Audit and fuzzing of the RF-packet decode -> dispatch -> display/phone paths for
the "crash a node or phone with a crafted packet" surface, beyond the XEdDSA
authenticity work.
Crash fixes (reproduced under AddressSanitizer / UBSan):
- GeoCoord::latLongToUTM/latLongToMGRS read fixed letter tables out of bounds on
extreme latitude_i/longitude_i from a received Position, and narrowed
out-of-range easting/northing doubles to unsigned (float-cast-overflow UB).
Clamp the UTM zone, the easting/northing narrowing, and the band/col/row
indices. Regression: test_geocoord_extreme_coords_no_oob.
- EnvironmentTelemetry/AirQualityTelemetry render attacker floats via
String(float), which on nRF52/RP2040/STM32/portduino formats into a fixed
char[33] (dtostrf) and overflows near FLT_MAX. Clamp the rendered metrics via
UnitConversions::displaySafeFloat (finite + magnitude <= 1e9), unit-tested in
test_type_conversions.
Defense-in-depth + robustness:
- TraceRouteModule::printRoute: fix an snr_back[-1] OOB read (wrong count in the
guard) and stop formatting the INT8_MIN "unknown SNR" sentinel as a dB value.
- WaypointModule/NodeDB: sanitize untrusted strings before the OLED renderer and
the phone-facing ClientNotification (belt-and-suspenders vs PB_VALIDATE_UTF8).
- MeshService::sendToPhone: withhold NODEINFO/WAYPOINT packets whose nested string
won't cleanly decode, protecting strict phone protobuf decoders without
affecting mesh relay.
Tests: new test_fuzz_decode (protobuf decode + UTF-8 sanitizer fuzz) and
test_fuzz_packets (perhapsDecode / module-handler / traceroute / phone-gate fuzz),
all under AddressSanitizer; native-suite-count 25 -> 27. Full suite 515/515 green.
The Python MCP server + hardware test harness that lived under mcp-server/
now has its own home at https://github.com/meshtastic/meshtastic-mcp
(published, versioned independently). Remove the in-tree copy and wire the
firmware repo to the standalone server externally.
- Delete mcp-server/ (96 files) and the 8 harness-coupled AI workflow files
under .claude/commands/ and .github/prompts/ that drove ./mcp-server/
run-tests.sh — those workflows now ship with meshtastic-mcp as skills.
- .mcp.json: register the server via
`uvx --from git+https://github.com/meshtastic/meshtastic-mcp meshtastic-mcp`
instead of a local ./mcp-server/.venv, keeping MESHTASTIC_FIRMWARE_ROOT="."
so the MCP tools still work from this checkout with no local build.
- Repoint the remaining references (AGENTS.md, CLAUDE.md,
.github/copilot-instructions.md, bin/regen-*.sh, docs, Screen.h,
userPrefs.jsonc, test/fixtures/nodedb/README.md, .trunk/configs/.bandit)
at the standalone repo. The MCP tool surface is unchanged — only the
pytest harness moves out; run it from a meshtastic-mcp checkout with
MESHTASTIC_FIRMWARE_ROOT pointed here.
No build/CI/platformio coupling existed, so nothing in the firmware build
changes.
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
* Add define for screen I2C frequency
* Add functions to get I2C screen frequency and port
* Make reclock function aware of screen-set I2C speeds
* Refurbish ReClockI2C API
* Make ReClockI2C API class
* Use new API in AirQualityTelemetry module
* Minor changes on some logs
* Update esp8266-oled library
* Fix esp8266 library
* Minor logging changes
* Improve setClock and restoreClock cases
* Make getter functions const, fix capitalisaiton of new functions
* Minor typo, remove pragma once
* Low prio debug fixes
* Mark getter functions as const (properly)
* Fix LOG based on coderabbit feedback
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Audit of the XEdDSA packet-signing implementation (#10478) surfaced several
issues in when unsigned packets are accepted on receive or emitted on send.
This fixes them and adds regression coverage.
- Unicast NodeInfo exchange no longer breaks against signer nodes: the
NodeInfoModule downgrade drop is gated to broadcasts, since senders never
sign unicast (want_response replies, directed exchanges).
- Replace the payload-size sign heuristic with an exact encoded-size gate
(signedDataFits) and mirror it on the receive side, removing a dead band
where 167-168 B broadcasts were signed then failed TOO_LARGE.
- Extract the receive policy into checkXeddsaReceivePolicy() and apply it to
plaintext-MQTT decoded downlink, which previously skipped signature
verification and downgrade protection entirely.
- Reject signatures whose length is neither 0 nor 64 as malformed, so a
crafted partial signature can't inflate the size estimate and dodge the
unsigned-downgrade drop.
- Hold cryptLock on the MQTT verify path (shared Ed25519 key cache).
- Clear any client-preset signature on packets we originate, on all builds.
- Randomized (hedged) signing per the Signal XEdDSA spec: bump the
meshtastic/Crypto pin to the build where XEdDSA::sign mixes 32 bytes of
caller randomness into the nonce as Z (meshtastic/Crypto#3), and seed those
bytes in xeddsa_sign from HardwareRNG (checked, with a seeded-CSPRNG
fallback). test_crypto pins that repeated signs differ and both verify.
Adds test coverage: test_packet_signing groups A-E (receive matrix, send
policy, NodeInfo backstop, encoding invariants, decoded-ingress policy),
test_mqtt end-to-end downlink cases, and a test_crypto randomization check.
TAP V2 has a TFT screen and belongs to the same device category as
T-Deck / T-Watch S3 / HELTEC_V4_TFT -- Bluetooth should default to OFF
to avoid unwanted BLE connections and reduce power consumption. Users
can re-enable BT via the TFT settings menu when needed.
* Seeed Tracker X1 Support
* silence CPPCheck
* fix macro order regression and adapt stm32hal for new radiolib
* STM32 is a radiolib upstream fix ( https://github.com/jgromes/RadioLib/issues/1825 )
* fix STM32 regression
* Seeed Tracker X1 Support
* silence CPPCheck
* fix macro order regression and adapt stm32hal for new radiolib
* STM32 is a radiolib upstream fix ( https://github.com/jgromes/RadioLib/issues/1825 )
* fix STM32 regression
* address copilot OCD
* Split behavior only when the two LEDs are on distinct pins.
* bring naming in line with the other seeed devices
* update env name to fit convention too
* guarantee evaluation order
* Guard sensor readings against null values, make sensor use less power
* Fix SX126x daemon abort when tx power exceeds chip limit
reconfigure() asserted on setOutputPower() failure. `power` is derived from
operator-settable config (tx_power, SX126X_MAX_POWER); a value above the SX126x
RadioLib limit (+22 dBm) returns RADIOLIB_ERR_INVALID_OUTPUT_POWER. The assert
aborts meshtasticd mid-reconfigure -- before reloadConfig() persists the change --
so the offending config silently reverts and the daemon crash-loops. Record a
critical error and continue instead, matching the adjacent setFrequency() handling.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* Address Copilot review: per-chip power limit, log requested power
- Comment no longer states a universal "+22 dBm for SX126x"; notes the
limit is the driver's max (e.g. +22 on SX1262/SX1268, lower on SX1261).
- Log the rejected `power` value and that the previous Tx power is retained,
so the invalid setting and the resulting config/radio drift are visible.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* Address CodeRabbit nit: trim inline comment to repo guideline
Collapse the setOutputPower failure rationale from six lines to two,
per the repo's "one or two lines at most" comment guideline. The full
incident history lives in the PR and issue #10710.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* Convert pre-existing em-dashes to ASCII (trunk ascii-dash)
Two em-dashes in this file (from bbcc35e) fail the repo's ascii-dash
formatter once the file is in a PR's modified set. `trunk fmt` rewrites
them to ASCII hyphens; applied here so the Trunk Check passes. No
functional change.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* add watchdog to rp2xx0
* feat(eth-api): phase 0 skeleton — HTTP API server on TCP/80 (503 only)
First step of porting mesh/http/ to RP2350 + W5500 (today ESP32-only).
Phase 0 stands up the listener over the existing arduino-libraries/Ethernet
stack (no Mongoose — its built-in TCP/IP would conflict with EthernetServer
and break OTA/MQTT/NTP). Skeleton parses request line, logs it, replies 503.
Real handlers (/api/v1/{info,fromradio,toradio}) come in later phases.
- New mesh/eth/ethApiServer.{h,cpp} gated by HAS_ETHERNET_API
- Wired into ethClient init+loop in parallel with existing ethHttpOTA (port 4244)
- Enabled in both wiznet_5500_evb_pico2_e22p and pico2_w5500_e22 variants
- Build impact on wiznet: +~9 KB flash (63.0% used), <1 KB RAM
* feat(eth-api): phase 1 — implement /api/v1/{fromradio,toradio} with PhoneAPI
Replace phase 0 skeleton with the real handlers that bridge the HTTP transport
to PhoneAPI, mirroring mesh/http/ContentHandler (ESP32) semantics.
- EthHttpAPI : public PhoneAPI (api_type=TYPE_HTTP, checkIsConnected=true),
outside the MESHTASTIC_EXCLUDE_WEBSERVER gate so it builds on RP2350.
- Minimal HTTP parser: method/path/query/Content-Length, no allocations beyond
Arduino String, capped at 32 header lines x 256 bytes (anti-DoS).
- OPTIONS preflight -> 204 with CORS + X-Protobuf-Schema.
- GET /api/v1/fromradio[?all=true]: stream-write up to 64 protobufs from
webAPI.getFromRadio(), Connection: close framing (HTTP/1.0 style).
- PUT /api/v1/toradio: read Content-Length bytes (<=512), call
webAPI.handleToRadio(), echo body back.
- 404 default for unknown paths, 405 for wrong method, 400 for bad body.
Validated e2e against wiznet @ 192.168.1.143:
- OPTIONS /api/v1/fromradio -> 204 + correct CORS headers
- PUT ToRadio{want_config_id=1} (2 bytes) -> 200 + echo
- GET /api/v1/fromradio?all=true -> 200 + 3476 bytes (config+channels+nodeinfo)
- GET /api/v1/nonexistent -> 404 unknown endpoint
- OTA HTTP on port 4244 untouched and still responsive
Build impact on wiznet_5500_evb_pico2_e22p: +2 KB flash (63.1%), +1.8 KB RAM
(17.6%) vs phase 0.
* fix(eth-api): move accept loop to dedicated OSThread (20ms tick)
The API server was being polled from the Ethernet client Periodic which runs
every 5s. Measured impact before this fix on wiznet @ 192.168.1.143:
req 1: ttfb=6.458s total=6.509s (matches the 5s tick + handler overhead)
req 2: connection refused (W5500 sockets exhausted)
req 3: connection refused
After: same hardware, same network, back-to-back requests:
req 2: ttfb=0.287s
req 3: ttfb=0.015s
req 4: ttfb=0.022s
req 5: ttfb=0.020s
The web client (meshtastic/web served from localhost) was visibly stalling
mid-handshake — it had pulled 109 nodes + 19 messages but channels and device
info never arrived. With the periodic-only polling, every request takes 5s
and the W5500's 4 hardware sockets fill up under the burst.
EthApiServerThread mirrors the WebServerThread pattern from ESP32
mesh/http/WebServer.cpp: adaptive interval — 20ms when there's recent
traffic, 100ms after 5s of idle, 500ms after 30s. Auto-registers with the
OSThread scheduler on construction.
ethHttpOTA still ticks from the periodic; left unchanged because OTA is one
large transfer that tolerates the latency, and minimizing scope here to one
behaviour change at a time.
* refactor(eth-api): extract handlers to shared module via IStreamReadWrite
Phase 2.0 of the TLS port — separate transport from request handling so
the upcoming HTTPS server can reuse the exact same parser + routing logic.
- New ethApiHandlers.{h,cpp}: Request, parser, CORS helpers, fromradio/toradio
handlers, EthHttpAPI : PhoneAPI subclass. All driven by a single
IStreamReadWrite interface that inherits Print (so client.print(...) keeps
working transparently).
- ethApiServer.cpp slimmed to ~90 LOC: now just the EthernetServer(80) +
OSThread + an EthernetClientStream adapter that forwards reads/writes to
the underlying EthernetClient. No behaviour change.
Validated on wiznet @ 192.168.1.143: 5 curl requests TTFB 18-110ms (same
as pre-refactor), protobuf round-trip PUT 200 + GET ?all=true 3499 bytes.
Flash impact: +200 bytes (63.2%); RAM unchanged (17.6%).
* feat(eth-tls): ECDSA P-256 self-signed cert generation for HTTPS API
mbedTLS-based cert generation module that produces a SAN=IP self-signed
ECDSA P-256 server certificate, persisted under LittleFS so subsequent
boots reuse the same key. Generation runs once on a dedicated OSThread
so the ECDSA keygen path (~430 ms) never blocks the Periodic stack or
the Ethernet reconnect loop.
- mbedTLS 3.6.2 sources compiled in via scripts/add_mbedtls_sources.py
(BuildSources of pico-sdk/lib/mbedtls/library/*.c, all 108 files).
MBEDTLS_USER_CONFIG_FILE injected as CPPDEFINES tuple in the script —
build_flags shell escape mangles the embedded quotes on Windows.
- src/mbedtls_user_config.h undefs MBEDTLS_HAVE_TIME, HAVE_TIME_DATE,
TIMING_C, NET_C, FS_IO, PSA_ITS_FILE_C, PSA_CRYPTO_STORAGE_C, and
defines MBEDTLS_NO_PLATFORM_ENTROPY (entropy_poll.c uses a raw
platform check, not gated by a flag).
- src/mesh/eth/ethCert.{h,cpp}: ECDSA P-256 keypair + cert with
SAN(IP=current) using pico-sdk get_rand_64() directly as f_rng,
bypassing mbedtls_entropy. DER buffers heap-allocated to keep the
OSThread stack within budget. Cert + key + ip persisted under
/prefs/eth_*.der so subsequent boots reuse the same identity.
- Gated by HAS_ETHERNET_TLS_API. Standalone phase: generation only;
HTTPS server (TCP/443) wired up in the follow-up commit.
* feat(eth-tls-api): phase 2.2 — HTTPS server on TCP/443 reusing handlers
Brings up an mbedTLS server on port 443 that defers to the ECDSA P-256
self-signed cert produced by [[ethCert]]. Reuses the HTTP request /
response handlers from [[ethApiHandlers]] via the IStreamReadWrite
interface — there is exactly one code path for routing / CORS / PhoneAPI
integration regardless of whether the transport is plain TCP or TLS.
EthTlsApiServerThread (OSThread):
- Phase A: poll isEthCertReady() every 500 ms while the cert worker
runs. Once true, parse cert chain + key, build ssl_config (TLS server,
stream transport, default preset, VERIFY_NONE since we are the cert
issuer), install own cert, run ssl_setup, bind tlsServer on 443.
- Phase B: standard adaptive accept loop (20 / 100 / 500 ms tick),
identical to the plain-HTTP server.
Per-connection flow:
1. session_reset on the static ssl context (1 in-flight session — multi-
session pool is Phase 3 if needed)
2. set_bio routes mbedtls I/O to two C callbacks (netSend / netRecv)
that bridge to the live EthernetClient via the void* ctx
3. handshake loop (sync, blocking, with 10 s recv timeout) — mbedTLS
errors are logged with mbedtls_strerror
4. wrap (ssl, client) in MbedTlsStream → handleApiClient(stream)
5. close_notify + client.stop
Stack budget continues the Phase 2.1-bis discipline: every large buffer
(ssl context, cert chain, pk_key, ssl_config) lives in BSS as a static
global. The OSThread stack only holds the per-connection EthernetClient
adapter and small mbedtls return codes.
Validated on wiznet 192.168.1.143:
- cert load-from-FS path: 13 ms (regen skipped on second boot)
- cert gen path: 290 ms (first boot only)
- ssl_setup chain: parse cert, parse key, ssl_config_defaults,
conf_own_cert, ssl_setup all return 0
- end-to-end: curl -k https://192.168.1.143/api/v1/fromradio → 200 OK
with application/x-protobuf, CORS, X-Protobuf-Schema headers, server
initiates close_notify cleanly
Footprint vs 2.0:
- flash 70.5% → 87.3% (+220 KB for mbedtls_ssl + x509 server-side code)
- RAM static 17.6% → 19.8% (+11 KB BSS for ssl_context + cert chain)
- heap at runtime adds ~32 KB per active session (mbedtls in/out
record buffers, default MBEDTLS_SSL_*_CONTENT_LEN=16384)
Next: validate from Firefox direct (https://192.168.1.143 → warning
accept → JSON visible), then from client.meshtastic.org hosted to
confirm the mixed-content block is gone.
* fix(eth-tls): add KeyUsage + EKU serverAuth and cap TLS 1.2 for browser compat
Two browser-compat fixes that surfaced in Firefox validation:
1. Cert v1 only had Basic Constraints + SAN. NSS / Firefox refuse to
treat a cert as a TLS server cert without an Extended Key Usage
extension naming id-kp-serverAuth since 2023 — the error surfaces as
a non-overridable 'Secure Connection Failed' with no 'Accept the
Risk' path. Add KeyUsage(digitalSignature + keyEncipherment, critical)
and ExtendedKeyUsage(serverAuth, critical). Bump cert/key/ip file
paths to '_v2' so live boards regenerate on next start instead of
loading a v1 cert that the browser silently refuses.
2. pico-sdk mbedtls defines MBEDTLS_SSL_PROTO_TLS1_3 in its default
config, but the server-side 1.3 plumbing in this vendored build is
incomplete: Firefox and openssl-3.5's s_client default to 1.3 and
the handshake dies 4 ms in with MBEDTLS_ERR_ERROR_GENERIC_ERROR
(-0x0001). curl/SChannel happened to default to 1.2 so it masked the
issue earlier. Cap min/max_tls_version to TLS 1.2 — clients downgrade
transparently and we keep the ECDHE-ECDSA + AES-GCM / CHACHA20-POLY1305
suites that already work end-to-end.
Validated on wiznet 192.168.1.143:
- cert v2 dumps with the 4 extensions visible (openssl x509 -text):
BasicConstraints CA:FALSE, KeyUsage(critical) digitalSignature +
keyEncipherment, ExtendedKeyUsage(critical) serverAuth, SAN IP.
- openssl s_client (no version flag): downgrades to TLS 1.2, handshake
completes, verify_return=18 (self-signed, expected).
- Firefox: warning self-signed -> Advanced -> Accept Risk -> handshake
OK in 632 ms with CHACHA20-POLY1305, request reaches handleApiClient
and returns the protobuf body.
* perf(eth-api): HTTP/1.1 keep-alive — one handshake per session, not per request
Before this change /fromradio used 'Connection: close' framing (HTTP/1.0
style with no Content-Length), forcing each poll to redo the full TLS
handshake. client.meshtastic.org needs ~80 sequential /fromradio polls
during initial sync (one per packet from the config-replay state
machine: MyInfo, channels, every Config_*, every ModuleConfig_*, every
NodeInfo), so the user-visible load time was ~50 s of pure handshake
overhead (80 requests * ~625 ms ECDSA P-256 each).
Three coordinated changes:
1. handleApiClient() now loops on the same connection until the peer
closes or parseRequest hits its 3 s idle timeout. requestsServed
counter keeps the 'bad/timeout request' debug log from firing on
the natural idle close after a keep-alive sequence.
2. handleFromRadio() buffers all packets into a std::vector before
writing, so it can emit a real Content-Length and 'Connection:
keep-alive'. Buffer is dynamic — common 1-packet response only
allocates ~256 B; ?all=true keeps the 64-packet cap which tops out
around 16 KB. handleToRadio + sendPreflight switched to keep-alive
too (they already had real Content-Length). sendError keeps close —
errors are terminal.
3. ethTlsApiServer netRecv RECV_TIMEOUT_MS dropped from 10 s to 3 s so
mbedtls_ssl_read can't outlast the handler's idle deadline (a quiet
browser leaving the socket open would otherwise wedge the OSThread
for 10 s past the natural close).
Measured on wiznet 192.168.1.143 against client.meshtastic.org:
- one TLS handshake (641 ms, CHACHA20-POLY1305)
- ~80 requests pipelined over the same session
- full config + 40 NodeInfos in ~6-8 s (vs ~50 s before)
- per-request latency post-handshake: ~10-25 ms
- curl -kv with two URLs: 'Reusing existing https: connection',
server returns 'Connection: keep-alive' explicitly.
* fix(eth-tls): watchdog + Chrome compat — handshake stability across browsers
Phase 3 keep-alive shipped a working Firefox flow but client.meshtastic.org
loops + Chrome 'Test Connection' both rebooted the board. Four distinct
issues; collectively they kept the OSThread inside serveClient() too long
or spin-looping without yielding, and pico-sdk mbedtls' TLS 1.3 code path
choked on Chrome's modern ClientHello.
1. Watchdog reset during keep-alive idle. Once a client drained the
replay queue and entered 3 s poll mode, the OSThread sat inside
netRecv()'s busy-wait waiting for the next request. Two consecutive
3 s waits plus prior handler time crossed the 8 s RP2350 hardware
watchdog. Pet the watchdog inside netRecv()'s poll loop (every 2 ms)
so a quiet client can never starve the watchdog. Same fix in the
ethApiHandlers per-request yield path.
2. Cap session at 64 requests + yield() between. Defense-in-depth: a
pathological client can't monopolize serveClient indefinitely; after
the cap it just re-handshakes (~625 ms), still vastly cheaper than
the per-request handshake we had before keep-alive.
3. TLS 1.3 code compiled out of mbedtls entirely
(#undef MBEDTLS_SSL_PROTO_TLS1_3 in mbedtls_user_config). Capping
max_tls_version=TLS1_2 at runtime is enough for Firefox / openssl
(they downgrade cleanly), but Chrome's ClientHello carries TLS 1.3
extensions — post-quantum key shares, Encrypted ClientHello,
etc. — that the vendored mbedtls 1.3 parser crashes on before the
downgrade decision happens. Removing the 1.3 sources sidesteps the
parser; ServerHello just announces TLS 1.2 and Chrome accepts.
4. netSend infinite WANT_WRITE spin. When W5500's TX buffer momentarily
filled mid-handshake (Chrome draining slower than Firefox during
ServerKeyExchange), EthernetClient::write() returned 0, our netSend
returned MBEDTLS_ERR_SSL_WANT_WRITE without delay, mbedtls retried
immediately, repeat at ~180k iter/sec until ... well, until the
board's other threads got nothing done. Log signature: ret=-0x6880
tight-looping in the handshake iter trace. Rewrite netSend to block
with delay(2) + watchdog_update() and a 3 s timeout — same shape as
netRecv. Return MBEDTLS_ERR_SSL_PEER_CLOSE_NOTIFY on disconnect
(was incorrectly returning WANT_WRITE).
Also added granular per-iter handshake logging gated on first 20 iters
+ every 50th after that, so any future regression localizes itself in
COM9 without RTT JLink.
Validated on wiznet 192.168.1.143:
- Firefox: client.meshtastic.org full sync + idle poll stable (no
reset during the previously-crashing 'replay drain complete' phase)
- Chrome: 'Test Connection' accepts the cert prompt and connects
- Edge: same as Chrome
- openssl s_client default + tls1_2 forced: both negotiate TLS 1.2
with ECDHE-ECDSA + AES-GCM / CHACHA20-POLY1305, verify=18 (self-
signed, expected)
* chore(eth-tls): drop verbose debug logs from cert + TLS init paths
The cert pipeline + TLS context init had step-by-step LOG_INFOs and
ubiquitous Serial.flush() that were essential while diagnosing the
Phase 2.1-bis stack overflow, the Chrome handshake crash, and the
keep-alive watchdog reset. Once those bugs were fixed the logs just
clutter COM9 on every boot.
Kept on hand:
- cert: 'loaded from FS', 'generating ...', 'generated N B in T ms',
'persisted to LittleFS', plus all LOG_ERROR / LOG_WARN paths
- tls: 'server listening on TCP port 443', 'client connected from',
'handshake OK in N ms ciphersuite=', 'handshake failed -0xXXXX (...)',
plus all init LOG_ERRORs
Dropped:
- cert: 'step 1/8 pk_setup' through 'step 8/8 copy key DER', 'thread
woke', 'pipeline OK' (now silent on success)
- tls: 'cert is ready, initializing', 'parsing cert chain', 'parsing
key', 'ssl_config_defaults', 'conf_own_cert', 'ssl_setup',
'server worker scheduled', and the per-iter handshake trace
- obsolete 'Optional mbedtls debug bridge' commented-out stub
- all Serial.flush() that were added defensively for the
debug-the-crash phase
Bin shrinks ~40 KB (logs + format strings). Validated on wiznet
192.168.1.143: HTTP 200 round-trip works post-flash, no regression.
* fix(eth): harden API/TLS build guards (review #10573)
- ethApiHandlers.{h,cpp}: gate on (HAS_ETHERNET_API || HAS_ETHERNET_TLS_API)
so the shared handleApiClient/IStreamReadWrite still compile for an
HTTPS-only variant (the TLS server depends on them).
- ethTlsApiServer.{cpp,h}, ethCert.{cpp,h}: require ARCH_RP2040 (they use Pico
SDK get_rand_64()/watchdog_update()); the ethClient.cpp TLS include + call
site are tightened to match, so enabling the flag on a non-RP2040 Ethernet
target is a clean no-op instead of a cryptic build break.
- clang-format (16) the touched eth files to satisfy Trunk Check.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* fix(eth): address review — listener/cert recovery + keep-alive framing
- Rebind HTTP/80 and HTTPS/443 after a W5500 chip reset. reconnectETH() now
tears the API/TLS servers down (deInitEthApiServer/deInitEthTlsApiServer) so
the restart path recreates them; the singleton guards previously left both
bound to dead sockets until reboot. The workers are kept (only the listener
is dropped) so nothing is deleted from another thread's runOnce.
- Stop the keep-alive loop after a handler error. /fromradio and /toradio
return whether the connection may stay open; a 400/405/408 response
(Connection: close) now ends the loop so unread body bytes can't be parsed
as the next request.
- Validate the cached cert/key before trusting it (parse both DERs), and clear
the IP commit-marker before rewriting the pair and write it last, so a reset
mid-persist regenerates instead of handing the TLS server a truncated or
mismatched pair (which would hard-disable HTTPS).
- Track a cert generation counter so the TLS server reloads and rebinds when a
DHCP lease change regenerates the cert for a new IP (the SAN must follow, or
browsers reject the new address). The cert worker is no longer one-shot.
- Silence the SCons F821/E402 lint on add_mbedtls_sources.py to match the other
extra_scripts.
Validated on a W5500 board: a forced chip reset rebinds 80 and 443 without an
MCU reboot; a truncated cached cert regenerates and HTTPS recovers; a simulated
lease change reissues the cert with the new IP in the SAN.
* fix(eth): clear cert readiness on regen failure + verify cached pair
Follow-up to the review:
- Reset ready_/certIp_ when ensureCertForIp() fails, so isReady() no longer
reports true with empty material — otherwise a later TLS reload fails
initTlsContext() and stays disabled instead of retrying on the next poll.
- certKeyParse() now also checks the cached cert and key form a matching pair
(mbedtls_pk_check_pair), rejecting an independently-parseable but mismatched
cert/key (e.g. if the IP commit-marker survived a failed clear).
Validated on a W5500 board: a valid cached pair still loads from FS, and a
regenerated cert reloads cleanly.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* Fix T1000-E QMA6100P I2C probing
* Refactored to make generic
* address copilot comments
* fix(i2c): address copilot comments on QMA6100P scanning and hardware init
- ScanI2CTwoWire: gate bounded QMA6100P probing to addresses 0x12/0x13 only
(Copilot comment: avoid blocking other I2C device detection on nRF52)
Falls back to normal Wire probing for all other addresses, allowing BMM150
and other devices at overlapping addresses to be properly detected.
- Nrf52Twim: suppress cppcheck redundantAssignment on ENABLE register write
(intentional disable→configure→enable pattern for hardware safety; explicit
disable ensures known state before configuration even if already disabled)
Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
* Nrf52Twim: gate on HAS_QMA6100P; suppress cppcheck redundantAssignment
The TWIM helper is only used by the QMA6100P probing path (T1000-E, the sole
board defining HAS_QMA6100P). It was gated only on ARCH_NRF52, so it compiled
as dead code on every other nRF52 board and was analyzed by the rak4631
cppcheck job -- which failed on a redundantAssignment false positive.
Gate the header and source on HAS_QMA6100P so the file is only built/analyzed
where it is actually used. Also keep an inline suppression on the ENABLE
re-assignment (a required volatile disable->reconfigure->enable sequence) for
the case where the T1000-E build is run through cppcheck locally.
Fixes the rak4631 cppcheck CI failure for PR #10713.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: nomdetom <nomdetom@protonmail.com>
Co-authored-by: Tom <116762865+NomDeTom@users.noreply.github.com>
Co-authored-by: Claude Haiku 4.5 <noreply@anthropic.com>
* Add gpsd support to portduino
* copilot fixes
* emit gps config in emit_yaml
* Fix formating to standard
* Address coderabitai issues
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* clarify channel number formatting and fix the fixed-width padded nodeIDs
* use the explicit 0x%08x for packets and nodeIDs throughout
* LLM instructions
Reconciles develop to master's latest renovate values for deps bumped on the
2.7 line but never back-merged, so the develop->master 2.8 promotion (#10777)
doesn't regress them. Done as a value reconcile, not a cherry-pick: several
master commits are superseded (5 device-ui bumps, 2 ststm32 bumps), and
develop's stale archive/refs/tags/ URL form actually blocked renovate from
bumping these (the regex expects archive/<version>.zip).
GitHub Actions:
- actions/checkout v6 -> v7 (35 refs)
- actions/cache v5 -> v6
- actions/github-script v8 -> v9 (3 refs)
- actions/stale v10.2.0 -> v10.3.0
Build / platform:
- alpine 3.23 -> 3.24 (alpine.Dockerfile)
- platformio/ststm32 19.5.0 -> 19.7.0
- platformio/nordicnrf52 10.11.0 -> 10.12.0
Libraries:
- Adafruit SSD1306 2.5.16 -> 2.5.17
- SparkFun MMC5983MA v1.1.4 -> v1.1.5
- Sensirion I2C SCD30 1.0.0 -> 1.1.1
- meshtastic esp8266-oled-ssd1306 6bfd1f1 -> 2e26010
Deliberately excluded:
- meshtastic/device-ui digest: coupled to firmware protobuf/API and develop has
diverged hard (NodeDB v25); left for a separate maintainer bump + visual check.
- libpax: develop uses the mverch67 fork (pinned by Arduino-3.x migration #9122),
master uses dbinfrago -- a fork divergence, not a version bump; not reconciled.
- platform-native digest: develop already at 61067ac (equal to master).
* fix se0fl-nodeID change
* address review: avoid redundant satellite erase + add braces in createNewIdentity
removeNodeByNum() already drops the satellite stores (and warm-tier copy) when it
removes the node, so only erase satellites directly in the rare case the lite entry
was already absent. Brace the removal block.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Document that src/mesh/generated is auto-generated and must not be edited
* Fix esp32s2 build by enabling native USB CDC, add S2 to check matrix (#10799)
* fix: stop unexpected NodeNum regeneration from PKI key loss
A node's NodeNum is derived from its PKI public key
(my_node_num == crc32(public_key)), so it changes only when the keypair is
regenerated -- which happens only when a keygen path runs while
config.security.private_key.size != 32. Two paths could trigger that without
the user intending a new identity:
1. Boot: loadFromDisk() collapsed every non-success loadProto() result for the
config file into installDefaultConfig() (preserveKey=false), which memset()s
config and wipes the private key. loadProto() distinguishes DECODE_FAILED
(file present but undecodable/undecryptable) from OTHER_FAILURE (absent), so
a transient/corrupt read silently minted a new identity. A new
configDecodeFailed flag now gates the boot keygen and the boot config-save
directly (not via region, so it survives the userprefs/region overrides that
run later in loadFromDisk): identity is frozen, the unreadable file is left
intact for a later clean boot to recover, and the node boots radio-silent
(region UNSET, TX off). A genuinely-absent config still gets defaults + keygen.
2. AdminModule security SET: config.security = c.payload_variant.security
wholesale-clobbered the keypair, then regenerated whenever the incoming
private_key.size != 32. A client editing an unrelated security field without
round-tripping the private key would re-mint identity. The existing keypair
is now preserved when the incoming config omits it; first provisioning and
key import are unchanged. Intentional reset goes through factory_reset.
Native PlatformIO unit suite (Docker): 499/499 test cases pass.
* test: cover security keypair preservation; clarify load-failure comment
Addresses PR review feedback:
- Add native unit tests (test_admin_radio) asserting handleSetConfig preserves the
existing identity keypair when a security SET omits the private key, and applies a
full supplied keypair (key import). Guards against reintroduced NodeNum/keypair
regeneration. AdminModuleTestShim (now a friend) defers saves so the lightweight
harness doesn't saveToDisk an uninitialized node database.
- Clarify the non-DECODE_FAILED config-load comment: OTHER_FAILURE / NO_FILESYSTEM
cover an absent or unopenable file, not just first boot.
* Disable gps thread on startup if lora region is unset
There is little reason to waste battery on the gps if the data cannot
yet be used.
* fix goobered merge
Refactor GPS enabling logic and remove duplicate code.
* trunk
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* Add ARCH_PORTDUINO_WASM build: meshtasticd in WebAssembly over WebUSB
Compile the full portduino firmware to WebAssembly (Emscripten) so a real node runs in a browser tab or headless Node, driving a LoRa radio over WebUSB through a CH341 — the desktop Ch341Hal path with its libusb backend swapped for a WebUSB one. The native/desktop portduino build is unchanged.
New build env under src/platform/portduino/wasm/ (excluded from the native build_src_filter): WebUSB libpinedio backend, config/FS/region/MAC/PhoneAPI glue, wasm setup/loop, JS WebUSB runtime, and build stubs. bin/build-portduino-wasm.sh runs a standalone cached emcc build to build/wasm/meshnode.{mjs,wasm}.
Six firmware sources gain #ifdef ARCH_PORTDUINO_WASM guards (single-threaded cooperative emscripten_sleep loop, continuous RX, US region default, std RNG, no-popen exec); none affect non-wasm builds.
* PortDuino WASM: CI build job, cross-platform libdeps, configurable adapter
bin/build-portduino-wasm.sh: auto-detect native-macos (macOS) vs native (Linux/CI) libdeps with a NATIVE_ENV override, and use the SAME env's Crypto with an XEdDSA-present guard. Drops the heltec-v3/Crypto borrow — the meshtastic/Crypto pin already ships XEdDSA; the native libdeps cache was just stale. No env pin change.
Add .github/workflows/build_portduino_wasm.yml: build the ARCH_PORTDUINO_WASM target in CI (ubuntu + emsdk, native libdeps) so it can't silently bit-rot; asserts build/wasm/meshnode.{mjs,wasm}.
src/platform/portduino/wasm: add wasm_set_lora_* setters so the JS host can configure any CH341 LoRa adapter (module, USB ids, DIO/TCXO, SPI speed, pins); wasm_config_apply falls back to the MeshToad defaults when unset.
* WASM: build as a first-class [env:wasm] via platform-wasm (retire emcc script)
Replace the standalone emcc build (bin/build-portduino-wasm.sh) with a normal
PlatformIO env, `pio run -e wasm`, using the new meshtastic/platform-wasm
platform (emcc/em++ + Asyncify, the WASM sibling of platform-native). The
portduino WebAssembly node is now built the same way as every other target.
- variants/native/portduino/platformio.ini: add [env:wasm] (platform pinned to
platform-wasm, board wasm). Translates the script's source set into a curated
build_src_filter, the ~30 EXCLUDE_* defines, and the lib set; defines
ARCH_PORTDUINO_WASM in-repo so correctness doesn't hinge on the platform's
board.json.
- extra_scripts/wasm_link_flags.py: the firmware-specific emcc *link* settings
(EXPORT_NAME, EXPORTED_RUNTIME_METHODS, EXPORTED_FUNCTIONS, ASYNCIFY_IMPORTS).
PlatformIO feeds build_flags to compile only, so these must ride LINKFLAGS;
without it the WebUSB Asyncify seam and the JS host's runtime methods are
dropped (the _wasm_* exports survive only via EMSCRIPTEN_KEEPALIVE).
- PortduinoGlue.{h,cpp}: guard the yaml-cpp dependency out of the WASM build
(#ifndef ARCH_PORTDUINO_WASM around the include, emit_yaml/loadConfig/
readGPIOFromYaml). The browser node configures via the wasm_set_lora_* setters
and dead-strips the YAML path; this drops the host yaml-cpp build dependency
entirely. Native is unchanged (guards are inert there).
- portduino_glue_wasm.cpp / portduino_main_wasm.cpp: repair EM_ASM JS that a
formatter had mangled (!== -> != =, regex split) in the prior landing; the
emcc link succeeds regardless, so CI now runs `node --check meshnode.mjs`.
- .github/workflows/build_portduino_wasm.yml: build via `pio run -e wasm`
(artifacts under .pio/build/wasm/), trigger on the shared inputs the env
inherits (root platformio.ini, bin/platformio-*.py).
- NodeDB.cpp: drop the dead ARCH_PORTDUINO_WASM region-default branch (region
now defaults the same as native).
- Crypto renovate pins: add the missing gitBranch so they track upstream.
Output: .pio/build/wasm/meshnode.{mjs,wasm} (ES module, factory createMeshNode).
Verified: pio run -e wasm (against the published platform archive), node --check,
module instantiates in Node with all exports; native-macos + Docker native unit
tests (450/450) still pass.
* Fix name on the Piggystick
* wasm: pin platform-wasm at the GPL-3.0-relicensed commit
platform-wasm's LICENSE was always GPLv3 (matching this firmware), but its
platform.json/README still declared Apache-2.0 (mis-copied from platform-native).
That's fixed upstream in b83fa5b; bump the [env:wasm] pin to it. Build output is
unchanged (license metadata only). Verified: pio run -e wasm against b83fa5b.
* wasm: make reboot() actually restart the node (was a no-op)
In wasm the reboot path is live (main.cpp -> Power::powerCommandsCheck ->
Power::reboot), but Power::reboot's ARCH_PORTDUINO arm tore down SPI/Wire/Serial
and then called the no-op ::reboot() stub — leaving the node running with a dead
radio until the tab was manually reloaded. Triggers include an admin/phone
reboot, factory reset, the "reconfigure failed" path, and the 60 s stuck-TX
hardware watchdog (RadioLibInterface).
- Power::reboot(): add an ARCH_PORTDUINO_WASM arm (before ARCH_PORTDUINO, since
the wasm build defines both) that skips the host teardown and just calls
::reboot(). notifyReboot already let modules persist.
- ::reboot() (glue): hand off to the JS host — browser reloads the tab (NodeDB
state survives via IDBFS, same identity returns); headless calls Module.onReboot
if provided, else logs. Loose !=/== so clang-format doesn't mangle the EM_ASM JS.
- README: document the reboot handoff + the Module.onReboot hook.
Verified: pio run -e wasm + node --check (EM_ASM intact); native-macos unaffected.
* wasm: rename env to native-wasm and run it in the main CI matrix
Rename [env:wasm] -> [env:native-wasm] for consistency with the portduino
native family (native, native-macos, native-tft). The build dir follows to
.pio/build/native-wasm/ (artifact is still meshnode.{mjs,wasm}); the PIOENV
guard in extra_scripts/wasm_link_flags.py, the README, and the companion wrapper
move with it. The board stays `wasm`.
Also wire the build into normal CI: build_portduino_wasm.yml becomes a reusable
workflow (workflow_call) invoked as the `build-wasm` job of main_matrix.yml, so
the WebAssembly node is built like every other platform instead of on a separate
path trigger.
* native-wasm: auto-locate the Emscripten SDK (pre-build script)
`pio run -e native-wasm` failed with "emcc not found" whenever it was invoked
from a shell that hadn't sourced emsdk_env.sh — a VS Code task, an IDE build
button, a bare terminal. Add a pre: extra script that probes the usual emsdk
locations ($EMSDK_ENV, $EMSDK, ~/emsdk, ./.emsdk, the sibling companion
checkout), sources emsdk_env.sh, and imports the resulting environment so the
platform builder and emcc see PATH/EMSDK/EM_CONFIG. No-op when emcc is already
reachable (CI), silent when no SDK is found (the platform emits its own error).
* wasm: address PR review feedback
- js/bridge.js: import CH341 from "./ch341.js" (sibling in this layout), not
"../src/ch341.js" which doesn't resolve here.
- js/ch341.js: a zero-length transferIn while MISO bytes are still outstanding
now throws instead of breaking out with a partially-filled buffer — silent SPI
corruption becomes a loud error, matching the comment above it.
- libpinedio_webusb.c: webusb_set_auto_cs honors the AUTO_CS option (? 1 : 0)
instead of the always-on ? 1 : 1. Runtime behavior is unchanged — Ch341Hal sets
AUTO_CS=0 right after pinedio_init (RadioLib drives the active-low NSS); the
option just isn't set yet at init, so this now correctly defaults off.
- SX126xInterface.cpp: the RX-start error log now names the method actually
called (startReceive vs startReceiveDutyCycleAuto) instead of hardcoding the
duty-cycle name in the WASM branch.
* native-wasm: drop the emsdk bootstrap shim (now in platform-wasm)
The Emscripten SDK auto-location moved into the platform-wasm builder, so the
firmware no longer needs its own pre: extra script. Remove
extra_scripts/wasm_emsdk_env.py and bump the platform pin to the build that
carries the bootstrap. The wasm_link_flags.py post script stays — those exported
fns / runtime methods / Asyncify import seam are firmware-app-specific.
* wasm: use the canonical companion name (meshtasticd-wasm-node)
The companion repo was renamed meshtastic-web-node -> meshtasticd-wasm-node; fix
the stale name in the wasm README and bump the platform pin to the build that
promotes the canonical name in its emsdk auto-location.
* wasm: re-entrancy guard for the API/region entry points + flaky-open retry
Two robustness fixes for the browser node:
- Re-entrancy guard. The node is single-threaded + Asyncify: while setup()/loop()
is suspended inside a WebUSB transfer, the JS event loop is free, so a stray
DOM/timer callback that re-enters a wasm_* entry point starts a second Asyncify
unwind ("async operation already in flight" abort) or clobbers shared PhoneAPI
state (observed as a "PhoneAPI::available unexpected state" flood). Add a
g_wasm_in_firmware flag set around setup()/loop() (portduino_main_wasm.cpp); the
wasm_set_region / wasm_api_to_radio / wasm_api_from_radio / wasm_api_available
entry points now reject a mid-tick call (return busy) instead of corrupting or
aborting. The host must still call them between ticks — this is the safety net
the design lacked, not a substitute for the JS queue.
- CH341 open retry (js/bridge.js). First-connect WebUSB is flaky — the interface
is briefly unclaimable right after the grant, or held by a prior session,
giving a transient "Could not open SPI: -1". Retry the open with a short
backoff, closing the device between attempts so claimInterface starts clean.
* wasm: exclude emscripten-only sources from cppcheck
The `check` board matrix runs `pio check` (cppcheck) over all of src/,
including src/platform/portduino/wasm/. cppcheck can't parse the EM_ASYNC_JS/
EM_JS macros (Syntax Error: AST broken at libpinedio_webusb.c:39,
internalAstError) and these sources are not part of any checked board build
([env:native-wasm] is board_level=extra, compiled by the build-wasm CI job).
Suppress the wasm dir in suppressions.txt, the same way generated/ and .pio/
are already excluded.
* wasm: coalesce FS.syncfs so two never run at once
IDBFS syncfs is async; the explicit wasm_fs_sync (5s timer + post-save +
beforeunload) could overlap a prior in-flight sync, warning "2 FS.syncfs
operations in flight at once". Serialize: if a sync is running, mark a pending
re-sync and let the in-flight one chain it on completion — at most one in flight,
trailing writes still flushed. (Companion drops IDBFS autoPersist so this is the
single persistence path.)
* wasm: silence false-positive SAST on the emscripten glue
- extra_scripts/wasm_link_flags.py: restore the trunk-ignore-all(ruff/F821,
flake8/F821) header every other SCons extra_script carries; Import/env are
SConscript-injected globals, so ruff/flake8 flag them as undefined.
- .semgrepignore: exclude src/platform/portduino/wasm/js/ (browser WebUSB glue,
not part of the firmware binary). The unsafe-formatstring rule false-positives
on its benign retry/diagnostic console logs.
* Update .github/workflows/build_portduino_wasm.yml
Co-authored-by: Austin <vidplace7@gmail.com>
---------
Co-authored-by: Austin <vidplace7@gmail.com>
* InkHUD: map tile background, zoom controls, and GPS live tracking
- Map background tiles are now rendered on the display when available, compressed with LZ4 to keep flash usage low
- If no map tiles are loaded, the map applets behave exactly as before
- Zoom in, zoom out, and reset zoom (back to auto-fit) are accessible from the menu, and only appear when the menu is opened from a map screen
- The map updates automatically whenever GPS gets a new position or your phone shares a location
- The Positions and Favorites map applets now also refresh when mesh position packets arrive for your own node
- The Favorites map now shows your position on the map even if you have no favorites yet
* README Update
* Update MapApplet.cpp
* Zoom fixed
* Zoom with no tiles fix
* CI fix
* Tips robot virtual node / relayer to different LoRa modes & channels
Note that this commit has details hardcoded for the Wellington (NZ)
mesh, and also requires the following patch to the protobufs:
-----
diff --git a/meshtastic/mesh.proto b/meshtastic/mesh.proto
index 03162d8..ec54c99 100644
--- a/meshtastic/mesh.proto
+++ b/meshtastic/mesh.proto
@@ -1393,6 +1393,21 @@ message MeshPacket {
* Set by the firmware internally, clients are not supposed to set this.
*/
uint32 tx_after = 20;
+
+ /*
+ * The modem preset to use fo rthis packet
+ */
+ uint32 modem_preset = 21;
+
+ /*
+ * The frequency slot to use for this packet
+ */
+ uint32 frequency_slot = 22;
+
+ /*
+ * Whether the packet has a nonstandard radio config
+ */
+ bool nonstandard_radio_config = 23;
}
/*
-----
* fix: repair mesh tips CI build
* feat: add MeshBeacon module (Phase 1 — proto + generated code + initial stub)
* feat(beacon): implement broadcaster + listener (phases 2-5)
* feat(beacon): wire RadioLibInterface hooks + admin validation (phases 6-7)
* fix(beacon): fix LocalModuleConfig flat access (no payload_variant), add localonly proto field
* feat(beacon): fix broadcaster inheritance, add preset/region validation + proto cache
- MeshBeaconBroadcastModule now inherits ProtobufModule<meshtastic_MeshBeacon>
(alongside private MeshBeaconModule + OSThread), giving it allocDataPacket()
and setStartDelay() without extra includes.
- Payload cache: rebuildCache() encodes the MeshBeacon protobuf once and stores
it in payloadCache[]/payloadCacheSize; sendBeacon() only calls rebuildCache()
when payloadCacheDirty==true. AdminModule calls invalidateCache() after saving
new config so the next broadcast picks up changes.
- Region/preset validation in handleSetModuleConfig (mesh_beacon_tag):
broadcast_on_preset is validated against the device's current region via
RadioInterface::validateConfigLora(); broadcast_offer_region is validated via
RadioInterface::validateConfigRegion(). Invalid values are zeroed with a
LOG_WARN before saving.
* feat(beacon): add unit tests for MeshBeaconModule and AdminModule configuration validation
* remove old meshtips
* more validation in NodeDB and AdminModule, and userprefs for baked in goodness
* copilot is my gravity
* mmmmm... beacon
* oops
* Enhance unit tests for MeshBeaconModule with detailed validation checks and output formatting
* new lines. Why not?
* finally
* legacy mode activate!
* Update protobufs (#17)
Co-authored-by: NomDeTom <116762865+NomDeTom@users.noreply.github.com>
* better logic, fixed a test
* updated for packet signing
fixed a test
added guards for licensed/ham mode
* channel numbers
* beacon: encrypt on the beacon channel PSK; fix split note
When broadcast_on_channel overrides the primary channel's name/PSK, the
beacon was encrypted with the PRIMARY PSK: perhapsEncode keys encryption
off the primary slot, but the radio-thread channel switch happens only
after encryption. sendBeaconPacket() now installs the beacon channel into
the primary slot for the synchronous duration of send() (cooperative
threading => no interleaving) so encryption/hash use the beacon channel,
then restores it. A shared beaconChannelSettings() helper builds the
channel for both the encrypt-time swap and the RF-time swap so the
key+hash cannot drift.
Also: correct the legacy-split comments (both packets go out on the same
beacon radio settings, not the normal config) and merge the two
consecutive `if (hasText)` blocks in the listener (cppcheck
duplicateCondition).
Tests: add channelPskOverride_swapsBeaconChannelAndRestores and
noChannelOverride_doesNotSwapPrimary; MockRouter snapshots the primary
channel at send() time.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* test/beacon: drain toPhoneQueue in tearDown to fix LSan leak abort
The listener delivers received text via MeshService::sendToPhone(), which
enqueues the packet into toPhoneQueue and takes ownership. Nothing dequeues
it in tests, so the three listener tests carrying message text stranded a
MeshPacket each — 1272 bytes / 3 allocations that LeakSanitizer flagged at
process exit, aborting the coverage run (surfaced by pio as [ERRORED] /
SIGHUP even though all 40 assertions passed).
Drain the phone queue in tearDown (getForPhone()/releaseToPool) so the
packets return to packetPool. Suite is now GREEN with no sanitizer abort.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* legacy hop override for zero-hoppers
* ever more beacons
* beacon: comment out broadcast_send_as_node pending further review
Functionality preserved in comments with full signing/has_bitfield notes
for when it is re-enabled. Proto tag 3 retained on the wire.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* test/beacon: fix fromIsCustomNodeWhenSet now that send-as-node is disabled
broadcast_send_as_node is commented out; from is always the local node.
Update the test assertion and doc comment to match current behaviour.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* Update protobufs (#21)
Co-authored-by: NomDeTom <116762865+NomDeTom@users.noreply.github.com>
* flags for beacons
* beacon: do more with less — slot-index targets + validation
Multi-target beacons embedded a full ChannelSettings in every BroadcastTarget,
blowing ModuleConfig past the 512-byte BLE FromRadio budget so the firmware would
not compile. Targets now reference an existing channel-table slot by channel_index
and the broadcaster resolves it via channels.getByIndex() at TX time. Net effect:
the same multi-target capability for a fraction of the bytes —
FromRadio 609 -> 510 B, MeshBeaconConfig 596 -> 324 B, AdminMessage 615 -> 511 B.
- proto: BroadcastTarget.channel (embedded) -> channel_index (uint32 ref); regen all
generated headers (size constants propagate to admin/localonly/deviceonly/mesh).
- broadcaster: resolve channel_index from the channel table; an out-of-range or blank
slot falls back to the default channel for the target preset rather than borrowing
the primary's name/PSK.
- AdminModule: validate broadcast_targets entries on write (region/preset sanitised
like the single-target fields; channel_index range-checked).
- userPrefs: TARGET_<n>_CHANNEL_{NAME,NUM,PSK} collapse to a single CHANNEL_INDEX.
- docs: two-step (set_channel -> set_module_config) multi-target setup, inline-vs-
reference distinction, and single-/multi-target are equal (not "legacy") options.
- tests: target validation + channel-index resolution incl. blank-slot fallback
(47/47 green on `./bin/run-tests.sh -e native -f test_mesh_beacon`).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NRAF5csgsMn6p1zEcFL8Qz
* throttling after reboot
* address copilot review
* simplify
* fix(beacon): use 0x%08x for node/packet IDs in logs; register test suite
The %#08lx log specifiers passed uint32_t (NodeNum/PacketId) to a %lx
length modifier — undefined behaviour on 64-bit (native test) targets and
non-standard width. Switch to the project-standard 0x%08x. Also bump
test/native-suite-count to 25 for the added test_mesh_beacon suite.
clod helped too
* copilot & clarity
clod helped too
* refactor(beacon): use auto for the sanitized config copy
clod helped too
* fix(beacon): guard empty-payload sends; gate has_mesh_beacon on build flag; document ISR_TX pre-switch
clod helped too
---------
Co-authored-by: Steve Gilberd <steve@erayd.net>
Co-authored-by: Darafei Praliaskouski <me@komzpa.net>
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* esp32: release BTDM heap when Bluetooth inactive
Release ESP-IDF BTDM memory after config load when Bluetooth is disabled or WiFi is enabled, recovering heap on ESP32 targets where BLE won’t be used for this boot.
* Address BT memory release review comments
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Make the PowerFSM DARK-to-LS timeout immediate when Bluetooth support is compiled out or config.bluetooth.enabled is false. The configured wait_bluetooth_secs default behavior is unchanged when Bluetooth is enabled.
Ben MeadorsandGitHub
AustinandGitHub
Jonathan BennettandGitHub
TomandGitHub
Ethac.chenandGitHub
Thomas GöttgensandGitHub
ManuelandGitHub
