* Add authoring guide for native unit tests in README.md
* Enhance documentation for agent tooling and native unit tests in README and related files
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add ESP32 Power Management lessons learned document
Documents our experimentation with ESP-IDF DFS and why it doesn't
work well for Meshtastic (RTOS locks, BLE locks, USB issues).
Proposes simpler alternative: manual setCpuFrequencyMhz() control
with explicit triggers for when to go fast vs slow.
* docs(prompts): fix markdown fence language tags
* docs: remove ESP32 power management notes
Add a meshtasticd config for the Luckfox Pico Max with the Waveshare Pico LoRa SX1262 TCXO HAT.
Tested on hardware with successful SX1262 init, broadcast, and direct messaging.
The CALIBRATE_ALL (0x7F) command inside resetAGC() clears bit 0 of the
undocumented 0x8B5 register. That bit is set once in init() by #9571 and
#9777 to improve SX1262 RX sensitivity, and the AGC-reset path was not
re-applying it. Result: every SX1262 node silently loses the RX
sensitivity patch ~60s after boot and never recovers until reboot.
Empirically confirmed on Heltec Mesh Node T114 (nRF52840 + SX1262):
- Post-calibration read of 0x8B5 = 0x04 (bit 0 cleared)
- After re-apply: 0x05 (bit 0 set)
Reproducible every AGC_RESET_INTERVAL_MS tick.
Fix re-applies the register bit alongside the existing post-calibration
re-applies (setDio2AsRfSwitch, setRxBoostedGainMode).
* Fix heap blowout on TBeams
* Update src/graphics/draw/MessageRenderer.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Set MESSAGE_HISTORY_LIMIT to 10 for original ESP32 to optimize RAM usage
* Optimize message frame allocation to prevent excessive memory usage
* Refine message history limits for resource-constrained builds and cap cached lines to prevent heap overflow
* Update src/graphics/draw/MessageRenderer.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* fix(native): implement BinarySemaphorePosix with proper pthread synchronization
The BinarySemaphorePosix class (used on all Linux/portduino/native builds)
had stub implementations: give() was a no-op and take() just called
delay(msec) and returned false. This broke the cooperative thread scheduler
on native platforms — threads could not wake the main loop, radio RX
interrupts were missed, and telemetry never transmitted over the mesh.
Replace the stubs with a proper binary semaphore using pthread_mutex_t +
pthread_cond_t + bool signaled:
- take(msec): pthread_cond_timedwait with CLOCK_REALTIME timeout, consumes
signal atomically (binary semaphore semantics)
- give(): sets signaled=true, signals condition variable
- giveFromISR(): delegates to give(), sets pxHigherPriorityTaskWoken
Tested on Raspberry Pi 3 Model B (ARM64, Debian Bookworm) with Adafruit
LoRa Radio Bonnet (SX1276). Before fix: no radio TX/RX, no telemetry on
mesh. After fix: bidirectional LoRa, MQTT gateway, telemetry all working.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* ARCH_PORTDUINO
* Refactor BinarySemaphorePosix header for ARCH_PORTDUINO
* Change preprocessor directive from ifndef to ifdef
* Gate new Semaphore code to Portduino and fix STM compilation
* Binary Semaphore Posix better error handling
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
TomandBen Meadors
Clive BlackledgeandBen Meadors
Jennifer SanchezandBen Meadors
Jonathan BennettandBen Meadors
RuledoandBen Meadors
Catalin PatuleaandBen Meadors
Jaime RoldanandBen Meadors
nightjoker7andBen Meadors
lewisxheandBen Meadors
Thomas GöttgensandGitHub
AustinandGitHub