Merge branch 'develop' into sfpp

Reduce key duplication by enabling hardware RNG (#8803 )
* Reduce key duplication by enabling hardware RNG * Apply suggestion from @Copilot Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Apply suggestion from @Copilot Use micros() for worst case random seed for nrf52 Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Minor cleanup, remove dead code and clarify comment * trunk * Add useRadioEntropy bool, default false. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
2026-04-13 18:52:37 -05:00 · 2026-04-13 12:05:23 -05:00 · 2026-04-13 06:28:41 -05:00 · 2026-04-13 06:26:22 -05:00 · 2026-04-12 22:41:25 -05:00 · 2026-04-12 22:09:25 -04:00
259 changed files with 8953 additions and 1942 deletions
@@ -8,8 +8,6 @@ runs:
      uses: actions/checkout@v6
      with:
        submodules: recursive
-        ref: ${{github.event.pull_request.head.ref}}
-        repository: ${{github.event.pull_request.head.repo.full_name}}

    - name: Install dependencies
      shell: bash
@@ -16,8 +16,7 @@ on:
        type: string

 permissions:
-  contents: write
-  packages: write
+  contents: read

 jobs:
  build-debian-src:
@@ -28,8 +27,6 @@ jobs:
        with:
          submodules: recursive
          path: meshtasticd
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}

      - name: Install deps
        shell: bash
@@ -42,6 +39,7 @@ jobs:
          sudo mk-build-deps --install --remove --tool='apt-get -o Debug::pkgProblemResolver=yes --no-install-recommends --yes' debian/control

      - name: Import GPG key
+        if: github.event_name != 'pull_request' && github.event_name != 'pull_request_target'
        uses: crazy-max/ghaction-import-gpg@v7
        with:
          gpg_private_key: ${{ secrets.PPA_GPG_PRIVATE_KEY }}
@@ -60,7 +58,7 @@ jobs:
        run: debian/ci_pack_sdeb.sh
        env:
          SERIES: ${{ inputs.series }}
-          GPG_KEY_ID: ${{ steps.gpg.outputs.keyid }}
+          GPG_KEY_ID: ${{ steps.gpg.outputs.keyid || '' }}
          PKG_VERSION: ${{ steps.version.outputs.deb }}

      - name: Store binaries as an artifact
@@ -26,8 +26,6 @@ jobs:
      - uses: actions/checkout@v6
        with:
          submodules: recursive
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}

      - name: Build ${{ inputs.platform }}
        id: build
@@ -4,9 +4,14 @@ on:
  workflow_dispatch:
    inputs:
      # trunk-ignore(checkov/CKV_GHA_7)
+      target:
+        type: string
+        required: false
+        description: Choose the target board, e.g. nrf52_promicro_diy_tcxo. If blank, will find available targets.
      arch:
        type: choice
        options:
+          - all
          - esp32
          - esp32s3
          - esp32c3
@@ -15,32 +20,18 @@ on:
          - rp2040
          - rp2350
          - stm32
-      target:
-        type: string
-        required: false
-        description: Choose the target board, e.g. nrf52_promicro_diy_tcxo. If blank, will find available targets.
-      # find-target:
-      #   type: boolean
-      #   default: true
-      #   description: 'Find the available targets'
+        description: Choose an arch to limit the search, or 'all' to search all architectures.
+        default: all

 permissions: read-all

 jobs:
  find-targets:
-    if: ${{ inputs.target == '' }}
    strategy:
      fail-fast: false
      matrix:
        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
+          - all
    runs-on: ubuntu-24.04
    steps:
      - uses: actions/checkout@v6
@@ -51,14 +42,37 @@ jobs:
      - run: pip install -U platformio
      - name: Generate matrix
        id: jsonStep
+        env:
+          BUILDTARGET: ${{ inputs.target }}
+          MATRIXARCH: ${{ inputs.arch }}
        run: |
          TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} --level extra)
-          echo "Name: $GITHUB_REF_NAME" >> $GITHUB_STEP_SUMMARY
-          echo "Base: $GITHUB_BASE_REF" >> $GITHUB_STEP_SUMMARY
-          echo "Arch: ${{matrix.arch}}" >> $GITHUB_STEP_SUMMARY
-          echo "Ref: $GITHUB_REF" >> $GITHUB_STEP_SUMMARY
-          echo "Targets:" >> $GITHUB_STEP_SUMMARY
-          echo $TARGETS | jq -r 'sort_by(.board) |.[] | "- " + .board' >> $GITHUB_STEP_SUMMARY
+          if [ "$BUILDTARGET" = "" ]; then
+            echo "Name: $GITHUB_REF_NAME" >> $GITHUB_STEP_SUMMARY
+            echo "Base: $GITHUB_BASE_REF" >> $GITHUB_STEP_SUMMARY
+            echo "Arch: $MATRIXARCH" >> $GITHUB_STEP_SUMMARY
+            echo "Ref: $GITHUB_REF" >> $GITHUB_STEP_SUMMARY
+            echo "## 🎯 The following target boards are available to build:" >> $GITHUB_STEP_SUMMARY
+            echo "| Platform | Board |" >> $GITHUB_STEP_SUMMARY
+            echo "| -------- | ----- |" >> $GITHUB_STEP_SUMMARY
+            echo $TARGETS | jq -r 'sort_by(.board) | sort_by(.platform) |.[] | "| " + .platform + " | " + .board + " |" ' >> $GITHUB_STEP_SUMMARY
+          else
+            echo "We build this one:" >> $GITHUB_STEP_SUMMARY
+            ARCH=$(echo "$TARGETS" | jq --arg BUILDTARGET "$BUILDTARGET" -r '.[] | select(.board==$BUILDTARGET) | .platform')
+            echo "| Platform | Board |" >> $GITHUB_STEP_SUMMARY
+            echo "| -------- | ----- |" >> $GITHUB_STEP_SUMMARY
+            echo "| $ARCH | "$BUILDTARGET" |" >> $GITHUB_STEP_SUMMARY
+            echo "" >> $GITHUB_STEP_SUMMARY
+            if [[ "$ARCH" == "" ]]; then
+              echo "## ❌ Error: Target "$BUILDTARGET" not found!" >> $GITHUB_STEP_SUMMARY
+            else
+              echo "## ✅ Target "$BUILDTARGET" found, proceeding to build." >> $GITHUB_STEP_SUMMARY
+            fi
+            echo "You may need to refresh this page to make the built firmware appear below." >> $GITHUB_STEP_SUMMARY
+            echo "arch=$ARCH" >> $GITHUB_OUTPUT
+          fi
+    outputs:
+      arch: ${{ steps.jsonStep.outputs.arch }}

  version:
    if: ${{ inputs.target != '' }}
@@ -78,16 +92,16 @@ jobs:

  build:
    if: ${{ inputs.target != '' && inputs.arch != 'native' }}
-    needs: [version]
+    needs: [version, find-targets]
    uses: ./.github/workflows/build_firmware.yml
    with:
      version: ${{ needs.version.outputs.long }}
      pio_env: ${{ inputs.target }}
-      platform: ${{ inputs.arch }}
+      platform: ${{ needs.find-targets.outputs.arch }}

  gather-artifacts:
    permissions:
-      contents: write
+      contents: read
      pull-requests: write
    runs-on: ubuntu-latest
    needs: [version, build]
@@ -5,7 +5,7 @@ on:
  workflow_dispatch:
  push:
    branches:
-      - master
+      - develop # Default branch, same as 'cron' above
    paths:
      - debian/**
      - "*.rpkg"
@@ -16,7 +16,7 @@ on:
      - .github/workflows/hook_copr.yml

 permissions:
-  contents: write
+  contents: read
  packages: write

 jobs:
@@ -37,7 +37,7 @@ on:
        value: ${{ jobs.docker-build.outputs.digest }}

 permissions:
-  contents: write
+  contents: read
  packages: write

 jobs:
@@ -50,14 +50,31 @@ jobs:
        uses: actions/checkout@v6
        with:
          submodules: recursive
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}

      - name: Get release version string
        run: |
          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
        id: version

+      - name: Set up QEMU
+        uses: docker/setup-qemu-action@v4
+        with:
+          cache-image: true
+
+      - name: Docker setup
+        uses: docker/setup-buildx-action@v4
+        with:
+          # Add Google/Amazon DockerHub mirrors to buildkit config
+          # https://docs.docker.com/build/ci/github-actions/configure-builder/#registry-mirror
+          buildkitd-config-inline: |
+            [registry."docker.io"]
+              mirrors = ["mirror.gcr.io", "public.ecr.aws"]
+
+      - name: Sanitize platform string
+        id: sanitize_platform
+        # Replace slashes with underscores
+        run: echo "cleaned_platform=${{ inputs.platform }}" | sed 's/\//_/g' >> $GITHUB_OUTPUT
+
      - name: Docker login
        if: ${{ inputs.push }}
        uses: docker/login-action@v4
@@ -65,17 +82,6 @@ jobs:
          username: meshtastic
          password: ${{ secrets.DOCKER_FIRMWARE_TOKEN }}

-      - name: Set up QEMU
-        uses: docker/setup-qemu-action@v4
-
-      - name: Docker setup
-        uses: docker/setup-buildx-action@v4
-
-      - name: Sanitize platform string
-        id: sanitize_platform
-        # Replace slashes with underscores
-        run: echo "cleaned_platform=${{ inputs.platform }}" | sed 's/\//_/g' >> $GITHUB_OUTPUT
-
      - name: Docker tag
        id: meta
        uses: docker/metadata-action@v6
@@ -97,3 +103,6 @@ jobs:
          platforms: ${{ inputs.platform }}
          build-args: |
            PIO_ENV=${{ inputs.pio_env }}
+          # Cache image layers in GitHub Actions cache to speed up subsequent builds.
+          cache-from: type=gha
+          cache-to: type=gha,mode=max
@@ -12,7 +12,7 @@ on:
        type: string

 permissions:
-  contents: write
+  contents: read
  packages: write

 jobs:
@@ -86,8 +86,6 @@ jobs:
        uses: actions/checkout@v6
        with:
          submodules: recursive
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}

      - name: Get release version string
        run: |
@@ -11,8 +11,7 @@ on:
        type: string

 permissions:
-  contents: write
-  packages: write
+  contents: read

 jobs:
  build-copr-hook:
@@ -22,8 +21,6 @@ jobs:
        uses: actions/checkout@v6
        with:
          submodules: recursive
-          ref: ${{ github.ref }}
-          repository: ${{ github.repository }}

      - name: Trigger COPR build
        uses: vidplace7/copr-build@main
@@ -15,8 +15,7 @@ on:
      - "**.md"
      - version.properties

-  # Note: This is different from "pull_request". Need to specify ref when doing checkouts.
-  pull_request_target:
+  pull_request:
    branches:
      - master
      - develop
@@ -29,6 +28,8 @@ on:

  workflow_dispatch:

+permissions: read-all
+
 jobs:
  setup:
    strategy:
@@ -88,8 +89,6 @@ jobs:
      - uses: actions/checkout@v6
        with:
          submodules: recursive
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
      - name: Check ${{ matrix.check.board }}
        uses: meshtastic/gh-action-firmware@main
        with:
@@ -126,9 +125,16 @@ jobs:

  test-native:
    if: ${{ !contains(github.ref_name, 'event/') && github.repository == 'meshtastic/firmware' }}
+    permissions: # Needed for dorny/test-reporter.
+      contents: read
+      actions: read
+      checks: write
    uses: ./.github/workflows/test_native.yml

  docker:
+    permissions: # Needed for pushing to GHCR.
+      contents: read
+      packages: write
    strategy:
      fail-fast: false
      matrix:
@@ -153,9 +159,6 @@ jobs:
  gather-artifacts:
    # trunk-ignore(checkov/CKV2_GHA_1)
    if: github.repository == 'meshtastic/firmware'
-    permissions:
-      contents: write
-      pull-requests: write
    strategy:
      fail-fast: false
      matrix:
@@ -173,9 +176,6 @@ jobs:
    steps:
      - name: Checkout code
        uses: actions/checkout@v6
-        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}

      - uses: actions/download-artifact@v8
        with:
@@ -231,13 +231,6 @@ jobs:
          path: ./*.elf
          retention-days: 30

-      - uses: scruplelesswizard/comment-artifact@main
-        if: ${{ github.event_name == 'pull_request' }}
-        with:
-          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          description: "Download firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
-          github-token: ${{ secrets.GITHUB_TOKEN }}
-
  shame:
    if: github.repository == 'meshtastic/firmware'
    continue-on-error: true
@@ -245,7 +238,7 @@ jobs:
    needs: [build]
    steps:
      - uses: actions/checkout@v6
-        if: github.event_name == 'pull_request_target'
+        if: github.event_name == 'pull_request'
        with:
          filter: blob:none # means we download all the git history but none of the commit (except ones with checkout like the head)
          fetch-depth: 0
@@ -263,24 +256,26 @@ jobs:
          overwrite: true
          path: manifests-new/*.mt.json
      - name: Find the merge base
-        if: github.event_name == 'pull_request_target'
+        if: github.event_name == 'pull_request'
        run: echo "MERGE_BASE=$(git merge-base "origin/$base" "$head")" >> $GITHUB_ENV
        env:
          base: ${{ github.base_ref }}
          head: ${{ github.sha }}
      # Currently broken (for-loop through EVERY artifact -- rate limiting)
      # - name: Download the old manifests
-      #   if: github.event_name == 'pull_request_target'
+      #   if: github.event_name == 'pull_request'
      #   run: gh run download -R "$repo" --name "manifests-$merge_base" --dir manifest-old/
      #   env:
      #     GH_TOKEN: ${{ github.token }}
      #     merge_base: ${{ env.MERGE_BASE }}
      #     repo: ${{ github.repository }}
      # - name: Do scan and post comment
-      #   if: github.event_name == 'pull_request_target'
+      #   if: github.event_name == 'pull_request'
      #   run: python3 bin/shame.py ${{ github.event.pull_request.number }} manifests-old/ manifests-new/

  release-artifacts:
+    permissions: # Needed for 'gh release upload'.
+      contents: write
    runs-on: ubuntu-latest
    if: ${{ github.event_name == 'workflow_dispatch' && github.repository == 'meshtastic/firmware' }}
    outputs:
@@ -314,7 +309,7 @@ jobs:
          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}

      - name: Create release
-        uses: softprops/action-gh-release@v2
+        uses: softprops/action-gh-release@v3
        id: create_release
        with:
          draft: true
@@ -372,6 +367,8 @@ jobs:
          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}

  release-firmware:
+    permissions: # Needed for 'gh release upload'.
+      contents: write
    strategy:
      fail-fast: false
      matrix:
@@ -1,371 +0,0 @@
-name: Merge Queue
-# Not sure how concurrency works in merge_queue, removing for now.
-# concurrency:
-#   group: merge-queue-${{ github.head_ref || github.run_id }}
-#   cancel-in-progress: true
-on:
-  # Merge group is a special trigger that is used to trigger the workflow when a merge group is created.
-  merge_group:
-
-jobs:
-  setup:
-    strategy:
-      fail-fast: true
-      matrix:
-        arch:
-          - all
-          - check
-    runs-on: ubuntu-24.04
-    steps:
-      - uses: actions/checkout@v6
-      - uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-          cache: pip
-      - run: pip install -U platformio
-      - name: Generate matrix
-        id: jsonStep
-        run: |
-          if [[ "$GITHUB_HEAD_REF" == "" ]]; then
-            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
-          else  
-            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} --level pr)
-          fi
-          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF"
-          echo "${{matrix.arch}}=$TARGETS" >> $GITHUB_OUTPUT
-    outputs:
-      all: ${{ steps.jsonStep.outputs.all }}
-      check: ${{ steps.jsonStep.outputs.check }}
-
-  version:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v6
-      - name: Get release version string
-        run: |
-          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
-        id: version
-        env:
-          BUILD_LOCATION: local
-    outputs:
-      long: ${{ steps.version.outputs.long }}
-      deb: ${{ steps.version.outputs.deb }}
-
-  check:
-    needs: setup
-    strategy:
-      fail-fast: true
-      matrix:
-        check: ${{ fromJson(needs.setup.outputs.check) }}
-
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name != 'workflow_dispatch' }}
-    steps:
-      - uses: actions/checkout@v6
-      - name: Build base
-        id: base
-        uses: ./.github/actions/setup-base
-      - name: Check ${{ matrix.check.board }}
-        run: bin/check-all.sh ${{ matrix.check.board }}
-
-  build:
-    needs: [setup, version]
-    strategy:
-      matrix:
-        build: ${{ fromJson(needs.setup.outputs.all) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.build.board }}
-      platform: ${{ matrix.build.platform }}
-
-  build-debian-src:
-    if: github.repository == 'meshtastic/firmware'
-    uses: ./.github/workflows/build_debian_src.yml
-    with:
-      series: UNRELEASED
-      build_location: local
-    secrets: inherit
-
-  package-pio-deps-native-tft:
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    uses: ./.github/workflows/package_pio_deps.yml
-    with:
-      pio_env: native-tft
-    secrets: inherit
-
-  test-native:
-    if: ${{ !contains(github.ref_name, 'event/') }}
-    uses: ./.github/workflows/test_native.yml
-
-  docker:
-    strategy:
-      fail-fast: false
-      matrix:
-        distro: [debian, alpine]
-        platform: [linux/amd64, linux/arm64, linux/arm/v7]
-        pio_env: [native, native-tft]
-        exclude:
-          - distro: alpine
-            platform: linux/arm/v7
-          - pio_env: native-tft
-            platform: linux/arm64
-          - pio_env: native-tft
-            platform: linux/arm/v7
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: ${{ matrix.distro }}
-      platform: ${{ matrix.platform }}
-      runs-on: ${{ contains(matrix.platform, 'arm') && 'ubuntu-24.04-arm' || 'ubuntu-24.04' }}
-      pio_env: ${{ matrix.pio_env }}
-      push: false
-
-  gather-artifacts:
-    # trunk-ignore(checkov/CKV2_GHA_1)
-    permissions:
-      contents: write
-      pull-requests: write
-    strategy:
-      fail-fast: false
-      matrix:
-        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-    runs-on: ubuntu-latest
-    needs: [version, build]
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v6
-        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - uses: actions/download-artifact@v8
-        with:
-          path: ./
-          pattern: firmware-${{matrix.arch}}-*
-          merge-multiple: true
-
-      - name: Display structure of downloaded files
-        run: ls -R
-
-      - name: Move files up
-        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
-
-      - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v7
-        with:
-          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          overwrite: true
-          path: |
-            ./firmware-*.bin
-            ./firmware-*.uf2
-            ./firmware-*.hex
-            ./firmware-*.zip
-            ./device-*.sh
-            ./device-*.bat
-            ./littlefs-*.bin
-            ./bleota*bin
-            ./Meshtastic_nRF52_factory_erase*.uf2
-          retention-days: 30
-
-      - uses: actions/download-artifact@v8
-        with:
-          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output
-
-      # For diagnostics
-      - name: Show artifacts
-        run: ls -lR
-
-      - name: Device scripts permissions
-        run: |
-          chmod +x ./output/device-install.sh || true
-          chmod +x ./output/device-update.sh || true
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
-
-      - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v7
-        with:
-          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          overwrite: true
-          path: ./*.elf
-          retention-days: 30
-
-      - uses: scruplelesswizard/comment-artifact@main
-        if: ${{ github.event_name == 'pull_request' }}
-        with:
-          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          description: "Download firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
-          github-token: ${{ secrets.GITHUB_TOKEN }}
-
-  release-artifacts:
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    outputs:
-      upload_url: ${{ steps.create_release.outputs.upload_url }}
-    needs:
-      - version
-      - gather-artifacts
-      - build-debian-src
-      - package-pio-deps-native-tft
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v6
-
-      - name: Create release
-        uses: softprops/action-gh-release@v2
-        id: create_release
-        with:
-          draft: true
-          prerelease: true
-          name: Meshtastic Firmware ${{ needs.version.outputs.long }} Alpha
-          tag_name: v${{ needs.version.outputs.long }}
-          body: |
-            Autogenerated by github action, developer should edit as required before publishing...
-
-      - name: Download source deb
-        uses: actions/download-artifact@v8
-        with:
-          pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
-          merge-multiple: true
-          path: ./output/debian-src
-
-      - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v8
-        with:
-          pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output/pio-deps-native-tft
-
-      - name: Zip Linux sources
-        working-directory: output
-        run: |
-          zip -j -9 -r ./meshtasticd-${{ needs.version.outputs.deb }}-src.zip ./debian-src
-          zip -9 -r ./platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip ./pio-deps-native-tft
-
-      # For diagnostics
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Add Linux sources to GtiHub Release
-        # Only run when targeting master branch with workflow_dispatch
-        if: ${{ github.ref_name == 'master' }}
-        run: |
-          gh release upload v${{ needs.version.outputs.long }} ./output/meshtasticd-${{ needs.version.outputs.deb }}-src.zip
-          gh release upload v${{ needs.version.outputs.long }} ./output/platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-  release-firmware:
-    strategy:
-      fail-fast: false
-      matrix:
-        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [release-artifacts, version]
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v6
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - uses: actions/download-artifact@v8
-        with:
-          pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output
-
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Device scripts permissions
-        run: |
-          chmod +x ./output/device-install.sh || true
-          chmod +x ./output/device-update.sh || true
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
-
-      - uses: actions/download-artifact@v8
-        with:
-          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./elfs
-
-      - name: Zip debug elfs
-        run: zip -j -9 -r ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./elfs
-
-      # For diagnostics
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Add bins and debug elfs to GitHub Release
-        # Only run when targeting master branch with workflow_dispatch
-        if: ${{ github.ref_name == 'master' }}
-        run: |
-          gh release upload v${{ needs.version.outputs.long }} ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
-          gh release upload v${{ needs.version.outputs.long }} ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-  publish-firmware:
-    runs-on: ubuntu-24.04
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [release-firmware, version]
-    env:
-      targets: |-
-        esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v6
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - uses: actions/download-artifact@v8
-        with:
-          pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./publish
-
-      - name: Publish firmware to meshtastic.github.io
-        uses: peaceiris/actions-gh-pages@v4
-        env:
-          # On event/* branches, use the event name as the destination prefix
-          DEST_PREFIX: ${{ contains(github.ref_name, 'event/') && format('{0}/', github.ref_name) || '' }}
-        with:
-          deploy_key: ${{ secrets.DIST_PAGES_DEPLOY_KEY }}
-          external_repository: meshtastic/meshtastic.github.io
-          publish_branch: master
-          publish_dir: ./publish
-          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ needs.version.outputs.long }}
-          keep_files: true
-          user_name: github-actions[bot]
-          user_email: github-actions[bot]@users.noreply.github.com
-          commit_message: ${{ needs.version.outputs.long }}
-          enable_jekyll: true
@@ -38,7 +38,7 @@ jobs:

      - name: Apply quality label if needed
        if: steps.quality.outputs.response != '' && steps.quality.outputs.response != 'ok'
-        uses: actions/github-script@v8
+        uses: actions/github-script@v9
        env:
          QUALITY_LABEL: ${{ steps.quality.outputs.response }}
        with:
@@ -80,7 +80,7 @@ jobs:
      # ─────────────────────────────────────────────────────────────────────────
      - name: Determine if completeness check should be skipped
        if: steps.quality.outputs.response == 'ok' || steps.quality.outputs.response == ''
-        uses: actions/github-script@v8
+        uses: actions/github-script@v9
        id: check-skip
        with:
          script: |
@@ -134,7 +134,7 @@ jobs:

      - name: Process analysis result
        if: (steps.quality.outputs.response == 'ok' || steps.quality.outputs.response == '') && steps.check-skip.outputs.should_skip != 'true' && steps.analysis.outputs.response != ''
-        uses: actions/github-script@v8
+        uses: actions/github-script@v9
        id: process
        env:
          AI_RESPONSE: ${{ steps.analysis.outputs.response }}
@@ -174,7 +174,7 @@ jobs:

      - name: Apply triage label
        if: steps.process.outputs.label != '' && steps.process.outputs.label != 'none'
-        uses: actions/github-script@v8
+        uses: actions/github-script@v9
        env:
          LABEL_NAME: ${{ steps.process.outputs.label }}
        with:
@@ -200,7 +200,7 @@ jobs:

      - name: Comment on issue
        if: steps.process.outputs.should_comment == 'true'
-        uses: actions/github-script@v8
+        uses: actions/github-script@v9
        env:
          COMMENT_BODY: ${{ steps.process.outputs.comment_body }}
        with:
@@ -22,7 +22,7 @@ jobs:
      # Step 1: Check if PR already has automation/type labels (skip if so)
      # ─────────────────────────────────────────────────────────────────────────
      - name: Check existing labels
-        uses: actions/github-script@v8
+        uses: actions/github-script@v9
        id: check-labels
        with:
          script: |
@@ -58,7 +58,7 @@ jobs:

      - name: Apply quality label if needed
        if: steps.check-labels.outputs.skip_all != 'true' && steps.quality.outputs.response != '' && steps.quality.outputs.response != 'ok'
-        uses: actions/github-script@v8
+        uses: actions/github-script@v9
        id: quality-label
        env:
          QUALITY_LABEL: ${{ steps.quality.outputs.response }}
@@ -113,7 +113,7 @@ jobs:

      - name: Apply type label
        if: steps.check-labels.outputs.skip_all != 'true' && steps.check-labels.outputs.has_type_label != 'true' && steps.classify.outputs.response != ''
-        uses: actions/github-script@v8
+        uses: actions/github-script@v9
        env:
          TYPE_LABEL: ${{ steps.classify.outputs.response }}
        with:
@@ -18,8 +18,7 @@ on:
        type: string

 permissions:
-  contents: write
-  packages: write
+  contents: read

 jobs:
  build-debian-src:
@@ -16,8 +16,7 @@ on:
        type: string

 permissions:
-  contents: write
-  packages: write
+  contents: read

 jobs:
  pkg-pio-libdeps:
@@ -27,8 +26,6 @@ jobs:
        uses: actions/checkout@v6
        with:
          submodules: recursive
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}

      - name: Setup Python
        uses: actions/setup-python@v6
@@ -5,6 +5,8 @@ on:
    secrets:
      PPA_GPG_PRIVATE_KEY:
        required: true
+      PPA_SFTP_PRIVATE_KEY:
+        required: true
    inputs:
      ppa_repo:
        description: Meshtastic PPA to target
@@ -16,8 +18,7 @@ on:
        type: string

 permissions:
-  contents: write
-  packages: write
+  contents: read

 jobs:
  build-debian-src:
@@ -28,6 +29,7 @@ jobs:
      build_location: ppa

  package-ppa:
+    if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
    runs-on: ubuntu-24.04
    needs: build-debian-src
    steps:
@@ -36,14 +38,12 @@ jobs:
        with:
          submodules: recursive
          path: meshtasticd
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}

      - name: Install deps
        shell: bash
        run: |
          sudo apt-get update -y --fix-missing
-          sudo apt-get install -y dput
+          sudo apt-get install -y dput openssh-client

      - name: Import GPG key
        uses: crazy-max/ghaction-import-gpg@v7
@@ -68,7 +68,42 @@ jobs:
      - name: Display structure of downloaded files
        run: ls -lah

-      - name: Publish with dput
-        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
+      - name: Trust Launchpad's SSH key
        run: |
-          dput ${{ inputs.ppa_repo }} meshtasticd_${{ steps.version.outputs.deb }}~${{ inputs.series }}_source.changes
+          mkdir -p ~/.ssh
+          ssh-keyscan -H ppa.launchpad.net >> ~/.ssh/known_hosts
+
+      - name: Setup dput config
+        env:
+          ppa_login: meshtasticorg
+        run: |
+          sudo tee /etc/meshtastic-dput.cf >/dev/null <<EOF
+          [ppa]
+          fqdn                    = ppa.launchpad.net
+          method                  = ftp
+          incoming                = ~%(ppa)s
+          login                   = anonymous
+
+          [ssh-ppa]
+          fqdn                    = ppa.launchpad.net
+          method                  = sftp
+          incoming                = ~%(ssh-ppa)s
+          login                   = ${ppa_login}
+          EOF
+
+      - name: Import SSH key
+        uses: webfactory/ssh-agent@v0.10.0
+        with:
+          ssh-private-key: ${{ secrets.PPA_SFTP_PRIVATE_KEY }}
+        id: ssh
+
+      - name: Publish with dput (sftp)
+        timeout-minutes: 30 # dput is terrible, sometimes runs 'forever'
+        env:
+          up_ppa_repo: ${{ inputs.ppa_repo }}
+          up_series: ${{ inputs.series }}
+          up_version: ${{ steps.version.outputs.deb }}
+        run: >
+          dput -c /etc/meshtastic-dput.cf
+          ssh-${up_ppa_repo}
+          meshtasticd_${up_version}~${up_series}_source.changes
@@ -13,7 +13,7 @@ jobs:
    runs-on: ubuntu-latest
    steps:
      - name: Check for PR labels
-        uses: actions/github-script@v8
+        uses: actions/github-script@v9
        with:
          script: |
            const labels = context.payload.pull_request.labels.map(label => label.name);
@@ -177,7 +177,7 @@ jobs:

      - name: Comment test results on PR
        if: github.event_name == 'pull_request' && needs.native-tests.result != 'skipped'
-        uses: actions/github-script@v8
+        uses: actions/github-script@v9
        with:
          script: |
            const fs = require('fs');
@@ -16,8 +16,6 @@ jobs:
    steps:
      - uses: actions/checkout@v6
        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
          submodules: recursive

      - name: Setup native build
@@ -72,8 +70,6 @@ jobs:
    steps:
      - uses: actions/checkout@v6
        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
          submodules: recursive

      - name: Setup native build
@@ -128,9 +124,6 @@ jobs:
    if: always()
    steps:
      - uses: actions/checkout@v6
-        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}

      - name: Get release version string
        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
@@ -143,7 +136,7 @@ jobs:
          merge-multiple: true

      - name: Test Report
-        uses: dorny/test-reporter@v2.6.0
+        uses: dorny/test-reporter@v3.0.0
        with:
          name: PlatformIO Tests
          path: testreport.xml
@@ -52,7 +52,7 @@ jobs:
          node-version: 24

      - name: Setup pnpm
-        uses: pnpm/action-setup@v4
+        uses: pnpm/action-setup@v6
        with:
          version: latest

@@ -6,7 +6,7 @@ permissions: read-all
 jobs:
  update-protobufs:
    runs-on: ubuntu-latest
-    permissions:
+    permissions: # Needed for peter-evans/create-pull-request.
      contents: write
      pull-requests: write
    steps:
@@ -8,27 +8,27 @@ plugins:
      uri: https://github.com/trunk-io/plugins
 lint:
  enabled:
-    - checkov@3.2.508
-    - renovate@43.76.3
+    - checkov@3.2.517
+    - renovate@43.110.9
    - prettier@3.8.1
-    - trufflehog@3.93.8
+    - trufflehog@3.94.3
    - yamllint@1.38.0
    - bandit@1.9.4
    - trivy@0.69.3
    - taplo@0.10.0
-    - ruff@0.15.6
+    - ruff@0.15.9
    - isort@8.0.1
    - markdownlint@0.48.0
    - oxipng@10.1.0
    - svgo@4.0.1
-    - actionlint@1.7.11
+    - actionlint@1.7.12
    - flake8@7.3.0
    - hadolint@2.14.0
    - shfmt@3.6.0
    - shellcheck@0.11.0
    - black@26.3.1
    - git-diff-check
-    - gitleaks@8.30.0
+    - gitleaks@8.30.1
    - clang-format@16.0.3
  ignore:
    - linters: [ALL]
@@ -204,6 +204,16 @@ HostMetrics:
 #  UserStringCommand: cat /sys/firmware/devicetree/base/serial-number # Command to execute, to send the results as the userString


+StoreAndForward:
+#  Enabled: true # Enable Store and Forward++, true by default
+#  DBPath: /var/lib/meshtasticd/ # Path to the S&F++ Sqlite DB
+#  Stratum0: false # Specify if this node is a Stratum 0 node, the controller node.
+#  InitialSync: 10 # Number of messages to 
+#  Hops: 3 # Number of hops to use for SF++ messages
+#  AnnounceInterval: 5 # Interval in minutes between announcing tip of chain hash
+#  MaxChainLength: 1000 # Maximum number of messages to store in a chain
+
+
 Config:
 #  DisplayMode: TWOCOLOR # uncomment to force BaseUI
 #  DisplayMode: COLOR # uncomment to force MUI
@@ -1,3 +1,9 @@
+Meta:
+  name: BananaPi-BPI-R4-sx1262
+  support: community
+  compatible:
+    - bananapi_bpi-r4 # OpenWrt target
+
 Lora:
  Module: sx1262  # BananaPi-BPI-R4 SPI via 26p GPIO Header
 ##  CS: 28
@@ -1,4 +1,10 @@
 ##  https://www.mikroe.com/lr-iot-click
+Meta:
+  name: OpenWRT One mikroBUS LR-IOT-CLICK
+  support: community
+  compatible:
+    - openwrt_one # OpenWrt target
+
 Lora:
  Module: lr1110  # OpenWRT ONE mikroBUS with LR-IOT-CLICK
 #  CS: 25
@@ -1,3 +1,9 @@
+Meta:
+  name: OpenWRT One mikroBUS sx1262
+  support: community
+  compatible:
+    - openwrt_one # OpenWrt target
+
 Lora:
  Module: sx1262
  IRQ: 10
@@ -0,0 +1,28 @@
+# meshtasticd configuration files
+
+This directory contains YAML configuration files for meshtasticd. Each file describes a specific hardware configuration, including the LoRa module and pin assignments. These configurations are used by meshtasticd to correctly interface with the hardware.
+
+## Metadata structure
+
+Each configuration file includes a `Meta` section that provides information about the configuration.
+This configuration is consumed by configuration-selection tools.
+
+```yaml
+Meta:
+  name: MeshAdv-Pi E22-900M30S # A unique identifier for this configuration.
+  support: community # community, official, or deprecated; determined by Meshtastic Leads.
+  compatible: # A list of compatible products or platforms.
+    - raspberry-pi
+```
+`name`: A unique identifier for the configuration, typically reflecting the hardware it supports.
+
+`support`: Indicates the level of support for this configuration. It can be one of the following:
+
+- `community`: Supported by the Meshtastic community. Meshtastic Members may not possess, or have not tested this configuration.
+- `official`: Fully supported by Meshtastic. Meshtastic Members have tested and verified this configuration.
+- `deprecated`: No longer recommended for deployment by Meshtastic.
+
+`compatible`: A list of compatible products or platforms that can use this configuration.
+This will vary depending on the intended use case / platform.
+Multiple compatible entries can be included. E.g. Armbian `BOARD` value or OpenWrt `TARGET` value.
+These tags can be consumed by different configuration-selection tools, filtering based upon their platform/etc.
@@ -1,3 +1,9 @@
+Meta:
+  name: Waveshare 1.44inch LCD HAT
+  support: community
+  compatible:
+    - raspberry-pi
+
 ### Waveshare 1.44inch LCD HAT
 Display:
  Panel: ST7735S
@@ -1,3 +1,9 @@
+Meta:
+  name: Waveshare 2.8inch LCD HAT
+  support: community
+  compatible:
+    - raspberry-pi
+
 Display:

 ### Waveshare 2.8inch RPi LCD
@@ -0,0 +1,30 @@
+---
+Lora:
+## Ebyte E80-900M22S
+## This is a bit experimental
+## 
+##
+  Module: lr1121
+  gpiochip: 1 # subtract 32 from the gpio numbers
+  DIO3_TCXO_VOLTAGE: 1.8
+  CS: 16 #pin6 / GPIO48 1C0
+  IRQ: 23  #pin17 / GPIO55 1C7
+  Busy: 22 #pin16 / GPIO54 1C6
+  Reset: 25 #pin13 / GPIO57 1D1
+
+
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
+  spiSpeed: 2000000
+  
+rfswitch_table:
+  pins: [DIO5, DIO6, DIO7]
+  MODE_STBY: [LOW, LOW, LOW]
+  MODE_RX: [LOW, HIGH, LOW]
+  MODE_TX: [HIGH, HIGH, LOW]
+  MODE_TX_HP: [HIGH, LOW, LOW]
+  MODE_TX_HF: [LOW, LOW, LOW]
+  MODE_GNSS: [LOW, LOW, HIGH]
+  MODE_WIFI: [LOW, LOW, LOW]
+
+General:
+  MACAddressSource: eth0
@@ -0,0 +1,46 @@
+---
+Lora:
+## Ebyte E80-900M22S
+## This is a bit experimental
+## 
+##
+  Module: lr1121
+  gpiochip: 1 # subtract 32 from the gpio numbers
+  DIO3_TCXO_VOLTAGE: 1.8
+  CS: 16 #pin6 / GPIO48 1C0
+  IRQ: 23  #pin17 / GPIO55 1C7
+  Busy: 22 #pin16 / GPIO54 1C6
+  Reset: 25 #pin13 / GPIO57 1D1
+
+
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
+  spiSpeed: 2000000
+  
+rfswitch_table:
+  pins:
+    - DIO5
+    - DIO6
+  MODE_STBY:
+    - LOW
+    - LOW
+  MODE_RX:
+    - HIGH
+    - LOW
+  MODE_TX:
+    - HIGH
+    - HIGH
+  MODE_TX_HP:
+    - LOW
+    - HIGH
+  MODE_TX_HF:
+    - LOW
+    - LOW
+  MODE_GNSS:
+    - LOW
+    - LOW
+  MODE_WIFI:
+    - LOW
+    - LOW
+
+General:
+  MACAddressSource: eth0
@@ -0,0 +1,30 @@
+---
+Lora:
+## Ebyte E80-900M22S
+## This is a bit experimental
+## 
+##
+  Module: lr1121
+  gpiochip: 1 # subtract 32 from the gpio numbers
+  DIO3_TCXO_VOLTAGE: 1.8
+  CS: 16 #pin6 / GPIO48 1C0
+  IRQ: 23  #pin17 / GPIO55 1C7
+  Busy: 22 #pin16 / GPIO54 1C6
+  Reset: 25 #pin13 / GPIO57 1D1
+
+
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
+  spiSpeed: 2000000
+  
+rfswitch_table:
+  pins: [DIO5, DIO6, DIO7]
+  MODE_STBY: [LOW, LOW, LOW]
+  MODE_RX: [LOW, LOW, LOW]
+  MODE_TX: [LOW, HIGH, LOW]
+  MODE_TX_HP: [HIGH, LOW, LOW]
+  # MODE_TX_HF: []
+  # MODE_GNSS: []
+  MODE_WIFI: [LOW, LOW, LOW]
+
+General:
+  MACAddressSource: eth0
@@ -1,3 +1,9 @@
+Meta:
+  name: Adafruit RFM9x
+  support: deprecated
+  compatible:
+    - raspberry-pi
+
 Lora:
  Module: RF95  # Adafruit RFM9x
  Reset: 25
@@ -1,5 +1,11 @@
 # MeshAdv-Pi E22-900M30S
 # https://github.com/chrismyers2000/MeshAdv-Pi-Hat
+Meta:
+  name: MeshAdv-Pi E22-900M30S
+  support: community
+  compatible:
+    - raspberry-pi
+
 Lora:
  Module: sx1262
  CS: 21
@@ -1,5 +1,11 @@
 # MeshAdv Mini E22-900M22S
 # https://github.com/chrismyers2000/MeshAdv-Mini
+Meta:
+  name: MeshAdv Mini E22-900M22S
+  support: community
+  compatible:
+    - raspberry-pi
+
 Lora:
  Module: sx1262  # Ebyte E22-900M22S 
  CS: 8
@@ -1,6 +1,12 @@
+Meta:
+  name: RAK6421 + RAK13300 Slot 1
+  support: official
+  compatible:
+    - raspberry-pi
+
 Lora:

-  ### RAK13300in Slot 1
+  ### RAK13300 in Slot 1
  Module: sx1262
  IRQ: 22 #IO6
  Reset: 16 # IO4
@@ -1,5 +1,11 @@
+Meta:
+  name: RAK6421 + RAK13300 Slot 2
+  support: official
+  compatible:
+    - raspberry-pi
+
 Lora:
-  ### RAK13300in Slot 2 pins
+  ### RAK13300 in Slot 2 pins
  IRQ: 18 #IO6
  Reset: 24 # IO4
  Busy: 19 # IO5
@@ -1,6 +1,12 @@
+Meta:
+  name: RAK6421 + RAK13302 Slot 1
+  support: official
+  compatible:
+    - raspberry-pi
+
 Lora:

-  ### RAK13300in Slot 1
+  ### RAK13302 in Slot 1
  Module: sx1262
  IRQ: 22 #IO6
  Reset: 16 # IO4
@@ -1,5 +1,11 @@
+Meta:
+  name: RAK6421 + RAK13302 Slot 2
+  support: official
+  compatible:
+    - raspberry-pi
+
 Lora:
-  ### RAK13300in Slot 2 pins
+  ### RAK13302 in Slot 2 pins
  IRQ: 18 #IO6
  Reset: 24 # IO4
  Busy: 19 # IO5
@@ -0,0 +1,39 @@
+# MeshAdv-Pi E22-900M30S
+# https://github.com/chrismyers2000/MeshAdv-Pi-Hat
+Meta:
+  name: MeshAdv-Pi E22-900M30S
+  support: community
+  compatible:
+    - ebyte-ecb41-pge # Armbian
+
+Lora:
+  Module: sx1262
+  CS: # GPIO0_A1 (physical 40)
+    pin: 1
+    gpiochip: 0
+    line: 1
+  IRQ: # GPIO0_A3 (physical 36)
+    pin: 3
+    gpiochip: 0
+    line: 3
+  Busy: # GPIO0_A0 (physical 38)
+    pin: 0
+    gpiochip: 0
+    line: 0
+  Reset: # GPIO0_B4 (physical 12)
+    pin: 12
+    gpiochip: 0
+    line: 12
+  TXen: # GPIO1_D1 (physical 33)
+    pin: 57
+    gpiochip: 1
+    line: 25
+  RXen: # GPIO1_B3 (physical 32)
+    pin: 43
+    gpiochip: 1
+    line: 11
+  DIO3_TCXO_VOLTAGE: true
+  # Only for E22-900M33S:
+  # Limit the output power to 8 dBm
+  # SX126X_MAX_POWER: 8
+  spidev: spidev0.0
@@ -0,0 +1,33 @@
+# MeshAdv Mini E22-900M22S
+# https://github.com/chrismyers2000/MeshAdv-Mini
+Meta:
+  name: MeshAdv Mini E22-900M22S
+  support: community
+  compatible:
+    - ebyte-ecb41-pge # Armbian
+
+Lora:
+  Module: sx1262 # Ebyte E22-900M22S
+  CS: # GPIO0_B6 (physical 24, SPI1_CSN0)
+    pin: 14
+    gpiochip: 0
+    line: 14
+  IRQ: # GPIO0_A3 (physical 36)
+    pin: 3
+    gpiochip: 0
+    line: 3
+  Busy: # GPIO0_A0 (physical 38)
+    pin: 0
+    gpiochip: 0
+    line: 0
+  Reset: # GPIO1_C3 (physical 18)
+    pin: 51
+    gpiochip: 1
+    line: 19
+  RXen: # GPIO1_B3 (physical 32)
+    pin: 43
+    gpiochip: 1
+    line: 11
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true
+  spidev: spidev0.0
@@ -0,0 +1,38 @@
+Meta:
+  name: RAK6421 + RAK13300 Slot 1
+  support: community # Promote when tested
+  compatible:
+    - ebyte-ecb41-pge # Armbian
+
+Lora:
+  Module: sx1262
+  IRQ: # GPIO0_A5 (IO6, physical 15)
+    pin: 5
+    gpiochip: 0
+    line: 5
+  Reset: # GPIO0_A3 (IO4, physical 36)
+    pin: 3
+    gpiochip: 0
+    line: 3
+  Busy: # GPIO1_C3 (IO5, physical 18)
+    pin: 51
+    gpiochip: 1
+    line: 19
+  # Ant_sw: # GPIO1_C2 (IO3, physical 16)
+  #   pin: 50
+  #   gpiochip: 1
+  #   line: 18
+  Enable_Pins:
+    - pin: 43 # GPIO1_B3 (physical 32)
+      gpiochip: 1
+      line: 11
+    - pin: 57 # GPIO1_D1 (physical 33)
+      gpiochip: 1
+      line: 25
+  DIO3_TCXO_VOLTAGE: true
+  DIO2_AS_RF_SWITCH: true
+  spidev: spidev0.0
+  # CS: # GPIO0_B6 (SPI1_CSN0, physical 24)
+  #   pin: 14
+  #   gpiochip: 0
+  #   line: 14
@@ -0,0 +1,36 @@
+Meta:
+  name: RAK6421 + RAK13300 Slot 2
+  support: community # Promote when tested
+  compatible:
+    - ebyte-ecb41-pge # Armbian
+
+Lora:
+  Module: sx1262
+  IRQ: # GPIO0_B4 (IO6, physical 12)
+    pin: 12
+    gpiochip: 0
+    line: 12
+  Reset: # GPIO1_C3 (IO4, physical 18)
+    pin: 51
+    gpiochip: 1
+    line: 19
+  Busy: # GPIO0_B3 (IO5, physical 35)
+    pin: 11
+    gpiochip: 0
+    line: 11
+  # Ant_sw: # GPIO1_C2 (IO3, physical 16)
+  #   pin: 50
+  #   gpiochip: 1
+  #   line: 18
+  Enable_Pins:
+    - pin: 2 # GPIO0_A2 (physical 37)
+      gpiochip: 0
+      line: 2
+    - pin: 50 # GPIO1_C2 (physical 16)
+      gpiochip: 1
+      line: 18
+  spidev: spidev0.1
+  # CS: # GPIO0_A7 (SPI1_CSN1, physical 26)
+  #   pin: 7
+  #   gpiochip: 0
+  #   line: 7
@@ -0,0 +1,39 @@
+Meta:
+  name: RAK6421 + RAK13302 Slot 1
+  support: community # Promote when tested
+  compatible:
+    - ebyte-ecb41-pge # Armbian
+
+Lora:
+  Module: sx1262
+  IRQ: # GPIO0_A5 (IO6, physical 15)
+    pin: 5
+    gpiochip: 0
+    line: 5
+  Reset: # GPIO0_A3 (IO4, physical 36)
+    pin: 3
+    gpiochip: 0
+    line: 3
+  Busy: # GPIO1_C3 (IO5, physical 18)
+    pin: 51
+    gpiochip: 1
+    line: 19
+  # Ant_sw: # GPIO1_C2 (IO3, physical 16)
+  #   pin: 50
+  #   gpiochip: 1
+  #   line: 18
+  Enable_Pins:
+    - pin: 43 # GPIO1_B3 (physical 32)
+      gpiochip: 1
+      line: 11
+    - pin: 57 # GPIO1_D1 (physical 33)
+      gpiochip: 1
+      line: 25
+  DIO3_TCXO_VOLTAGE: true
+  DIO2_AS_RF_SWITCH: true
+  spidev: spidev0.0
+  # CS: # GPIO0_B6 (SPI1_CSN0, physical 24)
+  #   pin: 14
+  #   gpiochip: 0
+  #   line: 14
+  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]
@@ -0,0 +1,37 @@
+Meta:
+  name: RAK6421 + RAK13302 Slot 2
+  support: community # Promote when tested
+  compatible:
+    - ebyte-ecb41-pge # Armbian
+
+Lora:
+  Module: sx1262
+  IRQ: # GPIO0_B4 (IO6, physical 12)
+    pin: 12
+    gpiochip: 0
+    line: 12
+  Reset: # GPIO1_C3 (IO4, physical 18)
+    pin: 51
+    gpiochip: 1
+    line: 19
+  Busy: # GPIO0_B3 (IO5, physical 35)
+    pin: 11
+    gpiochip: 0
+    line: 11
+  # Ant_sw: # GPIO1_C2 (IO3, physical 16)
+  #   pin: 50
+  #   gpiochip: 1
+  #   line: 18
+  Enable_Pins:
+    - pin: 2 # GPIO0_A2 (physical 37)
+      gpiochip: 0
+      line: 2
+    - pin: 50 # GPIO1_C2 (physical 16)
+      gpiochip: 1
+      line: 18
+  spidev: spidev0.1
+  # CS: # GPIO0_A7 (SPI1_CSN1, physical 26)
+  #   pin: 7
+  #   gpiochip: 0
+  #   line: 7
+  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]
@@ -0,0 +1,30 @@
+Meta:
+  name: Waveshare SX1262
+  support: deprecated
+  compatible:
+    - ebyte-ecb41-pge # Armbian
+
+Lora:
+  Module: sx1262  # Waveshare SX126X XXXM
+  DIO2_AS_RF_SWITCH: true
+  CS: # GPIO0_A1 (physical 40)
+    pin: 1
+    gpiochip: 0
+    line: 1
+  IRQ: # GPIO0_A3 (physical 36)
+    pin: 3
+    gpiochip: 0
+    line: 3
+  Busy: # GPIO0_A0 (physical 38)
+    pin: 0
+    gpiochip: 0
+    line: 0
+  Reset: # GPIO0_B4 (physical 12)
+    pin: 12
+    gpiochip: 0
+    line: 12
+  SX126X_ANT_SW: # GPIO1_B2 (physical 31)
+    pin: 42
+    gpiochip: 1
+    line: 10
+  spidev: spidev0.0
@@ -1,20 +1,22 @@
---
-Lora:
-## Ebyte E80-900M22S
-## This is a bit experimental
-## 
-##
-  Module: lr1121
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO3_TCXO_VOLTAGE: 1.8
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1
-
-
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
-  
-General:
-  MACAddressSource: eth0
+---
+Meta:
+  name: Femtofox Ebyte E80-900M22S with TCXO
+  support: community
+  compatible:
+    - luckfox-pico-mini # Armbian
+
+Lora:
+## Ebyte E80-900M22S
+## This is a bit experimental
+## 
+##
+  Module: lr1121
+  gpiochip: 1 # subtract 32 from the gpio numbers
+  DIO3_TCXO_VOLTAGE: 1.8
+  CS: 16 #pin6 / GPIO48 1C0
+  IRQ: 23  #pin17 / GPIO55 1C7
+  Busy: 22 #pin16 / GPIO54 1C6
+  Reset: 25 #pin13 / GPIO57 1D1
+
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
+  spiSpeed: 2000000
@@ -1,21 +1,24 @@
---
-Lora:
-## Ebyte E22-900M30S, E22-900M22S with or without external RF switching setup
-## HT-RA62 (Has internal switching, but whatever)
-## Seeed WIO SX1262 (already has TXEN-DIO2 link, but needs RXEN)
-## Will work with any module with or without RF switching, and with TCXO
-  Module: sx1262
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1
-  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
-#  TXen: bridge to DIO2 on E22 module
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
-  
-General:
-  MACAddressSource: eth0
+---
+Meta:
+  name: Femtofox SX1262 TCXO
+  support: community
+  compatible:
+    - luckfox-pico-mini # Armbian
+
+Lora:
+## Ebyte E22-900M30S, E22-900M22S with or without external RF switching setup
+## HT-RA62 (Has internal switching, but whatever)
+## Seeed WIO SX1262 (already has TXEN-DIO2 link, but needs RXEN)
+## Will work with any module with or without RF switching, and with TCXO
+  Module: sx1262
+  gpiochip: 1 # subtract 32 from the gpio numbers
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true
+  CS: 16 #pin6 / GPIO48 1C0
+  IRQ: 23  #pin17 / GPIO55 1C7
+  Busy: 22 #pin16 / GPIO54 1C6
+  Reset: 25 #pin13 / GPIO57 1D1
+  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
+#  TXen: bridge to DIO2 on E22 module
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
+  spiSpeed: 2000000
@@ -1,21 +1,24 @@
---
-Lora:
-## Ebyte E22-900MM22S with no external RF switching setup
-## Waveshare SX126X XXXM, AI Thinker RA-01SH
-## Will work with any module with or without RF switching and no TCXO
-
-  Module: sx1262  
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: false
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1 
-  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
-#  TXen: bridge to DIO2 on E22 module
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
-
-General:
-  MACAddressSource: eth0
+---
+Meta:
+  name: Femtofox SX1262 XTAL
+  support: community
+  compatible:
+    - luckfox-pico-mini # Armbian
+
+Lora:
+## Ebyte E22-900MM22S with no external RF switching setup
+## Waveshare SX126X XXXM, AI Thinker RA-01SH
+## Will work with any module with or without RF switching and no TCXO
+
+  Module: sx1262  
+  gpiochip: 1 # subtract 32 from the gpio numbers
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: false
+  CS: 16 #pin6 / GPIO48 1C0
+  IRQ: 23  #pin17 / GPIO55 1C7
+  Busy: 22 #pin16 / GPIO54 1C6
+  Reset: 25 #pin13 / GPIO57 1D1 
+  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
+#  TXen: bridge to DIO2 on E22 module
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
+  spiSpeed: 2000000
@@ -1,6 +1,12 @@
+Meta:
+  name: RAK6421 + RAK13300 Slot 1 (Autoconf default)
+  support: official
+  compatible:
+    - raspberry-pi
+
 Lora:

-  ### RAK13300in Slot 1
+  ### RAK13300 in Slot 1
  Module: sx1262
  IRQ: 22 #IO6
  Reset: 16 # IO4
@@ -1,3 +1,9 @@
+Meta:
+  name: Luckfox Lyra PicoCalc Wio LoRa SX1262
+  support: official
+  compatible:
+    - luckfox-lyra-plus # Armbian
+
 Lora:
  Module: sx1262
  DIO2_AS_RF_SWITCH: true
@@ -2,6 +2,13 @@
 # Enable overlay 'luckfox-lyra-ultra-w-spi0-cs0-spidev' with armbian-config
 # https://github.com/wehooper4/Meshtastic-Hardware/tree/main/Luckfox%20Ultra%20Hat
 # 1 Watt Lyra Ultra hat
+Meta:
+  name: wehooper4 Luckfox Ultra 1W
+  support: community
+  compatible:
+    - luckfox-pico-ultra # Armbian
+    - luckfox-lyra-ultra # Armbian
+
 Lora:
  Module: sx1262
  DIO2_AS_RF_SWITCH: true
@@ -2,6 +2,13 @@
 # Enable overlay 'luckfox-lyra-ultra-w-spi0-cs0-spidev' with armbian-config
 # https://github.com/wehooper4/Meshtastic-Hardware/tree/main/Luckfox%20Ultra%20Hat
 # 2 Watt Lyra Ultra hat
+Meta:
+  name: wehooper4 Luckfox Ultra 2W
+  support: community
+  compatible:
+    - luckfox-pico-ultra # Armbian
+    - luckfox-lyra-ultra # Armbian
+
 Lora:
  Module: sx1262
  DIO2_AS_RF_SWITCH: true
@@ -2,6 +2,12 @@
 # Enable overlay 'luckfox-lyra-plus-spi0-cs0_rmio13-spidev' with armbian-config
 # Waveshare LoRa HAT for Raspberry Pi Pico
 # https://www.waveshare.com/wiki/Pico-LoRa-SX1262
+Meta:
+  name: Waveshare LoRa HAT for Raspberry Pi Pico
+  support: community
+  compatible:
+    - luckfox-lyra-plus # Armbian
+
 Lora:
  Module: sx1262
  DIO2_AS_RF_SWITCH: true
@@ -0,0 +1,39 @@
+# MeshAdv-Pi E22-900M30S
+# https://github.com/chrismyers2000/MeshAdv-Pi-Hat
+Meta:
+  name: MeshAdv-Pi E22-900M30S
+  support: community
+  compatible:
+    - luckfox-lyra-zero-w # Armbian
+
+Lora:
+  Module: sx1262
+  CS: # GPIO0_C2 (physical 40)
+    pin: 18
+    gpiochip: 0
+    line: 18
+  IRQ: # GPIO1_D1 (physical 36)
+    pin: 57
+    gpiochip: 1
+    line: 25
+  Busy: # GPIO0_C1 (physical 38)
+    pin: 17
+    gpiochip: 0
+    line: 17
+  Reset: # GPIO0_B6 (physical 12)
+    pin: 14
+    gpiochip: 0
+    line: 14
+  TXen: # GPIO1_C2 (physical 33)
+    pin: 50
+    gpiochip: 1
+    line: 18
+  RXen: # GPIO1_D2 (physical 32)
+    pin: 58
+    gpiochip: 1
+    line: 26
+  DIO3_TCXO_VOLTAGE: true
+  # Only for E22-900M33S:
+  # Limit the output power to 8 dBm
+  # SX126X_MAX_POWER: 8
+  spidev: spidev0.0
@@ -0,0 +1,33 @@
+# MeshAdv Mini E22-900M22S
+# https://github.com/chrismyers2000/MeshAdv-Mini
+Meta:
+  name: MeshAdv Mini E22-900M22S
+  support: community
+  compatible:
+    - luckfox-lyra-zero-w # Armbian
+
+Lora:
+  Module: sx1262 # Ebyte E22-900M22S
+  CS: # GPIO0_B2_d (phys 24, RPi CE0)
+    pin: 10
+    gpiochip: 0
+    line: 10
+  IRQ: # GPIO1_D1_d (phys 36, RPi GPIO16)
+    pin: 57
+    gpiochip: 1
+    line: 25
+  Busy: # GPIO0_C1_d (phys 38, RPi GPIO20)
+    pin: 17
+    gpiochip: 0
+    line: 17
+  Reset: # GPIO0_B4_d (phys 18, RPi GPIO24)
+    pin: 12
+    gpiochip: 0
+    line: 12
+  RXen: # GPIO1_D2_d (phys 32, RPi GPIO12)
+    pin: 58
+    gpiochip: 1
+    line: 26
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true
+  spidev: spidev0.0
@@ -0,0 +1,38 @@
+Meta:
+  name: RAK6421 + RAK13300 Slot 1
+  support: community # Promote when tested
+  compatible:
+    - luckfox-lyra-zero-w # Armbian
+
+Lora:
+  Module: sx1262
+  IRQ: # GPIO0_A5 (IO6)
+    pin: 5
+    gpiochip: 0
+    line: 5
+  Reset: # GPIO1_D1 (IO4)
+    pin: 57
+    gpiochip: 1
+    line: 25
+  Busy: # GPIO0_B4 (IO5)
+    pin: 12
+    gpiochip: 0
+    line: 12
+  # Ant_sw: # GPIO1_C2 (IO3)
+  #   pin: 50
+  #   gpiochip: 1
+  #   line: 18
+  Enable_Pins:
+    - pin: 58 # GPIO1_D2
+      gpiochip: 1
+      line: 26
+    - pin: 50 # GPIO1_C2
+      gpiochip: 1
+      line: 18
+  DIO3_TCXO_VOLTAGE: true
+  DIO2_AS_RF_SWITCH: true
+  spidev: spidev0.0
+  # CS: # GPIO0_B2
+  #   pin: 10
+  #   gpiochip: 0
+  #   line: 10
@@ -0,0 +1,36 @@
+Meta:
+  name: RAK6421 + RAK13300 Slot 2
+  support: community # Promote when tested
+  compatible:
+    - luckfox-lyra-zero-w # Armbian
+
+Lora:
+  Module: sx1262
+  IRQ: # GPIO0_B6 (IO6)
+    pin: 14
+    gpiochip: 0
+    line: 14
+  Reset: # GPIO0_B4 (IO4)
+    pin: 12
+    gpiochip: 0
+    line: 12
+  Busy: # GPIO1_C0 (IO5)
+    pin: 48
+    gpiochip: 1
+    line: 16
+  # Ant_sw: # GPIO0_B5 (IO3)
+  #   pin: 13
+  #   gpiochip: 0
+  #   line: 13
+  Enable_Pins:
+    - pin: 51 # GPIO1_C3
+      gpiochip: 1
+      line: 19
+    - pin: 13 # GPIO0_B5
+      gpiochip: 0
+      line: 13
+  spidev: spidev0.1
+  # CS: # GPIO0_B1
+  #   pin: 9
+  #   gpiochip: 0
+  #   line: 9
@@ -0,0 +1,39 @@
+Meta:
+  name: RAK6421 + RAK13300 Slot 1
+  support: community # Promote when tested
+  compatible:
+    - luckfox-lyra-zero-w # Armbian
+
+Lora:
+  Module: sx1262
+  IRQ: # GPIO0_A5 (IO6)
+    pin: 5
+    gpiochip: 0
+    line: 5
+  Reset: # GPIO1_D1 (IO4)
+    pin: 57
+    gpiochip: 1
+    line: 25
+  Busy: # GPIO0_B4 (IO5)
+    pin: 12
+    gpiochip: 0
+    line: 12
+  # Ant_sw: # GPIO1_C2 (IO3)
+  #   pin: 50
+  #   gpiochip: 1
+  #   line: 18
+  Enable_Pins:
+    - pin: 58 # GPIO1_D2
+      gpiochip: 1
+      line: 26
+    - pin: 50 # GPIO1_C2
+      gpiochip: 1
+      line: 18
+  DIO3_TCXO_VOLTAGE: true
+  DIO2_AS_RF_SWITCH: true
+  spidev: spidev0.0
+  # CS: # GPIO0_B2
+  #   pin: 10
+  #   gpiochip: 0
+  #   line: 10
+  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]
@@ -0,0 +1,37 @@
+Meta:
+  name: RAK6421 + RAK13300 Slot 2
+  support: community # Promote when tested
+  compatible:
+    - luckfox-lyra-zero-w # Armbian
+
+Lora:
+  Module: sx1262
+  IRQ: # GPIO0_B6 (IO6)
+    pin: 14
+    gpiochip: 0
+    line: 14
+  Reset: # GPIO0_B4 (IO4)
+    pin: 12
+    gpiochip: 0
+    line: 12
+  Busy: # GPIO1_C0 (IO5)
+    pin: 48
+    gpiochip: 1
+    line: 16
+  # Ant_sw: # GPIO0_B5 (IO3)
+  #   pin: 13
+  #   gpiochip: 0
+  #   line: 13
+  Enable_Pins:
+    - pin: 51 # GPIO1_C3
+      gpiochip: 1
+      line: 19
+    - pin: 13 # GPIO0_B5
+      gpiochip: 0
+      line: 13
+  spidev: spidev0.1
+  # CS: # GPIO0_B1
+  #   pin: 9
+  #   gpiochip: 0
+  #   line: 9
+  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]
@@ -0,0 +1,30 @@
+Meta:
+  name: Waveshare SX1262
+  support: deprecated
+  compatible:
+    - luckfox-lyra-zero-w # Armbian
+
+Lora:
+  Module: sx1262  # Waveshare SX126X XXXM
+  DIO2_AS_RF_SWITCH: true
+  CS: # GPIO0_C2 (physical 40)
+    pin: 18
+    gpiochip: 0
+    line: 18
+  IRQ: # GPIO1_D1 (physical 36)
+    pin: 57
+    gpiochip: 1
+    line: 25
+  Busy: # GPIO0_C1 (physical 38)
+    pin: 17
+    gpiochip: 0
+    line: 17
+  Reset: # GPIO0_B6 (physical 12)
+    pin: 14
+    gpiochip: 0
+    line: 14
+  SX126X_ANT_SW: # GPIO1_B3 (physical 31)
+    pin: 43
+    gpiochip: 1
+    line: 11
+  spidev: spidev0.0
@@ -1,3 +1,9 @@
+Meta:
+  name: Lora Meshstick SX1262
+  support: official
+  compatible:
+    - usb
+
 Lora:
  Module: sx1262
  CS: 0
@@ -0,0 +1,41 @@
+# !! WARNING: Hats on the OK3506 board are installed "backwards" (facing outwards)
+
+# MeshAdv-Pi E22-900M30S
+# https://github.com/chrismyers2000/MeshAdv-Pi-Hat
+Meta:
+  name: MeshAdv-Pi E22-900M30S
+  support: community
+  compatible:
+    - forlinx-ok3506-s12 # Armbian
+
+Lora:
+  Module: sx1262
+  CS: # GPIO0_B0 (physical 40)
+    pin: 8
+    gpiochip: 0
+    line: 8
+  IRQ: # GPIO3_B0 (physical 36)
+    pin: 104
+    gpiochip: 3
+    line: 8
+  Busy: # GPIO0_B1 (physical 38)
+    pin: 9
+    gpiochip: 0
+    line: 9
+  Reset: # GPIO0_B6 (physical 12)
+    pin: 14
+    gpiochip: 0
+    line: 14
+  TXen: # GPIO0_A3 (physical 33)
+    pin: 3
+    gpiochip: 0
+    line: 3
+  RXen: # GPIO0_A2 (physical 32)
+    pin: 2
+    gpiochip: 0
+    line: 2
+  DIO3_TCXO_VOLTAGE: true
+  # Only for E22-900M33S:
+  # Limit the output power to 8 dBm
+  # SX126X_MAX_POWER: 8
+  spidev: spidev0.0
@@ -0,0 +1,35 @@
+# !! WARNING: Hats on the OK3506 board are installed "backwards" (facing outwards)
+
+# MeshAdv Mini E22-900M22S
+# https://github.com/chrismyers2000/MeshAdv-Mini
+Meta:
+  name: MeshAdv Mini E22-900M22S
+  support: community
+  compatible:
+    - forlinx-ok3506-s12 # Armbian
+
+Lora:
+  Module: sx1262 # Ebyte E22-900M22S
+  CS: # GPIO0_C3 (physical 24, SPI0_CSN0)
+    pin: 19
+    gpiochip: 0
+    line: 19
+  IRQ: # GPIO3_B0 (physical 36)
+    pin: 104
+    gpiochip: 3
+    line: 8
+  Busy: # GPIO0_B1 (physical 38)
+    pin: 9
+    gpiochip: 0
+    line: 9
+  Reset: # GPIO3_A6 (physical 18)
+    pin: 102
+    gpiochip: 3
+    line: 6
+  RXen: # GPIO0_A2 (physical 32)
+    pin: 2
+    gpiochip: 0
+    line: 2
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true
+  spidev: spidev0.0
@@ -0,0 +1,40 @@
+# !! WARNING: Hats on the OK3506 board are installed "backwards" (facing outwards)
+
+Meta:
+  name: RAK6421 + RAK13300 Slot 1
+  support: community # Promote when tested
+  compatible:
+    - forlinx-ok3506-s12 # Armbian
+
+Lora:
+  Module: sx1262
+  IRQ: # GPIO3_B5 (IO6, physical 15)
+    pin: 109
+    gpiochip: 3
+    line: 13
+  Reset: # GPIO3_B0 (IO4, physical 36)
+    pin: 104
+    gpiochip: 3
+    line: 8
+  Busy: # GPIO3_A6 (IO5, physical 18)
+    pin: 102
+    gpiochip: 3
+    line: 6
+  # Ant_sw: # GPIO0_A3 (IO3, physical 33)
+  #   pin: 3
+  #   gpiochip: 0
+  #   line: 3
+  Enable_Pins:
+    - pin: 2 # GPIO0_A2 (physical 32)
+      gpiochip: 0
+      line: 2
+    - pin: 3 # GPIO0_A3 (physical 33)
+      gpiochip: 0
+      line: 3
+  DIO3_TCXO_VOLTAGE: true
+  DIO2_AS_RF_SWITCH: true
+  spidev: spidev0.0
+  # CS: # GPIO0_C3 (SPI0_CSN0, physical 24)
+  #   pin: 19
+  #   gpiochip: 0
+  #   line: 19
@@ -0,0 +1,38 @@
+# !! WARNING: Hats on the OK3506 board are installed "backwards" (facing outwards)
+
+Meta:
+  name: RAK6421 + RAK13300 Slot 2
+  support: community # Promote when tested
+  compatible:
+    - forlinx-ok3506-s12 # Armbian
+
+Lora:
+  Module: sx1262
+  IRQ: # GPIO0_B6 (IO6, physical 12)
+    pin: 14
+    gpiochip: 0
+    line: 14
+  Reset: # GPIO3_A6 (IO4, physical 18)
+    pin: 102
+    gpiochip: 3
+    line: 6
+  Busy: # GPIO0_B2 (IO5, physical 35)
+    pin: 10
+    gpiochip: 0
+    line: 10
+  # Ant_sw: # GPIO3_A7 (IO3, physical 16)
+  #   pin: 103
+  #   gpiochip: 3
+  #   line: 7
+  Enable_Pins:
+    - pin: 106 # GPIO3_B2 (physical 37)
+      gpiochip: 3
+      line: 10
+    - pin: 103 # GPIO3_A7 (physical 16)
+      gpiochip: 3
+      line: 7
+  spidev: spidev0.1
+  # CS: # GPIO0_B7 (SPI0_CSN1, physical 26)
+  #   pin: 15
+  #   gpiochip: 0
+  #   line: 15
@@ -0,0 +1,41 @@
+# !! WARNING: Hats on the OK3506 board are installed "backwards" (facing outwards)
+
+Meta:
+  name: RAK6421 + RAK13302 Slot 1
+  support: community # Promote when tested
+  compatible:
+    - forlinx-ok3506-s12 # Armbian
+
+Lora:
+  Module: sx1262
+  IRQ: # GPIO3_B5 (IO6, physical 15)
+    pin: 109
+    gpiochip: 3
+    line: 13
+  Reset: # GPIO3_B0 (IO4, physical 36)
+    pin: 104
+    gpiochip: 3
+    line: 8
+  Busy: # GPIO3_A6 (IO5, physical 18)
+    pin: 102
+    gpiochip: 3
+    line: 6
+  # Ant_sw: # GPIO0_A3 (IO3, physical 33)
+  #   pin: 3
+  #   gpiochip: 0
+  #   line: 3
+  Enable_Pins:
+    - pin: 2 # GPIO0_A2 (physical 32)
+      gpiochip: 0
+      line: 2
+    - pin: 3 # GPIO0_A3 (physical 33)
+      gpiochip: 0
+      line: 3
+  DIO3_TCXO_VOLTAGE: true
+  DIO2_AS_RF_SWITCH: true
+  spidev: spidev0.0
+  # CS: # GPIO0_C3 (SPI0_CSN0, physical 24)
+  #   pin: 19
+  #   gpiochip: 0
+  #   line: 19
+  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]
@@ -0,0 +1,39 @@
+# !! WARNING: Hats on the OK3506 board are installed "backwards" (facing outwards)
+
+Meta:
+  name: RAK6421 + RAK13302 Slot 2
+  support: community # Promote when tested
+  compatible:
+    - forlinx-ok3506-s12 # Armbian
+
+Lora:
+  Module: sx1262
+  IRQ: # GPIO0_B6 (IO6, physical 12)
+    pin: 14
+    gpiochip: 0
+    line: 14
+  Reset: # GPIO3_A6 (IO4, physical 18)
+    pin: 102
+    gpiochip: 3
+    line: 6
+  Busy: # GPIO0_B2 (IO5, physical 35)
+    pin: 10
+    gpiochip: 0
+    line: 10
+  # Ant_sw: # GPIO3_A7 (IO3, physical 16)
+  #   pin: 103
+  #   gpiochip: 3
+  #   line: 7
+  Enable_Pins:
+    - pin: 106 # GPIO3_B2 (physical 37)
+      gpiochip: 3
+      line: 10
+    - pin: 103 # GPIO3_A7 (physical 16)
+      gpiochip: 3
+      line: 7
+  spidev: spidev0.1
+  # CS: # GPIO0_B7 (SPI0_CSN1, physical 26)
+  #   pin: 15
+  #   gpiochip: 0
+  #   line: 15
+  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]
@@ -0,0 +1,32 @@
+# !! WARNING: Hats on the OK3506 board are installed "backwards" (facing outwards)
+
+Meta:
+  name: Waveshare SX1262
+  support: deprecated
+  compatible:
+    - forlinx-ok3506-s12 # Armbian
+
+Lora:
+  Module: sx1262  # Waveshare SX126X XXXM
+  DIO2_AS_RF_SWITCH: true
+  CS: # GPIO0_B0 (physical 40)
+    pin: 8
+    gpiochip: 0
+    line: 8
+  IRQ: # GPIO3_B0 (physical 36)
+    pin: 104
+    gpiochip: 3
+    line: 8
+  Busy: # GPIO0_B1 (physical 38)
+    pin: 9
+    gpiochip: 0
+    line: 9
+  Reset: # GPIO0_B6 (physical 12)
+    pin: 14
+    gpiochip: 0
+    line: 14
+  SX126X_ANT_SW: # GPIO3_B3 (physical 31)
+    pin: 107
+    gpiochip: 3
+    line: 11
+  spidev: spidev0.0
@@ -1,3 +1,9 @@
+Meta:
+  name: Lora Meshstick SX1262
+  support: community
+  compatible:
+    - usb
+
 Lora:
  Module: lr1121
  CS: 0
@@ -1,5 +1,11 @@
+Meta:
+  name: Pinedio USB SX1262
+  support: deprecated
+  compatible:
+    - usb
+
 Lora:
  Module: sx1262
  CS: 0 
  IRQ: 10
-  spidev: ch341
+  spidev: ch341
@@ -1,3 +1,9 @@
+Meta:
+  name: raxda-rock2f-starter-edition-hat
+  support: community
+  compatible:
+    - rock-2f # Armbian
+
 Lora:

 ### Raxda Rock 2F running Armbian Linux 6.1.99-vendor-rk35xx
@@ -1,5 +1,11 @@
 # https://www.waveshare.com/core1262-868m.htm
 # https://github.com/markbirss/lora-starter-edition-sx1262-i2c
+Meta:
+  name: lora-starter-edition-sx1262-i2c
+  support: community
+  compatible:
+    - raspberry-pi
+
 Lora:
  Module: sx1262  # Starter Edition SX1262 I2C Raspberry Pi HAT
  DIO2_AS_RF_SWITCH: true
@@ -1,3 +1,9 @@
+Meta:
+  name: meshstick-1262
+  support: official
+  compatible:
+    - usb
+
 Lora:
  Module: sx1262
  CS: 0
@@ -1,3 +1,9 @@
+Meta:
+  name: meshtoad-e22
+  support: official
+  compatible:
+    - usb
+
 Lora:
  Module: sx1262
  CS: 0
@@ -1,3 +1,9 @@
+Meta:
+  name: umesh-1262-30dbm
+  support: community
+  compatible:
+    - clockwork-uconsole
+
 Lora:
  Module: sx1262
  CS: 0
@@ -1,3 +1,9 @@
+Meta:
+  name: umesh-1268-30dbm
+  support: community
+  compatible:
+    - clockwork-uconsole
+
 Lora:
  Module: sx1268
  CS: 0
@@ -1,3 +1,9 @@
+Meta:
+  name: Waveshare SX1262
+  support: deprecated
+  compatible:
+    - raspberry-pi
+
 Lora:
  Module: sx1262  # Waveshare SX126X XXXM
  DIO2_AS_RF_SWITCH: true
@@ -1,5 +1,12 @@
 # https://www.waveshare.com/pico-lora-sx1262-868m.htm
 # https://github.com/markbirss/lora-ws-raspberry-pi-pico-to-rpi-adapter
+
+Meta:
+  name: ws-raspberry-pico-to-rpi-adapter
+  support: community
+  compatible:
+    - raspberry-pi
+
 Lora:
  Module: sx1262  # Waveshare Raspberry Pi Pico to Raspberry Pi HAT Adapter
  DIO2_AS_RF_SWITCH: true
@@ -15,6 +15,12 @@
 #   5     CS          24
 #   26    DIO1/IRQ    26

+Meta:
+  name: ws-raspberry-pico-to-orangepi-03
+  support: community
+  compatible:
+    - orange-pi-zero-3 # Armbian
+
 Lora:
  Module: sx1262  # Waveshare Raspberry Pico Lora module
  DIO2_AS_RF_SWITCH: true
@@ -43,7 +43,7 @@ for pio_env in pio_envs:
  env = {
    "ci": {"board": pio_env, "platform": env_platform},
    "board_level": cfg.get(f"env:{pio_env}", "board_level", default=None),
-    "board_check": bool(cfg.get(f"env:{pio_env}", "board_check", default=False)),
+    "board_check": cfg.get(f"env:{pio_env}", "board_check", default="false").strip().lower() == "true",
  }
  all_envs.append(env)

@@ -87,6 +87,9 @@
  </screenshots>

  <releases>
+    <release version="2.7.22" date="2026-04-06">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.22</url>
+    </release>
    <release version="2.7.21" date="2026-03-11">
      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.21</url>
    </release>
@@ -1,30 +1,30 @@
 {
  "build": {
    "arduino": {
-      "ldscript": "nrf52840_s140_v7.ld"
+      "ldscript": "nrf52840_s140_v6.ld"
    },
    "core": "nRF5",
    "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_TRACKER_T2000_C -DNRF52840_XXAA",
+    "extra_flags": "-DNRF52840_XXAA",
    "f_cpu": "64000000L",
    "hwids": [
-      ["0x239A", "0x8029"],
+      ["0x239A", "0x4405"],
      ["0x239A", "0x0029"],
      ["0x239A", "0x002A"],
-      ["0x239A", "0x802A"],
-      ["0x2886", "0x0057"]
+      ["0x2886", "0x1667"]
    ],
-    "usb_product": "T2000-BOOT",
+    "usb_product": "HT-n5262G",
    "mcu": "nrf52840",
-    "variant": "Seeed_T2000-C",
+    "variant": "heltec_mesh_node_t096",
+    "variants_dir": "variants",
    "bsp": {
      "name": "adafruit"
    },
    "softdevice": {
      "sd_flags": "-DS140",
      "sd_name": "s140",
-      "sd_version": "7.3.0",
-      "sd_fwid": "0x0123"
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
    },
    "bootloader": {
      "settings_addr": "0xFF000"
@@ -33,28 +33,22 @@
  "connectivity": ["bluetooth"],
  "debug": {
    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
    "svd_path": "nrf52840.svd",
    "openocd_target": "nrf52840-mdk-rs"
  },
  "frameworks": ["arduino"],
-  "name": "Seeed T2000-C",
+  "name": "Heltec nrf (Adafruit BSP)",
  "upload": {
    "maximum_ram_size": 248832,
    "maximum_size": 815104,
    "speed": 115200,
    "protocol": "nrfutil",
-    "protocols": [
-      "jlink",
-      "nrfjprog",
-      "nrfutil",
-      "stlink",
-      "cmsis-dap",
-      "blackmagic"
-    ],
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
    "use_1200bps_touch": true,
    "require_upload_port": true,
    "wait_for_upload_port": true
  },
-  "url": "https://www.seeedstudio.com/",
-  "vendor": "Seeed Studio"
+  "url": "https://heltec.org/",
+  "vendor": "Heltec"
 }
@@ -0,0 +1,38 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "memory_type": "qio_opi",
+      "partitions": "default_16MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=0",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "esp32s3"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "LilyGo T5-ePaper-S3",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 16777216,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://lilygo.cc/products/t5-e-paper-s3-pro",
+  "vendor": "LILYGO"
+}
@@ -0,0 +1,29 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32_out.ld"
+    },
+    "core": "esp32",
+    "extra_flags": "-DARDUINO_T_Beam",
+    "f_cpu": "240000000L",
+    "f_flash": "40000000L",
+    "flash_mode": "dio",
+    "mcu": "esp32",
+    "variant": "tbeam"
+  },
+  "connectivity": ["wifi", "bluetooth", "can", "ethernet"],
+  "debug": {
+    "openocd_board": "esp-wroom-32.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "TTGO T-Beam (PSRAM Disabled)",
+  "upload": {
+    "flash_size": "4MB",
+    "maximum_ram_size": 1310720,
+    "maximum_size": 4194304,
+    "require_upload_port": true,
+    "speed": 460800
+  },
+  "url": "https://github.com/LilyGO/TTGO-T-Beam",
+  "vendor": "TTGO"
+}
@@ -1,3 +1,9 @@
+meshtasticd (2.7.22.0) unstable; urgency=medium
+
+  * Version 2.7.22
+
+ -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Mon, 06 Apr 2026 11:34:12 +0000
+
 meshtasticd (2.7.21.0) unstable; urgency=medium

  * Version 2.7.21
@@ -27,5 +27,10 @@ rm -rf debian/changelog
 dch --create --distribution "$SERIES" --package "$package" --newversion "$PKG_VERSION~$SERIES" \
 	"GitHub Actions Automatic packaging for $PKG_VERSION~$SERIES"

-# Build the source deb
-debuild -S -nc -k"$GPG_KEY_ID"
+if [[ -n $GPG_KEY_ID ]]; then
+	# Build and sign the source deb
+	debuild -S -nc -k"$GPG_KEY_ID"
+else
+	# Build the source deb without signing (forks)
+	debuild -S -nc
+fi
@@ -77,10 +77,10 @@ lib_deps =
 	https://github.com/meshtastic/TinyGPSPlus/archive/71a82db35f3b973440044c476d4bcdc673b104f4.zip
 	# renovate: datasource=git-refs depName=meshtastic-ArduinoThread packageName=https://github.com/meshtastic/ArduinoThread gitBranch=master
 	https://github.com/meshtastic/ArduinoThread/archive/b841b0415721f1341ea41cccfb4adccfaf951567.zip
-	# renovate: datasource=custom.pio depName=Nanopb packageName=nanopb/library/Nanopb
-	nanopb/Nanopb@0.4.91
-	# renovate: datasource=custom.pio depName=ErriezCRC32 packageName=erriez/library/ErriezCRC32
-	erriez/ErriezCRC32@1.0.1
+	# renovate: datasource=github-tags depName=Nanopb packageName=nanopb/nanopb
+	https://github.com/nanopb/nanopb/archive/refs/tags/nanopb-0.4.9.1.zip
+	# renovate: datasource=github-tags depName=ErriezCRC32 packageName=Erriez/ErriezCRC32
+	https://github.com/Erriez/ErriezCRC32/archive/refs/tags/1.0.1.zip

 ; Used for the code analysis in PIO Home / Inspect
 check_tool = cppcheck
@@ -95,143 +95,153 @@ check_flags =
 framework = arduino
 lib_deps =
 	${env.lib_deps}
-	# renovate: datasource=custom.pio depName=NonBlockingRTTTL packageName=end2endzone/library/NonBlockingRTTTL
-	end2endzone/NonBlockingRTTTL@1.4.0
+	# renovate: datasource=github-tags depName=NonBlockingRTTTL packageName=end2endzone/NonBlockingRTTTL
+	https://github.com/end2endzone/NonBlockingRTTTL/archive/refs/tags/1.4.0.zip
 build_unflags =
 	-std=c++11
 	-std=gnu++11
 build_flags = ${env.build_flags} -Os
 	-std=gnu++17
-build_src_filter = ${env.build_src_filter} -<platform/portduino/> -<graphics/niche/>
+build_src_filter = ${env.build_src_filter} -<platform/portduino/> -<graphics/niche/> -<modules/Native/>

 ; Common libs for communicating over TCP/IP networks such as MQTT
 [networking_base]
 lib_deps =
-	# renovate: datasource=custom.pio depName=TBPubSubClient packageName=thingsboard/library/TBPubSubClient
-	thingsboard/TBPubSubClient@2.12.1
-	# renovate: datasource=custom.pio depName=NTPClient packageName=arduino-libraries/library/NTPClient
-	arduino-libraries/NTPClient@3.2.1
+	# renovate: datasource=github-tags depName=TBPubSubClient packageName=thingsboard/pubsubclient
+	https://github.com/thingsboard/pubsubclient/archive/refs/tags/v2.12.1.zip
+	# renovate: datasource=github-tags depName=NTPClient packageName=arduino-libraries/NTPClient
+	https://github.com/arduino-libraries/NTPClient/archive/refs/tags/3.2.1.zip

 ; Extra TCP/IP networking libs for supported devices
 [networking_extra]
 lib_deps =
-	# renovate: datasource=custom.pio depName=Syslog packageName=arcao/library/Syslog
-	arcao/Syslog@2.0.0
+	# renovate: datasource=github-tags depName=Syslog packageName=arcao/Syslog
+	https://github.com/arcao/Syslog/archive/refs/tags/v2.0.zip

 [radiolib_base]
 lib_deps =
-	# renovate: datasource=custom.pio depName=RadioLib packageName=jgromes/library/RadioLib
-	jgromes/RadioLib@7.6.0
+	# renovate: datasource=github-tags depName=RadioLib packageName=jgromes/RadioLib
+	https://github.com/jgromes/RadioLib/archive/refs/tags/7.6.0.zip

 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/622b034d8791153de9d16a473723cb8625d35839.zip
+	https://github.com/meshtastic/device-ui/archive/1897dd17fceb1f101bb1a3245680aa3439edcfdd.zip

 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
 lib_deps =
-	# renovate: datasource=custom.pio depName=Adafruit BusIO packageName=adafruit/library/Adafruit BusIO
-	adafruit/Adafruit BusIO@1.17.4
-	# renovate: datasource=custom.pio depName=Adafruit Unified Sensor packageName=adafruit/library/Adafruit Unified Sensor
-	adafruit/Adafruit Unified Sensor@1.1.15
-	# renovate: datasource=custom.pio depName=Adafruit BMP280 packageName=adafruit/library/Adafruit BMP280 Library
-	adafruit/Adafruit BMP280 Library@3.0.0
-	# renovate: datasource=custom.pio depName=Adafruit BMP085 packageName=adafruit/library/Adafruit BMP085 Library
-	adafruit/Adafruit BMP085 Library@1.2.4
-	# renovate: datasource=custom.pio depName=Adafruit BME280 packageName=adafruit/library/Adafruit BME280 Library
-	adafruit/Adafruit BME280 Library@2.3.0
-	# renovate: datasource=custom.pio depName=Adafruit DPS310 packageName=adafruit/library/Adafruit DPS310
-	adafruit/Adafruit DPS310@1.1.6
-	# renovate: datasource=custom.pio depName=Adafruit MCP9808 packageName=adafruit/library/Adafruit MCP9808 Library
-	adafruit/Adafruit MCP9808 Library@2.0.2
-	# renovate: datasource=custom.pio depName=Adafruit INA260 packageName=adafruit/library/Adafruit INA260 Library
-	adafruit/Adafruit INA260 Library@1.5.3
-	# renovate: datasource=custom.pio depName=Adafruit INA219 packageName=adafruit/library/Adafruit INA219
-	adafruit/Adafruit INA219@1.2.3
-	# renovate: datasource=custom.pio depName=Adafruit MPU6050 packageName=adafruit/library/Adafruit MPU6050
-	adafruit/Adafruit MPU6050@2.2.9
-	# renovate: datasource=custom.pio depName=Adafruit LIS3DH packageName=adafruit/library/Adafruit LIS3DH
-	adafruit/Adafruit LIS3DH@1.3.0
-	# renovate: datasource=custom.pio depName=Adafruit AHTX0 packageName=adafruit/library/Adafruit AHTX0
-	adafruit/Adafruit AHTX0@2.0.6
-	# renovate: datasource=custom.pio depName=Adafruit LSM6DS packageName=adafruit/library/Adafruit LSM6DS
-	adafruit/Adafruit LSM6DS@4.7.4
-	# renovate: datasource=custom.pio depName=Adafruit TSL2591 packageName=adafruit/library/Adafruit TSL2591 Library
-	adafruit/Adafruit TSL2591 Library@1.4.5
-	# renovate: datasource=custom.pio depName=EmotiBit MLX90632 packageName=emotibit/library/EmotiBit MLX90632
-	emotibit/EmotiBit MLX90632@1.0.8
-	# renovate: datasource=custom.pio depName=Adafruit MLX90614 packageName=adafruit/library/Adafruit MLX90614 Library
-	adafruit/Adafruit MLX90614 Library@2.1.6
+	# renovate: datasource=github-tags depName=Adafruit BusIO packageName=adafruit/Adafruit_BusIO
+	https://github.com/adafruit/Adafruit_BusIO/archive/refs/tags/1.17.4.zip
+	# renovate: datasource=github-tags depName=Adafruit Unified Sensor packageName=adafruit/Adafruit_Sensor
+	https://github.com/adafruit/Adafruit_Sensor/archive/refs/tags/1.1.15.zip
+	# renovate: datasource=github-tags depName=Adafruit GFX packageName=adafruit/Adafruit-GFX-Library
+	https://github.com/adafruit/Adafruit-GFX-Library/archive/refs/tags/1.12.6.zip
+	# renovate: datasource=github-tags depName=NeoPixel packageName=adafruit/Adafruit_NeoPixel
+	https://github.com/adafruit/Adafruit_NeoPixel/archive/refs/tags/1.15.4.zip
+	# renovate: datasource=github-tags depName=Adafruit SSD1306 packageName=adafruit/Adafruit_SSD1306
+	https://github.com/adafruit/Adafruit_SSD1306/archive/refs/tags/2.5.16.zip
+	# renovate: datasource=github-tags depName=Adafruit BMP280 packageName=adafruit/Adafruit_BMP280_Library
+	https://github.com/adafruit/Adafruit_BMP280_Library/archive/refs/tags/3.0.0.zip
+	# renovate: datasource=github-tags depName=Adafruit BMP085 packageName=adafruit/Adafruit-BMP085-Library
+	https://github.com/adafruit/Adafruit-BMP085-Library/archive/refs/tags/1.2.4.zip
+	# renovate: datasource=github-tags depName=Adafruit BME280 packageName=adafruit/Adafruit_BME280_Library
+	https://github.com/adafruit/Adafruit_BME280_Library/archive/refs/tags/2.3.0.zip
+	# renovate: datasource=github-tags depName=Adafruit DPS310 packageName=adafruit/Adafruit_DPS310
+	https://github.com/adafruit/Adafruit_DPS310/archive/refs/tags/1.1.6.zip
+	# renovate: datasource=github-tags depName=Adafruit SH110x packageName=adafruit/Adafruit_SH110x
+	https://github.com/adafruit/Adafruit_SH110x/archive/refs/tags/2.1.14.zip
+	# renovate: datasource=github-tags depName=Adafruit MCP9808 packageName=adafruit/Adafruit_MCP9808_Library
+	https://github.com/adafruit/Adafruit_MCP9808_Library/archive/refs/tags/2.0.2.zip
+	# renovate: datasource=github-tags depName=Adafruit INA260 packageName=adafruit/Adafruit_INA260
+	https://github.com/adafruit/Adafruit_INA260/archive/refs/tags/1.5.3.zip
+	# renovate: datasource=github-tags depName=Adafruit INA219 packageName=adafruit/Adafruit_INA219
+	https://github.com/adafruit/Adafruit_INA219/archive/refs/tags/1.2.3.zip
+	# renovate: datasource=github-tags depName=Adafruit MPU6050 packageName=adafruit/Adafruit_MPU6050
+	https://github.com/adafruit/Adafruit_MPU6050/archive/refs/tags/2.2.9.zip
+	# renovate: datasource=github-tags depName=Adafruit LIS3DH packageName=adafruit/Adafruit_LIS3DH
+	https://github.com/adafruit/Adafruit_LIS3DH/archive/refs/tags/1.3.0.zip
+	# renovate: datasource=github-tags depName=Adafruit AHTX0 packageName=adafruit/Adafruit_AHTX0
+	https://github.com/adafruit/Adafruit_AHTX0/archive/refs/tags/2.0.6.zip
+	# renovate: datasource=github-tags depName=Adafruit LSM6DS packageName=adafruit/Adafruit_LSM6DS
+	https://github.com/adafruit/Adafruit_LSM6DS/archive/refs/tags/4.7.4.zip
+	# renovate: datasource=github-tags depName=Adafruit TSL2591 packageName=adafruit/Adafruit_TSL2591_Library
+	https://github.com/adafruit/Adafruit_TSL2591_Library/archive/refs/tags/1.4.5.zip
+	# renovate: datasource=github-tags depName=EmotiBit MLX90632 packageName=emotibit/EmotiBit_MLX90632
+	https://github.com/EmotiBit/EmotiBit_MLX90632/archive/refs/tags/v1.0.8.zip
+	# renovate: datasource=github-tags depName=Adafruit MLX90614 packageName=adafruit/Adafruit_MLX90614
+	https://github.com/adafruit/Adafruit-MLX90614-Library/archive/refs/tags/2.1.6.zip
 	# renovate: datasource=git-refs depName=INA3221 packageName=https://github.com/sgtwilko/INA3221 gitBranch=FixOverflow
 	https://github.com/sgtwilko/INA3221/archive/bb03d7e9bfcc74fc798838a54f4f99738f29fc6a.zip
-	# renovate: datasource=custom.pio depName=QMC5883L Compass packageName=mprograms/library/QMC5883LCompass
-	mprograms/QMC5883LCompass@1.2.3
-	# renovate: datasource=custom.pio depName=DFRobot_RTU packageName=dfrobot/library/DFRobot_RTU
-	dfrobot/DFRobot_RTU@1.0.6
+	# renovate: datasource=github-tags depName=QMC5883L Compass packageName=mprograms/QMC5883LCompass
+	https://github.com/mprograms/QMC5883LCompass/archive/refs/tags/v1.2.3.zip
+	# renovate: datasource=github-tags depName=DFRobot_RTU packageName=dfrobot/DFRobot_RTU
+	https://github.com/DFRobot/DFRobot_RTU/archive/refs/tags/V1.0.6.zip
 	# renovate: datasource=git-refs depName=DFRobot_RainfallSensor packageName=https://github.com/DFRobot/DFRobot_RainfallSensor gitBranch=master
 	https://github.com/DFRobot/DFRobot_RainfallSensor/archive/38fea5e02b40a5430be6dab39a99a6f6347d667e.zip
-	# renovate: datasource=custom.pio depName=INA226 packageName=robtillaart/library/INA226
-	robtillaart/INA226@0.6.6
-	# renovate: datasource=custom.pio depName=SparkFun MAX3010x packageName=sparkfun/library/SparkFun MAX3010x Pulse and Proximity Sensor Library
-	sparkfun/SparkFun MAX3010x Pulse and Proximity Sensor Library@1.1.2
-	# renovate: datasource=custom.pio depName=SparkFun 9DoF IMU Breakout ICM 20948 packageName=sparkfun/library/SparkFun 9DoF IMU Breakout - ICM 20948 - Arduino Library
-	sparkfun/SparkFun 9DoF IMU Breakout - ICM 20948 - Arduino Library@1.3.2
-	# renovate: datasource=custom.pio depName=Adafruit LTR390 Library packageName=adafruit/library/Adafruit LTR390 Library
-	adafruit/Adafruit LTR390 Library@1.1.2
-	# renovate: datasource=custom.pio depName=Adafruit PCT2075 packageName=adafruit/library/Adafruit PCT2075
-	adafruit/Adafruit PCT2075@1.0.6
-	# renovate: datasource=custom.pio depName=DFRobot_BMM150 packageName=dfrobot/library/DFRobot_BMM150
-	dfrobot/DFRobot_BMM150@1.0.0
-	# renovate: datasource=custom.pio depName=Adafruit_TSL2561 packageName=adafruit/library/Adafruit TSL2561
-	adafruit/Adafruit TSL2561@1.1.3
-	# renovate: datasource=custom.pio depName=BH1750_WE packageName=wollewald/library/BH1750_WE
-	wollewald/BH1750_WE@1.1.10
+	# renovate: datasource=github-tags depName=INA226 packageName=robtillaart/INA226
+	https://github.com/RobTillaart/INA226/archive/refs/tags/0.6.6.zip
+	# renovate: datasource=github-tags depName=SparkFun MAX3010x packageName=sparkfun/SparkFun_MAX3010x_Sensor_Library
+	https://github.com/sparkfun/SparkFun_MAX3010x_Sensor_Library/archive/refs/tags/v1.1.2.zip
+	# renovate: datasource=github-tags depName=SparkFun 9DoF IMU Breakout ICM 20948 packageName=sparkfun/SparkFun_ICM-20948_ArduinoLibrary
+	https://github.com/sparkfun/SparkFun_ICM-20948_ArduinoLibrary/archive/refs/tags/v1.3.2.zip
+	# renovate: datasource=github-tags depName=Adafruit LTR390 Library packageName=adafruit/Adafruit_LTR390
+	https://github.com/adafruit/Adafruit_LTR390/archive/refs/tags/1.1.2.zip
+	# renovate: datasource=github-tags depName=Adafruit PCT2075 packageName=adafruit/Adafruit_PCT2075
+	https://github.com/adafruit/Adafruit_PCT2075/archive/refs/tags/1.0.6.zip
+	# renovate: datasource=github-tags depName=DFRobot_BMM150 packageName=dfrobot/DFRobot_BMM150
+	https://github.com/DFRobot/DFRobot_BMM150/archive/refs/tags/V1.0.0.zip
+	# renovate: datasource=github-tags depName=Adafruit_TSL2561 packageName=adafruit/Adafruit_TSL2561
+	https://github.com/adafruit/Adafruit_TSL2561/archive/refs/tags/1.1.3.zip
+	# renovate: datasource=github-tags depName=BH1750_WE packageName=wollewald/BH1750_WE
+	https://github.com/wollewald/BH1750_WE/archive/refs/tags/1.1.10.zip

 ; Common environmental sensor libraries (not included in native / portduino)
 [environmental_extra_common]
 lib_deps =
-	# renovate: datasource=custom.pio depName=Adafruit BMP3XX packageName=adafruit/library/Adafruit BMP3XX Library
-	adafruit/Adafruit BMP3XX Library@2.1.6
-	# renovate: datasource=custom.pio depName=Adafruit MAX1704X packageName=adafruit/library/Adafruit MAX1704X
-	adafruit/Adafruit MAX1704X@1.0.3
-	# renovate: datasource=custom.pio depName=Adafruit SHTC3 packageName=adafruit/library/Adafruit SHTC3 Library
-	adafruit/Adafruit SHTC3 Library@1.0.2
-	# renovate: datasource=custom.pio depName=Adafruit LPS2X packageName=adafruit/library/Adafruit LPS2X
-	adafruit/Adafruit LPS2X@2.0.6
-	# renovate: datasource=custom.pio depName=Adafruit SHT31 packageName=adafruit/library/Adafruit SHT31 Library
-	adafruit/Adafruit SHT31 Library@2.2.2
-	# renovate: datasource=custom.pio depName=Adafruit VEML7700 packageName=adafruit/library/Adafruit VEML7700 Library
-	adafruit/Adafruit VEML7700 Library@2.1.6
-	# renovate: datasource=custom.pio depName=Adafruit SHT4x packageName=adafruit/library/Adafruit SHT4x Library
-	adafruit/Adafruit SHT4x Library@1.0.5
-	# renovate: datasource=custom.pio depName=SparkFun Qwiic Scale NAU7802 packageName=sparkfun/library/SparkFun Qwiic Scale NAU7802 Arduino Library
-	sparkfun/SparkFun Qwiic Scale NAU7802 Arduino Library@1.0.6
+	# renovate: datasource=github-tags depName=Adafruit BMP3XX packageName=adafruit/Adafruit_BMP3XX
+	https://github.com/adafruit/Adafruit_BMP3XX/archive/refs/tags/2.1.6.zip
+	# renovate: datasource=github-tags depName=Adafruit MAX1704X packageName=adafruit/Adafruit_MAX1704X
+	https://github.com/adafruit/Adafruit_MAX1704X/archive/refs/tags/1.0.3.zip
+	# renovate: datasource=github-tags depName=Adafruit SHTC3 packageName=adafruit/Adafruit_SHTC3
+	https://github.com/adafruit/Adafruit_SHTC3/archive/refs/tags/1.0.2.zip
+	# renovate: datasource=github-tags depName=Adafruit LPS2X packageName=adafruit/Adafruit_LPS2X
+	https://github.com/adafruit/Adafruit_LPS2X/archive/refs/tags/2.0.6.zip
+	# renovate: datasource=github-tags depName=Adafruit SHT31 packageName=adafruit/Adafruit_SHT31
+	https://github.com/adafruit/Adafruit_SHT31/archive/refs/tags/2.2.2.zip
+	# renovate: datasource=github-tags depName=Adafruit VEML7700 packageName=adafruit/Adafruit_VEML7700
+	https://github.com/adafruit/Adafruit_VEML7700/archive/refs/tags/2.1.6.zip
+	# renovate: datasource=github-tags depName=Adafruit SHT4x packageName=adafruit/Adafruit_SHT4X
+	https://github.com/adafruit/Adafruit_SHT4X/archive/refs/tags/1.0.5.zip
+	# renovate: datasource=github-tags depName=SparkFun Qwiic Scale NAU7802 packageName=sparkfun/SparkFun_Qwiic_Scale_NAU7802_Arduino_Library
+	https://github.com/sparkfun/SparkFun_Qwiic_Scale_NAU7802_Arduino_Library/archive/refs/tags/v1.0.6.zip
 	# renovate: datasource=custom.pio depName=ClosedCube OPT3001 packageName=closedcube/library/ClosedCube OPT3001
 	closedcube/ClosedCube OPT3001@1.1.2
 	# renovate: datasource=git-refs depName=meshtastic-DFRobot_LarkWeatherStation packageName=https://github.com/meshtastic/DFRobot_LarkWeatherStation gitBranch=master
 	https://github.com/meshtastic/DFRobot_LarkWeatherStation/archive/4de3a9cadef0f6a5220a8a906cf9775b02b0040d.zip
-	# renovate: datasource=custom.pio depName=Sensirion Core packageName=sensirion/library/Sensirion Core
-	sensirion/Sensirion Core@0.7.3
-	# renovate: datasource=custom.pio depName=Sensirion I2C SCD4x packageName=sensirion/library/Sensirion I2C SCD4x
-	sensirion/Sensirion I2C SCD4x@1.1.0
-	# renovate: datasource=custom.pio depName=Sensirion I2C SFA3x packageName=sensirion/library/Sensirion I2C SFA3x
-	sensirion/Sensirion I2C SFA3x@1.0.0
-	# renovate: datasource=custom.pio depName=Sensirion I2C SCD30 packageName=sensirion/library/Sensirion I2C SCD30
-	sensirion/Sensirion I2C SCD30@1.0.0
+	# renovate: datasource=github-tags depName=Sensirion Core packageName=sensirion/arduino-core
+	https://github.com/Sensirion/arduino-core/archive/refs/tags/0.7.3.zip
+	# renovate: datasource=github-tags depName=Sensirion I2C SCD4x packageName=sensirion/arduino-i2c-scd4x
+	https://github.com/Sensirion/arduino-i2c-scd4x/archive/refs/tags/1.1.0.zip
+	# renovate: datasource=github-tags depName=Sensirion I2C SFA3x packageName=sensirion/arduino-i2c-sfa3x
+	https://github.com/Sensirion/arduino-i2c-sfa3x/archive/refs/tags/1.0.0.zip
+	# renovate: datasource=github-tags depName=Sensirion I2C SCD30 packageName=sensirion/arduino-i2c-scd30
+	https://github.com/Sensirion/arduino-i2c-scd30/archive/refs/tags/1.0.0.zip
+	# renovate: datasource=github-tags depName=arduino-sht packageName=sensirion/arduino-sht
+	https://github.com/Sensirion/arduino-sht/archive/refs/tags/v1.2.6.zip

 ; Environmental sensors with BSEC2 (Bosch proprietary IAQ)
 [environmental_extra]
 lib_deps =
 	${environmental_extra_common.lib_deps}
-	# renovate: datasource=custom.pio depName=Bosch BSEC2 packageName=boschsensortec/library/bsec2
-	boschsensortec/bsec2@1.10.2610
-	# renovate: datasource=custom.pio depName=Bosch BME68x packageName=boschsensortec/library/BME68x Sensor Library
-	boschsensortec/BME68x Sensor Library@1.3.40408
+	# renovate: datasource=github-tags depName=Bosch BSEC2 packageName=boschsensortec/Bosch-BSEC2-Library
+	https://github.com/boschsensortec/Bosch-BSEC2-Library/archive/refs/tags/1.10.2610.zip
+	# renovate: datasource=github-tags depName=Bosch BME68x packageName=boschsensortec/Bosch-BME68x-Library
+	https://github.com/boschsensortec/Bosch-BME68x-Library/archive/refs/tags/v1.3.40408.zip

 ; Environmental sensors without BSEC (saves ~3.5KB DRAM for original ESP32 targets)
 [environmental_extra_no_bsec]
 lib_deps =
 	${environmental_extra_common.lib_deps}
-	# renovate: datasource=custom.pio depName=adafruit/Adafruit BME680 Library packageName=adafruit/library/Adafruit BME680
-	adafruit/Adafruit BME680 Library@^2.0.5
+	# renovate: datasource=github-tags depName=Adafruit_BME680 packageName=adafruit/Adafruit_BME680
+	https://github.com/adafruit/Adafruit_BME680/archive/refs/tags/2.0.6.zip
@@ -4,6 +4,8 @@
    ":dependencyDashboard",
    ":semanticCommitTypeAll(chore)",
    ":ignoreModulesAndTests",
+    ":noUnscheduledUpdates",
+    "schedule:daily",
    "group:recommended",
    "replacements:all",
    "workarounds:all"
@@ -98,7 +98,6 @@ Syslog &Syslog::logMask(uint8_t priMask)

 void Syslog::enable()
 {
-    this->_client->begin(this->_port);
    this->_enabled = true;
 }

@@ -166,14 +165,21 @@ inline bool Syslog::_sendLog(uint16_t pri, const char *appName, const char *mess
    if ((pri & LOG_FACMASK) == 0)
        pri = LOG_MAKEPRI(LOG_FAC(this->_priDefault), pri);

+    // W5100S: acquire UDP socket on-demand to avoid permanent socket consumption
+    if (!this->_client->begin(this->_port)) {
+        return false;
+    }
+
    if (this->_server != NULL) {
        result = this->_client->beginPacket(this->_server, this->_port);
    } else {
        result = this->_client->beginPacket(this->_ip, this->_port);
    }

-    if (result != 1)
+    if (result != 1) {
+        this->_client->stop();
        return false;
+    }

    this->_client->print('<');
    this->_client->print(pri);
@@ -193,6 +199,8 @@ inline bool Syslog::_sendLog(uint16_t pri, const char *appName, const char *mess
    this->_client->print(message);
    this->_client->endPacket();

+    this->_client->stop(); // W5100S: release UDP socket for other services
+
    return true;
 }

@@ -4,7 +4,8 @@ const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaC
                                                         bool usePreset)
 {

-    // If use_preset is false, always return "Custom"
+    // If use_preset is false, always return "Custom" — callers such as RadioInterface and Channels
+    // rely on this being a stable literal for channel-name hashing and default-channel detection.
    if (!usePreset) {
        return "Custom";
    }
@@ -35,6 +35,11 @@
 #include "nrfx_power.h"
 #endif

+#if defined(ARCH_NRF52)
+#include "Nrf52SaadcLock.h"
+#include "concurrency/LockGuard.h"
+#endif
+
 #if defined(DEBUG_HEAP_MQTT) && !MESHTASTIC_EXCLUDE_MQTT
 #include "mqtt/MQTT.h"
 #include "target_specific.h"
@@ -328,6 +333,9 @@ class AnalogBatteryLevel : public HasBatteryLevel
            scaled = esp_adc_cal_raw_to_voltage(raw, adc_characs);
            scaled *= operativeAdcMultiplier;
 #else // block for all other platforms
+#ifdef ARCH_NRF52
+            concurrency::LockGuard saadcGuard(concurrency::nrf52SaadcLock);
+#endif
            for (uint32_t i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
                raw += analogRead(BATTERY_PIN);
            }
@@ -137,7 +137,7 @@ void RedirectablePrint::log_to_serial(const char *logLevel, const char *format,
        if (color) {
            ::printf("\u001b[0m");
        }
-        ::printf("| %02d:%02d:%02d %u ", hour, min, sec, millis() / 1000);
+        ::printf("| %02d:%02d:%02d %u.%03u ", hour, min, sec, millis() / 1000, millis() % 1000);
 #else
        printf("%s ", logLevel);
        if (color) {
@@ -151,7 +151,7 @@ void RedirectablePrint::log_to_serial(const char *logLevel, const char *format,
        if (color) {
            ::printf("\u001b[0m");
        }
-        ::printf("| ??:??:?? %u ", millis() / 1000);
+        ::printf("| ??:??:?? %u.%03u ", millis() / 1000, millis() % 1000);
 #else
        printf("%s ", logLevel);
        if (color) {
@@ -6,6 +6,11 @@
 #include "Tone.h"
 #endif

+#if defined(HAS_I2S)
+#include "main.h"
+#include <unordered_map>
+#endif
+
 #if !defined(ARCH_PORTDUINO)
 extern "C" void delay(uint32_t dwMs);
 #endif
@@ -50,6 +55,50 @@ const int DURATION_1_2 = 500;  // 1/2 note
 const int DURATION_3_4 = 750;  // 3/4 note
 const int DURATION_1_1 = 1000; // 1/1 note

+#ifdef HAS_I2S
+void playTonesRTTTL(const ToneDuration *tone_durations, int size)
+{
+    // translate ToneDuration[] to RTTTL string and play using audioThread
+    static std::unordered_map<int, std::string> freqToNote = {
+        {NOTE_C3, "c4"},   {NOTE_CS3, "c#4"}, {NOTE_D3, "d4"},   {NOTE_DS3, "d#4"}, {NOTE_E3, "e4"},   {NOTE_F3, "f4"},
+        {NOTE_FS3, "f#4"}, {NOTE_G3, "g4"},   {NOTE_GS3, "g#4"}, {NOTE_A3, "a4"},   {NOTE_AS3, "a#4"}, {NOTE_B3, "b4"},
+        {NOTE_C4, "c5"},   {NOTE_E4, "e5"},   {NOTE_G4, "g5"},   {NOTE_A4, "a5"},   {NOTE_C5, "c6"},   {NOTE_E5, "e6"},
+        {NOTE_G5, "g6"},   {NOTE_F5, "f6"},   {NOTE_G6, "g7"},   {NOTE_E7, "e8"}};
+
+    char rtttl[128] = "tone:d=32,o=4,b=200:"; // default duration and octave
+    for (int i = 0; i < size; i++) {
+        const auto &td = tone_durations[i];
+        std::string note = "b4";
+        if (freqToNote.find(td.frequency_khz) != freqToNote.end()) {
+            note = freqToNote[td.frequency_khz];
+        }
+        int dur = 32; // default duration
+        if (td.duration_ms >= 1000)
+            dur = 1;
+        else if (td.duration_ms >= 500)
+            dur = 2;
+        else if (td.duration_ms >= 250)
+            dur = 4;
+        else if (td.duration_ms >= 125)
+            dur = 8;
+        else if (td.duration_ms >= 62)
+            dur = 16;
+        else
+            dur = 32;
+
+        char noteStr[64];
+        snprintf(noteStr, sizeof(noteStr), "%s,%d", note.c_str(), dur);
+        strncat(rtttl, noteStr, sizeof(rtttl) - strlen(rtttl) - 1);
+
+        audioThread->beginRttl(rtttl, strlen(rtttl));
+        while (audioThread->isPlaying()) {
+            delay(10);
+        }
+        return;
+    }
+}
+#endif
+
 void playTones(const ToneDuration *tone_durations, int size)
 {
    if (config.device.buzzer_mode == meshtastic_Config_DeviceConfig_BuzzerMode_DISABLED ||
@@ -57,7 +106,13 @@ void playTones(const ToneDuration *tone_durations, int size)
        // Buzzer is disabled or not set to system tones
        return;
    }
-#ifdef PIN_BUZZER
+#ifdef HAS_I2S
+    if (moduleConfig.external_notification.use_i2s_as_buzzer && audioThread) {
+        playTonesRTTTL(tone_durations, size);
+        return;
+    }
+#endif
+#if defined(PIN_BUZZER)
    if (!config.device.buzzer_gpio)
        config.device.buzzer_gpio = PIN_BUZZER;
 #endif
@@ -1,10 +1,85 @@
 #include "concurrency/BinarySemaphorePosix.h"
 #include "configuration.h"

+#include <errno.h>
+#include <sys/time.h>
+
 #ifndef HAS_FREE_RTOS

 namespace concurrency
 {
+#ifdef ARCH_PORTDUINO
+
+BinarySemaphorePosix::BinarySemaphorePosix()
+{
+    if (pthread_mutex_init(&mutex, NULL) != 0) {
+        throw std::runtime_error("pthread_mutex_init failed");
+    }
+    if (pthread_cond_init(&cond, NULL) != 0) {
+        pthread_mutex_destroy(&mutex);
+        throw std::runtime_error("pthread_cond_init failed");
+    }
+    signaled = false;
+}
+
+BinarySemaphorePosix::~BinarySemaphorePosix()
+{
+    pthread_cond_destroy(&cond);
+    pthread_mutex_destroy(&mutex);
+}
+
+/**
+ * Returns false if we timed out
+ */
+bool BinarySemaphorePosix::take(uint32_t msec)
+{
+    pthread_mutex_lock(&mutex);
+
+    if (!signaled) {
+        struct timespec ts;
+        clock_gettime(CLOCK_REALTIME, &ts);
+
+        ts.tv_sec += msec / 1000;
+        ts.tv_nsec += (msec % 1000) * 1000000L;
+        if (ts.tv_nsec >= 1000000000L) {
+            ts.tv_sec += 1;
+            ts.tv_nsec -= 1000000000L;
+        }
+
+        while (!signaled) {
+            int rc = pthread_cond_timedwait(&cond, &mutex, &ts);
+            if (rc == ETIMEDOUT)
+                break;
+            if (rc != 0) {
+                // Some other error occurred
+                pthread_mutex_unlock(&mutex);
+                throw std::runtime_error("pthread_cond_timedwait failed: " + std::to_string(rc));
+            }
+        }
+    }
+
+    bool wasSignaled = signaled;
+    signaled = false; // consume the signal (binary semaphore)
+
+    pthread_mutex_unlock(&mutex);
+    return wasSignaled;
+}
+
+void BinarySemaphorePosix::give()
+{
+    pthread_mutex_lock(&mutex);
+    signaled = true;
+    pthread_cond_signal(&cond);
+    pthread_mutex_unlock(&mutex);
+}
+
+IRAM_ATTR void BinarySemaphorePosix::giveFromISR(BaseType_t *pxHigherPriorityTaskWoken)
+{
+    give();
+    if (pxHigherPriorityTaskWoken)
+        *pxHigherPriorityTaskWoken = true;
+}
+#else

 BinarySemaphorePosix::BinarySemaphorePosix() {}

@@ -22,7 +97,8 @@ bool BinarySemaphorePosix::take(uint32_t msec)
 void BinarySemaphorePosix::give() {}

 IRAM_ATTR void BinarySemaphorePosix::giveFromISR(BaseType_t *pxHigherPriorityTaskWoken) {}
+#endif

 } // namespace concurrency

-#endif
+#endif
@@ -2,6 +2,10 @@

 #include "../freertosinc.h"

+#ifdef ARCH_PORTDUINO
+#include <pthread.h>
+#endif
+
 namespace concurrency
 {

@@ -9,7 +13,12 @@ namespace concurrency

 class BinarySemaphorePosix
 {
-    // SemaphoreHandle_t semaphore;
+
+#ifdef ARCH_PORTDUINO
+    pthread_mutex_t mutex;
+    pthread_cond_t cond;
+    bool signaled;
+#endif

  public:
    BinarySemaphorePosix();
@@ -27,4 +36,4 @@ class BinarySemaphorePosix

 #endif

-} // namespace concurrency
+} // namespace concurrency
@@ -156,8 +156,19 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.

 #ifdef USE_KCT8103L_PA
 // Power Amps are often non-linear, so we can use an array of values for the power curve
+#if defined(HELTEC_WIRELESS_TRACKER_V2)
 #define NUM_PA_POINTS 22
 #define TX_GAIN_LORA 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 13, 13, 13, 12, 12, 11, 10, 9, 8, 7
+#elif defined(HELTEC_MESH_NODE_T096)
+#define NUM_PA_POINTS 22
+#define TX_GAIN_LORA 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 13, 13, 13, 12, 11, 10, 9, 8, 7
+#else
+// If a board enables USE_KCT8103L_PA but does not match a known variant and has
+// not already provided a PA curve, fail at compile time to avoid unsafe defaults.
+#if !defined(NUM_PA_POINTS) || !defined(TX_GAIN_LORA)
+#error "USE_KCT8103L_PA is defined, but no PA gain curve (NUM_PA_POINTS / TX_GAIN_LORA) is configured for this board."
+#endif
+#endif
 #endif

 #ifdef RAK13302
@@ -220,7 +231,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BME_ADDR 0x76
 #define BME_ADDR_ALTERNATE 0x77
 #define MCP9808_ADDR 0x18
-#define INA_ADDR 0x40
+#define INA_ADDR 0x40 // same as SHT2X
 #define INA_ADDR_ALTERNATE 0x41
 #define INA_ADDR_WAVESHARE_UPS 0x43
 #define INA3221_ADDR 0x42
@@ -233,8 +244,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LPS22HB_ADDR 0x5C
 #define LPS22HB_ADDR_ALT 0x5D
 #define SFA30_ADDR 0x5D
-#define SHT31_4x_ADDR 0x44
-#define SHT31_4x_ADDR_ALT 0x45
+#define SHTXX_ADDR 0x44
+#define SHTXX_ADDR_ALT 0x45
 #define PMSA003I_ADDR 0x12
 #define QMA6100P_ADDR 0x12
 #define AHT10_ADDR 0x38
@@ -37,9 +37,8 @@ ScanI2C::FoundDevice ScanI2C::firstKeyboard() const

 ScanI2C::FoundDevice ScanI2C::firstAccelerometer() const
 {
-    ScanI2C::DeviceType types[] = {MPU6050,  LIS3DH,   BMA423,   LSM6DS3, LSM6DSOX, BMX160,
-                                   STK8BAXX, ICM20948, QMA6100P, BMM150,  BMI270};
-    return firstOfOrNONE(11, types);
+    ScanI2C::DeviceType types[] = {MPU6050, LIS3DH, BMA423, LSM6DS3, BMX160, STK8BAXX, ICM20948, QMA6100P, BMM150, BMI270};
+    return firstOfOrNONE(10, types);
 }

 ScanI2C::FoundDevice ScanI2C::firstAQI() const
@@ -31,9 +31,6 @@ class ScanI2C
        INA3221,
        MAX17048,
        MCP9808,
-        SHT31,
-        SHT4X,
-        SHTC3,
        LPS22HB,
        QMC6310U,
        QMC6310N,
@@ -47,7 +44,6 @@ class ScanI2C
        BMA423,
        BQ24295,
        LSM6DS3,
-        LSM6DSOX,
        TCA9535,
        TCA9555,
        VEML7700,
@@ -95,7 +91,8 @@ class ScanI2C
        SFA30,
        CW2015,
        SCD30,
-        ADS1115
+        ADS1115,
+        SHTXX
    } DeviceType;

    // typedef uint8_t DeviceAddress;
@@ -136,7 +136,9 @@ bool ScanI2CTwoWire::i2cCommandResponseLength(ScanI2C::DeviceAddress addr, uint1
    return match;
 }

-/// for SEN5X detection
+#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_AIR_QUALITY_SENSOR
+// FIXME Move to a separate file for detection of sensors that require more complex interactions?
+// For SEN5X detection
 // Note, this code needs to be called before setting the I2C bus speed
 // for the screen at high speed. The speed needs to be at 100kHz, otherwise
 // detection will not work
@@ -174,6 +176,46 @@ String readSEN5xProductName(TwoWire *i2cBus, uint8_t address)

    return String(productName);
 }
+#endif
+
+#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
+bool detectSHT21SerialNumber(TwoWire *i2cBus, uint8_t address)
+{
+
+    i2cBus->beginTransmission(address);
+    i2cBus->write(0xFA);
+    i2cBus->write(0x0F);
+
+    if (i2cBus->endTransmission() != 0)
+        return false;
+
+    if (i2cBus->requestFrom(address, (uint8_t)8) != 8)
+        return false;
+
+    // Just flush the data
+    while (i2cBus->available() < 8) {
+        i2cBus->read();
+    }
+
+    i2cBus->beginTransmission(address);
+    i2cBus->write(0xFC);
+    i2cBus->write(0xC9);
+
+    if (i2cBus->endTransmission() != 0)
+        return false;
+
+    if (i2cBus->requestFrom(address, (uint8_t)6) != 6)
+        return false;
+
+    // Just flush the data
+    while (i2cBus->available() < 6) {
+        i2cBus->read();
+    }
+
+    // Assume we detect the SHT21 if something came back from the request
+    return true;
+}
+#endif

 #define SCAN_SIMPLE_CASE(ADDR, T, ...)                                                                                           \
    case ADDR:                                                                                                                   \
@@ -371,7 +413,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                break;
 #endif
 #if !defined(M5STACK_UNITC6L)
-            case INA_ADDR:
+            case INA_ADDR: // Same as SHT2X
            case INA_ADDR_ALTERNATE:
            case INA_ADDR_WAVESHARE_UPS:
                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xFE), 2);
@@ -387,7 +429,12 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                        logFoundDevice("INA260", (uint8_t)addr.address);
                        type = INA260;
                    }
-                } else { // Assume INA219 if INA260 ID is not found
+#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
+                } else if (detectSHT21SerialNumber(i2cBus, (uint8_t)addr.address)) {
+                    logFoundDevice("SHTXX (SHT2X)", (uint8_t)addr.address);
+                    type = SHTXX;
+#endif
+                } else { // Assume INA219 if none of the above ones are found
                    logFoundDevice("INA219", (uint8_t)addr.address);
                    type = INA219;
                }
@@ -448,22 +495,19 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                    }
                    break;
                }
-            case SHT31_4x_ADDR:     // same as OPT3001_ADDR_ALT
-            case SHT31_4x_ADDR_ALT: // same as OPT3001_ADDR
+            case SHTXX_ADDR:     // same as OPT3001_ADDR_ALT
+            case SHTXX_ADDR_ALT: // same as OPT3001_ADDR
                if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x7E), 2) == 0x5449) {
                    type = OPT3001;
                    logFoundDevice("OPT3001", (uint8_t)addr.address);
-                } else if (i2cCommandResponseLength(addr, 0x89, 6)) { // SHT4x serial number (6 bytes inc. CRC)
-                    type = SHT4X;
-                    logFoundDevice("SHT4X", (uint8_t)addr.address);
-                } else {
-                    type = SHT31;
-                    logFoundDevice("SHT31", (uint8_t)addr.address);
+                } else { // SHTXX
+                    type = SHTXX;
+                    logFoundDevice("SHTXX", (uint8_t)addr.address);
                }

                break;

-                SCAN_SIMPLE_CASE(SHTC3_ADDR, SHTC3, "SHTC3", (uint8_t)addr.address)
+                SCAN_SIMPLE_CASE(SHTC3_ADDR, SHTXX, "SHTXX", (uint8_t)addr.address)
            case RCWL9620_ADDR:
                // get MAX30102 PARTID
                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xFF), 1);
@@ -511,9 +555,6 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                if (registerValue == 0x6A) {
                    type = LSM6DS3;
                    logFoundDevice("LSM6DS3", (uint8_t)addr.address);
-                } else if (registerValue == 0x6C) {
-                    type = LSM6DSOX;
-                    logFoundDevice("LSM6DSOX", (uint8_t)addr.address);
                } else {
                    type = QMI8658;
                    logFoundDevice("QMI8658", (uint8_t)addr.address);
@@ -551,19 +592,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)

                break;

-            case LSM6DS3_ADDR:
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0F), 1);
-                if (registerValue == 0x6A) {
-                    type = LSM6DS3;
-                    logFoundDevice("LSM6DS3", (uint8_t)addr.address);
-                } else if (registerValue == 0x6C) {
-                    type = LSM6DSOX;
-                    logFoundDevice("LSM6DSOX", (uint8_t)addr.address);
-                } else {
-                    type = QMI8658;
-                    logFoundDevice("QMI8658", (uint8_t)addr.address);
-                }
-                break;
+                SCAN_SIMPLE_CASE(LSM6DS3_ADDR, LSM6DS3, "LSM6DS3", (uint8_t)addr.address);
                SCAN_SIMPLE_CASE(VEML7700_ADDR, VEML7700, "VEML7700", (uint8_t)addr.address);
            case TCA9555_ADDR:
                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x01), 1);
@@ -690,6 +719,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                    logFoundDevice("BMX160", (uint8_t)addr.address);
                    break;
                } else {
+#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_AIR_QUALITY_SENSOR
                    String prod = "";
                    prod = readSEN5xProductName(i2cBus, addr.address);
                    if (prod.startsWith("SEN55")) {
@@ -705,6 +735,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                        logFoundDevice("Sensirion SEN50", addr.address);
                        break;
                    }
+#endif
                    if (addr.address == BMX160_ADDR) {
                        type = BMX160;
                        logFoundDevice("BMX160", (uint8_t)addr.address);
--- a/Show More
+++ b/Show More