Triple Press on buttons toggles GPS enable/disable.
This enhancement plays a triple-beep so that users of devices with buzzers can get audible feedback about whether they have turned the GPS off or on. This is especially valuable for screenless devices such as the T1000E where it may not be immediately obvious the GPS has been disabled.
Determines if the given IP address is a private address, i.e. not routable on the public internet.
These are the ranges: 127.0.0.1, 10.0.0.0-10.255.255.255, 172.16.0.0-172.31.255.255, 192.168.0.0-192.168.255.255.
If so, allow MQTT publication the same as existing localhost support.
* ws85 updates
add temperature
add wantack
add high_priority
set lull to 0 if never set.
add the has_FIELD_NAME lines to ws85
* pbufs sync
* high insteaed of max reliability
* only set want_ack and high reliable if sensor_role set
* protobufs
---------
Co-authored-by: Tom Fifield <tom@tomfifield.net>
remove newline from logging statements in code. The LOG_* functions will now magically add it at the end.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Uplink DMs not to us if MQTT encryption enabled
* Only really need to try uplinking encrypted packet if MQTT encryption is enabled
* Add log about publishing nothing when packet is not decrypted and encryption_enabled is false
* Improve comment
Recently there have been reports of intermittent difficulties
detecting U-Blox chips. This patch proposes a new approach that should
be more reliable.
Previously we were fighting with NMEA messages to try and send binary
commands. We unusually also tried changing the Baud rate of U-Blox
chips, something we don't do with any other GPS.
It turns out U-Blox has another method to disable NMEA
messages. PUBX,40 is a text-based command, supported on all the
U-Blox versions we care about that can set the rate of NMEA messages
to zero.
This is what we attempt to do with all other GPS and it works quite
well.
So this patch alters the probe code to:
1. Remove UBX binary code to stop NMEA messages
2. Remove code that tries to reset UBX chips to 9600 baud
3. Add UBX proprietary text commands messages to stop the NMEA flood
4. Improve log strings sent to the user.
Tested on Ublox 6, Ublox 9, and Ublox 10 on multiple devices.
Also tested on several devices with
non-Ublox GPS to ensure it does not interfere with their detection
(heltec-wireless-tracker, wio-tracker-wm11110)
@allanmac noted we were not enabling QZSS on the UC6580.
QZSS is an augmentation service that runs on the same frequency
as GPS, so turning it on should not have any impact on usage other
than improving performance for users in the Asia Pacific.
Fixes https://github.com/meshtastic/firmware/issues/5009
Jonathan BennettandGitHub
Technologyman00andGitHub
Ben MeadorsandGitHub
Johnathon MohrandGitHub
Jeff EplerandGitHub
Andre KandGitHub
Thomas GöttgensandGitHub
TomandGitHub
Ludovic BOUÉandGitHub
mverch67andThomas Göttgens
Mark Trevor BirssandGitHub
GUVWAFandGitHub
todd-herbertandGitHub