13302 and 13300 had missing module config for slot 2, also the rf switch and voltage info was missing.
Without that the auto setting in the config.yaml will try to use the default lora-hat-rak-6421-pi-hat.yaml and things do not work correctly.
* fix: release Heltec v4 FEM sleep holds
* fix: increase FEM power settle delay
* Fix heltec_V4 documentation
Fixing the heltec_v4 documentation for enabling the PA after sleep.
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Add comment for the next guy about why 5ms was chosen.
---------
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* asdf
* Implement SphereOfInfluenceModule for traffic management and eviction tracking
* Implement Sphere of Influence module for dynamic hop limit adjustment and role-based floor
* Update SAMPLING_DENOMINATOR to improve mesh size estimation accuracy
* Add debug logging for scale factor estimation and per-hop node counts in SphereOfInfluenceModule
* Enable variable hop limits and role-based hop floors in Sphere of Influence module
* Respond to copilot review
* Disable variable hop limits and role-based hop floors in Sphere of Influence module
* Apply suggestions from code review
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Implement adaptive sampling for unique node ID tracking in Sphere of Influence module
* Add state persistence for Sphere of Influence module
* Enhance Sphere of Influence module with state management and adaptive sampling adjustments
* Refactor hop scaling functionality: remove SphereOfInfluenceModule and introduce HopScalingModule
- Deleted SphereOfInfluenceModule.h, consolidating its responsibilities into the new HopScalingModule.
- Added HopScalingModule.h and HopScalingModule.cpp to manage hop scaling logic, including eviction tracking and sampling-based mesh size estimation.
- Implemented methods for recording evictions and packet senders, estimating scale factors, and computing required hops based on node activity.
- Introduced state persistence for hop scaling parameters to maintain continuity across reboots.
- Enhanced thread safety and modularity by utilizing concurrency features.
* Guard out STM32. Sowwy.
* Refactor HopScalingModule: enhance sampling logic and improve state management
* Add unit tests for HopScalingModule: implement mock database and various test scenarios
* Refactor test output in HopScalingModule tests: replace printf with TEST_MESSAGE for better integration with Unity
* Refactor HopScalingModule logging: replace lastStatusMode with descriptive mode names for improved readability
* Refactor test_main.cpp: change NodeNum variable to static and improve comments for clarity
* Remove unnecessary delay in setup function for improved test performance
* Add missing include for MeshTypes in test_main.cpp
* Refactor HopScalingModule tests: enhance mesh topology scenarios and improve test clarity
* Update HopScalingModule tests: flesh out node scenarios and improve clarity for dense and sparse mesh cases
* Fix politeness factor calculations in HopScalingModule and update related test scenarios for clarity. Remove outdated design doc.
* Enhance HopScalingModule: add sampled estimate for scaling decisions and refactor initial run state management
* Add sample traffic injection for HopScaling tests to enhance sampledEst visibility
* Enhance HopScalingModule: adjust windowFraction calculation for early triggers and improve test output formatting
* Enhance HopScalingModule: add jitter functionality to sampling denominator and update tests for consistent behavior
* Enhance HopScalingModule: implement adaptive sampling denominator adjustment and add reset functionality for tests
* Enhance HopScalingTestShim: add test-only clock and window helpers, update injectSampleTraffic for adaptive sampling, and improve scenario summary output
* Enhance HopScalingModule: add detailed documentation for functions, improve clarity of jitter and sampling logic, and reset functionality in tests
* Enhance HopScalingModule: add evictionEstimate parameter to estimateScaleFactor and update related logging for improved mesh size estimation
* Enhance HopScalingModule: adjust effective rolls calculation for improved accuracy, add eviction estimate logic, responding to all copilot review points
* Implement CompactHistogram for parallel hop scaling sampling
- Added CompactHistogram class to track node hop distances with bitwise sampling.
- Integrated CompactHistogram into HopScalingModule for independent packet sampling.
- Updated NodeDB to feed both the hop scaling module and the new histogram sampler.
- Enhanced HopScalingModule with methods to sample packets for the histogram and retrieve hop distribution statistics.
- Implemented tests for CompactHistogram functionality, including sampling, window rolling, and adaptive denominator scaling.
- Updated existing tests to validate the integration of the new histogram sampling mechanism.
* Enhance CompactHistogram and HopScalingModule: add per-hop distribution functionality, improve time handling for unit tests, and refine test setup for deterministic behavior
* CompactHistogram: add mesh size estimation, improve entry replacement logic, and update logging for per-hop distribution
* Refactor HopScalingModule and CompactHistogram integration
- Removed the suggestedHopFromCompactHistogram function to streamline hop suggestion logic.
- Updated HopScalingModule to directly utilize CompactHistogram's internal methods for hop suggestions and sampling.
- Enhanced logging in HopScalingModule to provide detailed histogram statistics.
- Modified test cases to ensure comprehensive coverage of new histogram behaviors and sampling logic.
- Improved node ID distribution in tests to better exercise sampling mechanisms.
- Ensured that filtering denominators are held for 12 hours before dropping, enhancing stability in sampling.
* Refactor CompactHistogram to support 13-hour activity tracking and introduce politeness regimes
- Updated the bitfield structure to accommodate 13-hour seen tracking.
- Changed the logic in rollHour() to analyze activity over the last 0-2 hours vs. 1-3 hours for politeness factor calculation.
- Introduced three politeness levels: GENEROUS, DEFAULT, and STRICT based on recent activity ratios.
- Adjusted filtering and sampling logic to reflect the new 13-hour tracking period.
- Updated unit tests to validate new behavior and ensure proper functionality of politeness regimes.
* Enhance CompactHistogram and HopScalingModule for improved sampling and decision-making
- Introduced a session-specific hash seed in CompactHistogram to reduce bias in node ID sampling.
- Updated sampling logic to use hashed node IDs instead of raw IDs for filtering and entry management.
- Added histogram rollover tracking in HopScalingModule to ensure proper decision-making after initial data collection.
- Adjusted logging to reflect the active state of the histogram and its comparison with NodeDB advisory hops.
- Enhanced unit tests to validate new sampling logic and memory layout changes.
* Expose hashNodeId for testing in CompactHistogram
* Add mesh trend statistics to CompactHistogram for enhanced activity tracking
* Implement histogram state persistence in CompactHistogram with save and load functions
* Refactor CompactHistogram to improve entry management and enhance rollHour logging
* feat: add HopScalingModule for adaptive hop limit recommendations
Introduces HopScalingModule, a sampled hop-distance histogram that
recommends the minimum hop limit needed to reach ~40 nodes, and
automatically reducing the hops as the mesh grows.
Key design:
- 512-byte packed histogram (128 × 4-byte Record entries) embedded
in a new HopScalingModule.
- Each Record: 16-bit node hash, 3-bit hop distance, 13-bit seen bitmap
- Sampling filter: only nodes where (hash & (denom-1)) == 0 are kept;
denominator doubles on overflow and halves when utilisation is low
- Hourly rollHour(): tallies per-hop counts, walks scaled buckets to
find the minimum hop satisfying TARGET_AFFECTED_NODES (40), applies a
politeness extension based on recent/older activity ratio, shifts all
seen bitmaps, and persists state to /prefs/hopScalingState.bin
- Hop recommendation gated by bootstrap (requires >=1 rollHour before
overriding HOP_MAX)
- NodeDB calls samplePacketForHistogram() on every non-MQTT rx packet
- Module also estimates total mesh size and logs useful information about
mesh characteristics.
Changes:
- src/modules/HopScalingModule.h/.cpp: new module
- src/mesh/NodeDB.cpp: wire up samplePacketForHistogram
- src/mesh/Router.cpp: consume getLastRequiredHop()
- test/test_hop_scaling/: 12-test suite covering all mesh topologies and
anticipated operational requirements
* test: increase run iterations in sparse to dense transition test
* feat: refactor HopScalingModule to use RUNS_PER_HOUR constant and improve logging
* feat: enhance HopScalingModule with filtering denominator management and add tests for state transitions
* refactor: remove CompactHistogram module and related files
* address copilot review comments
* Tweak: packet sampling only lora
* ove role-based hop floor logic and related definitions into the module - keep it in one place.
* Refactor MockNodeDB to use nodeInfoLiteSetBit for MQTT flag setting
* Refactor hop scaling parameters and logic to integer maths and put default values in defaults.h. Small flash size reduction, no functional impact.
* Update unit test preprocessor directives to PIO_UNIT_TESTING for consistency
* refactor: improve test output organization and clarity in hop scaling tests
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* fix(t5s3-epaper): increase ED047TC1 margins to 16px on all sides
Tested on device — 16px uniform margins look noticeably cleaner than
the previous asymmetric 8–9px values. Canvas shrinks from 944×523 to
928×508 (H_OFFSET_BYTES=2, V_OFFSET_TOP/BOTTOM=16).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix(t5s3-epaper): remove EINK_EDGE_LINES calibration diagnostic from ED047TC1
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix(t5s3-epaper): align TOUCH_THRESHOLD_X with TOUCH_THRESHOLD_Y (40px)
X axis threshold was 60 while Y was 40, causing asymmetric swipe detection.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com>
* Add low bandwidth conversions to MeshRadio
* Add test cases for new bandwidth conversion values (8/10/16/21/42) and round-trip tests
---------
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
Move default frequency (slot) override from RegionProfile to RegionInfo (set per-region).
This is usually set to `0`, but will be especially useful for Ham modes where each region default must fit within a band plan.
Co-authored-by: Copilot <copilot@github.com>
* Initial plan
* Fix SensorLib isBitSet macro conflict with SparkFun MMC5983MA library
SensorLib 0.3.4 defines isBitSet as a C preprocessor macro in SensorLib.h,
which conflicts with SparkFun_MMC5983MA_IO.h's class method of the same name.
When both libraries are included in the same translation unit (e.g., via
configuration.h → SensorRtcHelper.hpp → SensorLib chain, alongside the
SparkFun MMC5983MA library in lib_deps), the macro expansion causes compile
errors like 'expected unqualified-id before const'.
Fix: undefine the isBitSet macro right after including SensorRtcHelper.hpp
in configuration.h, so it doesn't interfere with SparkFun's class method.
---------
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
- Redefine isConnected in terms of nimbleBluetoothConnHandle. isConnected was not safe because BLEServer::getConnectedCount is not thread-safe (https://github.com/espressif/arduino-esp32/issues/12538) while isConnected is called from various threads. Now we can avoid checking bleServer every time before calling isConnected.
- getRssi: don't try to "populate nimbleBluetoothConnHandle", that requires calling BLEServer::getPeerDevices which is not thread-safe (same issue as above).
* add noise floor
* Sliding window noise floor
* Add getCurrentRSSI() to SimRadio for noise floor support
* Remove sendLocalStatsToPhone call from runOnce
* Change noise floor to int32_t type
* Use int32_t for RSSI sample storage in noise floor
* Remove float cast from noise floor assignment
* Fix Copilot review issues: fix noise floor logic, types, and null pointer
- Use robust busyTx/busyRx checks instead of simple isReceiving check
- Initialize noiseFloorSamples to NOISE_FLOOR_MIN instead of 0
- Move noise_floor assignment inside null check to prevent potential crash
- Change getNoiseFloor() and getAverageNoiseFloor() to return int32_t
- Fix RSSI validation to check for positive values (rssi > 0)
- Fix format specifier from %.1f to %d for int32_t
- Update comments to accurately reflect the sampling logic
* Fix RSSI condition to include zero value
* Change noise floor initialization to zero
* Disable noise floor for LR11x0 chips: getRSSI(bool) unsupported
* Remove updateNoiseFloor call from onNotify to avoid radio queue overflow
Per PR review feedback, calling updateNoiseFloor() in onNotify() for every
ISR event (ISR_TX, ISR_RX, TRANSMIT_DELAY_COMPLETED) can cause the LoRa
radio queue to get full. The noise floor sampling still happens in
startReceive() and after transmitting.
* fix lr11x0 current rssi
* Address noise floor review comments
* Address Copilot SimRadio noise floor comments
* Fix RadioLibInterface formatting
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* feat: add Raspberry Pi Pico 2 + W5500 + E22-900M30S variant
Adds community variant for Raspberry Pi Pico 2 (RP2350, 4 MB flash)
with external WIZnet W5500 Ethernet module and EBYTE E22-900M30S LoRa
module (SX1262, 30 dBm PA, 868/915 MHz).
Key details:
- LoRa on SPI1: GP10/11/12/13 (SCK/MOSI/MISO/CS), RST=GP15,
DIO1=GP14, BUSY=GP2, RXEN=GP3 (held HIGH via SX126X_ANT_SW)
- W5500 on SPI0: GP16/17/18/19/20 (MISO/CS/SCK/MOSI/RST)
- SX126X_DIO2_AS_RF_SWITCH: DIO2→TXEN bridge on module handles PA
- SX126X_DIO3_TCXO_VOLTAGE 1.8: TCXO support via EBYTE_E22 flags
- DHCP timeout reduced to 10 s to avoid blocking LoRa startup
- GPS on UART1/Serial2: GP8 TX, GP9 RX
- Reuses WIZNET_5500_EVB_PICO2 code paths for Ethernet init
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* pico2_w5500_e22: rename define and address review feedback
Rename WIZNET_5500_EVB_PICO2 to PICO2_W5500_E22 so the variant-specific
define matches the variant directory name and isn't confused with an
on-board EVB SKU.
Review fixes from PR #10135:
- Gate the 10 s Ethernet DHCP timeout behind PICO2_W5500_E22 so other
Ethernet builds keep the default 60 s behavior; apply the same timeout
to reconnectETH() for consistency.
- Drop the unused -D EBYTE_E22 flag; EBYTE_E22_900M30S already selects
TX_GAIN_LORA / SX126X_MAX_POWER in src/configuration.h.
- Rewrite "on-board W5500" comments to describe the external module.
- Correct README TX_GAIN_LORA value (7, not 10) and drop the EBYTE_E22
row.
* fix(pico2_w5500_e22): drop DEBUG_RP2040_PORT=Serial
The arduino-pico framework hooks _write() when DEBUG_RP2040_PORT=Serial
is set and dumps raw debug bytes onto USB CDC, corrupting any binary
protobuf stream sent through StreamAPI (e.g. `meshtastic --port COMx`).
The variant excludes BT and WiFi, so the primary client transport is
Ethernet TCP via ethServerAPI — unaffected — but users who configure
the node over USB serial would see protobuf decode failures from
debug-byte interleaving. Removing the flag restores clean USB CDC.
Debug output can still be enabled per-build by adding -D DEBUG_RP2040_PORT=Serial1
to redirect to UART0 instead of USB CDC.
* style(pico2_w5500_e22): apply trunk fmt — fixes Trunk Check
- variant.h: clang-format 16.0.3 (drop manual #define alignment)
- README.md: prettier + add `text` language to fenced code blocks (markdownlint MD040)
- wiring.svg: svgo optimization
Resolves the Trunk Check Runner failure on this PR (3 unformatted
files + 8 markdownlint issues). No functional changes.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* refactor(pico2_w5500_e22): address review — move to rp2350/diy, generic guards
Maintainer feedback from NomDeTom on PR #10135:
- Move the variant from variants/rp2350/ to variants/rp2350/diy/ to
distinguish DIY from prebuilt boards (matches the variants/*/diy/
pattern; still discovered via the existing variants/*/diy/*/platformio.ini
glob in the root platformio.ini).
- Replace the board-name macro PICO2_W5500_E22 in shared code with a
generic capability macro USE_ARDUINO_ETHERNET, defined from variant.h.
DebugConfiguration.h / ethServerAPI.h / ethClient.cpp no longer
reference a board name.
- Drop the architecture.h hook entirely: variant.h now defines PRIVATE_HW,
which the existing `#elif defined(PRIVATE_HW)` branch already handles.
No functional change. Build verified: pico2_w5500_e22 SUCCESS
(RAM 19.2%, Flash 28.1%).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* chore(pico2_w5500_e22): drop unoptimized wiring.svg to fix trunk fmt check
---------
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* fix(telemetry): stop emitting -0.001V sentinel when battery unavailable (#7958)
* address review: use int32_t for batteryMv to avoid uint16_t signed wrap
SHTXXSensor (the SHT4x driver) includes <SHTSensor.h>, gated by
__has_include(<SHTSensor.h>). That header ships in Sensirion/arduino-sht.
Adafruit_SHT4X ships Adafruit_SHT4X.h and has no consumer anywhere in
src/, so the SHT40 driver was silently excluded from the build -- the
nRF54L15 variant could not read an SHT4x sensor as committed in #10193.
Replace the dead Adafruit_SHT4X libdep with arduino-sht v1.2.6.
Validated on nRF54L15-DK: SHT40-AD1B @0x44, 24.3h soak, 0 reboots,
temperature/humidity telemetry stable end-to-end.
Co-authored-by: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Enable Lite and Narrow regions and introduce getEffectiveDutyCycle for Lite profiles
* Add TrafficType enum and extend getConfiguredOrDefaultMsScaled to manage based on regionProfile settings
* Refactor telemetry modules to include TrafficType in getConfiguredOrDefaultMsScaled calls
* Update submodule protobufs to latest commit
* Add support for new region presets and modem presets in menu options
* Add new LoRa region codes and modem presets for EU bands
* boof
* Add modem presets for LITE and NARROW configurations
* Update subproject commit reference in protobufs
* Update protobufs
* Refactor modem preset definitions to use macro for consistency and clarity
* Refactor modem preset cases to use PRESET macro for consistency
* fix: update LoRa region code for EU 868 narrowband configuration
Co-authored-by: Copilot <copilot@github.com>
* Fix test suite failure
Co-authored-by: Copilot <copilot@github.com>
* Add override slot override - for when one override isn't enough.
Co-authored-by: Copilot <copilot@github.com>
* address copilot comments
---------
Co-authored-by: Copilot <copilot@github.com>
Adjust keyboard cell height calculation for better layout consistency across different screen sizes.
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Current release tags are actually based upon the latest state of `develop` currently...
Specify target_commitish to always use the commit that triggered the build
* Enabled SX_LNA_EN by default
* Update I2C configuration for IO direction and pull settings
---------
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
LittleatonandGitHub
pdxlocationsandGitHub
AustinandGitHub
Thomas GöttgensandGitHub
nomdetom
oscgonferandGitHub
Chloe BethelandGitHub
Catalin PatuleaandGitHub
Alexander BalyaandGitHub
ManuelandGitHub
Jaime RoldanandGitHub
κρμγandGitHub
