* Handle existing special case for M5STACK_UNITC6L for DIRECT_MSG_ONLY buzz mode
There already exists a special case for M5STACK_UNITC6L.
Modified it to adhere to new DIRECT_MSG_ONLY buzzer mode
* Add new buzzer mode DIRECT_MSG_ONLY to BuzzerModeMenu
* Disable notifications when buzzer mode is DIRECT_MSG_ONLY
* Change alert_message_buzzer in notification module in DIRECT_MSG_ONLY buzz mode
Better comments
* Fixed spelling in debug log
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
---------
Co-authored-by: nexpspace <4kosjdicx@mozmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* RoutingModule::sendAckNak takes ackWantsAck arg to set want_ack on the ACK itself
* Use reliable delivery for traceroute requests (which will be copied to traceroute responses by setReplyTo)
* Update ReliableRouter::sniffReceived to use ReliableRouter::shouldSuccessAckWithWantAck
* Use isFromUs
* Update MockRoutingModule::sendAckNak to include ackWantsAck argument (currently ignored)
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Introduce non-linear TX_GAIN_LORA
Previously, our TX_GAIN_LORA setting was a single number, intended
to represent the signal gain going through a power amp (plus or minus
antenna, attenuator, and other parts of the RF chain).
It turns out the relationship between the input power (i.e. from an SX1262)
and total output power is often non-linear. While we fudged a 1dBm difference
here and there with existing chips, the Heltec v4 has a 5dBm difference in gain
depending on which end of the input power (and frequency) you are at.
To allow people to run their Heltec v4 at max power when legal, and future
proof our code, this patch introduced an optional array-based TX_GAIN_LORA.
Define NUM_PA_POINTS and set TX_GAIN_LORA to gain values for a given input
power in 1dBm increments, and all will work.
For linear systems, just continue to define TX_GAIN_LORA as a number.
Fixes https://github.com/meshtastic/firmware/issues/8070
* Remove temporary power limit on heltec v4
* Add function RadioLibInterface::checkOutputPower
* Ensure SX126x reaches minimum supported power.
* Keep it simple, instead.
* Add seenRecently = true if wasUpgraded is true but unable to remove from queue (i.e. already sent/processed).
* Consistent comment between FloodingRouter and HopRouter
* Add seenRecently = true if wasUpgraded is true but unable to remove from queue (i.e. already sent/processed).
* Consistent comment between FloodingRouter and HopRouter
Ben MeadorsandGitHub
ford-jones
Jonathan BennettandGitHub
Ford JonesandGitHub
rcarterazandJonathan Bennett
Tom FifieldandGitHub
Clive BlackledgeandBen Meadors
Jason PandGitHub
Dzmitry Plashchynski
WillyJLandGitHub