kevin/meshtastic_firmware
1
0
Fork 0
Code Issues Pull Requests Actions 7 Packages Projects Releases Wiki Activity

Remove duplicate GPIO init block in setup() from bad merge in PR #9378

Browse Source 
The T-Deck-Pro V1.1 PR (#9378) had a backwards merge (e7b66281) that pulled
236 commits of master INTO a 1-commit fork branch, then a second merge
(8fd0a7f2) duplicated the entire T_DECK/T_DECK_PRO/T_LORA_PAGER/HACKADAY
peripheral init block in setup(). Also removes a stray
digitalWrite(BLE_LED, LED_STATE_OFF) in the HACKADAY section that was an
artifact of the evil merge at e7b66281.
This commit is contained in:
Ben Meadors
2026-04-22 19:35:13 -05:00
parent d8b11f0b14
commit 6171ad8c14
1 changed files with 0 additions and 63 deletions
Download Patch File Download Diff File Expand all files Collapse all files
src/main.cpp
-63
View File
@@ -347,69 +347,6 @@ void setup()
#endif
#endif
#if defined(T_DECK)
// GPIO10 manages all peripheral power supplies
// Turn on peripheral power immediately after MUC starts.
// If some boards are turned on late, ESP32 will reset due to low voltage.
// ESP32-C3(Keyboard) , MAX98357A(Audio Power Amplifier) ,
// TF Card , Display backlight(AW9364DNR) , AN48841B(Trackball) , ES7210(Decoder)
pinMode(KB_POWERON, OUTPUT);
digitalWrite(KB_POWERON, HIGH);
// T-Deck has all three SPI peripherals (TFT, SD, LoRa) attached to the same SPI bus
// We need to initialize all CS pins in advance otherwise there will be SPI communication issues
// e.g. when detecting the SD card
pinMode(LORA_CS, OUTPUT);
digitalWrite(LORA_CS, HIGH);
pinMode(SDCARD_CS, OUTPUT);
digitalWrite(SDCARD_CS, HIGH);
pinMode(TFT_CS, OUTPUT);
digitalWrite(TFT_CS, HIGH);
delay(100);
#elif defined(T_DECK_PRO)
pinMode(LORA_EN, OUTPUT);
digitalWrite(LORA_EN, HIGH);
pinMode(LORA_CS, OUTPUT);
digitalWrite(LORA_CS, HIGH);
pinMode(SDCARD_CS, OUTPUT);
digitalWrite(SDCARD_CS, HIGH);
pinMode(PIN_EINK_CS, OUTPUT);
digitalWrite(PIN_EINK_CS, HIGH);
#if PIN_EINK_RES >= 0
pinMode(PIN_EINK_RES, OUTPUT);
digitalWrite(PIN_EINK_RES, HIGH);
#endif
pinMode(CST328_PIN_RST, OUTPUT);
digitalWrite(CST328_PIN_RST, HIGH);
#elif defined(T_LORA_PAGER)
pinMode(LORA_CS, OUTPUT);
digitalWrite(LORA_CS, HIGH);
pinMode(SDCARD_CS, OUTPUT);
digitalWrite(SDCARD_CS, HIGH);
pinMode(TFT_CS, OUTPUT);
digitalWrite(TFT_CS, HIGH);
pinMode(KB_INT, INPUT_PULLUP);
// io expander
io.begin(Wire, XL9555_SLAVE_ADDRESS0, SDA, SCL);
io.pinMode(EXPANDS_DRV_EN, OUTPUT);
io.digitalWrite(EXPANDS_DRV_EN, HIGH);
io.pinMode(EXPANDS_AMP_EN, OUTPUT);
io.digitalWrite(EXPANDS_AMP_EN, LOW);
io.pinMode(EXPANDS_LORA_EN, OUTPUT);
io.digitalWrite(EXPANDS_LORA_EN, HIGH);
io.pinMode(EXPANDS_GPS_EN, OUTPUT);
io.digitalWrite(EXPANDS_GPS_EN, HIGH);
io.pinMode(EXPANDS_KB_EN, OUTPUT);
io.digitalWrite(EXPANDS_KB_EN, HIGH);
io.pinMode(EXPANDS_SD_EN, OUTPUT);
io.digitalWrite(EXPANDS_SD_EN, HIGH);
io.pinMode(EXPANDS_GPIO_EN, OUTPUT);
io.digitalWrite(EXPANDS_GPIO_EN, HIGH);
io.pinMode(EXPANDS_SD_PULLEN, INPUT);
#elif defined(HACKADAY_COMMUNICATOR)
pinMode(KB_INT, INPUT);
digitalWrite(BLE_LED, LED_STATE_OFF);
#endif
#if defined(T_DECK)
// GPIO10 manages all peripheral power supplies
// Turn on peripheral power immediately after MUC starts.