Jonathan BennettandClaude Fable 5 5baad2e2a8 logging: compile out LOG_TRACE by default, demote chatty DEBUG lines, drop redundant logs (#11391)
* logging: gate LOG_TRACE behind MESHTASTIC_TRACE_LOGGING, drop redundant reclock logs

LOG_TRACE now compiles out by default so trace-level diagnostics cost no
flash; enable with -DMESHTASTIC_TRACE_LOGGING. Portduino keeps it on for
the traceFilename packet-trace feature.

Remove the 66 caller-side I2C reclock/restore log lines in the telemetry
sensors: ReClockI2C::setClock/restoreClock already log both frequencies
internally (now at trace level, since they fire every sensor read).

Also unify near-duplicate literals (colon/case/punctuation variants) so
linker string dedup applies, and drop an information-free bare 'done'.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1

* logging: demote chatty per-packet/per-poll DEBUG lines to trace level

With LOG_TRACE compiled out by default, per-iteration chatter (packet
bookkeeping, sensor poll values, e-ink refresh reasons, GPS pin states,
UI runState traces) now costs no flash on device builds while remaining
one -DMESHTASTIC_TRACE_LOGGING away. 108 lines demoted, 4 information-
free lines removed; failure paths, drop reasons, and one-time init logs
all stay at debug level.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1

* logging: address CodeRabbit review on trace-gate PR

- GPS: pass serial-derived buffers as %s args, never as format strings
  (untrusted bytes could contain % directives)
- 0x%08x for packet id / NodeNum per convention (Router, CannedMessage,
  NeighborInfo); unsigned casts for size_t args; %u for uint32_t delta
- EInk: async full-refresh begin/complete back to DEBUG (rare state
  transitions); per-frame SKIPPED lines stay trace

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1

* logging: gate trace on the flag's value, not its presence

-DMESHTASTIC_TRACE_LOGGING=0 previously *enabled* trace logging because
the gate tested definedness. The flag now defaults per-platform
(portduino 1, else 0) and both backends test the value, so =0 disables,
=1 or a bare -D enables. Also cast tx_after-millis() to uint32_t for %u
(millis() is unsigned long on native).

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1

* logging: clang-format rewrap after specifier widening

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1

* Even fewer bytes!

* logging: keep compile-gated debug lines at debug level; fix native-suite-count

Lines already inside default-off #ifdef blocks (GPS_DEBUG,
DEBUG_LOOP_TIMING) cost no flash and should stay visible at debug level
when their gate is enabled, rather than also requiring
MESHTASTIC_TRACE_LOGGING.

test/native-suite-count lags the two test_event_channel_* suites added
by #11045 (develop's Native Suite Count check has the same mismatch);
bump 46 -> 47.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1

* gps: route GPS_DEBUG diagnostics through a LOG_DEBUG_GPS() macro (#11414)

Replaces 27 log-only #ifdef GPS_DEBUG blocks across GPS.cpp,
PositionModule, MeshService, and GPSStatus.h with a single-line
LOG_DEBUG_GPS() call (src/gps/GPSLog.h, modeled on LOG_MIGRATION:
value-gated, ((void)0) when off). Blocks containing declarations,
control flow, hexDump, or nested conditionals keep an explicit
'#if GPS_DEBUG' guard. RTC.cpp's per-reading raw time dumps and
per-candidate rejection chatter fold under the same gate; quality
transitions and boot-time seeding stay at debug.

Also fixes the '// define GPS_DEBUG' missing-# typo in two variant
headers and updates all seven commented examples to the value form
('#define GPS_DEBUG 1') required by the value-based gate.


Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1

Co-authored-by: Claude <noreply@anthropic.com>

* gps: declare RTC gmtime result as pointer to const (cppcheck)

With the setTime debug dump gated behind GPS_DEBUG, all remaining uses
of t are reads; cppcheck (constVariablePointer) now flags it.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-08-12 00:05:51 +00:00
2026-08-06 14:05:07 +00:00
2021-10-09 17:15:12 +11:00
2026-08-06 14:05:07 +00:00
2024-09-24 15:24:08 -05:00
2026-08-11 14:56:11 +02:00
2026-07-01 19:01:27 -05:00
2026-01-29 10:06:58 -06:00
2024-11-28 06:26:51 -06:00
2024-09-04 15:33:28 -07:00
2026-07-28 11:09:40 +00:00
2026-01-29 10:06:58 -06:00
2026-01-29 10:06:58 -06:00
2026-07-01 19:01:27 -05:00
2025-01-13 12:24:05 +08:00
2026-01-29 10:06:58 -06:00

Meshtastic Logo

Meshtastic Firmware

GitHub release downloads CI CLA assistant Fiscal Contributors Vercel

meshtastic%2Ffirmware | Trendshift

Overview

This repository contains the official device firmware for Meshtastic, an open-source LoRa mesh networking project designed for long-range, low-power communication without relying on internet or cellular infrastructure. The firmware supports various hardware platforms, including ESP32, nRF52, RP2040/RP2350, and Linux-based devices.

Meshtastic enables text messaging, location sharing, and telemetry over a decentralized mesh network, making it ideal for outdoor adventures, emergency preparedness, and remote operations.

Get Started

Join our community and help improve Meshtastic! 🚀

Stats

Alt

S
Description
No description provided
Readme GPL-3.0
72 MiB
0 Stars 1 Watchers 0 Forks
2026-09-01 21:05:50 +08:00
Languages
C++ 72.5%
C 23.7%
Python 2%
Shell 1.2%
Batchfile 0.2%
Other 0.2%