fix(t1000e): reclassify P0.04 as sensor power enable GPIO (#9826)

P0.04 is a digital power-enable pin for the NTC/LUX sensors, not an ADC
input. The old code was calling analogRead() on a floating GPIO that
happened to read ~mid-rail, coincidentally producing reasonable
temperature values.

- Rename T1000X_VCC_PIN to T1000X_SENSOR_EN_PIN and drive it HIGH in
initVariant() for both T1000-E and T1000-S variants
- Read BATTERY_PIN (with ADC_MULTIPLIER) instead, clamped to the 3.0V
LDO output (NTC_REF_VCC) for the NTC resistance calculation

variants/nrf52840/tracker-t1000-e/variant.cpp

@@ -38,6 +38,9 @@ void initVariant()
     pinMode(PIN_3V3_ACC_EN, OUTPUT);
     digitalWrite(PIN_3V3_ACC_EN, HIGH);
 
+    pinMode(T1000X_SENSOR_EN_PIN, OUTPUT);
+    digitalWrite(T1000X_SENSOR_EN_PIN, HIGH);
+
     pinMode(BUZZER_EN_PIN, OUTPUT);
     digitalWrite(BUZZER_EN_PIN, HIGH);
 

variants/nrf52840/tracker-t1000-e/variant.h

@@ -126,7 +126,7 @@ extern "C" {
 #define BATTERY_PIN 2 // P0.02/AIN0, BAT_ADC
 #define BATTERY_IMMUTABLE
 #define ADC_MULTIPLIER (2.0F)
-// P0.04/AIN2 is VCC_ADC, P0.05/AIN3 is CHARGER_DET, P1.03 is CHARGE_STA, P1.04 is CHARGE_DONE
+// P0.04 is sensor power enable, P0.05/AIN3 is CHARGER_DET, P1.03 is CHARGE_STA, P1.04 is CHARGE_DONE
 
 #define EXT_CHRG_DETECT (32 + 3) // P1.03
 #define EXT_CHRG_DETECT_VALUE LOW
@@ -148,9 +148,9 @@ extern "C" {
 #define PIN_BUZZER (0 + 25)    // P0.25, pwm output
 
 #define T1000X_SENSOR_EN
-#define T1000X_VCC_PIN (0 + 4)  // P0.4
-#define T1000X_NTC_PIN (0 + 31) // P0.31/AIN7
-#define T1000X_LUX_PIN (0 + 29) // P0.29/AIN5
+#define T1000X_SENSOR_EN_PIN (0 + 4) // P0.4, Power to Sensor (GPIO, not ADC)
+#define T1000X_NTC_PIN (0 + 31)      // P0.31/AIN7
+#define T1000X_LUX_PIN (0 + 29)      // P0.29/AIN5
 
 #define HAS_SCREEN 0
 

variants/nrf52840/wio-t1000-s/variant.cpp

@@ -38,6 +38,9 @@ void initVariant()
     pinMode(PIN_3V3_ACC_EN, OUTPUT);
     digitalWrite(PIN_3V3_ACC_EN, LOW);
 
+    pinMode(T1000X_SENSOR_EN_PIN, OUTPUT);
+    digitalWrite(T1000X_SENSOR_EN_PIN, HIGH);
+
     pinMode(BUZZER_EN_PIN, OUTPUT);
     digitalWrite(BUZZER_EN_PIN, HIGH);
 

variants/nrf52840/wio-t1000-s/variant.h

@@ -143,9 +143,9 @@ extern "C" {
 #define PIN_BUZZER (0 + 25)    // P0.25, pwm output
 
 #define T1000X_SENSOR_EN
-#define T1000X_VCC_PIN (0 + 4)  // P0.4
-#define T1000X_NTC_PIN (0 + 31) // P0.31
-#define T1000X_LUX_PIN (0 + 29) // P0.29
+#define T1000X_SENSOR_EN_PIN (0 + 4) // P0.4, Power to Sensor (GPIO, not ADC)
+#define T1000X_NTC_PIN (0 + 31)      // P0.31
+#define T1000X_LUX_PIN (0 + 29)      // P0.29
 
 #ifdef __cplusplus
 }