP2040/RP2350, and Linux-based devices.
|
||||
This repository contains the device firmware for the Meshtastic project.
|
||||
|
||||
Meshtastic enables text messaging, location sharing, and telemetry over a decentralized mesh network, making it ideal for outdoor adventures, emergency preparedness, and remote operations.
|
||||
|
||||
### Get Started
|
||||
|
||||
- 🔧 **[Building Instructions](https://meshtastic.org/docs/development/firmware/build)** – Learn how to compile the firmware from source.
|
||||
- ⚡ **[Flashing Instructions](https://meshtastic.org/docs/getting-started/flashing-firmware/)** – Install or update the firmware on your device.
|
||||
|
||||
Join our community and help improve Meshtastic! 🚀
|
||||
- **[Building Instructions](https://meshtastic.org/docs/development/firmware/build)**
|
||||
- **[Flashing Instructions](https://meshtastic.org/docs/getting-started/flashing-firmware/)**
|
||||
|
||||
## Stats
|
||||
|
||||
|
||||
|
||||
|
||||
+2
-2
@@ -4,8 +4,8 @@
|
||||
|
||||
| Firmware Version | Supported |
|
||||
| ---------------- | ------------------ |
|
||||
| 2.7.x | :white_check_mark: |
|
||||
| <= 2.6.x | :x: |
|
||||
| 2.5.x | :white_check_mark: |
|
||||
| <= 2.4.x | :x: |
|
||||
|
||||
## Reporting a Vulnerability
|
||||
|
||||
|
||||
+12
-40
@@ -1,27 +1,14 @@
|
||||
# trunk-ignore-all(trivy/DS002): We must run as root for this container
|
||||
# trunk-ignore-all(checkov/CKV_DOCKER_8): We must run as root for this container
|
||||
# trunk-ignore-all(hadolint/DL3002): We must run as root for this container
|
||||
# trunk-ignore-all(hadolint/DL3018): Do not pin apk package versions
|
||||
# trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
|
||||
|
||||
# Ensure the Alpine version is updated in both stages of the container!
|
||||
FROM alpine:3.23 AS builder
|
||||
ARG PIO_ENV=native
|
||||
FROM python:3.12-alpine3.21 AS builder
|
||||
|
||||
# Enable Alpine community repository (for 'py3-grpcio-tools')
|
||||
RUN echo "https://dl-cdn.alpinelinux.org/alpine/v$(cut -d. -f1,2 /etc/alpine-release)/community" >> /etc/apk/repositories
|
||||
|
||||
# Install Dependencies
|
||||
ENV PIP_ROOT_USER_ACTION=ignore
|
||||
ENV PIP_BREAK_SYSTEM_PACKAGES=1
|
||||
RUN apk --no-cache add \
|
||||
bash g++ libstdc++-dev linux-headers zip git ca-certificates libbsd-dev \
|
||||
py3-pip py3-grpcio-tools \
|
||||
libgpiod-dev yaml-cpp-dev bluez-dev \
|
||||
libusb-dev i2c-tools-dev libuv-dev openssl-dev pkgconf argp-standalone \
|
||||
libx11-dev libinput-dev libxkbcommon-dev sqlite-dev sdl2-dev \
|
||||
&& rm -rf /var/cache/apk/* \
|
||||
&& pip install --no-cache-dir -U platformio \
|
||||
&& mkdir /tmp/firmware
|
||||
RUN apk add bash g++ libstdc++-dev linux-headers zip git ca-certificates libgpiod-dev yaml-cpp-dev bluez-dev \
|
||||
libusb-dev i2c-tools-dev openssl-dev pkgconf argp-standalone && \
|
||||
pip install --no-cache-dir -U platformio==6.1.16 && \
|
||||
mkdir /tmp/firmware
|
||||
|
||||
WORKDIR /tmp/firmware
|
||||
COPY . /tmp/firmware
|
||||
@@ -30,35 +17,20 @@ COPY . /tmp/firmware
|
||||
# Add `argp` for musl
|
||||
ENV PLATFORMIO_BUILD_FLAGS="-Os -ffunction-sections -fdata-sections -Wl,--gc-sections -largp"
|
||||
|
||||
RUN bash ./bin/build-native.sh "$PIO_ENV" && \
|
||||
RUN bash ./bin/build-native.sh && \
|
||||
cp "/tmp/firmware/release/meshtasticd_linux_$(uname -m)" "/tmp/firmware/release/meshtasticd"
|
||||
|
||||
# ##### PRODUCTION BUILD #############
|
||||
|
||||
FROM alpine:3.23
|
||||
LABEL org.opencontainers.image.title="Meshtastic" \
|
||||
org.opencontainers.image.description="Alpine Meshtastic daemon" \
|
||||
org.opencontainers.image.url="https://meshtastic.org" \
|
||||
org.opencontainers.image.documentation="https://meshtastic.org/docs/" \
|
||||
org.opencontainers.image.authors="Meshtastic" \
|
||||
org.opencontainers.image.licenses="GPL-3.0-or-later" \
|
||||
org.opencontainers.image.source="https://github.com/meshtastic/firmware/"
|
||||
FROM alpine:3.21
|
||||
|
||||
# nosemgrep: dockerfile.security.last-user-is-root.last-user-is-root
|
||||
USER root
|
||||
|
||||
RUN apk --no-cache add \
|
||||
shadow libstdc++ libbsd libgpiod yaml-cpp libusb \
|
||||
i2c-tools libuv libx11 libinput libxkbcommon sdl2 \
|
||||
&& rm -rf /var/cache/apk/* \
|
||||
RUN apk add libstdc++ libgpiod yaml-cpp libusb i2c-tools \
|
||||
&& mkdir -p /var/lib/meshtasticd \
|
||||
&& mkdir -p /etc/meshtasticd/config.d \
|
||||
&& mkdir -p /etc/meshtasticd/ssl
|
||||
|
||||
# Fetch compiled binary from the builder
|
||||
COPY --from=builder /tmp/firmware/release/meshtasticd /usr/bin/
|
||||
# Copy config templates
|
||||
COPY ./bin/config.d /etc/meshtasticd/available.d
|
||||
&& mkdir -p /etc/meshtasticd/config.d
|
||||
COPY --from=builder /tmp/firmware/release/meshtasticd /usr/sbin/
|
||||
|
||||
WORKDIR /var/lib/meshtasticd
|
||||
VOLUME /var/lib/meshtasticd
|
||||
@@ -67,4 +39,4 @@ EXPOSE 4403
|
||||
|
||||
CMD [ "sh", "-cx", "meshtasticd --fsdir=/var/lib/meshtasticd" ]
|
||||
|
||||
HEALTHCHECK NONE
|
||||
HEALTHCHECK NONE
|
||||
@@ -0,0 +1,68 @@
|
||||
; Common settings for ESP targes, mixin with extends = esp32_base
|
||||
[esp32_base]
|
||||
extends = arduino_base
|
||||
custom_esp32_kind = esp32
|
||||
platform = platformio/espressif32@6.9.0
|
||||
|
||||
build_src_filter =
|
||||
${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
|
||||
|
||||
upload_speed = 921600
|
||||
debug_init_break = tbreak setup
|
||||
monitor_filters = esp32_exception_decoder
|
||||
|
||||
board_build.filesystem = littlefs
|
||||
|
||||
# Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
|
||||
# See library directory for BLE logging possible values: .pio/libdeps/tbeam/NimBLE-Arduino/src/log_common/log_common.h
|
||||
# This overrides the BLE logging default of LOG_LEVEL_INFO (1) from: .pio/libdeps/tbeam/NimBLE-Arduino/src/esp_nimble_cfg.h
|
||||
build_unflags = -fno-lto
|
||||
build_flags =
|
||||
${arduino_base.build_flags}
|
||||
-flto
|
||||
-Wall
|
||||
-Wextra
|
||||
-Isrc/platform/esp32
|
||||
-std=c++11
|
||||
-DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG
|
||||
-DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
|
||||
-DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
|
||||
-DAXP_DEBUG_PORT=Serial
|
||||
-DCONFIG_BT_NIMBLE_ENABLED
|
||||
-DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
|
||||
-DCONFIG_BT_NIMBLE_MAX_CCCDS=20
|
||||
-DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=8192
|
||||
-DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
|
||||
-DSERIAL_BUFFER_SIZE=4096
|
||||
-DLIBPAX_ARDUINO
|
||||
-DLIBPAX_WIFI
|
||||
-DLIBPAX_BLE
|
||||
;-DDEBUG_HEAP
|
||||
|
||||
lib_deps =
|
||||
${arduino_base.lib_deps}
|
||||
${networking_base.lib_deps}
|
||||
${environmental_base.lib_deps}
|
||||
${radiolib_base.lib_deps}
|
||||
https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
|
||||
h2zero/NimBLE-Arduino@^1.4.2
|
||||
https://github.com/dbinfrago/libpax.git#3cdc0371c375676a97967547f4065607d4c53fd1
|
||||
lewisxhe/XPowersLib@^0.2.6
|
||||
https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
|
||||
rweather/Crypto@^0.4.0
|
||||
|
||||
lib_ignore =
|
||||
segger_rtt
|
||||
ESP32 BLE Arduino
|
||||
|
||||
; leave this commented out to avoid breaking Windows
|
||||
;upload_port = /dev/ttyUSB0
|
||||
;monitor_port = /dev/ttyUSB0
|
||||
|
||||
; Please don't delete these lines. JM uses them.
|
||||
;upload_port = /dev/cu.SLAB_USBtoUART
|
||||
;monitor_port = /dev/cu.SLAB_USBtoUART
|
||||
|
||||
; customize the partition table
|
||||
; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
|
||||
board_build.partitions = partition-table.csv
|
||||
@@ -0,0 +1,6 @@
|
||||
[esp32c3_base]
|
||||
extends = esp32_base
|
||||
custom_esp32_kind = esp32c3
|
||||
|
||||
monitor_speed = 115200
|
||||
monitor_filters = esp32_c3_exception_decoder
|
||||
@@ -0,0 +1,41 @@
|
||||
[esp32c6_base]
|
||||
extends = esp32_base
|
||||
platform = https://github.com/Jason2866/platform-espressif32.git#22faa566df8c789000f8136cd8d0aca49617af55
|
||||
build_flags =
|
||||
${arduino_base.build_flags}
|
||||
-Wall
|
||||
-Wextra
|
||||
-Isrc/platform/esp32
|
||||
-std=c++11
|
||||
-DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
|
||||
-DSERIAL_BUFFER_SIZE=4096
|
||||
-DLIBPAX_ARDUINO
|
||||
-DLIBPAX_WIFI
|
||||
-DLIBPAX_BLE
|
||||
-DMESHTASTIC_EXCLUDE_WEBSERVER
|
||||
;-DDEBUG_HEAP
|
||||
; TEMP
|
||||
-DHAS_BLUETOOTH=0
|
||||
-DMESHTASTIC_EXCLUDE_PAXCOUNTER
|
||||
-DMESHTASTIC_EXCLUDE_BLUETOOTH
|
||||
|
||||
lib_deps =
|
||||
${arduino_base.lib_deps}
|
||||
${networking_base.lib_deps}
|
||||
${environmental_base.lib_deps}
|
||||
${radiolib_base.lib_deps}
|
||||
lewisxhe/XPowersLib@^0.2.6
|
||||
https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
|
||||
rweather/Crypto@^0.4.0
|
||||
|
||||
build_src_filter =
|
||||
${esp32_base.build_src_filter} -<mesh/http>
|
||||
|
||||
monitor_speed = 460800
|
||||
monitor_filters = esp32_c3_exception_decoder
|
||||
|
||||
lib_ignore =
|
||||
NonBlockingRTTTL
|
||||
NimBLE-Arduino
|
||||
libpax
|
||||
|
||||
@@ -0,0 +1,19 @@
|
||||
[esp32s2_base]
|
||||
extends = esp32_base
|
||||
custom_esp32_kind = esp32s2
|
||||
|
||||
build_src_filter =
|
||||
${esp32_base.build_src_filter} - <libpax/> -<nimble/> -<mesh/raspihttp>
|
||||
|
||||
monitor_speed = 115200
|
||||
|
||||
build_flags =
|
||||
${esp32_base.build_flags}
|
||||
-DHAS_BLUETOOTH=0
|
||||
-DMESHTASTIC_EXCLUDE_PAXCOUNTER
|
||||
-DMESHTASTIC_EXCLUDE_BLUETOOTH
|
||||
|
||||
lib_ignore =
|
||||
${esp32_base.lib_ignore}
|
||||
NimBLE-Arduino
|
||||
libpax
|
||||
@@ -0,0 +1,6 @@
|
||||
[esp32s3_base]
|
||||
extends = esp32_base
|
||||
custom_esp32_kind = esp32s3
|
||||
|
||||
monitor_speed = 115200
|
||||
|
||||
@@ -0,0 +1,32 @@
|
||||
[nrf52_base]
|
||||
; Instead of the standard nordicnrf52 platform, we use our fork which has our added variant files
|
||||
platform = platformio/nordicnrf52@^10.7.0
|
||||
extends = arduino_base
|
||||
platform_packages =
|
||||
; our custom Git version until they merge our PR
|
||||
framework-arduinoadafruitnrf52 @ https://github.com/meshtastic/Adafruit_nRF52_Arduino.git#e13f5820002a4fb2a5e6754b42ace185277e5adf
|
||||
toolchain-gccarmnoneeabi@~1.90301.0
|
||||
|
||||
build_type = debug
|
||||
build_flags =
|
||||
-include arch/nrf52/cpp_overrides/lfs_util.h
|
||||
${arduino_base.build_flags}
|
||||
-DSERIAL_BUFFER_SIZE=1024
|
||||
-Wno-unused-variable
|
||||
-Isrc/platform/nrf52
|
||||
-DLFS_NO_ASSERT ; Disable LFS assertions , see https://github.com/meshtastic/firmware/pull/3818
|
||||
-DMESHTASTIC_EXCLUDE_AUDIO=1
|
||||
-DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
|
||||
-DMAX_NUM_NODES=80
|
||||
|
||||
build_src_filter =
|
||||
${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
|
||||
|
||||
lib_deps=
|
||||
${arduino_base.lib_deps}
|
||||
${radiolib_base.lib_deps}
|
||||
rweather/Crypto@^0.4.0
|
||||
|
||||
lib_ignore =
|
||||
BluetoothOTA
|
||||
lvgl
|
||||
@@ -0,0 +1,7 @@
|
||||
[nrf52832_base]
|
||||
extends = nrf52_base
|
||||
|
||||
build_flags = ${nrf52_base.build_flags}
|
||||
|
||||
lib_deps =
|
||||
${nrf52_base.lib_deps}
|
||||
@@ -1,17 +1,12 @@
|
||||
[nrf52840_base]
|
||||
extends = nrf52_base
|
||||
|
||||
build_flags =
|
||||
${nrf52_base.build_flags}
|
||||
-DSERIAL_BUFFER_SIZE=4096
|
||||
-DLED_BUILTIN=-1
|
||||
build_flags = ${nrf52_base.build_flags}
|
||||
|
||||
lib_deps =
|
||||
${nrf52_base.lib_deps}
|
||||
${environmental_base.lib_deps}
|
||||
${environmental_extra.lib_deps}
|
||||
# renovate: datasource=git-refs depName=Kongduino-Adafruit_nRFCrypto packageName=https://github.com/Kongduino/Adafruit_nRFCrypto gitBranch=master
|
||||
https://github.com/Kongduino/Adafruit_nRFCrypto/archive/8cde7189b5ead9dcd49f72601b43b969c0bbc06e.zip
|
||||
https://github.com/Kongduino/Adafruit_nRFCrypto.git#e31a8825ea3300b163a0a3c1ddd5de34e10e1371
|
||||
|
||||
; Common NRF52 debugging settings follow. See the Meshtastic developer docs for how to connect SWD debugging probes to your board.
|
||||
|
||||
@@ -80,4 +75,4 @@ debug_speed = 4000
|
||||
|
||||
; The following is not needed because it automatically tries do this
|
||||
;debug_server_ready_pattern = -.*GDB server started on port \d+.*
|
||||
;debug_port = localhost:3333
|
||||
;debug_port = localhost:3333
|
||||
@@ -0,0 +1,43 @@
|
||||
; The Portduino based 'native' environment. Currently supported on Linux targets with real LoRa hardware (or simulated).
|
||||
[portduino_base]
|
||||
platform = https://github.com/meshtastic/platform-native.git#562d189828f09fbf4c4093b3c0104bae9d8e9ff9
|
||||
framework = arduino
|
||||
|
||||
build_src_filter =
|
||||
${env.build_src_filter}
|
||||
-<platform/esp32/>
|
||||
-<nimble/>
|
||||
-<platform/nrf52/>
|
||||
-<platform/stm32wl/>
|
||||
-<platform/rp2xx0>
|
||||
-<mesh/wifi/>
|
||||
-<mesh/http/>
|
||||
+<mesh/raspihttp/>
|
||||
-<mesh/eth/>
|
||||
-<modules/esp32>
|
||||
-<modules/Telemetry/EnvironmentTelemetry.cpp>
|
||||
-<modules/Telemetry/AirQualityTelemetry.cpp>
|
||||
-<modules/Telemetry/Sensor>
|
||||
+<../variants/portduino>
|
||||
|
||||
lib_deps =
|
||||
${env.lib_deps}
|
||||
${networking_base.lib_deps}
|
||||
${radiolib_base.lib_deps}
|
||||
rweather/Crypto@^0.4.0
|
||||
lovyan03/LovyanGFX@^1.2.0
|
||||
https://github.com/pine64/libch341-spi-userspace#a9b17e3452f7fb747000d9b4ad4409155b39f6ef
|
||||
|
||||
build_flags =
|
||||
${arduino_base.build_flags}
|
||||
-fPIC
|
||||
-Isrc/platform/portduino
|
||||
-DRADIOLIB_EEPROM_UNSUPPORTED
|
||||
-DPORTDUINO_LINUX_HARDWARE
|
||||
-lpthread
|
||||
-lstdc++fs
|
||||
-lbluetooth
|
||||
-lgpiod
|
||||
-lyaml-cpp
|
||||
-li2c
|
||||
-std=c++17
|
||||
@@ -0,0 +1,26 @@
|
||||
; Common settings for rp2040 Processor based targets
|
||||
[rp2040_base]
|
||||
platform = https://github.com/maxgerhardt/platform-raspberrypi.git#19e30129fb1428b823be585c787dcb4ac0d9014c ; For arduino-pico >=4.2.1
|
||||
extends = arduino_base
|
||||
platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#6024e9a7e82a72e38dd90f42029ba3748835eb2e ; 4.3.0 with fix MDNS
|
||||
|
||||
board_build.core = earlephilhower
|
||||
board_build.filesystem_size = 0.5m
|
||||
build_flags =
|
||||
${arduino_base.build_flags} -Wno-unused-variable -Wcast-align
|
||||
-Isrc/platform/rp2xx0
|
||||
-Isrc/platform/rp2xx0/hardware_rosc/include
|
||||
-Isrc/platform/rp2xx0/pico_sleep/include
|
||||
-D__PLAT_RP2040__
|
||||
# -D _POSIX_THREADS
|
||||
build_src_filter =
|
||||
${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<modules/esp32> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/> -<mesh/wifi/> -<mesh/http/> -<mesh/raspihttp>
|
||||
|
||||
lib_ignore =
|
||||
BluetoothOTA
|
||||
|
||||
lib_deps =
|
||||
${arduino_base.lib_deps}
|
||||
${environmental_base.lib_deps}
|
||||
${radiolib_base.lib_deps}
|
||||
rweather/Crypto
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user