* Update exempt labels for stale bot workflow
Adds triaged and backlog to the list of exempt labels.
* Update meshtastic/web to v2.6.7 (#8381)
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
* Update DFRobot_RTU to v1.0.6 (#8387)
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
* Update mcr.microsoft.com/devcontainers/cpp Docker tag to v2 (#8375)
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
* manual merge stale bot config (#8392)
---------
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
* Add general-purpose packet cache
This commit adds a caching system that will save packet data in a much
more compact form than the regular MeshPacket protobuf. It cannot be
worked with directly to the same degree (although the packet header is
available), but consumes *much* less memory, and as a result can be used
to temporarily store large numbers of packets.
Cached packets can be retrieved either by their (from, id) tuple, or by
their hash.
This cache is a pre-requisite for the upcoming packet replay feature.
* Remove debug initialiser
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Fix ordering
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Add missing size assignment
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Add comments for hash & bucket macros
* Make it clear that this field stores a map of the original data
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* rework I2C sensor init
the goal is to only instantiate sensors that are pressend to save memory.
side effacts:
- easyer sensor integration (less C&P code)
- nodeTelemetrySensorsMap can be removed when all devices are migrated
* add missing ifdef
* refactor a bunch of more sensors
RAM -816
Flash -916
* fix build for t1000
* refactor more sensors
RAM -192
Flash -60
* improve error handling
Flash -112
* fix build
* fix build
* fix IndicatorSensor
* fix tracker-t1000-e build
not sure what magic is used but it works
* Apply suggestion from @Copilot
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Apply suggestion from @Copilot
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Apply suggestion from @Copilot
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update src/modules/Telemetry/Sensor/DFRobotGravitySensor.h
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Fix
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Ham Mode ignores region regulatory limits, so regardless of whether
we set a single TX_GAIN_LORA or an array with a non-linear PA,
we shouldn't limit the power.
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* update to use long names for pager
* remove duplicate
* add menu item
* fix after conflict
* menu name change. use sanitizeString
* fix formatting issue. should pass trunk now.
* remove auto-generated protobufs
* remove log, add tdeck, improvements.
---------
Co-authored-by: l0g-lab <l0g-lab@users.noreply.github.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add Power and Environmental Telemetry Hide/Show
* Allow Power and Telemetry Frames even if module disabled
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
8 months ago, when this was added to the code, the GPS probe code
was still a little flaky.
Particularly after #6114 and #6116 were added, reliability improved
for all devices as we were sending fewer calls on the bus.
Today, the T1000E is the only Meshtastic device that regularly takes
2, 3, or 4 attempts to be detected via the probe code.
Removing these lines, on my T1000E, results in the AG3335 being
detected immediately.
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* Force coverage tests to run in simulation mode
* Revert "Force coverage tests to run in simulation mode"
This reverts commit e4ec719e6f.
* fix: Move `#include "variant.h"` to top of file (fixes#8276)
The original line being further down the file causes any #ifdef/defined() checks for definitions in variant.h to silently skip.
This was noticed when `USE_GC1109_PA` in Heltec v4 and Heltec Wireless Tracker failed to correct program TX_GAIN_LORA, but will also affect any variant.h-dependent configurations in this file, if they would have been defined above where the `#include` previously was.
---------
Co-authored-by: Austin Lane <vidplace7@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Jonathan BennettandGitHub
Ben Meadors
Paweł CzaplewskiandGitHub
Mike WeaverandGitHub
Clive BlackledgeandGitHub
TomandGitHub
Jason PandGitHub
AustinandGitHub
