Andrew YongandGitHub
83cac93ca8
* fix(MQTT): First MapReport does not get sent Throttle::isWithinTimespanMs(last_report_to_map, map_publish_interval_msecs) is used to maintain the map reporting interval, but because last_report_to_map has an initial value of 0, the map report routine does not start until the system millis() time has passed map_publish_interval_msecs. Fix this by adding a check that last_report_to_map is not 0. Signed-off-by: Andrew Yong <me@ndoo.sg> * feat(MQTT): Send MapReporting immediately upon location fix Do not update last_report_to_map when Map Report is attempted without a valid location, as this results in waiting up to an hour (or configured Map Report interval). That usually happens because most nodes do not keep GPS warm, so GPS usually locks after the first attempt at Map Report. This change also results in the log WARNing message getting spammed until a location is obtained, so remove the message for now. Signed-off-by: Andrew Yong <me@ndoo.sg> * feat(MQTT): Throttled warning when position is not available for MapReport Signed-off-by: Andrew Yong <me@ndoo.sg> --------- Signed-off-by: Andrew Yong <me@ndoo.sg>
Meshtastic Firmware
Overview
This repository contains the official device firmware for Meshtastic, an open-source LoRa mesh networking project designed for long-range, low-power communication without relying on internet or cellular infrastructure. The firmware supports various hardware platforms, including ESP32, nRF52, RP2040/RP2350, and Linux-based devices.
Meshtastic enables text messaging, location sharing, and telemetry over a decentralized mesh network, making it ideal for outdoor adventures, emergency preparedness, and remote operations.
Get Started
- 🔧 Building Instructions – Learn how to compile the firmware from source.
- ⚡ Flashing Instructions – Install or update the firmware on your device.
Join our community and help improve Meshtastic! 🚀
Stats
