Ben MeadorsandGitHub
f61f65891c
nrf52_promicro_diy_tcxo has been failing the nrf52 warm-region guard on develop: the image ends at 0xEA0C0, 192 bytes past the 12 KB WarmNodeStore record-ring reserved at 0xEA000. This variant compiles four radio driver families (SX126x/LLCC68, SX127x/RF95, LR11x0/LR1121, LR2021) so any module can be soldered on, which makes it the largest nrf52 image we ship. Building it with -D EXCLUDE_EMOJI saves 6,808 bytes and puts the image at 0xE8618, 6.6 KB clear of the warm region. EXCLUDE_EMOJI was not previously usable: graphics::emotes[] becomes empty, but the canned-message emote picker never checked for that. Entering the picker clamped emotePickerIndex to numEmotes - 1 (i.e. -1), and selecting read emotes[-1].label into a String - an out-of-bounds read of whatever precedes the array in flash. Guard both entry points instead: refuse to open the picker when there are no emotes, and bounce back to freetext if the picker state is somehow reached anyway. Under whole-image LTO those guards fold to constants, so the picker draw and input paths dead-strip entirely on builds that set EXCLUDE_EMOJI - which is where the savings come from beyond the bitmap data itself. Received messages containing emoji render as text on this variant, and the emote-list key is a no-op. Verified rak4631 (emoji enabled) is unaffected: 0xE46D8, 22 KB clear.
Meshtastic Firmware
Overview
This repository contains the official device firmware for Meshtastic, an open-source LoRa mesh networking project designed for long-range, low-power communication without relying on internet or cellular infrastructure. The firmware supports various hardware platforms, including ESP32, nRF52, RP2040/RP2350, and Linux-based devices.
Meshtastic enables text messaging, location sharing, and telemetry over a decentralized mesh network, making it ideal for outdoor adventures, emergency preparedness, and remote operations.
Get Started
- 🔧 Building Instructions - Learn how to compile the firmware from source.
- ⚡ Flashing Instructions - Install or update the firmware on your device.
Join our community and help improve Meshtastic! 🚀
Stats
