* Make phone queues use a static pointer queue
* Static init
* Compile time constants now
* Instead, lets just use the normal pointerqueue for linux native builds and static for IoT platforms
* Add missing method
* Missing methods
* Update variant.h
Further to https://github.com/meshtastic/firmware/pull/7897 ,
there was another log line that was triggering indiscriminantly on
GPS_INTERVAL_THRESHOLD .
Rather than logging a bad time 4000 times, let's just log one good time
when it is set.
Meshtastic no longer fits on the flash of the Picomputer.
Since this is a handheld, portable device, it's unlikely that people are
connecting to it via the webserver. So, disable the webserver and it fits
again:
```
Checking size .pio/build/picomputer-s3-tft/firmware.elf
Advanced Memory Usage is available via "PlatformIO Home > Project Inspect"
RAM: [=== ] 32.4% (used 106056 bytes from 327680 bytes)
Flash: [==========] 99.1% (used 3313913 bytes from 3342336 bytes)
```
Fixes: https://github.com/meshtastic/firmware/issues/7906
Further to https://github.com/meshtastic/firmware/pull/7897 ,
there was another log line that was triggering indiscriminantly on
GPS_INTERVAL_THRESHOLD .
Rather than logging a bad time 4000 times, let's just log one good time
when it is set.
In 2.7.7 / 2.7.8 we introduced some new checks for time accuracy.
In combination, these result in a spamming of the logs when a bad time is found
When the GPS is active, we're calling the GPS thread every 0.2secs.
So this log could be printed 4,500 times in a no-lock scenario :)
Reserve this experience for developers using GPS_DEBUG.
Fixes https://github.com/meshtastic/firmware/issues/7896
* Fix excluded modules configuration handling
- Add excluded_modules flags in getDeviceMetadata() for MQTT, PAXCOUNTER, STOREFORWARD, RANGETEST, NEIGHBORINFO
- Add conditional compilation guards in AdminModule for RANGETEST, AUDIO, PAXCOUNTER, STOREFORWARD, EXTNOTIF, DETECTIONSENSOR, AMBIENTLIGHTING
- Add skip logic in PhoneAPI for excluded modules during config enumeration
- Add conditional has_* flags in NodeDB only for included modules
Fixes issue where excluded modules still appeared in client applications and sometimes caused PAYLOADVARIANT_NOT_SET errors.
* Fix excluded modules issues and refactor code
- Restore original PAXCOUNTER logic: only exclude on non-ESP32 platforms due to memory constraints
- Fix has_store_forward flag to be conditionally compiled based on MESHTASTIC_EXCLUDE_STOREFORWARD
- Refactor PhoneAPI module config skipping logic to use helper function skipExcludedModuleConfig()
- Reduce code duplication in PhoneAPI by extracting common skip logic
This addresses the three issues identified in the code review:
1. PAXCOUNTER memory impact on non-ESP32 devices
2. Unconditional has_store_forward flag setting
3. Duplicated state management logic across multiple #else blocks
* Fix ambient lighting module exclusion in PhoneAPI and AdminModule
- Add conditional compilation guards for ambient lighting in PhoneAPI.cpp
- Replace old HAS_RGB_LED logic with MESHTASTIC_EXCLUDE_AMBIENTLIGHTING check in AdminModule.cpp
- Ensure ambient lighting module is properly excluded when MESHTASTIC_EXCLUDE_AMBIENTLIGHTING=1
Mike Robbins
Ben MeadorsandGitHub
Tom FifieldandBen Meadors
AustinandGitHub
Jonathan BennettandGitHub
WilsonandGitHub
ManuelandGitHub
Dmitry DubininandGitHub