platformio/espressif32@6.9.0 --> 6.10.0
lewisxhe/XPowersLib@^0.2.6 --> 0.2.7
platformio/framework-arduinoststm32@~Oct 2024 --> 4.20900.0
zinggjm/GxEPD2@^1.4.9 --> 1.6.2
tool-esptoolpy@^1.40500.0 --> 1.40801.0
Used platformio tool to check, kept to minor version updates,
checked release notes for any breaking changes.
As reported by @jstockdale, when writing coloured logs we were
writing the full string, including a null terminator. This caused
issues for programs consuming our logs. The fix as identified is
not to write the null.
Fixes https://github.com/meshtastic/firmware/issues/5945
* [WIP] Attempt upgrade to LovyanGFX 1.1.16
This is the version most used by the TFT branch.
I wonder if this will work with our existing code? :)
* Update Portduino to LovyanGFX 1.20.0
Manuel says it's good to go.
* Update unPhone platformio.ini
---------
Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com>
* add more locking for shared SPI devices (#5595)
* add more locking for shared SPI devices
* call initSPI before the lock is used
* remove old one
* don't double lock
* Add missing unlock
* More missing unlocks
* Add locks to SafeFile, remove from `readcb`, introduce some LockGuards
* fix lock in setupSDCard()
* pull radiolib trunk with SPI-CS fixes
* change ContentHandler to Constructor type locks, where applicable
---------
Co-authored-by: mverch67 <manuel.verch@gmx.de>
Co-authored-by: GUVWAF <thijs@havinga.eu>
Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com>
* mesh-tab: lower I2C touch frequency
---------
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: mverch67 <manuel.verch@gmx.de>
Co-authored-by: GUVWAF <thijs@havinga.eu>
Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com>
MESHTASTIC_EXCLUDE_SOCKETAPI disables the API Server when set.
Co-authored-by: mverch67 <manuel.verch@gmx.de>
Co-authored-by: GUVWAF <thijs@havinga.eu>
* In graphics/Screen.cpp, a copy/paste error to do with hearts
* In mesh/http/ContentHandler.cpp, an unused variable
* in mqtt/MQTT.cpp, remove unneded logic " '!A || (A && B)' is equivalent to '!A || B'"
* update indicator board
* Fixed the issue that indicator device uploads via rp2040 serial port in some cases.
* esp debug logs
* USB mode=1 messed up the debug log
* dummy for config transfer (#5154)
---------
Co-authored-by: mverch67 <manuel.verch@gmx.de>
Co-authored-by: virgil <virgil.wang.cj@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Selection of minor edits from the TFT branch that are too
challenging to cherry-pick cleanly, including:
* introducing the HAS_TFT flag
* fixing pins in unphone
* Adding pinterdevice to portduino settings
As reported by @Mason10198, the WisMesh Pocket was always waking
on accelerometer motion.
This change gates the LIS3DH sensor's call to wakeScreen based on
config.display.wake_on_tap_or_motion .
fixes https://github.com/meshtastic/firmware/issues/5579
As reported by @Fastomat, if a user had enabled "Share Phone
Position" in the app, RangeTest did not use this position and
recorded a 0,0 lat/lon.
This change preferences GPS where avaialble, but otherwise
uses the position stored for the node in NodeDB.
fixes https://github.com/meshtastic/firmware/issues/5620
Presently we base the default long name (Meshtastic XXXX) and short
names (XXXX) on a node's MAC address. This works fine, unless you
have a node with no bluetooth, like Portduino.
Our logic for node numbers is also based on MAC address. However,
it has the added feature that it will create a random node number
if the Mac address is no good. The name is always "Meshtastic 0001".
This change switches node names (long and short) to instead rely
on the node number for defaults. For nodes with mac addresses,
there should be no user-visible change. For nodes without, they'll
now have a name other than "Meshtastic 0001".
Fixes https://github.com/meshtastic/firmware/issues/5370
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Synch minor changes from TFT branch
Includes:
* New nordicnrf52 minor version (10.5.0 --> 10.6.0)
* Optimisations for T_DECK
* preparation for MESH_TAB
* add ext notification module to portduino
---------
Co-authored-by: mverch67 <manuel.verch@gmx.de>
* Web now(?) comes in a /build subdirector in the tar
So let's move everything to where it's expected and cleanup before
trying to unzip.
* Add checks to avoid running unneeded commands
stops this failing in the event the build subdir goes away.
NodeDB becoming full at 100 entries and cycling out old entries is normal behaviour. The user doesn't need to take any action and shouldn't be concerned when this happens.
Remove the warning from the screen and reduce loglevel to info.
https://github.com/meshtastic/firmware/pull/5247 introduced new
protobufs, particularly the excluded_modules feature.
Immediately afterward, cppcheck started sounding klaxons about
an unitialized variable. This patch simply sets excluded_modules
to none as a temporary measure while the feature from protobuf
is integrated into code.
https://github.com/meshtastic/firmware/pull/5160 introduced a change
which made first publication of GPS information take up to 15mins.
For that initial period, displays would show "No GPS Present", even
if one was detected.
This change fixes that bug, triggering publication immediately after
a GPS module is detected.
* Optimise GPS Baud Rate cycle
Previously, our baud rate cycled through one list twice.
There were some rarer baudrates in there, so this code
separates out those into a dedicated list that is only
run through if detection fails for common bauds. We also
only run through each baud rate once.
* Fix first time around bug
Would have always reset GPS baudrate every time.
* Add support for fixing GPS_BAUDRATE
If GPS_BAUDRATE is set in variant.h, the deployer knows something we
don't about the GPS. Used especially when the GPS is soldered to a board
in a commercial product :) If we see that, we don't try other baud rates
at all.
* Don't print blank lines in GPS_DEBUG.
* Try GPS_BAUDRATE first, not only.
* Fix spelling mistakes in comments
* Only use GPS_BAUDRATE if specified in variant.h
* Modify RareSerial Speeds based on FIXED or not.
We currently have 4 different places where we have the logic for
modifying LED state of the various types of Ambient LEDs,
ExternalNotificationModule::SetExternalOff
ExternalNotificationModule::SetExternalOn
AmbientLightingThread::setLighting
AmbientLightingThread::setLightingOff
This patch de-duplicates the methods in ExternalNotification to
a single method, using a boolean to toggle whether we're turning
things on or off.
After the recent change to move logging line breaks to a central
location, GPS_DEBUG is now emitting one character per line,
making the logs unusable.
Patch uses local strings and appends to collate and then print
in the right places.
Fixes https://github.com/meshtastic/firmware/issues/5099
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Recently there have been reports of intermittent difficulties
detecting U-Blox chips. This patch proposes a new approach that should
be more reliable.
Previously we were fighting with NMEA messages to try and send binary
commands. We unusually also tried changing the Baud rate of U-Blox
chips, something we don't do with any other GPS.
It turns out U-Blox has another method to disable NMEA
messages. PUBX,40 is a text-based command, supported on all the
U-Blox versions we care about that can set the rate of NMEA messages
to zero.
This is what we attempt to do with all other GPS and it works quite
well.
So this patch alters the probe code to:
1. Remove UBX binary code to stop NMEA messages
2. Remove code that tries to reset UBX chips to 9600 baud
3. Add UBX proprietary text commands messages to stop the NMEA flood
4. Improve log strings sent to the user.
Tested on Ublox 6, Ublox 9, and Ublox 10 on multiple devices.
Also tested on several devices with
non-Ublox GPS to ensure it does not interfere with their detection
(heltec-wireless-tracker, wio-tracker-wm11110)
@allanmac noted we were not enabling QZSS on the UC6580.
QZSS is an augmentation service that runs on the same frequency
as GPS, so turning it on should not have any impact on usage other
than improving performance for users in the Asia Pacific.
Fixes https://github.com/meshtastic/firmware/issues/5009
There are three different frequencies available for Meshtastic
in the Philippines, each with pros and cons:
433 - 434.7 MHz <10 mW erp
868 - 869.4 MHz <25 mW erp
915 - 918 MHz <250 mW EIRP, no external antennna allowed
Philippines may also use LORA_24 unrestricted at up to 10mW, or up to
250mW if there is no external antennna.
Frequency rules in the Philippines are determined by aggregating the
information in laws, following the circulars referenced in the
[National Radio Frequency Allocation Table (NRFAT)](https://ntc.gov.ph/wp-content/uploads/2022/frequencyallocations/NRFAT_Rev_2020.pdf)
and then circulars that amend the circulars referenced in the NRFAT.
A full description of the regulatory basis can be found in the github issue:
https://github.com/meshtastic/firmware/issues/4948#issuecomment-2394926135
For 433MHz and 868MHz we refer to the Low Power Equipment rules for
"Non-specific Short Range Devices, Telemetry, Telecommand, Alarms,
Data In General and Other Similar Applications.".
For 915MHz and Wireless Data Network Services indoor device rules.
A device approved by the NTC is required for any use of Meshtastic
in the Philippines.
fixes https://github.com/meshtastic/firmware/issues/4948
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Previously our debug message for screens blandly stated
"Module wants a UI Frame"
This patch replaces the word Module with the name of the Module
in need of a frame a frame, enhancing debugging ability.
GetTimeSinceMeshPacket was duplicated in PowerTelemetry and
EnvironmentalTelemetry, albeit one had a cooler name than the other.
As we add HealthTelemetry, to avoid creating a third instance of
this method, let's move it somewhere that makese sense.
Adds a new method GetTimeSinceMeshPacket to MeshService and updates
EnvironmentTelemetry and PowerTelemetry to use it.
In 2020, geeksville had a NRF52840-dk development board with a
busted oscilliator. Let's retire it from service :)
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
The lora-relay boards were important pathfinders for nrf52
support some years back. They are no longer commonly produced and
there are now many nrf52 options on the market. Retire these
boards and associated variant.
There is no EXTINT pin available on the Tdeck, which uses
the Ublox M10 GPS. Therefore our previous hack to use that pin
makes the GPS not work. That workaround was implemented to
fix sleep issues which have now since been fixed with the
state machine.
This patch restores the state prior to the hack, which is
known-working.
Additionaly, it was discovered that M10s hate it when you
try and save to non-extistent eeprom/SPI flash.
This patch creates a new SAVE command for the M10 that fixes
this issue.
Many thanks to @MisterC925 whose report and testing was
essential for this fix.
fixes https://github.com/meshtastic/firmware/issues/4625
Co-authored-by: Ken McGuire <kenm@paonia.com>
Based on #4745, PIN_WIRE1_SDA is the 'second' wire interface.
This pach amends the check to determine whether a device has two
wire interfaces should use PIN_WIRE1_SDA, rather than PIN_WIRE_SDA.
* Minor fixes
It turns out setting a map value with the index notation causes
an lookup that can be avoided with emplace. Apply this to one line in
the StoreForward module.
Fix also Cppcheck-determined highly minor performance increase by
passing gpiochipname as a const reference :)
The amount of cycles used on this laptop while learning about these
callouts from cppcheck is unlikely to ever be more than the cycles
saved by the fixes ;)
* Update PortduinoGlue.cpp
* Simplify Ublox code
Ublox comes in a myriad of versions and settings. Presently our
configuration code does a lot of branching based on versions being
or not being present.
This patch adds version detection earlier in the piece and branches
on the set gnssModel instead to create separate setup methods for Ublox 6,
Ublox 7/8/9, and Ublox10.
Additionally, adds a macro to make the code much shorter and more
readable.
* Make trunk happy
* Make trunk happy
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* PMSA0031 sensors require ~3secs before coming up on I2C
As reported by @MALAONE1 and debugged by @shodan8192 , PMSA0031s
on a RAK4631 take 3 seconds before they can become detectable on I2c.
Add a delay(4000) before I2C scan if the air quality sensor pin
is defined.
Fixes https://github.com/meshtastic/firmware/issues/3690
* Remove 4 second wait and rescan during air quality init for the sensor
* works without but this triggers my OCD
---------
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
As reported by @eureekasigns and @GPSFan, Chatter 2 had begun
to show a blank screen on boot after recent TFT display changes.
Setting TFT_BACKLIGHT_ON LOW resolves the issue.
Fixes https://github.com/meshtastic/firmware/issues/4751
As discovered and tested by @Mictronics, default Serial FIFO size
on the Pico is 32bytes, which is not enough for GPS messages.
This patch increases the Serial GPS FIFO buffer size to 256
for the RP2040 Architecture
fixes https://github.com/meshtastic/firmware/issues/3989
QMC5883L and HMC5883L are 3-axis compasses which are often confused.
As reported by @Africmod, we had the wrong I2C address for the QMC5883L.
This patch fixes the address and adds its HMC5883L so we keep info
about both.
Fixes https://github.com/meshtastic/firmware/issues/4144
This getACK is used to look for ASCII responses, so print ASCII
when GPS_DEBUG is enabled.
This markedly assisted with recent AG3335 debugging. It works great
with other chips too (tested eg ATGM336H). Even UBLOX prints
understandable "GPTXT,01,01,01,PDTI inv format*35." responses.
Credit to bluebrolly. on discord.
if u8i == 135, then u8i++ runs, the loop exits since u8i == 136,
then value for u8i is 136 after the for loop.
then in the next line, ntc_res2[u8i] will read past the end
of the array
At the moment if the result of sleepTime calculations comes out
to zero, we put the GPS into HARDSLEEP (losing all its status) and
then immediately make it ACTIVE again.
This patch avoids that toga.
fixes https://github.com/meshtastic/firmware/issues/4657
AG33352 is a Mediatek/Airoha GPS/GLONASS/Galileo/BeiDou receiver.
Patch adds relevant detection and setup code.
Thanks to Bluebrolly and kongduino for providing the relevant
information and testing.
This patch also fixes support for the A3335, which is a related chip.
The setup and detection code now works as tested on a real life
T-1000E!
Thanks to @gpsfan for the guidance.
This patch takes inspiration from our I2CDetect code where we have
many sensors that can be detected rather simply. It creates a new
macro,
PROBE_SIMPLE(Chip name, Command to run, response, Driver, timeout)
and converts existing simple cases to use this macro.
Thanks to user Goyath on Discord, we discovered that in Japan the
250mW radio level requires licensing, and 20mW is the practical
limit. We also discovered that a duty cycle of 10% is needed on
most frequencies.
CH 24-38 920.5-923.5 20mW no airtime restrictions
CH 39-61 923.5-928.1 20mW 10% airtime
Tom FifieldandGitHub
