kevin/smartbooks
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

移植了LCD屏幕，FLASH字库

Browse Source 
字库还有偏移问题未解决

Signed-off-by: 无闻风 <53944749+wuwenfengmi1998@users.noreply.github.com>
This commit is contained in:
无闻风
2021-03-11 22:33:36 +08:00
parent ff4edffc46
commit 04b4a6fd02
133 changed files with 30379 additions and 1949 deletions
Download Patch File Download Diff File Expand all files Collapse all files
103ze/mycode/lcd.c
+591
View File
@@ -0,0 +1,591 @@
/*
* lcd.c
*
* Created on: Mar 11, 2021
* Author: 13370
*/
#include "lcd.h"
_lcd_dev lcddev; //管理LCD重要参数
//**************************************************几种快速接口
//写寄存器函数
//regval:寄存器值
void LCD_WR_REG(uint16_t regval)
{
LCD_REG_ADDRESS=regval;//写入要写的寄存器序号
}
//写LCD数据
//data:要写入的值
void LCD_WR_DATA(uint16_t data)
{
LCD_DATA_ADDRESS=data;
}
//读LCD数据
//返回值:读到的值
uint16_t LCD_RD_DATA(void)
{
return LCD_DATA_ADDRESS;
}
//写寄存器
//LCD_Reg:寄存器地址
//LCD_RegValue:要写入的数据
void LCD_WriteReg(uint16_t LCD_Reg, uint16_t LCD_RegValue)
{
LCD_REG_ADDRESS = LCD_Reg; //写入要写的寄存器序号
LCD_DATA_ADDRESS = LCD_RegValue;//写入数据
}
//读寄存器
//LCD_Reg:寄存器地址
//返回值:读到的数据
uint16_t LCD_ReadReg(uint16_t LCD_Reg)
{
LCD_REG_ADDRESS=LCD_Reg; //写入要读的寄存器序号
//delay_us(5);
return LCD_DATA_ADDRESS; //返回读到的值
}
//**************************************************************LCD底层
_lcd_dev lcddev;
//LCD开启显示
void LCD_DisplayOn(void)
{
if(lcddev.id==0X9341||lcddev.id==0X6804||lcddev.id==0X5310)LCD_WR_REG(0X29); //开启显示
else LCD_WriteReg(R7,0x0173); //开启显示
}
//LCD关闭显示
void LCD_DisplayOff(void)
{
if(lcddev.id==0X9341||lcddev.id==0X6804||lcddev.id==0X5310)LCD_WR_REG(0X28); //关闭显示
else LCD_WriteReg(R7,0x0);//关闭显示
}
//设置LCD的自动扫描方向
//注意:其他函数可能会受到此函数设置的影响(尤其是9341/6804这两个奇葩),
//所以,一般设置为L2R_U2D即可,如果设置为其他扫描方式,可能导致显示不正常.
//dir:0~7,代表8个方向(具体定义见lcd.h)
//9320/9325/9328/4531/4535/1505/b505/8989/5408/9341/5310等IC已经实际测试
void LCD_Scan_Dir(uint8_t dir)
{
uint16_t regval=0;
uint8_t dirreg=0;
uint16_t temp;
if(lcddev.dir==1&&lcddev.id!=0X6804)//横屏时，对6804不改变扫描方向！
{
switch(dir)//方向转换
{
case 0:dir=6;break;
case 1:dir=7;break;
case 2:dir=4;break;
case 3:dir=5;break;
case 4:dir=1;break;
case 5:dir=0;break;
case 6:dir=3;break;
case 7:dir=2;break;
}
}
if(lcddev.id==0x9341||lcddev.id==0X6804||lcddev.id==0X5310)//9341/6804/5310,很特殊
{
switch(dir)
{
case L2R_U2D://从左到右,从上到下
regval|=(0<<7)|(0<<6)|(0<<5);
break;
case L2R_D2U://从左到右,从下到上
regval|=(1<<7)|(0<<6)|(0<<5);
break;
case R2L_U2D://从右到左,从上到下
regval|=(0<<7)|(1<<6)|(0<<5);
break;
case R2L_D2U://从右到左,从下到上
regval|=(1<<7)|(1<<6)|(0<<5);
break;
case U2D_L2R://从上到下,从左到右
regval|=(0<<7)|(0<<6)|(1<<5);
break;
case U2D_R2L://从上到下,从右到左
regval|=(0<<7)|(1<<6)|(1<<5);
break;
case D2U_L2R://从下到上,从左到右
regval|=(1<<7)|(0<<6)|(1<<5);
break;
case D2U_R2L://从下到上,从右到左
regval|=(1<<7)|(1<<6)|(1<<5);
break;
}
dirreg=0X36;
if(lcddev.id!=0X5310)regval|=0X08;//5310不需要BGR
if(lcddev.id==0X6804)regval|=0x02;//6804的BIT6和9341的反了
LCD_WriteReg(dirreg,regval);
if((regval&0X20)||lcddev.dir==1)
{
if(lcddev.width<lcddev.height)//交换X,Y
{
temp=lcddev.width;
lcddev.width=lcddev.height;
lcddev.height=temp;
}
}else
{
if(lcddev.width>lcddev.height)//交换X,Y
{
temp=lcddev.width;
lcddev.width=lcddev.height;
lcddev.height=temp;
}
}
LCD_WR_REG(lcddev.setxcmd);
LCD_WR_DATA(0);LCD_WR_DATA(0);
LCD_WR_DATA((lcddev.width-1)>>8);LCD_WR_DATA((lcddev.width-1)&0XFF);
LCD_WR_REG(lcddev.setycmd);
LCD_WR_DATA(0);LCD_WR_DATA(0);
LCD_WR_DATA((lcddev.height-1)>>8);LCD_WR_DATA((lcddev.height-1)&0XFF);
}else
{
switch(dir)
{
case L2R_U2D://从左到右,从上到下
regval|=(1<<5)|(1<<4)|(0<<3);
break;
case L2R_D2U://从左到右,从下到上
regval|=(0<<5)|(1<<4)|(0<<3);
break;
case R2L_U2D://从右到左,从上到下
regval|=(1<<5)|(0<<4)|(0<<3);
break;
case R2L_D2U://从右到左,从下到上
regval|=(0<<5)|(0<<4)|(0<<3);
break;
case U2D_L2R://从上到下,从左到右
regval|=(1<<5)|(1<<4)|(1<<3);
break;
case U2D_R2L://从上到下,从右到左
regval|=(1<<5)|(0<<4)|(1<<3);
break;
case D2U_L2R://从下到上,从左到右
regval|=(0<<5)|(1<<4)|(1<<3);
break;
case D2U_R2L://从下到上,从右到左
regval|=(0<<5)|(0<<4)|(1<<3);
break;
}
if(lcddev.id==0x8989)//8989 IC
{
dirreg=0X11;
regval|=0X6040; //65K
}else//其他驱动IC
{
dirreg=0X03;
regval|=1<<12;
}
LCD_WriteReg(dirreg,regval);
}
}
//设置LCD显示方向
//dir:0,竖屏；1,横屏
void LCD_Display_Dir(uint8_t dir)
{
if(dir==0) //竖屏
{
lcddev.dir=0; //竖屏
lcddev.width=240;
lcddev.height=320;
if(lcddev.id==0X9341||lcddev.id==0X6804||lcddev.id==0X5310)
{
lcddev.wramcmd=0X2C;
lcddev.setxcmd=0X2A;
lcddev.setycmd=0X2B;
if(lcddev.id==0X6804||lcddev.id==0X5310)
{
lcddev.width=320;
lcddev.height=480;
}
}else if(lcddev.id==0X8989)
{
lcddev.wramcmd=R34;
lcddev.setxcmd=0X4E;
lcddev.setycmd=0X4F;
}else
{
lcddev.wramcmd=R34;
lcddev.setxcmd=R32;
lcddev.setycmd=R33;
}
}else //横屏
{
lcddev.dir=1; //横屏
lcddev.width=320;
lcddev.height=240;
if(lcddev.id==0X9341||lcddev.id==0X5310)
{
lcddev.wramcmd=0X2C;
lcddev.setxcmd=0X2A;
lcddev.setycmd=0X2B;
}else if(lcddev.id==0X6804)
{
lcddev.wramcmd=0X2C;
lcddev.setxcmd=0X2B;
lcddev.setycmd=0X2A;
}else if(lcddev.id==0X8989)
{
lcddev.wramcmd=R34;
lcddev.setxcmd=0X4F;
lcddev.setycmd=0X4E;
}else
{
lcddev.wramcmd=R34;
lcddev.setxcmd=R33;
lcddev.setycmd=R32;
}
if(lcddev.id==0X6804||lcddev.id==0X5310)
{
lcddev.width=480;
lcddev.height=320;
}
}
LCD_Scan_Dir(DFT_SCAN_DIR); //默认扫描方向
}
//初始化lcd
//该初始化函数可以初始化各种液晶!
void LCDx_Init(void)
{
LCD_BL(0);
HAL_Delay(50); // delay 50 ms
LCD_WriteReg(0x0000,0x0001);
HAL_Delay(50); // delay 50 ms
lcddev.id = LCD_ReadReg(0x0000);
LCD_WriteReg(0x00E5,0x78F0);
LCD_WriteReg(0x0001,0x0100);
LCD_WriteReg(0x0002,0x0700);
LCD_WriteReg(0x0003,0x1030);
LCD_WriteReg(0x0004,0x0000);
LCD_WriteReg(0x0008,0x0202);
LCD_WriteReg(0x0009,0x0000);
LCD_WriteReg(0x000A,0x0000);
LCD_WriteReg(0x000C,0x0000);
LCD_WriteReg(0x000D,0x0000);
LCD_WriteReg(0x000F,0x0000);
//power on sequence VGHVGL
LCD_WriteReg(0x0010,0x0000);
LCD_WriteReg(0x0011,0x0007);
LCD_WriteReg(0x0012,0x0000);
LCD_WriteReg(0x0013,0x0000);
LCD_WriteReg(0x0007,0x0000);
//vgh
LCD_WriteReg(0x0010,0x1690);
LCD_WriteReg(0x0011,0x0227);
//delayms(100);
//vregiout
LCD_WriteReg(0x0012,0x009D); //0x001b
//delayms(100);
//vom amplitude
LCD_WriteReg(0x0013,0x1900);
//delayms(100);
//vom H
LCD_WriteReg(0x0029,0x0025);
LCD_WriteReg(0x002B,0x000D);
//gamma
LCD_WriteReg(0x0030,0x0007);
LCD_WriteReg(0x0031,0x0303);
LCD_WriteReg(0x0032,0x0003);// 0006
LCD_WriteReg(0x0035,0x0206);
LCD_WriteReg(0x0036,0x0008);
LCD_WriteReg(0x0037,0x0406);
LCD_WriteReg(0x0038,0x0304);//0200
LCD_WriteReg(0x0039,0x0007);
LCD_WriteReg(0x003C,0x0602);// 0504
LCD_WriteReg(0x003D,0x0008);
//ram
LCD_WriteReg(0x0050,0x0000);
LCD_WriteReg(0x0051,0x00EF);
LCD_WriteReg(0x0052,0x0000);
LCD_WriteReg(0x0053,0x013F);
LCD_WriteReg(0x0060,0xA700);
LCD_WriteReg(0x0061,0x0001);
LCD_WriteReg(0x006A,0x0000);
//
LCD_WriteReg(0x0080,0x0000);
LCD_WriteReg(0x0081,0x0000);
LCD_WriteReg(0x0082,0x0000);
LCD_WriteReg(0x0083,0x0000);
LCD_WriteReg(0x0084,0x0000);
LCD_WriteReg(0x0085,0x0000);
//
LCD_WriteReg(0x0090,0x0010);
LCD_WriteReg(0x0092,0x0600);
LCD_WriteReg(0x0007,0x0133);
LCD_WriteReg(0x00,0x0022);//
LCD_Display_Dir(1); //默认为h屏
}
//***********************************************************打点 读点 什么的
//设置光标位置
//Xpos:横坐标
//Ypos:纵坐标
void LCD_SetCursor(uint16_t Xpos, uint16_t Ypos)
{
if(lcddev.id==0X9341||lcddev.id==0X5310)
{
LCD_WR_REG(lcddev.setxcmd);
LCD_WR_DATA(Xpos>>8);
LCD_WR_DATA(Xpos&0XFF);
LCD_WR_REG(lcddev.setycmd);
LCD_WR_DATA(Ypos>>8);
LCD_WR_DATA(Ypos&0XFF);
}else if(lcddev.id==0X6804)
{
if(lcddev.dir==1)Xpos=lcddev.width-1-Xpos;//横屏时处理
LCD_WR_REG(lcddev.setxcmd);
LCD_WR_DATA(Xpos>>8);
LCD_WR_DATA(Xpos&0XFF);
LCD_WR_REG(lcddev.setycmd);
LCD_WR_DATA(Ypos>>8);
LCD_WR_DATA(Ypos&0XFF);
}else
{
if(lcddev.dir==1)Xpos=lcddev.width-1-Xpos;//横屏其实就是调转x,y坐标
LCD_WriteReg(lcddev.setxcmd, Xpos);
LCD_WriteReg(lcddev.setycmd, Ypos);
}
}
//快速画点
//x,y:坐标
//color:颜色
void LCD_Fast_DrawPoint(uint16_t x,uint16_t y,uint16_t color)
{
if(lcddev.id==0X9341||lcddev.id==0X5310)
{
LCD_WR_REG(lcddev.setxcmd);
LCD_WR_DATA(x>>8);
LCD_WR_DATA(x&0XFF);
LCD_WR_REG(lcddev.setycmd);
LCD_WR_DATA(y>>8);
LCD_WR_DATA(y&0XFF);
}else if(lcddev.id==0X6804)
{
if(lcddev.dir==1)x=lcddev.width-1-x;//横屏时处理
LCD_WR_REG(lcddev.setxcmd);
LCD_WR_DATA(x>>8);
LCD_WR_DATA(x&0XFF);
LCD_WR_REG(lcddev.setycmd);
LCD_WR_DATA(y>>8);
LCD_WR_DATA(y&0XFF);
}else
{
if(lcddev.dir==1)x=lcddev.width-1-x;//横屏其实就是调转x,y坐标
LCD_WriteReg(lcddev.setxcmd,x);
LCD_WriteReg(lcddev.setycmd,y);
}
LCD_REG_ADDRESS=lcddev.wramcmd;
LCD_DATA_ADDRESS=color;
}
//画点
//x,y:坐标
//POINT_COLOR:此点的颜色
void LCD_set_dot(uint16_t x,uint16_t y,uint16_t color)
{
LCD_SetCursor(x,y); //设置光标位置
LCD_REG_ADDRESS=lcddev.wramcmd; //开始写入GRAM
LCD_DATA_ADDRESS=color;
}
//清屏函数
//color:要清屏的填充色
void LCD_Clear(uint16_t color)
{
uint32_t index=0;
uint32_t totalpoint=lcddev.width;
totalpoint*=lcddev.height; //得到总点数
if((lcddev.id==0X6804)&&(lcddev.dir==1))//6804横屏的时候特殊处理
{
lcddev.dir=0;
lcddev.setxcmd=0X2A;
lcddev.setycmd=0X2B;
LCD_SetCursor(0x00,0x0000); //设置光标位置
lcddev.dir=1;
lcddev.setxcmd=0X2B;
lcddev.setycmd=0X2A;
}else LCD_SetCursor(0x00,0x0000); //设置光标位置
LCD_REG_ADDRESS=lcddev.wramcmd; //开始写入GRAM
for(index=0;index<totalpoint;index++)
{
LCD_DATA_ADDRESS=color;
}
}
//在指定区域内填充单个颜色
//(sx,sy),(ex,ey):填充矩形对角坐标,区域大小为:(ex-sx+1)*(ey-sy+1)
//color:要填充的颜色
void LCD_Fill(uint16_t sx,uint16_t sy,uint16_t ex,uint16_t ey,uint16_t color)
{
uint16_t i,j;
uint16_t xlen=0;
uint16_t temp;
if((lcddev.id==0X6804)&&(lcddev.dir==1)) //6804横屏的时候特殊处理
{
temp=sx;
sx=sy;
sy=lcddev.width-ex-1;
ex=ey;
ey=lcddev.width-temp-1;
lcddev.dir=0;
lcddev.setxcmd=0X2A;
lcddev.setycmd=0X2B;
LCD_Fill(sx,sy,ex,ey,color);
lcddev.dir=1;
lcddev.setxcmd=0X2B;
lcddev.setycmd=0X2A;
}else
{
xlen=ex-sx+1;
for(i=sy;i<=ey;i++)
{
LCD_SetCursor(sx,i); //设置光标位置
LCD_REG_ADDRESS=lcddev.wramcmd; //开始写入GRAM
for(j=0;j<xlen;j++)LCD_WR_DATA(color); //设置光标位置
}
}
}
//在指定区域内填充指定颜色块
//(sx,sy),(ex,ey):填充矩形对角坐标,区域大小为:(ex-sx+1)*(ey-sy+1)
//color:要填充的颜色
void LCD_Color_Fill(uint16_t sx,uint16_t sy,uint16_t ex,uint16_t ey,const uint16_t *color)
{
uint16_t height,width;
uint16_t i,j;
width=ex-sx; //得到填充的宽度
height=ey-sy; //高度
for(i=0;i<height;i++)
{
LCD_SetCursor(sx,sy+i); //设置光标位置
LCD_REG_ADDRESS=lcddev.wramcmd; //开始写入GRAM
for(j=0;j<width;j++)
{
LCD_DATA_ADDRESS=color[(i*width)+j];//HAL_Delay(10);//写入数据
}
}
}
//从ILI93xx读出的数据为GBR格式，而我们写入的时候为RGB格式。
//通过该函数转换
//c:GBR格式的颜色值
//返回值：RGB格式的颜色值
uint16_t LCD_BGR2RGB(uint16_t c)
{
uint16_t r,g,b,rgb;
b=(c>>0)&0x1f;
g=(c>>5)&0x3f;
r=(c>>11)&0x1f;
rgb=(b<<11)+(g<<5)+(r<<0);
return(rgb);
}
//读取个某点的颜色值
//x,y:坐标
//返回值:此点的颜色
uint16_t LCD_ReadPoint(uint16_t x,uint16_t y)
{
uint16_t r=0,g=0,b=0;
if(x>=lcddev.width||y>=lcddev.height)return 0; //超过了范围,直接返回
LCD_SetCursor(x,y);
if(lcddev.id==0X9341||lcddev.id==0X6804||lcddev.id==0X5310)LCD_WR_REG(0X2E);//9341/6804/3510 发送读GRAM指令
else LCD_WR_REG(R34); //其他IC发送读GRAM指令
//if(lcddev.id==0X9320)opt_delay(2); //FOR 9320,延时2us
if(LCD_DATA_ADDRESS)r=0; //dummy Read
//opt_delay(2);
r=LCD_DATA_ADDRESS; //实际坐标颜色
if(lcddev.id==0X9341||lcddev.id==0X5310) //9341/NT35310要分2次读出
{
//opt_delay(2);
b=LCD_DATA_ADDRESS;
g=r&0XFF;//对于9341/5310,第一次读取的是RG的值,R在前,G在后,各占8位
g<<=8;
}else if(lcddev.id==0X6804)r=LCD_DATA_ADDRESS; //6804第二次读取的才是真实值
if(lcddev.id==0X9325||lcddev.id==0X4535||lcddev.id==0X4531||lcddev.id==0X8989||lcddev.id==0XB505)return r;//这几种IC直接返回颜色值
else if(lcddev.id==0X9341||lcddev.id==0X5310)return (((r>>11)<<11)|((g>>10)<<5)|(b>>11)); //ILI9341/NT35310需要公式转换一下
else return LCD_BGR2RGB(r); //其他IC
}
//***********************************2D
//画线
//x1,y1:起点坐标
//x2,y2:终点坐标
void LCD_DrawLine(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2,uint16_t color)
{
uint16_t t;
int xerr=0,yerr=0,delta_x,delta_y,distance;
int incx,incy,uRow,uCol;
delta_x=x2-x1; //计算坐标增量
delta_y=y2-y1;
uRow=x1;
uCol=y1;
if(delta_x>0)incx=1; //设置单步方向
else if(delta_x==0)incx=0;//垂直线
else {incx=-1;delta_x=-delta_x;}
if(delta_y>0)incy=1;
else if(delta_y==0)incy=0;//水平线
else{incy=-1;delta_y=-delta_y;}
if( delta_x>delta_y)distance=delta_x; //选取基本增量坐标轴
else distance=delta_y;
for(t=0;t<=distance+1;t++ )//画线输出
{
LCD_set_dot(uRow,uCol,color);//画点
xerr+=delta_x ;
yerr+=delta_y ;
if(xerr>distance)
{
xerr-=distance;
uRow+=incx;
}
if(yerr>distance)
{
yerr-=distance;
uCol+=incy;
}
}
}
//在指定位置画一个指定大小的圆
//(x,y):中心点
//r :半径
void Draw_Circle(uint16_t x0,uint16_t y0,uint16_t r,uint16_t color)
{
int a,b;
int di;
a=0;b=r;
di=3-(r<<1); //判断下个点位置的标志
while(a<=b)
{
LCD_set_dot(x0+a,y0-b,color); //5
LCD_set_dot(x0+b,y0-a,color); //0
LCD_set_dot(x0+b,y0+a,color); //4
LCD_set_dot(x0+a,y0+b,color); //6
LCD_set_dot(x0-a,y0+b,color); //1
LCD_set_dot(x0-b,y0+a,color);
LCD_set_dot(x0-a,y0-b,color); //2
LCD_set_dot(x0-b,y0-a,color); //7
a++;
//使用Bresenham算法画圆
if(di<0)di +=4*a+6;
else
{
di+=10+4*(a-b);
b--;
}
}
}